2018-09-10 04:16:45 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Lantiq / Intel PMAC driver for XRX200 SoCs
|
|
|
|
*
|
|
|
|
* Copyright (C) 2010 Lantiq Deutschland
|
|
|
|
* Copyright (C) 2012 John Crispin <john@phrozen.org>
|
|
|
|
* Copyright (C) 2017 - 2018 Hauke Mehrtens <hauke@hauke-m.de>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
|
|
|
#include <linux/of_net.h>
|
|
|
|
#include <linux/of_platform.h>
|
|
|
|
|
|
|
|
#include <xway_dma.h>
|
|
|
|
|
|
|
|
/* DMA */
|
|
|
|
#define XRX200_DMA_DATA_LEN 0x600
|
|
|
|
#define XRX200_DMA_RX 0
|
|
|
|
#define XRX200_DMA_TX 1
|
|
|
|
|
|
|
|
/* cpu port mac */
|
|
|
|
#define PMAC_RX_IPG 0x0024
|
|
|
|
#define PMAC_RX_IPG_MASK 0xf
|
|
|
|
|
|
|
|
#define PMAC_HD_CTL 0x0000
|
|
|
|
/* Add Ethernet header to packets from DMA to PMAC */
|
|
|
|
#define PMAC_HD_CTL_ADD BIT(0)
|
|
|
|
/* Add VLAN tag to Packets from DMA to PMAC */
|
|
|
|
#define PMAC_HD_CTL_TAG BIT(1)
|
|
|
|
/* Add CRC to packets from DMA to PMAC */
|
|
|
|
#define PMAC_HD_CTL_AC BIT(2)
|
|
|
|
/* Add status header to packets from PMAC to DMA */
|
|
|
|
#define PMAC_HD_CTL_AS BIT(3)
|
|
|
|
/* Remove CRC from packets from PMAC to DMA */
|
|
|
|
#define PMAC_HD_CTL_RC BIT(4)
|
|
|
|
/* Remove Layer-2 header from packets from PMAC to DMA */
|
|
|
|
#define PMAC_HD_CTL_RL2 BIT(5)
|
|
|
|
/* Status header is present from DMA to PMAC */
|
|
|
|
#define PMAC_HD_CTL_RXSH BIT(6)
|
|
|
|
/* Add special tag from PMAC to switch */
|
|
|
|
#define PMAC_HD_CTL_AST BIT(7)
|
|
|
|
/* Remove specail Tag from PMAC to DMA */
|
|
|
|
#define PMAC_HD_CTL_RST BIT(8)
|
|
|
|
/* Check CRC from DMA to PMAC */
|
|
|
|
#define PMAC_HD_CTL_CCRC BIT(9)
|
|
|
|
/* Enable reaction to Pause frames in the PMAC */
|
|
|
|
#define PMAC_HD_CTL_FC BIT(10)
|
|
|
|
|
|
|
|
struct xrx200_chan {
|
|
|
|
int tx_free;
|
|
|
|
|
|
|
|
struct napi_struct napi;
|
|
|
|
struct ltq_dma_channel dma;
|
|
|
|
struct sk_buff *skb[LTQ_DESC_NUM];
|
|
|
|
|
|
|
|
struct xrx200_priv *priv;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct xrx200_priv {
|
|
|
|
struct clk *clk;
|
|
|
|
|
|
|
|
struct xrx200_chan chan_tx;
|
|
|
|
struct xrx200_chan chan_rx;
|
|
|
|
|
|
|
|
struct net_device *net_dev;
|
|
|
|
struct device *dev;
|
|
|
|
|
|
|
|
__iomem void *pmac_reg;
|
|
|
|
};
|
|
|
|
|
|
|
|
static u32 xrx200_pmac_r32(struct xrx200_priv *priv, u32 offset)
|
|
|
|
{
|
|
|
|
return __raw_readl(priv->pmac_reg + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void xrx200_pmac_w32(struct xrx200_priv *priv, u32 val, u32 offset)
|
|
|
|
{
|
|
|
|
__raw_writel(val, priv->pmac_reg + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void xrx200_pmac_mask(struct xrx200_priv *priv, u32 clear, u32 set,
|
|
|
|
u32 offset)
|
|
|
|
{
|
|
|
|
u32 val = xrx200_pmac_r32(priv, offset);
|
|
|
|
|
|
|
|
val &= ~(clear);
|
|
|
|
val |= set;
|
|
|
|
xrx200_pmac_w32(priv, val, offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* drop all the packets from the DMA ring */
|
|
|
|
static void xrx200_flush_dma(struct xrx200_chan *ch)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < LTQ_DESC_NUM; i++) {
|
|
|
|
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
|
|
|
|
|
|
|
|
if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) != LTQ_DMA_C)
|
|
|
|
break;
|
|
|
|
|
|
|
|
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
|
|
|
|
XRX200_DMA_DATA_LEN;
|
|
|
|
ch->dma.desc++;
|
|
|
|
ch->dma.desc %= LTQ_DESC_NUM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_open(struct net_device *net_dev)
|
|
|
|
{
|
|
|
|
struct xrx200_priv *priv = netdev_priv(net_dev);
|
|
|
|
|
|
|
|
napi_enable(&priv->chan_tx.napi);
|
|
|
|
ltq_dma_open(&priv->chan_tx.dma);
|
|
|
|
ltq_dma_enable_irq(&priv->chan_tx.dma);
|
|
|
|
|
|
|
|
napi_enable(&priv->chan_rx.napi);
|
|
|
|
ltq_dma_open(&priv->chan_rx.dma);
|
|
|
|
/* The boot loader does not always deactivate the receiving of frames
|
|
|
|
* on the ports and then some packets queue up in the PPE buffers.
