linux/drivers/vhost/vdpa.c

950 lines
21 KiB
C
Raw Normal View History

vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018-2020 Intel Corporation.
* Copyright (C) 2020 Red Hat, Inc.
*
* Author: Tiwei Bie <tiwei.bie@intel.com>
* Jason Wang <jasowang@redhat.com>
*
* Thanks Michael S. Tsirkin for the valuable comments and
* suggestions. And thanks to Cunming Liang and Zhihong Wang for all
* their supports.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cdev.h>
#include <linux/device.h>
#include <linux/mm.h>
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
#include <linux/iommu.h>
#include <linux/uuid.h>
#include <linux/vdpa.h>
#include <linux/nospec.h>
#include <linux/vhost.h>
#include <linux/virtio_net.h>
#include <linux/kernel.h>
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
#include "vhost.h"
/* Currently, only network backend w/o multiqueue is supported. */
#define VHOST_VDPA_VQ_MAX 2
#define VHOST_VDPA_DEV_MAX (1U << MINORBITS)
struct vhost_vdpa {
struct vhost_dev vdev;
struct iommu_domain *domain;
struct vhost_virtqueue *vqs;
struct completion completion;
struct vdpa_device *vdpa;
struct device dev;
struct cdev cdev;
atomic_t opened;
int nvqs;
int virtio_id;
int minor;
struct eventfd_ctx *config_ctx;
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
};
static DEFINE_IDA(vhost_vdpa_ida);
static dev_t vhost_vdpa_major;
static void handle_vq_kick(struct vhost_work *work)
{
struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
poll.work);
struct vhost_vdpa *v = container_of(vq->dev, struct vhost_vdpa, vdev);
const struct vdpa_config_ops *ops = v->vdpa->config;
ops->kick_vq(v->vdpa, vq - v->vqs);
}
static irqreturn_t vhost_vdpa_virtqueue_cb(void *private)
{
struct vhost_virtqueue *vq = private;
struct eventfd_ctx *call_ctx = vq->call_ctx;
if (call_ctx)
eventfd_signal(call_ctx, 1);
return IRQ_HANDLED;
}
static irqreturn_t vhost_vdpa_config_cb(void *private)
{
struct vhost_vdpa *v = private;
struct eventfd_ctx *config_ctx = v->config_ctx;
if (config_ctx)
eventfd_signal(config_ctx, 1);
return IRQ_HANDLED;
}
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
static void vhost_vdpa_reset(struct vhost_vdpa *v)
{
struct vdpa_device *vdpa = v->vdpa;
vdpa_reset(vdpa);
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
}
static long vhost_vdpa_get_device_id(struct vhost_vdpa *v, u8 __user *argp)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
u32 device_id;
device_id = ops->get_device_id(vdpa);
if (copy_to_user(argp, &device_id, sizeof(device_id)))
return -EFAULT;
return 0;
}
static long vhost_vdpa_get_status(struct vhost_vdpa *v, u8 __user *statusp)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
u8 status;
status = ops->get_status(vdpa);
if (copy_to_user(statusp, &status, sizeof(status)))
return -EFAULT;
return 0;
}
static long vhost_vdpa_set_status(struct vhost_vdpa *v, u8 __user *statusp)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
u8 status;
if (copy_from_user(&status, statusp, sizeof(status)))
return -EFAULT;
/*
* Userspace shouldn't remove status bits unless reset the
* status to 0.
