openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/gpu/drm/msm/adreno/a5xx_gpu.c

1044 lines
31 KiB
C
Raw Normal View History

drm/msm: Fix wrong pointer check in a5xx_destroy Instead of checking for a5xx_gpu->gpmu_iova during destroy we accidently check a5xx_gpu->gpmu_bo. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:27 +08:00
/* Copyright (c) 2016-2017 The Linux Foundation. All rights reserved.
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
#include <linux/types.h>
#include <linux/cpumask.h>
#include <linux/qcom_scm.h>
#include <linux/dma-mapping.h>
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-27 03:59:21 +08:00
#include <linux/of_address.h>
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
#include <linux/soc/qcom/mdt_loader.h>
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
#include "msm_gem.h"
drm/msm: let gpu wire up it's own fault handler Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-12-08 00:13:53 +08:00
#include "msm_mmu.h"
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
#include "a5xx_gpu.h"
extern bool hang_debug;
static void a5xx_dump(struct msm_gpu *gpu);
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
#define GPU_PAS_ID 13
static int zap_shader_load_mdt(struct device *dev, const char *fwname)
{
const struct firmware *fw;
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-27 03:59:21 +08:00
struct device_node *np;
struct resource r;
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
phys_addr_t mem_phys;
ssize_t mem_size;
void *mem_region = NULL;
int ret;
drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM When compile-testing for something other than ARCH_QCOM, we run into a link error: drivers/gpu/drm/msm/adreno/a5xx_gpu.o: In function `a5xx_hw_init': a5xx_gpu.c:(.text.a5xx_hw_init+0x600): undefined reference to `qcom_mdt_get_size' a5xx_gpu.c:(.text.a5xx_hw_init+0x93c): undefined reference to `qcom_mdt_load' There is already an #ifdef that tries to check for CONFIG_QCOM_MDT_LOADER, but that symbol is only meaningful when building for ARCH_QCOM. This adds a compile-time check for ARCH_QCOM, and clarifies the Kconfig select statement so we don't even try it for other targets. The check for CONFIG_QCOM_MDT_LOADER can then go away, which also improves compile-time coverage and makes the code a little nicer to read. Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-26 23:52:44 +08:00
if (!IS_ENABLED(CONFIG_ARCH_QCOM))
return -EINVAL;
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-27 03:59:21 +08:00
np = of_get_child_by_name(dev->of_node, "zap-shader");
if (!np)
return -ENODEV;
np = of_parse_phandle(np, "memory-region", 0);
if (!np)
return -EINVAL;
ret = of_address_to_resource(np, 0, &r);
if (ret)
return ret;
mem_phys = r.start;
mem_size = resource_size(&r);
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
/* Request the MDT file for the firmware */
ret = request_firmware(&fw, fwname, dev);
if (ret) {
DRM_DEV_ERROR(dev, "Unable to load %s\n", fwname);
return ret;
}
/* Figure out how much memory we need */
mem_size = qcom_mdt_get_size(fw);
if (mem_size < 0) {
ret = mem_size;
goto out;
}
/* Allocate memory for the firmware image */
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-27 03:59:21 +08:00
mem_region = memremap(mem_phys, mem_size, MEMREMAP_WC);
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
if (!mem_region) {
ret = -ENOMEM;
goto out;
}
/* Load the rest of the MDT */
ret = qcom_mdt_load(dev, fw, fwname, GPU_PAS_ID, mem_region, mem_phys,
mem_size);
if (ret)
goto out;
/* Send the image to the secure world */
ret = qcom_scm_pas_auth_and_reset(GPU_PAS_ID);
if (ret)
DRM_DEV_ERROR(dev, "Unable to authorize the image\n");
out:
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-27 03:59:21 +08:00
if (mem_region)
memunmap(mem_region);
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
release_firmware(fw);
return ret;
}
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
static void a5xx_submit(struct msm_gpu *gpu, struct msm_gem_submit *submit,
struct msm_file_private *ctx)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
struct msm_drm_private *priv = gpu->dev->dev_private;
struct msm_ringbuffer *ring = gpu->rb;
unsigned int i, ibs = 0;
for (i = 0; i < submit->nr_cmds; i++) {
switch (submit->cmd[i].type) {
case MSM_SUBMIT_CMD_IB_TARGET_BUF:
break;
case MSM_SUBMIT_CMD_CTX_RESTORE_BUF:
if (priv->lastctx == ctx)
break;
case MSM_SUBMIT_CMD_BUF:
OUT_PKT7(ring, CP_INDIRECT_BUFFER_PFE, 3);
OUT_RING(ring, lower_32_bits(submit->cmd[i].iova));
OUT_RING(ring, upper_32_bits(submit->cmd[i].iova));
OUT_RING(ring, submit->cmd[i].size);
ibs++;
break;
}
}
OUT_PKT4(ring, REG_A5XX_CP_SCRATCH_REG(2), 1);
OUT_RING(ring, submit->fence->seqno);
OUT_PKT7(ring, CP_EVENT_WRITE, 4);
OUT_RING(ring, CACHE_FLUSH_TS | (1 << 31));
OUT_RING(ring, lower_32_bits(rbmemptr(adreno_gpu, fence)));
OUT_RING(ring, upper_32_bits(rbmemptr(adreno_gpu, fence)));
OUT_RING(ring, submit->fence->seqno);
gpu->funcs->flush(gpu);
}
drm/msm: Allow hardware clock gating to be toggled There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:31 +08:00
static const struct {
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
u32 offset;
u32 value;
drm/msm: Allow hardware clock gating to be toggled There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:31 +08:00
} a5xx_hwcg[] = {
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
{REG_A5XX_RBBM_CLOCK_CNTL_SP0, 0x02222222},
{REG_A5XX_RBBM_CLOCK_CNTL_SP1, 0x02222222},
{REG_A5XX_RBBM_CLOCK_CNTL_SP2, 0x02222222},
{REG_A5XX_RBBM_CLOCK_CNTL_SP3, 0x02222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_SP0, 0x02222220},
{REG_A5XX_RBBM_CLOCK_CNTL2_SP1, 0x02222220},
{REG_A5XX_RBBM_CLOCK_CNTL2_SP2, 0x02222220},
{REG_A5XX_RBBM_CLOCK_CNTL2_SP3, 0x02222220},
{REG_A5XX_RBBM_CLOCK_HYST_SP0, 0x0000F3CF},
{REG_A5XX_RBBM_CLOCK_HYST_SP1, 0x0000F3CF},
{REG_A5XX_RBBM_CLOCK_HYST_SP2, 0x0000F3CF},
{REG_A5XX_RBBM_CLOCK_HYST_SP3, 0x0000F3CF},
{REG_A5XX_RBBM_CLOCK_DELAY_SP0, 0x00000080},
{REG_A5XX_RBBM_CLOCK_DELAY_SP1, 0x00000080},
{REG_A5XX_RBBM_CLOCK_DELAY_SP2, 0x00000080},
{REG_A5XX_RBBM_CLOCK_DELAY_SP3, 0x00000080},
{REG_A5XX_RBBM_CLOCK_CNTL_TP0, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL_TP1, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL_TP2, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL_TP3, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_TP0, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_TP1, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_TP2, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_TP3, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL3_TP0, 0x00002222},