|
|
|
|
* They already passed the PMAC so they do not have the tags
|
|
|
|
* configured here. Read the these packets here and drop them.
|
|
|
|
* The HW should have written them into memory after 10us
|
|
|
|
*/
|
|
|
|
usleep_range(20, 40);
|
|
|
|
xrx200_flush_dma(&priv->chan_rx);
|
|
|
|
ltq_dma_enable_irq(&priv->chan_rx.dma);
|
|
|
|
|
|
|
|
netif_wake_queue(net_dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_close(struct net_device *net_dev)
|
|
|
|
{
|
|
|
|
struct xrx200_priv *priv = netdev_priv(net_dev);
|
|
|
|
|
|
|
|
netif_stop_queue(net_dev);
|
|
|
|
|
|
|
|
napi_disable(&priv->chan_rx.napi);
|
|
|
|
ltq_dma_close(&priv->chan_rx.dma);
|
|
|
|
|
|
|
|
napi_disable(&priv->chan_tx.napi);
|
|
|
|
ltq_dma_close(&priv->chan_tx.dma);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_alloc_skb(struct xrx200_chan *ch)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
|
|
|
|
XRX200_DMA_DATA_LEN);
|
|
|
|
if (!ch->skb[ch->dma.desc]) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto skip;
|
|
|
|
}
|
|
|
|
|
|
|
|
ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->priv->dev,
|
|
|
|
ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
|
|
|
|
DMA_FROM_DEVICE);
|
|
|
|
if (unlikely(dma_mapping_error(ch->priv->dev,
|
|
|
|
ch->dma.desc_base[ch->dma.desc].addr))) {
|
|
|
|
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto skip;
|
|
|
|
}
|
|
|
|
|
|
|
|
skip:
|
|
|
|
ch->dma.desc_base[ch->dma.desc].ctl =
|
|
|
|
LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
|
|
|
|
XRX200_DMA_DATA_LEN;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_hw_receive(struct xrx200_chan *ch)
|
|
|
|
{
|
|
|
|
struct xrx200_priv *priv = ch->priv;
|
|
|
|
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
|
|
|
|
struct sk_buff *skb = ch->skb[ch->dma.desc];
|
|
|
|
int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
|
|
|
|
struct net_device *net_dev = priv->net_dev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = xrx200_alloc_skb(ch);
|
|
|
|
|
|
|
|
ch->dma.desc++;
|
|
|
|
ch->dma.desc %= LTQ_DESC_NUM;
|
|
|
|
|
|
|
|
if (ret) {
|
|
|
|
netdev_err(net_dev, "failed to allocate new rx buffer\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
skb_put(skb, len);
|
|
|
|
skb->protocol = eth_type_trans(skb, net_dev);
|
|
|
|
netif_receive_skb(skb);
|
|
|
|
net_dev->stats.rx_packets++;
|
|
|
|
net_dev->stats.rx_bytes += len - ETH_FCS_LEN;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_poll_rx(struct napi_struct *napi, int budget)
|
|
|
|
{
|
|
|
|
struct xrx200_chan *ch = container_of(napi,
|
|
|
|
struct xrx200_chan, napi);
|
|
|
|
int rx = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
while (rx < budget) {
|
|
|
|
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
|
|
|
|
|
|
|
|
if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
|
|
|
|
ret = xrx200_hw_receive(ch);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
rx++;
|
|
|
|
} else {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rx < budget) {
|
|
|
|
napi_complete(&ch->napi);
|
|
|
|
ltq_dma_enable_irq(&ch->dma);
|
|
|
|
}
|
|
|
|
|
|
|
|
return rx;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_tx_housekeeping(struct napi_struct *napi, int budget)
|
|
|
|
{
|
|
|
|
struct xrx200_chan *ch = container_of(napi,
|
|
|
|
struct xrx200_chan, napi);
|
|
|
|
struct net_device *net_dev = ch->priv->net_dev;