*/
if (status != 0 && (ops->get_status(vdpa) & ~status) != 0)
return -EINVAL;
ops->set_status(vdpa, status);
return 0;
}
static int vhost_vdpa_config_validate(struct vhost_vdpa *v,
struct vhost_vdpa_config *c)
{
long size = 0;
switch (v->virtio_id) {
case VIRTIO_ID_NET:
size = sizeof(struct virtio_net_config);
break;
}
if (c->len == 0)
return -EINVAL;
if (c->len > size - c->off)
return -E2BIG;
return 0;
}
static long vhost_vdpa_get_config(struct vhost_vdpa *v,
struct vhost_vdpa_config __user *c)
{
struct vdpa_device *vdpa = v->vdpa;
struct vhost_vdpa_config config;
unsigned long size = offsetof(struct vhost_vdpa_config, buf);
u8 *buf;
if (copy_from_user(&config, c, size))
return -EFAULT;
if (vhost_vdpa_config_validate(v, &config))
return -EINVAL;
buf = kvzalloc(config.len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
vdpa_get_config(vdpa, config.off, buf, config.len);
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
if (copy_to_user(c->buf, buf, config.len)) {
kvfree(buf);
return -EFAULT;
}
kvfree(buf);
return 0;
}
static long vhost_vdpa_set_config(struct vhost_vdpa *v,
struct vhost_vdpa_config __user *c)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
struct vhost_vdpa_config config;
unsigned long size = offsetof(struct vhost_vdpa_config, buf);
u8 *buf;
if (copy_from_user(&config, c, size))
return -EFAULT;
if (vhost_vdpa_config_validate(v, &config))
return -EINVAL;
buf = kvzalloc(config.len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (copy_from_user(buf, c->buf, config.len)) {
kvfree(buf);
return -EFAULT;
}
ops->set_config(vdpa, config.off, buf, config.len);
kvfree(buf);
return 0;
}
static long vhost_vdpa_get_features(struct vhost_vdpa *v, u64 __user *featurep)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
u64 features;
features = ops->get_features(vdpa);
if (copy_to_user(featurep, &features, sizeof(features)))
return -EFAULT;
return 0;
}
static long vhost_vdpa_set_features(struct vhost_vdpa *v, u64 __user *featurep)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
u64 features;
/*
* It's not allowed to change the features after they have
* been negotiated.
*/
if (ops->get_status(vdpa) & VIRTIO_CONFIG_S_FEATURES_OK)
return -EBUSY;
if (copy_from_user(&features, featurep, sizeof(features)))
return -EFAULT;
if (vdpa_set_features(vdpa, features))
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
return -EINVAL;
return 0;
}
static long vhost_vdpa_get_vring_num(struct vhost_vdpa *v, u16 __user *argp)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
u16 num;
num = ops->get_vq_num_max(vdpa);
if (copy_to_user(argp, &num, sizeof(num)))
return -EFAULT;
return 0;
}
static void vhost_vdpa_config_put(struct vhost_vdpa *v)
{
if (v->config_ctx)
eventfd_ctx_put(v->config_ctx);
}
static long vhost_vdpa_set_config_call(struct vhost_vdpa *v, u32 __user *argp)
{
struct vdpa_callback cb;
int fd;
struct eventfd_ctx *ctx;
cb.callback = vhost_vdpa_config_cb;
cb.private = v->vdpa;
if (copy_from_user(&fd, argp, sizeof(fd)))
return -EFAULT;
ctx = fd == VHOST_FILE_UNBIND ? NULL : eventfd_ctx_fdget(fd);
swap(ctx, v->config_ctx);
if (!IS_ERR_OR_NULL(ctx))
eventfd_ctx_put(ctx);
if (IS_ERR(v->config_ctx))
