openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/infiniband/hw/cxgb4/provider.c

586 lines
17 KiB
C
Raw Normal View History

RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
/*
* Copyright (c) 2009-2010 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
#include <linux/inetdevice.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/byteorder.h>
#include <rdma/iw_cm.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_smi.h>
#include <rdma/ib_umem.h>
#include <rdma/ib_user_verbs.h>
#include "iw_cxgb4.h"
RDMA/cxgb4: Fastreg NSMR fixes - Remove dsgl support - doesn't work in T4. - Wrap the immediate PBL as needed when building it in the wr. - Adjust max pbl depth allowed based on ulptx alignment requirements. - Bump the slots per SQ to 5 to allow up to 128MB fast registers. - Advertise fastreg support by default. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-18 04:40:15 +08:00
static int fastreg_support = 1;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
module_param(fastreg_support, int, 0644);
RDMA/cxgb4: Fastreg NSMR fixes - Remove dsgl support - doesn't work in T4. - Wrap the immediate PBL as needed when building it in the wr. - Adjust max pbl depth allowed based on ulptx alignment requirements. - Bump the slots per SQ to 5 to allow up to 128MB fast registers. - Advertise fastreg support by default. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-18 04:40:15 +08:00
MODULE_PARM_DESC(fastreg_support, "Advertise fastreg support (default=1)");
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
static struct ib_ah *c4iw_ah_create(struct ib_pd *pd,
struct ib_ah_attr *ah_attr)
{
return ERR_PTR(-ENOSYS);
}
static int c4iw_ah_destroy(struct ib_ah *ah)
{
return -ENOSYS;
}
static int c4iw_multicast_attach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
return -ENOSYS;
}
static int c4iw_multicast_detach(struct ib_qp *ibqp, union ib_gid *gid, u16 lid)
{
return -ENOSYS;
}
static int c4iw_process_mad(struct ib_device *ibdev, int mad_flags,
u8 port_num, struct ib_wc *in_wc,
struct ib_grh *in_grh, struct ib_mad *in_mad,
struct ib_mad *out_mad)
{
return -ENOSYS;
}
static int c4iw_dealloc_ucontext(struct ib_ucontext *context)
{
struct c4iw_dev *rhp = to_c4iw_dev(context->device);
struct c4iw_ucontext *ucontext = to_c4iw_ucontext(context);
struct c4iw_mm_entry *mm, *tmp;
PDBG("%s context %p\n", __func__, context);
list_for_each_entry_safe(mm, tmp, &ucontext->mmaps, entry)
kfree(mm);
c4iw_release_dev_ucontext(&rhp->rdev, &ucontext->uctx);
kfree(ucontext);
return 0;
}
static struct ib_ucontext *c4iw_alloc_ucontext(struct ib_device *ibdev,
struct ib_udata *udata)
{
struct c4iw_ucontext *context;
struct c4iw_dev *rhp = to_c4iw_dev(ibdev);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
static int warned;
struct c4iw_alloc_ucontext_resp uresp;
int ret = 0;
struct c4iw_mm_entry *mm = NULL;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
PDBG("%s ibdev %p\n", __func__, ibdev);
context = kzalloc(sizeof(*context), GFP_KERNEL);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
if (!context) {
ret = -ENOMEM;
goto err;
}
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
c4iw_init_dev_ucontext(&rhp->rdev, &context->uctx);
INIT_LIST_HEAD(&context->mmaps);
spin_lock_init(&context->mmap_lock);
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
if (udata->outlen < sizeof(uresp)) {
if (!warned++)
pr_err(MOD "Warning - downlevel libcxgb4 (non-fatal), device status page disabled.");
rhp->rdev.flags |= T4_STATUS_PAGE_DISABLED;
} else {
mm = kmalloc(sizeof(*mm), GFP_KERNEL);
RDMA/cxgb4: set error code on kmalloc() failure If kmalloc() fails in c4iw_alloc_ucontext(), the function leaves but does not set an error code in ret variable: it will return 0 to the caller. This patch set ret to -ENOMEM in such case. Cc: Steve Wise <swise@opengridcomputing.com> Cc: Steve Wise <swise@chelsio.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29 02:55:21 +08:00
if (!mm) {
ret = -ENOMEM;
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
goto err_free;
RDMA/cxgb4: set error code on kmalloc() failure If kmalloc() fails in c4iw_alloc_ucontext(), the function leaves but does not set an error code in ret variable: it will return 0 to the caller. This patch set ret to -ENOMEM in such case. Cc: Steve Wise <swise@opengridcomputing.com> Cc: Steve Wise <swise@chelsio.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29 02:55:21 +08:00
}
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
uresp.status_page_size = PAGE_SIZE;
spin_lock(&context->mmap_lock);
uresp.status_page_key = context->key;
context->key += PAGE_SIZE;
spin_unlock(&context->mmap_lock);
ret = ib_copy_to_udata(udata, &uresp, sizeof(uresp));
if (ret)
goto err_mm;
mm->key = uresp.status_page_key;
mm->addr = virt_to_phys(rhp->rdev.status_page);
mm->len = PAGE_SIZE;
insert_mmap(context, mm);
}
