linux/drivers/net/wireless/ti/wlcore/rx.c

340 lines
8.9 KiB
C
Raw Normal View History

/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/sched.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include "wlcore.h"
#include "debug.h"
#include "acx.h"
#include "rx.h"
#include "tx.h"
#include "io.h"
#include "hw_ops.h"
/*
* TODO: this is here just for now, it must be removed when the data
* operations are in place.
*/
#include "../wl12xx/reg.h"
static u32 wlcore_rx_get_buf_size(struct wl1271 *wl,
u32 rx_pkt_desc)
{
if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN)
return (rx_pkt_desc & ALIGNED_RX_BUF_SIZE_MASK) >>
ALIGNED_RX_BUF_SIZE_SHIFT;
return (rx_pkt_desc & RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
}
static u32 wlcore_rx_get_align_buf_size(struct wl1271 *wl, u32 pkt_len)
{
if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN)
return ALIGN(pkt_len, WL12XX_BUS_BLOCK_SIZE);
return pkt_len;
}
static void wl1271_rx_status(struct wl1271 *wl,
struct wl1271_rx_descriptor *desc,
struct ieee80211_rx_status *status,
u8 beacon)
{
memset(status, 0, sizeof(struct ieee80211_rx_status));
if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
status->band = IEEE80211_BAND_2GHZ;
else
status->band = IEEE80211_BAND_5GHZ;
status->rate_idx = wlcore_rate_to_idx(wl, desc->rate, status->band);
/* 11n support */
if (desc->rate <= wl->hw_min_ht_rate)
status->flag |= RX_FLAG_HT;
status->signal = desc->rssi;
/*
* FIXME: In wl1251, the SNR should be divided by two. In wl1271 we
* need to divide by two for now, but TI has been discussing about
* changing it. This needs to be rechecked.
*/
wl->noise = desc->rssi - (desc->snr >> 1);
status->freq = ieee80211_channel_to_frequency(desc->channel,
status->band);
if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
u8 desc_err_code = desc->status & WL1271_RX_DESC_STATUS_MASK;
status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED |
RX_FLAG_DECRYPTED;
if (unlikely(desc_err_code & WL1271_RX_DESC_MIC_FAIL)) {
status->flag |= RX_FLAG_MMIC_ERROR;
wl1271_warning("Michael MIC error. Desc: 0x%x",
desc_err_code);
}
}
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-26 00:26:59 +08:00
if (beacon)
wlcore_set_pending_regdomain_ch(wl, (u16)desc->channel,
status->band);
}
static int wl1271_rx_handle_data(struct wl1271 *wl, u8 *data, u32 length,
enum wl_rx_buf_align rx_align, u8 *hlid)
{
struct wl1271_rx_descriptor *desc;
struct sk_buff *skb;
struct ieee80211_hdr *hdr;
u8 *buf;
u8 beacon = 0;
u8 is_data = 0;
u8 reserved = 0, offset_to_data = 0;
u16 seq_num;
u32 pkt_data_len;
/*
* In PLT mode we seem to get frames and mac80211 warns about them,
* workaround this by not retrieving them at all.
*/
if (unlikely(wl->plt))
return -EINVAL;
pkt_data_len = wlcore_hw_get_rx_packet_len(wl, data, length);
if (!pkt_data_len) {
wl1271_error("Invalid packet arrived from HW. length %d",
length);
return -EINVAL;
}
if (rx_align == WLCORE_RX_BUF_UNALIGNED)
reserved = RX_BUF_ALIGN;
else if (rx_align == WLCORE_RX_BUF_PADDED)
offset_to_data = RX_BUF_ALIGN;
/* the data read starts with the descriptor */
desc = (struct wl1271_rx_descriptor *) data;
if (desc->packet_class == WL12XX_RX_CLASS_LOGGER) {
size_t len = length - sizeof(*desc);
wl12xx_copy_fwlog(wl, data + sizeof(*desc), len);
wake_up_interruptible(&wl->fwlog_waitq);
return 0;
}
/* discard corrupted packets */
if (desc->status & WL1271_RX_DESC_DECRYPT_FAIL) {
hdr = (void *)(data + sizeof(*desc) + offset_to_data);
wl1271_warning("corrupted packet in RX: status: 0x%x len: %d",
desc->status & WL1271_RX_DESC_STATUS_MASK,
pkt_data_len);
wl1271_dump((DEBUG_RX|DEBUG_CMD), "PKT: ", data + sizeof(*desc),
min(pkt_data_len,
ieee80211_hdrlen(hdr->frame_control)));
return -EINVAL;
}
/* skb length not including rx descriptor */
skb = __dev_alloc_skb(pkt_data_len + reserved, GFP_KERNEL);
if (!skb) {
wl1271_error("Couldn't allocate RX frame");
return -ENOMEM;
}
/* reserve the unaligned payload(if any) */
skb_reserve(skb, reserved);
buf = skb_put(skb, pkt_data_len);
/*
* Copy packets from aggregation buffer to the skbs without rx
* descriptor and with packet payload aligned care. In case of unaligned
* packets copy the packets in offset of 2 bytes guarantee IP header
* payload aligned to 4 bytes.