return PTR_ERR(v->config_ctx);
v->vdpa->config->set_config_cb(v->vdpa, &cb);
return 0;
}
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
static long vhost_vdpa_vring_ioctl(struct vhost_vdpa *v, unsigned int cmd,
void __user *argp)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
struct vdpa_callback cb;
struct vhost_virtqueue *vq;
struct vhost_vring_state s;
u32 idx;
long r;
r = get_user(idx, (u32 __user *)argp);
if (r < 0)
return r;
if (idx >= v->nvqs)
return -ENOBUFS;
idx = array_index_nospec(idx, v->nvqs);
vq = &v->vqs[idx];
if (cmd == VHOST_VDPA_SET_VRING_ENABLE) {
if (copy_from_user(&s, argp, sizeof(s)))
return -EFAULT;
ops->set_vq_ready(vdpa, idx, s.num);
return 0;
}
if (cmd == VHOST_GET_VRING_BASE)
vq->last_avail_idx = ops->get_vq_state(v->vdpa, idx);
r = vhost_vring_ioctl(&v->vdev, cmd, argp);
if (r)
return r;
switch (cmd) {
case VHOST_SET_VRING_ADDR:
if (ops->set_vq_address(vdpa, idx,
(u64)(uintptr_t)vq->desc,
(u64)(uintptr_t)vq->avail,
(u64)(uintptr_t)vq->used))
r = -EINVAL;
break;
case VHOST_SET_VRING_BASE:
if (ops->set_vq_state(vdpa, idx, vq->last_avail_idx))
r = -EINVAL;
break;
case VHOST_SET_VRING_CALL:
if (vq->call_ctx) {
cb.callback = vhost_vdpa_virtqueue_cb;
cb.private = vq;
} else {
cb.callback = NULL;
cb.private = NULL;
}
ops->set_vq_cb(vdpa, idx, &cb);
break;
case VHOST_SET_VRING_NUM:
ops->set_vq_num(vdpa, idx, vq->num);
break;
}
return r;
}
static long vhost_vdpa_unlocked_ioctl(struct file *filep,
unsigned int cmd, unsigned long arg)
{
struct vhost_vdpa *v = filep->private_data;
struct vhost_dev *d = &v->vdev;
void __user *argp = (void __user *)arg;
long r;
mutex_lock(&d->mutex);
switch (cmd) {
case VHOST_VDPA_GET_DEVICE_ID:
r = vhost_vdpa_get_device_id(v, argp);
break;
case VHOST_VDPA_GET_STATUS:
r = vhost_vdpa_get_status(v, argp);
break;
case VHOST_VDPA_SET_STATUS:
r = vhost_vdpa_set_status(v, argp);
break;
case VHOST_VDPA_GET_CONFIG:
r = vhost_vdpa_get_config(v, argp);
break;
case VHOST_VDPA_SET_CONFIG:
r = vhost_vdpa_set_config(v, argp);
break;
case VHOST_GET_FEATURES:
r = vhost_vdpa_get_features(v, argp);
break;
case VHOST_SET_FEATURES:
r = vhost_vdpa_set_features(v, argp);
break;
case VHOST_VDPA_GET_VRING_NUM:
r = vhost_vdpa_get_vring_num(v, argp);
break;
case VHOST_SET_LOG_BASE:
case VHOST_SET_LOG_FD:
r = -ENOIOCTLCMD;
break;
case VHOST_VDPA_SET_CONFIG_CALL:
r = vhost_vdpa_set_config_call(v, argp);
break;
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
default:
r = vhost_dev_ioctl(&v->vdev, cmd, argp);
if (r == -ENOIOCTLCMD)
r = vhost_vdpa_vring_ioctl(v, cmd, argp);
break;
}
mutex_unlock(&d->mutex);
return r;
}
static void vhost_vdpa_iotlb_unmap(struct vhost_vdpa *v, u64 start, u64 last)
{
struct vhost_dev *dev = &v->vdev;
struct vhost_iotlb *iotlb = dev->iotlb;
struct vhost_iotlb_map *map;
struct page *page;
unsigned long pfn, pinned;
while ((map = vhost_iotlb_itree_first(iotlb, start, last)) != NULL) {
pinned = map->size >> PAGE_SHIFT;
for (pfn = map->addr >> PAGE_SHIFT;
pinned > 0; pfn++, pinned--) {
page = pfn_to_page(pfn);
if (map->perm & VHOST_ACCESS_WO)
set_page_dirty_lock(page);
unpin_user_page(page);
}
atomic64_sub(map->size >> PAGE_SHIFT, &dev->mm->pinned_vm);
