openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/gpu/drm/i915/i915_params.c

205 lines
8.2 KiB
C
Raw Normal View History

drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "i915_drv.h"
struct i915_params i915 __read_mostly = {
.modeset = -1,
.panel_ignore_lid = 1,
.semaphores = -1,
.lvds_channel_mode = 0,
.panel_use_ssc = -1,
.vbt_sdvo_panel_type = -1,
.enable_rc6 = -1,
drm/i915/gen9: Add boot parameter for disabling DC6 v2: Use _unsafe (Jani) v3: Allow specifying specific DC-states instead of just DC6 (Imre) Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447682467-6237-3-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-16 22:01:06 +08:00
.enable_dc = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.enable_fbc = -1,
drm/i915/bdw: Enable execlists by default where supported Execlist support in the i915 driver is now considered good enough for the feature to be enabled by default on Gen8 and later and routinely tested. Adjusted i915 parameters structure initialization to reflect this and updated the comment in intel_sanitize_enable_execlists(). There's still work to do before we can let the wider massive onto it, but there's still time left before the 3.20 cutoff. v2: Update the MODULE_PARM_DESC too. Issue: VIZ-2020 Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> [danvet: Add note that there's still some work left to do.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 20:48:35 +08:00
.enable_execlists = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.enable_hangcheck = true,
.enable_ppgtt = -1,
Revert "drm/i915: Enable PSR by default." This reverts commit b6d547791fd3ef4ccc89ad2556ab01045640aef7. The panel self refresh clearly isn't stable yet, and causes my laptop (Haswell ULT in a Sony Vaio Pro) to have the screen lock up. Maybe it doesn't ever get out of self-refresh, or maybe there are gremlins in the machine that get unhappy. Regardless, it's broken, and it gets reverted. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:48:26 +08:00
.enable_psr = 0,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.preliminary_hw_support = IS_ENABLED(CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT),
drm/i915/skl: disable display side power well support for now The display power well support on this platform is in a somewhat broken state atm, so disable it by default. This in effect will get rid of incorrect assert WARNs about the CSR/DMC firmware not being loaded during power well toggling. It also removes a problem during driver loading where a register is accessed while its backing power well is down, resulting in another WARN. Until we come up with the root cause of the second problem and the proper fix for both issues, keep all display side power wells on. Also clarify a bit the option description. Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/CAPM=9tyjBQjSBTKa49cRr6SYkpNW7Pq-fUFznZZ8Y1snvvk7mA@mail.gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446757451-2777-1-git-send-email-imre.deak@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-11-06 05:04:11 +08:00
.disable_power_well = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.enable_ips = 1,
Revert "drm/i915: skip modeset if compatible for everyone." This reverts commit 6764e9f8724f1231b4deac53b9a82286ac0830e7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes: 6764e9f8724f ("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
2015-11-19 16:26:30 +08:00
.fastboot = 0,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.prefault_disable = 0,
drm/i915: Add module param to test the load detect code This is useful for writing igts to make sure we don't break this, without being forced to own a one of these dinosaurs. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-04 01:03:47 +08:00
.load_detect_test = 0,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.reset = true,
.invert_brightness = 0,
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
.disable_display = 0,
drm/i915: Enable command parsing by default v2: rebased OTC-Tracker: AXIA-4631 Change-Id: I6747457e1fe7494bd42787af51198fcba398ad78 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Resolve tiny conflict in module option text.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:57 +08:00
.enable_cmd_parser = 1,
drm/i915: Add debug module option for VTd validation VTd has a few too many "outright disable the damn thing" workarounds accumulated and for validation we want a simple knob to make sure we disable them all. Since this is for bdw+ validation and atm we don't have any workarounds for bdw this option currently does nothing. So currently this is just a placeholder to make sure reality will match with the documented process for our validation people. v2: Fix up param description (Jani). v3: Actually git add ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01 15:33:47 +08:00
.disable_vtd_wa = 0,