{REG_A5XX_RBBM_CLOCK_CNTL3_TP1, 0x00002222},
{REG_A5XX_RBBM_CLOCK_CNTL3_TP2, 0x00002222},
{REG_A5XX_RBBM_CLOCK_CNTL3_TP3, 0x00002222},
{REG_A5XX_RBBM_CLOCK_HYST_TP0, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST_TP1, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST_TP2, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST_TP3, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST2_TP0, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST2_TP1, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST2_TP2, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST2_TP3, 0x77777777},
{REG_A5XX_RBBM_CLOCK_HYST3_TP0, 0x00007777},
{REG_A5XX_RBBM_CLOCK_HYST3_TP1, 0x00007777},
{REG_A5XX_RBBM_CLOCK_HYST3_TP2, 0x00007777},
{REG_A5XX_RBBM_CLOCK_HYST3_TP3, 0x00007777},
{REG_A5XX_RBBM_CLOCK_DELAY_TP0, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY_TP1, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY_TP2, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY_TP3, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY2_TP0, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY2_TP1, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY2_TP2, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY2_TP3, 0x11111111},
{REG_A5XX_RBBM_CLOCK_DELAY3_TP0, 0x00001111},
{REG_A5XX_RBBM_CLOCK_DELAY3_TP1, 0x00001111},
{REG_A5XX_RBBM_CLOCK_DELAY3_TP2, 0x00001111},
{REG_A5XX_RBBM_CLOCK_DELAY3_TP3, 0x00001111},
{REG_A5XX_RBBM_CLOCK_CNTL_UCHE, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_UCHE, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL3_UCHE, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL4_UCHE, 0x00222222},
{REG_A5XX_RBBM_CLOCK_HYST_UCHE, 0x00444444},
{REG_A5XX_RBBM_CLOCK_DELAY_UCHE, 0x00000002},
{REG_A5XX_RBBM_CLOCK_CNTL_RB0, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL_RB1, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL_RB2, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL_RB3, 0x22222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_RB0, 0x00222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_RB1, 0x00222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_RB2, 0x00222222},
{REG_A5XX_RBBM_CLOCK_CNTL2_RB3, 0x00222222},
{REG_A5XX_RBBM_CLOCK_CNTL_CCU0, 0x00022220},
{REG_A5XX_RBBM_CLOCK_CNTL_CCU1, 0x00022220},
{REG_A5XX_RBBM_CLOCK_CNTL_CCU2, 0x00022220},
{REG_A5XX_RBBM_CLOCK_CNTL_CCU3, 0x00022220},
{REG_A5XX_RBBM_CLOCK_CNTL_RAC, 0x05522222},
{REG_A5XX_RBBM_CLOCK_CNTL2_RAC, 0x00505555},
{REG_A5XX_RBBM_CLOCK_HYST_RB_CCU0, 0x04040404},
{REG_A5XX_RBBM_CLOCK_HYST_RB_CCU1, 0x04040404},
{REG_A5XX_RBBM_CLOCK_HYST_RB_CCU2, 0x04040404},
{REG_A5XX_RBBM_CLOCK_HYST_RB_CCU3, 0x04040404},
{REG_A5XX_RBBM_CLOCK_HYST_RAC, 0x07444044},
{REG_A5XX_RBBM_CLOCK_DELAY_RB_CCU_L1_0, 0x00000002},
{REG_A5XX_RBBM_CLOCK_DELAY_RB_CCU_L1_1, 0x00000002},
{REG_A5XX_RBBM_CLOCK_DELAY_RB_CCU_L1_2, 0x00000002},
{REG_A5XX_RBBM_CLOCK_DELAY_RB_CCU_L1_3, 0x00000002},
{REG_A5XX_RBBM_CLOCK_DELAY_RAC, 0x00010011},
{REG_A5XX_RBBM_CLOCK_CNTL_TSE_RAS_RBBM, 0x04222222},
{REG_A5XX_RBBM_CLOCK_MODE_GPC, 0x02222222},
{REG_A5XX_RBBM_CLOCK_MODE_VFD, 0x00002222},
{REG_A5XX_RBBM_CLOCK_HYST_TSE_RAS_RBBM, 0x00000000},
{REG_A5XX_RBBM_CLOCK_HYST_GPC, 0x04104004},
{REG_A5XX_RBBM_CLOCK_HYST_VFD, 0x00000000},
{REG_A5XX_RBBM_CLOCK_DELAY_HLSQ, 0x00000000},
{REG_A5XX_RBBM_CLOCK_DELAY_TSE_RAS_RBBM, 0x00004000},
{REG_A5XX_RBBM_CLOCK_DELAY_GPC, 0x00000200},
{REG_A5XX_RBBM_CLOCK_DELAY_VFD, 0x00002222}
};
drm/msm: Allow hardware clock gating to be toggled There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:31 +08:00
void a5xx_set_hwcg(struct msm_gpu *gpu, bool state)
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
{
unsigned int i;
drm/msm: Allow hardware clock gating to be toggled There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:31 +08:00
for (i = 0; i < ARRAY_SIZE(a5xx_hwcg); i++)
gpu_write(gpu, a5xx_hwcg[i].offset,
state ? a5xx_hwcg[i].value : 0);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
drm/msm: Allow hardware clock gating to be toggled There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:31 +08:00
gpu_write(gpu, REG_A5XX_RBBM_CLOCK_CNTL, state ? 0xAAA8AA00 : 0);
gpu_write(gpu, REG_A5XX_RBBM_ISDB_CNT, state ? 0x182 : 0x180);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
}
static int a5xx_me_init(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
struct msm_ringbuffer *ring = gpu->rb;
OUT_PKT7(ring, CP_ME_INIT, 8);
OUT_RING(ring, 0x0000002F);
/* Enable multiple hardware contexts */
OUT_RING(ring, 0x00000003);
/* Enable error detection */
OUT_RING(ring, 0x20000000);
/* Don't enable header dump */
OUT_RING(ring, 0x00000000);
OUT_RING(ring, 0x00000000);
/* Specify workarounds for various microcode issues */
if (adreno_is_a530(adreno_gpu)) {
/* Workaround for token end syncs
* Force a WFI after every direct-render 3D mode draw and every
* 2D mode 3 draw
*/
OUT_RING(ring, 0x0000000B);
} else {
/* No workarounds enabled */
OUT_RING(ring, 0x00000000);
}
OUT_RING(ring, 0x00000000);
OUT_RING(ring, 0x00000000);
gpu->funcs->flush(gpu);
drm/msm: Remove idle function hook There isn't any generic code that uses ->idle so remove it. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-09 04:35:00 +08:00
return a5xx_idle(gpu) ? 0 : -EINVAL;
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
}
static struct drm_gem_object *a5xx_ucode_load_bo(struct msm_gpu *gpu,
const struct firmware *fw, u64 *iova)
{
struct drm_gem_object *bo;
void *ptr;
drm/msm: Add a helper function for in-kernel buffer allocations Nearly all of the buffer allocations for kernel allocate an buffer object, virtual address and GPU iova at the same time. Make a helper function to handle the details. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [dropped msm_fbdev conversion to new helper, since it interferes with display-handover work, where we want to separate allocation and mapping] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:40 +08:00
ptr = msm_gem_kernel_new_locked(gpu->dev, fw->size - 4,
MSM_BO_UNCACHED | MSM_BO_GPU_READONLY, gpu->aspace, &bo, iova);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
drm/msm: Add a helper function for in-kernel buffer allocations Nearly all of the buffer allocations for kernel allocate an buffer object, virtual address and GPU iova at the same time. Make a helper function to handle the details. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> [dropped msm_fbdev conversion to new helper, since it interferes with display-handover work, where we want to separate allocation and mapping] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:40 +08:00
if (IS_ERR(ptr))
return ERR_CAST(ptr);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