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
return &context->ibucontext;
cxgb4/iw_cxgb4: Doorbell Drop Avoidance Bug Fixes The current logic suffers from a slow response time to disable user DB usage, and also fails to avoid DB FIFO drops under heavy load. This commit fixes these deficiencies and makes the avoidance logic more optimal. This is done by more efficiently notifying the ULDs of potential DB problems, and implements a smoother flow control algorithm in iw_cxgb4, which is the ULD that puts the most load on the DB fifo. Design: cxgb4: Direct ULD callback from the DB FULL/DROP interrupt handler. This allows the ULD to stop doing user DB writes as quickly as possible. While user DB usage is disabled, the LLD will accumulate DB write events for its queues. Then once DB usage is reenabled, a single DB write is done for each queue with its accumulated write count. This reduces the load put on the DB fifo when reenabling. iw_cxgb4: Instead of marking each qp to indicate DB writes are disabled, we create a device-global status page that each user process maps. This allows iw_cxgb4 to only set this single bit to disable all DB writes for all user QPs vs traversing the idr of all the active QPs. If the libcxgb4 doesn't support this, then we fall back to the old approach of marking each QP. Thus we allow the new driver to work with an older libcxgb4. When the LLD upcalls iw_cxgb4 indicating DB FULL, we disable all DB writes via the status page and transition the DB state to STOPPED. As user processes see that DB writes are disabled, they call into iw_cxgb4 to submit their DB write events. Since the DB state is in STOPPED, the QP trying to write gets enqueued on a new DB "flow control" list. As subsequent DB writes are submitted for this flow controlled QP, the amount of writes are accumulated for each QP on the flow control list. So all the user QPs that are actively ringing the DB get put on this list and the number of writes they request are accumulated. When the LLD upcalls iw_cxgb4 indicating DB EMPTY, which is in a workq context, we change the DB state to FLOW_CONTROL, and begin resuming all the QPs that are on the flow control list. This logic runs on until the flow control list is empty or we exit FLOW_CONTROL mode (due to a DB DROP upcall, for example). QPs are removed from this list, and their accumulated DB write counts written to the DB FIFO. Sets of QPs, called chunks in the code, are removed at one time. The chunk size is 64. So 64 QPs are resumed at a time, and before the next chunk is resumed, the logic waits (blocks) for the DB FIFO to drain. This prevents resuming to quickly and overflowing the FIFO. Once the flow control list is empty, the db state transitions back to NORMAL and user QPs are again allowed to write directly to the user DB register. The algorithm is designed such that if the DB write load is high enough, then all the DB writes get submitted by the kernel using this flow controlled approach to avoid DB drops. As the load lightens though, we resume to normal DB writes directly by user applications. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-15 00:22:08 +08:00
err_mm:
kfree(mm);
err_free:
kfree(context);
err:
return ERR_PTR(ret);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
}
static int c4iw_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
{
int len = vma->vm_end - vma->vm_start;
u32 key = vma->vm_pgoff << PAGE_SHIFT;
struct c4iw_rdev *rdev;
int ret = 0;
struct c4iw_mm_entry *mm;
struct c4iw_ucontext *ucontext;
u64 addr;
PDBG("%s pgoff 0x%lx key 0x%x len %d\n", __func__, vma->vm_pgoff,
key, len);
if (vma->vm_start & (PAGE_SIZE-1))
return -EINVAL;
rdev = &(to_c4iw_dev(context->device)->rdev);
ucontext = to_c4iw_ucontext(context);
mm = remove_mmap(ucontext, key, len);
if (!mm)
return -EINVAL;
addr = mm->addr;
kfree(mm);
RDMA/cxgb4: Support on-chip SQs T4 support on-chip SQs to reduce latency. This patch adds support for this in iw_cxgb4: - Manage ocqp memory like other adapter mem resources. - Allocate user mode SQs from ocqp mem if available. - Map ocqp mem to user process using write combining. - Map PCIE_MA_SYNC reg to user process. Bump uverbs ABI. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-14 00:23:57 +08:00
if ((addr >= pci_resource_start(rdev->lldi.pdev, 0)) &&
(addr < (pci_resource_start(rdev->lldi.pdev, 0) +
pci_resource_len(rdev->lldi.pdev, 0)))) {
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
/*
RDMA/cxgb4: Support on-chip SQs T4 support on-chip SQs to reduce latency. This patch adds support for this in iw_cxgb4: - Manage ocqp memory like other adapter mem resources. - Allocate user mode SQs from ocqp mem if available. - Map ocqp mem to user process using write combining. - Map PCIE_MA_SYNC reg to user process. Bump uverbs ABI. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-14 00:23:57 +08:00
* MA_SYNC register...
