linux/tools/perf/util/stat-shadow.c

1010 lines
28 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <stdio.h>
#include "evsel.h"
#include "stat.h"
#include "color.h"
#include "pmu.h"
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
#include "rblist.h"
#include "evlist.h"
#include "expr.h"
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
#include "metricgroup.h"
perf stat: Support metrics in --per-core/socket mode Enable metrics printing in --per-core / --per-socket mode. We need to save the shadow metrics in a unique place. Always use the first CPU in the aggregation. Then use the same CPU to retrieve the shadow value later. Example output: % perf stat --per-core -a ./BC1s Performance counter stats for 'system wide': S0-C0 2 2966.020381 task-clock (msec) # 2.004 CPUs utilized (100.00%) S0-C0 2 49 context-switches # 0.017 K/sec (100.00%) S0-C0 2 4 cpu-migrations # 0.001 K/sec (100.00%) S0-C0 2 467 page-faults # 0.157 K/sec S0-C0 2 4,599,061,773 cycles # 1.551 GHz (100.00%) S0-C0 2 9,755,886,883 instructions # 2.12 insn per cycle (100.00%) S0-C0 2 1,906,272,125 branches # 642.704 M/sec (100.00%) S0-C0 2 81,180,867 branch-misses # 4.26% of all branches S0-C1 2 2965.995373 task-clock (msec) # 2.003 CPUs utilized (100.00%) S0-C1 2 62 context-switches # 0.021 K/sec (100.00%) S0-C1 2 8 cpu-migrations # 0.003 K/sec (100.00%) S0-C1 2 281 page-faults # 0.095 K/sec S0-C1 2 6,347,290 cycles # 0.002 GHz (100.00%) S0-C1 2 4,654,156 instructions # 0.73 insn per cycle (100.00%) S0-C1 2 947,121 branches # 0.319 M/sec (100.00%) S0-C1 2 37,322 branch-misses # 3.94% of all branches 1.480409747 seconds time elapsed v2: Rebase to older patches v3: Document shadow cpus. Fix aggr_get_id argument. Fix -A shadows (Jiri) Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/1456785386-19481-4-git-send-email-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-03-01 06:36:22 +08:00
/*
* AGGR_GLOBAL: Use CPU 0
* AGGR_SOCKET: Use first CPU of socket
* AGGR_CORE: Use first CPU of core
* AGGR_NONE: Use matching CPU
* AGGR_THREAD: Not supported?
*/
static bool have_frontend_stalled;
struct runtime_stat rt_stat;
struct stats walltime_nsecs_stats;
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
struct saved_value {
struct rb_node rb_node;
struct perf_evsel *evsel;
enum stat_type type;
int ctx;
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
int cpu;
struct runtime_stat *stat;
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
struct stats stats;
};
static int saved_value_cmp(struct rb_node *rb_node, const void *entry)
{
struct saved_value *a = container_of(rb_node,
struct saved_value,
rb_node);
const struct saved_value *b = entry;
if (a->cpu != b->cpu)
return a->cpu - b->cpu;
/*
* Previously the rbtree was used to link generic metrics.
* The keys were evsel/cpu. Now the rbtree is extended to support
* per-thread shadow stats. For shadow stats case, the keys
* are cpu/type/ctx/stat (evsel is NULL). For generic metrics
* case, the keys are still evsel/cpu (type/ctx/stat are 0 or NULL).
*/
if (a->type != b->type)
return a->type - b->type;
if (a->ctx != b->ctx)
return a->ctx - b->ctx;
if (a->evsel == NULL && b->evsel == NULL) {
if (a->stat == b->stat)
return 0;
if ((char *)a->stat < (char *)b->stat)
return -1;
return 1;
}
if (a->evsel == b->evsel)
return 0;
if ((char *)a->evsel < (char *)b->evsel)
return -1;
return +1;
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
}
static struct rb_node *saved_value_new(struct rblist *rblist __maybe_unused,
const void *entry)
{
struct saved_value *nd = malloc(sizeof(struct saved_value));
if (!nd)
return NULL;
memcpy(nd, entry, sizeof(struct saved_value));
return &nd->rb_node;
}
static void saved_value_delete(struct rblist *rblist __maybe_unused,
struct rb_node *rb_node)
{
struct saved_value *v;
BUG_ON(!rb_node);
v = container_of(rb_node, struct saved_value, rb_node);
free(v);
}
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