drm/i915: Replaced Blitter ring based flips with MMIO flips This patch enables the framework for using MMIO based flip calls, in contrast with the CS based flip calls which are being used currently. MMIO based flip calls can be enabled on architectures where Render and Blitter engines reside in different power wells. The decision to use MMIO flips can be made based on workloads to give 100% residency for Media power well. v2: The MMIO flips now use the interrupt driven mechanism for issuing the flips when target seqno is reached. (Incorporating Ville's idea) v3: Rebasing on latest code. Code restructuring after incorporating Damien's comments v4: Addressing Ville's review comments -general cleanup -updating only base addr instead of calling update_primary_plane -extending patch for gen5+ platforms v5: Addressed Ville's review comments -Making mmio flip vs cs flip selection based on module parameter -Adding check for DRIVER_MODESET feature in notify_ring before calling notify mmio flip. -Other changes mostly in function arguments v6: -Having a seperate function to check condition for using mmio flips (Ville) -propogating error code from i915_gem_check_olr (Ville) v7: -Adding __must_check with i915_gem_check_olr (Chris) -Renaming mmio_flip_data to mmio_flip (Chris) -Rebasing on latest nightly v8: -Rebasing on latest code -squash 3rd patch in series(mmio setbase vs page flip race) with this patch -Added new tiling mode update in intel_do_mmio_flip (Chris) v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in intel_postpone_flip, as this is a more restrictive condition (Chris) v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch. These patches make the selection of CS vs MMIO flip at the page flip time, and make the module parameter for using mmio flips as tristate, the states being 'force CS flips', 'force mmio flips', 'driver discretion'. Changed the logic for driver discretion (Chris) v11: Minor code cleanup(better readability, fixing whitespace errors, using lockdep to check mutex locked status in postpone_flip, removal of __must_check in function definition) (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb [danvet: Fix up parameter alignement checkpatch spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02 19:17:17 +08:00
.use_mmio_flip = 0,
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-17 04:49:29 +08:00
.mmio_debug = 0,
drm/i915: tame the chattermouth (v2) Many distro's have mechanism in place to collect and automatically file bugs for failed WARN()s. And since i915 has a lot of hw state sanity checks which result in WARN(), it generates quite a lot of noise which is somewhat disconcerting to the end user. Separate out the internal hw-is-in-the-state-I-expected checks into I915_STATE_WARN()s and allow configuration via i915.verbose_checks module param about whether this will generate a full blown stacktrace or just DRM_ERROR(). The new moduleparam defaults to true, so by default there is no change in behavior. And even when disabled, you will still get an error message logged. v2: paint the macro names blue, clarify that the default behavior remains the same as before Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-16 02:56:32 +08:00
.verbose_state_checks = 1,
Partially revert "drm/i915: Use full atomic modeset." This partially reverts commit 74c090b1bdc57b1c9f1361908cca5a3d8a80fb08. The DRIVER_ATOMIC cap cannot yet be exported because i915 lacks async support. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26 15:29:56 +08:00
.nuclear_pageflip = 0,
drm/i915/skl: Add module parameter to select edp vswing table This provides an option to override the value set by VBT for selecting edp Vswing Pre-emph setting table. v2: Adding comment about this being a temporary workaround and making the parameter read-only (Jani) v3: Changing mode to 0400 instead of 0 (Jani) https://bugs.freedesktop.org/show_bug.cgi?id=89554 Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-06 20:05:48 +08:00
.edp_vswing = 0,
drm/i915: Add GuC-related module parameters Two new module parameters: "enable_guc_submission" which will turn on submission of batchbuffers via the GuC (when implemented), and "guc_log_level" which controls the level of debugging logged by the GuC and captured by the host. Signed-off-by: Alex Dai <yu.dai@intel.com> v4: Mark "enable_guc_submission" unsafe [Daniel Vetter] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-10 02:29:03 +08:00
.enable_guc_submission = false,
.guc_log_level = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
};
module_param_named(modeset, i915.modeset, int, 0400);
MODULE_PARM_DESC(modeset,
drm/i915: Fix up KMS Kconfig removal patch The module pciid list got lost, but somehow most distros seem to force-load drm drivers early and no one noticed for a while. Bug introduced in commit fd930478fb797e4cbaa799d9ddd970e9a1fa1b4a Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 19 20:27:27 2015 +0100 drm/i915: Remove KMS Kconfig option Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-06-23 19:57:47 +08:00
"Use kernel modesetting [KMS] (0=disable, "
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"1=on, -1=force vga console preference [default])");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
"-1=force lid closed, -2=force lid open)");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync "
"(default: -1 (use per-chip defaults))");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
MODULE_PARM_DESC(enable_rc6,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
"default: -1 (use per-chip default)");
drm/i915/gen9: Add boot parameter for disabling DC6 v2: Use _unsafe (Jani) v3: Allow specifying specific DC-states instead of just DC6 (Imre) Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447682467-6237-3-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-16 22:01:06 +08:00
