[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
/******************************************************************************
|
|
|
|
* x86_emulate.c
|
|
|
|
*
|
|
|
|
* Generic x86 (32-bit and 64-bit) instruction decoder and emulator.
|
|
|
|
*
|
|
|
|
* Copyright (c) 2005 Keir Fraser
|
|
|
|
*
|
|
|
|
* Linux coding style, mod r/m decoder, segment base fixes, real-mode
|
|
|
|
* privieged instructions:
|
|
|
|
*
|
|
|
|
* Copyright (C) 2006 Qumranet
|
|
|
|
*
|
|
|
|
* Avi Kivity <avi@qumranet.com>
|
|
|
|
* Yaniv Kamay <yaniv@qumranet.com>
|
|
|
|
*
|
|
|
|
* This work is licensed under the terms of the GNU GPL, version 2. See
|
|
|
|
* the COPYING file in the top-level directory.
|
|
|
|
*
|
|
|
|
* From: xen-unstable 10676:af9809f51f81a3c43f276f00c81a52ef558afda4
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef __KERNEL__
|
|
|
|
#include <stdio.h>
|
|
|
|
#include <stdint.h>
|
|
|
|
#include <public/xen.h>
|
|
|
|
#define DPRINTF(_f, _a ...) printf( _f , ## _a )
|
|
|
|
#else
|
|
|
|
#include "kvm.h"
|
|
|
|
#define DPRINTF(x...) do {} while (0)
|
|
|
|
#endif
|
|
|
|
#include "x86_emulate.h"
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Opcode effective-address decode tables.
|
|
|
|
* Note that we only emulate instructions that have at least one memory
|
|
|
|
* operand (excluding implicit stack references). We assume that stack
|
|
|
|
* references and instruction fetches will never occur in special memory
|
|
|
|
* areas that require emulation. So, for example, 'mov <imm>,<reg>' need
|
|
|
|
* not be handled.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Operand sizes: 8-bit operands or specified/overridden size. */
|
|
|
|
#define ByteOp (1<<0) /* 8-bit operands. */
|
|
|
|
/* Destination operand type. */
|
|
|
|
#define ImplicitOps (1<<1) /* Implicit in opcode. No generic decode. */
|
|
|
|
#define DstReg (2<<1) /* Register operand. */
|
|
|
|
#define DstMem (3<<1) /* Memory operand. */
|
|
|
|
#define DstMask (3<<1)
|
|
|
|
/* Source operand type. */
|
|
|
|
#define SrcNone (0<<3) /* No source operand. */
|
|
|
|
#define SrcImplicit (0<<3) /* Source operand is implicit in the opcode. */
|
|
|
|
#define SrcReg (1<<3) /* Register operand. */
|
|
|
|
#define SrcMem (2<<3) /* Memory operand. */
|
|
|
|
#define SrcMem16 (3<<3) /* Memory operand (16-bit). */
|
|
|
|
#define SrcMem32 (4<<3) /* Memory operand (32-bit). */
|
|
|
|
#define SrcImm (5<<3) /* Immediate operand. */
|
|
|
|
#define SrcImmByte (6<<3) /* 8-bit sign-extended immediate operand. */
|
|
|
|
#define SrcMask (7<<3)
|
|
|
|
/* Generic ModRM decode. */
|
|
|
|
#define ModRM (1<<6)
|
|
|
|
/* Destination is only written; never read. */
|
|
|
|
#define Mov (1<<7)
|
2007-01-23 12:40:40 +08:00
|
|
|
#define BitOp (1<<8)
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
|
|
|
|
static u8 opcode_table[256] = {
|
|
|
|
/* 0x00 - 0x07 */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x08 - 0x0F */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x10 - 0x17 */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x18 - 0x1F */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x20 - 0x27 */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x28 - 0x2F */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x30 - 0x37 */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x38 - 0x3F */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM, DstReg | SrcMem | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0x40 - 0x4F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x50 - 0x5F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x60 - 0x6F */
|
|
|
|
0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x70 - 0x7F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x80 - 0x87 */
|
|
|
|
ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImm | ModRM,
|
|
|
|
ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM,
|
|
|
|
/* 0x88 - 0x8F */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
|
|
|
|
ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
0, 0, 0, DstMem | SrcNone | ModRM | Mov,
|
|
|
|
/* 0x90 - 0x9F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xA0 - 0xA7 */
|
|
|
|
ByteOp | DstReg | SrcMem | Mov, DstReg | SrcMem | Mov,
|
|
|
|
ByteOp | DstMem | SrcReg | Mov, DstMem | SrcReg | Mov,
|
|
|
|
ByteOp | ImplicitOps | Mov, ImplicitOps | Mov,
|
|
|
|
ByteOp | ImplicitOps, ImplicitOps,
|
|
|
|
/* 0xA8 - 0xAF */
|
|
|
|
0, 0, ByteOp | ImplicitOps | Mov, ImplicitOps | Mov,
|
|
|
|
ByteOp | ImplicitOps | Mov, ImplicitOps | Mov,
|
|
|
|
ByteOp | ImplicitOps, ImplicitOps,
|
|
|
|
/* 0xB0 - 0xBF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xC0 - 0xC7 */
|
|
|
|
ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM, 0, 0,
|
|
|
|
0, 0, ByteOp | DstMem | SrcImm | ModRM | Mov,
|
|
|
|
DstMem | SrcImm | ModRM | Mov,
|
|
|
|
/* 0xC8 - 0xCF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xD0 - 0xD7 */
|
|
|
|
ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
|
|
|
|
ByteOp | DstMem | SrcImplicit | ModRM, DstMem | SrcImplicit | ModRM,
|
|
|
|
0, 0, 0, 0,
|
|
|
|
/* 0xD8 - 0xDF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xE0 - 0xEF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xF0 - 0xF7 */
|
|
|
|
0, 0, 0, 0,
|
|
|
|
0, 0, ByteOp | DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM,
|
|
|
|
/* 0xF8 - 0xFF */
|
|
|
|
0, 0, 0, 0,
|
|
|
|
0, 0, ByteOp | DstMem | SrcNone | ModRM, DstMem | SrcNone | ModRM
|
|
|
|
};
|
|
|
|
|
2007-01-23 12:40:40 +08:00
|
|
|
static u16 twobyte_table[256] = {
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
/* 0x00 - 0x0F */
|
|
|
|
0, SrcMem | ModRM | DstReg, 0, 0, 0, 0, ImplicitOps, 0,
|
|
|
|
0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0,
|
|
|
|
/* 0x10 - 0x1F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x20 - 0x2F */
|
|
|
|
ModRM | ImplicitOps, ModRM, ModRM | ImplicitOps, ModRM, 0, 0, 0, 0,
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x30 - 0x3F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x40 - 0x47 */
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
/* 0x48 - 0x4F */
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
|
|
|
|
/* 0x50 - 0x5F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x60 - 0x6F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x70 - 0x7F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x80 - 0x8F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0x90 - 0x9F */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xA0 - 0xA7 */
|
2007-01-23 12:40:40 +08:00
|
|
|
0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
/* 0xA8 - 0xAF */
|
2007-01-23 12:40:40 +08:00
|
|
|
0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
/* 0xB0 - 0xB7 */
|
|
|
|
ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
|
2007-01-23 12:40:40 +08:00
|
|
|
DstMem | SrcReg | ModRM | BitOp,
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem16 | ModRM | Mov,
|
|
|
|
/* 0xB8 - 0xBF */
|
2007-01-23 12:40:40 +08:00
|
|
|
0, 0, DstMem | SrcImmByte | ModRM, DstMem | SrcReg | ModRM | BitOp,
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
0, 0, ByteOp | DstReg | SrcMem | ModRM | Mov,
|
|
|
|
DstReg | SrcMem16 | ModRM | Mov,
|
|
|
|
/* 0xC0 - 0xCF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, ImplicitOps | ModRM, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xD0 - 0xDF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xE0 - 0xEF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
|
|
|
|
/* 0xF0 - 0xFF */
|
|
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Tell the emulator that of the Group 7 instructions (sgdt, lidt, etc.) we
|
|
|
|
* are interested only in invlpg and not in any of the rest.