vhost_iotlb_map_free(iotlb, map);
}
}
static void vhost_vdpa_iotlb_free(struct vhost_vdpa *v)
{
struct vhost_dev *dev = &v->vdev;
vhost_vdpa_iotlb_unmap(v, 0ULL, 0ULL - 1);
kfree(dev->iotlb);
dev->iotlb = NULL;
}
static int perm_to_iommu_flags(u32 perm)
{
int flags = 0;
switch (perm) {
case VHOST_ACCESS_WO:
flags |= IOMMU_WRITE;
break;
case VHOST_ACCESS_RO:
flags |= IOMMU_READ;
break;
case VHOST_ACCESS_RW:
flags |= (IOMMU_WRITE | IOMMU_READ);
break;
default:
WARN(1, "invalidate vhost IOTLB permission\n");
break;
}
return flags | IOMMU_CACHE;
}
static int vhost_vdpa_map(struct vhost_vdpa *v,
u64 iova, u64 size, u64 pa, u32 perm)
{
struct vhost_dev *dev = &v->vdev;
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
int r = 0;
r = vhost_iotlb_add_range(dev->iotlb, iova, iova + size - 1,
pa, perm);
if (r)
return r;
if (ops->dma_map)
r = ops->dma_map(vdpa, iova, size, pa, perm);
else if (ops->set_map)
r = ops->set_map(vdpa, dev->iotlb);
else
r = iommu_map(v->domain, iova, pa, size,
perm_to_iommu_flags(perm));
return r;
}
static void vhost_vdpa_unmap(struct vhost_vdpa *v, u64 iova, u64 size)
{
struct vhost_dev *dev = &v->vdev;
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
vhost_vdpa_iotlb_unmap(v, iova, iova + size - 1);
if (ops->dma_map)
ops->dma_unmap(vdpa, iova, size);
else if (ops->set_map)
ops->set_map(vdpa, dev->iotlb);
else
iommu_unmap(v->domain, iova, size);
}
static int vhost_vdpa_process_iotlb_update(struct vhost_vdpa *v,
struct vhost_iotlb_msg *msg)
{
struct vhost_dev *dev = &v->vdev;
struct vhost_iotlb *iotlb = dev->iotlb;
struct page **page_list;
unsigned long list_size = PAGE_SIZE / sizeof(struct page *);
unsigned int gup_flags = FOLL_LONGTERM;
unsigned long npages, cur_base, map_pfn, last_pfn = 0;
unsigned long locked, lock_limit, pinned, i;
u64 iova = msg->iova;
int ret = 0;
if (vhost_iotlb_itree_first(iotlb, msg->iova,
msg->iova + msg->size - 1))
return -EEXIST;
page_list = (struct page **) __get_free_page(GFP_KERNEL);
if (!page_list)
return -ENOMEM;
if (msg->perm & VHOST_ACCESS_WO)
gup_flags |= FOLL_WRITE;
npages = PAGE_ALIGN(msg->size + (iova & ~PAGE_MASK)) >> PAGE_SHIFT;
if (!npages)
return -EINVAL;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:25 +08:00
mmap_read_lock(dev->mm);
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
locked = atomic64_add_return(npages, &dev->mm->pinned_vm);
lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
if (locked > lock_limit) {
ret = -ENOMEM;
goto out;
}
cur_base = msg->uaddr & PAGE_MASK;
iova &= PAGE_MASK;
while (npages) {
pinned = min_t(unsigned long, npages, list_size);
ret = pin_user_pages(cur_base, pinned,
gup_flags, page_list, NULL);
if (ret != pinned)
goto out;
if (!last_pfn)
map_pfn = page_to_pfn(page_list[0]);
for (i = 0; i < ret; i++) {
unsigned long this_pfn = page_to_pfn(page_list[i]);
u64 csize;
if (last_pfn && (this_pfn != last_pfn + 1)) {
/* Pin a contiguous chunk of memory */
csize = (last_pfn - map_pfn + 1) << PAGE_SHIFT;
if (vhost_vdpa_map(v, iova, csize,
map_pfn << PAGE_SHIFT,
msg->perm))
goto out;
map_pfn = this_pfn;
iova += csize;
}
last_pfn = this_pfn;
}
cur_base += ret << PAGE_SHIFT;
npages -= ret;
}
/* Pin the rest chunk */