static struct saved_value *saved_value_lookup(struct perf_evsel *evsel,
int cpu,
bool create,
enum stat_type type,
int ctx,
struct runtime_stat *st)
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
{
struct rblist *rblist;
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
struct rb_node *nd;
struct saved_value dm = {
.cpu = cpu,
.evsel = evsel,
.type = type,
.ctx = ctx,
.stat = st,
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
};
rblist = &st->value_list;
nd = rblist__find(rblist, &dm);
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
if (nd)
return container_of(nd, struct saved_value, rb_node);
if (create) {
rblist__add_node(rblist, &dm);
nd = rblist__find(rblist, &dm);
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
if (nd)
return container_of(nd, struct saved_value, rb_node);
}
return NULL;
}
void runtime_stat__init(struct runtime_stat *st)
{
struct rblist *rblist = &st->value_list;
rblist__init(rblist);
rblist->node_cmp = saved_value_cmp;
rblist->node_new = saved_value_new;
rblist->node_delete = saved_value_delete;
}
void runtime_stat__exit(struct runtime_stat *st)
{
rblist__exit(&st->value_list);
}
void perf_stat__init_shadow_stats(void)
{
have_frontend_stalled = pmu_have_event("cpu", "stalled-cycles-frontend");
runtime_stat__init(&rt_stat);
}
static int evsel_context(struct perf_evsel *evsel)
{
int ctx = 0;
if (evsel->attr.exclude_kernel)
ctx |= CTX_BIT_KERNEL;
if (evsel->attr.exclude_user)
ctx |= CTX_BIT_USER;
if (evsel->attr.exclude_hv)
ctx |= CTX_BIT_HV;
if (evsel->attr.exclude_host)
ctx |= CTX_BIT_HOST;
if (evsel->attr.exclude_idle)
ctx |= CTX_BIT_IDLE;
return ctx;
}
static void reset_stat(struct runtime_stat *st)
{
struct rblist *rblist;
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
struct rb_node *pos, *next;
rblist = &st->value_list;
next = rb_first_cached(&rblist->entries);
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
while (next) {
pos = next;
next = rb_next(pos);
memset(&container_of(pos, struct saved_value, rb_node)->stats,
0,
sizeof(struct stats));
}
}
void perf_stat__reset_shadow_stats(void)
{
reset_stat(&rt_stat);
memset(&walltime_nsecs_stats, 0, sizeof(walltime_nsecs_stats));
}
void perf_stat__reset_shadow_per_stat(struct runtime_stat *st)
{
reset_stat(st);
}
static void update_runtime_stat(struct runtime_stat *st,
enum stat_type type,
int ctx, int cpu, u64 count)
{
struct saved_value *v = saved_value_lookup(NULL, cpu, true,
type, ctx, st);
if (v)
update_stats(&v->stats, count);
}
/*
* Update various tracking values we maintain to print
* more semantic information such as miss/hit ratios,
* instruction rates, etc:
*/
void perf_stat__update_shadow_stats(struct perf_evsel *counter, u64 count,
int cpu, struct runtime_stat *st)
{
int ctx = evsel_context(counter);
u64 count_ns = count;
count *= counter->scale;
if (perf_evsel__is_clock(counter))
update_runtime_stat(st, STAT_NSECS, 0, cpu, count_ns);
else if (perf_evsel__match(counter, HARDWARE, HW_CPU_CYCLES))
update_runtime_stat(st, STAT_CYCLES, ctx, cpu, count);
else if (perf_stat_evsel__is(counter, CYCLES_IN_TX))
update_runtime_stat(st, STAT_CYCLES_IN_TX, ctx, cpu, count);
else if (perf_stat_evsel__is(counter, TRANSACTION_START))
update_runtime_stat(st, STAT_TRANSACTION, ctx, cpu, count);
else if (perf_stat_evsel__is(counter, ELISION_START))
update_runtime_stat(st, STAT_ELISION, ctx, cpu, count);
else if (perf_stat_evsel__is(counter, TOPDOWN_TOTAL_SLOTS))
update_runtime_stat(st, STAT_TOPDOWN_TOTAL_SLOTS,
ctx, cpu, count);
else if (perf_stat_evsel__is(counter, TOPDOWN_SLOTS_ISSUED))
update_runtime_stat(st, STAT_TOPDOWN_SLOTS_ISSUED,
ctx, cpu, count);
else if (perf_stat_evsel__is(counter, TOPDOWN_SLOTS_RETIRED))
update_runtime_stat(st, STAT_TOPDOWN_SLOTS_RETIRED,
ctx, cpu, count);
else if (perf_stat_evsel__is(counter, TOPDOWN_FETCH_BUBBLES))
update_runtime_stat(st, STAT_TOPDOWN_FETCH_BUBBLES,
ctx, cpu, count);
else if (perf_stat_evsel__is(counter, TOPDOWN_RECOVERY_BUBBLES))
