openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/powerpc/platforms/pseries/Makefile

29 lines
826 B
Makefile
Raw Normal View History

[POWERPC] Optimise some TOC usage Micro-optimisation - add no-minimal-toc to some more arch/powerpc Makefiles. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-10 18:23:54 +08:00
ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
endif
[POWERPC] Add CONFIG_PPC_PSERIES_DEBUG to enable debugging for platforms/pseries Add a DEBUG config setting which turns on all (most) of the debugging under platforms/pseries. To have this take effect we need to remove all the #undef DEBUG's, in various files. We leave the #undef DEBUG in platforms/pseries/lpar.c, as this enables debugging printks from the low-level hash table routines, and tends to make your system unusable. If you want those enabled you still have to turn them on by hand. Also some of the RAS code has a DEBUG block which causes a functional change, so I've keyed this off a different (non-existant) debug #define. This is only enabled if you have PPC_EARLY_DEBUG enabled also. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 13:13:21 +08:00
ifeq ($(CONFIG_PPC_PSERIES_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
endif
[POWERPC] Allow pSeries to build without CONFIG_PCI Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 14:04:44 +08:00
obj-y := lpar.o hvCall.o nvram.o reconfig.o \
powerpc/chrp: Use the same RTAS daemon as pSeries The CHRP code has some fishy timer based code to scan the RTAS event log, which uses a 1KB stack buffer and doesn't even use the results. The pSeries code as a nicer daemon that allows userspace to read the event log and basically uses the same RTAS interface This patch moves rtasd.c out of platform/pseries and makes it usable by CHRP, after removing the old crufty event log mechanism in there. The nvram logging part of the daemon is still only available on 64-bit since the underlying nvram management routines aren't currently shared. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-25 03:30:05 +08:00
setup.o iommu.o ras.o \
powerpc/pseries: Kernel DLPAR Infrastructure The Dynamic Logical Partitioning capabilities of the powerpc pseries platform allows for the addition and removal of resources (i.e. CPU's, memory, and PCI devices) from a partition. The removal of a resource involves removing the resource's node from the device tree and then returning the resource to firmware via the rtas set-indicator call. To add a resource, it is first obtained from firmware via the rtas set-indicator call and then a new device tree node is created using the ibm,configure-coinnector rtas call and added to the device tree. This patch provides the kernel DLPAR infrastructure in a new filed named dlpar.c. The functionality provided is for acquiring and releasing a resource from firmware and the parsing of information returned from the ibm,configure-connector rtas call. Additionally this exports the pSeries reconfiguration notifier chain so that it can be invoked when device tree updates are made. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-25 05:10:49 +08:00
firmware.o power.o dlpar.o
powerpc: move pSeries files to arch/powerpc/platforms/pseries Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:03:41 +08:00
obj-$(CONFIG_SMP) += smp.o
[PATCH] powerpc: Move xics.[ch] into platforms/pseries This patch moves the XICS interrupt controller code into the platforms/pseries directory, since it only appears on pSeries machines. If it ever appears on some other machine we can move it to sysdev, although xics.c itself will need a bunch of changes in that case to remove pSeries specific assumptions. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-28 13:35:50 +08:00
obj-$(CONFIG_XICS) += xics.o
[PATCH] powerpc: Move scanlog.c to platforms/pseries scanlog.c is only compiled on pSeries. Thus, this patch moves it to platforms/pseries. Built and booted on pSeries LPAR (ARCH=powerpc and ARCH=ppc64). Built for iSeries (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-10 09:42:17 +08:00
obj-$(CONFIG_SCANLOG) += scanlog.o
[POWERPC] Add EEH sysfs blinkenlights Add sysfs blinkenlights for EEH statistics. Shuffle the eeh_add_device_tree() call so that it appears in the correct sequence. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/Makefile | 2 arch/powerpc/platforms/pseries/eeh.c | 4 + arch/powerpc/platforms/pseries/eeh_cache.c | 2 arch/powerpc/platforms/pseries/eeh_sysfs.c | 84 +++++++++++++++++++++++++++++ arch/powerpc/platforms/pseries/pci_dlpar.c | 7 +- include/asm-powerpc/ppc-pci.h | 3 + 6 files changed, 98 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-24 01:16:46 +08:00
obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o
[POWERPC] Cleanup pseries kexec code Move all the pseries kexec code into one file, platforms/pseries/kexec.c Provide helpers for setting up ppc_md.kexec_cpu_down, so that we don't have to have #ifdef CONFIG_KEXEC in setup.c Move the initialisation of the ppc_md kexec callbacks into an init routine. This is well and truly early enough to cause no change in behaviour, we can't kexec until userspace has given us a kernel to kexec into. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-08 15:33:55 +08:00
obj-$(CONFIG_KEXEC) += kexec.o
[POWERPC] Allow pSeries to build without CONFIG_PCI Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-04 14:04:44 +08:00
obj-$(CONFIG_PCI) += pci.o pci_dlpar.o
powerpc/pseries: The pseries MSI code depends on EEH Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-06 01:36:39 +08:00
obj-$(CONFIG_PSERIES_MSI) += msi.o
powerpc: Move most remaining ppc64 files over to arch/powerpc Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 14:30:17 +08:00
[POWERPC] Move rtas_stop_self() into platforms/pseries/hotplug-cpu.c As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 14:52:36 +08:00
obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o
[POWERPC] Hotplug memory remove notifications for powerpc Hotplug memory remove notifier for 64-bit powerpc. This gets invoked by writing to /proc/ppc64/ofdt the string "remove_node " followed by the firmware device tree pathname of the node that needs to be removed. In response, this adjusts the sections and removes sysfs entries by calling __remove_pages(). Then it calls arch-specific code to get rid of the hardware MMU mappings for the section of memory. Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Reviewed-by: Michael Ellerman <michael@ellerman.id.au> Cc: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-19 04:33:50 +08:00
obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o
[POWERPC] Move rtas_stop_self() into platforms/pseries/hotplug-cpu.c As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-05 14:52:36 +08:00
powerpc: Move most remaining ppc64 files over to arch/powerpc Also deletes files in arch/ppc64 that are no longer used now that we don't compile with ARCH=ppc64 any more. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-14 14:30:17 +08:00
obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o
obj-$(CONFIG_HVCS) += hvcserver.o
[POWERPC] powerpc: Instrument Hypervisor Calls Add instrumentation for hypervisor calls on pseries. Call statistics include number of calls, wall time and cpu cycles (if available) and are made available via debugfs. Instrumentation code is behind the HCALL_STATS config option and has no impact if not enabled. Signed-off-by: Mike Kravetz <kravetz@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-07 07:23:12 +08:00
obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o
[POWERPC] pseries: phyp dump: Reserve and release memory Initial patch for reserving memory in early boot, and freeing it later. If the previous boot had ended with a crash, the reserved memory would contain a copy of the crashed kernel data. Signed-off-by: Manish Ahuja <mahuja@us.ibm.com> Signed-off-by: Linas Vepstas <linasvepstas@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-03-22 07:37:08 +08:00
obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o
powerpc/pseries: Add collaborative memory manager Adds a collaborative memory manager, which acts as a simple balloon driver for System p machines that support cooperative memory overcommitment (CMO). Adds a platform configuration option for CMO called PPC_SMLPAR. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-07-24 02:30:29 +08:00
obj-$(CONFIG_CMM) += cmm.o
powerpc: Add virtual processor dispatch trace log pseries SPLPAR machines are able to retrieve a log of dispatch and preempt events from the hypervisor. With this information, we can see when and why each dispatch & preempt is occuring. This change adds a set of debugfs files allowing userspace to read this dispatch log. Based on initial patches from Nishanth Aravamudan <nacc@us.ibm.com>. Signed-off-by: Jeremy Kerr <jk@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-12 01:55:52 +08:00
obj-$(CONFIG_DTL) += dtl.o