ret = vhost_vdpa_map(v, iova, (last_pfn - map_pfn + 1) << PAGE_SHIFT,
map_pfn << PAGE_SHIFT, msg->perm);
out:
if (ret) {
vhost_vdpa_unmap(v, msg->iova, msg->size);
atomic64_sub(npages, &dev->mm->pinned_vm);
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:33:25 +08:00
mmap_read_unlock(dev->mm);
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
free_page((unsigned long)page_list);
return ret;
}
static int vhost_vdpa_process_iotlb_msg(struct vhost_dev *dev,
struct vhost_iotlb_msg *msg)
{
struct vhost_vdpa *v = container_of(dev, struct vhost_vdpa, vdev);
int r = 0;
r = vhost_dev_check_owner(dev);
if (r)
return r;
switch (msg->type) {
case VHOST_IOTLB_UPDATE:
r = vhost_vdpa_process_iotlb_update(v, msg);
break;
case VHOST_IOTLB_INVALIDATE:
vhost_vdpa_unmap(v, msg->iova, msg->size);
break;
default:
r = -EINVAL;
break;
}
return r;
}
static ssize_t vhost_vdpa_chr_write_iter(struct kiocb *iocb,
struct iov_iter *from)
{
struct file *file = iocb->ki_filp;
struct vhost_vdpa *v = file->private_data;
struct vhost_dev *dev = &v->vdev;
return vhost_chr_write_iter(dev, from);
}
static int vhost_vdpa_alloc_domain(struct vhost_vdpa *v)
{
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
struct device *dma_dev = vdpa_get_dma_dev(vdpa);
struct bus_type *bus;
int ret;
/* Device want to do DMA by itself */
if (ops->set_map || ops->dma_map)
return 0;
bus = dma_dev->bus;
if (!bus)
return -EFAULT;
if (!iommu_capable(bus, IOMMU_CAP_CACHE_COHERENCY))
return -ENOTSUPP;
v->domain = iommu_domain_alloc(bus);
if (!v->domain)
return -EIO;
ret = iommu_attach_device(v->domain, dma_dev);
if (ret)
goto err_attach;
return 0;
err_attach:
iommu_domain_free(v->domain);
return ret;
}
static void vhost_vdpa_free_domain(struct vhost_vdpa *v)
{
struct vdpa_device *vdpa = v->vdpa;
struct device *dma_dev = vdpa_get_dma_dev(vdpa);
if (v->domain) {
iommu_detach_device(v->domain, dma_dev);
iommu_domain_free(v->domain);
}
v->domain = NULL;
}
static int vhost_vdpa_open(struct inode *inode, struct file *filep)
{
struct vhost_vdpa *v;
struct vhost_dev *dev;
struct vhost_virtqueue **vqs;
int nvqs, i, r, opened;
v = container_of(inode->i_cdev, struct vhost_vdpa, cdev);
opened = atomic_cmpxchg(&v->opened, 0, 1);
if (opened)
return -EBUSY;
nvqs = v->nvqs;
vhost_vdpa_reset(v);
vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
if (!vqs) {
r = -ENOMEM;
goto err;
}
dev = &v->vdev;
for (i = 0; i < nvqs; i++) {
vqs[i] = &v->vqs[i];
vqs[i]->handle_kick = handle_vq_kick;
}
vhost_dev_init(dev, vqs, nvqs, 0, 0, 0, false,
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
vhost_vdpa_process_iotlb_msg);
dev->iotlb = vhost_iotlb_alloc(0, 0);
if (!dev->iotlb) {
r = -ENOMEM;
goto err_init_iotlb;
}
r = vhost_vdpa_alloc_domain(v);
if (r)
goto err_init_iotlb;
filep->private_data = v;
return 0;
err_init_iotlb:
vhost_dev_cleanup(&v->vdev);
err:
atomic_dec(&v->opened);
return r;
}
static int vhost_vdpa_release(struct inode *inode, struct file *filep)
{
struct vhost_vdpa *v = filep->private_data;
struct vhost_dev *d = &v->vdev;
mutex_lock(&d->mutex);
filep->private_data = NULL;
vhost_vdpa_reset(v);
vhost_dev_stop(&v->vdev);
vhost_vdpa_iotlb_free(v);
vhost_vdpa_free_domain(v);
vhost_vdpa_config_put(v);