|
|
|
|
int pkts = 0;
|
|
|
|
int bytes = 0;
|
|
|
|
|
|
|
|
while (pkts < budget) {
|
|
|
|
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->tx_free];
|
|
|
|
|
|
|
|
if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
|
|
|
|
struct sk_buff *skb = ch->skb[ch->tx_free];
|
|
|
|
|
|
|
|
pkts++;
|
|
|
|
bytes += skb->len;
|
|
|
|
ch->skb[ch->tx_free] = NULL;
|
|
|
|
consume_skb(skb);
|
|
|
|
memset(&ch->dma.desc_base[ch->tx_free], 0,
|
|
|
|
sizeof(struct ltq_dma_desc));
|
|
|
|
ch->tx_free++;
|
|
|
|
ch->tx_free %= LTQ_DESC_NUM;
|
|
|
|
} else {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
net_dev->stats.tx_packets += pkts;
|
|
|
|
net_dev->stats.tx_bytes += bytes;
|
|
|
|
netdev_completed_queue(ch->priv->net_dev, pkts, bytes);
|
|
|
|
|
|
|
|
if (pkts < budget) {
|
|
|
|
napi_complete(&ch->napi);
|
|
|
|
ltq_dma_enable_irq(&ch->dma);
|
|
|
|
}
|
|
|
|
|
|
|
|
return pkts;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
|
|
|
|
{
|
|
|
|
struct xrx200_priv *priv = netdev_priv(net_dev);
|
|
|
|
struct xrx200_chan *ch = &priv->chan_tx;
|
|
|
|
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
|
|
|
|
u32 byte_offset;
|
|
|
|
dma_addr_t mapping;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
skb->dev = net_dev;
|
|
|
|
if (skb_put_padto(skb, ETH_ZLEN)) {
|
|
|
|
net_dev->stats.tx_dropped++;
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
len = skb->len;
|
|
|
|
|
|
|
|
if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
|
|
|
|
netdev_err(net_dev, "tx ring full\n");
|
|
|
|
netif_stop_queue(net_dev);
|
|
|
|
return NETDEV_TX_BUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
ch->skb[ch->dma.desc] = skb;
|
|
|
|
|
|
|
|
mapping = dma_map_single(priv->dev, skb->data, len, DMA_TO_DEVICE);
|
|
|
|
if (unlikely(dma_mapping_error(priv->dev, mapping)))
|
|
|
|
goto err_drop;
|
|
|
|
|
|
|
|
/* dma needs to start on a 16 byte aligned address */
|
|
|
|
byte_offset = mapping % 16;
|
|
|
|
|
|
|
|
desc->addr = mapping - byte_offset;
|
|
|
|
/* Make sure the address is written before we give it to HW */
|
|
|
|
wmb();
|
|
|
|
desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
|
|
|
|
LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
|
|
|
|
ch->dma.desc++;
|
|
|
|
ch->dma.desc %= LTQ_DESC_NUM;
|
|
|
|
if (ch->dma.desc == ch->tx_free)
|
|
|
|
netif_stop_queue(net_dev);
|
|
|
|
|
|
|
|
netdev_sent_queue(net_dev, len);
|
|
|
|
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
|
|
|
|
err_drop:
|
|
|
|
dev_kfree_skb(skb);
|
|
|
|
net_dev->stats.tx_dropped++;
|
|
|
|
net_dev->stats.tx_errors++;
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct net_device_ops xrx200_netdev_ops = {
|
|
|
|
.ndo_open = xrx200_open,
|
|
|
|
.ndo_stop = xrx200_close,
|
|
|
|
.ndo_start_xmit = xrx200_start_xmit,
|
|
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
|
|
};
|
|
|
|
|
|
|
|
static irqreturn_t xrx200_dma_irq(int irq, void *ptr)
|
|
|
|
{
|
|
|
|
struct xrx200_chan *ch = ptr;
|
|
|
|
|
|
|
|
ltq_dma_disable_irq(&ch->dma);
|
|
|
|
ltq_dma_ack_irq(&ch->dma);
|
|
|
|
|
|
|
|
napi_schedule(&ch->napi);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_dma_init(struct xrx200_priv *priv)
|
|
|
|
{
|
|
|
|
struct xrx200_chan *ch_rx = &priv->chan_rx;
|
|
|
|
struct xrx200_chan *ch_tx = &priv->chan_tx;
|
|
|
|
int ret = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ltq_dma_init_port(DMA_PORT_ETOP);
