License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2013-04-30 06:06:10 +08:00
|
|
|
#undef TRACE_SYSTEM
|
|
|
|
|
#define TRACE_SYSTEM filemap
|
|
|
|
|
|
|
|
|
|
#if !defined(_TRACE_FILEMAP_H) || defined(TRACE_HEADER_MULTI_READ)
|
|
|
|
|
#define _TRACE_FILEMAP_H
|
|
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <linux/tracepoint.h>
|
|
|
|
|
#include <linux/mm.h>
|
|
|
|
|
#include <linux/memcontrol.h>
|
|
|
|
|
#include <linux/device.h>
|
|
|
|
|
#include <linux/kdev_t.h>
|
fs: new infrastructure for writeback error handling and reporting
Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.
The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.
If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.
This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.
In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.
One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.
This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.
This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).
Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.
The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
|
|
|
#include <linux/errseq.h>
|
2013-04-30 06:06:10 +08:00
|
|
|
|
|
|
|
|
DECLARE_EVENT_CLASS(mm_filemap_op_page_cache,
|
|
|
|
|
|
|
|
|
|
TP_PROTO(struct page *page),
|
|
|
|
|
|
|
|
|
|
TP_ARGS(page),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
2015-04-06 13:36:09 +08:00
|
|
|
__field(unsigned long, pfn)
|
2013-04-30 06:06:10 +08:00
|
|
|
__field(unsigned long, i_ino)
|
|
|
|
|
__field(unsigned long, index)
|
|
|
|
|
__field(dev_t, s_dev)
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
2015-04-06 13:36:09 +08:00
|
|
|
__entry->pfn = page_to_pfn(page);
|
2013-04-30 06:06:10 +08:00
|
|
|
__entry->i_ino = page->mapping->host->i_ino;
|
|
|
|
|
__entry->index = page->index;
|
|
|
|
|
if (page->mapping->host->i_sb)
|
|
|
|
|
__entry->s_dev = page->mapping->host->i_sb->s_dev;
|
|
|
|
|
else
|
|
|
|
|
__entry->s_dev = page->mapping->host->i_rdev;
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_printk("dev %d:%d ino %lx page=%p pfn=%lu ofs=%lu",
|
|
|
|
|
MAJOR(__entry->s_dev), MINOR(__entry->s_dev),
|
|
|
|
|
__entry->i_ino,
|
2015-04-06 13:36:09 +08:00
|
|
|
pfn_to_page(__entry->pfn),
|
|
|
|
|
__entry->pfn,
|
2013-04-30 06:06:10 +08:00
|
|
|
__entry->index << PAGE_SHIFT)
|
|
|
|
|
);
|
|
|
|
|
|
|
|
|
|
DEFINE_EVENT(mm_filemap_op_page_cache, mm_filemap_delete_from_page_cache,
|
|
|
|
|
TP_PROTO(struct page *page),
|
|
|
|
|
TP_ARGS(page)
|
|
|
|
|
);
|
|
|
|
|
|
|
|
|
|
DEFINE_EVENT(mm_filemap_op_page_cache, mm_filemap_add_to_page_cache,
|
|
|
|
|
TP_PROTO(struct page *page),
|
|
|
|
|
TP_ARGS(page)
|
|
|
|
|
);
|
|
|
|
|
|
fs: new infrastructure for writeback error handling and reporting
Most filesystems currently use mapping_set_error and
filemap_check_errors for setting and reporting/clearing writeback errors
at the mapping level. filemap_check_errors is indirectly called from
most of the filemap_fdatawait_* functions and from
filemap_write_and_wait*. These functions are called from all sorts of
contexts to wait on writeback to finish -- e.g. mostly in fsync, but
also in truncate calls, getattr, etc.
The non-fsync callers are problematic. We should be reporting writeback
errors during fsync, but many places spread over the tree clear out
errors before they can be properly reported, or report errors at
nonsensical times.
If I get -EIO on a stat() call, there is no reason for me to assume that
it is because some previous writeback failed. The fact that it also
clears out the error such that a subsequent fsync returns 0 is a bug,
and a nasty one since that's potentially silent data corruption.
This patch adds a small bit of new infrastructure for setting and
reporting errors during address_space writeback. While the above was my
original impetus for adding this, I think it's also the case that
current fsync semantics are just problematic for userland. Most
applications that call fsync do so to ensure that the data they wrote
has hit the backing store.