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
*/
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
RDMA/cxgb4: Support on-chip SQs T4 support on-chip SQs to reduce latency. This patch adds support for this in iw_cxgb4: - Manage ocqp memory like other adapter mem resources. - Allocate user mode SQs from ocqp mem if available. - Map ocqp mem to user process using write combining. - Map PCIE_MA_SYNC reg to user process. Bump uverbs ABI. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-14 00:23:57 +08:00
ret = io_remap_pfn_range(vma, vma->vm_start,
addr >> PAGE_SHIFT,
len, vma->vm_page_prot);
} else if ((addr >= pci_resource_start(rdev->lldi.pdev, 2)) &&
(addr < (pci_resource_start(rdev->lldi.pdev, 2) +
pci_resource_len(rdev->lldi.pdev, 2)))) {
/*
* Map user DB or OCQP memory...
*/
if (addr >= rdev->oc_mw_pa)
vma->vm_page_prot = t4_pgprot_wc(vma->vm_page_prot);
RDMA/cxgb4: Add Support for Chelsio T5 adapter Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14 13:08:58 +08:00
else {
if (is_t5(rdev->lldi.adapter_type))
vma->vm_page_prot =
t4_pgprot_wc(vma->vm_page_prot);
else
vma->vm_page_prot =
pgprot_noncached(vma->vm_page_prot);
}
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
ret = io_remap_pfn_range(vma, vma->vm_start,
addr >> PAGE_SHIFT,
len, vma->vm_page_prot);
} else {
/*
* Map WQ or CQ contig dma memory...
*/
ret = remap_pfn_range(vma, vma->vm_start,
addr >> PAGE_SHIFT,
len, vma->vm_page_prot);
}
return ret;
}
static int c4iw_deallocate_pd(struct ib_pd *pd)
{
struct c4iw_dev *rhp;
struct c4iw_pd *php;
php = to_c4iw_pd(pd);
rhp = php->rhp;
PDBG("%s ibpd %p pdid 0x%x\n", __func__, pd, php->pdid);
RDMA/cxgb4: Remove kfifo usage Using kfifos for ID management was limiting the number of QPs and preventing NP384 MPI jobs. So replace it with a simple bitmap allocator. Remove IDs from the IDR tables before deallocating them. This bug was causing the BUG_ON() in insert_handle() to fire because the ID was getting reused before being removed from the IDR table. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:32 +08:00
c4iw_put_resource(&rhp->rdev.resource.pdid_table, php->pdid);
RDMA/cxgb4: Add debugfs RDMA memory stats Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:27 +08:00
mutex_lock(&rhp->rdev.stats.lock);
rhp->rdev.stats.pd.cur--;
mutex_unlock(&rhp->rdev.stats.lock);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
kfree(php);
return 0;
}
static struct ib_pd *c4iw_allocate_pd(struct ib_device *ibdev,
struct ib_ucontext *context,
struct ib_udata *udata)
{
struct c4iw_pd *php;
u32 pdid;
struct c4iw_dev *rhp;
PDBG("%s ibdev %p\n", __func__, ibdev);
rhp = (struct c4iw_dev *) ibdev;
RDMA/cxgb4: Remove kfifo usage Using kfifos for ID management was limiting the number of QPs and preventing NP384 MPI jobs. So replace it with a simple bitmap allocator. Remove IDs from the IDR tables before deallocating them. This bug was causing the BUG_ON() in insert_handle() to fire because the ID was getting reused before being removed from the IDR table. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:32 +08:00
pdid = c4iw_get_resource(&rhp->rdev.resource.pdid_table);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
if (!pdid)
return ERR_PTR(-EINVAL);
php = kzalloc(sizeof(*php), GFP_KERNEL);
if (!php) {