|
|
|
|
*
|
|
|
|
* invlpg is a special instruction in that the data it references may not
|
|
|
|
* be mapped.
|
|
|
|
*/
|
|
|
|
void kvm_emulator_want_group7_invlpg(void)
|
|
|
|
{
|
|
|
|
twobyte_table[1] &= ~SrcMem;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(kvm_emulator_want_group7_invlpg);
|
|
|
|
|
|
|
|
/* Type, address-of, and value of an instruction's operand. */
|
|
|
|
struct operand {
|
|
|
|
enum { OP_REG, OP_MEM, OP_IMM } type;
|
|
|
|
unsigned int bytes;
|
|
|
|
unsigned long val, orig_val, *ptr;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* EFLAGS bit definitions. */
|
|
|
|
#define EFLG_OF (1<<11)
|
|
|
|
#define EFLG_DF (1<<10)
|
|
|
|
#define EFLG_SF (1<<7)
|
|
|
|
#define EFLG_ZF (1<<6)
|
|
|
|
#define EFLG_AF (1<<4)
|
|
|
|
#define EFLG_PF (1<<2)
|
|
|
|
#define EFLG_CF (1<<0)
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Instruction emulation:
|
|
|
|
* Most instructions are emulated directly via a fragment of inline assembly
|
|
|
|
* code. This allows us to save/restore EFLAGS and thus very easily pick up
|
|
|
|
* any modified flags.
|
|
|
|
*/
|
|
|
|
|
2006-12-13 16:33:45 +08:00
|
|
|
#if defined(CONFIG_X86_64)
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
#define _LO32 "k" /* force 32-bit operand */
|
|
|
|
#define _STK "%%rsp" /* stack pointer */
|
|
|
|
#elif defined(__i386__)
|
|
|
|
#define _LO32 "" /* force 32-bit operand */
|
|
|
|
#define _STK "%%esp" /* stack pointer */
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* These EFLAGS bits are restored from saved value during emulation, and
|
|
|
|
* any changes are written back to the saved value after emulation.
|
|
|
|
*/
|
|
|
|
#define EFLAGS_MASK (EFLG_OF|EFLG_SF|EFLG_ZF|EFLG_AF|EFLG_PF|EFLG_CF)
|
|
|
|
|
|
|
|
/* Before executing instruction: restore necessary bits in EFLAGS. */
|
|
|
|
#define _PRE_EFLAGS(_sav, _msk, _tmp) \
|
|
|
|
/* EFLAGS = (_sav & _msk) | (EFLAGS & ~_msk); */ \
|
|
|
|
"push %"_sav"; " \
|
|
|
|
"movl %"_msk",%"_LO32 _tmp"; " \
|
|
|
|
"andl %"_LO32 _tmp",("_STK"); " \
|
|
|
|
"pushf; " \
|
|
|
|
"notl %"_LO32 _tmp"; " \
|
|
|
|
"andl %"_LO32 _tmp",("_STK"); " \
|
|
|
|
"pop %"_tmp"; " \
|
|
|
|
"orl %"_LO32 _tmp",("_STK"); " \
|
|
|
|
"popf; " \
|
|
|
|
/* _sav &= ~msk; */ \
|
|
|
|
"movl %"_msk",%"_LO32 _tmp"; " \
|
|
|
|
"notl %"_LO32 _tmp"; " \
|
|
|
|
"andl %"_LO32 _tmp",%"_sav"; "
|
|
|
|
|
|
|
|
/* After executing instruction: write-back necessary bits in EFLAGS. */
|
|
|
|
#define _POST_EFLAGS(_sav, _msk, _tmp) \
|
|
|
|
/* _sav |= EFLAGS & _msk; */ \
|
|
|
|
"pushf; " \
|
|
|
|
"pop %"_tmp"; " \
|
|
|
|
"andl %"_msk",%"_LO32 _tmp"; " \
|
|
|
|
"orl %"_LO32 _tmp",%"_sav"; "
|
|
|
|
|
|
|
|
/* Raw emulation: instruction has two explicit operands. */
|
|
|
|
#define __emulate_2op_nobyte(_op,_src,_dst,_eflags,_wx,_wy,_lx,_ly,_qx,_qy) \
|
|
|
|
do { \
|
|
|
|
unsigned long _tmp; \
|
|
|
|
\
|
|
|
|
switch ((_dst).bytes) { \
|
|
|
|
case 2: \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","4","2") \
|
|
|
|
_op"w %"_wx"3,%1; " \
|
|
|
|
_POST_EFLAGS("0","4","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), \
|
|
|
|
"=&r" (_tmp) \
|
|
|
|
: _wy ((_src).val), "i" (EFLAGS_MASK) ); \
|
|
|
|
break; \
|
|
|
|
case 4: \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","4","2") \
|
|
|
|
_op"l %"_lx"3,%1; " \
|
|
|
|
_POST_EFLAGS("0","4","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), \
|
|
|
|
"=&r" (_tmp) \
|
|
|
|
: _ly ((_src).val), "i" (EFLAGS_MASK) ); \
|
|
|
|
break; \
|
|
|
|
case 8: \
|
|
|
|
__emulate_2op_8byte(_op, _src, _dst, \
|
|
|
|
_eflags, _qx, _qy); \
|
|
|
|
break; \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
#define __emulate_2op(_op,_src,_dst,_eflags,_bx,_by,_wx,_wy,_lx,_ly,_qx,_qy) \
|
|
|
|
do { \
|
|
|
|
unsigned long _tmp; \
|
|
|
|
switch ( (_dst).bytes ) \
|
|
|
|
{ \
|
|
|
|
case 1: \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","4","2") \
|
|
|
|
_op"b %"_bx"3,%1; " \
|
|
|
|
_POST_EFLAGS("0","4","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), \
|
|
|
|
"=&r" (_tmp) \
|
|
|
|
: _by ((_src).val), "i" (EFLAGS_MASK) ); \
|
|
|
|
break; \
|
|
|
|
default: \
|
|
|
|
__emulate_2op_nobyte(_op, _src, _dst, _eflags, \
|
|
|
|
_wx, _wy, _lx, _ly, _qx, _qy); \
|
|
|
|
break; \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
/* Source operand is byte-sized and may be restricted to just %cl. */
|
|
|
|
#define emulate_2op_SrcB(_op, _src, _dst, _eflags) \
|
|
|
|
__emulate_2op(_op, _src, _dst, _eflags, \
|
|
|
|
"b", "c", "b", "c", "b", "c", "b", "c")
|
|
|
|
|
|
|
|
/* Source operand is byte, word, long or quad sized. */
|
|
|
|
#define emulate_2op_SrcV(_op, _src, _dst, _eflags) \
|
|
|
|
__emulate_2op(_op, _src, _dst, _eflags, \
|
|
|
|
"b", "q", "w", "r", _LO32, "r", "", "r")
|
|
|
|
|
|
|
|
/* Source operand is word, long or quad sized. */
|
|
|
|
#define emulate_2op_SrcV_nobyte(_op, _src, _dst, _eflags) \
|
|
|
|
__emulate_2op_nobyte(_op, _src, _dst, _eflags, \
|
|
|
|
"w", "r", _LO32, "r", "", "r")
|
|
|
|
|
|
|
|
/* Instruction has only one explicit operand (no source operand). */
|
|
|
|
#define emulate_1op(_op, _dst, _eflags) \
|
|
|
|
do { \
|
|
|
|
unsigned long _tmp; \
|
|
|
|
\
|
|
|
|
switch ( (_dst).bytes ) \
|
|
|
|
{ \
|
|
|
|
case 1: \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","3","2") \
|
|
|
|
_op"b %1; " \
|
|
|
|
_POST_EFLAGS("0","3","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), \
|
|
|
|
"=&r" (_tmp) \
|
|
|
|
: "i" (EFLAGS_MASK) ); \
|
|
|
|
break; \
|
|
|
|
case 2: \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","3","2") \
|
|
|
|
_op"w %1; " \