*/
memcpy(buf, data + sizeof(*desc), pkt_data_len);
if (rx_align == WLCORE_RX_BUF_PADDED)
skb_pull(skb, RX_BUF_ALIGN);
*hlid = desc->hlid;
hdr = (struct ieee80211_hdr *)skb->data;
if (ieee80211_is_beacon(hdr->frame_control))
beacon = 1;
if (ieee80211_is_data_present(hdr->frame_control))
is_data = 1;
wl1271_rx_status(wl, desc, IEEE80211_SKB_RXCB(skb), beacon);
wlcore_hw_set_rx_csum(wl, desc, skb);
seq_num = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s seq %d hlid %d", skb,
skb->len - desc->pad_len,
beacon ? "beacon" : "",
seq_num, *hlid);
skb_queue_tail(&wl->deferred_rx_queue, skb);
queue_work(wl->freezable_wq, &wl->netstack_work);
return is_data;
}
int wlcore_rx(struct wl1271 *wl, struct wl_fw_status_1 *status)
{
unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0};
u32 buf_size;
u32 fw_rx_counter = status->fw_rx_counter % wl->num_rx_desc;
u32 drv_rx_counter = wl->rx_counter % wl->num_rx_desc;
u32 rx_counter;
u32 pkt_len, align_pkt_len;
u32 pkt_offset, des;
u8 hlid;
enum wl_rx_buf_align rx_align;
int ret = 0;
while (drv_rx_counter != fw_rx_counter) {
buf_size = 0;
rx_counter = drv_rx_counter;
while (rx_counter != fw_rx_counter) {
des = le32_to_cpu(status->rx_pkt_descs[rx_counter]);
pkt_len = wlcore_rx_get_buf_size(wl, des);
align_pkt_len = wlcore_rx_get_align_buf_size(wl,
pkt_len);
if (buf_size + align_pkt_len > wl->aggr_buf_size)
break;
buf_size += align_pkt_len;
rx_counter++;
rx_counter %= wl->num_rx_desc;
}
if (buf_size == 0) {
wl1271_warning("received empty data");
break;
}
/* Read all available packets at once */
des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
ret = wlcore_hw_prepare_read(wl, des, buf_size);
if (ret < 0)
goto out;
ret = wlcore_read_data(wl, REG_SLV_MEM_DATA, wl->aggr_buf,
buf_size, true);
if (ret < 0)
goto out;
/* Split data into separate packets */
pkt_offset = 0;
while (pkt_offset < buf_size) {
des = le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]);
pkt_len = wlcore_rx_get_buf_size(wl, des);
rx_align = wlcore_hw_get_rx_buf_align(wl, des);
/*
* the handle data call can only fail in memory-outage
* conditions, in that case the received frame will just
* be dropped.
*/
if (wl1271_rx_handle_data(wl,
wl->aggr_buf + pkt_offset,
pkt_len, rx_align,
&hlid) == 1) {
if (hlid < WL12XX_MAX_LINKS)
__set_bit(hlid, active_hlids);
else
WARN(1,
"hlid exceeded WL12XX_MAX_LINKS "
"(%d)\n", hlid);
}
wl->rx_counter++;
drv_rx_counter++;
drv_rx_counter %= wl->num_rx_desc;
pkt_offset += wlcore_rx_get_align_buf_size(wl, pkt_len);
}
}
/*
* Write the driver's packet counter to the FW. This is only required
* for older hardware revisions
*/
if (wl->quirks & WLCORE_QUIRK_END_OF_TRANSACTION) {
ret = wlcore_write32(wl, WL12XX_REG_RX_DRIVER_COUNTER,
wl->rx_counter);
if (ret < 0)
goto out;
}
wl12xx_rearm_rx_streaming(wl, active_hlids);
out:
return ret;
}
#ifdef CONFIG_PM
int wl1271_rx_filter_enable(struct wl1271 *wl,
int index, bool enable,
struct wl12xx_rx_filter *filter)
{
int ret;
if (wl->rx_filter_enabled[index] == enable) {
wl1271_warning("Request to enable an already "
"enabled rx filter %d", index);
return 0;
}
ret = wl1271_acx_set_rx_filter(wl, index, enable, filter);
if (ret) {
wl1271_error("Failed to %s rx data filter %d (err=%d)",
enable ? "enable" : "disable", index, ret);
return ret;
}
wl->rx_filter_enabled[index] = enable;
return 0;
}
int wl1271_rx_filter_clear_all(struct wl1271 *wl)
{
int i, ret = 0;
for (i = 0; i < WL1271_MAX_RX_FILTERS; i++) {
if (!wl->rx_filter_enabled[i])
continue;
ret = wl1271_rx_filter_enable(wl, i, 0, NULL);
if (ret)
goto out;
}
out:
return ret;
}
#endif /* CONFIG_PM */