memcpy(ptr, &fw->data[4], fw->size - 4);
drm/msm: Separate locking of buffer resources from struct_mutex Buffer object specific resources like pages, domains, sg list need not be protected with struct_mutex. They can be protected with a buffer object level lock. This simplifies locking and makes it easier to avoid potential recursive locking scenarios for SVM involving mmap_sem and struct_mutex. This also removes unnecessary serialization when creating buffer objects, and also between buffer object creation and GPU command submission. Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org> [robclark: squash in handling new locking for shrinker] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-14 06:52:54 +08:00
msm_gem_put_vaddr(bo);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
return bo;
}
static int a5xx_ucode_init(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu);
int ret;
if (!a5xx_gpu->pm4_bo) {
a5xx_gpu->pm4_bo = a5xx_ucode_load_bo(gpu, adreno_gpu->pm4,
&a5xx_gpu->pm4_iova);
if (IS_ERR(a5xx_gpu->pm4_bo)) {
ret = PTR_ERR(a5xx_gpu->pm4_bo);
a5xx_gpu->pm4_bo = NULL;
dev_err(gpu->dev->dev, "could not allocate PM4: %d\n",
ret);
return ret;
}
}
if (!a5xx_gpu->pfp_bo) {
a5xx_gpu->pfp_bo = a5xx_ucode_load_bo(gpu, adreno_gpu->pfp,
&a5xx_gpu->pfp_iova);
if (IS_ERR(a5xx_gpu->pfp_bo)) {
ret = PTR_ERR(a5xx_gpu->pfp_bo);
a5xx_gpu->pfp_bo = NULL;
dev_err(gpu->dev->dev, "could not allocate PFP: %d\n",
ret);
return ret;
}
}
gpu_write64(gpu, REG_A5XX_CP_ME_INSTR_BASE_LO,
REG_A5XX_CP_ME_INSTR_BASE_HI, a5xx_gpu->pm4_iova);
gpu_write64(gpu, REG_A5XX_CP_PFP_INSTR_BASE_LO,
REG_A5XX_CP_PFP_INSTR_BASE_HI, a5xx_gpu->pfp_iova);
return 0;
}
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
#define SCM_GPU_ZAP_SHADER_RESUME 0
static int a5xx_zap_shader_resume(struct msm_gpu *gpu)
{
int ret;
ret = qcom_scm_set_remote_state(SCM_GPU_ZAP_SHADER_RESUME, GPU_PAS_ID);
if (ret)
DRM_ERROR("%s: zap-shader resume failed: %d\n",
gpu->name, ret);
return ret;
}
static int a5xx_zap_shader_init(struct msm_gpu *gpu)
{
static bool loaded;
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
drm/msm: Remove uneeded platform dev members Commit eeb754746b14 ("drm/msm/gpu: use pm-runtime") adds a pointer for the GPU platform device to the msm_gpu struct so we can happily remove the same pointers from the individual GPU structs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:33 +08:00
struct platform_device *pdev = gpu->pdev;
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
int ret;
/*
* If the zap shader is already loaded into memory we just need to kick
* the remote processor to reinitialize it
*/
if (loaded)
return a5xx_zap_shader_resume(gpu);
/* We need SCM to be able to load the firmware */
if (!qcom_scm_is_available()) {
DRM_DEV_ERROR(&pdev->dev, "SCM is not available\n");
return -EPROBE_DEFER;
}
/* Each GPU has a target specific zap shader firmware name to use */
if (!adreno_gpu->info->zapfw) {
DRM_DEV_ERROR(&pdev->dev,
"Zap shader firmware file not specified for this target\n");
return -ENODEV;
}
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations In zap_shader_load_mdt(), we pass a pointer to a phys_addr_t into dmam_alloc_coherent, which the compiler warns about: drivers/gpu/drm/msm/adreno/a5xx_gpu.c: In function 'zap_shader_load_mdt': drivers/gpu/drm/msm/adreno/a5xx_gpu.c:54:50: error: passing argument 3 of 'dmam_alloc_coherent' from incompatible pointer type [-Werror=incompatible-pointer-types] The returned DMA address is later passed on to a function that takes a phys_addr_t, so it's clearly wrong to use the DMA mapping interface here: the memory may be uncached, or the address may be completely wrong if there is an IOMMU connected to the device. What the code actually wants to do is to get the physical address from the reserved-mem node. It goes through the dma-mapping interfaces for obscure reasons, and this apparently only works by chance, relying on specific bugs in the error handling of the arm64 dma-mapping implementation. The same problem existed in the "venus" media driver, which was now fixed by Stanimir Varbanov after long discussions. In order to make some progress here, I have now ported his approach over to the adreno driver. The patch is currently untested, and should get a good review, but it is now much simpler than the original, and it should be obvious what goes wrong if I made a mistake in the port. See also: a6e2d36bf6b7 ("media: venus: don't abuse dma_alloc for non-DMA allocations") Cc: Stanimir Varbanov <stanimir.varbanov@linaro.org> Fixes: 7c65817e6d38 ("drm/msm: gpu: Enable zap shader for A5XX") Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-and-Tested-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-27 03:59:21 +08:00
ret = zap_shader_load_mdt(&pdev->dev, adreno_gpu->info->zapfw);
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
loaded = !ret;
return ret;
}
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
#define A5XX_INT_MASK (A5XX_RBBM_INT_0_MASK_RBBM_AHB_ERROR | \
A5XX_RBBM_INT_0_MASK_RBBM_TRANSFER_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_ME_MS_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_PFP_MS_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_ETS_MS_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_ATB_ASYNC_OVERFLOW | \
A5XX_RBBM_INT_0_MASK_CP_HW_ERROR | \
drm/msm: Add A5XX hardware fault detection The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:36 +08:00
A5XX_RBBM_INT_0_MASK_MISC_HANG_DETECT | \
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
A5XX_RBBM_INT_0_MASK_CP_CACHE_FLUSH_TS | \
A5XX_RBBM_INT_0_MASK_UCHE_OOB_ACCESS | \
A5XX_RBBM_INT_0_MASK_GPMU_VOLTAGE_DROOP)
static int a5xx_hw_init(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
int ret;
gpu_write(gpu, REG_A5XX_VBIF_ROUND_ROBIN_QOS_ARB, 0x00000003);
/* Make all blocks contribute to the GPU BUSY perf counter */
gpu_write(gpu, REG_A5XX_RBBM_PERFCTR_GPU_BUSY_MASKED, 0xFFFFFFFF);
/* Enable RBBM error reporting bits */
gpu_write(gpu, REG_A5XX_RBBM_AHB_CNTL0, 0x00000001);
drm/msm: drop quirks binding This was never documented or used in upstream dtb. It is used by downstream bindings from android device kernels. But the quirks are a property of the gpu revision, and as such are redundant to be listed separately in dt. Instead, move the quirks to the device table. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-01-31 00:15:14 +08:00
if (adreno_gpu->info->quirks & ADRENO_QUIRK_FAULT_DETECT_MASK) {
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
/*
* Mask out the activity signals from RB1-3 to avoid false
* positives
*/
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL11,
