linux/drivers/scsi/scsi_debug.c

4031 lines
117 KiB
C
Raw Normal View History

/*
* vvvvvvvvvvvvvvvvvvvvvvv Original vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
* Copyright (C) 1992 Eric Youngdale
* Simulate a host adapter with 2 disks attached. Do a lot of checking
* to make sure that we are not getting blocks mixed up, and PANIC if
* anything out of the ordinary is seen.
* ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
* This version is more generic, simulating a variable number of disk
* (or disk like devices) sharing a common amount of RAM. To be more
* realistic, the simulated devices have the transport attributes of
* SAS disks.
*
*
* For documentation see http://sg.danny.cz/sg/sdebug26.html
*
* D. Gilbert (dpg) work for Magneto-Optical device test [20010421]
* dpg: work for devfs large number of disks [20010809]
* forked for lk 2.5 series [20011216, 20020101]
* use vmalloc() more inquiry+mode_sense [20020302]
* add timers for delayed responses [20020721]
* Patrick Mansfield <patmans@us.ibm.com> max_luns+scsi_level [20021031]
* Mike Anderson <andmike@us.ibm.com> sysfs work [20021118]
* dpg: change style of boot options to "scsi_debug.num_tgts=2" and
* module options to "modprobe scsi_debug num_tgts=2" [20021221]
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/timer.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/genhd.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
#include <linux/crc-t10dif.h>
#include <net/checksum.h>
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dbg.h>
#include "sd.h"
#include "scsi_logging.h"
#define SCSI_DEBUG_VERSION "1.82"
static const char * scsi_debug_version_date = "20100324";
/* Additional Sense Code (ASC) */
#define NO_ADDITIONAL_SENSE 0x0
#define LOGICAL_UNIT_NOT_READY 0x4
#define UNRECOVERED_READ_ERR 0x11
#define PARAMETER_LIST_LENGTH_ERR 0x1a
#define INVALID_OPCODE 0x20
#define ADDR_OUT_OF_RANGE 0x21
#define INVALID_COMMAND_OPCODE 0x20
#define INVALID_FIELD_IN_CDB 0x24
#define INVALID_FIELD_IN_PARAM_LIST 0x26
#define POWERON_RESET 0x29
#define SAVING_PARAMS_UNSUP 0x39
#define TRANSPORT_PROBLEM 0x4b
#define THRESHOLD_EXCEEDED 0x5d
#define LOW_POWER_COND_ON 0x5e
/* Additional Sense Code Qualifier (ASCQ) */
#define ACK_NAK_TO 0x3
#define SDEBUG_TAGGED_QUEUING 0 /* 0 | MSG_SIMPLE_TAG | MSG_ORDERED_TAG */
/* Default values for driver parameters */
#define DEF_NUM_HOST 1
#define DEF_NUM_TGTS 1
#define DEF_MAX_LUNS 1
/* With these defaults, this driver will make 1 host with 1 target
* (id 0) containing 1 logical unit (lun 0). That is 1 device.
*/
#define DEF_DELAY 1
#define DEF_DEV_SIZE_MB 8
#define DEF_EVERY_NTH 0
#define DEF_NUM_PARTS 0
#define DEF_OPTS 0
#define DEF_SCSI_LEVEL 5 /* INQUIRY, byte2 [5->SPC-3] */
#define DEF_PTYPE 0
#define DEF_D_SENSE 0
#define DEF_NO_LUN_0 0
#define DEF_VIRTUAL_GB 0
#define DEF_FAKE_RW 0
#define DEF_VPD_USE_HOSTNO 1
#define DEF_SECTOR_SIZE 512
#define DEF_DIX 0
#define DEF_DIF 0
#define DEF_GUARD 0
#define DEF_ATO 1
#define DEF_PHYSBLK_EXP 0
#define DEF_LOWEST_ALIGNED 0
#define DEF_OPT_BLKS 64
#define DEF_UNMAP_MAX_BLOCKS 0xFFFFFFFF
#define DEF_UNMAP_MAX_DESC 256
#define DEF_UNMAP_GRANULARITY 1
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
#define DEF_UNMAP_ALIGNMENT 0
#define DEF_TPWS 0
#define DEF_TPU 0
/* bit mask values for scsi_debug_opts */
#define SCSI_DEBUG_OPT_NOISE 1
#define SCSI_DEBUG_OPT_MEDIUM_ERR 2
#define SCSI_DEBUG_OPT_TIMEOUT 4
#define SCSI_DEBUG_OPT_RECOVERED_ERR 8
#define SCSI_DEBUG_OPT_TRANSPORT_ERR 16
#define SCSI_DEBUG_OPT_DIF_ERR 32
#define SCSI_DEBUG_OPT_DIX_ERR 64
/* When "every_nth" > 0 then modulo "every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
* - a TRANSPORT_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
*
* When "every_nth" < 0 then after "- every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
* - a TRANSPORT_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
* This will continue until some other action occurs (e.g. the user
* writing a new value (other than -1 or 1) to every_nth via sysfs).
*/
/* when 1==SCSI_DEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this
* sector on read commands: */
#define OPT_MEDIUM_ERR_ADDR 0x1234 /* that's sector 4660 in decimal */
/* If REPORT LUNS has luns >= 256 it can choose "flat space" (value 1)
* or "peripheral device" addressing (value 0) */
#define SAM2_LUN_ADDRESS_METHOD 0
#define SAM2_WLUN_REPORT_LUNS 0xc101
/* Can queue up to this number of commands. Typically commands that
* that have a non-zero delay are queued. */
#define SCSI_DEBUG_CANQUEUE 255
static int scsi_debug_add_host = DEF_NUM_HOST;
static int scsi_debug_delay = DEF_DELAY;
static int scsi_debug_dev_size_mb = DEF_DEV_SIZE_MB;
static int scsi_debug_every_nth = DEF_EVERY_NTH;
static int scsi_debug_max_luns = DEF_MAX_LUNS;
static int scsi_debug_max_queue = SCSI_DEBUG_CANQUEUE;
static int scsi_debug_num_parts = DEF_NUM_PARTS;
static int scsi_debug_no_uld = 0;
static int scsi_debug_num_tgts = DEF_NUM_TGTS; /* targets per host */
static int scsi_debug_opts = DEF_OPTS;
static int scsi_debug_scsi_level = DEF_SCSI_LEVEL;
static int scsi_debug_ptype = DEF_PTYPE; /* SCSI peripheral type (0==disk) */
static int scsi_debug_dsense = DEF_D_SENSE;
static int scsi_debug_no_lun_0 = DEF_NO_LUN_0;
static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB;
static int scsi_debug_fake_rw = DEF_FAKE_RW;
static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO;
static int scsi_debug_sector_size = DEF_SECTOR_SIZE;
static int scsi_debug_dix = DEF_DIX;
static int scsi_debug_dif = DEF_DIF;
static int scsi_debug_guard = DEF_GUARD;
static int scsi_debug_ato = DEF_ATO;
static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP;
static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED;
static int scsi_debug_opt_blks = DEF_OPT_BLKS;
static unsigned int scsi_debug_unmap_max_desc = DEF_UNMAP_MAX_DESC;
static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
static unsigned int scsi_debug_tpws = DEF_TPWS;
static unsigned int scsi_debug_tpu = DEF_TPU;
static int scsi_debug_cmnd_count = 0;
#define DEV_READONLY(TGT) (0)
#define DEV_REMOVEABLE(TGT) (0)
static unsigned int sdebug_store_sectors;
static sector_t sdebug_capacity; /* in sectors */
/* old BIOS stuff, kernel may get rid of them but some mode sense pages
may still need them */
static int sdebug_heads; /* heads per disk */
static int sdebug_cylinders_per; /* cylinders per surface */
static int sdebug_sectors_per; /* sectors per cylinder */
#define SDEBUG_MAX_PARTS 4
#define SDEBUG_SENSE_LEN 32
#define SCSI_DEBUG_MAX_CMD_LEN 32
struct sdebug_dev_info {
struct list_head dev_list;
unsigned char sense_buff[SDEBUG_SENSE_LEN]; /* weak nexus */
unsigned int channel;
unsigned int target;
unsigned int lun;
struct sdebug_host_info *sdbg_host;
unsigned int wlun;
char reset;
char stopped;
char used;
};
struct sdebug_host_info {
struct list_head host_list;
struct Scsi_Host *shost;
struct device dev;
struct list_head dev_info_list;
};
#define to_sdebug_host(d) \
container_of(d, struct sdebug_host_info, dev)
static LIST_HEAD(sdebug_host_list);
static DEFINE_SPINLOCK(sdebug_host_list_lock);
typedef void (* done_funct_t) (struct scsi_cmnd *);
struct sdebug_queued_cmd {
int in_use;
struct timer_list cmnd_timer;
done_funct_t done_funct;
struct scsi_cmnd * a_cmnd;
int scsi_result;
};
static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE];
static unsigned char * fake_storep; /* ramdisk storage */
static unsigned char *dif_storep; /* protection info */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static void *map_storep; /* provisioning map */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static unsigned long map_size;
static int num_aborts = 0;
static int num_dev_resets = 0;
static int num_bus_resets = 0;
static int num_host_resets = 0;
static int dix_writes;
static int dix_reads;
static int dif_errors;
static DEFINE_SPINLOCK(queued_arr_lock);
static DEFINE_RWLOCK(atomic_rw);
static char sdebug_proc_name[] = "scsi_debug";
static struct bus_type pseudo_lld_bus;
static inline sector_t dif_offset(sector_t sector)
{
return sector << 3;
}
static struct device_driver sdebug_driverfs_driver = {
.name = sdebug_proc_name,
.bus = &pseudo_lld_bus,
};
static const int check_condition_result =
(DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
static const int illegal_condition_result =
(DRIVER_SENSE << 24) | (DID_ABORT << 16) | SAM_STAT_CHECK_CONDITION;
static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
0, 0, 0x2, 0x4b};
static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
static int sdebug_add_adapter(void);
static void sdebug_remove_adapter(void);
static void sdebug_max_tgts_luns(void)
{
struct sdebug_host_info *sdbg_host;
struct Scsi_Host *hpnt;
spin_lock(&sdebug_host_list_lock);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
hpnt = sdbg_host->shost;
if ((hpnt->this_id >= 0) &&
(scsi_debug_num_tgts > hpnt->this_id))
hpnt->max_id = scsi_debug_num_tgts + 1;
else
hpnt->max_id = scsi_debug_num_tgts;
/* scsi_debug_max_luns; */
hpnt->max_lun = SAM2_WLUN_REPORT_LUNS;
}
spin_unlock(&sdebug_host_list_lock);
}
static void mk_sense_buffer(struct sdebug_dev_info *devip, int key,
int asc, int asq)
{
unsigned char *sbuff;
sbuff = devip->sense_buff;
memset(sbuff, 0, SDEBUG_SENSE_LEN);
scsi_build_sense_buffer(scsi_debug_dsense, sbuff, key, asc, asq);
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: [sense_key,asc,ascq]: "
"[0x%x,0x%x,0x%x]\n", key, asc, asq);
}
static void get_data_transfer_info(unsigned char *cmd,
unsigned long long *lba, unsigned int *num,
u32 *ei_lba)
{
*ei_lba = 0;
switch (*cmd) {
case VARIABLE_LENGTH_CMD:
*lba = (u64)cmd[19] | (u64)cmd[18] << 8 |
(u64)cmd[17] << 16 | (u64)cmd[16] << 24 |
(u64)cmd[15] << 32 | (u64)cmd[14] << 40 |
(u64)cmd[13] << 48 | (u64)cmd[12] << 56;
*ei_lba = (u32)cmd[23] | (u32)cmd[22] << 8 |
(u32)cmd[21] << 16 | (u32)cmd[20] << 24;
*num = (u32)cmd[31] | (u32)cmd[30] << 8 | (u32)cmd[29] << 16 |
(u32)cmd[28] << 24;
break;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
case WRITE_SAME_16:
case WRITE_16:
case READ_16:
*lba = (u64)cmd[9] | (u64)cmd[8] << 8 |
(u64)cmd[7] << 16 | (u64)cmd[6] << 24 |
(u64)cmd[5] << 32 | (u64)cmd[4] << 40 |
(u64)cmd[3] << 48 | (u64)cmd[2] << 56;
*num = (u32)cmd[13] | (u32)cmd[12] << 8 | (u32)cmd[11] << 16 |
(u32)cmd[10] << 24;
break;
case WRITE_12:
case READ_12:
*lba = (u32)cmd[5] | (u32)cmd[4] << 8 | (u32)cmd[3] << 16 |
(u32)cmd[2] << 24;
*num = (u32)cmd[9] | (u32)cmd[8] << 8 | (u32)cmd[7] << 16 |
(u32)cmd[6] << 24;
break;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
case WRITE_SAME:
case WRITE_10:
case READ_10:
case XDWRITEREAD_10:
*lba = (u32)cmd[5] | (u32)cmd[4] << 8 | (u32)cmd[3] << 16 |
(u32)cmd[2] << 24;
*num = (u32)cmd[8] | (u32)cmd[7] << 8;
break;
case WRITE_6:
case READ_6:
*lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
(u32)(cmd[1] & 0x1f) << 16;
*num = (0 == cmd[4]) ? 256 : cmd[4];
break;
default:
break;
}
}
static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
{
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
printk(KERN_INFO "scsi_debug: ioctl: cmd=0x%x\n", cmd);
}
return -EINVAL;
/* return -ENOTTY; // correct return but upsets fdisk */
}
static int check_readiness(struct scsi_cmnd * SCpnt, int reset_only,
struct sdebug_dev_info * devip)
{
if (devip->reset) {
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Reporting Unit "
"attention: power on reset\n");
devip->reset = 0;
mk_sense_buffer(devip, UNIT_ATTENTION, POWERON_RESET, 0);
return check_condition_result;
}
if ((0 == reset_only) && devip->stopped) {
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Reporting Not "
"ready: initializing command required\n");
mk_sense_buffer(devip, NOT_READY, LOGICAL_UNIT_NOT_READY,
0x2);
return check_condition_result;
}
return 0;
}
/* Returns 0 if ok else (DID_ERROR << 16). Sets scp->resid . */
static int fill_from_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
int arr_len)
{
int act_len;
struct scsi_data_buffer *sdb = scsi_in(scp);
if (!sdb->length)
return 0;
if (!(scsi_bidi_cmnd(scp) || scp->sc_data_direction == DMA_FROM_DEVICE))
return (DID_ERROR << 16);
act_len = sg_copy_from_buffer(sdb->table.sgl, sdb->table.nents,
arr, arr_len);
if (sdb->resid)
sdb->resid -= act_len;
else
sdb->resid = scsi_bufflen(scp) - act_len;
return 0;
}
/* Returns number of bytes fetched into 'arr' or -1 if error. */
static int fetch_to_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
int arr_len)
{
if (!scsi_bufflen(scp))
return 0;
if (!(scsi_bidi_cmnd(scp) || scp->sc_data_direction == DMA_TO_DEVICE))
return -1;
return scsi_sg_copy_to_buffer(scp, arr, arr_len);
}
static const char * inq_vendor_id = "Linux ";
static const char * inq_product_id = "scsi_debug ";
static const char * inq_product_rev = "0004";
static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
int target_dev_id, int dev_id_num,
const char * dev_id_str,
int dev_id_str_len)
{
int num, port_a;
char b[32];
port_a = target_dev_id + 1;
/* T10 vendor identifier field format (faked) */
arr[0] = 0x2; /* ASCII */
arr[1] = 0x1;
arr[2] = 0x0;
memcpy(&arr[4], inq_vendor_id, 8);
memcpy(&arr[12], inq_product_id, 16);
memcpy(&arr[28], dev_id_str, dev_id_str_len);
num = 8 + 16 + dev_id_str_len;
arr[3] = num;
num += 4;
if (dev_id_num >= 0) {
/* NAA-5, Logical unit identifier (binary) */
arr[num++] = 0x1; /* binary (not necessarily sas) */
