linux/arch/mips/mm/c-r4k.c

2041 lines
53 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997, 1998, 1999, 2000, 2001, 2002 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999, 2000 Silicon Graphics, Inc.
*/
#include <linux/cpu_pm.h>
#include <linux/hardirq.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/kernel.h>
#include <linux/linkage.h>
#include <linux/preempt.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/export.h>
#include <linux/bitops.h>
#include <asm/bcache.h>
#include <asm/bootinfo.h>
#include <asm/cache.h>
#include <asm/cacheops.h>
#include <asm/cpu.h>
#include <asm/cpu-features.h>
#include <asm/cpu-type.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/r4kcache.h>
#include <asm/sections.h>
#include <asm/mmu_context.h>
#include <asm/war.h>
#include <asm/cacheflush.h> /* for run_uncached() */
#include <asm/traps.h>
#include <asm/dma-coherence.h>
#include <asm/mips-cps.h>
/*
* Bits describing what cache ops an SMP callback function may perform.
*
* R4K_HIT - Virtual user or kernel address based cache operations. The
* active_mm must be checked before using user addresses, falling
* back to kmap.
* R4K_INDEX - Index based cache operations.
*/
#define R4K_HIT BIT(0)
#define R4K_INDEX BIT(1)
/**
* r4k_op_needs_ipi() - Decide if a cache op needs to be done on every core.
* @type: Type of cache operations (R4K_HIT or R4K_INDEX).
*
* Decides whether a cache op needs to be performed on every core in the system.
* This may change depending on the @type of cache operation, as well as the set
* of online CPUs, so preemption should be disabled by the caller to prevent CPU
* hotplug from changing the result.
*
* Returns: 1 if the cache operation @type should be done on every core in
* the system.
* 0 if the cache operation @type is globalized and only needs to
* be performed on a simple CPU.
*/
static inline bool r4k_op_needs_ipi(unsigned int type)
{
/* The MIPS Coherence Manager (CM) globalizes address-based cache ops */
MIPS: c-r4k: Use SMP calls for CM indexed cache ops The MIPS Coherence Manager (CM) can propagate address-based ("hit") cache operations to other cores in the coherent system, alleviating software of the need to use SMP calls, however indexed cache operations are not propagated by hardware since doing so makes no sense for separate caches. Update r4k_op_needs_ipi() to report that only hit cache operations are globalized by the CM, requiring indexed cache operations to be globalized by software via an SMP call. r4k_on_each_cpu() previously had a special case for CONFIG_MIPS_MT_SMP, intended to avoid the SMP calls when the only other CPUs in the system were other VPEs in the same core, and hence sharing the same caches. This was changed by commit cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores") to apparently handle multi-core multi-VPE systems, but it focussed mainly on hit cache ops, so the SMP calls were still disabled entirely for CM systems. This doesn't normally cause problems, but tests can be written to hit these corner cases by using multiple threads, or changing task affinities to force the process to migrate cores. For example the failure of mprotect RW->RX to globally sync icaches (via flush_cache_range) can be detected by modifying and mprotecting a code page on one core, and migrating to a different core to execute from it. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13807/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:56 +08:00
if (type == R4K_HIT && mips_cm_present())
return false;
/*
* Hardware doesn't globalize the required cache ops, so SMP calls may
* be needed, but only if there are foreign CPUs (non-siblings with
* separate caches).
*/
/* cpu_foreign_map[] undeclared when !CONFIG_SMP */
#ifdef CONFIG_SMP
return !cpumask_empty(&cpu_foreign_map[0]);
#else
return false;
#endif
}
/*
* Special Variant of smp_call_function for use by cache functions:
*
* o No return value
* o collapses to normal function call on UP kernels
* o collapses to normal function call on systems with a single shared
* primary cache.
* o doesn't disable interrupts on the local CPU
*/
static inline void r4k_on_each_cpu(unsigned int type,
void (*func)(void *info), void *info)
{
preempt_disable();
if (r4k_op_needs_ipi(type))
smp_call_function_many(&cpu_foreign_map[smp_processor_id()],
func, info, 1);
func(info);
preempt_enable();
}
/*
* Must die.
*/
static unsigned long icache_size __read_mostly;
static unsigned long dcache_size __read_mostly;
static unsigned long vcache_size __read_mostly;
static unsigned long scache_size __read_mostly;
/*
* Dummy cache handling routines for machines without boardcaches
*/
static void cache_noop(void) {}
static struct bcache_ops no_sc_ops = {
.bc_enable = (void *)cache_noop,
.bc_disable = (void *)cache_noop,
.bc_wback_inv = (void *)cache_noop,
.bc_inv = (void *)cache_noop
};
struct bcache_ops *bcops = &no_sc_ops;
#define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010)
#define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020)
#define R4600_HIT_CACHEOP_WAR_IMPL \
do { \
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) \
*(volatile unsigned long *)CKSEG1; \
if (R4600_V1_HIT_CACHEOP_WAR) \
__asm__ __volatile__("nop;nop;nop;nop"); \
} while (0)
static void (*r4k_blast_dcache_page)(unsigned long addr);
static inline void r4k_blast_dcache_page_dc32(unsigned long addr)
{
R4600_HIT_CACHEOP_WAR_IMPL;
blast_dcache32_page(addr);
}
static inline void r4k_blast_dcache_page_dc64(unsigned long addr)
{
blast_dcache64_page(addr);
}
static inline void r4k_blast_dcache_page_dc128(unsigned long addr)
{
blast_dcache128_page(addr);
}
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_dcache_page_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
switch (dc_lsize) {
case 0:
r4k_blast_dcache_page = (void *)cache_noop;
break;
case 16:
r4k_blast_dcache_page = blast_dcache16_page;
break;
case 32:
r4k_blast_dcache_page = r4k_blast_dcache_page_dc32;
break;
case 64:
r4k_blast_dcache_page = r4k_blast_dcache_page_dc64;
break;
case 128:
r4k_blast_dcache_page = r4k_blast_dcache_page_dc128;
break;
default:
break;
}
}
#ifndef CONFIG_EVA
#define r4k_blast_dcache_user_page r4k_blast_dcache_page
#else
static void (*r4k_blast_dcache_user_page)(unsigned long addr);
static void r4k_blast_dcache_user_page_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
if (dc_lsize == 0)
r4k_blast_dcache_user_page = (void *)cache_noop;
else if (dc_lsize == 16)
r4k_blast_dcache_user_page = blast_dcache16_user_page;
else if (dc_lsize == 32)
r4k_blast_dcache_user_page = blast_dcache32_user_page;
else if (dc_lsize == 64)
r4k_blast_dcache_user_page = blast_dcache64_user_page;
}
#endif
static void (* r4k_blast_dcache_page_indexed)(unsigned long addr);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_dcache_page_indexed_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
if (dc_lsize == 0)
r4k_blast_dcache_page_indexed = (void *)cache_noop;
else if (dc_lsize == 16)
r4k_blast_dcache_page_indexed = blast_dcache16_page_indexed;
else if (dc_lsize == 32)
r4k_blast_dcache_page_indexed = blast_dcache32_page_indexed;
else if (dc_lsize == 64)
r4k_blast_dcache_page_indexed = blast_dcache64_page_indexed;
else if (dc_lsize == 128)
r4k_blast_dcache_page_indexed = blast_dcache128_page_indexed;
}
void (* r4k_blast_dcache)(void);
EXPORT_SYMBOL(r4k_blast_dcache);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_dcache_setup(void)
{
unsigned long dc_lsize = cpu_dcache_line_size();
if (dc_lsize == 0)
r4k_blast_dcache = (void *)cache_noop;
else if (dc_lsize == 16)
r4k_blast_dcache = blast_dcache16;
else if (dc_lsize == 32)
r4k_blast_dcache = blast_dcache32;
else if (dc_lsize == 64)
r4k_blast_dcache = blast_dcache64;
else if (dc_lsize == 128)
r4k_blast_dcache = blast_dcache128;
}
/* force code alignment (used for TX49XX_ICACHE_INDEX_INV_WAR) */
#define JUMP_TO_ALIGN(order) \
__asm__ __volatile__( \
"b\t1f\n\t" \
".align\t" #order "\n\t" \
"1:\n\t" \
)
#define CACHE32_UNROLL32_ALIGN JUMP_TO_ALIGN(10) /* 32 * 32 = 1024 */
#define CACHE32_UNROLL32_ALIGN2 JUMP_TO_ALIGN(11)
static inline void blast_r4600_v1_icache32(void)
{
unsigned long flags;
local_irq_save(flags);
blast_icache32();
local_irq_restore(flags);
}
static inline void tx49_blast_icache32(void)
{
unsigned long start = INDEX_BASE;
unsigned long end = start + current_cpu_data.icache.waysize;
unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
unsigned long ws_end = current_cpu_data.icache.ways <<
current_cpu_data.icache.waybit;
unsigned long ws, addr;
CACHE32_UNROLL32_ALIGN2;
/* I'm in even chunk. blast odd chunks */
for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws, Index_Invalidate_I);
CACHE32_UNROLL32_ALIGN;
/* I'm in odd chunk. blast even chunks */
for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws, Index_Invalidate_I);
}
static inline void blast_icache32_r4600_v1_page_indexed(unsigned long page)
{
unsigned long flags;
local_irq_save(flags);
blast_icache32_page_indexed(page);
local_irq_restore(flags);
}
static inline void tx49_blast_icache32_page_indexed(unsigned long page)
{
unsigned long indexmask = current_cpu_data.icache.waysize - 1;
unsigned long start = INDEX_BASE + (page & indexmask);
unsigned long end = start + PAGE_SIZE;
unsigned long ws_inc = 1UL << current_cpu_data.icache.waybit;
unsigned long ws_end = current_cpu_data.icache.ways <<
current_cpu_data.icache.waybit;
unsigned long ws, addr;
CACHE32_UNROLL32_ALIGN2;
/* I'm in even chunk. blast odd chunks */
for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start + 0x400; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws, Index_Invalidate_I);
CACHE32_UNROLL32_ALIGN;
/* I'm in odd chunk. blast even chunks */
for (ws = 0; ws < ws_end; ws += ws_inc)