0xF0000000);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL12,
0xFFFFFFFF);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL13,
0xFFFFFFFF);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL14,
0xFFFFFFFF);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL15,
0xFFFFFFFF);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL16,
0xFFFFFFFF);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL17,
0xFFFFFFFF);
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_MASK_CNTL18,
0xFFFFFFFF);
}
/* Enable fault detection */
gpu_write(gpu, REG_A5XX_RBBM_INTERFACE_HANG_INT_CNTL,
(1 << 30) | 0xFFFF);
/* Turn on performance counters */
gpu_write(gpu, REG_A5XX_RBBM_PERFCTR_CNTL, 0x01);
/* Increase VFD cache access so LRZ and other data gets evicted less */
gpu_write(gpu, REG_A5XX_UCHE_CACHE_WAYS, 0x02);
/* Disable L2 bypass in the UCHE */
gpu_write(gpu, REG_A5XX_UCHE_TRAP_BASE_LO, 0xFFFF0000);
gpu_write(gpu, REG_A5XX_UCHE_TRAP_BASE_HI, 0x0001FFFF);
gpu_write(gpu, REG_A5XX_UCHE_WRITE_THRU_BASE_LO, 0xFFFF0000);
gpu_write(gpu, REG_A5XX_UCHE_WRITE_THRU_BASE_HI, 0x0001FFFF);
/* Set the GMEM VA range (0 to gpu->gmem) */
gpu_write(gpu, REG_A5XX_UCHE_GMEM_RANGE_MIN_LO, 0x00100000);
gpu_write(gpu, REG_A5XX_UCHE_GMEM_RANGE_MIN_HI, 0x00000000);
gpu_write(gpu, REG_A5XX_UCHE_GMEM_RANGE_MAX_LO,
0x00100000 + adreno_gpu->gmem - 1);
gpu_write(gpu, REG_A5XX_UCHE_GMEM_RANGE_MAX_HI, 0x00000000);
gpu_write(gpu, REG_A5XX_CP_MEQ_THRESHOLDS, 0x40);
gpu_write(gpu, REG_A5XX_CP_MERCIU_SIZE, 0x40);
gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_2, 0x80000060);
gpu_write(gpu, REG_A5XX_CP_ROQ_THRESHOLDS_1, 0x40201B16);
gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL, (0x400 << 11 | 0x300 << 22));
drm/msm: drop quirks binding This was never documented or used in upstream dtb. It is used by downstream bindings from android device kernels. But the quirks are a property of the gpu revision, and as such are redundant to be listed separately in dt. Instead, move the quirks to the device table. Signed-off-by: Rob Clark <robdclark@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net>
2017-01-31 00:15:14 +08:00
if (adreno_gpu->info->quirks & ADRENO_QUIRK_TWO_PASS_USE_WFI)
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
gpu_rmw(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0, (1 << 8));
gpu_write(gpu, REG_A5XX_PC_DBG_ECO_CNTL, 0xc0200100);
/* Enable USE_RETENTION_FLOPS */
gpu_write(gpu, REG_A5XX_CP_CHICKEN_DBG, 0x02000000);
/* Enable ME/PFP split notification */
gpu_write(gpu, REG_A5XX_RBBM_AHB_CNTL1, 0xA6FFFFFF);
/* Enable HWCG */
drm/msm: Allow hardware clock gating to be toggled There are some use cases wherein we need to turn off hardware clock gating before reading certain registers. Modify the A5XX HWCG function to allow user to enable or disable clock gating at will. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:31 +08:00
a5xx_set_hwcg(gpu, true);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
gpu_write(gpu, REG_A5XX_RBBM_AHB_CNTL2, 0x0000003F);
/* Set the highest bank bit */
gpu_write(gpu, REG_A5XX_TPL1_MODE_CNTL, 2 << 7);
gpu_write(gpu, REG_A5XX_RB_MODE_CNTL, 2 << 1);
/* Protect registers from the CP */
gpu_write(gpu, REG_A5XX_CP_PROTECT_CNTL, 0x00000007);
/* RBBM */
gpu_write(gpu, REG_A5XX_CP_PROTECT(0), ADRENO_PROTECT_RW(0x04, 4));
gpu_write(gpu, REG_A5XX_CP_PROTECT(1), ADRENO_PROTECT_RW(0x08, 8));
gpu_write(gpu, REG_A5XX_CP_PROTECT(2), ADRENO_PROTECT_RW(0x10, 16));
gpu_write(gpu, REG_A5XX_CP_PROTECT(3), ADRENO_PROTECT_RW(0x20, 32));
gpu_write(gpu, REG_A5XX_CP_PROTECT(4), ADRENO_PROTECT_RW(0x40, 64));
gpu_write(gpu, REG_A5XX_CP_PROTECT(5), ADRENO_PROTECT_RW(0x80, 64));
/* Content protect */
gpu_write(gpu, REG_A5XX_CP_PROTECT(6),
ADRENO_PROTECT_RW(REG_A5XX_RBBM_SECVID_TSB_TRUSTED_BASE_LO,
16));
gpu_write(gpu, REG_A5XX_CP_PROTECT(7),
ADRENO_PROTECT_RW(REG_A5XX_RBBM_SECVID_TRUST_CNTL, 2));
/* CP */
gpu_write(gpu, REG_A5XX_CP_PROTECT(8), ADRENO_PROTECT_RW(0x800, 64));
gpu_write(gpu, REG_A5XX_CP_PROTECT(9), ADRENO_PROTECT_RW(0x840, 8));
gpu_write(gpu, REG_A5XX_CP_PROTECT(10), ADRENO_PROTECT_RW(0x880, 32));
gpu_write(gpu, REG_A5XX_CP_PROTECT(11), ADRENO_PROTECT_RW(0xAA0, 1));
/* RB */
gpu_write(gpu, REG_A5XX_CP_PROTECT(12), ADRENO_PROTECT_RW(0xCC0, 1));
gpu_write(gpu, REG_A5XX_CP_PROTECT(13), ADRENO_PROTECT_RW(0xCF0, 2));
/* VPC */
gpu_write(gpu, REG_A5XX_CP_PROTECT(14), ADRENO_PROTECT_RW(0xE68, 8));
gpu_write(gpu, REG_A5XX_CP_PROTECT(15), ADRENO_PROTECT_RW(0xE70, 4));
/* UCHE */
gpu_write(gpu, REG_A5XX_CP_PROTECT(16), ADRENO_PROTECT_RW(0xE80, 16));
if (adreno_is_a530(adreno_gpu))
gpu_write(gpu, REG_A5XX_CP_PROTECT(17),
ADRENO_PROTECT_RW(0x10000, 0x8000));
gpu_write(gpu, REG_A5XX_RBBM_SECVID_TSB_CNTL, 0);
/*
* Disable the trusted memory range - we don't actually supported secure
* memory rendering at this point in time and we don't want to block off
* part of the virtual memory space.
*/
gpu_write64(gpu, REG_A5XX_RBBM_SECVID_TSB_TRUSTED_BASE_LO,
REG_A5XX_RBBM_SECVID_TSB_TRUSTED_BASE_HI, 0x00000000);
gpu_write(gpu, REG_A5XX_RBBM_SECVID_TSB_TRUSTED_SIZE, 0x00000000);
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
/* Load the GPMU firmware before starting the HW init */
a5xx_gpmu_ucode_init(gpu);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
ret = adreno_hw_init(gpu);
if (ret)
return ret;
ret = a5xx_ucode_init(gpu);
if (ret)
return ret;
/* Disable the interrupts through the initial bringup stage */
gpu_write(gpu, REG_A5XX_RBBM_INT_0_MASK, A5XX_INT_MASK);
/* Clear ME_HALT to start the micro engine */
gpu_write(gpu, REG_A5XX_CP_PFP_ME_CNTL, 0);
ret = a5xx_me_init(gpu);
if (ret)
return ret;
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
ret = a5xx_power_init(gpu);
if (ret)
return ret;
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
/*
* Send a pipeline event stat to get misbehaving counters to start
* ticking correctly
*/
if (adreno_is_a530(adreno_gpu)) {
OUT_PKT7(gpu->rb, CP_EVENT_WRITE, 1);
OUT_RING(gpu->rb, 0x0F);
gpu->funcs->flush(gpu);
drm/msm: Remove idle function hook There isn't any generic code that uses ->idle so remove it. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-09 04:35:00 +08:00
if (!a5xx_idle(gpu))
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
return -EINVAL;
}
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
/*
* Try to load a zap shader into the secure world. If successful
* we can use the CP to switch out of secure mode. If not then we
* have no resource but to try to switch ourselves out manually. If we
* guessed wrong then access to the RBBM_SECVID_TRUST_CNTL register will
* be blocked and a permissions violation will soon follow.