arr[num++] = 0x3; /* PIV=0, lu, naa */
arr[num++] = 0x0;
arr[num++] = 0x8;
arr[num++] = 0x53; /* naa-5 ieee company id=0x333333 (fake) */
arr[num++] = 0x33;
arr[num++] = 0x33;
arr[num++] = 0x30;
arr[num++] = (dev_id_num >> 24);
arr[num++] = (dev_id_num >> 16) & 0xff;
arr[num++] = (dev_id_num >> 8) & 0xff;
arr[num++] = dev_id_num & 0xff;
/* Target relative port number */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x94; /* PIV=1, target port, rel port */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x4; /* length */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
arr[num++] = 0x1; /* relative port A */
}
/* NAA-5, Target port identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x93; /* piv=1, target port, naa */
arr[num++] = 0x0;
arr[num++] = 0x8;
arr[num++] = 0x52; /* naa-5, company id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (port_a >> 24);
arr[num++] = (port_a >> 16) & 0xff;
arr[num++] = (port_a >> 8) & 0xff;
arr[num++] = port_a & 0xff;
/* NAA-5, Target port group identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x95; /* piv=1, target port group id */
arr[num++] = 0x0;
arr[num++] = 0x4;
arr[num++] = 0;
arr[num++] = 0;
arr[num++] = (port_group_id >> 8) & 0xff;
arr[num++] = port_group_id & 0xff;
/* NAA-5, Target device identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0xa3; /* piv=1, target device, naa */
arr[num++] = 0x0;
arr[num++] = 0x8;
arr[num++] = 0x52; /* naa-5, company id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (target_dev_id >> 24);
arr[num++] = (target_dev_id >> 16) & 0xff;
arr[num++] = (target_dev_id >> 8) & 0xff;
arr[num++] = target_dev_id & 0xff;
/* SCSI name string: Target device identifier */
arr[num++] = 0x63; /* proto=sas, UTF-8 */
arr[num++] = 0xa8; /* piv=1, target device, SCSI name string */
arr[num++] = 0x0;
arr[num++] = 24;
memcpy(arr + num, "naa.52222220", 12);
num += 12;
snprintf(b, sizeof(b), "%08X", target_dev_id);
memcpy(arr + num, b, 8);
num += 8;
memset(arr + num, 0, 4);
num += 4;
return num;
}
static unsigned char vpd84_data[] = {
/* from 4th byte */ 0x22,0x22,0x22,0x0,0xbb,0x0,
0x22,0x22,0x22,0x0,0xbb,0x1,
0x22,0x22,0x22,0x0,0xbb,0x2,
};
static int inquiry_evpd_84(unsigned char * arr)
{
memcpy(arr, vpd84_data, sizeof(vpd84_data));
return sizeof(vpd84_data);
}
static int inquiry_evpd_85(unsigned char * arr)
{
int num = 0;
const char * na1 = "https://www.kernel.org/config";
const char * na2 = "http://www.kernel.org/log";
int plen, olen;
arr[num++] = 0x1; /* lu, storage config */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
olen = strlen(na1);
plen = olen + 1;
if (plen % 4)
plen = ((plen / 4) + 1) * 4;
arr[num++] = plen; /* length, null termianted, padded */
memcpy(arr + num, na1, olen);
memset(arr + num + olen, 0, plen - olen);
num += plen;
arr[num++] = 0x4; /* lu, logging */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
olen = strlen(na2);
plen = olen + 1;
if (plen % 4)
plen = ((plen / 4) + 1) * 4;
arr[num++] = plen; /* length, null terminated, padded */
memcpy(arr + num, na2, olen);
memset(arr + num + olen, 0, plen - olen);
num += plen;
return num;
}
/* SCSI ports VPD page */
static int inquiry_evpd_88(unsigned char * arr, int target_dev_id)
{
int num = 0;
int port_a, port_b;
port_a = target_dev_id + 1;
port_b = port_a + 1;
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
arr[num++] = 0x1; /* relative port 1 (primary) */
memset(arr + num, 0, 6);
num += 6;
arr[num++] = 0x0;
arr[num++] = 12; /* length tp descriptor */
/* naa-5 target port identifier (A) */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x93; /* PIV=1, target port, NAA */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x8; /* length */
arr[num++] = 0x52; /* NAA-5, company_id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (port_a >> 24);
arr[num++] = (port_a >> 16) & 0xff;
arr[num++] = (port_a >> 8) & 0xff;
arr[num++] = port_a & 0xff;
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
arr[num++] = 0x2; /* relative port 2 (secondary) */
memset(arr + num, 0, 6);
num += 6;
arr[num++] = 0x0;
arr[num++] = 12; /* length tp descriptor */
/* naa-5 target port identifier (B) */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x93; /* PIV=1, target port, NAA */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x8; /* length */
arr[num++] = 0x52; /* NAA-5, company_id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (port_b >> 24);
arr[num++] = (port_b >> 16) & 0xff;
arr[num++] = (port_b >> 8) & 0xff;
arr[num++] = port_b & 0xff;
return num;
}
static unsigned char vpd89_data[] = {
/* from 4th byte */ 0,0,0,0,
'l','i','n','u','x',' ',' ',' ',
'S','A','T',' ','s','c','s','i','_','d','e','b','u','g',' ',' ',
'1','2','3','4',
0x34,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,
0xec,0,0,0,
0x5a,0xc,0xff,0x3f,0x37,0xc8,0x10,0,0,0,0,0,0x3f,0,0,0,
0,0,0,0,0x58,0x58,0x58,0x58,0x58,0x58,0x58,0x58,0x20,0x20,0x20,0x20,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0,0,0,0x40,0x4,0,0x2e,0x33,
0x38,0x31,0x20,0x20,0x20,0x20,0x54,0x53,0x38,0x33,0x30,0x30,0x33,0x31,
0x53,0x41,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
0x20,0x20,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
0x10,0x80,
0,0,0,0x2f,0,0,0,0x2,0,0x2,0x7,0,0xff,0xff,0x1,0,
0x3f,0,0xc1,0xff,0x3e,0,0x10,0x1,0xb0,0xf8,0x50,0x9,0,0,0x7,0,
0x3,0,0x78,0,0x78,0,0xf0,0,0x78,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0x2,0,0,0,0,0,0,0,
0x7e,0,0x1b,0,0x6b,0x34,0x1,0x7d,0x3,0x40,0x69,0x34,0x1,0x3c,0x3,0x40,
0x7f,0x40,0,0,0,0,0xfe,0xfe,0,0,0,0,0,0xfe,0,0,
0,0,0,0,0,0,0,0,0xb0,0xf8,0x50,0x9,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0x1,0,0xb0,0xf8,0x50,0x9,0xb0,0xf8,0x50,0x9,0x20,0x20,0x2,0,0xb6,0x42,
0,0x80,0x8a,0,0x6,0x3c,0xa,0x3c,0xff,0xff,0xc6,0x7,0,0x1,0,0x8,
0xf0,0xf,0,0x10,0x2,0,0x30,0,0,0,0,0,0,0,0x6,0xfe,
0,0,0x2,0,0x50,0,0x8a,0,0x4f,0x95,0,0,0x21,0,0xb,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0xa5,0x51,
};
static int inquiry_evpd_89(unsigned char * arr)
{
memcpy(arr, vpd89_data, sizeof(vpd89_data));
return sizeof(vpd89_data);
}
/* Block limits VPD page (SBC-3) */
static unsigned char vpdb0_data[] = {
/* from 4th byte */ 0,0,0,4, 0,0,0x4,0, 0,0,0,64,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
};
static int inquiry_evpd_b0(unsigned char * arr)
{
unsigned int gran;
memcpy(arr, vpdb0_data, sizeof(vpdb0_data));
/* Optimal transfer length granularity */
gran = 1 << scsi_debug_physblk_exp;
arr[2] = (gran >> 8) & 0xff;
arr[3] = gran & 0xff;
/* Maximum Transfer Length */
if (sdebug_store_sectors > 0x400) {
arr[4] = (sdebug_store_sectors >> 24) & 0xff;
arr[5] = (sdebug_store_sectors >> 16) & 0xff;
arr[6] = (sdebug_store_sectors >> 8) & 0xff;
arr[7] = sdebug_store_sectors & 0xff;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
/* Optimal Transfer Length */
put_unaligned_be32(scsi_debug_opt_blks, &arr[8]);
if (scsi_debug_tpu) {
/* Maximum Unmap LBA Count */
put_unaligned_be32(scsi_debug_unmap_max_blocks, &arr[16]);
/* Maximum Unmap Block Descriptor Count */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
put_unaligned_be32(scsi_debug_unmap_max_desc, &arr[20]);
}
/* Unmap Granularity Alignment */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (scsi_debug_unmap_alignment) {
put_unaligned_be32(scsi_debug_unmap_alignment, &arr[28]);
arr[28] |= 0x80; /* UGAVALID */
}
/* Optimal Unmap Granularity */
put_unaligned_be32(scsi_debug_unmap_granularity, &arr[24]);
return 0x3c; /* Mandatory page length for thin provisioning */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return sizeof(vpdb0_data);
}
/* Block device characteristics VPD page (SBC-3) */
static int inquiry_evpd_b1(unsigned char *arr)
{
memset(arr, 0, 0x3c);
arr[0] = 0;
arr[1] = 1; /* non rotating medium (e.g. solid state) */
arr[2] = 0;
arr[3] = 5; /* less than 1.8" */
return 0x3c;
}
/* Thin provisioning VPD page (SBC-3) */
static int inquiry_evpd_b2(unsigned char *arr)
{
memset(arr, 0, 0x8);
arr[0] = 0; /* threshold exponent */
if (scsi_debug_tpu)
arr[1] = 1 << 7;
if (scsi_debug_tpws)
arr[1] |= 1 << 6;
return 0x8;
}
#define SDEBUG_LONG_INQ_SZ 96
#define SDEBUG_MAX_INQ_ARR_SZ 584
static int resp_inquiry(struct scsi_cmnd * scp, int target,
struct sdebug_dev_info * devip)
{
unsigned char pq_pdt;
unsigned char * arr;
unsigned char *cmd = (unsigned char *)scp->cmnd;
int alloc_len, n, ret;
alloc_len = (cmd[3] << 8) + cmd[4];
arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
if (! arr)
return DID_REQUEUE << 16;
if (devip->wlun)
pq_pdt = 0x1e; /* present, wlun */
else if (scsi_debug_no_lun_0 && (0 == devip->lun))
pq_pdt = 0x7f; /* not present, no device type */
else
pq_pdt = (scsi_debug_ptype & 0x1f);
arr[0] = pq_pdt;
if (0x2 & cmd[1]) { /* CMDDT bit set */
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
0);
kfree(arr);
return check_condition_result;
} else if (0x1 & cmd[1]) { /* EVPD bit set */
int lu_id_num, port_group_id, target_dev_id, len;
char lu_id_str[6];
int host_no = devip->sdbg_host->shost->host_no;
port_group_id = (((host_no + 1) & 0x7f) << 8) +
(devip->channel & 0x7f);
if (0 == scsi_debug_vpd_use_hostno)
host_no = 0;
lu_id_num = devip->wlun ? -1 : (((host_no + 1) * 2000) +
(devip->target * 1000) + devip->lun);
target_dev_id = ((host_no + 1) * 2000) +
(devip->target * 1000) - 3;
len = scnprintf(lu_id_str, 6, "%d", lu_id_num);
if (0 == cmd[2]) { /* supported vital product data pages */
arr[1] = cmd[2]; /*sanity */
n = 4;
arr[n++] = 0x0; /* this page */
arr[n++] = 0x80; /* unit serial number */
arr[n++] = 0x83; /* device identification */
arr[n++] = 0x84; /* software interface ident. */
arr[n++] = 0x85; /* management network addresses */
arr[n++] = 0x86; /* extended inquiry */
arr[n++] = 0x87; /* mode page policy */
arr[n++] = 0x88; /* SCSI ports */
arr[n++] = 0x89; /* ATA information */
arr[n++] = 0xb0; /* Block limits (SBC) */
arr[n++] = 0xb1; /* Block characteristics (SBC) */
arr[n++] = 0xb2; /* Thin provisioning (SBC) */
arr[3] = n - 4; /* number of supported VPD pages */
} else if (0x80 == cmd[2]) { /* unit serial number */
arr[1] = cmd[2]; /*sanity */
arr[3] = len;
memcpy(&arr[4], lu_id_str, len);
} else if (0x83 == cmd[2]) { /* device identification */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_83(&arr[4], port_group_id,
target_dev_id, lu_id_num,
lu_id_str, len);
} else if (0x84 == cmd[2]) { /* Software interface ident. */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_84(&arr[4]);
} else if (0x85 == cmd[2]) { /* Management network addresses */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_85(&arr[4]);
} else if (0x86 == cmd[2]) { /* extended inquiry */
arr[1] = cmd[2]; /*sanity */
arr[3] = 0x3c; /* number of following entries */
if (scsi_debug_dif == SD_DIF_TYPE3_PROTECTION)
arr[4] = 0x4; /* SPT: GRD_CHK:1 */
else if (scsi_debug_dif)
arr[4] = 0x5; /* SPT: GRD_CHK:1, REF_CHK:1 */
else
arr[4] = 0x0; /* no protection stuff */
arr[5] = 0x7; /* head of q, ordered + simple q's */
} else if (0x87 == cmd[2]) { /* mode page policy */
arr[1] = cmd[2]; /*sanity */
arr[3] = 0x8; /* number of following entries */
arr[4] = 0x2; /* disconnect-reconnect mp */
arr[6] = 0x80; /* mlus, shared */
arr[8] = 0x18; /* protocol specific lu */
arr[10] = 0x82; /* mlus, per initiator port */
} else if (0x88 == cmd[2]) { /* SCSI Ports */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_88(&arr[4], target_dev_id);
} else if (0x89 == cmd[2]) { /* ATA information */
arr[1] = cmd[2]; /*sanity */
n = inquiry_evpd_89(&arr[4]);
arr[2] = (n >> 8);
arr[3] = (n & 0xff);
} else if (0xb0 == cmd[2]) { /* Block limits (SBC) */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b0(&arr[4]);
} else if (0xb1 == cmd[2]) { /* Block characteristics (SBC) */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b1(&arr[4]);
} else if (0xb2 == cmd[2]) { /* Thin provisioning (SBC) */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b2(&arr[4]);
} else {
/* Illegal request, invalid field in cdb */
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
kfree(arr);
return check_condition_result;
}
len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
ret = fill_from_dev_buffer(scp, arr,
min(len, SDEBUG_MAX_INQ_ARR_SZ));
kfree(arr);
return ret;
}
/* drops through here for a standard inquiry */
arr[1] = DEV_REMOVEABLE(target) ? 0x80 : 0; /* Removable disk */
arr[2] = scsi_debug_scsi_level;
arr[3] = 2; /* response_data_format==2 */
arr[4] = SDEBUG_LONG_INQ_SZ - 5;
arr[5] = scsi_debug_dif ? 1 : 0; /* PROTECT bit */
if (0 == scsi_debug_vpd_use_hostno)
arr[5] = 0x10; /* claim: implicit TGPS */
arr[6] = 0x10; /* claim: MultiP */
/* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */
arr[7] = 0xa; /* claim: LINKED + CMDQUE */
memcpy(&arr[8], inq_vendor_id, 8);
memcpy(&arr[16], inq_product_id, 16);
memcpy(&arr[32], inq_product_rev, 4);
/* version descriptors (2 bytes each) follow */
arr[58] = 0x0; arr[59] = 0x77; /* SAM-3 ANSI */
arr[60] = 0x3; arr[61] = 0x14; /* SPC-3 ANSI */
n = 62;
if (scsi_debug_ptype == 0) {
arr[n++] = 0x3; arr[n++] = 0x3d; /* SBC-2 ANSI */
} else if (scsi_debug_ptype == 1) {
arr[n++] = 0x3; arr[n++] = 0x60; /* SSC-2 no version */
}
arr[n++] = 0xc; arr[n++] = 0xf; /* SAS-1.1 rev 10 */
ret = fill_from_dev_buffer(scp, arr,
min(alloc_len, SDEBUG_LONG_INQ_SZ));
kfree(arr);
return ret;
}
static int resp_requests(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char * sbuff;
unsigned char *cmd = (unsigned char *)scp->cmnd;
unsigned char arr[SDEBUG_SENSE_LEN];