for (addr = start; addr < end; addr += 0x400 * 2)
cache32_unroll32(addr|ws, Index_Invalidate_I);
}
static void (* r4k_blast_icache_page)(unsigned long addr);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_icache_page_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
if (ic_lsize == 0)
r4k_blast_icache_page = (void *)cache_noop;
else if (ic_lsize == 16)
r4k_blast_icache_page = blast_icache16_page;
else if (ic_lsize == 32 && current_cpu_type() == CPU_LOONGSON2)
r4k_blast_icache_page = loongson2_blast_icache32_page;
else if (ic_lsize == 32)
r4k_blast_icache_page = blast_icache32_page;
else if (ic_lsize == 64)
r4k_blast_icache_page = blast_icache64_page;
else if (ic_lsize == 128)
r4k_blast_icache_page = blast_icache128_page;
}
#ifndef CONFIG_EVA
#define r4k_blast_icache_user_page r4k_blast_icache_page
#else
static void (*r4k_blast_icache_user_page)(unsigned long addr);
static void r4k_blast_icache_user_page_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
if (ic_lsize == 0)
r4k_blast_icache_user_page = (void *)cache_noop;
else if (ic_lsize == 16)
r4k_blast_icache_user_page = blast_icache16_user_page;
else if (ic_lsize == 32)
r4k_blast_icache_user_page = blast_icache32_user_page;
else if (ic_lsize == 64)
r4k_blast_icache_user_page = blast_icache64_user_page;
}
#endif
static void (* r4k_blast_icache_page_indexed)(unsigned long addr);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_icache_page_indexed_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
if (ic_lsize == 0)
r4k_blast_icache_page_indexed = (void *)cache_noop;
else if (ic_lsize == 16)
r4k_blast_icache_page_indexed = blast_icache16_page_indexed;
else if (ic_lsize == 32) {
if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
r4k_blast_icache_page_indexed =
blast_icache32_r4600_v1_page_indexed;
else if (TX49XX_ICACHE_INDEX_INV_WAR)
r4k_blast_icache_page_indexed =
tx49_blast_icache32_page_indexed;
else if (current_cpu_type() == CPU_LOONGSON2)
r4k_blast_icache_page_indexed =
loongson2_blast_icache32_page_indexed;
else
r4k_blast_icache_page_indexed =
blast_icache32_page_indexed;
} else if (ic_lsize == 64)
r4k_blast_icache_page_indexed = blast_icache64_page_indexed;
}
void (* r4k_blast_icache)(void);
EXPORT_SYMBOL(r4k_blast_icache);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_icache_setup(void)
{
unsigned long ic_lsize = cpu_icache_line_size();
if (ic_lsize == 0)
r4k_blast_icache = (void *)cache_noop;
else if (ic_lsize == 16)
r4k_blast_icache = blast_icache16;
else if (ic_lsize == 32) {
if (R4600_V1_INDEX_ICACHEOP_WAR && cpu_is_r4600_v1_x())
r4k_blast_icache = blast_r4600_v1_icache32;
else if (TX49XX_ICACHE_INDEX_INV_WAR)
r4k_blast_icache = tx49_blast_icache32;
else if (current_cpu_type() == CPU_LOONGSON2)
r4k_blast_icache = loongson2_blast_icache32;
else
r4k_blast_icache = blast_icache32;
} else if (ic_lsize == 64)
r4k_blast_icache = blast_icache64;
else if (ic_lsize == 128)
r4k_blast_icache = blast_icache128;
}
static void (* r4k_blast_scache_page)(unsigned long addr);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_scache_page_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
if (scache_size == 0)
r4k_blast_scache_page = (void *)cache_noop;
else if (sc_lsize == 16)
r4k_blast_scache_page = blast_scache16_page;
else if (sc_lsize == 32)
r4k_blast_scache_page = blast_scache32_page;
else if (sc_lsize == 64)
r4k_blast_scache_page = blast_scache64_page;
else if (sc_lsize == 128)
r4k_blast_scache_page = blast_scache128_page;
}
static void (* r4k_blast_scache_page_indexed)(unsigned long addr);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_scache_page_indexed_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
if (scache_size == 0)
r4k_blast_scache_page_indexed = (void *)cache_noop;
else if (sc_lsize == 16)
r4k_blast_scache_page_indexed = blast_scache16_page_indexed;
else if (sc_lsize == 32)
r4k_blast_scache_page_indexed = blast_scache32_page_indexed;
else if (sc_lsize == 64)
r4k_blast_scache_page_indexed = blast_scache64_page_indexed;
else if (sc_lsize == 128)
r4k_blast_scache_page_indexed = blast_scache128_page_indexed;
}
static void (* r4k_blast_scache)(void);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_blast_scache_setup(void)
{
unsigned long sc_lsize = cpu_scache_line_size();
if (scache_size == 0)
r4k_blast_scache = (void *)cache_noop;
else if (sc_lsize == 16)
r4k_blast_scache = blast_scache16;
else if (sc_lsize == 32)
r4k_blast_scache = blast_scache32;
else if (sc_lsize == 64)
r4k_blast_scache = blast_scache64;
else if (sc_lsize == 128)
r4k_blast_scache = blast_scache128;
}
static inline void local_r4k___flush_cache_all(void * args)
{
switch (current_cpu_type()) {
case CPU_LOONGSON2:
case CPU_LOONGSON3:
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4400SC:
case CPU_R4400MC:
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_R16000:
/*
* These caches are inclusive caches, that is, if something
* is not cached in the S-cache, we know it also won't be
* in one of the primary caches.
*/
r4k_blast_scache();
break;
case CPU_BMIPS5000:
r4k_blast_scache();
__sync();
break;
default:
r4k_blast_dcache();
r4k_blast_icache();
break;
}
}
static void r4k___flush_cache_all(void)
{
r4k_on_each_cpu(R4K_INDEX, local_r4k___flush_cache_all, NULL);
}
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
/**
* has_valid_asid() - Determine if an mm already has an ASID.
* @mm: Memory map.
* @type: R4K_HIT or R4K_INDEX, type of cache op.
*
* Determines whether @mm already has an ASID on any of the CPUs which cache ops
* of type @type within an r4k_on_each_cpu() call will affect. If
* r4k_on_each_cpu() does an SMP call to a single VPE in each core, then the
* scope of the operation is confined to sibling CPUs, otherwise all online CPUs
* will need to be checked.
*
* Must be called in non-preemptive context.
*
* Returns: 1 if the CPUs affected by @type cache ops have an ASID for @mm.
* 0 otherwise.
*/
static inline int has_valid_asid(const struct mm_struct *mm, unsigned int type)
[MIPS] MT: Fix bug in multithreaded kernels. When GDB writes a breakpoint into address area of inferior process the kernel needs to invalidate the modified memory in the inferior which is done by calling flush_cache_page which in turns calls r4k_flush_cache_page and local_r4k_flush_cache_page for VSMP or SMTC kernel via r4k_on_each_cpu(). As the VSMP and SMTC SMP kernels for 34K are running on a single shared caches it is possible to get away without interprocessor function calls. This optimization is implemented in r4k_on_each_cpu, so local_r4k_flush_cache_page is only ever called on the local CPU. This is where the following code in local_r4k_flush_cache_page() strikes: /* * If ownes no valid ASID yet, cannot possibly have gotten * this page into the cache. */ if (cpu_context(smp_processor_id(), mm) == 0) return; On VSMP and SMTC had a function of cpu_context() for each CPU(TC). So in case another CPU than the CPU executing local_r4k_cache_flush_page has not accessed the mm but one of the other CPUs has there may be data to be flushed in the cache yet local_r4k_cache_flush_page will falsely return leaving the I-cache inconsistent for the breakpoint. While the issue was discovered with GDB it also exists in local_r4k_flush_cache_range() and local_r4k_flush_cache(). Fixed by introducing a new function has_valid_asid which on MT kernels returns true if a mm is active on any processor in the system. This is relativly expensive since for memory acccesses in that loop cache misses have to be assumed but it seems the most viable solution for 2.6.23 and older -stable kernels. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-08 23:38:37 +08:00
{
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
unsigned int i;
const cpumask_t *mask = cpu_present_mask;
[MIPS] MT: Fix bug in multithreaded kernels. When GDB writes a breakpoint into address area of inferior process the kernel needs to invalidate the modified memory in the inferior which is done by calling flush_cache_page which in turns calls r4k_flush_cache_page and local_r4k_flush_cache_page for VSMP or SMTC kernel via r4k_on_each_cpu(). As the VSMP and SMTC SMP kernels for 34K are running on a single shared caches it is possible to get away without interprocessor function calls. This optimization is implemented in r4k_on_each_cpu, so local_r4k_flush_cache_page is only ever called on the local CPU. This is where the following code in local_r4k_flush_cache_page() strikes: /* * If ownes no valid ASID yet, cannot possibly have gotten * this page into the cache. */ if (cpu_context(smp_processor_id(), mm) == 0) return; On VSMP and SMTC had a function of cpu_context() for each CPU(TC). So in case another CPU than the CPU executing local_r4k_cache_flush_page has not accessed the mm but one of the other CPUs has there may be data to be flushed in the cache yet local_r4k_cache_flush_page will falsely return leaving the I-cache inconsistent for the breakpoint. While the issue was discovered with GDB it also exists in local_r4k_flush_cache_range() and local_r4k_flush_cache(). Fixed by introducing a new function has_valid_asid which on MT kernels returns true if a mm is active on any processor in the system. This is relativly expensive since for memory acccesses in that loop cache misses have to be assumed but it seems the most viable solution for 2.6.23 and older -stable kernels. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-08 23:38:37 +08:00
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
/* cpu_sibling_map[] undeclared when !CONFIG_SMP */
#ifdef CONFIG_SMP
/*
* If r4k_on_each_cpu does SMP calls, it does them to a single VPE in
* each foreign core, so we only need to worry about siblings.