update_runtime_stat(st, STAT_TOPDOWN_RECOVERY_BUBBLES,
ctx, cpu, count);
else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_FRONTEND))
update_runtime_stat(st, STAT_STALLED_CYCLES_FRONT,
ctx, cpu, count);
else if (perf_evsel__match(counter, HARDWARE, HW_STALLED_CYCLES_BACKEND))
update_runtime_stat(st, STAT_STALLED_CYCLES_BACK,
ctx, cpu, count);
else if (perf_evsel__match(counter, HARDWARE, HW_BRANCH_INSTRUCTIONS))
update_runtime_stat(st, STAT_BRANCHES, ctx, cpu, count);
else if (perf_evsel__match(counter, HARDWARE, HW_CACHE_REFERENCES))
update_runtime_stat(st, STAT_CACHEREFS, ctx, cpu, count);
else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1D))
update_runtime_stat(st, STAT_L1_DCACHE, ctx, cpu, count);
else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_L1I))
update_runtime_stat(st, STAT_L1_ICACHE, ctx, cpu, count);
else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_LL))
update_runtime_stat(st, STAT_LL_CACHE, ctx, cpu, count);
else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_DTLB))
update_runtime_stat(st, STAT_DTLB_CACHE, ctx, cpu, count);
else if (perf_evsel__match(counter, HW_CACHE, HW_CACHE_ITLB))
update_runtime_stat(st, STAT_ITLB_CACHE, ctx, cpu, count);
else if (perf_stat_evsel__is(counter, SMI_NUM))
update_runtime_stat(st, STAT_SMI_NUM, ctx, cpu, count);
else if (perf_stat_evsel__is(counter, APERF))
update_runtime_stat(st, STAT_APERF, ctx, cpu, count);
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
if (counter->collect_stat) {
struct saved_value *v = saved_value_lookup(counter, cpu, true,
STAT_NONE, 0, st);
update_stats(&v->stats, count);
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
}
}
/* used for get_ratio_color() */
enum grc_type {
GRC_STALLED_CYCLES_FE,
GRC_STALLED_CYCLES_BE,
GRC_CACHE_MISSES,
GRC_MAX_NR
};
static const char *get_ratio_color(enum grc_type type, double ratio)
{
static const double grc_table[GRC_MAX_NR][3] = {
[GRC_STALLED_CYCLES_FE] = { 50.0, 30.0, 10.0 },
[GRC_STALLED_CYCLES_BE] = { 75.0, 50.0, 20.0 },
[GRC_CACHE_MISSES] = { 20.0, 10.0, 5.0 },
};
const char *color = PERF_COLOR_NORMAL;
if (ratio > grc_table[type][0])
color = PERF_COLOR_RED;
else if (ratio > grc_table[type][1])
color = PERF_COLOR_MAGENTA;
else if (ratio > grc_table[type][2])
color = PERF_COLOR_YELLOW;
return color;
}
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
static struct perf_evsel *perf_stat__find_event(struct perf_evlist *evsel_list,
const char *name)
{
struct perf_evsel *c2;
evlist__for_each_entry (evsel_list, c2) {
if (!strcasecmp(c2->name, name))
return c2;
}
return NULL;
}
/* Mark MetricExpr target events and link events using them to them. */
void perf_stat__collect_metric_expr(struct perf_evlist *evsel_list)
{
struct perf_evsel *counter, *leader, **metric_events, *oc;
bool found;
const char **metric_names;
int i;
int num_metric_names;
evlist__for_each_entry(evsel_list, counter) {
bool invalid = false;
leader = counter->leader;
if (!counter->metric_expr)
continue;
metric_events = counter->metric_events;
if (!metric_events) {
if (expr__find_other(counter->metric_expr, counter->name,
&metric_names, &num_metric_names) < 0)
continue;
metric_events = calloc(sizeof(struct perf_evsel *),
num_metric_names + 1);
if (!metric_events)
return;
counter->metric_events = metric_events;
}
for (i = 0; i < num_metric_names; i++) {
found = false;
if (leader) {
/* Search in group */
for_each_group_member (oc, leader) {
if (!strcasecmp(oc->name, metric_names[i])) {
found = true;
break;
}
}
}
if (!found) {
/* Search ignoring groups */
oc = perf_stat__find_event(evsel_list, metric_names[i]);
}
if (!oc) {
/* Deduping one is good enough to handle duplicated PMUs. */
static char *printed;
/*
* Adding events automatically would be difficult, because
* it would risk creating groups that are not schedulable.
* perf stat doesn't understand all the scheduling constraints
* of events. So we ask the user instead to add the missing
* events.