*/
ret = a5xx_zap_shader_init(gpu);
if (!ret) {
OUT_PKT7(gpu->rb, CP_SET_SECURE_MODE, 1);
OUT_RING(gpu->rb, 0x00000000);
gpu->funcs->flush(gpu);
drm/msm: Remove idle function hook There isn't any generic code that uses ->idle so remove it. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-09 04:35:00 +08:00
if (!a5xx_idle(gpu))
drm/msm: gpu: Enable zap shader for A5XX The A5XX GPU powers on in "secure" mode. In secure mode the GPU can only render to buffers that are marked as secure and inaccessible to the kernel and user through a series of hardware protections. In practice secure mode is used to draw things like a UI on a secure video frame. In order to switch out of secure mode the GPU executes a special shader that clears out the GMEM and other sensitve registers and then writes a register. Because the kernel can't be trusted the shader binary is signed and verified and programmed by the secure world. To do this we need to read the MDT header and the segments from the firmware location and put them in memory and present them for approval. For targets without secure support there is an out: if the secure world doesn't support secure then there are no hardware protections and we can freely write the SECVID_TRUST register from the CPU. We don't have 100% confidence that we can query the secure capabilities at run time but we have enough calls that need to go right to give us some confidence that we're at least doing something useful. Of course if we guess wrong you trigger a permissions violation which usually ends up in a system crash but thats a problem that shows up immediately. [v2: use child device per Bjorn] [v3: use generic MDT loader per Bjorn] [v4: use managed dma functions and ifdefs for the MDT loader] [v5: Add depends for QCOM_MDT_LOADER] Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> [robclark: fix Kconfig to use select instead of depends + #if IS_ENABLED()] Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-17 22:45:29 +08:00
return -EINVAL;
} else {
/* Print a warning so if we die, we know why */
dev_warn_once(gpu->dev->dev,
"Zap shader not enabled - using SECVID_TRUST_CNTL instead\n");
gpu_write(gpu, REG_A5XX_RBBM_SECVID_TRUST_CNTL, 0x0);
}
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
return 0;
}
static void a5xx_recover(struct msm_gpu *gpu)
{
int i;
adreno_dump_info(gpu);
for (i = 0; i < 8; i++) {
printk("CP_SCRATCH_REG%d: %u\n", i,
gpu_read(gpu, REG_A5XX_CP_SCRATCH_REG(i)));
}
if (hang_debug)
a5xx_dump(gpu);
gpu_write(gpu, REG_A5XX_RBBM_SW_RESET_CMD, 1);
gpu_read(gpu, REG_A5XX_RBBM_SW_RESET_CMD);
gpu_write(gpu, REG_A5XX_RBBM_SW_RESET_CMD, 0);
adreno_recover(gpu);
}
static void a5xx_destroy(struct msm_gpu *gpu)
{
struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu);
struct a5xx_gpu *a5xx_gpu = to_a5xx_gpu(adreno_gpu);
DBG("%s", gpu->name);
if (a5xx_gpu->pm4_bo) {
if (a5xx_gpu->pm4_iova)
drm/msm: pass address-space to _get_iova() and friends No functional change, that will come later. But this will make it easier to deal with dynamically created address spaces (ie. per- process pagetables for gpu). Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-13 23:07:08 +08:00
msm_gem_put_iova(a5xx_gpu->pm4_bo, gpu->aspace);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
drm_gem_object_unreference_unlocked(a5xx_gpu->pm4_bo);
}
if (a5xx_gpu->pfp_bo) {
if (a5xx_gpu->pfp_iova)
drm/msm: pass address-space to _get_iova() and friends No functional change, that will come later. But this will make it easier to deal with dynamically created address spaces (ie. per- process pagetables for gpu). Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-13 23:07:08 +08:00
msm_gem_put_iova(a5xx_gpu->pfp_bo, gpu->aspace);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
drm_gem_object_unreference_unlocked(a5xx_gpu->pfp_bo);
}
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
if (a5xx_gpu->gpmu_bo) {
drm/msm: Fix wrong pointer check in a5xx_destroy Instead of checking for a5xx_gpu->gpmu_iova during destroy we accidently check a5xx_gpu->gpmu_bo. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:27 +08:00
if (a5xx_gpu->gpmu_iova)
drm/msm: pass address-space to _get_iova() and friends No functional change, that will come later. But this will make it easier to deal with dynamically created address spaces (ie. per- process pagetables for gpu). Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-06-13 23:07:08 +08:00
msm_gem_put_iova(a5xx_gpu->gpmu_bo, gpu->aspace);
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
drm_gem_object_unreference_unlocked(a5xx_gpu->gpmu_bo);
}
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
adreno_gpu_cleanup(adreno_gpu);
kfree(a5xx_gpu);
}
static inline bool _a5xx_check_idle(struct msm_gpu *gpu)
{
if (gpu_read(gpu, REG_A5XX_RBBM_STATUS) & ~A5XX_RBBM_STATUS_HI_BUSY)
return false;
/*
* Nearly every abnormality ends up pausing the GPU and triggering a
* fault so we can safely just watch for this one interrupt to fire
*/
return !(gpu_read(gpu, REG_A5XX_RBBM_INT_0_STATUS) &
A5XX_RBBM_INT_0_MASK_MISC_HANG_DETECT);
}
drm/msm: Remove idle function hook There isn't any generic code that uses ->idle so remove it. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-05-09 04:35:00 +08:00
bool a5xx_idle(struct msm_gpu *gpu)
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
{
/* wait for CP to drain ringbuffer: */
if (!adreno_idle(gpu))
return false;
if (spin_until(_a5xx_check_idle(gpu))) {
DRM_ERROR("%s: %ps: timeout waiting for GPU to idle: status %8.8X irq %8.8X\n",
gpu->name, __builtin_return_address(0),
gpu_read(gpu, REG_A5XX_RBBM_STATUS),
gpu_read(gpu, REG_A5XX_RBBM_INT_0_STATUS));
return false;
}
return true;
}
drm/msm: let gpu wire up it's own fault handler Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-12-08 00:13:53 +08:00
static int a5xx_fault_handler(void *arg, unsigned long iova, int flags)
{
struct msm_gpu *gpu = arg;
pr_warn_ratelimited("*** gpu fault: iova=%08lx, flags=%d (%u,%u,%u,%u)\n",
iova, flags,
gpu_read(gpu, REG_A5XX_CP_SCRATCH_REG(4)),
gpu_read(gpu, REG_A5XX_CP_SCRATCH_REG(5)),
gpu_read(gpu, REG_A5XX_CP_SCRATCH_REG(6)),
gpu_read(gpu, REG_A5XX_CP_SCRATCH_REG(7)));
return -EFAULT;
}
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
static void a5xx_cp_err_irq(struct msm_gpu *gpu)
{
u32 status = gpu_read(gpu, REG_A5XX_CP_INTERRUPT_STATUS);
if (status & A5XX_CP_INT_CP_OPCODE_ERROR) {
u32 val;
gpu_write(gpu, REG_A5XX_CP_PFP_STAT_ADDR, 0);
/*
* REG_A5XX_CP_PFP_STAT_DATA is indexed, and we want index 1 so
* read it twice
*/
gpu_read(gpu, REG_A5XX_CP_PFP_STAT_DATA);
val = gpu_read(gpu, REG_A5XX_CP_PFP_STAT_DATA);
dev_err_ratelimited(gpu->dev->dev, "CP | opcode error | possible opcode=0x%8.8X\n",
val);
}
if (status & A5XX_CP_INT_CP_HW_FAULT_ERROR)