* Otherwise we need to worry about all present CPUs.
*/
if (r4k_op_needs_ipi(type))
mask = &cpu_sibling_map[smp_processor_id()];
#endif
for_each_cpu(i, mask)
[MIPS] MT: Fix bug in multithreaded kernels. When GDB writes a breakpoint into address area of inferior process the kernel needs to invalidate the modified memory in the inferior which is done by calling flush_cache_page which in turns calls r4k_flush_cache_page and local_r4k_flush_cache_page for VSMP or SMTC kernel via r4k_on_each_cpu(). As the VSMP and SMTC SMP kernels for 34K are running on a single shared caches it is possible to get away without interprocessor function calls. This optimization is implemented in r4k_on_each_cpu, so local_r4k_flush_cache_page is only ever called on the local CPU. This is where the following code in local_r4k_flush_cache_page() strikes: /* * If ownes no valid ASID yet, cannot possibly have gotten * this page into the cache. */ if (cpu_context(smp_processor_id(), mm) == 0) return; On VSMP and SMTC had a function of cpu_context() for each CPU(TC). So in case another CPU than the CPU executing local_r4k_cache_flush_page has not accessed the mm but one of the other CPUs has there may be data to be flushed in the cache yet local_r4k_cache_flush_page will falsely return leaving the I-cache inconsistent for the breakpoint. While the issue was discovered with GDB it also exists in local_r4k_flush_cache_range() and local_r4k_flush_cache(). Fixed by introducing a new function has_valid_asid which on MT kernels returns true if a mm is active on any processor in the system. This is relativly expensive since for memory acccesses in that loop cache misses have to be assumed but it seems the most viable solution for 2.6.23 and older -stable kernels. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-10-08 23:38:37 +08:00
if (cpu_context(i, mm))
return 1;
return 0;
}
static void r4k__flush_cache_vmap(void)
{
r4k_blast_dcache();
}
static void r4k__flush_cache_vunmap(void)
{
r4k_blast_dcache();
}
MIPS: SMP: Clear ASID without confusing has_valid_asid() The SMP flush_tlb_*() functions may clear the memory map's ASIDs for other CPUs if the mm has only a single user (the current CPU) in order to avoid SMP calls. However this makes it appear to has_valid_asid(), which is used by various cache flush functions, as if the CPUs have never run in the mm, and therefore can't have cached any of its memory. For flush_tlb_mm() this doesn't sound unreasonable. flush_tlb_range() corresponds to flush_cache_range() which does do full indexed cache flushes, but only on the icache if the specified mapping is executable, otherwise it doesn't guarantee that there are no cache contents left for the mm. flush_tlb_page() corresponds to flush_cache_page(), which will perform address based cache ops on the specified page only, and also only touches the icache if the page is executable. It does not guarantee that there are no cache contents left for the mm. For example, this affects flush_cache_range() which uses the has_valid_asid() optimisation. It is required to flush the icache when mappings are made executable (e.g. using mprotect) so they are immediately usable. If some code is changed to non executable in order to be modified then it will not be flushed from the icache during that time, but the ASID on other CPUs may still be cleared for TLB flushing. When the code is changed back to executable, flush_cache_range() will assume the code hasn't run on those other CPUs due to the zero ASID, and won't invalidate the icache on them. This is fixed by clearing the other CPUs ASIDs to 1 instead of 0 for the above two flush_tlb_*() functions when the corresponding cache flushes are likely to be incomplete (non executable range flush, or any page flush). This ASID appears valid to has_valid_asid(), but still triggers ASID regeneration due to the upper ASID version bits being 0, which is less than the minimum ASID version of 1 and so always treated as stale. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13795/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:44 +08:00
/*
* Note: flush_tlb_range() assumes flush_cache_range() sufficiently flushes
* whole caches when vma is executable.
*/
static inline void local_r4k_flush_cache_range(void * args)
{
struct vm_area_struct *vma = args;
int exec = vma->vm_flags & VM_EXEC;
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
if (!has_valid_asid(vma->vm_mm, R4K_INDEX))
return;
MIPS: c-r4k: Sync icache when it fills from dcache It is still necessary to handle icache coherency in flush_cache_range() and copy_to_user_page() when the icache fills from the dcache, even though the dcache does not need to be written back. However when this handling was added in commit 2eaa7ec286db ("[MIPS] Handle I-cache coherency in flush_cache_range()"), it did not do any icache flushing when it fills from dcache. Therefore fix r4k_flush_cache_range() to run local_r4k_flush_cache_range() without taking into account whether icache fills from dcache, so that the icache coherency gets handled. Checks are also added in local_r4k_flush_cache_range() so that the dcache blast doesn't take place when icache fills from dcache. A test to mmap a page PROT_READ|PROT_WRITE, modify code in it, and mprotect it to VM_READ|VM_EXEC (similar to case described in above commit) can hit this case quite easily to verify the fix. A similar check was added in commit f8829caee311 ("[MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page"), so also fix copy_to_user_page() similarly, to call flush_cache_page() without taking into account whether icache fills from dcache, since flush_cache_page() already takes that into account to avoid performing a dcache flush. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12179/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-22 18:58:25 +08:00
/*
* If dcache can alias, we must blast it since mapping is changing.
* If executable, we must ensure any dirty lines are written back far
* enough to be visible to icache.
*/
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc))
r4k_blast_dcache();
/* If executable, blast stale lines from icache */
if (exec)
r4k_blast_icache();
}
static void r4k_flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
int exec = vma->vm_flags & VM_EXEC;
MIPS: c-r4k: Sync icache when it fills from dcache It is still necessary to handle icache coherency in flush_cache_range() and copy_to_user_page() when the icache fills from the dcache, even though the dcache does not need to be written back. However when this handling was added in commit 2eaa7ec286db ("[MIPS] Handle I-cache coherency in flush_cache_range()"), it did not do any icache flushing when it fills from dcache. Therefore fix r4k_flush_cache_range() to run local_r4k_flush_cache_range() without taking into account whether icache fills from dcache, so that the icache coherency gets handled. Checks are also added in local_r4k_flush_cache_range() so that the dcache blast doesn't take place when icache fills from dcache. A test to mmap a page PROT_READ|PROT_WRITE, modify code in it, and mprotect it to VM_READ|VM_EXEC (similar to case described in above commit) can hit this case quite easily to verify the fix. A similar check was added in commit f8829caee311 ("[MIPS] Fix aliasing bug in copy_to_user_page / copy_from_user_page"), so also fix copy_to_user_page() similarly, to call flush_cache_page() without taking into account whether icache fills from dcache, since flush_cache_page() already takes that into account to avoid performing a dcache flush. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12179/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-22 18:58:25 +08:00
if (cpu_has_dc_aliases || exec)
r4k_on_each_cpu(R4K_INDEX, local_r4k_flush_cache_range, vma);
}
static inline void local_r4k_flush_cache_mm(void * args)
{
struct mm_struct *mm = args;
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
if (!has_valid_asid(mm, R4K_INDEX))
return;
/*
* Kludge alert. For obscure reasons R4000SC and R4400SC go nuts if we
* only flush the primary caches but R1x000 behave sane ...
* R4000SC and R4400SC indexed S-cache ops also invalidate primary
* caches, so we can bail out early.
*/
if (current_cpu_type() == CPU_R4000SC ||
current_cpu_type() == CPU_R4000MC ||
current_cpu_type() == CPU_R4400SC ||
current_cpu_type() == CPU_R4400MC) {
r4k_blast_scache();
return;
}
r4k_blast_dcache();
}
static void r4k_flush_cache_mm(struct mm_struct *mm)
{
if (!cpu_has_dc_aliases)
return;
r4k_on_each_cpu(R4K_INDEX, local_r4k_flush_cache_mm, mm);
}
struct flush_cache_page_args {
struct vm_area_struct *vma;
unsigned long addr;
unsigned long pfn;
};
static inline void local_r4k_flush_cache_page(void *args)
{
struct flush_cache_page_args *fcp_args = args;
struct vm_area_struct *vma = fcp_args->vma;
unsigned long addr = fcp_args->addr;
struct page *page = pfn_to_page(fcp_args->pfn);
int exec = vma->vm_flags & VM_EXEC;
struct mm_struct *mm = vma->vm_mm;
int map_coherent = 0;
pgd_t *pgdp;
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep;
void *vaddr;
/*
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
* If owns no valid ASID yet, cannot possibly have gotten
* this page into the cache.