*/
if (!printed || strcasecmp(printed, metric_names[i])) {
fprintf(stderr,
"Add %s event to groups to get metric expression for %s\n",
metric_names[i],
counter->name);
printed = strdup(metric_names[i]);
}
invalid = true;
continue;
}
metric_events[i] = oc;
oc->collect_stat = true;
}
metric_events[i] = NULL;
free(metric_names);
if (invalid) {
free(metric_events);
counter->metric_events = NULL;
counter->metric_expr = NULL;
}
}
}
static double runtime_stat_avg(struct runtime_stat *st,
enum stat_type type, int ctx, int cpu)
{
struct saved_value *v;
v = saved_value_lookup(NULL, cpu, false, type, ctx, st);
if (!v)
return 0.0;
return avg_stats(&v->stats);
}
static double runtime_stat_n(struct runtime_stat *st,
enum stat_type type, int ctx, int cpu)
{
struct saved_value *v;
v = saved_value_lookup(NULL, cpu, false, type, ctx, st);
if (!v)
return 0.0;
return v->stats.n;
}
static void print_stalled_cycles_frontend(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel, double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_CYCLES, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_STALLED_CYCLES_FE, ratio);
if (ratio)
out->print_metric(config, out->ctx, color, "%7.2f%%", "frontend cycles idle",
ratio);
else
out->print_metric(config, out->ctx, NULL, NULL, "frontend cycles idle", 0);
}
static void print_stalled_cycles_backend(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel, double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_CYCLES, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_STALLED_CYCLES_BE, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "backend cycles idle", ratio);
}
static void print_branch_misses(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel,
double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_BRANCHES, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_CACHE_MISSES, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "of all branches", ratio);
}
static void print_l1_dcache_misses(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel,
double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_L1_DCACHE, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_CACHE_MISSES, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "of all L1-dcache hits", ratio);
}
static void print_l1_icache_misses(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel,
double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_L1_ICACHE, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_CACHE_MISSES, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "of all L1-icache hits", ratio);
}
static void print_dtlb_cache_misses(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel,
double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_DTLB_CACHE, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_CACHE_MISSES, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "of all dTLB cache hits", ratio);
}
static void print_itlb_cache_misses(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel,
double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_ITLB_CACHE, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_CACHE_MISSES, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "of all iTLB cache hits", ratio);
}
static void print_ll_cache_misses(struct perf_stat_config *config,
int cpu,
struct perf_evsel *evsel,
double avg,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double total, ratio = 0.0;
const char *color;
int ctx = evsel_context(evsel);
total = runtime_stat_avg(st, STAT_LL_CACHE, ctx, cpu);
if (total)
ratio = avg / total * 100.0;
color = get_ratio_color(GRC_CACHE_MISSES, ratio);
out->print_metric(config, out->ctx, color, "%7.2f%%", "of all LL-cache hits", ratio);
}
/*
* High level "TopDown" CPU core pipe line bottleneck break down.
*
* Basic concept following
* Yasin, A Top Down Method for Performance analysis and Counter architecture
* ISPASS14
*
* The CPU pipeline is divided into 4 areas that can be bottlenecks:
*
* Frontend -> Backend -> Retiring
* BadSpeculation in addition means out of order execution that is thrown away
* (for example branch mispredictions)
* Frontend is instruction decoding.
* Backend is execution, like computation and accessing data in memory
* Retiring is good execution that is not directly bottlenecked
*
* The formulas are computed in slots.
* A slot is an entry in the pipeline each for the pipeline width
* (for example a 4-wide pipeline has 4 slots for each cycle)
*
* Formulas:
* BadSpeculation = ((SlotsIssued - SlotsRetired) + RecoveryBubbles) /
* TotalSlots
* Retiring = SlotsRetired / TotalSlots
* FrontendBound = FetchBubbles / TotalSlots
* BackendBound = 1.0 - BadSpeculation - Retiring - FrontendBound
*
* The kernel provides the mapping to the low level CPU events and any scaling
* needed for the CPU pipeline width, for example:
*
