linux/drivers/usb/misc/usbled.c

252 lines
5.6 KiB
C
Raw Normal View History

/*
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
* USB LED driver
*
* Copyright (C) 2004 Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb.h>
#define DRIVER_AUTHOR "Greg Kroah-Hartman, greg@kroah.com"
#define DRIVER_DESC "USB LED Driver"
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
enum led_type {
DELCOM_VISUAL_SIGNAL_INDICATOR,
DREAM_CHEEKY_WEBMAIL_NOTIFIER,
};
/* table of devices that work with this driver */
static const struct usb_device_id id_table[] = {
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
{ USB_DEVICE(0x0fc5, 0x1223),
.driver_info = DELCOM_VISUAL_SIGNAL_INDICATOR },
{ USB_DEVICE(0x1d34, 0x0004),
.driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER },
{ },
};
MODULE_DEVICE_TABLE (usb, id_table);
struct usb_led {
struct usb_device * udev;
unsigned char blue;
unsigned char red;
unsigned char green;
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
enum led_type type;
};
static void change_color(struct usb_led *led)
{
int retval = 0;
unsigned char *buffer;
buffer = kmalloc(8, GFP_KERNEL);
if (!buffer) {
dev_err(&led->udev->dev, "out of memory\n");
return;
}
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
switch (led->type) {
case DELCOM_VISUAL_SIGNAL_INDICATOR: {
unsigned char color = 0x07;
if (led->blue)
color &= ~0x04;
if (led->red)
color &= ~0x02;
if (led->green)
color &= ~0x01;
dev_dbg(&led->udev->dev,
"blue = %d, red = %d, green = %d, color = %.2x\n",
led->blue, led->red, led->green, color);
retval = usb_control_msg(led->udev,
usb_sndctrlpipe(led->udev, 0),
0x12,
0xc8,
(0x02 * 0x100) + 0x0a,
(0x00 * 0x100) + color,
buffer,
8,
2000);
break;
}
case DREAM_CHEEKY_WEBMAIL_NOTIFIER:
dev_dbg(&led->udev->dev,
"red = %d, green = %d, blue = %d\n",
led->red, led->green, led->blue);
buffer[0] = led->red;
buffer[1] = led->green;
buffer[2] = led->blue;
buffer[3] = buffer[4] = buffer[5] = 0;
buffer[6] = 0x1a;
buffer[7] = 0x05;
retval = usb_control_msg(led->udev,
usb_sndctrlpipe(led->udev, 0),
0x09,
0x21,
0x200,
0,
buffer,
8,
2000);
break;
default:
dev_err(&led->udev->dev, "unknown device type %d\n", led->type);
}
if (retval)
dev_dbg(&led->udev->dev, "retval = %d\n", retval);
kfree(buffer);
}
#define show_set(value) \
static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct usb_interface *intf = to_usb_interface(dev); \
struct usb_led *led = usb_get_intfdata(intf); \
\
return sprintf(buf, "%d\n", led->value); \
} \
static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
{ \
struct usb_interface *intf = to_usb_interface(dev); \
struct usb_led *led = usb_get_intfdata(intf); \
int temp = simple_strtoul(buf, NULL, 10); \
\
led->value = temp; \
change_color(led); \
return count; \
} \
static DEVICE_ATTR(value, S_IRUGO | S_IWUSR, show_##value, set_##value);
show_set(blue);
show_set(red);
show_set(green);
static int led_probe(struct usb_interface *interface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(interface);
struct usb_led *dev = NULL;
int retval = -ENOMEM;
dev = kzalloc(sizeof(struct usb_led), GFP_KERNEL);
if (dev == NULL) {
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
dev_err(&interface->dev, "out of memory\n");
goto error_mem;
}
dev->udev = usb_get_dev(udev);
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
dev->type = id->driver_info;
usb_set_intfdata (interface, dev);
retval = device_create_file(&interface->dev, &dev_attr_blue);
if (retval)
goto error;
retval = device_create_file(&interface->dev, &dev_attr_red);
if (retval)
goto error;
retval = device_create_file(&interface->dev, &dev_attr_green);
if (retval)
goto error;