*/
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
if (!has_valid_asid(mm, R4K_HIT))
return;
addr &= PAGE_MASK;
pgdp = pgd_offset(mm, addr);
pudp = pud_offset(pgdp, addr);
pmdp = pmd_offset(pudp, addr);
ptep = pte_offset(pmdp, addr);
/*
* If the page isn't marked valid, the page cannot possibly be
* in the cache.
*/
if (!(pte_present(*ptep)))
return;
if ((mm == current->active_mm) && (pte_val(*ptep) & _PAGE_VALID))
vaddr = NULL;
else {
/*
* Use kmap_coherent or kmap_atomic to do flushes for
* another ASID than the current one.
*/
map_coherent = (cpu_has_dc_aliases &&
page_mapcount(page) &&
!Page_dcache_dirty(page));
if (map_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page);
addr = (unsigned long)vaddr;
}
if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc)) {
vaddr ? r4k_blast_dcache_page(addr) :
r4k_blast_dcache_user_page(addr);
if (exec && !cpu_icache_snoops_remote_store)
r4k_blast_scache_page(addr);
}
if (exec) {
if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) {
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0)
drop_mmu_context(mm, cpu);
} else
vaddr ? r4k_blast_icache_page(addr) :
r4k_blast_icache_user_page(addr);
}
if (vaddr) {
if (map_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr);
}
}
static void r4k_flush_cache_page(struct vm_area_struct *vma,
unsigned long addr, unsigned long pfn)
{
struct flush_cache_page_args args;
args.vma = vma;
args.addr = addr;
args.pfn = pfn;
r4k_on_each_cpu(R4K_HIT, local_r4k_flush_cache_page, &args);
}
static inline void local_r4k_flush_data_cache_page(void * addr)
{
r4k_blast_dcache_page((unsigned long) addr);
}
static void r4k_flush_data_cache_page(unsigned long addr)
{
if (in_atomic())
local_r4k_flush_data_cache_page((void *)addr);
else
r4k_on_each_cpu(R4K_HIT, local_r4k_flush_data_cache_page,
(void *) addr);
}
struct flush_icache_range_args {
unsigned long start;
unsigned long end;
unsigned int type;
bool user;
};
static inline void __local_r4k_flush_icache_range(unsigned long start,
unsigned long end,
unsigned int type,
bool user)
{
if (!cpu_has_ic_fills_f_dc) {
if (type == R4K_INDEX ||
(type & R4K_INDEX && end - start >= dcache_size)) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
if (user)
protected_blast_dcache_range(start, end);
else
blast_dcache_range(start, end);
}
}
if (type == R4K_INDEX ||
(type & R4K_INDEX && end - start > icache_size))
r4k_blast_icache();
else {
switch (boot_cpu_type()) {
case CPU_LOONGSON2:
protected_loongson2_blast_icache_range(start, end);
break;
default:
if (user)
protected_blast_icache_range(start, end);
else
blast_icache_range(start, end);
break;
}
}
}
static inline void local_r4k_flush_icache_range(unsigned long start,
unsigned long end)
{
__local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX, false);
}
static inline void local_r4k_flush_icache_user_range(unsigned long start,
unsigned long end)
{
__local_r4k_flush_icache_range(start, end, R4K_HIT | R4K_INDEX, true);
}
static inline void local_r4k_flush_icache_range_ipi(void *args)
{
struct flush_icache_range_args *fir_args = args;
unsigned long start = fir_args->start;
unsigned long end = fir_args->end;
unsigned int type = fir_args->type;
bool user = fir_args->user;
__local_r4k_flush_icache_range(start, end, type, user);
}
static void __r4k_flush_icache_range(unsigned long start, unsigned long end,
bool user)
{
struct flush_icache_range_args args;
unsigned long size, cache_size;
args.start = start;
args.end = end;
args.type = R4K_HIT | R4K_INDEX;
args.user = user;
/*
* Indexed cache ops require an SMP call.
* Consider if that can or should be avoided.
*/
preempt_disable();
if (r4k_op_needs_ipi(R4K_INDEX) && !r4k_op_needs_ipi(R4K_HIT)) {
/*
* If address-based cache ops don't require an SMP call, then
* use them exclusively for small flushes.
*/
size = end - start;
cache_size = icache_size;
if (!cpu_has_ic_fills_f_dc) {
size *= 2;
cache_size += dcache_size;
}
if (size <= cache_size)
args.type &= ~R4K_INDEX;
}
r4k_on_each_cpu(args.type, local_r4k_flush_icache_range_ipi, &args);
preempt_enable();
instruction_hazard();
}
static void r4k_flush_icache_range(unsigned long start, unsigned long end)
{
return __r4k_flush_icache_range(start, end, false);
}
static void r4k_flush_icache_user_range(unsigned long start, unsigned long end)
{
return __r4k_flush_icache_range(start, end, true);
}
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
{
/* Catch bad driver code */
BUG_ON(size == 0);
preempt_disable();
if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
else
blast_scache_range(addr, addr + size);
MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches [ 1.904000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.908000] Modules linked in: [ 1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1 [ 1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4 0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000 ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8 0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000 980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518 980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c 0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758 ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c ... [ 2.028000] Call Trace: [ 2.032000] [<ffffffff8020be98>] show_stack+0x80/0x98 [ 2.036000] [<ffffffff805f2f6c>] __schedule_bug+0x44/0x6c [ 2.040000] [<ffffffff805fac58>] __schedule+0x518/0x5b0 [ 2.044000] [<ffffffff805f8a58>] schedule_timeout+0x128/0x1f0 [ 2.048000] [<ffffffff80240314>] msleep+0x3c/0x60 [ 2.052000] [<ffffffff80495400>] do_probe+0x238/0x3a8 [ 2.056000] [<ffffffff804958b0>] ide_probe_port+0x340/0x7e8 [ 2.060000] [<ffffffff80496028>] ide_host_register+0x2d0/0x7a8 [ 2.064000] [<ffffffff8049c65c>] ide_pci_init_two+0x4e4/0x790 [ 2.068000] [<ffffffff8049f9b8>] amd74xx_probe+0x148/0x2c8 [ 2.072000] [<ffffffff803f571c>] pci_device_probe+0xc4/0x130 [ 2.076000] [<ffffffff80478f60>] driver_probe_device+0x98/0x270 [ 2.080000] [<ffffffff80479298>] __driver_attach+0xe0/0xe8 [ 2.084000] [<ffffffff80476ab0>] bus_for_each_dev+0x78/0xe0 [ 2.088000] [<ffffffff80478468>] bus_add_driver+0x230/0x310 [ 2.092000] [<ffffffff80479b44>] driver_register+0x84/0x158 [ 2.096000] [<ffffffff80200504>] do_one_initcall+0x104/0x160 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/5941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-02 14:03:03 +08:00
preempt_enable();
__sync();
return;
}
/*
* Either no secondary cache or the available caches don't have the
* subset property so we have to flush the primary caches
* explicitly
*/
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
blast_dcache_range(addr, addr + size);
}
preempt_enable();
bc_wback_inv(addr, size);
__sync();
}
static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
{
/* Catch bad driver code */
BUG_ON(size == 0);
preempt_disable();
if (cpu_has_inclusive_pcaches) {
if (size >= scache_size)
r4k_blast_scache();
else {
/*
* There is no clearly documented alignment requirement
* for the cache instruction on MIPS processors and
* some processors, among them the RM5200 and RM7000
* QED processors will throw an address error for cache
* hit ops with insufficient alignment. Solved by
* aligning the address to cache line size.
*/
blast_inv_scache_range(addr, addr + size);
}
MIPS: Fix forgotten preempt_enable() when CPU has inclusive pcaches [ 1.904000] BUG: scheduling while atomic: swapper/1/0x00000002 [ 1.908000] Modules linked in: [ 1.916000] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc2-lemote-los.git-5318619-dirty #1 [ 1.920000] Stack : 0000000031aac000 ffffffff810d0000 0000000000000052 ffffffff802730a4 0000000000000000 0000000000000001 ffffffff810cdf90 ffffffff810d0000 ffffffff8068b968 ffffffff806f5537 ffffffff810cdf90 980000009f0782e8 0000000000000001 ffffffff80720000 ffffffff806b0000 980000009f078000 980000009f290000 ffffffff805f312c 980000009f05b5d8 ffffffff80233518 980000009f05b5e8 ffffffff80274b7c 980000009f078000 ffffffff8068b968 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 980000009f05b520 0000000000000000 ffffffff805f2f6c 0000000000000000 ffffffff80700000 ffffffff80700000 ffffffff806fc758 ffffffff80700000 ffffffff8020be98 ffffffff806fceb0 ffffffff805f2f6c ... [ 2.028000] Call Trace: [ 2.032000] [<ffffffff8020be98>] show_stack+0x80/0x98 [ 2.036000] [<ffffffff805f2f6c>] __schedule_bug+0x44/0x6c [ 2.040000] [<ffffffff805fac58>] __schedule+0x518/0x5b0 [ 2.044000] [<ffffffff805f8a58>] schedule_timeout+0x128/0x1f0 [ 2.048000] [<ffffffff80240314>] msleep+0x3c/0x60 [ 2.052000] [<ffffffff80495400>] do_probe+0x238/0x3a8 [ 2.056000] [<ffffffff804958b0>] ide_probe_port+0x340/0x7e8 [ 2.060000] [<ffffffff80496028>] ide_host_register+0x2d0/0x7a8 [ 2.064000] [<ffffffff8049c65c>] ide_pci_init_two+0x4e4/0x790 [ 2.068000] [<ffffffff8049f9b8>] amd74xx_probe+0x148/0x2c8 [ 2.072000] [<ffffffff803f571c>] pci_device_probe+0xc4/0x130 [ 2.076000] [<ffffffff80478f60>] driver_probe_device+0x98/0x270 [ 2.080000] [<ffffffff80479298>] __driver_attach+0xe0/0xe8 [ 2.084000] [<ffffffff80476ab0>] bus_for_each_dev+0x78/0xe0 [ 2.088000] [<ffffffff80478468>] bus_add_driver+0x230/0x310 [ 2.092000] [<ffffffff80479b44>] driver_register+0x84/0x158 [ 2.096000] [<ffffffff80200504>] do_one_initcall+0x104/0x160 Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: linux-mips@linux-mips.org Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Patchwork: https://patchwork.linux-mips.org/patch/5941/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-02 14:03:03 +08:00
preempt_enable();
__sync();
return;
}
if (size >= dcache_size) {
r4k_blast_dcache();
} else {
R4600_HIT_CACHEOP_WAR_IMPL;
blast_inv_dcache_range(addr, addr + size);
}
preempt_enable();
bc_inv(addr, size);
__sync();
}
#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
struct flush_cache_sigtramp_args {
struct mm_struct *mm;
struct page *page;
unsigned long addr;
};
/*
* While we're protected against bad userland addresses we don't care
* very much about what happens in that case. Usually a segmentation
* fault will dump the process later on anyway ...