|
|
|
|
_POST_EFLAGS("0","3","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), \
|
|
|
|
"=&r" (_tmp) \
|
|
|
|
: "i" (EFLAGS_MASK) ); \
|
|
|
|
break; \
|
|
|
|
case 4: \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","3","2") \
|
|
|
|
_op"l %1; " \
|
|
|
|
_POST_EFLAGS("0","3","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), \
|
|
|
|
"=&r" (_tmp) \
|
|
|
|
: "i" (EFLAGS_MASK) ); \
|
|
|
|
break; \
|
|
|
|
case 8: \
|
|
|
|
__emulate_1op_8byte(_op, _dst, _eflags); \
|
|
|
|
break; \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
/* Emulate an instruction with quadword operands (x86/64 only). */
|
2006-12-13 16:33:45 +08:00
|
|
|
#if defined(CONFIG_X86_64)
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
#define __emulate_2op_8byte(_op, _src, _dst, _eflags, _qx, _qy) \
|
|
|
|
do { \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","4","2") \
|
|
|
|
_op"q %"_qx"3,%1; " \
|
|
|
|
_POST_EFLAGS("0","4","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), "=&r" (_tmp) \
|
|
|
|
: _qy ((_src).val), "i" (EFLAGS_MASK) ); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
#define __emulate_1op_8byte(_op, _dst, _eflags) \
|
|
|
|
do { \
|
|
|
|
__asm__ __volatile__ ( \
|
|
|
|
_PRE_EFLAGS("0","3","2") \
|
|
|
|
_op"q %1; " \
|
|
|
|
_POST_EFLAGS("0","3","2") \
|
|
|
|
: "=m" (_eflags), "=m" ((_dst).val), "=&r" (_tmp) \
|
|
|
|
: "i" (EFLAGS_MASK) ); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
#elif defined(__i386__)
|
|
|
|
#define __emulate_2op_8byte(_op, _src, _dst, _eflags, _qx, _qy)
|
|
|
|
#define __emulate_1op_8byte(_op, _dst, _eflags)
|
|
|
|
#endif /* __i386__ */
|
|
|
|
|
|
|
|
/* Fetch next part of the instruction being emulated. */
|
|
|
|
#define insn_fetch(_type, _size, _eip) \
|
|
|
|
({ unsigned long _x; \
|
|
|
|
rc = ops->read_std((unsigned long)(_eip) + ctxt->cs_base, &_x, \
|
|
|
|
(_size), ctxt); \
|
|
|
|
if ( rc != 0 ) \
|
|
|
|
goto done; \
|
|
|
|
(_eip) += (_size); \
|
|
|
|
(_type)_x; \
|
|
|
|
})
|
|
|
|
|
|
|
|
/* Access/update address held in a register, based on addressing mode. */
|
|
|
|
#define register_address(base, reg) \
|
|
|
|
((base) + ((ad_bytes == sizeof(unsigned long)) ? (reg) : \
|
|
|
|
((reg) & ((1UL << (ad_bytes << 3)) - 1))))
|
|
|
|
|
|
|
|
#define register_address_increment(reg, inc) \
|
|
|
|
do { \
|
|
|
|
/* signed type ensures sign extension to long */ \
|
|
|
|
int _inc = (inc); \
|
|
|
|
if ( ad_bytes == sizeof(unsigned long) ) \
|
|
|
|
(reg) += _inc; \
|
|
|
|
else \
|
|
|
|
(reg) = ((reg) & ~((1UL << (ad_bytes << 3)) - 1)) | \
|
|
|
|
(((reg) + _inc) & ((1UL << (ad_bytes << 3)) - 1)); \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
void *decode_register(u8 modrm_reg, unsigned long *regs,
|
|
|
|
int highbyte_regs)
|
|
|
|
{
|
|
|
|
void *p;
|
|
|
|
|
|
|
|
p = ®s[modrm_reg];
|
|
|
|
if (highbyte_regs && modrm_reg >= 4 && modrm_reg < 8)
|
|
|
|
p = (unsigned char *)®s[modrm_reg & 3] + 1;
|
|
|
|
return p;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int read_descriptor(struct x86_emulate_ctxt *ctxt,
|
|
|
|
struct x86_emulate_ops *ops,
|
|
|
|
void *ptr,
|
|
|
|
u16 *size, unsigned long *address, int op_bytes)
|
|
|
|
{
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
if (op_bytes == 2)
|
|
|
|
op_bytes = 3;
|
|
|
|
*address = 0;
|
|
|
|
rc = ops->read_std((unsigned long)ptr, (unsigned long *)size, 2, ctxt);
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
rc = ops->read_std((unsigned long)ptr + 2, address, op_bytes, ctxt);
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
x86_emulate_memop(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
|
|
|
|
{
|
2007-01-23 12:40:40 +08:00
|
|
|
unsigned d;
|
|
|
|
u8 b, sib, twobyte = 0, rex_prefix = 0;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
u8 modrm, modrm_mod = 0, modrm_reg = 0, modrm_rm = 0;
|
|
|
|
unsigned long *override_base = NULL;
|
|
|
|
unsigned int op_bytes, ad_bytes, lock_prefix = 0, rep_prefix = 0, i;
|
|
|
|
int rc = 0;
|
|
|
|
struct operand src, dst;
|
|
|
|
unsigned long cr2 = ctxt->cr2;
|
|
|
|
int mode = ctxt->mode;
|
|
|
|
unsigned long modrm_ea;
|
|
|
|
int use_modrm_ea, index_reg = 0, base_reg = 0, scale, rip_relative = 0;
|
|
|
|
|
|
|
|
/* Shadow copy of register state. Committed on successful emulation. */
|
|
|
|
unsigned long _regs[NR_VCPU_REGS];
|
|
|
|
unsigned long _eip = ctxt->vcpu->rip, _eflags = ctxt->eflags;
|
|
|
|
unsigned long modrm_val = 0;
|
|
|
|
|
|
|
|
memcpy(_regs, ctxt->vcpu->regs, sizeof _regs);
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case X86EMUL_MODE_REAL:
|
|
|
|
case X86EMUL_MODE_PROT16:
|
|
|
|
op_bytes = ad_bytes = 2;
|
|
|
|
break;
|
|
|
|
case X86EMUL_MODE_PROT32:
|
|
|
|
op_bytes = ad_bytes = 4;
|
|
|
|
break;
|
2006-12-13 16:33:45 +08:00
|
|
|
#ifdef CONFIG_X86_64
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
case X86EMUL_MODE_PROT64:
|
|
|
|
op_bytes = 4;
|
|
|
|
ad_bytes = 8;
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
default:
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Legacy prefixes. */
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
|
|
switch (b = insn_fetch(u8, 1, _eip)) {
|
|
|
|
case 0x66: /* operand-size override */
|
|
|
|
op_bytes ^= 6; /* switch between 2/4 bytes */
|
|
|
|
break;
|
|
|
|
case 0x67: /* address-size override */
|
|
|
|
if (mode == X86EMUL_MODE_PROT64)
|
|
|
|
ad_bytes ^= 12; /* switch between 4/8 bytes */
|
|
|
|
else
|
|
|
|
ad_bytes ^= 6; /* switch between 2/4 bytes */
|
|
|
|
break;
|
|
|
|
case 0x2e: /* CS override */
|
|
|
|
override_base = &ctxt->cs_base;
|
|
|
|
break;
|
|
|
|
case 0x3e: /* DS override */