RDMA/cxgb4: Remove kfifo usage Using kfifos for ID management was limiting the number of QPs and preventing NP384 MPI jobs. So replace it with a simple bitmap allocator. Remove IDs from the IDR tables before deallocating them. This bug was causing the BUG_ON() in insert_handle() to fire because the ID was getting reused before being removed from the IDR table. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:32 +08:00
c4iw_put_resource(&rhp->rdev.resource.pdid_table, pdid);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
return ERR_PTR(-ENOMEM);
}
php->pdid = pdid;
php->rhp = rhp;
if (context) {
if (ib_copy_to_udata(udata, &php->pdid, sizeof(u32))) {
c4iw_deallocate_pd(&php->ibpd);
return ERR_PTR(-EFAULT);
}
}
RDMA/cxgb4: Add debugfs RDMA memory stats Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:27 +08:00
mutex_lock(&rhp->rdev.stats.lock);
rhp->rdev.stats.pd.cur++;
if (rhp->rdev.stats.pd.cur > rhp->rdev.stats.pd.max)
rhp->rdev.stats.pd.max = rhp->rdev.stats.pd.cur;
mutex_unlock(&rhp->rdev.stats.lock);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
PDBG("%s pdid 0x%0x ptr 0x%p\n", __func__, pdid, php);
return &php->ibpd;
}
static int c4iw_query_pkey(struct ib_device *ibdev, u8 port, u16 index,
u16 *pkey)
{
PDBG("%s ibdev %p\n", __func__, ibdev);
*pkey = 0;
return 0;
}
static int c4iw_query_gid(struct ib_device *ibdev, u8 port, int index,
union ib_gid *gid)
{
struct c4iw_dev *dev;
PDBG("%s ibdev %p, port %d, index %d, gid %p\n",
__func__, ibdev, port, index, gid);
dev = to_c4iw_dev(ibdev);
BUG_ON(port == 0);
memset(&(gid->raw[0]), 0, sizeof(gid->raw));
memcpy(&(gid->raw[0]), dev->rdev.lldi.ports[port-1]->dev_addr, 6);
return 0;
}
static int c4iw_query_device(struct ib_device *ibdev,
struct ib_device_attr *props)
{
struct c4iw_dev *dev;
PDBG("%s ibdev %p\n", __func__, ibdev);
dev = to_c4iw_dev(ibdev);
memset(props, 0, sizeof *props);
memcpy(&props->sys_image_guid, dev->rdev.lldi.ports[0]->dev_addr, 6);
RDMA/cxgb4: Add Support for Chelsio T5 adapter Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14 13:08:58 +08:00
props->hw_ver = CHELSIO_CHIP_RELEASE(dev->rdev.lldi.adapter_type);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
props->fw_ver = dev->rdev.lldi.fw_vers;
props->device_cap_flags = dev->device_cap_flags;
props->page_size_cap = T4_PAGESIZE_MASK;
props->vendor_id = (u32)dev->rdev.lldi.pdev->vendor;
props->vendor_part_id = (u32)dev->rdev.lldi.pdev->device;
props->max_mr_size = T4_MAX_MR_SIZE;
props->max_qp = T4_MAX_NUM_QP;
props->max_qp_wr = T4_MAX_QP_DEPTH;
props->max_sge = T4_MAX_RECV_SGE;
props->max_sge_rd = 1;
MAINTAINERS: Add cxgb4 and iw_cxgb4 entries Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-06 05:45:40 +08:00
props->max_qp_rd_atom = c4iw_max_read_depth;
props->max_qp_init_rd_atom = c4iw_max_read_depth;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
props->max_cq = T4_MAX_NUM_CQ;
props->max_cqe = T4_MAX_CQ_DEPTH;
props->max_mr = c4iw_num_stags(&dev->rdev);
props->max_pd = T4_MAX_NUM_PD;
props->local_ca_ack_delay = 0;
props->max_fast_reg_page_list_len = T4_MAX_FR_DEPTH;
return 0;
}
static int c4iw_query_port(struct ib_device *ibdev, u8 port,
struct ib_port_attr *props)
{
struct c4iw_dev *dev;
struct net_device *netdev;
struct in_device *inetdev;
PDBG("%s ibdev %p\n", __func__, ibdev);
dev = to_c4iw_dev(ibdev);
netdev = dev->rdev.lldi.ports[port-1];