* TotalSlots = Cycles * 4
*
* The scaling factor is communicated in the sysfs unit.
*
* In some cases the CPU may not be able to measure all the formulas due to
* missing events. In this case multiple formulas are combined, as possible.
*
* Full TopDown supports more levels to sub-divide each area: for example
* BackendBound into computing bound and memory bound. For now we only
* support Level 1 TopDown.
*/
static double sanitize_val(double x)
{
if (x < 0 && x >= -0.02)
return 0.0;
return x;
}
static double td_total_slots(int ctx, int cpu, struct runtime_stat *st)
{
return runtime_stat_avg(st, STAT_TOPDOWN_TOTAL_SLOTS, ctx, cpu);
}
static double td_bad_spec(int ctx, int cpu, struct runtime_stat *st)
{
double bad_spec = 0;
double total_slots;
double total;
total = runtime_stat_avg(st, STAT_TOPDOWN_SLOTS_ISSUED, ctx, cpu) -
runtime_stat_avg(st, STAT_TOPDOWN_SLOTS_RETIRED, ctx, cpu) +
runtime_stat_avg(st, STAT_TOPDOWN_RECOVERY_BUBBLES, ctx, cpu);
total_slots = td_total_slots(ctx, cpu, st);
if (total_slots)
bad_spec = total / total_slots;
return sanitize_val(bad_spec);
}
static double td_retiring(int ctx, int cpu, struct runtime_stat *st)
{
double retiring = 0;
double total_slots = td_total_slots(ctx, cpu, st);
double ret_slots = runtime_stat_avg(st, STAT_TOPDOWN_SLOTS_RETIRED,
ctx, cpu);
if (total_slots)
retiring = ret_slots / total_slots;
return retiring;
}
static double td_fe_bound(int ctx, int cpu, struct runtime_stat *st)
{
double fe_bound = 0;
double total_slots = td_total_slots(ctx, cpu, st);
double fetch_bub = runtime_stat_avg(st, STAT_TOPDOWN_FETCH_BUBBLES,
ctx, cpu);
if (total_slots)
fe_bound = fetch_bub / total_slots;
return fe_bound;
}
static double td_be_bound(int ctx, int cpu, struct runtime_stat *st)
{
double sum = (td_fe_bound(ctx, cpu, st) +
td_bad_spec(ctx, cpu, st) +
td_retiring(ctx, cpu, st));
if (sum == 0)
return 0;
return sanitize_val(1.0 - sum);
}
static void print_smi_cost(struct perf_stat_config *config,
int cpu, struct perf_evsel *evsel,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
double smi_num, aperf, cycles, cost = 0.0;
int ctx = evsel_context(evsel);
const char *color = NULL;
smi_num = runtime_stat_avg(st, STAT_SMI_NUM, ctx, cpu);
aperf = runtime_stat_avg(st, STAT_APERF, ctx, cpu);
cycles = runtime_stat_avg(st, STAT_CYCLES, ctx, cpu);
if ((cycles == 0) || (aperf == 0))
return;
if (smi_num)
cost = (aperf - cycles) / aperf * 100.00;
if (cost > 10)
color = PERF_COLOR_RED;
out->print_metric(config, out->ctx, color, "%8.1f%%", "SMI cycles%", cost);
out->print_metric(config, out->ctx, NULL, "%4.0f", "SMI#", smi_num);
}
static void generic_metric(struct perf_stat_config *config,
const char *metric_expr,
struct perf_evsel **metric_events,
char *name,
const char *metric_name,
double avg,
int cpu,
struct perf_stat_output_ctx *out,
struct runtime_stat *st)
{
print_metric_t print_metric = out->print_metric;
struct parse_ctx pctx;
double ratio;
int i;
void *ctxp = out->ctx;
expr__ctx_init(&pctx);
expr__add_id(&pctx, name, avg);
for (i = 0; metric_events[i]; i++) {
struct saved_value *v;
struct stats *stats;
double scale;
if (!strcmp(metric_events[i]->name, "duration_time")) {
stats = &walltime_nsecs_stats;
scale = 1e-9;
} else {
v = saved_value_lookup(metric_events[i], cpu, false,
STAT_NONE, 0, st);
if (!v)
break;
stats = &v->stats;
scale = 1.0;
}
expr__add_id(&pctx, metric_events[i]->name, avg_stats(stats)*scale);
}
if (!metric_events[i]) {
const char *p = metric_expr;
if (expr__parse(&ratio, &pctx, &p) == 0)
print_metric(config, ctxp, NULL, "%8.1f",
metric_name ?
metric_name :
out->force_header ? name : "",
ratio);
else
print_metric(config, ctxp, NULL, NULL,
out->force_header ?
(metric_name ? metric_name : name) : "", 0);
} else
print_metric(config, ctxp, NULL, NULL, "", 0);
}
void perf_stat__print_shadow_stats(struct perf_stat_config *config,
struct perf_evsel *evsel,
double avg, int cpu,
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
struct perf_stat_output_ctx *out,
struct rblist *metric_events,
struct runtime_stat *st)
{
void *ctxp = out->ctx;
print_metric_t print_metric = out->print_metric;
double total, ratio = 0.0, total2;
const char *color = NULL;
int ctx = evsel_context(evsel);
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
struct metric_event *me;
int num = 1;
if (perf_evsel__match(evsel, HARDWARE, HW_INSTRUCTIONS)) {
total = runtime_stat_avg(st, STAT_CYCLES, ctx, cpu);
if (total) {
ratio = avg / total;
print_metric(config, ctxp, NULL, "%7.2f ",
"insn per cycle", ratio);
} else {
print_metric(config, ctxp, NULL, NULL, "insn per cycle", 0);
}
total = runtime_stat_avg(st, STAT_STALLED_CYCLES_FRONT,
ctx, cpu);
total = max(total, runtime_stat_avg(st,
STAT_STALLED_CYCLES_BACK,
ctx, cpu));
if (total && avg) {
out->new_line(config, ctxp);
ratio = total / avg;
print_metric(config, ctxp, NULL, "%7.2f ",