*/
static void local_r4k_flush_cache_sigtramp(void *args)
{
struct flush_cache_sigtramp_args *fcs_args = args;
unsigned long addr = fcs_args->addr;
struct page *page = fcs_args->page;
struct mm_struct *mm = fcs_args->mm;
int map_coherent = 0;
void *vaddr;
unsigned long ic_lsize = cpu_icache_line_size();
unsigned long dc_lsize = cpu_dcache_line_size();
unsigned long sc_lsize = cpu_scache_line_size();
/*
* If owns no valid ASID yet, cannot possibly have gotten
* this page into the cache.
*/
MIPS: c-r4k: Fix valid ASID optimisation Several cache operations are optimised to return early from the SMP call handler if the memory map in question has no valid ASID on the current CPU, or any online CPU in the case of MIPS_MT_SMP. The idea is that if a memory map has never been used on a CPU it shouldn't have cache lines in need of flushing. However this doesn't cover all cases when ASIDs for other CPUs need to be checked: - Offline VPEs may have recently been online and brought lines into the (shared) cache, so they should also be checked, rather than only online CPUs. - SMP systems with a Coherence Manager (CM), but with MT disabled still have globalized hit cache ops, but don't use SMP calls, so all present CPUs should be taken into account. - R6 systems have a different multithreading implementation, so MIPS_MT_SMP won't be set, but as above may still have a CM which globalizes hit cache ops. Additionally for non-globalized cache operations where an SMP call to a single VPE in each foreign core is used, it is not necessary to check every CPU in the system, only sibling CPUs sharing the same first level cache. Fix this by making has_valid_asid() take a cache op type argument like r4k_on_each_cpu(), so it can determine whether r4k_on_each_cpu() will have done SMP calls to other cores. It can then determine which set of CPUs to check the ASIDs of based on that, excluding foreign CPUs if an SMP call will have been performed. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13804/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-07-13 21:12:51 +08:00
if (!has_valid_asid(mm, R4K_HIT))
return;
if (mm == current->active_mm) {
vaddr = NULL;
} else {
/*
* Use kmap_coherent or kmap_atomic to do flushes for
* another ASID than the current one.
*/
map_coherent = (cpu_has_dc_aliases &&
page_mapcount(page) &&
!Page_dcache_dirty(page));
if (map_coherent)
vaddr = kmap_coherent(page, addr);
else
vaddr = kmap_atomic(page);
addr = (unsigned long)vaddr + (addr & ~PAGE_MASK);
}
R4600_HIT_CACHEOP_WAR_IMPL;
if (!cpu_has_ic_fills_f_dc) {
if (dc_lsize)
vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
: protected_writeback_dcache_line(
addr & ~(dc_lsize - 1));
if (!cpu_icache_snoops_remote_store && scache_size)
vaddr ? flush_scache_line(addr & ~(sc_lsize - 1))
: protected_writeback_scache_line(
addr & ~(sc_lsize - 1));
}
if (ic_lsize)
vaddr ? flush_icache_line(addr & ~(ic_lsize - 1))
: protected_flush_icache_line(addr & ~(ic_lsize - 1));
if (vaddr) {
if (map_coherent)
kunmap_coherent();
else
kunmap_atomic(vaddr);
}
if (MIPS4K_ICACHE_REFILL_WAR) {
__asm__ __volatile__ (
".set push\n\t"
".set noat\n\t"
".set "MIPS_ISA_LEVEL"\n\t"
#ifdef CONFIG_32BIT
"la $at,1f\n\t"
#endif
#ifdef CONFIG_64BIT
"dla $at,1f\n\t"
#endif
"cache %0,($at)\n\t"
"nop; nop; nop\n"
"1:\n\t"
".set pop"
:
: "i" (Hit_Invalidate_I));
}
if (MIPS_CACHE_SYNC_WAR)
__asm__ __volatile__ ("sync");
}
static void r4k_flush_cache_sigtramp(unsigned long addr)
{
struct flush_cache_sigtramp_args args;
int npages;
down_read(&current->mm->mmap_sem);
npages = get_user_pages_fast(addr, 1, 0, &args.page);
if (npages < 1)
goto out;
args.mm = current->mm;
args.addr = addr;
r4k_on_each_cpu(R4K_HIT, local_r4k_flush_cache_sigtramp, &args);
put_page(args.page);
out:
up_read(&current->mm->mmap_sem);
}
static void r4k_flush_icache_all(void)
{
if (cpu_has_vtag_icache)
r4k_blast_icache();
}
struct flush_kernel_vmap_range_args {
unsigned long vaddr;
int size;
};
static inline void local_r4k_flush_kernel_vmap_range_index(void *args)
{
/*
* Aliases only affect the primary caches so don't bother with
* S-caches or T-caches.
*/
r4k_blast_dcache();
}
static inline void local_r4k_flush_kernel_vmap_range(void *args)
{
struct flush_kernel_vmap_range_args *vmra = args;
unsigned long vaddr = vmra->vaddr;
int size = vmra->size;
/*
* Aliases only affect the primary caches so don't bother with
* S-caches or T-caches.
*/
R4600_HIT_CACHEOP_WAR_IMPL;
blast_dcache_range(vaddr, vaddr + size);
}
static void r4k_flush_kernel_vmap_range(unsigned long vaddr, int size)
{
struct flush_kernel_vmap_range_args args;
args.vaddr = (unsigned long) vaddr;
args.size = size;
if (size >= dcache_size)
r4k_on_each_cpu(R4K_INDEX,
local_r4k_flush_kernel_vmap_range_index, NULL);
else
r4k_on_each_cpu(R4K_HIT, local_r4k_flush_kernel_vmap_range,
&args);
}
static inline void rm7k_erratum31(void)
{
const unsigned long ic_lsize = 32;
unsigned long addr;
/* RM7000 erratum #31. The icache is screwed at startup. */
write_c0_taglo(0);
write_c0_taghi(0);
for (addr = INDEX_BASE; addr <= INDEX_BASE + 4096; addr += ic_lsize) {
__asm__ __volatile__ (
".set push\n\t"
".set noreorder\n\t"
".set mips3\n\t"
"cache\t%1, 0(%0)\n\t"
"cache\t%1, 0x1000(%0)\n\t"
"cache\t%1, 0x2000(%0)\n\t"
"cache\t%1, 0x3000(%0)\n\t"
"cache\t%2, 0(%0)\n\t"
"cache\t%2, 0x1000(%0)\n\t"
"cache\t%2, 0x2000(%0)\n\t"
"cache\t%2, 0x3000(%0)\n\t"
"cache\t%1, 0(%0)\n\t"
"cache\t%1, 0x1000(%0)\n\t"
"cache\t%1, 0x2000(%0)\n\t"
"cache\t%1, 0x3000(%0)\n\t"
".set pop\n"
:
: "r" (addr), "i" (Index_Store_Tag_I), "i" (Fill));
}
}
static inline int alias_74k_erratum(struct cpuinfo_mips *c)
{
unsigned int imp = c->processor_id & PRID_IMP_MASK;
unsigned int rev = c->processor_id & PRID_REV_MASK;
int present = 0;
/*
* Early versions of the 74K do not update the cache tags on a
* vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG
* aliases. In this case it is better to treat the cache as always
* having aliases. Also disable the synonym tag update feature
* where available. In this case no opportunistic tag update will
* happen where a load causes a virtual address miss but a physical
* address hit during a D-cache look-up.