|
|
|
|
|
|
|
|
ch_rx->dma.nr = XRX200_DMA_RX;
|
|
|
|
ch_rx->dma.dev = priv->dev;
|
|
|
|
ch_rx->priv = priv;
|
|
|
|
|
|
|
|
ltq_dma_alloc_rx(&ch_rx->dma);
|
|
|
|
for (ch_rx->dma.desc = 0; ch_rx->dma.desc < LTQ_DESC_NUM;
|
|
|
|
ch_rx->dma.desc++) {
|
|
|
|
ret = xrx200_alloc_skb(ch_rx);
|
|
|
|
if (ret)
|
|
|
|
goto rx_free;
|
|
|
|
}
|
|
|
|
ch_rx->dma.desc = 0;
|
|
|
|
ret = devm_request_irq(priv->dev, ch_rx->dma.irq, xrx200_dma_irq, 0,
|
|
|
|
"xrx200_net_rx", &priv->chan_rx);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(priv->dev, "failed to request RX irq %d\n",
|
|
|
|
ch_rx->dma.irq);
|
|
|
|
goto rx_ring_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
ch_tx->dma.nr = XRX200_DMA_TX;
|
|
|
|
ch_tx->dma.dev = priv->dev;
|
|
|
|
ch_tx->priv = priv;
|
|
|
|
|
|
|
|
ltq_dma_alloc_tx(&ch_tx->dma);
|
|
|
|
ret = devm_request_irq(priv->dev, ch_tx->dma.irq, xrx200_dma_irq, 0,
|
|
|
|
"xrx200_net_tx", &priv->chan_tx);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(priv->dev, "failed to request TX irq %d\n",
|
|
|
|
ch_tx->dma.irq);
|
|
|
|
goto tx_free;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
tx_free:
|
|
|
|
ltq_dma_free(&ch_tx->dma);
|
|
|
|
|
|
|
|
rx_ring_free:
|
|
|
|
/* free the allocated RX ring */
|
|
|
|
for (i = 0; i < LTQ_DESC_NUM; i++) {
|
|
|
|
if (priv->chan_rx.skb[i])
|
|
|
|
dev_kfree_skb_any(priv->chan_rx.skb[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
rx_free:
|
|
|
|
ltq_dma_free(&ch_rx->dma);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void xrx200_hw_cleanup(struct xrx200_priv *priv)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ltq_dma_free(&priv->chan_tx.dma);
|
|
|
|
ltq_dma_free(&priv->chan_rx.dma);
|
|
|
|
|
|
|
|
/* free the allocated RX ring */
|
|
|
|
for (i = 0; i < LTQ_DESC_NUM; i++)
|
|
|
|
dev_kfree_skb_any(priv->chan_rx.skb[i]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct device_node *np = dev->of_node;
|
|
|
|
struct resource *res;
|
|
|
|
struct xrx200_priv *priv;
|
|
|
|
struct net_device *net_dev;
|
|
|
|
const u8 *mac;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* alloc the network device */
|
|
|
|
net_dev = devm_alloc_etherdev(dev, sizeof(struct xrx200_priv));
|
|
|
|
if (!net_dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
priv = netdev_priv(net_dev);
|
|
|
|
priv->net_dev = net_dev;
|
|
|
|
priv->dev = dev;
|
|
|
|
|
|
|
|
net_dev->netdev_ops = &xrx200_netdev_ops;
|
|
|
|
SET_NETDEV_DEV(net_dev, dev);
|
|
|
|
net_dev->min_mtu = ETH_ZLEN;
|
|
|
|
net_dev->max_mtu = XRX200_DMA_DATA_LEN;
|
|
|
|
|
|
|
|
/* load the memory ranges */
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res) {
|
|
|
|
dev_err(dev, "failed to get resources\n");
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
priv->pmac_reg = devm_ioremap_resource(dev, res);
|
2018-09-15 09:33:50 +08:00
|
|
|
if (IS_ERR(priv->pmac_reg)) {
|
2018-09-10 04:16:45 +08:00
|
|
|
dev_err(dev, "failed to request and remap io ranges\n");
|
2018-09-15 09:33:50 +08:00
|
|
|
return PTR_ERR(priv->pmac_reg);
|
2018-09-10 04:16:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
priv->chan_rx.dma.irq = platform_get_irq_byname(pdev, "rx");
|
|
|
|
if (priv->chan_rx.dma.irq < 0) {
|
|
|
|
dev_err(dev, "failed to get RX IRQ, %i\n",
|
|
|
|
priv->chan_rx.dma.irq);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