module_param_named_unsafe(enable_dc, i915.enable_dc, int, 0400);
MODULE_PARM_DESC(enable_dc,
"Enable power-saving display C-states. "
"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
MODULE_PARM_DESC(enable_fbc,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
drm/i915: Report an error when i915.reset prevents a reset If the user disables the GPU reset using the i915.reset parameter and one occurs, report that we failed to reset the GPU. If we return early, as we currently do, then we leave all state intact (with a hung GPU) and clients block forever waiting for their requests to complete. Testcase: igt/gem_eio Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Mark i915.reset as an unsafe modoption, as discussed with Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-18 18:42:08 +08:00
module_param_named_unsafe(reset, i915.reset, bool, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
MODULE_PARM_DESC(enable_ppgtt,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Override PPGTT usage. "
drm/i915/gen8: Flip the 48b switch Use 48b addresses if hw supports it (i915.enable_ppgtt=3). Update the sanitize_enable_ppgtt for 48 bit PPGTT mode. Note, aliasing PPGTT remains 32b only. v2: s/full_64b/full_48b/. (Akash) v3: Add sanitize_enable_ppgtt changes until here. (Akash) v4: Update param description (Chris) Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30 22:36:19 +08:00
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with extended address space)");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
drm/i915/bdw: Macro for LRCs and module option for Execlists GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts". These expanded contexts enable a number of new abilities, especially "Execlists". The macro is defined to off until we have things in place to hope to work. v2: Rename "advanced contexts" to the more correct "logical ring contexts". v3: Add a module parameter to enable execlists. Execlist are relatively new, and so it'd be wise to be able to switch back to ring submission to debug subtle problems that will inevitably arise. v4: Add an intel_enable_execlists function. v5: Sanitize early, as suggested by Daniel. Remove lrc_enabled. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v4 & v5) Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:11 +08:00
MODULE_PARM_DESC(enable_execlists,
"Override execlists usage. "
drm/i915/bdw: Enable execlists by default where supported Execlist support in the i915 driver is now considered good enough for the feature to be enabled by default on Gen8 and later and routinely tested. Adjusted i915 parameters structure initialization to reflect this and updated the comment in intel_sanitize_enable_execlists(). There's still work to do before we can let the wider massive onto it, but there's still time left before the 3.20 cutoff. v2: Update the MODULE_PARM_DESC too. Issue: VIZ-2020 Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> [danvet: Add note that there's still some work left to do.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 20:48:35 +08:00
"(-1=auto [default], 0=disabled, 1=enabled)");
drm/i915/bdw: Macro for LRCs and module option for Execlists GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts". These expanded contexts enable a number of new abilities, especially "Execlists". The macro is defined to off until we have things in place to hope to work. v2: Rename "advanced contexts" to the more correct "logical ring contexts". v3: Add a module parameter to enable execlists. Execlist are relatively new, and so it'd be wise to be able to switch back to ring submission to debug subtle problems that will inevitably arise. v4: Add an intel_enable_execlists function. v5: Sanitize early, as suggested by Daniel. Remove lrc_enabled. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v4 & v5) Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:11 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
Revert "drm/i915: Enable PSR by default." This reverts commit b6d547791fd3ef4ccc89ad2556ab01045640aef7. The panel self refresh clearly isn't stable yet, and causes my laptop (Haswell ULT in a Sony Vaio Pro) to have the screen lock up. Maybe it doesn't ever get out of self-refresh, or maybe there are gremlins in the machine that get unhappy. Regardless, it's broken, and it gets reverted. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 05:48:26 +08:00
MODULE_PARM_DESC(enable_psr, "Enable PSR (default: false)");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(preliminary_hw_support, i915.preliminary_hw_support, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(preliminary_hw_support,
"Enable preliminary hardware support.");