int want_dsense;
int len = 18;
memset(arr, 0, sizeof(arr));
if (devip->reset == 1)
mk_sense_buffer(devip, 0, NO_ADDITIONAL_SENSE, 0);
want_dsense = !!(cmd[1] & 1) || scsi_debug_dsense;
sbuff = devip->sense_buff;
if ((iec_m_pg[2] & 0x4) && (6 == (iec_m_pg[3] & 0xf))) {
if (want_dsense) {
arr[0] = 0x72;
arr[1] = 0x0; /* NO_SENSE in sense_key */
arr[2] = THRESHOLD_EXCEEDED;
arr[3] = 0xff; /* TEST set and MRIE==6 */
} else {
arr[0] = 0x70;
arr[2] = 0x0; /* NO_SENSE in sense_key */
arr[7] = 0xa; /* 18 byte sense buffer */
arr[12] = THRESHOLD_EXCEEDED;
arr[13] = 0xff; /* TEST set and MRIE==6 */
}
} else {
memcpy(arr, sbuff, SDEBUG_SENSE_LEN);
if ((cmd[1] & 1) && (! scsi_debug_dsense)) {
/* DESC bit set and sense_buff in fixed format */
memset(arr, 0, sizeof(arr));
arr[0] = 0x72;
arr[1] = sbuff[2]; /* sense key */
arr[2] = sbuff[12]; /* asc */
arr[3] = sbuff[13]; /* ascq */
len = 8;
}
}
mk_sense_buffer(devip, 0, NO_ADDITIONAL_SENSE, 0);
return fill_from_dev_buffer(scp, arr, len);
}
static int resp_start_stop(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char *cmd = (unsigned char *)scp->cmnd;
int power_cond, errsts, start;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
power_cond = (cmd[4] & 0xf0) >> 4;
if (power_cond) {
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
0);
return check_condition_result;
}
start = cmd[4] & 1;
if (start == devip->stopped)
devip->stopped = !start;
return 0;
}
static sector_t get_sdebug_capacity(void)
{
if (scsi_debug_virtual_gb > 0)
return (sector_t)scsi_debug_virtual_gb *
(1073741824 / scsi_debug_sector_size);
else
return sdebug_store_sectors;
}
#define SDEBUG_READCAP_ARR_SZ 8
static int resp_readcap(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char arr[SDEBUG_READCAP_ARR_SZ];
unsigned int capac;
int errsts;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
/* following just in case virtual_gb changed */
sdebug_capacity = get_sdebug_capacity();
memset(arr, 0, SDEBUG_READCAP_ARR_SZ);
if (sdebug_capacity < 0xffffffff) {
capac = (unsigned int)sdebug_capacity - 1;
arr[0] = (capac >> 24);
arr[1] = (capac >> 16) & 0xff;
arr[2] = (capac >> 8) & 0xff;
arr[3] = capac & 0xff;
} else {
arr[0] = 0xff;
arr[1] = 0xff;
arr[2] = 0xff;
arr[3] = 0xff;
}
arr[6] = (scsi_debug_sector_size >> 8) & 0xff;
arr[7] = scsi_debug_sector_size & 0xff;
return fill_from_dev_buffer(scp, arr, SDEBUG_READCAP_ARR_SZ);
}
#define SDEBUG_READCAP16_ARR_SZ 32
static int resp_readcap16(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char *cmd = (unsigned char *)scp->cmnd;
unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
unsigned long long capac;
int errsts, k, alloc_len;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
alloc_len = ((cmd[10] << 24) + (cmd[11] << 16) + (cmd[12] << 8)
+ cmd[13]);
/* following just in case virtual_gb changed */
sdebug_capacity = get_sdebug_capacity();
memset(arr, 0, SDEBUG_READCAP16_ARR_SZ);
capac = sdebug_capacity - 1;
for (k = 0; k < 8; ++k, capac >>= 8)
arr[7 - k] = capac & 0xff;
arr[8] = (scsi_debug_sector_size >> 24) & 0xff;
arr[9] = (scsi_debug_sector_size >> 16) & 0xff;
arr[10] = (scsi_debug_sector_size >> 8) & 0xff;
arr[11] = scsi_debug_sector_size & 0xff;
arr[13] = scsi_debug_physblk_exp & 0xf;
arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (scsi_debug_tpu || scsi_debug_tpws)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
arr[14] |= 0x80; /* TPE */
arr[15] = scsi_debug_lowest_aligned & 0xff;
if (scsi_debug_dif) {
arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */
arr[12] |= 1; /* PROT_EN */
}
return fill_from_dev_buffer(scp, arr,
min(alloc_len, SDEBUG_READCAP16_ARR_SZ));
}
#define SDEBUG_MAX_TGTPGS_ARR_SZ 1412
static int resp_report_tgtpgs(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char *cmd = (unsigned char *)scp->cmnd;
unsigned char * arr;
int host_no = devip->sdbg_host->shost->host_no;
int n, ret, alen, rlen;
int port_group_a, port_group_b, port_a, port_b;
alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
+ cmd[9]);
arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
if (! arr)
return DID_REQUEUE << 16;
/*
* EVPD page 0x88 states we have two ports, one
* real and a fake port with no device connected.
* So we create two port groups with one port each
* and set the group with port B to unavailable.
*/
port_a = 0x1; /* relative port A */
port_b = 0x2; /* relative port B */
port_group_a = (((host_no + 1) & 0x7f) << 8) +
(devip->channel & 0x7f);
port_group_b = (((host_no + 1) & 0x7f) << 8) +
(devip->channel & 0x7f) + 0x80;
/*
* The asymmetric access state is cycled according to the host_id.
*/
n = 4;
if (0 == scsi_debug_vpd_use_hostno) {
arr[n++] = host_no % 3; /* Asymm access state */
arr[n++] = 0x0F; /* claim: all states are supported */
} else {
arr[n++] = 0x0; /* Active/Optimized path */
arr[n++] = 0x01; /* claim: only support active/optimized paths */
}
arr[n++] = (port_group_a >> 8) & 0xff;
arr[n++] = port_group_a & 0xff;
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Status code */
arr[n++] = 0; /* Vendor unique */
arr[n++] = 0x1; /* One port per group */
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Reserved */
arr[n++] = (port_a >> 8) & 0xff;
arr[n++] = port_a & 0xff;
arr[n++] = 3; /* Port unavailable */
arr[n++] = 0x08; /* claim: only unavailalbe paths are supported */
arr[n++] = (port_group_b >> 8) & 0xff;
arr[n++] = port_group_b & 0xff;
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Status code */
arr[n++] = 0; /* Vendor unique */
arr[n++] = 0x1; /* One port per group */
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Reserved */
arr[n++] = (port_b >> 8) & 0xff;
arr[n++] = port_b & 0xff;
rlen = n - 4;
arr[0] = (rlen >> 24) & 0xff;
arr[1] = (rlen >> 16) & 0xff;
arr[2] = (rlen >> 8) & 0xff;
arr[3] = rlen & 0xff;
/*
* Return the smallest value of either
* - The allocated length
* - The constructed command length
* - The maximum array size
*/
rlen = min(alen,n);
ret = fill_from_dev_buffer(scp, arr,
min(rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
kfree(arr);
return ret;
}
/* <<Following mode page info copied from ST318451LW>> */
static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target)
{ /* Read-Write Error Recovery page for mode_sense */
unsigned char err_recov_pg[] = {0x1, 0xa, 0xc0, 11, 240, 0, 0, 0,
5, 0, 0xff, 0xff};
memcpy(p, err_recov_pg, sizeof(err_recov_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(err_recov_pg) - 2);
return sizeof(err_recov_pg);
}
static int resp_disconnect_pg(unsigned char * p, int pcontrol, int target)
{ /* Disconnect-Reconnect page for mode_sense */
unsigned char disconnect_pg[] = {0x2, 0xe, 128, 128, 0, 10, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0};
memcpy(p, disconnect_pg, sizeof(disconnect_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(disconnect_pg) - 2);
return sizeof(disconnect_pg);
}
static int resp_format_pg(unsigned char * p, int pcontrol, int target)
{ /* Format device page for mode_sense */
unsigned char format_pg[] = {0x3, 0x16, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0x40, 0, 0, 0};
memcpy(p, format_pg, sizeof(format_pg));
p[10] = (sdebug_sectors_per >> 8) & 0xff;
p[11] = sdebug_sectors_per & 0xff;
p[12] = (scsi_debug_sector_size >> 8) & 0xff;
p[13] = scsi_debug_sector_size & 0xff;
if (DEV_REMOVEABLE(target))
p[20] |= 0x20; /* should agree with INQUIRY */
if (1 == pcontrol)
memset(p + 2, 0, sizeof(format_pg) - 2);
return sizeof(format_pg);
}
static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
{ /* Caching page for mode_sense */
unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0, 0, 0, 0, 0};
memcpy(p, caching_pg, sizeof(caching_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(caching_pg) - 2);
return sizeof(caching_pg);
}
static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
{ /* Control mode page for mode_sense */
unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0,
0, 0, 0, 0};
unsigned char d_ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
0, 0, 0x2, 0x4b};
if (scsi_debug_dsense)
ctrl_m_pg[2] |= 0x4;
else
ctrl_m_pg[2] &= ~0x4;
if (scsi_debug_ato)
ctrl_m_pg[5] |= 0x80; /* ATO=1 */
memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg));
if (1 == pcontrol)
memcpy(p + 2, ch_ctrl_m_pg, sizeof(ch_ctrl_m_pg));
else if (2 == pcontrol)
memcpy(p, d_ctrl_m_pg, sizeof(d_ctrl_m_pg));
return sizeof(ctrl_m_pg);
}
static int resp_iec_m_pg(unsigned char * p, int pcontrol, int target)
{ /* Informational Exceptions control mode page for mode_sense */
unsigned char ch_iec_m_pg[] = {/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
unsigned char d_iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
memcpy(p, iec_m_pg, sizeof(iec_m_pg));
if (1 == pcontrol)
memcpy(p + 2, ch_iec_m_pg, sizeof(ch_iec_m_pg));
else if (2 == pcontrol)
memcpy(p, d_iec_m_pg, sizeof(d_iec_m_pg));
return sizeof(iec_m_pg);
}
static int resp_sas_sf_m_pg(unsigned char * p, int pcontrol, int target)
{ /* SAS SSP mode page - short format for mode_sense */
unsigned char sas_sf_m_pg[] = {0x19, 0x6,
0x6, 0x0, 0x7, 0xd0, 0x0, 0x0};
memcpy(p, sas_sf_m_pg, sizeof(sas_sf_m_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(sas_sf_m_pg) - 2);
return sizeof(sas_sf_m_pg);
}
static int resp_sas_pcd_m_spg(unsigned char * p, int pcontrol, int target,
int target_dev_id)
{ /* SAS phy control and discover mode page for mode_sense */
unsigned char sas_pcd_m_pg[] = {0x59, 0x1, 0, 0x64, 0, 0x6, 0, 2,
0, 0, 0, 0, 0x10, 0x9, 0x8, 0x0,
0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0,
0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1,
0x2, 0, 0, 0, 0, 0, 0, 0,
0x88, 0x99, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0x10, 0x9, 0x8, 0x0,
0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0,
0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1,
0x3, 0, 0, 0, 0, 0, 0, 0,
0x88, 0x99, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
};
int port_a, port_b;
port_a = target_dev_id + 1;
port_b = port_a + 1;
memcpy(p, sas_pcd_m_pg, sizeof(sas_pcd_m_pg));
p[20] = (port_a >> 24);
p[21] = (port_a >> 16) & 0xff;
p[22] = (port_a >> 8) & 0xff;
p[23] = port_a & 0xff;
p[48 + 20] = (port_b >> 24);
p[48 + 21] = (port_b >> 16) & 0xff;
p[48 + 22] = (port_b >> 8) & 0xff;
p[48 + 23] = port_b & 0xff;
if (1 == pcontrol)
memset(p + 4, 0, sizeof(sas_pcd_m_pg) - 4);
return sizeof(sas_pcd_m_pg);
}
static int resp_sas_sha_m_spg(unsigned char * p, int pcontrol)
{ /* SAS SSP shared protocol specific port mode subpage */
unsigned char sas_sha_m_pg[] = {0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0,
0, 0, 0, 0, 0, 0, 0, 0,
};
memcpy(p, sas_sha_m_pg, sizeof(sas_sha_m_pg));
if (1 == pcontrol)
memset(p + 4, 0, sizeof(sas_sha_m_pg) - 4);
return sizeof(sas_sha_m_pg);
}
#define SDEBUG_MAX_MSENSE_SZ 256
static int resp_mode_sense(struct scsi_cmnd * scp, int target,
struct sdebug_dev_info * devip)
{
unsigned char dbd, llbaa;
int pcontrol, pcode, subpcode, bd_len;
unsigned char dev_spec;
int k, alloc_len, msense_6, offset, len, errsts, target_dev_id;
unsigned char * ap;
unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
unsigned char *cmd = (unsigned char *)scp->cmnd;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
dbd = !!(cmd[1] & 0x8);
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
subpcode = cmd[3];
msense_6 = (MODE_SENSE == cmd[0]);
llbaa = msense_6 ? 0 : !!(cmd[1] & 0x10);
if ((0 == scsi_debug_ptype) && (0 == dbd))
bd_len = llbaa ? 16 : 8;
else
bd_len = 0;
alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[8]);
memset(arr, 0, SDEBUG_MAX_MSENSE_SZ);
if (0x3 == pcontrol) { /* Saving values not supported */
mk_sense_buffer(devip, ILLEGAL_REQUEST, SAVING_PARAMS_UNSUP,
0);
return check_condition_result;
}
target_dev_id = ((devip->sdbg_host->shost->host_no + 1) * 2000) +
(devip->target * 1000) - 3;
/* set DPOFUA bit for disks */
if (0 == scsi_debug_ptype)
dev_spec = (DEV_READONLY(target) ? 0x80 : 0x0) | 0x10;
else
dev_spec = 0x0;
if (msense_6) {
arr[2] = dev_spec;
arr[3] = bd_len;
offset = 4;
} else {
arr[3] = dev_spec;
if (16 == bd_len)
arr[4] = 0x1; /* set LONGLBA bit */
arr[7] = bd_len; /* assume 255 or less */
offset = 8;
}
ap = arr + offset;
if ((bd_len > 0) && (!sdebug_capacity))
sdebug_capacity = get_sdebug_capacity();
if (8 == bd_len) {
if (sdebug_capacity > 0xfffffffe) {
ap[0] = 0xff;
ap[1] = 0xff;
ap[2] = 0xff;
ap[3] = 0xff;
} else {
ap[0] = (sdebug_capacity >> 24) & 0xff;
ap[1] = (sdebug_capacity >> 16) & 0xff;
ap[2] = (sdebug_capacity >> 8) & 0xff;
ap[3] = sdebug_capacity & 0xff;
}
ap[6] = (scsi_debug_sector_size >> 8) & 0xff;
ap[7] = scsi_debug_sector_size & 0xff;
offset += bd_len;
ap = arr + offset;
} else if (16 == bd_len) {
unsigned long long capac = sdebug_capacity;
for (k = 0; k < 8; ++k, capac >>= 8)
ap[7 - k] = capac & 0xff;
ap[12] = (scsi_debug_sector_size >> 24) & 0xff;
ap[13] = (scsi_debug_sector_size >> 16) & 0xff;
ap[14] = (scsi_debug_sector_size >> 8) & 0xff;
ap[15] = scsi_debug_sector_size & 0xff;
offset += bd_len;
ap = arr + offset;
}
if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
/* TODO: Control Extension page */
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
0);
return check_condition_result;
}
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
len = resp_err_recov_pg(ap, pcontrol, target);
offset += len;
break;
case 0x2: /* Disconnect-Reconnect page, all devices */
len = resp_disconnect_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3: /* Format device page, direct access */