dev_err_ratelimited(gpu->dev->dev, "CP | HW fault | status=0x%8.8X\n",
gpu_read(gpu, REG_A5XX_CP_HW_FAULT));
if (status & A5XX_CP_INT_CP_DMA_ERROR)
dev_err_ratelimited(gpu->dev->dev, "CP | DMA error\n");
if (status & A5XX_CP_INT_CP_REGISTER_PROTECTION_ERROR) {
u32 val = gpu_read(gpu, REG_A5XX_CP_PROTECT_STATUS);
dev_err_ratelimited(gpu->dev->dev,
"CP | protected mode error | %s | addr=0x%8.8X | status=0x%8.8X\n",
val & (1 << 24) ? "WRITE" : "READ",
(val & 0xFFFFF) >> 2, val);
}
if (status & A5XX_CP_INT_CP_AHB_ERROR) {
u32 status = gpu_read(gpu, REG_A5XX_CP_AHB_FAULT);
const char *access[16] = { "reserved", "reserved",
"timestamp lo", "timestamp hi", "pfp read", "pfp write",
"", "", "me read", "me write", "", "", "crashdump read",
"crashdump write" };
dev_err_ratelimited(gpu->dev->dev,
"CP | AHB error | addr=%X access=%s error=%d | status=0x%8.8X\n",
status & 0xFFFFF, access[(status >> 24) & 0xF],
(status & (1 << 31)), status);
}
}
drm/msm: Pass interrupt status to a5xx_rbbm_err_irq() The interrupt status was being cleared before processing the handlers. a5xx_rbbm_err_irq() was checking the interrupt status again, which would likely turn out bad because the interrupt status would be 0 (or at least different). Pass the original status to the function instead. Also, skip clearing RBBM_AHB_ERROR from the interrupt status. The interrupt will keep firing until the error source is cleared. Skip the clear to avoid a storm until the error is cleared in a5xx_rbbm_err_irq(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:29 +08:00
static void a5xx_rbbm_err_irq(struct msm_gpu *gpu, u32 status)
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
{
if (status & A5XX_RBBM_INT_0_MASK_RBBM_AHB_ERROR) {
u32 val = gpu_read(gpu, REG_A5XX_RBBM_AHB_ERROR_STATUS);
dev_err_ratelimited(gpu->dev->dev,
"RBBM | AHB bus error | %s | addr=0x%X | ports=0x%X:0x%X\n",
val & (1 << 28) ? "WRITE" : "READ",
(val & 0xFFFFF) >> 2, (val >> 20) & 0x3,
(val >> 24) & 0xF);
/* Clear the error */
gpu_write(gpu, REG_A5XX_RBBM_AHB_CMD, (1 << 4));
drm/msm: Pass interrupt status to a5xx_rbbm_err_irq() The interrupt status was being cleared before processing the handlers. a5xx_rbbm_err_irq() was checking the interrupt status again, which would likely turn out bad because the interrupt status would be 0 (or at least different). Pass the original status to the function instead. Also, skip clearing RBBM_AHB_ERROR from the interrupt status. The interrupt will keep firing until the error source is cleared. Skip the clear to avoid a storm until the error is cleared in a5xx_rbbm_err_irq(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:29 +08:00
/* Clear the interrupt */
gpu_write(gpu, REG_A5XX_RBBM_INT_CLEAR_CMD,
A5XX_RBBM_INT_0_MASK_RBBM_AHB_ERROR);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
}
if (status & A5XX_RBBM_INT_0_MASK_RBBM_TRANSFER_TIMEOUT)
dev_err_ratelimited(gpu->dev->dev, "RBBM | AHB transfer timeout\n");
if (status & A5XX_RBBM_INT_0_MASK_RBBM_ME_MS_TIMEOUT)
dev_err_ratelimited(gpu->dev->dev, "RBBM | ME master split | status=0x%X\n",
gpu_read(gpu, REG_A5XX_RBBM_AHB_ME_SPLIT_STATUS));
if (status & A5XX_RBBM_INT_0_MASK_RBBM_PFP_MS_TIMEOUT)
dev_err_ratelimited(gpu->dev->dev, "RBBM | PFP master split | status=0x%X\n",
gpu_read(gpu, REG_A5XX_RBBM_AHB_PFP_SPLIT_STATUS));
if (status & A5XX_RBBM_INT_0_MASK_RBBM_ETS_MS_TIMEOUT)
dev_err_ratelimited(gpu->dev->dev, "RBBM | ETS master split | status=0x%X\n",
gpu_read(gpu, REG_A5XX_RBBM_AHB_ETS_SPLIT_STATUS));
if (status & A5XX_RBBM_INT_0_MASK_RBBM_ATB_ASYNC_OVERFLOW)
dev_err_ratelimited(gpu->dev->dev, "RBBM | ATB ASYNC overflow\n");
if (status & A5XX_RBBM_INT_0_MASK_RBBM_ATB_BUS_OVERFLOW)
dev_err_ratelimited(gpu->dev->dev, "RBBM | ATB bus overflow\n");
}
static void a5xx_uche_err_irq(struct msm_gpu *gpu)
{
uint64_t addr = (uint64_t) gpu_read(gpu, REG_A5XX_UCHE_TRAP_LOG_HI);
addr |= gpu_read(gpu, REG_A5XX_UCHE_TRAP_LOG_LO);
dev_err_ratelimited(gpu->dev->dev, "UCHE | Out of bounds access | addr=0x%llX\n",
addr);
}
static void a5xx_gpmu_err_irq(struct msm_gpu *gpu)
{
dev_err_ratelimited(gpu->dev->dev, "GPMU | voltage droop\n");
}
drm/msm: Add A5XX hardware fault detection The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:36 +08:00
static void a5xx_fault_detect_irq(struct msm_gpu *gpu)
{
struct drm_device *dev = gpu->dev;
struct msm_drm_private *priv = dev->dev_private;
drm/msm: Attach the GPU MMU when it is created Currently the GPU MMU is attached in the adreno_gpu code but as more and more of the GPU initialization moves to the generic GPU path we have a need to map and use GPU memory earlier and earlier. There isn't any reason to defer attaching the MMU until later so attach it right after the address space is created so it can be used immediately. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:39 +08:00
dev_err(dev->dev, "gpu fault fence %x status %8.8X rb %4.4x/%4.4x ib1 %16.16llX/%4.4x ib2 %16.16llX/%4.4x\n",
gpu->funcs->last_fence(gpu),
drm/msm: Add A5XX hardware fault detection The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:36 +08:00
gpu_read(gpu, REG_A5XX_RBBM_STATUS),
gpu_read(gpu, REG_A5XX_CP_RB_RPTR),
gpu_read(gpu, REG_A5XX_CP_RB_WPTR),
gpu_read64(gpu, REG_A5XX_CP_IB1_BASE, REG_A5XX_CP_IB1_BASE_HI),
gpu_read(gpu, REG_A5XX_CP_IB1_BUFSZ),
gpu_read64(gpu, REG_A5XX_CP_IB2_BASE, REG_A5XX_CP_IB2_BASE_HI),
gpu_read(gpu, REG_A5XX_CP_IB2_BUFSZ));
/* Turn off the hangcheck timer to keep it from bothering us */
del_timer(&gpu->hangcheck_timer);
queue_work(priv->wq, &gpu->recover_work);
}
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
#define RBBM_ERROR_MASK \
(A5XX_RBBM_INT_0_MASK_RBBM_AHB_ERROR | \
A5XX_RBBM_INT_0_MASK_RBBM_TRANSFER_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_ME_MS_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_PFP_MS_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_ETS_MS_TIMEOUT | \
A5XX_RBBM_INT_0_MASK_RBBM_ATB_ASYNC_OVERFLOW)
static irqreturn_t a5xx_irq(struct msm_gpu *gpu)
{
u32 status = gpu_read(gpu, REG_A5XX_RBBM_INT_0_STATUS);
drm/msm: Pass interrupt status to a5xx_rbbm_err_irq() The interrupt status was being cleared before processing the handlers. a5xx_rbbm_err_irq() was checking the interrupt status again, which would likely turn out bad because the interrupt status would be 0 (or at least different). Pass the original status to the function instead. Also, skip clearing RBBM_AHB_ERROR from the interrupt status. The interrupt will keep firing until the error source is cleared. Skip the clear to avoid a storm until the error is cleared in a5xx_rbbm_err_irq(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:29 +08:00
/*
* Clear all the interrupts except RBBM_AHB_ERROR - if we clear it
* before the source is cleared the interrupt will storm.