drm/i915: fix handling of the disable_power_well module option When this option is 0 (so the power well support is disabled) we are supposed to enable all power wells once and don't disable them unless we system suspend the device. Currently if the option is 0, we can call the power well enable handlers multiple times, whenever their refcount changes from 0->1. This may not be a problem for the HW, but it's not logical and may trigger some warnings in the power well code which doesn't expect this. So simply keep around a reference while we are not system suspended to solve this. For simplicity mark the module option read only, so we don't need to deal with re-enabling the feature during runtime. If someone really needs that it could be added later in a more proper way. v2: - fix typo in comment in intel_power_domains_suspend() (Patrik) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447775063-24438-1-git-send-email-imre.deak@intel.com
2015-11-17 23:44:23 +08:00
module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0400);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(disable_power_well,
drm/i915/skl: disable display side power well support for now The display power well support on this platform is in a somewhat broken state atm, so disable it by default. This in effect will get rid of incorrect assert WARNs about the CSR/DMC firmware not being loaded during power well toggling. It also removes a problem during driver loading where a register is accessed while its backing power well is down, resulting in another WARN. Until we come up with the root cause of the second problem and the proper fix for both issues, keep all display side power wells on. Also clarify a bit the option description. Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/CAPM=9tyjBQjSBTKa49cRr6SYkpNW7Pq-fUFznZZ8Y1snvvk7mA@mail.gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446757451-2777-1-git-send-email-imre.deak@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-11-06 05:04:11 +08:00
"Disable display power wells when possible "
"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
Revert "drm/i915: skip modeset if compatible for everyone." This reverts commit 6764e9f8724f1231b4deac53b9a82286ac0830e7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes: 6764e9f8724f ("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
2015-11-19 16:26:30 +08:00
module_param_named(fastboot, i915.fastboot, bool, 0600);
MODULE_PARM_DESC(fastboot,
"Try to skip unnecessary mode sets at boot time (default: false)");
drm/i915: Add module param to test the load detect code This is useful for writing igts to make sure we don't break this, without being forced to own a one of these dinosaurs. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-04 01:03:47 +08:00
module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(prefault_disable,
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
"For developers only.");
drm/i915: Add module param to test the load detect code This is useful for writing igts to make sure we don't break this, without being forced to own a one of these dinosaurs. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-04 01:03:47 +08:00
module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600);
MODULE_PARM_DESC(load_detect_test,
"Force-enable the VGA load detect code for testing (default:false). "
"For developers only.");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(invert_brightness,
"Invert backlight brightness "
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
"report PCI device ID, subsystem vendor and subsystem device ID "
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
"It will then be included in an upcoming module version.");
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
module_param_named(disable_display, i915.disable_display, bool, 0600);
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
drm/i915: Implement command buffer parsing logic The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:46 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(disable_vtd_wa, i915.disable_vtd_wa, bool, 0600);
drm/i915: Add debug module option for VTd validation VTd has a few too many "outright disable the damn thing" workarounds accumulated and for validation we want a simple knob to make sure we disable them all. Since this is for bdw+ validation and atm we don't have any workarounds for bdw this option currently does nothing. So currently this is just a placeholder to make sure reality will match with the documented process for our validation people. v2: Fix up param description (Jani). v3: Actually git add ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-01 15:33:47 +08:00
MODULE_PARM_DESC(disable_vtd_wa, "Disable all VT-d workarounds (default: false)");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
drm/i915: Implement command buffer parsing logic The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:46 +08:00
MODULE_PARM_DESC(enable_cmd_parser,
drm/i915: Enable command parsing by default v2: rebased OTC-Tracker: AXIA-4631 Change-Id: I6747457e1fe7494bd42787af51198fcba398ad78 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Resolve tiny conflict in module option text.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:57 +08:00
"Enable command parsing (1=enabled [default], 0=disabled)");