len = resp_format_pg(ap, pcontrol, target);
offset += len;
break;
case 0x8: /* Caching page, direct access */
len = resp_caching_pg(ap, pcontrol, target);
offset += len;
break;
case 0xa: /* Control Mode page, all devices */
len = resp_ctrl_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
if ((subpcode > 0x2) && (subpcode < 0xff)) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
len = 0;
if ((0x0 == subpcode) || (0xff == subpcode))
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
if ((0x1 == subpcode) || (0xff == subpcode))
len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
target_dev_id);
if ((0x2 == subpcode) || (0xff == subpcode))
len += resp_sas_sha_m_spg(ap + len, pcontrol);
offset += len;
break;
case 0x1c: /* Informational Exceptions Mode page, all devices */
len = resp_iec_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3f: /* Read all Mode pages */
if ((0 == subpcode) || (0xff == subpcode)) {
len = resp_err_recov_pg(ap, pcontrol, target);
len += resp_disconnect_pg(ap + len, pcontrol, target);
len += resp_format_pg(ap + len, pcontrol, target);
len += resp_caching_pg(ap + len, pcontrol, target);
len += resp_ctrl_m_pg(ap + len, pcontrol, target);
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
if (0xff == subpcode) {
len += resp_sas_pcd_m_spg(ap + len, pcontrol,
target, target_dev_id);
len += resp_sas_sha_m_spg(ap + len, pcontrol);
}
len += resp_iec_m_pg(ap + len, pcontrol, target);
} else {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
offset += len;
break;
default:
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
0);
return check_condition_result;
}
if (msense_6)
arr[0] = offset - 1;
else {
arr[0] = ((offset - 2) >> 8) & 0xff;
arr[1] = (offset - 2) & 0xff;
}
return fill_from_dev_buffer(scp, arr, min(alloc_len, offset));
}
#define SDEBUG_MAX_MSELECT_SZ 512
static int resp_mode_select(struct scsi_cmnd * scp, int mselect6,
struct sdebug_dev_info * devip)
{
int pf, sp, ps, md_len, bd_len, off, spf, pg_len;
int param_len, res, errsts, mpage;
unsigned char arr[SDEBUG_MAX_MSELECT_SZ];
unsigned char *cmd = (unsigned char *)scp->cmnd;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
memset(arr, 0, sizeof(arr));
pf = cmd[1] & 0x10;
sp = cmd[1] & 0x1;
param_len = mselect6 ? cmd[4] : ((cmd[7] << 8) + cmd[8]);
if ((0 == pf) || sp || (param_len > SDEBUG_MAX_MSELECT_SZ)) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
res = fetch_to_dev_buffer(scp, arr, param_len);
if (-1 == res)
return (DID_ERROR << 16);
else if ((res < param_len) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
printk(KERN_INFO "scsi_debug: mode_select: cdb indicated=%d, "
" IO sent=%d bytes\n", param_len, res);
md_len = mselect6 ? (arr[0] + 1) : ((arr[0] << 8) + arr[1] + 2);
bd_len = mselect6 ? arr[3] : ((arr[6] << 8) + arr[7]);
if (md_len > 2) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_PARAM_LIST, 0);
return check_condition_result;
}
off = bd_len + (mselect6 ? 4 : 8);
mpage = arr[off] & 0x3f;
ps = !!(arr[off] & 0x80);
if (ps) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_PARAM_LIST, 0);
return check_condition_result;
}
spf = !!(arr[off] & 0x40);
pg_len = spf ? ((arr[off + 2] << 8) + arr[off + 3] + 4) :
(arr[off + 1] + 2);
if ((pg_len + off) > param_len) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
PARAMETER_LIST_LENGTH_ERR, 0);
return check_condition_result;
}
switch (mpage) {
case 0xa: /* Control Mode page */
if (ctrl_m_pg[1] == arr[off + 1]) {
memcpy(ctrl_m_pg + 2, arr + off + 2,
sizeof(ctrl_m_pg) - 2);
scsi_debug_dsense = !!(ctrl_m_pg[2] & 0x4);
return 0;
}
break;
case 0x1c: /* Informational Exceptions Mode page */
if (iec_m_pg[1] == arr[off + 1]) {
memcpy(iec_m_pg + 2, arr + off + 2,
sizeof(iec_m_pg) - 2);
return 0;
}
break;
default:
break;
}
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_PARAM_LIST, 0);
return check_condition_result;
}
static int resp_temp_l_pg(unsigned char * arr)
{
unsigned char temp_l_pg[] = {0x0, 0x0, 0x3, 0x2, 0x0, 38,
0x0, 0x1, 0x3, 0x2, 0x0, 65,
};
memcpy(arr, temp_l_pg, sizeof(temp_l_pg));
return sizeof(temp_l_pg);
}
static int resp_ie_l_pg(unsigned char * arr)
{
unsigned char ie_l_pg[] = {0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38,
};
memcpy(arr, ie_l_pg, sizeof(ie_l_pg));
if (iec_m_pg[2] & 0x4) { /* TEST bit set */
arr[4] = THRESHOLD_EXCEEDED;
arr[5] = 0xff;
}
return sizeof(ie_l_pg);
}
#define SDEBUG_MAX_LSENSE_SZ 512
static int resp_log_sense(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
int ppc, sp, pcontrol, pcode, subpcode, alloc_len, errsts, len, n;
unsigned char arr[SDEBUG_MAX_LSENSE_SZ];
unsigned char *cmd = (unsigned char *)scp->cmnd;
if ((errsts = check_readiness(scp, 1, devip)))
return errsts;
memset(arr, 0, sizeof(arr));
ppc = cmd[1] & 0x2;
sp = cmd[1] & 0x1;
if (ppc || sp) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
subpcode = cmd[3] & 0xff;
alloc_len = (cmd[7] << 8) + cmd[8];
arr[0] = pcode;
if (0 == subpcode) {
switch (pcode) {
case 0x0: /* Supported log pages log page */
n = 4;
arr[n++] = 0x0; /* this page */
arr[n++] = 0xd; /* Temperature */
arr[n++] = 0x2f; /* Informational exceptions */
arr[3] = n - 4;
break;
case 0xd: /* Temperature log page */
arr[3] = resp_temp_l_pg(arr + 4);
break;
case 0x2f: /* Informational exceptions log page */
arr[3] = resp_ie_l_pg(arr + 4);
break;
default:
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
} else if (0xff == subpcode) {
arr[0] |= 0x40;
arr[1] = subpcode;
switch (pcode) {
case 0x0: /* Supported log pages and subpages log page */
n = 4;
arr[n++] = 0x0;
arr[n++] = 0x0; /* 0,0 page */
arr[n++] = 0x0;
arr[n++] = 0xff; /* this page */
arr[n++] = 0xd;
arr[n++] = 0x0; /* Temperature */
arr[n++] = 0x2f;
arr[n++] = 0x0; /* Informational exceptions */
arr[3] = n - 4;
break;
case 0xd: /* Temperature subpages */
n = 4;
arr[n++] = 0xd;
arr[n++] = 0x0; /* Temperature */
arr[3] = n - 4;
break;
case 0x2f: /* Informational exceptions subpages */
n = 4;
arr[n++] = 0x2f;
arr[n++] = 0x0; /* Informational exceptions */
arr[3] = n - 4;
break;
default:
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
} else {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
return fill_from_dev_buffer(scp, arr,
min(len, SDEBUG_MAX_INQ_ARR_SZ));
}
static int check_device_access_params(struct sdebug_dev_info *devi,
unsigned long long lba, unsigned int num)
{
if (lba + num > sdebug_capacity) {
mk_sense_buffer(devi, ILLEGAL_REQUEST, ADDR_OUT_OF_RANGE, 0);
return check_condition_result;
}
/* transfer length excessive (tie in to block limits VPD page) */
if (num > sdebug_store_sectors) {
mk_sense_buffer(devi, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
return 0;
}
static int do_device_access(struct scsi_cmnd *scmd,
struct sdebug_dev_info *devi,
unsigned long long lba, unsigned int num, int write)
{
int ret;
unsigned int block, rest = 0;
int (*func)(struct scsi_cmnd *, unsigned char *, int);
func = write ? fetch_to_dev_buffer : fill_from_dev_buffer;
block = do_div(lba, sdebug_store_sectors);
if (block + num > sdebug_store_sectors)
rest = block + num - sdebug_store_sectors;
ret = func(scmd, fake_storep + (block * scsi_debug_sector_size),
(num - rest) * scsi_debug_sector_size);
if (!ret && rest)
ret = func(scmd, fake_storep, rest * scsi_debug_sector_size);
return ret;
}
static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
unsigned int sectors, u32 ei_lba)
{
unsigned int i, resid;
struct scatterlist *psgl;
struct sd_dif_tuple *sdt;
sector_t sector;
sector_t tmp_sec = start_sec;
void *paddr;
start_sec = do_div(tmp_sec, sdebug_store_sectors);
sdt = (struct sd_dif_tuple *)(dif_storep + dif_offset(start_sec));
for (i = 0 ; i < sectors ; i++) {
u16 csum;
if (sdt[i].app_tag == 0xffff)
continue;
sector = start_sec + i;
switch (scsi_debug_guard) {
case 1:
csum = ip_compute_csum(fake_storep +
sector * scsi_debug_sector_size,
scsi_debug_sector_size);
break;
case 0:
csum = crc_t10dif(fake_storep +
sector * scsi_debug_sector_size,
scsi_debug_sector_size);
csum = cpu_to_be16(csum);
break;
default:
BUG();
}
if (sdt[i].guard_tag != csum) {
printk(KERN_ERR "%s: GUARD check failed on sector %lu" \
" rcvd 0x%04x, data 0x%04x\n", __func__,
(unsigned long)sector,
be16_to_cpu(sdt[i].guard_tag),
be16_to_cpu(csum));
dif_errors++;
return 0x01;
}
if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
be32_to_cpu(sdt[i].ref_tag) != (sector & 0xffffffff)) {
printk(KERN_ERR "%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
dif_errors++;
return 0x03;
}
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
be32_to_cpu(sdt[i].ref_tag) != ei_lba) {
printk(KERN_ERR "%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
dif_errors++;
return 0x03;
}
ei_lba++;
}
resid = sectors * 8; /* Bytes of protection data to copy into sgl */
sector = start_sec;
scsi_for_each_prot_sg(SCpnt, psgl, scsi_prot_sg_count(SCpnt), i) {
int len = min(psgl->length, resid);
paddr = kmap_atomic(sg_page(psgl), KM_IRQ0) + psgl->offset;
memcpy(paddr, dif_storep + dif_offset(sector), len);
sector += len >> 3;
if (sector >= sdebug_store_sectors) {
/* Force wrap */
tmp_sec = sector;
sector = do_div(tmp_sec, sdebug_store_sectors);
}
resid -= len;
kunmap_atomic(paddr, KM_IRQ0);
}
dix_reads++;
return 0;
}
static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba,
unsigned int num, struct sdebug_dev_info *devip,
u32 ei_lba)
{
unsigned long iflags;
int ret;
ret = check_device_access_params(devip, lba, num);
if (ret)
return ret;
if ((SCSI_DEBUG_OPT_MEDIUM_ERR & scsi_debug_opts) &&
(lba <= OPT_MEDIUM_ERR_ADDR) &&
((lba + num) > OPT_MEDIUM_ERR_ADDR)) {
/* claim unrecoverable read error */
mk_sense_buffer(devip, MEDIUM_ERROR, UNRECOVERED_READ_ERR,
0);
/* set info field and valid bit for fixed descriptor */
if (0x70 == (devip->sense_buff[0] & 0x7f)) {
devip->sense_buff[0] |= 0x80; /* Valid bit */
ret = OPT_MEDIUM_ERR_ADDR;
devip->sense_buff[3] = (ret >> 24) & 0xff;
devip->sense_buff[4] = (ret >> 16) & 0xff;
devip->sense_buff[5] = (ret >> 8) & 0xff;
devip->sense_buff[6] = ret & 0xff;
}
return check_condition_result;
}
/* DIX + T10 DIF */
if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
int prot_ret = prot_verify_read(SCpnt, lba, num, ei_lba);
if (prot_ret) {
mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, prot_ret);
return illegal_condition_result;
}
}
read_lock_irqsave(&atomic_rw, iflags);
ret = do_device_access(SCpnt, devip, lba, num, 0);
read_unlock_irqrestore(&atomic_rw, iflags);
return ret;
}
void dump_sector(unsigned char *buf, int len)
{
int i, j;
printk(KERN_ERR ">>> Sector Dump <<<\n");
for (i = 0 ; i < len ; i += 16) {
printk(KERN_ERR "%04d: ", i);
for (j = 0 ; j < 16 ; j++) {
unsigned char c = buf[i+j];
if (c >= 0x20 && c < 0x7e)
printk(" %c ", buf[i+j]);
else
printk("%02x ", buf[i+j]);
}
printk("\n");
}
}
static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
unsigned int sectors, u32 ei_lba)
{
int i, j, ret;
struct sd_dif_tuple *sdt;
struct scatterlist *dsgl = scsi_sglist(SCpnt);
struct scatterlist *psgl = scsi_prot_sglist(SCpnt);
void *daddr, *paddr;
sector_t tmp_sec = start_sec;
sector_t sector;
int ppage_offset;
unsigned short csum;
sector = do_div(tmp_sec, sdebug_store_sectors);
BUG_ON(scsi_sg_count(SCpnt) == 0);
BUG_ON(scsi_prot_sg_count(SCpnt) == 0);
paddr = kmap_atomic(sg_page(psgl), KM_IRQ1) + psgl->offset;
ppage_offset = 0;
/* For each data page */
scsi_for_each_sg(SCpnt, dsgl, scsi_sg_count(SCpnt), i) {
daddr = kmap_atomic(sg_page(dsgl), KM_IRQ0) + dsgl->offset;
/* For each sector-sized chunk in data page */
for (j = 0 ; j < dsgl->length ; j += scsi_debug_sector_size) {
/* If we're at the end of the current
* protection page advance to the next one
*/
if (ppage_offset >= psgl->length) {
kunmap_atomic(paddr, KM_IRQ1);
psgl = sg_next(psgl);
BUG_ON(psgl == NULL);
paddr = kmap_atomic(sg_page(psgl), KM_IRQ1)
+ psgl->offset;
ppage_offset = 0;
}
sdt = paddr + ppage_offset;
switch (scsi_debug_guard) {
case 1:
csum = ip_compute_csum(daddr,
scsi_debug_sector_size);
break;
case 0:
csum = cpu_to_be16(crc_t10dif(daddr,
scsi_debug_sector_size));
break;
default:
BUG();
ret = 0;
goto out;
}
if (sdt->guard_tag != csum) {
printk(KERN_ERR
"%s: GUARD check failed on sector %lu " \
"rcvd 0x%04x, calculated 0x%04x\n",
__func__, (unsigned long)sector,
be16_to_cpu(sdt->guard_tag),
be16_to_cpu(csum));
ret = 0x01;
dump_sector(daddr, scsi_debug_sector_size);
goto out;
}
if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
be32_to_cpu(sdt->ref_tag)
!= (start_sec & 0xffffffff)) {
printk(KERN_ERR
"%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
ret = 0x03;
dump_sector(daddr, scsi_debug_sector_size);
goto out;
}
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
be32_to_cpu(sdt->ref_tag) != ei_lba) {
printk(KERN_ERR
"%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
ret = 0x03;
dump_sector(daddr, scsi_debug_sector_size);
goto out;
}
/* Would be great to copy this in bigger
* chunks. However, for the sake of
* correctness we need to verify each sector
* before writing it to "stable" storage
*/
memcpy(dif_storep + dif_offset(sector), sdt, 8);
sector++;
if (sector == sdebug_store_sectors)
sector = 0; /* Force wrap */
start_sec++;
ei_lba++;
daddr += scsi_debug_sector_size;
ppage_offset += sizeof(struct sd_dif_tuple);
}
kunmap_atomic(daddr, KM_IRQ0);
}
kunmap_atomic(paddr, KM_IRQ1);
dix_writes++;
return 0;
out:
dif_errors++;
kunmap_atomic(daddr, KM_IRQ0);