In the case where there are multiple writers to the file at the same
time, this is really hard to determine. The first one to call fsync will
see any stored error, and the rest get back 0. The processes with open
fds may not be associated with one another in any way. They could even
be in different containers, so ensuring coordination between all fsync
callers is not really an option.
One way to remedy this would be to track what file descriptor was used
to dirty the file, but that's rather cumbersome and would likely be
slow. However, there is a simpler way to improve the semantics here
without incurring too much overhead.
This set adds an errseq_t to struct address_space, and a corresponding
one is added to struct file. Writeback errors are recorded in the
mapping's errseq_t, and the one in struct file is used as the "since"
value.
This changes the semantics of the Linux fsync implementation such that
applications can now use it to determine whether there were any
writeback errors since fsync(fd) was last called (or since the file was
opened in the case of fsync having never been called).
Note that those writeback errors may have occurred when writing data
that was dirtied via an entirely different fd, but that's the case now
with the current mapping_set_error/filemap_check_error infrastructure.
This will at least prevent you from getting a false report of success.
The new behavior is still consistent with the POSIX spec, and is more
reliable for application developers. This patch just adds some basic
infrastructure for doing this, and ensures that the f_wb_err "cursor"
is properly set when a file is opened. Later patches will change the
existing code to use this new infrastructure for reporting errors at
fsync time.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
2017-07-06 19:02:25 +08:00
|
|
|
TRACE_EVENT(filemap_set_wb_err,
|
|
|
|
|
TP_PROTO(struct address_space *mapping, errseq_t eseq),
|
|
|
|
|
|
|
|
|
|
TP_ARGS(mapping, eseq),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
|
|
|
|
__field(unsigned long, i_ino)
|
|
|
|
|
__field(dev_t, s_dev)
|
|
|
|
|
__field(errseq_t, errseq)
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->i_ino = mapping->host->i_ino;
|
|
|
|
|
__entry->errseq = eseq;
|
|
|
|
|
if (mapping->host->i_sb)
|
|
|
|
|
__entry->s_dev = mapping->host->i_sb->s_dev;
|
|
|
|
|
else
|
|
|
|
|
__entry->s_dev = mapping->host->i_rdev;
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_printk("dev=%d:%d ino=0x%lx errseq=0x%x",
|
|
|
|
|
MAJOR(__entry->s_dev), MINOR(__entry->s_dev),
|
|
|
|
|
__entry->i_ino, __entry->errseq)
|
|
|
|
|
);
|
|
|
|
|
|
|
|
|
|
TRACE_EVENT(file_check_and_advance_wb_err,
|
|
|
|
|
TP_PROTO(struct file *file, errseq_t old),
|
|
|
|
|
|
|
|
|
|
TP_ARGS(file, old),
|
|
|
|
|
|
|
|
|
|
TP_STRUCT__entry(
|
|
|
|
|
__field(struct file *, file);
|
|
|
|
|
__field(unsigned long, i_ino)
|
|
|
|
|
__field(dev_t, s_dev)
|
|
|
|
|
__field(errseq_t, old)
|
|
|
|
|
__field(errseq_t, new)
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_fast_assign(
|
|
|
|
|
__entry->file = file;
|
|
|
|
|
__entry->i_ino = file->f_mapping->host->i_ino;
|
|
|
|
|
if (file->f_mapping->host->i_sb)
|
|
|
|
|
__entry->s_dev =
|
|
|
|
|
file->f_mapping->host->i_sb->s_dev;
|
|
|
|
|
else
|
|
|
|
|
__entry->s_dev =
|
|
|
|
|
file->f_mapping->host->i_rdev;
|
|
|
|
|
__entry->old = old;
|
|
|
|
|
__entry->new = file->f_wb_err;
|
|
|
|
|
),
|
|
|
|
|
|
|
|
|
|
TP_printk("file=%p dev=%d:%d ino=0x%lx old=0x%x new=0x%x",
|
|
|
|
|
__entry->file, MAJOR(__entry->s_dev),
|
|
|
|
|
MINOR(__entry->s_dev), __entry->i_ino, __entry->old,
|
|
|
|
|
__entry->new)
|
|
|
|
|
);
|
2013-04-30 06:06:10 +08:00
|
|
|
#endif /* _TRACE_FILEMAP_H */
|
|
|
|
|
|
|
|
|
|
/* This part must be outside protection */
|
|
|
|
|
#include <trace/define_trace.h>
|