|
|
|
|
override_base = &ctxt->ds_base;
|
|
|
|
break;
|
|
|
|
case 0x26: /* ES override */
|
|
|
|
override_base = &ctxt->es_base;
|
|
|
|
break;
|
|
|
|
case 0x64: /* FS override */
|
|
|
|
override_base = &ctxt->fs_base;
|
|
|
|
break;
|
|
|
|
case 0x65: /* GS override */
|
|
|
|
override_base = &ctxt->gs_base;
|
|
|
|
break;
|
|
|
|
case 0x36: /* SS override */
|
|
|
|
override_base = &ctxt->ss_base;
|
|
|
|
break;
|
|
|
|
case 0xf0: /* LOCK */
|
|
|
|
lock_prefix = 1;
|
|
|
|
break;
|
|
|
|
case 0xf3: /* REP/REPE/REPZ */
|
|
|
|
rep_prefix = 1;
|
|
|
|
break;
|
|
|
|
case 0xf2: /* REPNE/REPNZ */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto done_prefixes;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
done_prefixes:
|
|
|
|
|
|
|
|
/* REX prefix. */
|
|
|
|
if ((mode == X86EMUL_MODE_PROT64) && ((b & 0xf0) == 0x40)) {
|
|
|
|
rex_prefix = b;
|
|
|
|
if (b & 8)
|
|
|
|
op_bytes = 8; /* REX.W */
|
|
|
|
modrm_reg = (b & 4) << 1; /* REX.R */
|
|
|
|
index_reg = (b & 2) << 2; /* REX.X */
|
|
|
|
modrm_rm = base_reg = (b & 1) << 3; /* REG.B */
|
|
|
|
b = insn_fetch(u8, 1, _eip);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Opcode byte(s). */
|
|
|
|
d = opcode_table[b];
|
|
|
|
if (d == 0) {
|
|
|
|
/* Two-byte opcode? */
|
|
|
|
if (b == 0x0f) {
|
|
|
|
twobyte = 1;
|
|
|
|
b = insn_fetch(u8, 1, _eip);
|
|
|
|
d = twobyte_table[b];
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Unrecognised? */
|
|
|
|
if (d == 0)
|
|
|
|
goto cannot_emulate;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ModRM and SIB bytes. */
|
|
|
|
if (d & ModRM) {
|
|
|
|
modrm = insn_fetch(u8, 1, _eip);
|
|
|
|
modrm_mod |= (modrm & 0xc0) >> 6;
|
|
|
|
modrm_reg |= (modrm & 0x38) >> 3;
|
|
|
|
modrm_rm |= (modrm & 0x07);
|
|
|
|
modrm_ea = 0;
|
|
|
|
use_modrm_ea = 1;
|
|
|
|
|
|
|
|
if (modrm_mod == 3) {
|
|
|
|
modrm_val = *(unsigned long *)
|
|
|
|
decode_register(modrm_rm, _regs, d & ByteOp);
|
|
|
|
goto modrm_done;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ad_bytes == 2) {
|
|
|
|
unsigned bx = _regs[VCPU_REGS_RBX];
|
|
|
|
unsigned bp = _regs[VCPU_REGS_RBP];
|
|
|
|
unsigned si = _regs[VCPU_REGS_RSI];
|
|
|
|
unsigned di = _regs[VCPU_REGS_RDI];
|
|
|
|
|
|
|
|
/* 16-bit ModR/M decode. */
|
|
|
|
switch (modrm_mod) {
|
|
|
|
case 0:
|
|
|
|
if (modrm_rm == 6)
|
|
|
|
modrm_ea += insn_fetch(u16, 2, _eip);
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
modrm_ea += insn_fetch(s8, 1, _eip);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
modrm_ea += insn_fetch(u16, 2, _eip);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
switch (modrm_rm) {
|
|
|
|
case 0:
|
|
|
|
modrm_ea += bx + si;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
modrm_ea += bx + di;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
modrm_ea += bp + si;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
modrm_ea += bp + di;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
modrm_ea += si;
|
|
|
|
break;
|
|
|
|
case 5:
|
|
|
|
modrm_ea += di;
|
|
|
|
break;
|
|
|
|
case 6:
|
|
|
|
if (modrm_mod != 0)
|
|
|
|
modrm_ea += bp;
|
|
|
|
break;
|
|
|
|
case 7:
|
|
|
|
modrm_ea += bx;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (modrm_rm == 2 || modrm_rm == 3 ||
|
|
|
|
(modrm_rm == 6 && modrm_mod != 0))
|
|
|
|
if (!override_base)
|
|
|
|
override_base = &ctxt->ss_base;
|
|
|
|
modrm_ea = (u16)modrm_ea;
|
|
|
|
} else {
|
|
|
|
/* 32/64-bit ModR/M decode. */
|
|
|
|
switch (modrm_rm) {
|
|
|
|
case 4:
|
|
|
|
case 12:
|
|
|
|
sib = insn_fetch(u8, 1, _eip);
|
|
|
|
index_reg |= (sib >> 3) & 7;
|
|
|
|
base_reg |= sib & 7;
|
|
|
|
scale = sib >> 6;
|
|
|
|
|
|
|
|
switch (base_reg) {
|
|
|
|
case 5:
|
|
|
|
if (modrm_mod != 0)
|
|
|
|
modrm_ea += _regs[base_reg];
|
|
|
|
else
|
|
|
|
modrm_ea += insn_fetch(s32, 4, _eip);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
modrm_ea += _regs[base_reg];
|
|
|
|
}
|
|
|
|
switch (index_reg) {
|
|
|
|
case 4:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
modrm_ea += _regs[index_reg] << scale;
|
|
|
|
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 5:
|
|
|
|
if (modrm_mod != 0)
|
|
|
|
modrm_ea += _regs[modrm_rm];
|
|
|
|
else if (mode == X86EMUL_MODE_PROT64)
|
|
|
|
rip_relative = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
modrm_ea += _regs[modrm_rm];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
switch (modrm_mod) {
|
|
|
|
case 0:
|
|
|
|
if (modrm_rm == 5)
|
|
|
|
modrm_ea += insn_fetch(s32, 4, _eip);
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
modrm_ea += insn_fetch(s8, 1, _eip);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
modrm_ea += insn_fetch(s32, 4, _eip);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!override_base)
|
|
|
|
override_base = &ctxt->ds_base;
|
|
|
|
if (mode == X86EMUL_MODE_PROT64 &&
|
|
|
|
override_base != &ctxt->fs_base &&
|
|
|
|
override_base != &ctxt->gs_base)
|
|
|
|
override_base = NULL;
|
|
|
|
|
|
|
|
if (override_base)
|
|
|
|
modrm_ea += *override_base;
|
|
|
|
|
|
|
|
if (rip_relative) {
|
|
|
|
modrm_ea += _eip;
|
|
|
|
switch (d & SrcMask) {
|
|
|
|
case SrcImmByte:
|
|
|
|
modrm_ea += 1;
|
|
|
|
break;
|
|
|
|
case SrcImm:
|
|
|
|
if (d & ByteOp)
|
|
|
|
modrm_ea += 1;
|
|
|
|
else
|
|
|
|
if (op_bytes == 8)
|
|
|
|
modrm_ea += 4;
|
|
|
|
else
|
|
|
|
modrm_ea += op_bytes;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (ad_bytes != 8)
|
|
|
|
modrm_ea = (u32)modrm_ea;
|
|
|
|
cr2 = modrm_ea;
|
|
|
|
modrm_done:
|
|
|
|
;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Decode and fetch the source operand: register, memory
|
|
|
|
* or immediate.