*/
switch (imp) {
case PRID_IMP_74K:
if (rev <= PRID_REV_ENCODE_332(2, 4, 0))
present = 1;
if (rev == PRID_REV_ENCODE_332(2, 4, 0))
write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
break;
case PRID_IMP_1074K:
if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) {
present = 1;
write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND);
}
break;
default:
BUG();
}
return present;
}
static void b5k_instruction_hazard(void)
{
__sync();
__sync();
__asm__ __volatile__(
" nop; nop; nop; nop; nop; nop; nop; nop\n"
" nop; nop; nop; nop; nop; nop; nop; nop\n"
" nop; nop; nop; nop; nop; nop; nop; nop\n"
" nop; nop; nop; nop; nop; nop; nop; nop\n"
: : : "memory");
}
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static char *way_string[] = { NULL, "direct mapped", "2-way",
"3-way", "4-way", "5-way", "6-way", "7-way", "8-way",
"9-way", "10-way", "11-way", "12-way",
"13-way", "14-way", "15-way", "16-way",
};
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void probe_pcache(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
unsigned int config = read_c0_config();
unsigned int prid = read_c0_prid();
int has_74k_erratum = 0;
unsigned long config1;
unsigned int lsize;
switch (current_cpu_type()) {
case CPU_R4600: /* QED style two way caches? */
case CPU_R4700:
case CPU_R5000:
case CPU_NEVADA:
icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 2;
c->icache.waybit = __ffs(icache_size/2);
dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 2;
c->dcache.waybit= __ffs(dcache_size/2);
c->options |= MIPS_CPU_CACHE_CDEX_P;
break;
case CPU_R5432:
case CPU_R5500:
icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 2;
c->icache.waybit= 0;
dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 2;
c->dcache.waybit = 0;
c->options |= MIPS_CPU_CACHE_CDEX_P | MIPS_CPU_PREFETCH;
break;
case CPU_TX49XX:
icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 4;
c->icache.waybit= 0;
dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 4;
c->dcache.waybit = 0;
c->options |= MIPS_CPU_CACHE_CDEX_P;
c->options |= MIPS_CPU_PREFETCH;
break;
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4400PC:
case CPU_R4400SC:
case CPU_R4400MC:
case CPU_R4300:
icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 1;
c->icache.waybit = 0; /* doesn't matter */
dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 1;
c->dcache.waybit = 0; /* does not matter */
c->options |= MIPS_CPU_CACHE_CDEX_P;
break;
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_R16000:
icache_size = 1 << (12 + ((config & R10K_CONF_IC) >> 29));
c->icache.linesz = 64;
c->icache.ways = 2;
c->icache.waybit = 0;
dcache_size = 1 << (12 + ((config & R10K_CONF_DC) >> 26));
c->dcache.linesz = 32;
c->dcache.ways = 2;
c->dcache.waybit = 0;
c->options |= MIPS_CPU_PREFETCH;
break;
case CPU_VR4133:
write_c0_config(config & ~VR41_CONF_P4K);
case CPU_VR4131:
/* Workaround for cache instruction bug of VR4131 */
if (c->processor_id == 0x0c80U || c->processor_id == 0x0c81U ||
c->processor_id == 0x0c82U) {
config |= 0x00400000U;
if (c->processor_id == 0x0c80U)
config |= VR41_CONF_BP;
write_c0_config(config);
} else
c->options |= MIPS_CPU_CACHE_CDEX_P;
icache_size = 1 << (10 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 2;
c->icache.waybit = __ffs(icache_size/2);
dcache_size = 1 << (10 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 2;
c->dcache.waybit = __ffs(dcache_size/2);
break;
case CPU_VR41XX:
case CPU_VR4111:
case CPU_VR4121:
case CPU_VR4122:
case CPU_VR4181:
case CPU_VR4181A:
icache_size = 1 << (10 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 1;
c->icache.waybit = 0; /* doesn't matter */
dcache_size = 1 << (10 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 1;
c->dcache.waybit = 0; /* does not matter */
c->options |= MIPS_CPU_CACHE_CDEX_P;
break;
case CPU_RM7000:
rm7k_erratum31();
icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
c->icache.ways = 4;
c->icache.waybit = __ffs(icache_size / c->icache.ways);
dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
c->dcache.ways = 4;
c->dcache.waybit = __ffs(dcache_size / c->dcache.ways);
c->options |= MIPS_CPU_CACHE_CDEX_P;
c->options |= MIPS_CPU_PREFETCH;
break;
case CPU_LOONGSON2:
icache_size = 1 << (12 + ((config & CONF_IC) >> 9));
c->icache.linesz = 16 << ((config & CONF_IB) >> 5);
if (prid & 0x3)
c->icache.ways = 4;
else
c->icache.ways = 2;
c->icache.waybit = 0;
dcache_size = 1 << (12 + ((config & CONF_DC) >> 6));
c->dcache.linesz = 16 << ((config & CONF_DB) >> 4);
if (prid & 0x3)
c->dcache.ways = 4;
else
c->dcache.ways = 2;
c->dcache.waybit = 0;
break;
case CPU_LOONGSON3:
config1 = read_c0_config1();
lsize = (config1 >> 19) & 7;
if (lsize)
c->icache.linesz = 2 << lsize;
else
c->icache.linesz = 0;
c->icache.sets = 64 << ((config1 >> 22) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
icache_size = c->icache.sets *
c->icache.ways *
c->icache.linesz;
c->icache.waybit = 0;
lsize = (config1 >> 10) & 7;
if (lsize)
c->dcache.linesz = 2 << lsize;
else
c->dcache.linesz = 0;
c->dcache.sets = 64 << ((config1 >> 13) & 7);
c->dcache.ways = 1 + ((config1 >> 7) & 7);
dcache_size = c->dcache.sets *
c->dcache.ways *
c->dcache.linesz;
c->dcache.waybit = 0;
MIPS: Loongson-3: Introduce CONFIG_LOONGSON3_ENHANCEMENT New Loongson 3 CPU (since Loongson-3A R2, as opposed to Loongson-3A R1, Loongson-3B R1 and Loongson-3B R2) has many enhancements, such as FTLB, L1-VCache, EI/DI/Wait/Prefetch instruction, DSP/DSPv2 ASE, User Local register, Read-Inhibit/Execute-Inhibit, SFB (Store Fill Buffer), Fast TLB refill support, etc. This patch introduce a config option, CONFIG_LOONGSON3_ENHANCEMENT, to enable those enhancements which are not probed at run time. If you want a generic kernel to run on all Loongson 3 machines, please say 'N' here. If you want a high-performance kernel to run on new Loongson 3 machines only, please say 'Y' here. Some additional explanations: 1) SFB locates between core and L1 cache, it causes memory access out of order, so writel/outl (and other similar functions) need a I/O reorder barrier. 2) Loongson 3 has a bug that di instruction can not save the irqflag, so arch_local_irq_save() is modified. Since CPU_MIPSR2 is selected by CONFIG_LOONGSON3_ENHANCEMENT, generic kernel doesn't use ei/di at all. 3) CPU_HAS_PREFETCH is selected by CONFIG_LOONGSON3_ENHANCEMENT, so MIPS_CPU_PREFETCH (used by uasm) probing is also put in this patch. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Steven J . Hill <sjhill@realitydiluted.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12755/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-03-03 09:45:13 +08:00
if ((prid & PRID_REV_MASK) >= PRID_REV_LOONGSON3A_R2)
c->options |= MIPS_CPU_PREFETCH;
break;
case CPU_CAVIUM_OCTEON3:
/* For now lie about the number of ways. */
c->icache.linesz = 128;
c->icache.sets = 16;
c->icache.ways = 8;
c->icache.flags |= MIPS_CACHE_VTAG;
icache_size = c->icache.sets * c->icache.ways * c->icache.linesz;
c->dcache.linesz = 128;
c->dcache.ways = 8;
c->dcache.sets = 8;
dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz;
c->options |= MIPS_CPU_PREFETCH;
break;
default:
if (!(config & MIPS_CONF_M))
panic("Don't know how to probe P-caches on this cpu.");
/*
* So we seem to be a MIPS32 or MIPS64 CPU
* So let's probe the I-cache ...
*/
config1 = read_c0_config1();
lsize = (config1 >> 19) & 7;
/* IL == 7 is reserved */
if (lsize == 7)
panic("Invalid icache line size");
c->icache.linesz = lsize ? 2 << lsize : 0;
c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
c->icache.ways = 1 + ((config1 >> 16) & 7);
icache_size = c->icache.sets *
c->icache.ways *
c->icache.linesz;
c->icache.waybit = __ffs(icache_size/c->icache.ways);
if (config & MIPS_CONF_VI)
c->icache.flags |= MIPS_CACHE_VTAG;
/*
* Now probe the MIPS32 / MIPS64 data cache.
*/
c->dcache.flags = 0;
lsize = (config1 >> 10) & 7;
/* DL == 7 is reserved */
if (lsize == 7)
panic("Invalid dcache line size");
c->dcache.linesz = lsize ? 2 << lsize : 0;
c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
c->dcache.ways = 1 + ((config1 >> 7) & 7);
dcache_size = c->dcache.sets *
c->dcache.ways *
c->dcache.linesz;
c->dcache.waybit = __ffs(dcache_size/c->dcache.ways);
c->options |= MIPS_CPU_PREFETCH;
break;
}
/*
* Processor configuration sanity check for the R4000SC erratum
* #5. With page sizes larger than 32kB there is no possibility
* to get a VCE exception anymore so we don't care about this
* misconfiguration. The case is rather theoretical anyway;
* presumably no vendor is shipping his hardware in the "bad"
* configuration.