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
vhost_dev_cleanup(&v->vdev);
kfree(v->vdev.vqs);
mutex_unlock(&d->mutex);
atomic_dec(&v->opened);
complete(&v->completion);
return 0;
}
#ifdef CONFIG_MMU
static vm_fault_t vhost_vdpa_fault(struct vm_fault *vmf)
{
struct vhost_vdpa *v = vmf->vma->vm_file->private_data;
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
struct vdpa_notification_area notify;
struct vm_area_struct *vma = vmf->vma;
u16 index = vma->vm_pgoff;
notify = ops->get_vq_notification(vdpa, index);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (remap_pfn_range(vma, vmf->address & PAGE_MASK,
notify.addr >> PAGE_SHIFT, PAGE_SIZE,
vma->vm_page_prot))
return VM_FAULT_SIGBUS;
return VM_FAULT_NOPAGE;
}
static const struct vm_operations_struct vhost_vdpa_vm_ops = {
.fault = vhost_vdpa_fault,
};
static int vhost_vdpa_mmap(struct file *file, struct vm_area_struct *vma)
{
struct vhost_vdpa *v = vma->vm_file->private_data;
struct vdpa_device *vdpa = v->vdpa;
const struct vdpa_config_ops *ops = vdpa->config;
struct vdpa_notification_area notify;
unsigned long index = vma->vm_pgoff;
if (vma->vm_end - vma->vm_start != PAGE_SIZE)
return -EINVAL;
if ((vma->vm_flags & VM_SHARED) == 0)
return -EINVAL;
if (vma->vm_flags & VM_READ)
return -EINVAL;
if (index > 65535)
return -EINVAL;
if (!ops->get_vq_notification)
return -ENOTSUPP;
/* To be safe and easily modelled by userspace, We only
* support the doorbell which sits on the page boundary and
* does not share the page with other registers.
*/
notify = ops->get_vq_notification(vdpa, index);
if (notify.addr & (PAGE_SIZE - 1))
return -EINVAL;
if (vma->vm_end - vma->vm_start != notify.size)
return -ENOTSUPP;
vma->vm_ops = &vhost_vdpa_vm_ops;
return 0;
}
#endif /* CONFIG_MMU */
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
static const struct file_operations vhost_vdpa_fops = {
.owner = THIS_MODULE,
.open = vhost_vdpa_open,
.release = vhost_vdpa_release,
.write_iter = vhost_vdpa_chr_write_iter,
.unlocked_ioctl = vhost_vdpa_unlocked_ioctl,
#ifdef CONFIG_MMU
.mmap = vhost_vdpa_mmap,
#endif /* CONFIG_MMU */
vhost: introduce vDPA-based backend This patch introduces a vDPA-based vhost backend. This backend is built on top of the same interface defined in virtio-vDPA and provides a generic vhost interface for userspace to accelerate the virtio devices in guest. This backend is implemented as a vDPA device driver on top of the same ops used in virtio-vDPA. It will create char device entry named vhost-vdpa-$index for userspace to use. Userspace can use vhost ioctls on top of this char device to setup the backend. Vhost ioctls are extended to make it type agnostic and behave like a virtio device, this help to eliminate type specific API like what vhost_net/scsi/vsock did: - VHOST_VDPA_GET_DEVICE_ID: get the virtio device ID which is defined by virtio specification to differ from different type of devices - VHOST_VDPA_GET_VRING_NUM: get the maximum size of virtqueue supported by the vDPA device - VHSOT_VDPA_SET/GET_STATUS: set and get virtio status of vDPA device - VHOST_VDPA_SET/GET_CONFIG: access virtio config space - VHOST_VDPA_SET_VRING_ENABLE: enable a specific