drm/i915: Replaced Blitter ring based flips with MMIO flips This patch enables the framework for using MMIO based flip calls, in contrast with the CS based flip calls which are being used currently. MMIO based flip calls can be enabled on architectures where Render and Blitter engines reside in different power wells. The decision to use MMIO flips can be made based on workloads to give 100% residency for Media power well. v2: The MMIO flips now use the interrupt driven mechanism for issuing the flips when target seqno is reached. (Incorporating Ville's idea) v3: Rebasing on latest code. Code restructuring after incorporating Damien's comments v4: Addressing Ville's review comments -general cleanup -updating only base addr instead of calling update_primary_plane -extending patch for gen5+ platforms v5: Addressed Ville's review comments -Making mmio flip vs cs flip selection based on module parameter -Adding check for DRIVER_MODESET feature in notify_ring before calling notify mmio flip. -Other changes mostly in function arguments v6: -Having a seperate function to check condition for using mmio flips (Ville) -propogating error code from i915_gem_check_olr (Ville) v7: -Adding __must_check with i915_gem_check_olr (Chris) -Renaming mmio_flip_data to mmio_flip (Chris) -Rebasing on latest nightly v8: -Rebasing on latest code -squash 3rd patch in series(mmio setbase vs page flip race) with this patch -Added new tiling mode update in intel_do_mmio_flip (Chris) v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in intel_postpone_flip, as this is a more restrictive condition (Chris) v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch. These patches make the selection of CS vs MMIO flip at the page flip time, and make the module parameter for using mmio flips as tristate, the states being 'force CS flips', 'force mmio flips', 'driver discretion'. Changed the logic for driver discretion (Chris) v11: Minor code cleanup(better readability, fixing whitespace errors, using lockdep to check mutex locked status in postpone_flip, removal of __must_check in function definition) (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb [danvet: Fix up parameter alignement checkpatch spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02 19:17:17 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
drm/i915: Replaced Blitter ring based flips with MMIO flips This patch enables the framework for using MMIO based flip calls, in contrast with the CS based flip calls which are being used currently. MMIO based flip calls can be enabled on architectures where Render and Blitter engines reside in different power wells. The decision to use MMIO flips can be made based on workloads to give 100% residency for Media power well. v2: The MMIO flips now use the interrupt driven mechanism for issuing the flips when target seqno is reached. (Incorporating Ville's idea) v3: Rebasing on latest code. Code restructuring after incorporating Damien's comments v4: Addressing Ville's review comments -general cleanup -updating only base addr instead of calling update_primary_plane -extending patch for gen5+ platforms v5: Addressed Ville's review comments -Making mmio flip vs cs flip selection based on module parameter -Adding check for DRIVER_MODESET feature in notify_ring before calling notify mmio flip. -Other changes mostly in function arguments v6: -Having a seperate function to check condition for using mmio flips (Ville) -propogating error code from i915_gem_check_olr (Ville) v7: -Adding __must_check with i915_gem_check_olr (Chris) -Renaming mmio_flip_data to mmio_flip (Chris) -Rebasing on latest nightly v8: -Rebasing on latest code -squash 3rd patch in series(mmio setbase vs page flip race) with this patch -Added new tiling mode update in intel_do_mmio_flip (Chris) v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in intel_postpone_flip, as this is a more restrictive condition (Chris) v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch. These patches make the selection of CS vs MMIO flip at the page flip time, and make the module parameter for using mmio flips as tristate, the states being 'force CS flips', 'force mmio flips', 'driver discretion'. Changed the logic for driver discretion (Chris) v11: Minor code cleanup(better readability, fixing whitespace errors, using lockdep to check mutex locked status in postpone_flip, removal of __must_check in function definition) (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb [danvet: Fix up parameter alignement checkpatch spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02 19:17:17 +08:00
MODULE_PARM_DESC(use_mmio_flip,
"use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-17 04:49:29 +08:00
drm/i915: Disable the mmio.debug WARN after it fires If we have a single unclaimed register, we will have lots. A WARN for each one makes the machine unusable and does not aid debugging. Convert the i915.mmio_debug option to a counter for how many WARNs to fire before shutting up. Even when i915.mmio_debug was disabled it would continue to shout an *ERROR* for every interrupt, without any information at all for debugging. The massive verbiage was added in commit 5978118c39c2f72fd8b39ef9c086723542384809 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 16 17:49:29 2014 -0300 drm/i915: reorganize the unclaimed register detection code v2: Automatically enable invalid mmio reporting for the *next* invalid access if mmio_debug is disabled by default. This should give us clearer debug information without polluting the logs too much. v3: Compile fixes, rebase. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Update modparam text per the thread.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-18 18:55:50 +08:00
