openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/Documentation/devicetree/bindings/regulator/max77686.txt

72 lines
2.2 KiB
Plaintext
Raw Normal View History

mfd: max77686: Split out regulator part from the DT binding The Maxim MAX77686 PMIC is a multi-function device with regulators, clocks and a RTC. The DT bindings for the clocks are in a separate file but the bindings for the regulators are inside the mfd part. To make it consistent with the clocks portion of the binding and because is more natural to look for regulator bindings under the bindings/regulator sub-directory, split the regulator portion of the DT binding and add it as a separate file. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-24 16:47:21 +08:00
Binding for Maxim MAX77686 regulators
This is a part of the device tree bindings of MAX77686 multi-function device.
More information can be found in ../mfd/max77686.txt file.
The MAX77686 PMIC has 9 high-efficiency Buck and 26 Low-DropOut (LDO)
regulators that can be controlled over I2C.
Following properties should be present in main device node of the MFD chip.
Optional node:
- voltage-regulators : The regulators of max77686 have to be instantiated
under subnode named "voltage-regulators" using the following format.
regulator_name {
regulator-compatible = LDOn/BUCKn
standard regulator constraints....
};
refer Documentation/devicetree/bindings/regulator/regulator.txt
The regulator node's name should be initialized with a string
to get matched with their hardware counterparts as follow:
-LDOn : for LDOs, where n can lie in range 1 to 26.
example: LDO1, LDO2, LDO26.
-BUCKn : for BUCKs, where n can lie in range 1 to 9.
example: BUCK1, BUCK5, BUCK9.
Regulators which can be turned off during system suspend:
-LDOn : 2, 6-8, 10-12, 14-16,
-BUCKn : 1-4.
Use standard regulator bindings for it ('regulator-off-in-suspend').
LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable
control. To turn this feature on this property must be added to the regulator
sub-node:
- maxim,ena-gpios : one GPIO specifier enable control (the gpio
flags are actually ignored and always
ACTIVE_HIGH is used)
Example:
dt-bindings: Remove leading zeros from bindings notation Improve the binding example by removing all the leading zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find ./Documentation/devicetree/bindings "*.txt"` Some unnecessary changes were manually fixed. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Rob Herring <robh@kernel.org>
2017-11-09 00:27:48 +08:00
max77686: pmic@9 {
mfd: max77686: Split out regulator part from the DT binding The Maxim MAX77686 PMIC is a multi-function device with regulators, clocks and a RTC. The DT bindings for the clocks are in a separate file but the bindings for the regulators are inside the mfd part. To make it consistent with the clocks portion of the binding and because is more natural to look for regulator bindings under the bindings/regulator sub-directory, split the regulator portion of the DT binding and add it as a separate file. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2015-08-24 16:47:21 +08:00
compatible = "maxim,max77686";
interrupt-parent = <&wakeup_eint>;
interrupts = <26 IRQ_TYPE_NONE>;
reg = <0x09>;
voltage-regulators {
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
regulator-always-on;
};
buck1_reg: BUCK1 {
regulator-name = "vdd_mif";
regulator-min-microvolt = <950000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
regulator-boot-on;
};
buck9_reg: BUCK9 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
};
};