*/
gpu_write(gpu, REG_A5XX_RBBM_INT_CLEAR_CMD,
status & ~A5XX_RBBM_INT_0_MASK_RBBM_AHB_ERROR);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
drm/msm: Pass interrupt status to a5xx_rbbm_err_irq() The interrupt status was being cleared before processing the handlers. a5xx_rbbm_err_irq() was checking the interrupt status again, which would likely turn out bad because the interrupt status would be 0 (or at least different). Pass the original status to the function instead. Also, skip clearing RBBM_AHB_ERROR from the interrupt status. The interrupt will keep firing until the error source is cleared. Skip the clear to avoid a storm until the error is cleared in a5xx_rbbm_err_irq(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:29 +08:00
/* Pass status to a5xx_rbbm_err_irq because we've already cleared it */
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
if (status & RBBM_ERROR_MASK)
drm/msm: Pass interrupt status to a5xx_rbbm_err_irq() The interrupt status was being cleared before processing the handlers. a5xx_rbbm_err_irq() was checking the interrupt status again, which would likely turn out bad because the interrupt status would be 0 (or at least different). Pass the original status to the function instead. Also, skip clearing RBBM_AHB_ERROR from the interrupt status. The interrupt will keep firing until the error source is cleared. Skip the clear to avoid a storm until the error is cleared in a5xx_rbbm_err_irq(). Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-08 00:50:29 +08:00
a5xx_rbbm_err_irq(gpu, status);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
if (status & A5XX_RBBM_INT_0_MASK_CP_HW_ERROR)
a5xx_cp_err_irq(gpu);
drm/msm: Add A5XX hardware fault detection The A5XX GPU has really good hardware fault detection that can detect a abnormal hardware condition and fire an interrupt in a matter of milliseconds which is a lot better than waiting for the hangcheck timer. Enable the interrupt and log information before kicking off recovery. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:36 +08:00
if (status & A5XX_RBBM_INT_0_MASK_MISC_HANG_DETECT)
a5xx_fault_detect_irq(gpu);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
if (status & A5XX_RBBM_INT_0_MASK_UCHE_OOB_ACCESS)
a5xx_uche_err_irq(gpu);
if (status & A5XX_RBBM_INT_0_MASK_GPMU_VOLTAGE_DROOP)
a5xx_gpmu_err_irq(gpu);
if (status & A5XX_RBBM_INT_0_MASK_CP_CACHE_FLUSH_TS)
msm_gpu_retire(gpu);
return IRQ_HANDLED;
}
static const u32 a5xx_register_offsets[REG_ADRENO_REGISTER_MAX] = {
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_BASE, REG_A5XX_CP_RB_BASE),
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_BASE_HI, REG_A5XX_CP_RB_BASE_HI),
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_RPTR_ADDR, REG_A5XX_CP_RB_RPTR_ADDR),
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_RPTR_ADDR_HI,
REG_A5XX_CP_RB_RPTR_ADDR_HI),
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_RPTR, REG_A5XX_CP_RB_RPTR),
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_WPTR, REG_A5XX_CP_RB_WPTR),
REG_ADRENO_DEFINE(REG_ADRENO_CP_RB_CNTL, REG_A5XX_CP_RB_CNTL),
};
static const u32 a5xx_registers[] = {
0x0000, 0x0002, 0x0004, 0x0020, 0x0022, 0x0026, 0x0029, 0x002B,
0x002E, 0x0035, 0x0038, 0x0042, 0x0044, 0x0044, 0x0047, 0x0095,
0x0097, 0x00BB, 0x03A0, 0x0464, 0x0469, 0x046F, 0x04D2, 0x04D3,
drm/msm: Remove some potentially blocked register ranges The 0xf400 and 0xf800 ranges are in the RBBM_SECVID block which may be protected from CPU access. Skip dumping them since they are minimally useful for debugging and they aren't worth a system hang. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:30 +08:00
0x04E0, 0x0533, 0x0540, 0x0555, 0x0800, 0x081A, 0x081F, 0x0841,
0x0860, 0x0860, 0x0880, 0x08A0, 0x0B00, 0x0B12, 0x0B15, 0x0B28,
0x0B78, 0x0B7F, 0x0BB0, 0x0BBD, 0x0BC0, 0x0BC6, 0x0BD0, 0x0C53,
0x0C60, 0x0C61, 0x0C80, 0x0C82, 0x0C84, 0x0C85, 0x0C90, 0x0C98,
0x0CA0, 0x0CA0, 0x0CB0, 0x0CB2, 0x2180, 0x2185, 0x2580, 0x2585,
0x0CC1, 0x0CC1, 0x0CC4, 0x0CC7, 0x0CCC, 0x0CCC, 0x0CD0, 0x0CD8,
0x0CE0, 0x0CE5, 0x0CE8, 0x0CE8, 0x0CEC, 0x0CF1, 0x0CFB, 0x0D0E,
0x2100, 0x211E, 0x2140, 0x2145, 0x2500, 0x251E, 0x2540, 0x2545,
0x0D10, 0x0D17, 0x0D20, 0x0D23, 0x0D30, 0x0D30, 0x20C0, 0x20C0,
0x24C0, 0x24C0, 0x0E40, 0x0E43, 0x0E4A, 0x0E4A, 0x0E50, 0x0E57,
0x0E60, 0x0E7C, 0x0E80, 0x0E8E, 0x0E90, 0x0E96, 0x0EA0, 0x0EA8,
0x0EB0, 0x0EB2, 0xE140, 0xE147, 0xE150, 0xE187, 0xE1A0, 0xE1A9,
0xE1B0, 0xE1B6, 0xE1C0, 0xE1C7, 0xE1D0, 0xE1D1, 0xE200, 0xE201,
0xE210, 0xE21C, 0xE240, 0xE268, 0xE000, 0xE006, 0xE010, 0xE09A,
0xE0A0, 0xE0A4, 0xE0AA, 0xE0EB, 0xE100, 0xE105, 0xE380, 0xE38F,
0xE3B0, 0xE3B0, 0xE400, 0xE405, 0xE408, 0xE4E9, 0xE4F0, 0xE4F0,
0xE280, 0xE280, 0xE282, 0xE2A3, 0xE2A5, 0xE2C2, 0xE940, 0xE947,
0xE950, 0xE987, 0xE9A0, 0xE9A9, 0xE9B0, 0xE9B6, 0xE9C0, 0xE9C7,
0xE9D0, 0xE9D1, 0xEA00, 0xEA01, 0xEA10, 0xEA1C, 0xEA40, 0xEA68,
0xE800, 0xE806, 0xE810, 0xE89A, 0xE8A0, 0xE8A4, 0xE8AA, 0xE8EB,
0xE900, 0xE905, 0xEB80, 0xEB8F, 0xEBB0, 0xEBB0, 0xEC00, 0xEC05,
0xEC08, 0xECE9, 0xECF0, 0xECF0, 0xEA80, 0xEA80, 0xEA82, 0xEAA3,
0xEAA5, 0xEAC2, 0xA800, 0xA8FF, 0xAC60, 0xAC60, 0xB000, 0xB97F,
0xB9A0, 0xB9BF, ~0
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
};
static void a5xx_dump(struct msm_gpu *gpu)
{
dev_info(gpu->dev->dev, "status: %08x\n",
gpu_read(gpu, REG_A5XX_RBBM_STATUS));
adreno_dump(gpu);
}
static int a5xx_pm_resume(struct msm_gpu *gpu)
{
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
int ret;
/* Turn on the core power */
ret = msm_gpu_pm_resume(gpu);
if (ret)
return ret;
/* Turn the RBCCU domain first to limit the chances of voltage droop */
gpu_write(gpu, REG_A5XX_GPMU_RBCCU_POWER_CNTL, 0x778000);
/* Wait 3 usecs before polling */
udelay(3);
ret = spin_usecs(gpu, 20, REG_A5XX_GPMU_RBCCU_PWR_CLK_STATUS,
(1 << 20), (1 << 20));
if (ret) {