memset(props, 0, sizeof(struct ib_port_attr));
props->max_mtu = IB_MTU_4096;
if (netdev->mtu >= 4096)
props->active_mtu = IB_MTU_4096;
else if (netdev->mtu >= 2048)
props->active_mtu = IB_MTU_2048;
else if (netdev->mtu >= 1024)
props->active_mtu = IB_MTU_1024;
else if (netdev->mtu >= 512)
props->active_mtu = IB_MTU_512;
else
props->active_mtu = IB_MTU_256;
if (!netif_carrier_ok(netdev))
props->state = IB_PORT_DOWN;
else {
inetdev = in_dev_get(netdev);
if (inetdev) {
if (inetdev->ifa_list)
props->state = IB_PORT_ACTIVE;
else
props->state = IB_PORT_INIT;
in_dev_put(inetdev);
} else
props->state = IB_PORT_INIT;
}
props->port_cap_flags =
IB_PORT_CM_SUP |
IB_PORT_SNMP_TUNNEL_SUP |
IB_PORT_REINIT_SUP |
IB_PORT_DEVICE_MGMT_SUP |
IB_PORT_VENDOR_CLASS_SUP | IB_PORT_BOOT_MGMT_SUP;
props->gid_tbl_len = 1;
props->pkey_tbl_len = 1;
props->active_width = 2;
IB: Use central enum for speed instead of hard-coded values The kernel IB stack uses one enumeration for IB speed, which wasn't explicitly specified in the verbs header file. Add that enum, and use it all over the code. The IB speed/width notation is also used by iWARP and IBoE HW drivers, which use the convention of rate = speed * width to advertise their port link rate. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-02-29 00:49:50 +08:00
props->active_speed = IB_SPEED_DDR;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
props->max_msg_sz = -1;
return 0;
}
static ssize_t show_rev(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct c4iw_dev *c4iw_dev = container_of(dev, struct c4iw_dev,
ibdev.dev);
PDBG("%s dev 0x%p\n", __func__, dev);
RDMA/cxgb4: Add Support for Chelsio T5 adapter Adds support for Chelsio T5 adapter. Enables T5's Write Combining feature. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14 13:08:58 +08:00
return sprintf(buf, "%d\n",
CHELSIO_CHIP_RELEASE(c4iw_dev->rdev.lldi.adapter_type));
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
}
static ssize_t show_fw_ver(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct c4iw_dev *c4iw_dev = container_of(dev, struct c4iw_dev,
ibdev.dev);
PDBG("%s dev 0x%p\n", __func__, dev);
return sprintf(buf, "%u.%u.%u.%u\n",
FW_HDR_FW_VER_MAJOR_GET(c4iw_dev->rdev.lldi.fw_vers),
FW_HDR_FW_VER_MINOR_GET(c4iw_dev->rdev.lldi.fw_vers),
FW_HDR_FW_VER_MICRO_GET(c4iw_dev->rdev.lldi.fw_vers),
FW_HDR_FW_VER_BUILD_GET(c4iw_dev->rdev.lldi.fw_vers));
}
static ssize_t show_hca(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct c4iw_dev *c4iw_dev = container_of(dev, struct c4iw_dev,
ibdev.dev);
struct ethtool_drvinfo info;
struct net_device *lldev = c4iw_dev->rdev.lldi.ports[0];
PDBG("%s dev 0x%p\n", __func__, dev);
lldev->ethtool_ops->get_drvinfo(lldev, &info);
return sprintf(buf, "%s\n", info.driver);
}
static ssize_t show_board(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct c4iw_dev *c4iw_dev = container_of(dev, struct c4iw_dev,
ibdev.dev);
PDBG("%s dev 0x%p\n", __func__, dev);
return sprintf(buf, "%x.%x\n", c4iw_dev->rdev.lldi.pdev->vendor,
c4iw_dev->rdev.lldi.pdev->device);
}
static int c4iw_get_mib(struct ib_device *ibdev,
union rdma_protocol_stats *stats)
{
RDMA/cxgb4: Export T4 TCP MIB Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-18 23:16:40 +08:00
struct tp_tcp_stats v4, v6;
struct c4iw_dev *c4iw_dev = to_c4iw_dev(ibdev);