kunmap_atomic(paddr, KM_IRQ1);
return ret;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static unsigned int map_state(sector_t lba, unsigned int *num)
{
unsigned int granularity, alignment, mapped;
sector_t block, next, end;
granularity = scsi_debug_unmap_granularity;
alignment = granularity - scsi_debug_unmap_alignment;
block = lba + alignment;
do_div(block, granularity);
mapped = test_bit(block, map_storep);
if (mapped)
next = find_next_zero_bit(map_storep, map_size, block);
else
next = find_next_bit(map_storep, map_size, block);
end = next * granularity - scsi_debug_unmap_alignment;
*num = end - lba;
return mapped;
}
static void map_region(sector_t lba, unsigned int len)
{
unsigned int granularity, alignment;
sector_t end = lba + len;
granularity = scsi_debug_unmap_granularity;
alignment = granularity - scsi_debug_unmap_alignment;
while (lba < end) {
sector_t block, rem;
block = lba + alignment;
rem = do_div(block, granularity);
if (block < map_size)
set_bit(block, map_storep);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
lba += granularity - rem;
}
}
static void unmap_region(sector_t lba, unsigned int len)
{
unsigned int granularity, alignment;
sector_t end = lba + len;
granularity = scsi_debug_unmap_granularity;
alignment = granularity - scsi_debug_unmap_alignment;
while (lba < end) {
sector_t block, rem;
block = lba + alignment;
rem = do_div(block, granularity);
if (rem == 0 && lba + granularity <= end &&
block < map_size)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
clear_bit(block, map_storep);
lba += granularity - rem;
}
}
static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba,
unsigned int num, struct sdebug_dev_info *devip,
u32 ei_lba)
{
unsigned long iflags;
int ret;
ret = check_device_access_params(devip, lba, num);
if (ret)
return ret;
/* DIX + T10 DIF */
if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
int prot_ret = prot_verify_write(SCpnt, lba, num, ei_lba);
if (prot_ret) {
mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, prot_ret);
return illegal_condition_result;
}
}
write_lock_irqsave(&atomic_rw, iflags);
ret = do_device_access(SCpnt, devip, lba, num, 1);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (scsi_debug_unmap_granularity)
map_region(lba, num);
write_unlock_irqrestore(&atomic_rw, iflags);
if (-1 == ret)
return (DID_ERROR << 16);
else if ((ret < (num * scsi_debug_sector_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
printk(KERN_INFO "scsi_debug: write: cdb indicated=%u, "
" IO sent=%d bytes\n", num * scsi_debug_sector_size, ret);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return 0;
}
static int resp_write_same(struct scsi_cmnd *scmd, unsigned long long lba,
unsigned int num, struct sdebug_dev_info *devip,
u32 ei_lba, unsigned int unmap)
{
unsigned long iflags;
unsigned long long i;
int ret;
ret = check_device_access_params(devip, lba, num);
if (ret)
return ret;
write_lock_irqsave(&atomic_rw, iflags);
if (unmap && scsi_debug_unmap_granularity) {
unmap_region(lba, num);
goto out;
}
/* Else fetch one logical block */
ret = fetch_to_dev_buffer(scmd,
fake_storep + (lba * scsi_debug_sector_size),
scsi_debug_sector_size);
if (-1 == ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
return (DID_ERROR << 16);
} else if ((ret < (num * scsi_debug_sector_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
printk(KERN_INFO "scsi_debug: write same: cdb indicated=%u, "
" IO sent=%d bytes\n", num * scsi_debug_sector_size, ret);
/* Copy first sector to remaining blocks */
for (i = 1 ; i < num ; i++)
memcpy(fake_storep + ((lba + i) * scsi_debug_sector_size),
fake_storep + (lba * scsi_debug_sector_size),
scsi_debug_sector_size);
if (scsi_debug_unmap_granularity)
map_region(lba, num);
out:
write_unlock_irqrestore(&atomic_rw, iflags);
return 0;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
struct unmap_block_desc {
__be64 lba;
__be32 blocks;
__be32 __reserved;
};
static int resp_unmap(struct scsi_cmnd * scmd, struct sdebug_dev_info * devip)
{
unsigned char *buf;
struct unmap_block_desc *desc;
unsigned int i, payload_len, descriptors;
int ret;
ret = check_readiness(scmd, 1, devip);
if (ret)
return ret;
payload_len = get_unaligned_be16(&scmd->cmnd[7]);
BUG_ON(scsi_bufflen(scmd) != payload_len);
descriptors = (payload_len - 8) / 16;
buf = kmalloc(scsi_bufflen(scmd), GFP_ATOMIC);
if (!buf)
return check_condition_result;
scsi_sg_copy_to_buffer(scmd, buf, scsi_bufflen(scmd));
BUG_ON(get_unaligned_be16(&buf[0]) != payload_len - 2);
BUG_ON(get_unaligned_be16(&buf[2]) != descriptors * 16);
desc = (void *)&buf[8];
for (i = 0 ; i < descriptors ; i++) {
unsigned long long lba = get_unaligned_be64(&desc[i].lba);
unsigned int num = get_unaligned_be32(&desc[i].blocks);
ret = check_device_access_params(devip, lba, num);
if (ret)
goto out;
unmap_region(lba, num);
}
ret = 0;
out:
kfree(buf);
return ret;
}
#define SDEBUG_GET_LBA_STATUS_LEN 32
static int resp_get_lba_status(struct scsi_cmnd * scmd,
struct sdebug_dev_info * devip)
{
unsigned long long lba;
unsigned int alloc_len, mapped, num;
unsigned char arr[SDEBUG_GET_LBA_STATUS_LEN];
int ret;
ret = check_readiness(scmd, 1, devip);
if (ret)
return ret;
lba = get_unaligned_be64(&scmd->cmnd[2]);
alloc_len = get_unaligned_be32(&scmd->cmnd[10]);
if (alloc_len < 24)
return 0;
ret = check_device_access_params(devip, lba, 1);
if (ret)
return ret;
mapped = map_state(lba, &num);
memset(arr, 0, SDEBUG_GET_LBA_STATUS_LEN);
put_unaligned_be32(16, &arr[0]); /* Parameter Data Length */
put_unaligned_be64(lba, &arr[8]); /* LBA */
put_unaligned_be32(num, &arr[16]); /* Number of blocks */
arr[20] = !mapped; /* mapped = 0, unmapped = 1 */
return fill_from_dev_buffer(scmd, arr, SDEBUG_GET_LBA_STATUS_LEN);
}
#define SDEBUG_RLUN_ARR_SZ 256
static int resp_report_luns(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned int alloc_len;
int lun_cnt, i, upper, num, n, wlun, lun;
unsigned char *cmd = (unsigned char *)scp->cmnd;
int select_report = (int)cmd[2];
struct scsi_lun *one_lun;
unsigned char arr[SDEBUG_RLUN_ARR_SZ];
unsigned char * max_addr;
alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
if ((alloc_len < 4) || (select_report > 2)) {
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
0);
return check_condition_result;
}
/* can produce response with up to 16k luns (lun 0 to lun 16383) */
memset(arr, 0, SDEBUG_RLUN_ARR_SZ);
lun_cnt = scsi_debug_max_luns;
if (1 == select_report)
lun_cnt = 0;
else if (scsi_debug_no_lun_0 && (lun_cnt > 0))
--lun_cnt;
wlun = (select_report > 0) ? 1 : 0;
num = lun_cnt + wlun;
arr[2] = ((sizeof(struct scsi_lun) * num) >> 8) & 0xff;
arr[3] = (sizeof(struct scsi_lun) * num) & 0xff;
n = min((int)((SDEBUG_RLUN_ARR_SZ - 8) /
sizeof(struct scsi_lun)), num);
if (n < num) {
wlun = 0;
lun_cnt = n;
}
one_lun = (struct scsi_lun *) &arr[8];
max_addr = arr + SDEBUG_RLUN_ARR_SZ;
for (i = 0, lun = (scsi_debug_no_lun_0 ? 1 : 0);
((i < lun_cnt) && ((unsigned char *)(one_lun + i) < max_addr));
i++, lun++) {
upper = (lun >> 8) & 0x3f;
if (upper)
one_lun[i].scsi_lun[0] =
(upper | (SAM2_LUN_ADDRESS_METHOD << 6));
one_lun[i].scsi_lun[1] = lun & 0xff;
}
if (wlun) {
one_lun[i].scsi_lun[0] = (SAM2_WLUN_REPORT_LUNS >> 8) & 0xff;
one_lun[i].scsi_lun[1] = SAM2_WLUN_REPORT_LUNS & 0xff;
i++;
}
alloc_len = (unsigned char *)(one_lun + i) - arr;
return fill_from_dev_buffer(scp, arr,
min((int)alloc_len, SDEBUG_RLUN_ARR_SZ));
}
static int resp_xdwriteread(struct scsi_cmnd *scp, unsigned long long lba,
unsigned int num, struct sdebug_dev_info *devip)
{
int i, j, ret = -1;
unsigned char *kaddr, *buf;
unsigned int offset;
struct scatterlist *sg;
struct scsi_data_buffer *sdb = scsi_in(scp);
/* better not to use temporary buffer. */
buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
if (!buf)
return ret;
scsi_sg_copy_to_buffer(scp, buf, scsi_bufflen(scp));
offset = 0;
for_each_sg(sdb->table.sgl, sg, sdb->table.nents, i) {
kaddr = (unsigned char *)kmap_atomic(sg_page(sg), KM_USER0);
if (!kaddr)
goto out;
for (j = 0; j < sg->length; j++)
*(kaddr + sg->offset + j) ^= *(buf + offset + j);
offset += sg->length;
kunmap_atomic(kaddr, KM_USER0);
}
ret = 0;
out:
kfree(buf);
return ret;
}
/* When timer goes off this function is called. */
static void timer_intr_handler(unsigned long indx)
{
struct sdebug_queued_cmd * sqcp;
unsigned long iflags;
if (indx >= scsi_debug_max_queue) {
printk(KERN_ERR "scsi_debug:timer_intr_handler: indx too "
"large\n");
return;
}
spin_lock_irqsave(&queued_arr_lock, iflags);
sqcp = &queued_arr[(int)indx];
if (! sqcp->in_use) {
printk(KERN_ERR "scsi_debug:timer_intr_handler: Unexpected "
"interrupt\n");
spin_unlock_irqrestore(&queued_arr_lock, iflags);
return;
}
sqcp->in_use = 0;
if (sqcp->done_funct) {
sqcp->a_cmnd->result = sqcp->scsi_result;
sqcp->done_funct(sqcp->a_cmnd); /* callback to mid level */
}
sqcp->done_funct = NULL;
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
static struct sdebug_dev_info *
sdebug_device_create(struct sdebug_host_info *sdbg_host, gfp_t flags)
{
struct sdebug_dev_info *devip;
devip = kzalloc(sizeof(*devip), flags);
if (devip) {
devip->sdbg_host = sdbg_host;
list_add_tail(&devip->dev_list, &sdbg_host->dev_info_list);
}
return devip;
}
static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
{
struct sdebug_host_info * sdbg_host;
struct sdebug_dev_info * open_devip = NULL;
struct sdebug_dev_info * devip =
(struct sdebug_dev_info *)sdev->hostdata;
if (devip)
return devip;
sdbg_host = *(struct sdebug_host_info **)shost_priv(sdev->host);
if (!sdbg_host) {
printk(KERN_ERR "Host info NULL\n");
return NULL;
}
list_for_each_entry(devip, &sdbg_host->dev_info_list, dev_list) {
if ((devip->used) && (devip->channel == sdev->channel) &&
(devip->target == sdev->id) &&
(devip->lun == sdev->lun))
return devip;
else {
if ((!devip->used) && (!open_devip))
open_devip = devip;
}
}
if (!open_devip) { /* try and make a new one */
open_devip = sdebug_device_create(sdbg_host, GFP_ATOMIC);
if (!open_devip) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__func__, __LINE__);
return NULL;
}
}
open_devip->channel = sdev->channel;
open_devip->target = sdev->id;
open_devip->lun = sdev->lun;
open_devip->sdbg_host = sdbg_host;
open_devip->reset = 1;
open_devip->used = 1;
memset(open_devip->sense_buff, 0, SDEBUG_SENSE_LEN);
if (scsi_debug_dsense)
open_devip->sense_buff[0] = 0x72;
else {
open_devip->sense_buff[0] = 0x70;
open_devip->sense_buff[7] = 0xa;
}
if (sdev->lun == SAM2_WLUN_REPORT_LUNS)
open_devip->wlun = SAM2_WLUN_REPORT_LUNS & 0xff;
return open_devip;
}
static int scsi_debug_slave_alloc(struct scsi_device *sdp)
{
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: slave_alloc <%u %u %u %u>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
queue_flag_set_unlocked(QUEUE_FLAG_BIDI, sdp->request_queue);
return 0;
}
static int scsi_debug_slave_configure(struct scsi_device *sdp)
{
struct sdebug_dev_info *devip;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: slave_configure <%u %u %u %u>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
devip = devInfoReg(sdp);
if (NULL == devip)
return 1; /* no resources, will be marked offline */
sdp->hostdata = devip;
if (sdp->host->cmd_per_lun)
scsi_adjust_queue_depth(sdp, SDEBUG_TAGGED_QUEUING,
sdp->host->cmd_per_lun);
blk_queue_max_segment_size(sdp->request_queue, 256 * 1024);
if (scsi_debug_no_uld)
sdp->no_uld_attach = 1;
return 0;
}
static void scsi_debug_slave_destroy(struct scsi_device *sdp)
{
struct sdebug_dev_info *devip =
(struct sdebug_dev_info *)sdp->hostdata;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %u>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (devip) {
/* make this slot avaliable for re-use */
devip->used = 0;
sdp->hostdata = NULL;
}
}
/* Returns 1 if found 'cmnd' and deleted its timer. else returns 0 */
static int stop_queued_cmnd(struct scsi_cmnd *cmnd)
{
unsigned long iflags;
int k;
struct sdebug_queued_cmd *sqcp;
spin_lock_irqsave(&queued_arr_lock, iflags);
for (k = 0; k < scsi_debug_max_queue; ++k) {
sqcp = &queued_arr[k];
if (sqcp->in_use && (cmnd == sqcp->a_cmnd)) {
del_timer_sync(&sqcp->cmnd_timer);
sqcp->in_use = 0;
sqcp->a_cmnd = NULL;
break;
}
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
return (k < scsi_debug_max_queue) ? 1 : 0;
}
/* Deletes (stops) timers of all queued commands */
static void stop_all_queued(void)
{
unsigned long iflags;
int k;
struct sdebug_queued_cmd *sqcp;
spin_lock_irqsave(&queued_arr_lock, iflags);
for (k = 0; k < scsi_debug_max_queue; ++k) {
sqcp = &queued_arr[k];
if (sqcp->in_use && sqcp->a_cmnd) {
del_timer_sync(&sqcp->cmnd_timer);
sqcp->in_use = 0;
sqcp->a_cmnd = NULL;
}
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
static int scsi_debug_abort(struct scsi_cmnd * SCpnt)
{
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: abort\n");
++num_aborts;
stop_queued_cmnd(SCpnt);
return SUCCESS;
}
static int scsi_debug_biosparam(struct scsi_device *sdev,
struct block_device * bdev, sector_t capacity, int *info)
{
int res;
unsigned char *buf;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: biosparam\n");
buf = scsi_bios_ptable(bdev);
if (buf) {
res = scsi_partsize(buf, capacity,
&info[2], &info[0], &info[1]);
kfree(buf);
if (! res)
return res;
}
info[0] = sdebug_heads;
info[1] = sdebug_sectors_per;
info[2] = sdebug_cylinders_per;
return 0;
}
static int scsi_debug_device_reset(struct scsi_cmnd * SCpnt)
{