|
|
|
|
*/
|
|
|
|
switch (d & SrcMask) {
|
|
|
|
case SrcNone:
|
|
|
|
break;
|
|
|
|
case SrcReg:
|
|
|
|
src.type = OP_REG;
|
|
|
|
if (d & ByteOp) {
|
|
|
|
src.ptr = decode_register(modrm_reg, _regs,
|
|
|
|
(rex_prefix == 0));
|
|
|
|
src.val = src.orig_val = *(u8 *) src.ptr;
|
|
|
|
src.bytes = 1;
|
|
|
|
} else {
|
|
|
|
src.ptr = decode_register(modrm_reg, _regs, 0);
|
|
|
|
switch ((src.bytes = op_bytes)) {
|
|
|
|
case 2:
|
|
|
|
src.val = src.orig_val = *(u16 *) src.ptr;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
src.val = src.orig_val = *(u32 *) src.ptr;
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
src.val = src.orig_val = *(u64 *) src.ptr;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case SrcMem16:
|
|
|
|
src.bytes = 2;
|
|
|
|
goto srcmem_common;
|
|
|
|
case SrcMem32:
|
|
|
|
src.bytes = 4;
|
|
|
|
goto srcmem_common;
|
|
|
|
case SrcMem:
|
|
|
|
src.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
srcmem_common:
|
|
|
|
src.type = OP_MEM;
|
|
|
|
src.ptr = (unsigned long *)cr2;
|
|
|
|
if ((rc = ops->read_emulated((unsigned long)src.ptr,
|
|
|
|
&src.val, src.bytes, ctxt)) != 0)
|
|
|
|
goto done;
|
|
|
|
src.orig_val = src.val;
|
|
|
|
break;
|
|
|
|
case SrcImm:
|
|
|
|
src.type = OP_IMM;
|
|
|
|
src.ptr = (unsigned long *)_eip;
|
|
|
|
src.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
if (src.bytes == 8)
|
|
|
|
src.bytes = 4;
|
|
|
|
/* NB. Immediates are sign-extended as necessary. */
|
|
|
|
switch (src.bytes) {
|
|
|
|
case 1:
|
|
|
|
src.val = insn_fetch(s8, 1, _eip);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
src.val = insn_fetch(s16, 2, _eip);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
src.val = insn_fetch(s32, 4, _eip);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case SrcImmByte:
|
|
|
|
src.type = OP_IMM;
|
|
|
|
src.ptr = (unsigned long *)_eip;
|
|
|
|
src.bytes = 1;
|
|
|
|
src.val = insn_fetch(s8, 1, _eip);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2007-01-23 12:40:40 +08:00
|
|
|
/* Decode and fetch the destination operand: register or memory. */
|
|
|
|
switch (d & DstMask) {
|
|
|
|
case ImplicitOps:
|
|
|
|
/* Special instructions do their own operand decoding. */
|
|
|
|
goto special_insn;
|
|
|
|
case DstReg:
|
|
|
|
dst.type = OP_REG;
|
|
|
|
if ((d & ByteOp)
|
|
|
|
&& !(twobyte_table && (b == 0xb6 || b == 0xb7))) {
|
|
|
|
dst.ptr = decode_register(modrm_reg, _regs,
|
|
|
|
(rex_prefix == 0));
|
|
|
|
dst.val = *(u8 *) dst.ptr;
|
|
|
|
dst.bytes = 1;
|
|
|
|
} else {
|
|
|
|
dst.ptr = decode_register(modrm_reg, _regs, 0);
|
|
|
|
switch ((dst.bytes = op_bytes)) {
|
|
|
|
case 2:
|
|
|
|
dst.val = *(u16 *)dst.ptr;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
dst.val = *(u32 *)dst.ptr;
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
dst.val = *(u64 *)dst.ptr;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case DstMem:
|
|
|
|
dst.type = OP_MEM;
|
|
|
|
dst.ptr = (unsigned long *)cr2;
|
|
|
|
dst.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
if (d & BitOp) {
|
KVM: x86 emulator: fix bit string operations operand size
On x86, bit operations operate on a string of bits that can reside in
multiple words. For example, 'btsl %eax, (blah)' will touch the word
at blah+4 if %eax is between 32 and 63.
The x86 emulator compensates for that by advancing the operand address
by (bit offset / BITS_PER_LONG) and truncating the bit offset to the
range (0..BITS_PER_LONG-1). This has a side effect of forcing the operand
size to 8 bytes on 64-bit hosts.
Now, a 32-bit guest goes and fork()s a process. It write protects a stack
page at 0xbffff000 using the 'btr' instruction, at offset 0xffc in the page
table, with bit offset 1 (for the write permission bit).
The emulator now forces the operand size to 8 bytes as previously described,
and an innocent page table update turns into a cross-page-boundary write,
which is assumed by the mmu code not to be a page table, so it doesn't
actually clear the corresponding shadow page table entry. The guest and
host permissions are out of sync and guest memory is corrupted soon
afterwards, leading to guest failure.
Fix by not using BITS_PER_LONG as the word size; instead use the actual
operand size, so we get a 32-bit write in that case.
Note we still have to teach the mmu to handle cross-page-boundary writes
to guest page table; but for now this allows Damn Small Linux 0.4 (2.4.20)
to boot.
Signed-off-by: Avi Kivity <avi@qumranet.com>
2007-03-29 02:04:16 +08:00
|
|
|
unsigned long mask = ~(dst.bytes * 8 - 1);
|
|
|
|
|
|
|
|
dst.ptr = (void *)dst.ptr + (src.val & mask) / 8;
|
2007-01-23 12:40:40 +08:00
|
|
|
}
|
|
|
|
if (!(d & Mov) && /* optimisation - avoid slow emulated read */
|
|
|
|
((rc = ops->read_emulated((unsigned long)dst.ptr,
|
|
|
|
&dst.val, dst.bytes, ctxt)) != 0))
|
|
|
|
goto done;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
dst.orig_val = dst.val;
|
|
|
|
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
if (twobyte)
|
|
|
|
goto twobyte_insn;
|
|
|
|
|
|
|
|
switch (b) {
|
|
|
|
case 0x00 ... 0x05:
|
|
|
|
add: /* add */
|
|
|
|
emulate_2op_SrcV("add", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x08 ... 0x0d:
|
|
|
|
or: /* or */
|
|
|
|
emulate_2op_SrcV("or", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x10 ... 0x15:
|
|
|
|
adc: /* adc */
|
|
|
|
emulate_2op_SrcV("adc", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x18 ... 0x1d:
|
|
|
|
sbb: /* sbb */
|
|
|
|
emulate_2op_SrcV("sbb", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x20 ... 0x25:
|
|
|
|
and: /* and */
|
|
|
|
emulate_2op_SrcV("and", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x28 ... 0x2d:
|
|
|
|
sub: /* sub */
|
|
|
|
emulate_2op_SrcV("sub", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x30 ... 0x35:
|
|
|
|
xor: /* xor */
|
|
|
|
emulate_2op_SrcV("xor", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x38 ... 0x3d:
|
|
|
|
cmp: /* cmp */
|
|
|
|
emulate_2op_SrcV("cmp", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x63: /* movsxd */
|
|
|
|
if (mode != X86EMUL_MODE_PROT64)
|
|
|
|
goto cannot_emulate;
|
|
|
|
dst.val = (s32) src.val;
|
|
|
|
break;
|
|
|
|
case 0x80 ... 0x83: /* Grp1 */
|
|
|
|
switch (modrm_reg) {
|
|
|
|
case 0:
|
|
|
|
goto add;
|
|
|
|
case 1:
|
|
|
|
goto or;
|
|
|
|
case 2:
|
|
|
|
goto adc;
|
|
|
|
case 3:
|
|
|
|
goto sbb;
|
|
|
|
case 4:
|
|
|
|
goto and;
|
|
|
|
case 5:
|
|
|
|
goto sub;
|
|
|
|
case 6:
|
|
|
|
goto xor;
|
|
|
|
case 7:
|
|
|
|
goto cmp;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0x84 ... 0x85:
|
|
|
|
test: /* test */
|
|
|
|
emulate_2op_SrcV("test", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0x86 ... 0x87: /* xchg */
|
|
|
|
/* Write back the register source. */
|
|
|
|
switch (dst.bytes) {
|
|
|
|
case 1:
|
|
|
|
*(u8 *) src.ptr = (u8) dst.val;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
*(u16 *) src.ptr = (u16) dst.val;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
*src.ptr = (u32) dst.val;
|
|
|
|
break; /* 64b reg: zero-extend */
|
|
|
|
case 8:
|
|
|
|
*src.ptr = dst.val;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* Write back the memory destination with implicit LOCK
|
|
|
|
* prefix.