*/
if ((prid & PRID_IMP_MASK) == PRID_IMP_R4000 &&
(prid & PRID_REV_MASK) < PRID_REV_R4400 &&
!(config & CONF_SC) && c->icache.linesz != 16 &&
PAGE_SIZE <= 0x8000)
panic("Improper R4000SC processor configuration detected");
/* compute a couple of other cache variables */
c->icache.waysize = icache_size / c->icache.ways;
c->dcache.waysize = dcache_size / c->dcache.ways;
c->icache.sets = c->icache.linesz ?
icache_size / (c->icache.linesz * c->icache.ways) : 0;
c->dcache.sets = c->dcache.linesz ?
dcache_size / (c->dcache.linesz * c->dcache.ways) : 0;
/*
* R1x000 P-caches are odd in a positive way. They're 32kB 2-way
* virtually indexed so normally would suffer from aliases. So
* normally they'd suffer from aliases but magic in the hardware deals
* with that for us so we don't need to take care ourselves.
*/
switch (current_cpu_type()) {
case CPU_20KC:
case CPU_25KF:
case CPU_I6400:
case CPU_I6500:
case CPU_SB1:
case CPU_SB1A:
case CPU_XLR:
c->dcache.flags |= MIPS_CACHE_PINDEX;
break;
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_R16000:
break;
case CPU_74K:
case CPU_1074K:
has_74k_erratum = alias_74k_erratum(c);
/* Fall through. */
case CPU_M14KC:
case CPU_M14KEC:
case CPU_24K:
case CPU_34K:
case CPU_1004K:
case CPU_INTERAPTIV:
case CPU_P5600:
case CPU_PROAPTIV:
case CPU_M5150:
case CPU_QEMU_GENERIC:
case CPU_P6600:
case CPU_M6250:
if (!(read_c0_config7() & MIPS_CONF7_IAR) &&
(c->icache.waysize > PAGE_SIZE))
c->icache.flags |= MIPS_CACHE_ALIASES;
if (!has_74k_erratum && (read_c0_config7() & MIPS_CONF7_AR)) {
/*
* Effectively physically indexed dcache,
* thus no virtual aliases.
*/
c->dcache.flags |= MIPS_CACHE_PINDEX;
break;
}
default:
if (has_74k_erratum || c->dcache.waysize > PAGE_SIZE)
c->dcache.flags |= MIPS_CACHE_ALIASES;
}
/* Physically indexed caches don't suffer from virtual aliasing */
if (c->dcache.flags & MIPS_CACHE_PINDEX)
c->dcache.flags &= ~MIPS_CACHE_ALIASES;
switch (current_cpu_type()) {
case CPU_20KC:
/*
* Some older 20Kc chips doesn't have the 'VI' bit in
* the config register.
*/
c->icache.flags |= MIPS_CACHE_VTAG;
break;
case CPU_ALCHEMY:
case CPU_I6400:
case CPU_I6500:
c->icache.flags |= MIPS_CACHE_IC_F_DC;
break;
case CPU_BMIPS5000:
c->icache.flags |= MIPS_CACHE_IC_F_DC;
/* Cache aliases are handled in hardware; allow HIGHMEM */
c->dcache.flags &= ~MIPS_CACHE_ALIASES;
break;
case CPU_LOONGSON2:
/*
* LOONGSON2 has 4 way icache, but when using indexed cache op,
* one op will act on all 4 ways
*/
c->icache.ways = 1;
}
printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
icache_size >> 10,
c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
way_string[c->icache.ways], c->icache.linesz);
printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
dcache_size >> 10, way_string[c->dcache.ways],
(c->dcache.flags & MIPS_CACHE_PINDEX) ? "PIPT" : "VIPT",
(c->dcache.flags & MIPS_CACHE_ALIASES) ?
"cache aliases" : "no aliases",
c->dcache.linesz);
}
static void probe_vcache(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
unsigned int config2, lsize;
if (current_cpu_type() != CPU_LOONGSON3)
return;
config2 = read_c0_config2();
if ((lsize = ((config2 >> 20) & 15)))
c->vcache.linesz = 2 << lsize;
else
c->vcache.linesz = lsize;
c->vcache.sets = 64 << ((config2 >> 24) & 15);
c->vcache.ways = 1 + ((config2 >> 16) & 15);
vcache_size = c->vcache.sets * c->vcache.ways * c->vcache.linesz;
c->vcache.waybit = 0;
c->vcache.waysize = vcache_size / c->vcache.ways;
pr_info("Unified victim cache %ldkB %s, linesize %d bytes.\n",
vcache_size >> 10, way_string[c->vcache.ways], c->vcache.linesz);
}
/*
* If you even _breathe_ on this function, look at the gcc output and make sure
* it does not pop things on and off the stack for the cache sizing loop that
* executes in KSEG1 space or else you will crash and burn badly. You have
* been warned.
*/
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static int probe_scache(void)
{
unsigned long flags, addr, begin, end, pow2;
unsigned int config = read_c0_config();
struct cpuinfo_mips *c = &current_cpu_data;
if (config & CONF_SC)
return 0;
begin = (unsigned long) &_stext;
begin &= ~((4 * 1024 * 1024) - 1);
end = begin + (4 * 1024 * 1024);
/*
* This is such a bitch, you'd think they would make it easy to do
* this. Away you daemons of stupidity!
*/
local_irq_save(flags);
/* Fill each size-multiple cache line with a valid tag. */
pow2 = (64 * 1024);
for (addr = begin; addr < end; addr = (begin + pow2)) {
unsigned long *p = (unsigned long *) addr;
__asm__ __volatile__("nop" : : "r" (*p)); /* whee... */
pow2 <<= 1;
}
/* Load first line with zero (therefore invalid) tag. */
write_c0_taglo(0);
write_c0_taghi(0);
__asm__ __volatile__("nop; nop; nop; nop;"); /* avoid the hazard */
cache_op(Index_Store_Tag_I, begin);
cache_op(Index_Store_Tag_D, begin);
cache_op(Index_Store_Tag_SD, begin);
/* Now search for the wrap around point. */
pow2 = (128 * 1024);
for (addr = begin + (128 * 1024); addr < end; addr = begin + pow2) {
cache_op(Index_Load_Tag_SD, addr);
__asm__ __volatile__("nop; nop; nop; nop;"); /* hazard... */
if (!read_c0_taglo())
break;
pow2 <<= 1;
}
local_irq_restore(flags);
addr -= begin;
scache_size = addr;
c->scache.linesz = 16 << ((config & R4K_CONF_SB) >> 22);
c->scache.ways = 1;
c->scache.waybit = 0; /* does not matter */
return 1;
}
static void __init loongson2_sc_init(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
scache_size = 512*1024;
c->scache.linesz = 32;
c->scache.ways = 4;
c->scache.waybit = 0;
c->scache.waysize = scache_size / (c->scache.ways);
c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways);
pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
scache_size >> 10, way_string[c->scache.ways], c->scache.linesz);
c->options |= MIPS_CPU_INCLUSIVE_CACHES;
}
static void __init loongson3_sc_init(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
unsigned int config2, lsize;
config2 = read_c0_config2();
lsize = (config2 >> 4) & 15;
if (lsize)
c->scache.linesz = 2 << lsize;
else
c->scache.linesz = 0;
c->scache.sets = 64 << ((config2 >> 8) & 15);
c->scache.ways = 1 + (config2 & 15);
scache_size = c->scache.sets *
c->scache.ways *
c->scache.linesz;
/* Loongson-3 has 4 cores, 1MB scache for each. scaches are shared */
scache_size *= 4;
c->scache.waybit = 0;
c->scache.waysize = scache_size / c->scache.ways;
pr_info("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
scache_size >> 10, way_string[c->scache.ways], c->scache.linesz);
if (scache_size)
c->options |= MIPS_CPU_INCLUSIVE_CACHES;
return;
}
extern int r5k_sc_init(void);
extern int rm7k_sc_init(void);
extern int mips_sc_init(void);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void setup_scache(void)
{
struct cpuinfo_mips *c = &current_cpu_data;
unsigned int config = read_c0_config();
int sc_present = 0;
/*
* Do the probing thing on R4000SC and R4400SC processors. Other
* processors don't have a S-cache that would be relevant to the
* Linux memory management.
*/
switch (current_cpu_type()) {
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4400SC:
case CPU_R4400MC:
sc_present = run_uncached(probe_scache);
if (sc_present)
c->options |= MIPS_CPU_CACHE_CDEX_S;
break;
case CPU_R10000:
case CPU_R12000:
case CPU_R14000:
case CPU_R16000:
scache_size = 0x80000 << ((config & R10K_CONF_SS) >> 16);
c->scache.linesz = 64 << ((config >> 13) & 1);
c->scache.ways = 2;
c->scache.waybit= 0;
sc_present = 1;
break;
case CPU_R5000:
case CPU_NEVADA:
#ifdef CONFIG_R5000_CPU_SCACHE
r5k_sc_init();
#endif
return;
case CPU_RM7000:
#ifdef CONFIG_RM7000_CPU_SCACHE
rm7k_sc_init();
#endif
return;
case CPU_LOONGSON2:
loongson2_sc_init();
return;
case CPU_LOONGSON3:
loongson3_sc_init();
return;
case CPU_CAVIUM_OCTEON3:
case CPU_XLP:
/* don't need to worry about L2, fully coherent */
return;
default:
if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)) {
#ifdef CONFIG_MIPS_CPU_SCACHE
if (mips_sc_init ()) {
scache_size = c->scache.ways * c->scache.sets * c->scache.linesz;
printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
scache_size >> 10,
way_string[c->scache.ways], c->scache.linesz);
}
#else
if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT))
panic("Dunno how to handle MIPS32 / MIPS64 second level cache");
#endif
return;
}
sc_present = 0;
}
if (!sc_present)
return;
/* compute a couple of other cache variables */
c->scache.waysize = scache_size / c->scache.ways;
c->scache.sets = scache_size / (c->scache.linesz * c->scache.ways);
printk("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
scache_size >> 10, way_string[c->scache.ways], c->scache.linesz);
c->options |= MIPS_CPU_INCLUSIVE_CACHES;
}
void au1x00_fixup_config_od(void)
{
/*
* c0_config.od (bit 19) was write only (and read as 0)
* on the early revisions of Alchemy SOCs. It disables the bus
* transaction overlapping and needs to be set to fix various errata.