struct sdebug_dev_info * devip;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: device_reset\n");
++num_dev_resets;
if (SCpnt) {
devip = devInfoReg(SCpnt->device);
if (devip)
devip->reset = 1;
}
return SUCCESS;
}
static int scsi_debug_bus_reset(struct scsi_cmnd * SCpnt)
{
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info * dev_info;
struct scsi_device * sdp;
struct Scsi_Host * hp;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: bus_reset\n");
++num_bus_resets;
if (SCpnt && ((sdp = SCpnt->device)) && ((hp = sdp->host))) {
sdbg_host = *(struct sdebug_host_info **)shost_priv(hp);
if (sdbg_host) {
list_for_each_entry(dev_info,
&sdbg_host->dev_info_list,
dev_list)
dev_info->reset = 1;
}
}
return SUCCESS;
}
static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
{
struct sdebug_host_info * sdbg_host;
struct sdebug_dev_info * dev_info;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: host_reset\n");
++num_host_resets;
spin_lock(&sdebug_host_list_lock);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
list_for_each_entry(dev_info, &sdbg_host->dev_info_list,
dev_list)
dev_info->reset = 1;
}
spin_unlock(&sdebug_host_list_lock);
stop_all_queued();
return SUCCESS;
}
/* Initializes timers in queued array */
static void __init init_all_queued(void)
{
unsigned long iflags;
int k;
struct sdebug_queued_cmd * sqcp;
spin_lock_irqsave(&queued_arr_lock, iflags);
for (k = 0; k < scsi_debug_max_queue; ++k) {
sqcp = &queued_arr[k];
init_timer(&sqcp->cmnd_timer);
sqcp->in_use = 0;
sqcp->a_cmnd = NULL;
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
static void __init sdebug_build_parts(unsigned char *ramp,
unsigned long store_size)
{
struct partition * pp;
int starts[SDEBUG_MAX_PARTS + 2];
int sectors_per_part, num_sectors, k;
int heads_by_sects, start_sec, end_sec;
/* assume partition table already zeroed */
if ((scsi_debug_num_parts < 1) || (store_size < 1048576))
return;
if (scsi_debug_num_parts > SDEBUG_MAX_PARTS) {
scsi_debug_num_parts = SDEBUG_MAX_PARTS;
printk(KERN_WARNING "scsi_debug:build_parts: reducing "
"partitions to %d\n", SDEBUG_MAX_PARTS);
}
num_sectors = (int)sdebug_store_sectors;
sectors_per_part = (num_sectors - sdebug_sectors_per)
/ scsi_debug_num_parts;
heads_by_sects = sdebug_heads * sdebug_sectors_per;
starts[0] = sdebug_sectors_per;
for (k = 1; k < scsi_debug_num_parts; ++k)
starts[k] = ((k * sectors_per_part) / heads_by_sects)
* heads_by_sects;
starts[scsi_debug_num_parts] = num_sectors;
starts[scsi_debug_num_parts + 1] = 0;
ramp[510] = 0x55; /* magic partition markings */
ramp[511] = 0xAA;
pp = (struct partition *)(ramp + 0x1be);
for (k = 0; starts[k + 1]; ++k, ++pp) {
start_sec = starts[k];
end_sec = starts[k + 1] - 1;
pp->boot_ind = 0;
pp->cyl = start_sec / heads_by_sects;
pp->head = (start_sec - (pp->cyl * heads_by_sects))
/ sdebug_sectors_per;
pp->sector = (start_sec % sdebug_sectors_per) + 1;
pp->end_cyl = end_sec / heads_by_sects;
pp->end_head = (end_sec - (pp->end_cyl * heads_by_sects))
/ sdebug_sectors_per;
pp->end_sector = (end_sec % sdebug_sectors_per) + 1;
pp->start_sect = start_sec;
pp->nr_sects = end_sec - start_sec + 1;
pp->sys_ind = 0x83; /* plain Linux partition */
}
}
static int schedule_resp(struct scsi_cmnd * cmnd,
struct sdebug_dev_info * devip,
done_funct_t done, int scsi_result, int delta_jiff)
{
if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmnd) {
if (scsi_result) {
struct scsi_device * sdp = cmnd->device;
printk(KERN_INFO "scsi_debug: <%u %u %u %u> "
"non-zero result=0x%x\n", sdp->host->host_no,
sdp->channel, sdp->id, sdp->lun, scsi_result);
}
}
if (cmnd && devip) {
/* simulate autosense by this driver */
if (SAM_STAT_CHECK_CONDITION == (scsi_result & 0xff))
memcpy(cmnd->sense_buffer, devip->sense_buff,
(SCSI_SENSE_BUFFERSIZE > SDEBUG_SENSE_LEN) ?
SDEBUG_SENSE_LEN : SCSI_SENSE_BUFFERSIZE);
}
if (delta_jiff <= 0) {
if (cmnd)
cmnd->result = scsi_result;
if (done)
done(cmnd);
return 0;
} else {
unsigned long iflags;
int k;
struct sdebug_queued_cmd * sqcp = NULL;
spin_lock_irqsave(&queued_arr_lock, iflags);
for (k = 0; k < scsi_debug_max_queue; ++k) {
sqcp = &queued_arr[k];
if (! sqcp->in_use)
break;
}
if (k >= scsi_debug_max_queue) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
printk(KERN_WARNING "scsi_debug: can_queue exceeded\n");
return 1; /* report busy to mid level */
}
sqcp->in_use = 1;
sqcp->a_cmnd = cmnd;
sqcp->scsi_result = scsi_result;
sqcp->done_funct = done;
sqcp->cmnd_timer.function = timer_intr_handler;
sqcp->cmnd_timer.data = k;
sqcp->cmnd_timer.expires = jiffies + delta_jiff;
add_timer(&sqcp->cmnd_timer);
spin_unlock_irqrestore(&queued_arr_lock, iflags);
if (cmnd)
cmnd->result = 0;
return 0;
}
}
/* Note: The following macros create attribute files in the
/sys/module/scsi_debug/parameters directory. Unfortunately this
driver is unaware of a change and cannot trigger auxiliary actions
as it can when the corresponding attribute in the
/sys/bus/pseudo/drivers/scsi_debug directory is changed.
*/
module_param_named(add_host, scsi_debug_add_host, int, S_IRUGO | S_IWUSR);
module_param_named(delay, scsi_debug_delay, int, S_IRUGO | S_IWUSR);
module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, S_IRUGO);
module_param_named(dsense, scsi_debug_dsense, int, S_IRUGO | S_IWUSR);
module_param_named(every_nth, scsi_debug_every_nth, int, S_IRUGO | S_IWUSR);
module_param_named(fake_rw, scsi_debug_fake_rw, int, S_IRUGO | S_IWUSR);
module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR);
module_param_named(no_lun_0, scsi_debug_no_lun_0, int, S_IRUGO | S_IWUSR);
module_param_named(no_uld, scsi_debug_no_uld, int, S_IRUGO);
module_param_named(num_parts, scsi_debug_num_parts, int, S_IRUGO);
module_param_named(num_tgts, scsi_debug_num_tgts, int, S_IRUGO | S_IWUSR);
module_param_named(opts, scsi_debug_opts, int, S_IRUGO | S_IWUSR);
module_param_named(ptype, scsi_debug_ptype, int, S_IRUGO | S_IWUSR);
module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO);
module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR);
module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int,
S_IRUGO | S_IWUSR);
module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO);
module_param_named(dix, scsi_debug_dix, int, S_IRUGO);
module_param_named(dif, scsi_debug_dif, int, S_IRUGO);
module_param_named(guard, scsi_debug_guard, int, S_IRUGO);
module_param_named(ato, scsi_debug_ato, int, S_IRUGO);
module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
module_param_named(opt_blks, scsi_debug_opt_blks, int, S_IRUGO);
module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
module_param_named(unmap_max_blocks, scsi_debug_unmap_max_blocks, int, S_IRUGO);
module_param_named(unmap_max_desc, scsi_debug_unmap_max_desc, int, S_IRUGO);
module_param_named(unmap_granularity, scsi_debug_unmap_granularity, int, S_IRUGO);
module_param_named(unmap_alignment, scsi_debug_unmap_alignment, int, S_IRUGO);
module_param_named(tpu, scsi_debug_tpu, int, S_IRUGO);
module_param_named(tpws, scsi_debug_tpws, int, S_IRUGO);
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
MODULE_DESCRIPTION("SCSI debug adapter driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(SCSI_DEBUG_VERSION);
MODULE_PARM_DESC(add_host, "0..127 hosts allowed(def=1)");
MODULE_PARM_DESC(delay, "# of jiffies to delay response(def=1)");
MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs(def=8)");
MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)");
MODULE_PARM_DESC(every_nth, "timeout every nth command(def=0)");
MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to 255(def))");
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(no_uld, "stop ULD (e.g. sd driver) attaching (def=0))");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=5[SPC-3])");
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)");
MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
MODULE_PARM_DESC(opt_blks, "optimal transfer length in block (def=64)");
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)");
MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)");
MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)");
MODULE_PARM_DESC(unmap_max_blocks, "max # of blocks can be unmapped in one cmd (def=0xffffffff)");
MODULE_PARM_DESC(unmap_max_desc, "max # of ranges that can be unmapped in one cmd (def=256)");
MODULE_PARM_DESC(unmap_granularity, "thin provisioning granularity in blocks (def=1)");
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba (def=0)");
MODULE_PARM_DESC(tpu, "enable TP, support UNMAP command (def=0)");
MODULE_PARM_DESC(tpws, "enable TP, support WRITE SAME(16) with UNMAP bit (def=0)");
static char sdebug_info[256];
static const char * scsi_debug_info(struct Scsi_Host * shp)
{
sprintf(sdebug_info, "scsi_debug, version %s [%s], "
"dev_size_mb=%d, opts=0x%x", SCSI_DEBUG_VERSION,
scsi_debug_version_date, scsi_debug_dev_size_mb,
scsi_debug_opts);
return sdebug_info;
}
/* scsi_debug_proc_info
* Used if the driver currently has no own support for /proc/scsi
*/
static int scsi_debug_proc_info(struct Scsi_Host *host, char *buffer, char **start, off_t offset,
int length, int inout)
{
int len, pos, begin;
int orig_length;
orig_length = length;
if (inout == 1) {
char arr[16];
int minLen = length > 15 ? 15 : length;
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
return -EACCES;
memcpy(arr, buffer, minLen);
arr[minLen] = '\0';
if (1 != sscanf(arr, "%d", &pos))
return -EINVAL;
scsi_debug_opts = pos;
if (scsi_debug_every_nth != 0)
scsi_debug_cmnd_count = 0;
return length;
}
begin = 0;
pos = len = sprintf(buffer, "scsi_debug adapter driver, version "
"%s [%s]\n"
"num_tgts=%d, shared (ram) size=%d MB, opts=0x%x, "
"every_nth=%d(curr:%d)\n"
"delay=%d, max_luns=%d, scsi_level=%d\n"
"sector_size=%d bytes, cylinders=%d, heads=%d, sectors=%d\n"
"number of aborts=%d, device_reset=%d, bus_resets=%d, "
"host_resets=%d\ndix_reads=%d dix_writes=%d dif_errors=%d\n",
SCSI_DEBUG_VERSION, scsi_debug_version_date, scsi_debug_num_tgts,
scsi_debug_dev_size_mb, scsi_debug_opts, scsi_debug_every_nth,
scsi_debug_cmnd_count, scsi_debug_delay,
scsi_debug_max_luns, scsi_debug_scsi_level,
scsi_debug_sector_size, sdebug_cylinders_per, sdebug_heads,
sdebug_sectors_per, num_aborts, num_dev_resets, num_bus_resets,
num_host_resets, dix_reads, dix_writes, dif_errors);
if (pos < offset) {
len = 0;
begin = pos;
}
*start = buffer + (offset - begin); /* Start of wanted data */
len -= (offset - begin);
if (len > length)
len = length;
return len;
}
static ssize_t sdebug_delay_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_delay);
}
static ssize_t sdebug_delay_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int delay;
char work[20];
if (1 == sscanf(buf, "%10s", work)) {
if ((1 == sscanf(work, "%d", &delay)) && (delay >= 0)) {
scsi_debug_delay = delay;
return count;
}
}
return -EINVAL;
}
DRIVER_ATTR(delay, S_IRUGO | S_IWUSR, sdebug_delay_show,
sdebug_delay_store);
static ssize_t sdebug_opts_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "0x%x\n", scsi_debug_opts);
}
static ssize_t sdebug_opts_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int opts;
char work[20];
if (1 == sscanf(buf, "%10s", work)) {
if (0 == strnicmp(work,"0x", 2)) {
if (1 == sscanf(&work[2], "%x", &opts))
goto opts_done;
} else {
if (1 == sscanf(work, "%d", &opts))
goto opts_done;
}
}
return -EINVAL;
opts_done:
scsi_debug_opts = opts;
scsi_debug_cmnd_count = 0;
return count;
}
DRIVER_ATTR(opts, S_IRUGO | S_IWUSR, sdebug_opts_show,
sdebug_opts_store);
static ssize_t sdebug_ptype_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ptype);
}
static ssize_t sdebug_ptype_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_ptype = n;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(ptype, S_IRUGO | S_IWUSR, sdebug_ptype_show, sdebug_ptype_store);
static ssize_t sdebug_dsense_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dsense);
}
static ssize_t sdebug_dsense_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_dsense = n;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(dsense, S_IRUGO | S_IWUSR, sdebug_dsense_show,
sdebug_dsense_store);
static ssize_t sdebug_fake_rw_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_fake_rw);
}
static ssize_t sdebug_fake_rw_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_fake_rw = n;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(fake_rw, S_IRUGO | S_IWUSR, sdebug_fake_rw_show,
sdebug_fake_rw_store);
static ssize_t sdebug_no_lun_0_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_lun_0);
}
static ssize_t sdebug_no_lun_0_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_no_lun_0 = n;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(no_lun_0, S_IRUGO | S_IWUSR, sdebug_no_lun_0_show,
sdebug_no_lun_0_store);
static ssize_t sdebug_num_tgts_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_tgts);
}
static ssize_t sdebug_num_tgts_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_num_tgts = n;
sdebug_max_tgts_luns();
return count;
}
return -EINVAL;
}
DRIVER_ATTR(num_tgts, S_IRUGO | S_IWUSR, sdebug_num_tgts_show,
sdebug_num_tgts_store);
static ssize_t sdebug_dev_size_mb_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dev_size_mb);
}
DRIVER_ATTR(dev_size_mb, S_IRUGO, sdebug_dev_size_mb_show, NULL);
static ssize_t sdebug_num_parts_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_parts);
}
DRIVER_ATTR(num_parts, S_IRUGO, sdebug_num_parts_show, NULL);