"stalled cycles per insn",
ratio);
} else if (have_frontend_stalled) {
print_metric(config, ctxp, NULL, NULL,
"stalled cycles per insn", 0);
}
} else if (perf_evsel__match(evsel, HARDWARE, HW_BRANCH_MISSES)) {
if (runtime_stat_n(st, STAT_BRANCHES, ctx, cpu) != 0)
print_branch_misses(config, cpu, evsel, avg, out, st);
else
print_metric(config, ctxp, NULL, NULL, "of all branches", 0);
} else if (
evsel->attr.type == PERF_TYPE_HW_CACHE &&
evsel->attr.config == ( PERF_COUNT_HW_CACHE_L1D |
((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16))) {
if (runtime_stat_n(st, STAT_L1_DCACHE, ctx, cpu) != 0)
print_l1_dcache_misses(config, cpu, evsel, avg, out, st);
else
print_metric(config, ctxp, NULL, NULL, "of all L1-dcache hits", 0);
} else if (
evsel->attr.type == PERF_TYPE_HW_CACHE &&
evsel->attr.config == ( PERF_COUNT_HW_CACHE_L1I |
((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16))) {
if (runtime_stat_n(st, STAT_L1_ICACHE, ctx, cpu) != 0)
print_l1_icache_misses(config, cpu, evsel, avg, out, st);
else
print_metric(config, ctxp, NULL, NULL, "of all L1-icache hits", 0);
} else if (
evsel->attr.type == PERF_TYPE_HW_CACHE &&
evsel->attr.config == ( PERF_COUNT_HW_CACHE_DTLB |
((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16))) {
if (runtime_stat_n(st, STAT_DTLB_CACHE, ctx, cpu) != 0)
print_dtlb_cache_misses(config, cpu, evsel, avg, out, st);
else
print_metric(config, ctxp, NULL, NULL, "of all dTLB cache hits", 0);
} else if (
evsel->attr.type == PERF_TYPE_HW_CACHE &&
evsel->attr.config == ( PERF_COUNT_HW_CACHE_ITLB |
((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16))) {
if (runtime_stat_n(st, STAT_ITLB_CACHE, ctx, cpu) != 0)
print_itlb_cache_misses(config, cpu, evsel, avg, out, st);
else
print_metric(config, ctxp, NULL, NULL, "of all iTLB cache hits", 0);
} else if (
evsel->attr.type == PERF_TYPE_HW_CACHE &&
evsel->attr.config == ( PERF_COUNT_HW_CACHE_LL |
((PERF_COUNT_HW_CACHE_OP_READ) << 8) |
((PERF_COUNT_HW_CACHE_RESULT_MISS) << 16))) {
if (runtime_stat_n(st, STAT_LL_CACHE, ctx, cpu) != 0)
print_ll_cache_misses(config, cpu, evsel, avg, out, st);
else
print_metric(config, ctxp, NULL, NULL, "of all LL-cache hits", 0);
} else if (perf_evsel__match(evsel, HARDWARE, HW_CACHE_MISSES)) {
total = runtime_stat_avg(st, STAT_CACHEREFS, ctx, cpu);
if (total)
ratio = avg * 100 / total;
if (runtime_stat_n(st, STAT_CACHEREFS, ctx, cpu) != 0)
print_metric(config, ctxp, NULL, "%8.3f %%",
"of all cache refs", ratio);
else
print_metric(config, ctxp, NULL, NULL, "of all cache refs", 0);
} else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_FRONTEND)) {
print_stalled_cycles_frontend(config, cpu, evsel, avg, out, st);
} else if (perf_evsel__match(evsel, HARDWARE, HW_STALLED_CYCLES_BACKEND)) {
print_stalled_cycles_backend(config, cpu, evsel, avg, out, st);
} else if (perf_evsel__match(evsel, HARDWARE, HW_CPU_CYCLES)) {
total = runtime_stat_avg(st, STAT_NSECS, 0, cpu);
if (total) {
ratio = avg / total;
print_metric(config, ctxp, NULL, "%8.3f", "GHz", ratio);
} else {
print_metric(config, ctxp, NULL, NULL, "Ghz", 0);
}
} else if (perf_stat_evsel__is(evsel, CYCLES_IN_TX)) {
total = runtime_stat_avg(st, STAT_CYCLES, ctx, cpu);
if (total)
print_metric(config, ctxp, NULL,
"%7.2f%%", "transactional cycles",
100.0 * (avg / total));
else
print_metric(config, ctxp, NULL, NULL, "transactional cycles",
0);
} else if (perf_stat_evsel__is(evsel, CYCLES_IN_TX_CP)) {
total = runtime_stat_avg(st, STAT_CYCLES, ctx, cpu);
total2 = runtime_stat_avg(st, STAT_CYCLES_IN_TX, ctx, cpu);
if (total2 < avg)
total2 = avg;
if (total)
print_metric(config, ctxp, NULL, "%7.2f%%", "aborted cycles",
100.0 * ((total2-avg) / total));
else
print_metric(config, ctxp, NULL, NULL, "aborted cycles", 0);
} else if (perf_stat_evsel__is(evsel, TRANSACTION_START)) {
total = runtime_stat_avg(st, STAT_CYCLES_IN_TX,
ctx, cpu);
if (avg)
ratio = total / avg;
if (runtime_stat_n(st, STAT_CYCLES_IN_TX, ctx, cpu) != 0)
print_metric(config, ctxp, NULL, "%8.0f",
"cycles / transaction", ratio);
else
print_metric(config, ctxp, NULL, NULL, "cycles / transaction",
0);
} else if (perf_stat_evsel__is(evsel, ELISION_START)) {
total = runtime_stat_avg(st, STAT_CYCLES_IN_TX,
ctx, cpu);
if (avg)
ratio = total / avg;
print_metric(config, ctxp, NULL, "%8.0f", "cycles / elision", ratio);