|
|
|
|
*/
|
|
|
|
dst.val = src.val;
|
|
|
|
lock_prefix = 1;
|
|
|
|
break;
|
|
|
|
case 0xa0 ... 0xa1: /* mov */
|
|
|
|
dst.ptr = (unsigned long *)&_regs[VCPU_REGS_RAX];
|
|
|
|
dst.val = src.val;
|
|
|
|
_eip += ad_bytes; /* skip src displacement */
|
|
|
|
break;
|
|
|
|
case 0xa2 ... 0xa3: /* mov */
|
|
|
|
dst.val = (unsigned long)_regs[VCPU_REGS_RAX];
|
|
|
|
_eip += ad_bytes; /* skip dst displacement */
|
|
|
|
break;
|
|
|
|
case 0x88 ... 0x8b: /* mov */
|
|
|
|
case 0xc6 ... 0xc7: /* mov (sole member of Grp11) */
|
|
|
|
dst.val = src.val;
|
|
|
|
break;
|
|
|
|
case 0x8f: /* pop (sole member of Grp1a) */
|
|
|
|
/* 64-bit mode: POP always pops a 64-bit operand. */
|
|
|
|
if (mode == X86EMUL_MODE_PROT64)
|
|
|
|
dst.bytes = 8;
|
|
|
|
if ((rc = ops->read_std(register_address(ctxt->ss_base,
|
|
|
|
_regs[VCPU_REGS_RSP]),
|
|
|
|
&dst.val, dst.bytes, ctxt)) != 0)
|
|
|
|
goto done;
|
|
|
|
register_address_increment(_regs[VCPU_REGS_RSP], dst.bytes);
|
|
|
|
break;
|
|
|
|
case 0xc0 ... 0xc1:
|
|
|
|
grp2: /* Grp2 */
|
|
|
|
switch (modrm_reg) {
|
|
|
|
case 0: /* rol */
|
|
|
|
emulate_2op_SrcB("rol", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 1: /* ror */
|
|
|
|
emulate_2op_SrcB("ror", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 2: /* rcl */
|
|
|
|
emulate_2op_SrcB("rcl", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 3: /* rcr */
|
|
|
|
emulate_2op_SrcB("rcr", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 4: /* sal/shl */
|
|
|
|
case 6: /* sal/shl */
|
|
|
|
emulate_2op_SrcB("sal", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 5: /* shr */
|
|
|
|
emulate_2op_SrcB("shr", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 7: /* sar */
|
|
|
|
emulate_2op_SrcB("sar", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0xd0 ... 0xd1: /* Grp2 */
|
|
|
|
src.val = 1;
|
|
|
|
goto grp2;
|
|
|
|
case 0xd2 ... 0xd3: /* Grp2 */
|
|
|
|
src.val = _regs[VCPU_REGS_RCX];
|
|
|
|
goto grp2;
|
|
|
|
case 0xf6 ... 0xf7: /* Grp3 */
|
|
|
|
switch (modrm_reg) {
|
|
|
|
case 0 ... 1: /* test */
|
|
|
|
/*
|
|
|
|
* Special case in Grp3: test has an immediate
|
|
|
|
* source operand.
|
|
|
|
*/
|
|
|
|
src.type = OP_IMM;
|
|
|
|
src.ptr = (unsigned long *)_eip;
|
|
|
|
src.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
if (src.bytes == 8)
|
|
|
|
src.bytes = 4;
|
|
|
|
switch (src.bytes) {
|
|
|
|
case 1:
|
|
|
|
src.val = insn_fetch(s8, 1, _eip);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
src.val = insn_fetch(s16, 2, _eip);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
src.val = insn_fetch(s32, 4, _eip);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
goto test;
|
|
|
|
case 2: /* not */
|
|
|
|
dst.val = ~dst.val;
|
|
|
|
break;
|
|
|
|
case 3: /* neg */
|
|
|
|
emulate_1op("neg", dst, _eflags);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto cannot_emulate;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0xfe ... 0xff: /* Grp4/Grp5 */
|
|
|
|
switch (modrm_reg) {
|
|
|
|
case 0: /* inc */
|
|
|
|
emulate_1op("inc", dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 1: /* dec */
|
|
|
|
emulate_1op("dec", dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 6: /* push */
|
|
|
|
/* 64-bit mode: PUSH always pushes a 64-bit operand. */
|
|
|
|
if (mode == X86EMUL_MODE_PROT64) {
|
|
|
|
dst.bytes = 8;
|
|
|
|
if ((rc = ops->read_std((unsigned long)dst.ptr,
|
|
|
|
&dst.val, 8,
|
|
|
|
ctxt)) != 0)
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
register_address_increment(_regs[VCPU_REGS_RSP],
|
|
|
|
-dst.bytes);
|
|
|
|
if ((rc = ops->write_std(
|
|
|
|
register_address(ctxt->ss_base,
|
|
|
|
_regs[VCPU_REGS_RSP]),
|
2007-04-22 20:28:19 +08:00
|
|
|
&dst.val, dst.bytes, ctxt)) != 0)
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
goto done;
|
|
|
|
dst.val = dst.orig_val; /* skanky: disable writeback */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto cannot_emulate;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
writeback:
|
|
|
|
if ((d & Mov) || (dst.orig_val != dst.val)) {
|
|
|
|
switch (dst.type) {
|
|
|
|
case OP_REG:
|
|
|
|
/* The 4-byte case *is* correct: in 64-bit mode we zero-extend. */
|
|
|
|
switch (dst.bytes) {
|
|
|
|
case 1:
|
|
|
|
*(u8 *)dst.ptr = (u8)dst.val;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
*(u16 *)dst.ptr = (u16)dst.val;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
*dst.ptr = (u32)dst.val;
|
|
|
|
break; /* 64b: zero-ext */
|
|
|
|
case 8:
|
|
|
|
*dst.ptr = dst.val;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case OP_MEM:
|
|
|
|
if (lock_prefix)
|
|
|
|
rc = ops->cmpxchg_emulated((unsigned long)dst.