static ssize_t sdebug_every_nth_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_every_nth);
}
static ssize_t sdebug_every_nth_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int nth;
if ((count > 0) && (1 == sscanf(buf, "%d", &nth))) {
scsi_debug_every_nth = nth;
scsi_debug_cmnd_count = 0;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(every_nth, S_IRUGO | S_IWUSR, sdebug_every_nth_show,
sdebug_every_nth_store);
static ssize_t sdebug_max_luns_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_luns);
}
static ssize_t sdebug_max_luns_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_max_luns = n;
sdebug_max_tgts_luns();
return count;
}
return -EINVAL;
}
DRIVER_ATTR(max_luns, S_IRUGO | S_IWUSR, sdebug_max_luns_show,
sdebug_max_luns_store);
static ssize_t sdebug_max_queue_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_queue);
}
static ssize_t sdebug_max_queue_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n > 0) &&
(n <= SCSI_DEBUG_CANQUEUE)) {
scsi_debug_max_queue = n;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(max_queue, S_IRUGO | S_IWUSR, sdebug_max_queue_show,
sdebug_max_queue_store);
static ssize_t sdebug_no_uld_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_uld);
}
DRIVER_ATTR(no_uld, S_IRUGO, sdebug_no_uld_show, NULL);
static ssize_t sdebug_scsi_level_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_scsi_level);
}
DRIVER_ATTR(scsi_level, S_IRUGO, sdebug_scsi_level_show, NULL);
static ssize_t sdebug_virtual_gb_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_virtual_gb);
}
static ssize_t sdebug_virtual_gb_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_virtual_gb = n;
sdebug_capacity = get_sdebug_capacity();
return count;
}
return -EINVAL;
}
DRIVER_ATTR(virtual_gb, S_IRUGO | S_IWUSR, sdebug_virtual_gb_show,
sdebug_virtual_gb_store);
static ssize_t sdebug_add_host_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_add_host);
}
static ssize_t sdebug_add_host_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int delta_hosts;
if (sscanf(buf, "%d", &delta_hosts) != 1)
return -EINVAL;
if (delta_hosts > 0) {
do {
sdebug_add_adapter();
} while (--delta_hosts);
} else if (delta_hosts < 0) {
do {
sdebug_remove_adapter();
} while (++delta_hosts);
}
return count;
}
DRIVER_ATTR(add_host, S_IRUGO | S_IWUSR, sdebug_add_host_show,
sdebug_add_host_store);
static ssize_t sdebug_vpd_use_hostno_show(struct device_driver * ddp,
char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_vpd_use_hostno);
}
static ssize_t sdebug_vpd_use_hostno_store(struct device_driver * ddp,
const char * buf, size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_vpd_use_hostno = n;
return count;
}
return -EINVAL;
}
DRIVER_ATTR(vpd_use_hostno, S_IRUGO | S_IWUSR, sdebug_vpd_use_hostno_show,
sdebug_vpd_use_hostno_store);
static ssize_t sdebug_sector_size_show(struct device_driver * ddp, char * buf)
{
return scnprintf(buf, PAGE_SIZE, "%u\n", scsi_debug_sector_size);
}
DRIVER_ATTR(sector_size, S_IRUGO, sdebug_sector_size_show, NULL);
static ssize_t sdebug_dix_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dix);
}
DRIVER_ATTR(dix, S_IRUGO, sdebug_dix_show, NULL);
static ssize_t sdebug_dif_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dif);
}
DRIVER_ATTR(dif, S_IRUGO, sdebug_dif_show, NULL);
static ssize_t sdebug_guard_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_guard);
}
DRIVER_ATTR(guard, S_IRUGO, sdebug_guard_show, NULL);
static ssize_t sdebug_ato_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ato);
}
DRIVER_ATTR(ato, S_IRUGO, sdebug_ato_show, NULL);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static ssize_t sdebug_map_show(struct device_driver *ddp, char *buf)
{
ssize_t count;
if (scsi_debug_tpu == 0 && scsi_debug_tpws == 0)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return scnprintf(buf, PAGE_SIZE, "0-%u\n",
sdebug_store_sectors);
count = bitmap_scnlistprintf(buf, PAGE_SIZE, map_storep, map_size);
buf[count++] = '\n';
buf[count++] = 0;
return count;
}
DRIVER_ATTR(map, S_IRUGO, sdebug_map_show, NULL);
/* Note: The following function creates attribute files in the
/sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
files (over those found in the /sys/module/scsi_debug/parameters
directory) is that auxiliary actions can be triggered when an attribute
is changed. For example see: sdebug_add_host_store() above.
*/
static int do_create_driverfs_files(void)
{
int ret;
ret = driver_create_file(&sdebug_driverfs_driver, &driver_attr_add_host);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_delay);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dsense);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_fake_rw);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_max_queue);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_no_uld);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ptype);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_opts);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_sector_size);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dix);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_dif);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_guard);
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_ato);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
ret |= driver_create_file(&sdebug_driverfs_driver, &driver_attr_map);
return ret;
}
static void do_remove_driverfs_files(void)
{
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_map);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ato);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_guard);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dif);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dix);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_sector_size);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_vpd_use_hostno);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_virtual_gb);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_scsi_level);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_opts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_ptype);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_tgts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_num_parts);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_uld);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_no_lun_0);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_queue);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_max_luns);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_fake_rw);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_every_nth);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dsense);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_dev_size_mb);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_delay);
driver_remove_file(&sdebug_driverfs_driver, &driver_attr_add_host);
}
struct device *pseudo_primary;
static int __init scsi_debug_init(void)
{
unsigned long sz;
int host_to_add;
int k;
int ret;
switch (scsi_debug_sector_size) {
case 512:
case 1024:
case 2048:
case 4096:
break;
default:
printk(KERN_ERR "scsi_debug_init: invalid sector_size %d\n",
scsi_debug_sector_size);
return -EINVAL;
}
switch (scsi_debug_dif) {
case SD_DIF_TYPE0_PROTECTION:
case SD_DIF_TYPE1_PROTECTION:
case SD_DIF_TYPE2_PROTECTION:
case SD_DIF_TYPE3_PROTECTION:
break;
default:
printk(KERN_ERR "scsi_debug_init: dif must be 0, 1, 2 or 3\n");
return -EINVAL;
}
if (scsi_debug_guard > 1) {
printk(KERN_ERR "scsi_debug_init: guard must be 0 or 1\n");
return -EINVAL;
}
if (scsi_debug_ato > 1) {
printk(KERN_ERR "scsi_debug_init: ato must be 0 or 1\n");
return -EINVAL;
}
if (scsi_debug_physblk_exp > 15) {
printk(KERN_ERR "scsi_debug_init: invalid physblk_exp %u\n",
scsi_debug_physblk_exp);
return -EINVAL;
}
if (scsi_debug_lowest_aligned > 0x3fff) {
printk(KERN_ERR "scsi_debug_init: lowest_aligned too big: %u\n",
scsi_debug_lowest_aligned);
return -EINVAL;
}
if (scsi_debug_dev_size_mb < 1)
scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */
sz = (unsigned long)scsi_debug_dev_size_mb * 1048576;
sdebug_store_sectors = sz / scsi_debug_sector_size;
sdebug_capacity = get_sdebug_capacity();
/* play around with geometry, don't waste too much on track 0 */
sdebug_heads = 8;
sdebug_sectors_per = 32;
if (scsi_debug_dev_size_mb >= 16)
sdebug_heads = 32;
else if (scsi_debug_dev_size_mb >= 256)
sdebug_heads = 64;
sdebug_cylinders_per = (unsigned long)sdebug_capacity /
(sdebug_sectors_per * sdebug_heads);
if (sdebug_cylinders_per >= 1024) {
/* other LLDs do this; implies >= 1GB ram disk ... */
sdebug_heads = 255;
sdebug_sectors_per = 63;
sdebug_cylinders_per = (unsigned long)sdebug_capacity /
(sdebug_sectors_per * sdebug_heads);
}
fake_storep = vmalloc(sz);
if (NULL == fake_storep) {
printk(KERN_ERR "scsi_debug_init: out of memory, 1\n");
return -ENOMEM;
}
memset(fake_storep, 0, sz);
if (scsi_debug_num_parts > 0)
sdebug_build_parts(fake_storep, sz);
if (scsi_debug_dif) {
int dif_size;
dif_size = sdebug_store_sectors * sizeof(struct sd_dif_tuple);
dif_storep = vmalloc(dif_size);
printk(KERN_ERR "scsi_debug_init: dif_storep %u bytes @ %p\n",
dif_size, dif_storep);
if (dif_storep == NULL) {
printk(KERN_ERR "scsi_debug_init: out of mem. (DIX)\n");
ret = -ENOMEM;
goto free_vm;
}
memset(dif_storep, 0xff, dif_size);
}
/* Thin Provisioning */
if (scsi_debug_tpu || scsi_debug_tpws) {
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
unsigned int map_bytes;
scsi_debug_unmap_max_blocks =
clamp(scsi_debug_unmap_max_blocks, 0U, 0xffffffffU);
scsi_debug_unmap_max_desc =
clamp(scsi_debug_unmap_max_desc, 0U, 256U);
scsi_debug_unmap_granularity =
clamp(scsi_debug_unmap_granularity, 1U, 0xffffffffU);
if (scsi_debug_unmap_alignment &&
scsi_debug_unmap_granularity < scsi_debug_unmap_alignment) {
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
printk(KERN_ERR
"%s: ERR: unmap_granularity < unmap_alignment\n",
__func__);
return -EINVAL;
}
map_size = (sdebug_store_sectors / scsi_debug_unmap_granularity);
map_bytes = map_size >> 3;
map_storep = vmalloc(map_bytes);
printk(KERN_INFO "scsi_debug_init: %lu provisioning blocks\n",
map_size);
if (map_storep == NULL) {
printk(KERN_ERR "scsi_debug_init: out of mem. (MAP)\n");
ret = -ENOMEM;
goto free_vm;
}
memset(map_storep, 0x0, map_bytes);
/* Map first 1KB for partition table */
if (scsi_debug_num_parts)
map_region(0, 2);
}
pseudo_primary = root_device_register("pseudo_0");
if (IS_ERR(pseudo_primary)) {
printk(KERN_WARNING "scsi_debug: root_device_register() error\n");
ret = PTR_ERR(pseudo_primary);
goto free_vm;
}
ret = bus_register(&pseudo_lld_bus);
if (ret < 0) {
printk(KERN_WARNING "scsi_debug: bus_register error: %d\n",
ret);
goto dev_unreg;
}
ret = driver_register(&sdebug_driverfs_driver);
if (ret < 0) {
printk(KERN_WARNING "scsi_debug: driver_register error: %d\n",
ret);
goto bus_unreg;
}
ret = do_create_driverfs_files();
if (ret < 0) {
printk(KERN_WARNING "scsi_debug: driver_create_file error: %d\n",
ret);
goto del_files;
}
init_all_queued();
host_to_add = scsi_debug_add_host;
scsi_debug_add_host = 0;
for (k = 0; k < host_to_add; k++) {
if (sdebug_add_adapter()) {
printk(KERN_ERR "scsi_debug_init: "
"sdebug_add_adapter failed k=%d\n", k);
break;
}
}
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
printk(KERN_INFO "scsi_debug_init: built %d host(s)\n",
scsi_debug_add_host);
}
return 0;
del_files:
do_remove_driverfs_files();
driver_unregister(&sdebug_driverfs_driver);
bus_unreg:
bus_unregister(&pseudo_lld_bus);
dev_unreg:
root_device_unregister(pseudo_primary);
free_vm:
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (map_storep)
vfree(map_storep);
if (dif_storep)
vfree(dif_storep);
vfree(fake_storep);
return ret;
}
static void __exit scsi_debug_exit(void)
{
int k = scsi_debug_add_host;
stop_all_queued();
for (; k; k--)
sdebug_remove_adapter();
do_remove_driverfs_files();
driver_unregister(&sdebug_driverfs_driver);
bus_unregister(&pseudo_lld_bus);
root_device_unregister(pseudo_primary);
if (dif_storep)
vfree(dif_storep);
vfree(fake_storep);
}
device_initcall(scsi_debug_init);
module_exit(scsi_debug_exit);
static void sdebug_release_adapter(struct device * dev)
{
struct sdebug_host_info *sdbg_host;
sdbg_host = to_sdebug_host(dev);
kfree(sdbg_host);
}
static int sdebug_add_adapter(void)
{
int k, devs_per_host;
int error = 0;
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *sdbg_devinfo, *tmp;
sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
if (NULL == sdbg_host) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__func__, __LINE__);
return -ENOMEM;
}
INIT_LIST_HEAD(&sdbg_host->dev_info_list);
devs_per_host = scsi_debug_num_tgts * scsi_debug_max_luns;
for (k = 0; k < devs_per_host; k++) {
sdbg_devinfo = sdebug_device_create(sdbg_host, GFP_KERNEL);
if (!sdbg_devinfo) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__func__, __LINE__);
error = -ENOMEM;
goto clean;
}
}
spin_lock(&sdebug_host_list_lock);
list_add_tail(&sdbg_host->host_list, &sdebug_host_list);
spin_unlock(&sdebug_host_list_lock);
sdbg_host->dev.bus = &pseudo_lld_bus;
sdbg_host->dev.parent = pseudo_primary;
sdbg_host->dev.release = &sdebug_release_adapter;
dev_set_name(&sdbg_host->dev, "adapter%d", scsi_debug_add_host);
error = device_register(&sdbg_host->dev);
if (error)
goto clean;
++scsi_debug_add_host;
return error;
clean:
list_for_each_entry_safe(sdbg_devinfo, tmp, &sdbg_host->dev_info_list,
dev_list) {