priv->chan_tx.dma.irq = platform_get_irq_byname(pdev, "tx");
|
|
|
|
if (priv->chan_tx.dma.irq < 0) {
|
|
|
|
dev_err(dev, "failed to get TX IRQ, %i\n",
|
|
|
|
priv->chan_tx.dma.irq);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* get the clock */
|
|
|
|
priv->clk = devm_clk_get(dev, NULL);
|
|
|
|
if (IS_ERR(priv->clk)) {
|
|
|
|
dev_err(dev, "failed to get clock\n");
|
|
|
|
return PTR_ERR(priv->clk);
|
|
|
|
}
|
|
|
|
|
|
|
|
mac = of_get_mac_address(np);
|
|
|
|
if (mac && is_valid_ether_addr(mac))
|
|
|
|
ether_addr_copy(net_dev->dev_addr, mac);
|
|
|
|
else
|
|
|
|
eth_hw_addr_random(net_dev);
|
|
|
|
|
|
|
|
/* bring up the dma engine and IP core */
|
|
|
|
err = xrx200_dma_init(priv);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2018-09-15 20:08:47 +08:00
|
|
|
/* enable clock gate */
|
|
|
|
err = clk_prepare_enable(priv->clk);
|
|
|
|
if (err)
|
|
|
|
goto err_uninit_dma;
|
|
|
|
|
2018-09-10 04:16:45 +08:00
|
|
|
/* set IPG to 12 */
|
|
|
|
xrx200_pmac_mask(priv, PMAC_RX_IPG_MASK, 0xb, PMAC_RX_IPG);
|
|
|
|
|
|
|
|
/* enable status header, enable CRC */
|
|
|
|
xrx200_pmac_mask(priv, 0,
|
|
|
|
PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH |
|
|
|
|
PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
|
|
|
|
PMAC_HD_CTL);
|
|
|
|
|
|
|
|
/* setup NAPI */
|
|
|
|
netif_napi_add(net_dev, &priv->chan_rx.napi, xrx200_poll_rx, 32);
|
|
|
|
netif_napi_add(net_dev, &priv->chan_tx.napi, xrx200_tx_housekeeping, 32);
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
|
|
|
|
err = register_netdev(net_dev);
|
|
|
|
if (err)
|
2018-09-15 20:08:47 +08:00
|
|
|
goto err_unprepare_clk;
|
2018-11-14 01:42:24 +08:00
|
|
|
|
|
|
|
return 0;
|
2018-09-10 04:16:45 +08:00
|
|
|
|
2018-09-15 20:08:47 +08:00
|
|
|
err_unprepare_clk:
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
|
2018-09-10 04:16:45 +08:00
|
|
|
err_uninit_dma:
|
|
|
|
xrx200_hw_cleanup(priv);
|
|
|
|
|
2018-11-14 01:42:24 +08:00
|
|
|
return err;
|
2018-09-10 04:16:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int xrx200_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct xrx200_priv *priv = platform_get_drvdata(pdev);
|
|
|
|
struct net_device *net_dev = priv->net_dev;
|
|
|
|
|
|
|
|
/* free stack related instances */
|
|
|
|
netif_stop_queue(net_dev);
|
|
|
|
netif_napi_del(&priv->chan_tx.napi);
|
|
|
|
netif_napi_del(&priv->chan_rx.napi);
|
|
|
|
|
|
|
|
/* remove the actual device */
|
|
|
|
unregister_netdev(net_dev);
|
|
|
|
|
2018-09-15 20:08:47 +08:00
|
|
|
/* release the clock */
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
|
2018-09-10 04:16:45 +08:00
|
|
|
/* shut down hardware */
|
|
|
|
xrx200_hw_cleanup(priv);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id xrx200_match[] = {
|
|
|
|
{ .compatible = "lantiq,xrx200-net" },
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, xrx200_match);
|
|
|
|
|
|
|
|
static struct platform_driver xrx200_driver = {
|
|
|
|
.probe = xrx200_probe,
|
|
|
|
.remove = xrx200_remove,
|
|
|
|
.driver = {
|
|
|
|
.name = "lantiq,xrx200-net",
|
|
|
|
.of_match_table = xrx200_match,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(xrx200_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("John Crispin <john@phrozen.org>");
|
|
|
|
MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
|
|
|
|
MODULE_LICENSE("GPL");
|