|
2007-04-22 20:28:19 +08:00
|
|
|
ptr, &dst.orig_val,
|
|
|
|
&dst.val, dst.bytes,
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
ctxt);
|
|
|
|
else
|
|
|
|
rc = ops->write_emulated((unsigned long)dst.ptr,
|
2007-04-22 20:28:19 +08:00
|
|
|
&dst.val, dst.bytes,
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
ctxt);
|
|
|
|
if (rc != 0)
|
|
|
|
goto done;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Commit shadow register state. */
|
|
|
|
memcpy(ctxt->vcpu->regs, _regs, sizeof _regs);
|
|
|
|
ctxt->eflags = _eflags;
|
|
|
|
ctxt->vcpu->rip = _eip;
|
|
|
|
|
|
|
|
done:
|
|
|
|
return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
|
|
|
|
|
|
|
|
special_insn:
|
|
|
|
if (twobyte)
|
|
|
|
goto twobyte_special_insn;
|
|
|
|
if (rep_prefix) {
|
|
|
|
if (_regs[VCPU_REGS_RCX] == 0) {
|
|
|
|
ctxt->vcpu->rip = _eip;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
_regs[VCPU_REGS_RCX]--;
|
|
|
|
_eip = ctxt->vcpu->rip;
|
|
|
|
}
|
|
|
|
switch (b) {
|
|
|
|
case 0xa4 ... 0xa5: /* movs */
|
|
|
|
dst.type = OP_MEM;
|
|
|
|
dst.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
dst.ptr = (unsigned long *)register_address(ctxt->es_base,
|
|
|
|
_regs[VCPU_REGS_RDI]);
|
|
|
|
if ((rc = ops->read_emulated(register_address(
|
|
|
|
override_base ? *override_base : ctxt->ds_base,
|
|
|
|
_regs[VCPU_REGS_RSI]), &dst.val, dst.bytes, ctxt)) != 0)
|
|
|
|
goto done;
|
|
|
|
register_address_increment(_regs[VCPU_REGS_RSI],
|
|
|
|
(_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
|
|
|
|
register_address_increment(_regs[VCPU_REGS_RDI],
|
|
|
|
(_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
|
|
|
|
break;
|
|
|
|
case 0xa6 ... 0xa7: /* cmps */
|
|
|
|
DPRINTF("Urk! I don't handle CMPS.\n");
|
|
|
|
goto cannot_emulate;
|
|
|
|
case 0xaa ... 0xab: /* stos */
|
|
|
|
dst.type = OP_MEM;
|
|
|
|
dst.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
dst.ptr = (unsigned long *)cr2;
|
|
|
|
dst.val = _regs[VCPU_REGS_RAX];
|
|
|
|
register_address_increment(_regs[VCPU_REGS_RDI],
|
|
|
|
(_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
|
|
|
|
break;
|
|
|
|
case 0xac ... 0xad: /* lods */
|
|
|
|
dst.type = OP_REG;
|
|
|
|
dst.bytes = (d & ByteOp) ? 1 : op_bytes;
|
|
|
|
dst.ptr = (unsigned long *)&_regs[VCPU_REGS_RAX];
|
|
|
|
if ((rc = ops->read_emulated(cr2, &dst.val, dst.bytes, ctxt)) != 0)
|
|
|
|
goto done;
|
|
|
|
register_address_increment(_regs[VCPU_REGS_RSI],
|
|
|
|
(_eflags & EFLG_DF) ? -dst.bytes : dst.bytes);
|
|
|
|
break;
|
|
|
|
case 0xae ... 0xaf: /* scas */
|
|
|
|
DPRINTF("Urk! I don't handle SCAS.\n");
|
|
|
|
goto cannot_emulate;
|
|
|
|
}
|
|
|
|
goto writeback;
|
|
|
|
|
|
|
|
twobyte_insn:
|
|
|
|
switch (b) {
|
|
|
|
case 0x01: /* lgdt, lidt, lmsw */
|
|
|
|
switch (modrm_reg) {
|
|
|
|
u16 size;
|
|
|
|
unsigned long address;
|
|
|
|
|
|
|
|
case 2: /* lgdt */
|
|
|
|
rc = read_descriptor(ctxt, ops, src.ptr,
|
|
|
|
&size, &address, op_bytes);
|
|
|
|
if (rc)
|
|
|
|
goto done;
|
|
|
|
realmode_lgdt(ctxt->vcpu, size, address);
|
|
|
|
break;
|
|
|
|
case 3: /* lidt */
|
|
|
|
rc = read_descriptor(ctxt, ops, src.ptr,
|
|
|
|
&size, &address, op_bytes);
|
|
|
|
if (rc)
|
|
|
|
goto done;
|
|
|
|
realmode_lidt(ctxt->vcpu, size, address);
|
|
|
|
break;
|
|
|
|
case 4: /* smsw */
|
|
|
|
if (modrm_mod != 3)
|
|
|
|
goto cannot_emulate;
|
|
|
|
*(u16 *)&_regs[modrm_rm]
|
|
|
|
= realmode_get_cr(ctxt->vcpu, 0);
|
|
|
|
break;
|
|
|
|
case 6: /* lmsw */
|
|
|
|
if (modrm_mod != 3)
|
|
|
|
goto cannot_emulate;
|
|
|
|
realmode_lmsw(ctxt->vcpu, (u16)modrm_val, &_eflags);
|
|
|
|
break;
|
|
|
|
case 7: /* invlpg*/
|
|
|
|
emulate_invlpg(ctxt->vcpu, cr2);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto cannot_emulate;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0x21: /* mov from dr to reg */
|
|
|
|
if (modrm_mod != 3)
|
|
|
|
goto cannot_emulate;
|
|
|
|
rc = emulator_get_dr(ctxt, modrm_reg, &_regs[modrm_rm]);
|
|
|
|
break;
|
|
|
|
case 0x23: /* mov from reg to dr */
|
|
|
|
if (modrm_mod != 3)
|
|
|
|
goto cannot_emulate;
|
|
|
|
rc = emulator_set_dr(ctxt, modrm_reg, _regs[modrm_rm]);
|
|
|
|
break;
|
|
|
|
case 0x40 ... 0x4f: /* cmov */
|
|
|
|
dst.val = dst.orig_val = src.val;
|
|
|
|
d &= ~Mov; /* default to no move */
|
|
|
|
/*
|
|
|
|
* First, assume we're decoding an even cmov opcode
|
|
|
|
* (lsb == 0).
|
|
|
|
*/
|
|
|
|
switch ((b & 15) >> 1) {
|
|
|
|
case 0: /* cmovo */
|
|
|
|
d |= (_eflags & EFLG_OF) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 1: /* cmovb/cmovc/cmovnae */
|
|
|
|
d |= (_eflags & EFLG_CF) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 2: /* cmovz/cmove */
|
|
|
|
d |= (_eflags & EFLG_ZF) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 3: /* cmovbe/cmovna */
|
|
|
|
d |= (_eflags & (EFLG_CF | EFLG_ZF)) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 4: /* cmovs */
|
|
|
|
d |= (_eflags & EFLG_SF) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 5: /* cmovp/cmovpe */
|
|
|
|
d |= (_eflags & EFLG_PF) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 7: /* cmovle/cmovng */
|
|
|
|
d |= (_eflags & EFLG_ZF) ? Mov : 0;
|
|
|
|
/* fall through */
|
|
|
|
case 6: /* cmovl/cmovnge */
|
|
|
|
d |= (!(_eflags & EFLG_SF) !=
|
|
|
|
!(_eflags & EFLG_OF)) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
/* Odd cmov opcodes (lsb == 1) have inverted sense. */
|
|
|
|
d ^= (b & 1) ? Mov : 0;
|
|
|
|
break;
|
|
|
|
case 0xb0 ... 0xb1: /* cmpxchg */
|
|
|
|
/*
|
|
|
|
* Save real source value, then compare EAX against
|
|
|
|
* destination.