list_del(&sdbg_devinfo->dev_list);
kfree(sdbg_devinfo);
}
kfree(sdbg_host);
return error;
}
static void sdebug_remove_adapter(void)
{
struct sdebug_host_info * sdbg_host = NULL;
spin_lock(&sdebug_host_list_lock);
if (!list_empty(&sdebug_host_list)) {
sdbg_host = list_entry(sdebug_host_list.prev,
struct sdebug_host_info, host_list);
list_del(&sdbg_host->host_list);
}
spin_unlock(&sdebug_host_list_lock);
if (!sdbg_host)
return;
device_unregister(&sdbg_host->dev);
--scsi_debug_add_host;
}
static
int scsi_debug_queuecommand_lck(struct scsi_cmnd *SCpnt, done_funct_t done)
{
unsigned char *cmd = (unsigned char *) SCpnt->cmnd;
int len, k;
unsigned int num;
unsigned long long lba;
u32 ei_lba;
int errsts = 0;
int target = SCpnt->device->id;
struct sdebug_dev_info *devip = NULL;
int inj_recovered = 0;
int inj_transport = 0;
int inj_dif = 0;
int inj_dix = 0;
int delay_override = 0;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
int unmap = 0;
scsi_set_resid(SCpnt, 0);
if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) && cmd) {
printk(KERN_INFO "scsi_debug: cmd ");
for (k = 0, len = SCpnt->cmd_len; k < len; ++k)
printk("%02x ", (int)cmd[k]);
printk("\n");
}
if (target == SCpnt->device->host->hostt->this_id) {
printk(KERN_INFO "scsi_debug: initiator's id used as "
"target!\n");
return schedule_resp(SCpnt, NULL, done,
DID_NO_CONNECT << 16, 0);
}
if ((SCpnt->device->lun >= scsi_debug_max_luns) &&
(SCpnt->device->lun != SAM2_WLUN_REPORT_LUNS))
return schedule_resp(SCpnt, NULL, done,
DID_NO_CONNECT << 16, 0);
devip = devInfoReg(SCpnt->device);
if (NULL == devip)
return schedule_resp(SCpnt, NULL, done,
DID_NO_CONNECT << 16, 0);
if ((scsi_debug_every_nth != 0) &&
(++scsi_debug_cmnd_count >= abs(scsi_debug_every_nth))) {
scsi_debug_cmnd_count = 0;
if (scsi_debug_every_nth < -1)
scsi_debug_every_nth = -1;
if (SCSI_DEBUG_OPT_TIMEOUT & scsi_debug_opts)
return 0; /* ignore command causing timeout */
else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts)
inj_recovered = 1; /* to reads and writes below */
else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts)
inj_transport = 1; /* to reads and writes below */
else if (SCSI_DEBUG_OPT_DIF_ERR & scsi_debug_opts)
inj_dif = 1; /* to reads and writes below */
else if (SCSI_DEBUG_OPT_DIX_ERR & scsi_debug_opts)
inj_dix = 1; /* to reads and writes below */
}
if (devip->wlun) {
switch (*cmd) {
case INQUIRY:
case REQUEST_SENSE:
case TEST_UNIT_READY:
case REPORT_LUNS:
break; /* only allowable wlun commands */
default:
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Opcode: 0x%x "
"not supported for wlun\n", *cmd);
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_OPCODE, 0);
errsts = check_condition_result;
return schedule_resp(SCpnt, devip, done, errsts,
0);
}
}
switch (*cmd) {
case INQUIRY: /* mandatory, ignore unit attention */
delay_override = 1;
errsts = resp_inquiry(SCpnt, target, devip);
break;
case REQUEST_SENSE: /* mandatory, ignore unit attention */
delay_override = 1;
errsts = resp_requests(SCpnt, devip);
break;
case REZERO_UNIT: /* actually this is REWIND for SSC */
case START_STOP:
errsts = resp_start_stop(SCpnt, devip);
break;
case ALLOW_MEDIUM_REMOVAL:
errsts = check_readiness(SCpnt, 1, devip);
if (errsts)
break;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Medium removal %s\n",
cmd[4] ? "inhibited" : "enabled");
break;
case SEND_DIAGNOSTIC: /* mandatory */
errsts = check_readiness(SCpnt, 1, devip);
break;
case TEST_UNIT_READY: /* mandatory */
delay_override = 1;
errsts = check_readiness(SCpnt, 0, devip);
break;
case RESERVE:
errsts = check_readiness(SCpnt, 1, devip);
break;
case RESERVE_10:
errsts = check_readiness(SCpnt, 1, devip);
break;
case RELEASE:
errsts = check_readiness(SCpnt, 1, devip);
break;
case RELEASE_10:
errsts = check_readiness(SCpnt, 1, devip);
break;
case READ_CAPACITY:
errsts = resp_readcap(SCpnt, devip);
break;
case SERVICE_ACTION_IN:
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (cmd[1] == SAI_READ_CAPACITY_16)
errsts = resp_readcap16(SCpnt, devip);
else if (cmd[1] == SAI_GET_LBA_STATUS) {
if (scsi_debug_tpu == 0 && scsi_debug_tpws == 0) {
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_COMMAND_OPCODE, 0);
errsts = check_condition_result;
} else
errsts = resp_get_lba_status(SCpnt, devip);
} else {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_OPCODE, 0);
errsts = check_condition_result;
}
break;
case MAINTENANCE_IN:
if (MI_REPORT_TARGET_PGS != cmd[1]) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_OPCODE, 0);
errsts = check_condition_result;
break;
}
errsts = resp_report_tgtpgs(SCpnt, devip);
break;
case READ_16:
case READ_12:
case READ_10:
/* READ{10,12,16} and DIF Type 2 are natural enemies */
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
cmd[1] & 0xe0) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_COMMAND_OPCODE, 0);
errsts = check_condition_result;
break;
}
if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
(cmd[1] & 0xe0) == 0)
printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
/* fall through */
case READ_6:
read:
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
if (scsi_debug_fake_rw)
break;
get_data_transfer_info(cmd, &lba, &num, &ei_lba);
errsts = resp_read(SCpnt, lba, num, devip, ei_lba);
if (inj_recovered && (0 == errsts)) {
mk_sense_buffer(devip, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
errsts = check_condition_result;
} else if (inj_transport && (0 == errsts)) {
mk_sense_buffer(devip, ABORTED_COMMAND,
TRANSPORT_PROBLEM, ACK_NAK_TO);
errsts = check_condition_result;
} else if (inj_dif && (0 == errsts)) {
mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, 1);
errsts = illegal_condition_result;
} else if (inj_dix && (0 == errsts)) {
mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, 1);
errsts = illegal_condition_result;
}
break;
case REPORT_LUNS: /* mandatory, ignore unit attention */
delay_override = 1;
errsts = resp_report_luns(SCpnt, devip);
break;
case VERIFY: /* 10 byte SBC-2 command */
errsts = check_readiness(SCpnt, 0, devip);
break;
case WRITE_16:
case WRITE_12:
case WRITE_10:
/* WRITE{10,12,16} and DIF Type 2 are natural enemies */
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
cmd[1] & 0xe0) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_COMMAND_OPCODE, 0);
errsts = check_condition_result;
break;
}
if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
(cmd[1] & 0xe0) == 0)
printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
/* fall through */
case WRITE_6:
write:
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
if (scsi_debug_fake_rw)
break;
get_data_transfer_info(cmd, &lba, &num, &ei_lba);
errsts = resp_write(SCpnt, lba, num, devip, ei_lba);
if (inj_recovered && (0 == errsts)) {
mk_sense_buffer(devip, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
errsts = check_condition_result;
} else if (inj_dif && (0 == errsts)) {
mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, 1);
errsts = illegal_condition_result;
} else if (inj_dix && (0 == errsts)) {
mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, 1);
errsts = illegal_condition_result;
}
break;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
case WRITE_SAME_16:
if (cmd[1] & 0x8) {
if (scsi_debug_tpws == 0) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
errsts = check_condition_result;
} else
unmap = 1;
}
if (errsts)
break;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
/* fall through */
case WRITE_SAME:
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
get_data_transfer_info(cmd, &lba, &num, &ei_lba);
errsts = resp_write_same(SCpnt, lba, num, devip, ei_lba, unmap);
break;
case UNMAP:
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
if (scsi_debug_unmap_max_desc == 0 || scsi_debug_tpu == 0) {
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_COMMAND_OPCODE, 0);
errsts = check_condition_result;
} else
errsts = resp_unmap(SCpnt, devip);
break;
case MODE_SENSE:
case MODE_SENSE_10:
errsts = resp_mode_sense(SCpnt, target, devip);
break;
case MODE_SELECT:
errsts = resp_mode_select(SCpnt, 1, devip);
break;
case MODE_SELECT_10:
errsts = resp_mode_select(SCpnt, 0, devip);
break;
case LOG_SENSE:
errsts = resp_log_sense(SCpnt, devip);
break;
case SYNCHRONIZE_CACHE:
delay_override = 1;
errsts = check_readiness(SCpnt, 0, devip);
break;
case WRITE_BUFFER:
errsts = check_readiness(SCpnt, 1, devip);
break;
case XDWRITEREAD_10:
if (!scsi_bidi_cmnd(SCpnt)) {
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
errsts = check_condition_result;
break;
}
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
if (scsi_debug_fake_rw)
break;
get_data_transfer_info(cmd, &lba, &num, &ei_lba);
errsts = resp_read(SCpnt, lba, num, devip, ei_lba);
if (errsts)
break;
errsts = resp_write(SCpnt, lba, num, devip, ei_lba);
if (errsts)
break;
errsts = resp_xdwriteread(SCpnt, lba, num, devip);
break;
case VARIABLE_LENGTH_CMD:
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION) {
if ((cmd[10] & 0xe0) == 0)
printk(KERN_ERR
"Unprotected RD/WR to DIF device\n");
if (cmd[9] == READ_32) {
BUG_ON(SCpnt->cmd_len < 32);
goto read;
}
if (cmd[9] == WRITE_32) {
BUG_ON(SCpnt->cmd_len < 32);
goto write;
}
}
mk_sense_buffer(devip, ILLEGAL_REQUEST,
INVALID_FIELD_IN_CDB, 0);
errsts = check_condition_result;
break;
default:
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
"supported\n", *cmd);
errsts = check_readiness(SCpnt, 1, devip);
if (errsts)
break; /* Unit attention takes precedence */
mk_sense_buffer(devip, ILLEGAL_REQUEST, INVALID_OPCODE, 0);
errsts = check_condition_result;
break;
}
return schedule_resp(SCpnt, devip, done, errsts,
(delay_override ? 0 : scsi_debug_delay));
}
static DEF_SCSI_QCMD(scsi_debug_queuecommand)
static struct scsi_host_template sdebug_driver_template = {
.proc_info = scsi_debug_proc_info,
.proc_name = sdebug_proc_name,
.name = "SCSI DEBUG",
.info = scsi_debug_info,
.slave_alloc = scsi_debug_slave_alloc,
.slave_configure = scsi_debug_slave_configure,
.slave_destroy = scsi_debug_slave_destroy,
.ioctl = scsi_debug_ioctl,
.queuecommand = scsi_debug_queuecommand,
.eh_abort_handler = scsi_debug_abort,
.eh_bus_reset_handler = scsi_debug_bus_reset,
.eh_device_reset_handler = scsi_debug_device_reset,
.eh_host_reset_handler = scsi_debug_host_reset,
.bios_param = scsi_debug_biosparam,
.can_queue = SCSI_DEBUG_CANQUEUE,
.this_id = 7,
.sg_tablesize = 256,
.cmd_per_lun = 16,
.max_sectors = 0xffff,
.use_clustering = DISABLE_CLUSTERING,
.module = THIS_MODULE,
};
static int sdebug_driver_probe(struct device * dev)
{
int error = 0;
struct sdebug_host_info *sdbg_host;
struct Scsi_Host *hpnt;
int host_prot;
sdbg_host = to_sdebug_host(dev);
sdebug_driver_template.can_queue = scsi_debug_max_queue;
hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host));
if (NULL == hpnt) {
printk(KERN_ERR "%s: scsi_register failed\n", __func__);
error = -ENODEV;
return error;
}
sdbg_host->shost = hpnt;
*((struct sdebug_host_info **)hpnt->hostdata) = sdbg_host;
if ((hpnt->this_id >= 0) && (scsi_debug_num_tgts > hpnt->this_id))
hpnt->max_id = scsi_debug_num_tgts + 1;
else
hpnt->max_id = scsi_debug_num_tgts;
hpnt->max_lun = SAM2_WLUN_REPORT_LUNS; /* = scsi_debug_max_luns; */
host_prot = 0;
switch (scsi_debug_dif) {
case SD_DIF_TYPE1_PROTECTION:
host_prot = SHOST_DIF_TYPE1_PROTECTION;
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE1_PROTECTION;
break;
case SD_DIF_TYPE2_PROTECTION:
host_prot = SHOST_DIF_TYPE2_PROTECTION;
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE2_PROTECTION;
break;
case SD_DIF_TYPE3_PROTECTION:
host_prot = SHOST_DIF_TYPE3_PROTECTION;
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE3_PROTECTION;
break;
default:
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE0_PROTECTION;
break;
}
scsi_host_set_prot(hpnt, host_prot);
printk(KERN_INFO "scsi_debug: host protection%s%s%s%s%s%s%s\n",
(host_prot & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "",
(host_prot & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "",
(host_prot & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "",
(host_prot & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "",
(host_prot & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "",
(host_prot & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "",
(host_prot & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : "");
if (scsi_debug_guard == 1)
scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_IP);
else
scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_CRC);
error = scsi_add_host(hpnt, &sdbg_host->dev);
if (error) {
printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
error = -ENODEV;
scsi_host_put(hpnt);
} else
scsi_scan_host(hpnt);
return error;
}
static int sdebug_driver_remove(struct device * dev)
{
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *sdbg_devinfo, *tmp;
sdbg_host = to_sdebug_host(dev);
if (!sdbg_host) {
printk(KERN_ERR "%s: Unable to locate host info\n",
__func__);
return -ENODEV;
}
scsi_remove_host(sdbg_host->shost);
list_for_each_entry_safe(sdbg_devinfo, tmp, &sdbg_host->dev_info_list,
dev_list) {
list_del(&sdbg_devinfo->dev_list);
kfree(sdbg_devinfo);
}
scsi_host_put(sdbg_host->shost);
return 0;
}
static int pseudo_lld_bus_match(struct device *dev,
struct device_driver *dev_driver)
{
return 1;
}
static struct bus_type pseudo_lld_bus = {
.name = "pseudo",
.match = pseudo_lld_bus_match,
.probe = sdebug_driver_probe,
.remove = sdebug_driver_remove,
};