virtqueue For memory mapping, IOTLB API is mandated for vhost-vDPA which means userspace drivers are required to use VHOST_IOTLB_UPDATE/VHOST_IOTLB_INVALIDATE to add or remove mapping for a specific userspace memory region. The vhost-vDPA API is designed to be type agnostic, but it allows net device only in current stage. Due to the lacking of control virtqueue support, some features were filter out by vhost-vdpa. We will enable more features and devices in the near future. Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-8-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 22:01:23 +08:00
.compat_ioctl = compat_ptr_ioctl,
};
static void vhost_vdpa_release_dev(struct device *device)
{
struct vhost_vdpa *v =
container_of(device, struct vhost_vdpa, dev);
ida_simple_remove(&vhost_vdpa_ida, v->minor);
kfree(v->vqs);
kfree(v);
}
static int vhost_vdpa_probe(struct vdpa_device *vdpa)
{
const struct vdpa_config_ops *ops = vdpa->config;
struct vhost_vdpa *v;
int minor, nvqs = VHOST_VDPA_VQ_MAX;
int r;
/* Currently, we only accept the network devices. */
if (ops->get_device_id(vdpa) != VIRTIO_ID_NET)
return -ENOTSUPP;
v = kzalloc(sizeof(*v), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
if (!v)
return -ENOMEM;
minor = ida_simple_get(&vhost_vdpa_ida, 0,
VHOST_VDPA_DEV_MAX, GFP_KERNEL);
if (minor < 0) {
kfree(v);
return minor;
}
atomic_set(&v->opened, 0);
v->minor = minor;
v->vdpa = vdpa;
v->nvqs = nvqs;
v->virtio_id = ops->get_device_id(vdpa);
device_initialize(&v->dev);
v->dev.release = vhost_vdpa_release_dev;
v->dev.parent = &vdpa->dev;
v->dev.devt = MKDEV(MAJOR(vhost_vdpa_major), minor);
v->vqs = kmalloc_array(nvqs, sizeof(struct vhost_virtqueue),
GFP_KERNEL);
if (!v->vqs) {
r = -ENOMEM;
goto err;
}
r = dev_set_name(&v->dev, "vhost-vdpa-%u", minor);
if (r)
goto err;
cdev_init(&v->cdev, &vhost_vdpa_fops);
v->cdev.owner = THIS_MODULE;
r = cdev_device_add(&v->cdev, &v->dev);
if (r)
goto err;
init_completion(&v->completion);
vdpa_set_drvdata(vdpa, v);
return 0;
err:
put_device(&v->dev);
return r;
}
static void vhost_vdpa_remove(struct vdpa_device *vdpa)
{
struct vhost_vdpa *v = vdpa_get_drvdata(vdpa);
int opened;
cdev_device_del(&v->cdev, &v->dev);
do {
opened = atomic_cmpxchg(&v->opened, 0, 1);
if (!opened)
break;
wait_for_completion(&v->completion);
} while (1);
put_device(&v->dev);
}
static struct vdpa_driver vhost_vdpa_driver = {
.driver = {
.name = "vhost_vdpa",
},
.probe = vhost_vdpa_probe,
.remove = vhost_vdpa_remove,
};
static int __init vhost_vdpa_init(void)
{
int r;
r = alloc_chrdev_region(&vhost_vdpa_major, 0, VHOST_VDPA_DEV_MAX,
"vhost-vdpa");
if (r)
goto err_alloc_chrdev;
r = vdpa_register_driver(&vhost_vdpa_driver);
if (r)
goto err_vdpa_register_driver;
return 0;
err_vdpa_register_driver:
unregister_chrdev_region(vhost_vdpa_major, VHOST_VDPA_DEV_MAX);
err_alloc_chrdev:
return r;
}
module_init(vhost_vdpa_init);
static void __exit vhost_vdpa_exit(void)
{
vdpa_unregister_driver(&vhost_vdpa_driver);
unregister_chrdev_region(vhost_vdpa_major, VHOST_VDPA_DEV_MAX);
}
module_exit(vhost_vdpa_exit);
MODULE_VERSION("0.0.1");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("vDPA-based vhost backend for virtio");