*/
switch (read_c0_prid()) {
case 0x00030100: /* Au1000 DA */
case 0x00030201: /* Au1000 HA */
case 0x00030202: /* Au1000 HB */
case 0x01030200: /* Au1500 AB */
/*
* Au1100 errata actually keeps silence about this bit, so we set it
* just in case for those revisions that require it to be set according
* to the (now gone) cpu table.
*/
case 0x02030200: /* Au1100 AB */
case 0x02030201: /* Au1100 BA */
case 0x02030202: /* Au1100 BC */
set_c0_config(1 << 19);
break;
}
}
/* CP0 hazard avoidance. */
#define NXP_BARRIER() \
__asm__ __volatile__( \
".set noreorder\n\t" \
"nop; nop; nop; nop; nop; nop;\n\t" \
".set reorder\n\t")
static void nxp_pr4450_fixup_config(void)
{
unsigned long config0;
config0 = read_c0_config();
/* clear all three cache coherency fields */
config0 &= ~(0x7 | (7 << 25) | (7 << 28));
config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) |
((_page_cachable_default >> _CACHE_SHIFT) << 25) |
((_page_cachable_default >> _CACHE_SHIFT) << 28));
write_c0_config(config0);
NXP_BARRIER();
}
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static int cca = -1;
static int __init cca_setup(char *str)
{
get_option(&str, &cca);
return 0;
}
early_param("cca", cca_setup);
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void coherency_setup(void)
{
if (cca < 0 || cca > 7)
cca = read_c0_config() & CONF_CM_CMASK;
_page_cachable_default = cca << _CACHE_SHIFT;
pr_debug("Using cache attribute %d\n", cca);
change_c0_config(CONF_CM_CMASK, cca);
/*
* c0_status.cu=0 specifies that updates by the sc instruction use
* the coherency mode specified by the TLB; 1 means cachable
* coherent update on write will be used. Not all processors have
* this bit and; some wire it to zero, others like Toshiba had the
* silly idea of putting something else there ...
*/
switch (current_cpu_type()) {
case CPU_R4000PC:
case CPU_R4000SC:
case CPU_R4000MC:
case CPU_R4400PC:
case CPU_R4400SC:
case CPU_R4400MC:
clear_c0_config(CONF_CU);
break;
/*
* We need to catch the early Alchemy SOCs with
* the write-only co_config.od bit and set it back to one on:
* Au1000 rev DA, HA, HB; Au1100 AB, BA, BC, Au1500 AB
*/
case CPU_ALCHEMY:
au1x00_fixup_config_od();
break;
case PRID_IMP_PR4450:
nxp_pr4450_fixup_config();
break;
}
}
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
static void r4k_cache_error_setup(void)
{
extern char __weak except_vec2_generic;
extern char __weak except_vec2_sb1;
switch (current_cpu_type()) {
case CPU_SB1:
case CPU_SB1A:
set_uncached_handler(0x100, &except_vec2_sb1, 0x80);
break;
default:
set_uncached_handler(0x100, &except_vec2_generic, 0x80);
break;
}
}
MIPS: Delete __cpuinit/__CPUINIT usage from MIPS code commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-06-18 21:38:59 +08:00
void r4k_cache_init(void)
{
extern void build_clear_page(void);
extern void build_copy_page(void);
struct cpuinfo_mips *c = &current_cpu_data;
probe_pcache();
probe_vcache();
setup_scache();
r4k_blast_dcache_page_setup();
r4k_blast_dcache_page_indexed_setup();
r4k_blast_dcache_setup();
r4k_blast_icache_page_setup();
r4k_blast_icache_page_indexed_setup();
r4k_blast_icache_setup();
r4k_blast_scache_page_setup();
r4k_blast_scache_page_indexed_setup();
r4k_blast_scache_setup();
#ifdef CONFIG_EVA
r4k_blast_dcache_user_page_setup();
r4k_blast_icache_user_page_setup();
#endif
/*
* Some MIPS32 and MIPS64 processors have physically indexed caches.
* This code supports virtually indexed processors and will be
* unnecessarily inefficient on physically indexed processors.
*/
if (c->dcache.linesz && cpu_has_dc_aliases)
shm_align_mask = max_t( unsigned long,
c->dcache.sets * c->dcache.linesz - 1,
PAGE_SIZE - 1);
else
shm_align_mask = PAGE_SIZE-1;
__flush_cache_vmap = r4k__flush_cache_vmap;
__flush_cache_vunmap = r4k__flush_cache_vunmap;
flush_cache_all = cache_noop;
__flush_cache_all = r4k___flush_cache_all;
flush_cache_mm = r4k_flush_cache_mm;
flush_cache_page = r4k_flush_cache_page;
flush_cache_range = r4k_flush_cache_range;
__flush_kernel_vmap_range = r4k_flush_kernel_vmap_range;
flush_cache_sigtramp = r4k_flush_cache_sigtramp;
flush_icache_all = r4k_flush_icache_all;
local_flush_data_cache_page = local_r4k_flush_data_cache_page;
flush_data_cache_page = r4k_flush_data_cache_page;
flush_icache_range = r4k_flush_icache_range;
local_flush_icache_range = local_r4k_flush_icache_range;
__flush_icache_user_range = r4k_flush_icache_user_range;
__local_flush_icache_user_range = local_r4k_flush_icache_user_range;
#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
# if defined(CONFIG_DMA_PERDEV_COHERENT)
if (0) {
# else
if ((coherentio == IO_COHERENCE_ENABLED) ||
((coherentio == IO_COHERENCE_DEFAULT) && hw_coherentio)) {
# endif
_dma_cache_wback_inv = (void *)cache_noop;
_dma_cache_wback = (void *)cache_noop;
_dma_cache_inv = (void *)cache_noop;
} else {
_dma_cache_wback_inv = r4k_dma_cache_wback_inv;
_dma_cache_wback = r4k_dma_cache_wback_inv;
_dma_cache_inv = r4k_dma_cache_inv;
}
#endif
build_clear_page();
build_copy_page();
/*
* We want to run CMP kernels on core with and without coherent
* caches. Therefore, do not use CONFIG_MIPS_CMP to decide whether
* or not to flush caches.
*/
local_r4k___flush_cache_all(NULL);
coherency_setup();
board_cache_error_setup = r4k_cache_error_setup;
/*
* Per-CPU overrides
*/
switch (current_cpu_type()) {
case CPU_BMIPS4350:
case CPU_BMIPS4380:
/* No IPI is needed because all CPUs share the same D$ */
flush_data_cache_page = r4k_blast_dcache_page;
break;
case CPU_BMIPS5000:
/* We lose our superpowers if L2 is disabled */
if (c->scache.flags & MIPS_CACHE_NOT_PRESENT)
break;
/* I$ fills from D$ just by emptying the write buffers */
flush_cache_page = (void *)b5k_instruction_hazard;
flush_cache_range = (void *)b5k_instruction_hazard;
flush_cache_sigtramp = (void *)b5k_instruction_hazard;
local_flush_data_cache_page = (void *)b5k_instruction_hazard;
flush_data_cache_page = (void *)b5k_instruction_hazard;
flush_icache_range = (void *)b5k_instruction_hazard;
local_flush_icache_range = (void *)b5k_instruction_hazard;
/* Optimization: an L2 flush implicitly flushes the L1 */
current_cpu_data.options |= MIPS_CPU_INCLUSIVE_CACHES;
break;
case CPU_LOONGSON3:
/* Loongson-3 maintains cache coherency by hardware */
__flush_cache_all = cache_noop;
__flush_cache_vmap = cache_noop;
__flush_cache_vunmap = cache_noop;
__flush_kernel_vmap_range = (void *)cache_noop;
flush_cache_mm = (void *)cache_noop;
flush_cache_page = (void *)cache_noop;
flush_cache_range = (void *)cache_noop;
flush_cache_sigtramp = (void *)cache_noop;
flush_icache_all = (void *)cache_noop;
flush_data_cache_page = (void *)cache_noop;
local_flush_data_cache_page = (void *)cache_noop;
break;
}
}
static int r4k_cache_pm_notifier(struct notifier_block *self, unsigned long cmd,
void *v)
{
switch (cmd) {
case CPU_PM_ENTER_FAILED:
case CPU_PM_EXIT:
coherency_setup();
break;
}
return NOTIFY_OK;
}
static struct notifier_block r4k_cache_pm_notifier_block = {
.notifier_call = r4k_cache_pm_notifier,
};
int __init r4k_cache_init_pm(void)
{
return cpu_pm_register_notifier(&r4k_cache_pm_notifier_block);
}
arch_initcall(r4k_cache_init_pm);