perf stat: Get rid of extra clock display function There's no reason to have separate function to display clock events. It's only purpose was to convert the nanosecond value into microseconds. We do that now in generic code, if the unit and scale values are properly set, which this patch do for clock events. The output differs in the unit field being displayed in its columns rather than having it added as a suffix of the event name. Plus the value is rounded into 2 decimal numbers as for any other event. Before: # perf stat -e cpu-clock,task-clock -C 0 sleep 3 Performance counter stats for 'CPU(s) 0': 3001.123137 cpu-clock (msec) # 1.000 CPUs utilized 3001.133250 task-clock (msec) # 1.000 CPUs utilized 3.001159813 seconds time elapsed Now: # perf stat -e cpu-clock,task-clock -C 0 sleep 3 Performance counter stats for 'CPU(s) 0': 3,001.05 msec cpu-clock # 1.000 CPUs utilized 3,001.05 msec task-clock # 1.000 CPUs utilized 3.001077794 seconds time elapsed There's a small difference in csv output, as we now output the unit field, which was empty before. It's in the proper spot, so there's no compatibility issue. Before: # perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3 3001.065177,,cpu-clock,3001064187,100.00,1.000,CPUs utilized 3001.077085,,task-clock,3001077085,100.00,1.000,CPUs utilized # perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3 3000.80,msec,cpu-clock,3000799026,100.00,1.000,CPUs utilized 3000.80,msec,task-clock,3000799550,100.00,1.000,CPUs utilized Add perf_evsel__is_clock to replace nsec_counter. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180720110036.32251-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-20 19:00:34 +08:00
} else if (perf_evsel__is_clock(evsel)) {
if ((ratio = avg_stats(&walltime_nsecs_stats)) != 0)
print_metric(config, ctxp, NULL, "%8.3f", "CPUs utilized",
perf stat: Get rid of extra clock display function There's no reason to have separate function to display clock events. It's only purpose was to convert the nanosecond value into microseconds. We do that now in generic code, if the unit and scale values are properly set, which this patch do for clock events. The output differs in the unit field being displayed in its columns rather than having it added as a suffix of the event name. Plus the value is rounded into 2 decimal numbers as for any other event. Before: # perf stat -e cpu-clock,task-clock -C 0 sleep 3 Performance counter stats for 'CPU(s) 0': 3001.123137 cpu-clock (msec) # 1.000 CPUs utilized 3001.133250 task-clock (msec) # 1.000 CPUs utilized 3.001159813 seconds time elapsed Now: # perf stat -e cpu-clock,task-clock -C 0 sleep 3 Performance counter stats for 'CPU(s) 0': 3,001.05 msec cpu-clock # 1.000 CPUs utilized 3,001.05 msec task-clock # 1.000 CPUs utilized 3.001077794 seconds time elapsed There's a small difference in csv output, as we now output the unit field, which was empty before. It's in the proper spot, so there's no compatibility issue. Before: # perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3 3001.065177,,cpu-clock,3001064187,100.00,1.000,CPUs utilized 3001.077085,,task-clock,3001077085,100.00,1.000,CPUs utilized # perf stat -e cpu-clock,task-clock -C 0 -x, sleep 3 3000.80,msec,cpu-clock,3000799026,100.00,1.000,CPUs utilized 3000.80,msec,task-clock,3000799550,100.00,1.000,CPUs utilized Add perf_evsel__is_clock to replace nsec_counter. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180720110036.32251-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-20 19:00:34 +08:00
avg / (ratio * evsel->scale));
else
print_metric(config, ctxp, NULL, NULL, "CPUs utilized", 0);
} else if (perf_stat_evsel__is(evsel, TOPDOWN_FETCH_BUBBLES)) {
double fe_bound = td_fe_bound(ctx, cpu, st);
if (fe_bound > 0.2)
color = PERF_COLOR_RED;
print_metric(config, ctxp, color, "%8.1f%%", "frontend bound",
fe_bound * 100.);
} else if (perf_stat_evsel__is(evsel, TOPDOWN_SLOTS_RETIRED)) {
double retiring = td_retiring(ctx, cpu, st);
if (retiring > 0.7)
color = PERF_COLOR_GREEN;
print_metric(config, ctxp, color, "%8.1f%%", "retiring",
retiring * 100.);
} else if (perf_stat_evsel__is(evsel, TOPDOWN_RECOVERY_BUBBLES)) {
double bad_spec = td_bad_spec(ctx, cpu, st);
if (bad_spec > 0.1)
color = PERF_COLOR_RED;
print_metric(config, ctxp, color, "%8.1f%%", "bad speculation",
bad_spec * 100.);
} else if (perf_stat_evsel__is(evsel, TOPDOWN_SLOTS_ISSUED)) {
double be_bound = td_be_bound(ctx, cpu, st);
const char *name = "backend bound";
static int have_recovery_bubbles = -1;
/* In case the CPU does not support topdown-recovery-bubbles */
if (have_recovery_bubbles < 0)
have_recovery_bubbles = pmu_have_event("cpu",
"topdown-recovery-bubbles");
if (!have_recovery_bubbles)
name = "backend bound/bad spec";
if (be_bound > 0.2)
color = PERF_COLOR_RED;
if (td_total_slots(ctx, cpu, st) > 0)
print_metric(config, ctxp, color, "%8.1f%%", name,
be_bound * 100.);
else
print_metric(config, ctxp, NULL, NULL, name, 0);