|
|
|
|
*/
|
|
|
|
src.orig_val = src.val;
|
|
|
|
src.val = _regs[VCPU_REGS_RAX];
|
|
|
|
emulate_2op_SrcV("cmp", src, dst, _eflags);
|
|
|
|
/* Always write back. The question is: where to? */
|
|
|
|
d |= Mov;
|
|
|
|
if (_eflags & EFLG_ZF) {
|
|
|
|
/* Success: write back to memory. */
|
|
|
|
dst.val = src.orig_val;
|
|
|
|
} else {
|
|
|
|
/* Failure: write the value we saw to EAX. */
|
|
|
|
dst.type = OP_REG;
|
|
|
|
dst.ptr = (unsigned long *)&_regs[VCPU_REGS_RAX];
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0xa3:
|
|
|
|
bt: /* bt */
|
|
|
|
src.val &= (dst.bytes << 3) - 1; /* only subword offset */
|
|
|
|
emulate_2op_SrcV_nobyte("bt", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0xb3:
|
|
|
|
btr: /* btr */
|
|
|
|
src.val &= (dst.bytes << 3) - 1; /* only subword offset */
|
|
|
|
emulate_2op_SrcV_nobyte("btr", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0xab:
|
|
|
|
bts: /* bts */
|
|
|
|
src.val &= (dst.bytes << 3) - 1; /* only subword offset */
|
|
|
|
emulate_2op_SrcV_nobyte("bts", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0xb6 ... 0xb7: /* movzx */
|
|
|
|
dst.bytes = op_bytes;
|
|
|
|
dst.val = (d & ByteOp) ? (u8) src.val : (u16) src.val;
|
|
|
|
break;
|
|
|
|
case 0xbb:
|
|
|
|
btc: /* btc */
|
|
|
|
src.val &= (dst.bytes << 3) - 1; /* only subword offset */
|
|
|
|
emulate_2op_SrcV_nobyte("btc", src, dst, _eflags);
|
|
|
|
break;
|
|
|
|
case 0xba: /* Grp8 */
|
|
|
|
switch (modrm_reg & 3) {
|
|
|
|
case 0:
|
|
|
|
goto bt;
|
|
|
|
case 1:
|
|
|
|
goto bts;
|
|
|
|
case 2:
|
|
|
|
goto btr;
|
|
|
|
case 3:
|
|
|
|
goto btc;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 0xbe ... 0xbf: /* movsx */
|
|
|
|
dst.bytes = op_bytes;
|
|
|
|
dst.val = (d & ByteOp) ? (s8) src.val : (s16) src.val;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
goto writeback;
|
|
|
|
|
|
|
|
twobyte_special_insn:
|
|
|
|
/* Disable writeback. */
|
|
|
|
dst.orig_val = dst.val;
|
|
|
|
switch (b) {
|
|
|
|
case 0x0d: /* GrpP (prefetch) */
|
|
|
|
case 0x18: /* Grp16 (prefetch/nop) */
|
|
|
|
break;
|
|
|
|
case 0x06:
|
|
|
|
emulate_clts(ctxt->vcpu);
|
|
|
|
break;
|
|
|
|
case 0x20: /* mov cr, reg */
|
|
|
|
if (modrm_mod != 3)
|
|
|
|
goto cannot_emulate;
|
|
|
|
_regs[modrm_rm] = realmode_get_cr(ctxt->vcpu, modrm_reg);
|
|
|
|
break;
|
|
|
|
case 0x22: /* mov reg, cr */
|
|
|
|
if (modrm_mod != 3)
|
|
|
|
goto cannot_emulate;
|
|
|
|
realmode_set_cr(ctxt->vcpu, modrm_reg, modrm_val, &_eflags);
|
|
|
|
break;
|
|
|
|
case 0xc7: /* Grp9 (cmpxchg8b) */
|
|
|
|
{
|
2007-04-22 20:28:19 +08:00
|
|
|
u64 old, new;
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
if ((rc = ops->read_emulated(cr2, &old, 8, ctxt)) != 0)
|
|
|
|
goto done;
|
|
|
|
if (((u32) (old >> 0) != (u32) _regs[VCPU_REGS_RAX]) ||
|
|
|
|
((u32) (old >> 32) != (u32) _regs[VCPU_REGS_RDX])) {
|
|
|
|
_regs[VCPU_REGS_RAX] = (u32) (old >> 0);
|
|
|
|
_regs[VCPU_REGS_RDX] = (u32) (old >> 32);
|
|
|
|
_eflags &= ~EFLG_ZF;
|
|
|
|
} else {
|
2007-04-22 20:28:19 +08:00
|
|
|
new = ((u64)_regs[VCPU_REGS_RCX] << 32)
|
|
|
|
| (u32) _regs[VCPU_REGS_RBX];
|
|
|
|
if ((rc = ops->cmpxchg_emulated(cr2, &old,
|
|
|
|
&new, 8, ctxt)) != 0)
|
[PATCH] kvm: userspace interface
web site: http://kvm.sourceforge.net
mailing list: kvm-devel@lists.sourceforge.net
(http://lists.sourceforge.net/lists/listinfo/kvm-devel)
The following patchset adds a driver for Intel's hardware virtualization
extensions to the x86 architecture. The driver adds a character device
(/dev/kvm) that exposes the virtualization capabilities to userspace. Using
this driver, a process can run a virtual machine (a "guest") in a fully
virtualized PC containing its own virtual hard disks, network adapters, and
display.
Using this driver, one can start multiple virtual machines on a host.
Each virtual machine is a process on the host; a virtual cpu is a thread in
that process. kill(1), nice(1), top(1) work as expected. In effect, the
driver adds a third execution mode to the existing two: we now have kernel
mode, user mode, and guest mode. Guest mode has its own address space mapping
guest physical memory (which is accessible to user mode by mmap()ing
/dev/kvm). Guest mode has no access to any I/O devices; any such access is
intercepted and directed to user mode for emulation.
The driver supports i386 and x86_64 hosts and guests. All combinations are
allowed except x86_64 guest on i386 host. For i386 guests and hosts, both pae
and non-pae paging modes are supported.
SMP hosts and UP guests are supported. At the moment only Intel
hardware is supported, but AMD virtualization support is being worked on.
Performance currently is non-stellar due to the naive implementation of the
mmu virtualization, which throws away most of the shadow page table entries
every context switch. We plan to address this in two ways:
- cache shadow page tables across tlb flushes
- wait until AMD and Intel release processors with nested page tables
Currently a virtual desktop is responsive but consumes a lot of CPU. Under
Windows I tried playing pinball and watching a few flash movies; with a recent
CPU one can hardly feel the virtualization. Linux/X is slower, probably due
to X being in a separate process.
In addition to the driver, you need a slightly modified qemu to provide I/O
device emulation and the BIOS.
Caveats (akpm: might no longer be true):
- The Windows install currently bluescreens due to a problem with the
virtual APIC. We are working on a fix. A temporary workaround is to
use an existing image or install through qemu
- Windows 64-bit does not work. That's also true for qemu, so it's
probably a problem with the device model.
[bero@arklinux.org: build fix]
[simon.kagstrom@bth.se: build fix, other fixes]
[uril@qumranet.com: KVM: Expose interrupt bitmap]
[akpm@osdl.org: i386 build fix]
[mingo@elte.hu: i386 fixes]
[rdreier@cisco.com: add log levels to all printks]
[randy.dunlap@oracle.com: Fix sparse NULL and C99 struct init warnings]
[anthony@codemonkey.ws: KVM: AMD SVM: 32-bit host support]
Signed-off-by: Yaniv Kamay <yaniv@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Cc: Simon Kagstrom <simon.kagstrom@bth.se>
Cc: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Uri Lublin <uril@qumranet.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 18:21:36 +08:00
|
|
|
goto done;
|
|
|
|
_eflags |= EFLG_ZF;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
goto writeback;
|
|
|
|
|
|
|
|
cannot_emulate:
|
|
|
|
DPRINTF("Cannot emulate %02x\n", b);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef __XEN__
|
|
|
|
|
|
|
|
#include <asm/mm.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
|
|
|
|
int
|
|
|
|
x86_emulate_read_std(unsigned long addr,
|
|
|
|
unsigned long *val,
|
|
|
|
unsigned int bytes, struct x86_emulate_ctxt *ctxt)
|
|
|
|
{
|
|
|
|
unsigned int rc;
|
|
|
|
|
|
|
|
*val = 0;
|
|
|
|
|
|
|
|
if ((rc = copy_from_user((void *)val, (void *)addr, bytes)) != 0) {
|
|
|
|
propagate_page_fault(addr + bytes - rc, 0); /* read fault */
|
|
|
|
return X86EMUL_PROPAGATE_FAULT;
|
|
|
|
}
|
|
|
|
|
|
|
|
return X86EMUL_CONTINUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
x86_emulate_write_std(unsigned long addr,
|
|
|
|
unsigned long val,
|
|
|
|
unsigned int bytes, struct x86_emulate_ctxt *ctxt)
|
|
|
|
{
|
|
|
|
unsigned int rc;
|
|
|
|
|
|
|
|
if ((rc = copy_to_user((void *)addr, (void *)&val, bytes)) != 0) {
|
|
|
|
propagate_page_fault(addr + bytes - rc, PGERR_write_access);
|
|
|
|
return X86EMUL_PROPAGATE_FAULT;
|
|
|
|
}
|
|
|
|
|
|
|
|
return X86EMUL_CONTINUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif
|