module_param_named(mmio_debug, i915.mmio_debug, int, 0600);
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-17 04:49:29 +08:00
MODULE_PARM_DESC(mmio_debug,
drm/i915: Disable the mmio.debug WARN after it fires If we have a single unclaimed register, we will have lots. A WARN for each one makes the machine unusable and does not aid debugging. Convert the i915.mmio_debug option to a counter for how many WARNs to fire before shutting up. Even when i915.mmio_debug was disabled it would continue to shout an *ERROR* for every interrupt, without any information at all for debugging. The massive verbiage was added in commit 5978118c39c2f72fd8b39ef9c086723542384809 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 16 17:49:29 2014 -0300 drm/i915: reorganize the unclaimed register detection code v2: Automatically enable invalid mmio reporting for the *next* invalid access if mmio_debug is disabled by default. This should give us clearer debug information without polluting the logs too much. v3: Compile fixes, rebase. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Update modparam text per the thread.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-18 18:55:50 +08:00
"Enable the MMIO debug code for the first N failures (default: off). "
"This may negatively affect performance.");
drm/i915: tame the chattermouth (v2) Many distro's have mechanism in place to collect and automatically file bugs for failed WARN()s. And since i915 has a lot of hw state sanity checks which result in WARN(), it generates quite a lot of noise which is somewhat disconcerting to the end user. Separate out the internal hw-is-in-the-state-I-expected checks into I915_STATE_WARN()s and allow configuration via i915.verbose_checks module param about whether this will generate a full blown stacktrace or just DRM_ERROR(). The new moduleparam defaults to true, so by default there is no change in behavior. And even when disabled, you will still get an error message logged. v2: paint the macro names blue, clarify that the default behavior remains the same as before Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-16 02:56:32 +08:00
module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
MODULE_PARM_DESC(verbose_state_checks,
"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
drm/i915: Add i915.nuclear_pageflip command line param to force atomic (v4) We don't have full atomic modeset support yet, but the "nuclear pageflip" subset of functionality (i.e., plane operations only) should be ready. Allow the user to force atomic on for debug purposes, or for fixed-purpose embedded devices that will only use atomic for plane updates. The term 'nuclear' is used here instead of 'atomic' to make it clear that this doesn't allow full atomic modeset support, just a (very useful) subset of the atomic functionality. We'll drop the kernel parameter and unconditionally enable atomic in a future patch once all of the necessary pieces are in. v2: - Use module_param_named_unsafe() (Daniel) - Simplify comment on DRIVER_ATOMIC guard (Daniel) v3: - Make the parameter "nuclear_pageflip" rather than just "nuclear" for clarity. (Ander) v4: - Make the internal variable "nuclear_pageflip" as well as the command-line option. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-23 08:53:12 +08:00
Partially revert "drm/i915: Use full atomic modeset." This partially reverts commit 74c090b1bdc57b1c9f1361908cca5a3d8a80fb08. The DRIVER_ATOMIC cap cannot yet be exported because i915 lacks async support. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26 15:29:56 +08:00
module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0600);
MODULE_PARM_DESC(nuclear_pageflip,
"Force atomic modeset functionality; asynchronous mode is not yet supported. (default: false).");
drm/i915/skl: Add module parameter to select edp vswing table This provides an option to override the value set by VBT for selecting edp Vswing Pre-emph setting table. v2: Adding comment about this being a temporary workaround and making the parameter read-only (Jani) v3: Changing mode to 0400 instead of 0 (Jani) https://bugs.freedesktop.org/show_bug.cgi?id=89554 Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-06 20:05:48 +08:00
/* WA to get away with the default setting in VBT for early platforms.Will be removed */
module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);
MODULE_PARM_DESC(edp_vswing,
"Ignore/Override vswing pre-emph table selection from VBT "
"(0=use value from vbt [default], 1=low power swing(200mV),"
"2=default swing(400mV))");
drm/i915: Add GuC-related module parameters Two new module parameters: "enable_guc_submission" which will turn on submission of batchbuffers via the GuC (when implemented), and "guc_log_level" which controls the level of debugging logged by the GuC and captured by the host. Signed-off-by: Alex Dai <yu.dai@intel.com> v4: Mark "enable_guc_submission" unsafe [Daniel Vetter] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-10 02:29:03 +08:00
module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, bool, 0400);
MODULE_PARM_DESC(enable_guc_submission, "Enable GuC submission (default:false)");
module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
MODULE_PARM_DESC(guc_log_level,
"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");