perf stat: Output JSON MetricExpr metric Add generic infrastructure to perf stat to output ratios for "MetricExpr" entries in the event lists. Many events are more useful as ratios than in raw form, typically some count in relation to total ticks. Transfer the MetricExpr information from the alias to the evsel. We mark the events that need to be collected for MetricExpr, and also link the events using them with a pointer. The code is careful to always prefer the right event in the same group to minimize multiplexing errors. At the moment only a single relation is supported. Then add a rblist to the stat shadow code that remembers stats based on the cpu and context. Then finally update and retrieve and print these values similarly to the existing hardcoded perf metrics. We use the simple expression parser added earlier to evaluate the expression. Normally we just output the result without further commentary, but for --metric-only this would lead to empty columns. So for this case use the original event as description. There is no attempt to automatically add the MetricExpr event, if it is missing, however we suggest it to the user, because the user tool doesn't have enough information to reliably construct a group that is guaranteed to schedule. So we leave that to the user. % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' 1.000147889 800,085,181 unc_p_clockticks 1.000147889 93,126,241 unc_p_freq_max_os_cycles # 11.6 2.000448381 800,218,217 unc_p_clockticks 2.000448381 142,516,095 unc_p_freq_max_os_cycles # 17.8 3.000639852 800,243,057 unc_p_clockticks 3.000639852 162,292,689 unc_p_freq_max_os_cycles # 20.3 % perf stat -a -I 1000 -e '{unc_p_clockticks,unc_p_freq_max_os_cycles}' --metric-only # time freq_max_os_cycles % 1.000127077 0.9 2.000301436 0.7 3.000456379 0.0 v2: Change from DivideBy to MetricExpr v3: Use expr__ prefix. Support more than one other event. v4: Update description v5: Only print warning message once for multiple PMUs. Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170320201711.14142-11-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-21 04:17:08 +08:00
} else if (evsel->metric_expr) {
generic_metric(config, evsel->metric_expr, evsel->metric_events, evsel->name,
evsel->metric_name, avg, cpu, out, st);
} else if (runtime_stat_n(st, STAT_NSECS, 0, cpu) != 0) {
char unit = 'M';
char unit_buf[10];
total = runtime_stat_avg(st, STAT_NSECS, 0, cpu);
if (total)
ratio = 1000.0 * avg / total;
if (ratio < 0.001) {
ratio *= 1000;
unit = 'K';
}
snprintf(unit_buf, sizeof(unit_buf), "%c/sec", unit);
print_metric(config, ctxp, NULL, "%8.3f", unit_buf, ratio);
} else if (perf_stat_evsel__is(evsel, SMI_NUM)) {
print_smi_cost(config, cpu, evsel, out, st);
} else {
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
num = 0;
}
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
if ((me = metricgroup__lookup(metric_events, evsel, false)) != NULL) {
struct metric_expr *mexp;
list_for_each_entry (mexp, &me->head, nd) {
if (num++ > 0)
out->new_line(config, ctxp);
generic_metric(config, mexp->metric_expr, mexp->metric_events,
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
evsel->name, mexp->metric_name,
avg, cpu, out, st);
perf stat: Support JSON metrics in perf stat Add generic support for standalone metrics specified in JSON files to perf stat. A metric is a formula that uses multiple events to compute a higher level result (e.g. IPC). Previously metrics were always tied to an event and automatically enabled with that event. But now change it that we can have standalone metrics. They are in the same JSON data structure as events, but don't have an event name. We also allow to organize the metrics in metric groups, which allows a short cut to select several related metrics at once. Add a new -M / --metrics option to perf stat that adds the metrics or metric groups specified. Add the core code to manage and parse the metric groups. They are collected from the JSON data structures into a separate rblist. When computing shadow values look for metrics in that list. Then they are computed using the existing saved values infrastructure in stat-shadow.c The actual JSON metrics are in a separate pull request. % perf stat -M Summary --metric-only -a sleep 1 Performance counter stats for 'system wide': Instructions CLKS CPU_Utilization GFLOPs SMT_2T_Utilization Kernel_Utilization 317614222.0 1392930775.0 0.0 0.0 0.2 0.1 1.001497549 seconds time elapsed % perf stat -M GFLOPs flops Performance counter stats for 'flops': 3,999,541,471 fp_comp_ops_exe.sse_scalar_single # 1.2 GFLOPs (66.65%) 14 fp_comp_ops_exe.sse_scalar_double (66.65%) 0 fp_comp_ops_exe.sse_packed_double (66.67%) 0 fp_comp_ops_exe.sse_packed_single (66.70%) 0 simd_fp_256.packed_double (66.70%) 0 simd_fp_256.packed_single (66.67%) 0 duration_time 3.238372845 seconds time elapsed v2: Add missing header file v3: Move find_map to pmu.c Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Link: http://lkml.kernel.org/r/20170831194036.30146-7-andi@firstfloor.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-09-01 03:40:31 +08:00
}
}
if (num == 0)
print_metric(config, ctxp, NULL, NULL, NULL, 0);
}