cxgb4_get_tcp_stats(c4iw_dev->rdev.lldi.pdev, &v4, &v6);
memset(stats, 0, sizeof *stats);
stats->iw.tcpInSegs = v4.tcpInSegs + v6.tcpInSegs;
stats->iw.tcpOutSegs = v4.tcpOutSegs + v6.tcpOutSegs;
stats->iw.tcpRetransSegs = v4.tcpRetransSegs + v6.tcpRetransSegs;
stats->iw.tcpOutRsts = v4.tcpOutRsts + v6.tcpOutSegs;
return 0;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
}
static DEVICE_ATTR(hw_rev, S_IRUGO, show_rev, NULL);
static DEVICE_ATTR(fw_ver, S_IRUGO, show_fw_ver, NULL);
static DEVICE_ATTR(hca_type, S_IRUGO, show_hca, NULL);
static DEVICE_ATTR(board_id, S_IRUGO, show_board, NULL);
static struct device_attribute *c4iw_class_attributes[] = {
&dev_attr_hw_rev,
&dev_attr_fw_ver,
&dev_attr_hca_type,
&dev_attr_board_id,
};
int c4iw_register_device(struct c4iw_dev *dev)
{
int ret;
int i;
PDBG("%s c4iw_dev %p\n", __func__, dev);
BUG_ON(!dev->rdev.lldi.ports[0]);
strlcpy(dev->ibdev.name, "cxgb4_%d", IB_DEVICE_NAME_MAX);
memset(&dev->ibdev.node_guid, 0, sizeof(dev->ibdev.node_guid));
memcpy(&dev->ibdev.node_guid, dev->rdev.lldi.ports[0]->dev_addr, 6);
dev->ibdev.owner = THIS_MODULE;
dev->device_cap_flags = IB_DEVICE_LOCAL_DMA_LKEY | IB_DEVICE_MEM_WINDOW;
if (fastreg_support)
dev->device_cap_flags |= IB_DEVICE_MEM_MGT_EXTENSIONS;
dev->ibdev.local_dma_lkey = 0;
dev->ibdev.uverbs_cmd_mask =
(1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
(1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
(1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
(1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_REG_MR) |
(1ull << IB_USER_VERBS_CMD_DEREG_MR) |
(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
(1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
(1ull << IB_USER_VERBS_CMD_REQ_NOTIFY_CQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_QP) |
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
RDMA/cxgb4: Add query_qp support This allows querying the QP state before flushing. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:33 +08:00
(1ull << IB_USER_VERBS_CMD_QUERY_QP) |
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
(1ull << IB_USER_VERBS_CMD_POLL_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
(1ull << IB_USER_VERBS_CMD_POST_SEND) |
(1ull << IB_USER_VERBS_CMD_POST_RECV);
dev->ibdev.node_type = RDMA_NODE_RNIC;
memcpy(dev->ibdev.node_desc, C4IW_NODE_DESC, sizeof(C4IW_NODE_DESC));
dev->ibdev.phys_port_cnt = dev->rdev.lldi.nports;
dev->ibdev.num_comp_vectors = 1;
dev->ibdev.dma_device = &(dev->rdev.lldi.pdev->dev);
dev->ibdev.query_device = c4iw_query_device;
dev->ibdev.query_port = c4iw_query_port;
dev->ibdev.query_pkey = c4iw_query_pkey;
dev->ibdev.query_gid = c4iw_query_gid;
dev->ibdev.alloc_ucontext = c4iw_alloc_ucontext;
dev->ibdev.dealloc_ucontext = c4iw_dealloc_ucontext;
dev->ibdev.mmap = c4iw_mmap;
dev->ibdev.alloc_pd = c4iw_allocate_pd;
dev->ibdev.dealloc_pd = c4iw_deallocate_pd;
dev->ibdev.create_ah = c4iw_ah_create;
dev->ibdev.destroy_ah = c4iw_ah_destroy;
dev->ibdev.create_qp = c4iw_create_qp;
dev->ibdev.modify_qp = c4iw_ib_modify_qp;
RDMA/cxgb4: Add query_qp support This allows querying the QP state before flushing. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18 17:59:33 +08:00
dev->ibdev.query_qp = c4iw_ib_query_qp;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
dev->ibdev.destroy_qp = c4iw_destroy_qp;