DRM_ERROR("%s: timeout waiting for RBCCU GDSC enable: %X\n",
gpu->name,
gpu_read(gpu, REG_A5XX_GPMU_RBCCU_PWR_CLK_STATUS));
return ret;
}
/* Turn on the SP domain */
gpu_write(gpu, REG_A5XX_GPMU_SP_POWER_CNTL, 0x778000);
ret = spin_usecs(gpu, 20, REG_A5XX_GPMU_SP_PWR_CLK_STATUS,
(1 << 20), (1 << 20));
if (ret)
DRM_ERROR("%s: timeout waiting for SP GDSC enable\n",
gpu->name);
return ret;
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
}
static int a5xx_pm_suspend(struct msm_gpu *gpu)
{
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
/* Clear the VBIF pipe before shutting down */
gpu_write(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL0, 0xF);
spin_until((gpu_read(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL1) & 0xF) == 0xF);
gpu_write(gpu, REG_A5XX_VBIF_XIN_HALT_CTRL0, 0);
/*
* Reset the VBIF before power collapse to avoid issue with FIFO
* entries
*/
gpu_write(gpu, REG_A5XX_RBBM_BLOCK_SW_RESET_CMD, 0x003C0000);
gpu_write(gpu, REG_A5XX_RBBM_BLOCK_SW_RESET_CMD, 0x00000000);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
return msm_gpu_pm_suspend(gpu);
}
static int a5xx_get_timestamp(struct msm_gpu *gpu, uint64_t *value)
{
*value = gpu_read64(gpu, REG_A5XX_RBBM_PERFCTR_CP_0_LO,
REG_A5XX_RBBM_PERFCTR_CP_0_HI);
return 0;
}
#ifdef CONFIG_DEBUG_FS
static void a5xx_show(struct msm_gpu *gpu, struct seq_file *m)
{
seq_printf(m, "status: %08x\n",
gpu_read(gpu, REG_A5XX_RBBM_STATUS));
drm/msm: Turn off hardware clock gating before reading A5XX registers On A5XX GPU hardware clock gating needs to be turned off before reading certain GPU registers via AHB. Turn off HWCG before calling adreno_show() to safely dump all the registers without a system hang. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:32 +08:00
/*
* Temporarily disable hardware clock gating before going into
* adreno_show to avoid issues while reading the registers
*/
a5xx_set_hwcg(gpu, false);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
adreno_show(gpu, m);
drm/msm: Turn off hardware clock gating before reading A5XX registers On A5XX GPU hardware clock gating needs to be turned off before reading certain GPU registers via AHB. Turn off HWCG before calling adreno_show() to safely dump all the registers without a system hang. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-07-28 00:42:32 +08:00
a5xx_set_hwcg(gpu, true);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
}
#endif
static const struct adreno_gpu_funcs funcs = {
.base = {
.get_param = adreno_get_param,
.hw_init = a5xx_hw_init,
.pm_suspend = a5xx_pm_suspend,
.pm_resume = a5xx_pm_resume,
.recover = a5xx_recover,
.last_fence = adreno_last_fence,
.submit = a5xx_submit,
.flush = adreno_flush,
.irq = a5xx_irq,
.destroy = a5xx_destroy,
drm/msm: adreno: fix build error without debugfs The newly added a5xx support fails to build when debugfs is diabled: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show' drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'? This adds a missing #ifdef. Fixes: b5f103ab98c7 ("drm/msm: gpu: Add A5XX target support") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-14 00:43:48 +08:00
#ifdef CONFIG_DEBUG_FS
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
.show = a5xx_show,
drm/msm: adreno: fix build error without debugfs The newly added a5xx support fails to build when debugfs is diabled: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:4: error: 'struct msm_gpu_funcs' has no member named 'show' drivers/gpu/drm/msm/adreno/a5xx_gpu.c:849:11: error: 'a5xx_show' undeclared here (not in a function); did you mean 'a5xx_irq'? This adds a missing #ifdef. Fixes: b5f103ab98c7 ("drm/msm: gpu: Add A5XX target support") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2017-03-14 00:43:48 +08:00
#endif
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
},
.get_timestamp = a5xx_get_timestamp,
};
struct msm_gpu *a5xx_gpu_init(struct drm_device *dev)
{
struct msm_drm_private *priv = dev->dev_private;
struct platform_device *pdev = priv->gpu_pdev;
struct a5xx_gpu *a5xx_gpu = NULL;
struct adreno_gpu *adreno_gpu;
struct msm_gpu *gpu;
int ret;
if (!pdev) {
dev_err(dev->dev, "No A5XX device is defined\n");
return ERR_PTR(-ENXIO);
}
a5xx_gpu = kzalloc(sizeof(*a5xx_gpu), GFP_KERNEL);
if (!a5xx_gpu)
return ERR_PTR(-ENOMEM);
adreno_gpu = &a5xx_gpu->base;
gpu = &adreno_gpu->base;
adreno_gpu->registers = a5xx_registers;
adreno_gpu->reg_offsets = a5xx_register_offsets;
drm/msm: gpu: Add support for the GPMU Most 5XX targets have GPMU (Graphics Power Management Unit) that handles a lot of the heavy lifting for power management including thermal and limits management and dynamic power collapse. While the GPMU itself is optional, it is usually nessesary to hit aggressive power targets. The GPMU firmware needs to be loaded into the GPMU at init time via a shared hardware block of registers. Using the GPU to write the microcode is more efficient than using the CPU so at first load create an indirect buffer that can be executed during subsequent initalization sequences. After loading the GPMU gets initalized through a shared register interface and then we mostly get out of its way and let it do its thing. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:34 +08:00
a5xx_gpu->lm_leakage = 0x4E001A;
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs);
if (ret) {
a5xx_destroy(&(a5xx_gpu->base.base));
return ERR_PTR(ret);
}
drm/msm: let gpu wire up it's own fault handler Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-12-08 00:13:53 +08:00
if (gpu->aspace)
msm_mmu_set_fault_handler(gpu->aspace->mmu, gpu, a5xx_fault_handler);
drm/msm: gpu: Add A5XX target support Add support for the A5XX family of Adreno GPUs. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2016-11-29 03:28:33 +08:00
return gpu;
}