USB: add support for Dream Cheeky DL100B Webmail Notifier (1d34:0004) So far the USBLED driver only supports Delcom's "USB Visual Signal Indicator" (http://www.delcomproducts.com/products_USBLMP.asp). The driver generates virtual files "red", "green", and "blue" under the device's /sys/ directory, where color values can be read from and written to. This patch adds support for Dream Cheeky's "DL100B Webmail Notifier" (http://www.dreamcheeky.com/webmail-notifier -- available from several shops, such as http://www.conrad.at/ce/de/product/777048/USB-WEBMAIL). This device isn't as pretty as Delcom's, but it's *far* cheaper, and its 3 LEDs can be set in 32 brightness steps each. The grey envelope contour can easily be removed, leaving a rather neutral white box (with a few small holes), which is useful for generic signalling purposes. Of course, the small circuit board can easily be put into a prettier case. The DL100B device pretends to be a HID, but the HID descriptor shows that it's not overly useful as such (see below). The patch therefore removes the "HID-ness" (hid-core.c, hid-ids.h), and adds the necessary commands to usbled.c. The protocol info comes from the developer's manual that Dream Cheeky kindly provided (815DeveloperManual.pdf). HID descriptor: 0: 05 01 Usage Page 'Generic Desktop Controls' 2: 09 10 Usage 'Reserved' 4: a1 01 Collection 'Application (mouse, keyboard)' 6: 05 00 Usage Page 'Undefined' 8: 19 10 Usage Minimum = 16 10: 29 11 Usage Maximum = 17 12: 15 00 Logical Minimum = 0 14: 25 0f Logical Maximum = 15 16: 75 08 Report Size = 8 18: 95 08 Report Count = 8 20: 91 02 Output data *var abs lin pref-state null-pos non-vol bit-field 22: 19 10 Usage Minimum = 16 24: 29 11 Usage Maximum = 17 26: 15 00 Logical Minimum = 0 28: 25 0f Logical Maximum = 15 30: 75 08 Report Size = 8 32: 95 08 Report Count = 8 34: 81 00 Input data array abs lin pref-state null-pos non-vol bit-field 36: c0 End Collection Signed-off-by: Melchior FRANZ <mfranz@aon.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-12-22 09:04:33 +08:00
if (dev->type == DREAM_CHEEKY_WEBMAIL_NOTIFIER) {
unsigned char *enable;
enable = kmemdup("\x1f\x02\0\x5f\0\0\x1a\x03", 8, GFP_KERNEL);
if (!enable) {
dev_err(&interface->dev, "out of memory\n");
retval = -ENOMEM;
goto error;
}
retval = usb_control_msg(udev,
usb_sndctrlpipe(udev, 0),
0x09,
0x21,
0x200,
0,
enable,
8,
2000);
kfree(enable);
if (retval != 8)
goto error;
}
dev_info(&interface->dev, "USB LED device now attached\n");
return 0;
error:
device_remove_file(&interface->dev, &dev_attr_blue);
device_remove_file(&interface->dev, &dev_attr_red);
device_remove_file(&interface->dev, &dev_attr_green);
usb_set_intfdata (interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
error_mem:
return retval;
}
static void led_disconnect(struct usb_interface *interface)
{
struct usb_led *dev;
dev = usb_get_intfdata (interface);
device_remove_file(&interface->dev, &dev_attr_blue);
device_remove_file(&interface->dev, &dev_attr_red);
device_remove_file(&interface->dev, &dev_attr_green);
/* first remove the files, then set the pointer to NULL */
usb_set_intfdata (interface, NULL);
usb_put_dev(dev->udev);
kfree(dev);
dev_info(&interface->dev, "USB LED now disconnected\n");
}
static struct usb_driver led_driver = {
.name = "usbled",
.probe = led_probe,
.disconnect = led_disconnect,
.id_table = id_table,
};
static int __init usb_led_init(void)
{
int retval = 0;
retval = usb_register(&led_driver);
if (retval)
err("usb_register failed. Error number %d", retval);
return retval;
}
static void __exit usb_led_exit(void)
{
usb_deregister(&led_driver);
}
module_init (usb_led_init);
module_exit (usb_led_exit);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");