dev->ibdev.create_cq = c4iw_create_cq;
dev->ibdev.destroy_cq = c4iw_destroy_cq;
dev->ibdev.resize_cq = c4iw_resize_cq;
dev->ibdev.poll_cq = c4iw_poll_cq;
dev->ibdev.get_dma_mr = c4iw_get_dma_mr;
dev->ibdev.reg_phys_mr = c4iw_register_phys_mem;
dev->ibdev.rereg_phys_mr = c4iw_reregister_phys_mem;
dev->ibdev.reg_user_mr = c4iw_reg_user_mr;
dev->ibdev.dereg_mr = c4iw_dereg_mr;
dev->ibdev.alloc_mw = c4iw_alloc_mw;
dev->ibdev.bind_mw = c4iw_bind_mw;
dev->ibdev.dealloc_mw = c4iw_dealloc_mw;
dev->ibdev.alloc_fast_reg_mr = c4iw_alloc_fast_reg_mr;
dev->ibdev.alloc_fast_reg_page_list = c4iw_alloc_fastreg_pbl;
dev->ibdev.free_fast_reg_page_list = c4iw_free_fastreg_pbl;
dev->ibdev.attach_mcast = c4iw_multicast_attach;
dev->ibdev.detach_mcast = c4iw_multicast_detach;
dev->ibdev.process_mad = c4iw_process_mad;
dev->ibdev.req_notify_cq = c4iw_arm_cq;
dev->ibdev.post_send = c4iw_post_send;
dev->ibdev.post_recv = c4iw_post_receive;
dev->ibdev.get_protocol_stats = c4iw_get_mib;
RDMA/cxgb4: Support on-chip SQs T4 support on-chip SQs to reduce latency. This patch adds support for this in iw_cxgb4: - Manage ocqp memory like other adapter mem resources. - Allocate user mode SQs from ocqp mem if available. - Map ocqp mem to user process using write combining. - Map PCIE_MA_SYNC reg to user process. Bump uverbs ABI. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-14 00:23:57 +08:00
dev->ibdev.uverbs_abi_ver = C4IW_UVERBS_ABI_VERSION;
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
dev->ibdev.iwcm = kmalloc(sizeof(struct iw_cm_verbs), GFP_KERNEL);
if (!dev->ibdev.iwcm)
return -ENOMEM;
dev->ibdev.iwcm->connect = c4iw_connect;
dev->ibdev.iwcm->accept = c4iw_accept_cr;
dev->ibdev.iwcm->reject = c4iw_reject_cr;
dev->ibdev.iwcm->create_listen = c4iw_create_listen;
dev->ibdev.iwcm->destroy_listen = c4iw_destroy_listen;
dev->ibdev.iwcm->add_ref = c4iw_qp_add_ref;
dev->ibdev.iwcm->rem_ref = c4iw_qp_rem_ref;
dev->ibdev.iwcm->get_qp = c4iw_get_qp;
IB/core: Allow device-specific per-port sysfs files Add a new parameter to ib_register_device() so that low-level device drivers can pass in a pointer to a callback function that will be called for each port that is registered in sysfs. This allows low-level device drivers to create files in /sys/class/infiniband/<hca>/ports/<N>/ without having to poke through the internals of the RDMA sysfs handling. There is no need for an unregister function since the kobject reference will go to zero when ib_unregister_device() is called. Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-05-07 08:03:25 +08:00
ret = ib_register_device(&dev->ibdev, NULL);
RDMA/cxgb4: Add driver for Chelsio T4 RNIC Add an RDMA/iWARP driver for Chelsio T4 Ethernet adapters. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-04-22 06:30:06 +08:00
if (ret)
goto bail1;
for (i = 0; i < ARRAY_SIZE(c4iw_class_attributes); ++i) {
ret = device_create_file(&dev->ibdev.dev,
c4iw_class_attributes[i]);
if (ret)
goto bail2;
}
return 0;
bail2:
ib_unregister_device(&dev->ibdev);
bail1:
kfree(dev->ibdev.iwcm);
return ret;
}
void c4iw_unregister_device(struct c4iw_dev *dev)
{
int i;
PDBG("%s c4iw_dev %p\n", __func__, dev);
for (i = 0; i < ARRAY_SIZE(c4iw_class_attributes); ++i)
device_remove_file(&dev->ibdev.dev,
c4iw_class_attributes[i]);
ib_unregister_device(&dev->ibdev);
kfree(dev->ibdev.iwcm);
return;
}