mirror of https://gitee.com/openkylin/linux.git
273 lines
6.7 KiB
C
273 lines
6.7 KiB
C
|
/*
|
||
|
* Copyright (C) 2015 Infineon Technologies AG
|
||
|
* Copyright (C) 2016 STMicroelectronics SAS
|
||
|
*
|
||
|
* Authors:
|
||
|
* Peter Huewe <peter.huewe@infineon.com>
|
||
|
* Christophe Ricard <christophe-h.ricard@st.com>
|
||
|
*
|
||
|
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
|
||
|
*
|
||
|
* Device driver for TCG/TCPA TPM (trusted platform module).
|
||
|
* Specifications at www.trustedcomputinggroup.org
|
||
|
*
|
||
|
* This device driver implements the TPM interface as defined in
|
||
|
* the TCG TPM Interface Spec version 1.3, revision 27 via _raw/native
|
||
|
* SPI access_.
|
||
|
*
|
||
|
* It is based on the original tpm_tis device driver from Leendert van
|
||
|
* Dorn and Kyleen Hall and Jarko Sakkinnen.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation, version 2 of the
|
||
|
* License.
|
||
|
*/
|
||
|
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/moduleparam.h>
|
||
|
#include <linux/slab.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/wait.h>
|
||
|
#include <linux/acpi.h>
|
||
|
#include <linux/freezer.h>
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/spi/spi.h>
|
||
|
#include <linux/gpio.h>
|
||
|
#include <linux/of_irq.h>
|
||
|
#include <linux/of_gpio.h>
|
||
|
#include <linux/tpm.h>
|
||
|
#include "tpm.h"
|
||
|
#include "tpm_tis_core.h"
|
||
|
|
||
|
#define MAX_SPI_FRAMESIZE 64
|
||
|
|
||
|
struct tpm_tis_spi_phy {
|
||
|
struct tpm_tis_data priv;
|
||
|
struct spi_device *spi_device;
|
||
|
|
||
|
u8 tx_buf[MAX_SPI_FRAMESIZE + 4];
|
||
|
u8 rx_buf[MAX_SPI_FRAMESIZE + 4];
|
||
|
};
|
||
|
|
||
|
static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
|
||
|
{
|
||
|
return container_of(data, struct tpm_tis_spi_phy, priv);
|
||
|
}
|
||
|
|
||
|
static int tpm_tis_spi_read_bytes(struct tpm_tis_data *data, u32 addr,
|
||
|
u16 len, u8 *result)
|
||
|
{
|
||
|
struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
|
||
|
int ret, i;
|
||
|
struct spi_message m;
|
||
|
struct spi_transfer spi_xfer = {
|
||
|
.tx_buf = phy->tx_buf,
|
||
|
.rx_buf = phy->rx_buf,
|
||
|
.len = 4,
|
||
|
};
|
||
|
|
||
|
if (len > MAX_SPI_FRAMESIZE)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
phy->tx_buf[0] = 0x80 | (len - 1);
|
||
|
phy->tx_buf[1] = 0xd4;
|
||
|
phy->tx_buf[2] = (addr >> 8) & 0xFF;
|
||
|
phy->tx_buf[3] = addr & 0xFF;
|
||
|
|
||
|
spi_xfer.cs_change = 1;
|
||
|
spi_message_init(&m);
|
||
|
spi_message_add_tail(&spi_xfer, &m);
|
||
|
|
||
|
spi_bus_lock(phy->spi_device->master);
|
||
|
ret = spi_sync_locked(phy->spi_device, &m);
|
||
|
if (ret < 0)
|
||
|
goto exit;
|
||
|
|
||
|
memset(phy->tx_buf, 0, len);
|
||
|
|
||
|
/* According to TCG PTP specification, if there is no TPM present at
|
||
|
* all, then the design has a weak pull-up on MISO. If a TPM is not
|
||
|
* present, a pull-up on MISO means that the SB controller sees a 1,
|
||
|
* and will latch in 0xFF on the read.
|
||
|
*/
|
||
|
for (i = 0; (phy->rx_buf[0] & 0x01) == 0 && i < TPM_RETRY; i++) {
|
||
|
spi_xfer.len = 1;
|
||
|
spi_message_init(&m);
|
||
|
spi_message_add_tail(&spi_xfer, &m);
|
||
|
ret = spi_sync_locked(phy->spi_device, &m);
|
||
|
if (ret < 0)
|
||
|
goto exit;
|
||
|
}
|
||
|
|
||
|
spi_xfer.cs_change = 0;
|
||
|
spi_xfer.len = len;
|
||
|
spi_xfer.rx_buf = result;
|
||
|
|
||
|
spi_message_init(&m);
|
||
|
spi_message_add_tail(&spi_xfer, &m);
|
||
|
ret = spi_sync_locked(phy->spi_device, &m);
|
||
|
|
||
|
exit:
|
||
|
spi_bus_unlock(phy->spi_device->master);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tpm_tis_spi_write_bytes(struct tpm_tis_data *data, u32 addr,
|
||
|
u16 len, u8 *value)
|
||
|
{
|
||
|
struct tpm_tis_spi_phy *phy = to_tpm_tis_spi_phy(data);
|
||
|
int ret, i;
|
||
|
struct spi_message m;
|
||
|
struct spi_transfer spi_xfer = {
|
||
|
.tx_buf = phy->tx_buf,
|
||
|
.rx_buf = phy->rx_buf,
|
||
|
.len = 4,
|
||
|
};
|
||
|
|
||
|
if (len > MAX_SPI_FRAMESIZE)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
phy->tx_buf[0] = len - 1;
|
||
|
phy->tx_buf[1] = 0xd4;
|
||
|
phy->tx_buf[2] = (addr >> 8) & 0xFF;
|
||
|
phy->tx_buf[3] = addr & 0xFF;
|
||
|
|
||
|
spi_xfer.cs_change = 1;
|
||
|
spi_message_init(&m);
|
||
|
spi_message_add_tail(&spi_xfer, &m);
|
||
|
|
||
|
spi_bus_lock(phy->spi_device->master);
|
||
|
ret = spi_sync_locked(phy->spi_device, &m);
|
||
|
if (ret < 0)
|
||
|
goto exit;
|
||
|
|
||
|
memset(phy->tx_buf, 0, len);
|
||
|
|
||
|
/* According to TCG PTP specification, if there is no TPM present at
|
||
|
* all, then the design has a weak pull-up on MISO. If a TPM is not
|
||
|
* present, a pull-up on MISO means that the SB controller sees a 1,
|
||
|
* and will latch in 0xFF on the read.
|
||
|
*/
|
||
|
for (i = 0; (phy->rx_buf[0] & 0x01) == 0 && i < TPM_RETRY; i++) {
|
||
|
spi_xfer.len = 1;
|
||
|
spi_message_init(&m);
|
||
|
spi_message_add_tail(&spi_xfer, &m);
|
||
|
ret = spi_sync_locked(phy->spi_device, &m);
|
||
|
if (ret < 0)
|
||
|
goto exit;
|
||
|
}
|
||
|
|
||
|
spi_xfer.len = len;
|
||
|
spi_xfer.tx_buf = value;
|
||
|
spi_xfer.cs_change = 0;
|
||
|
spi_xfer.tx_buf = value;
|
||
|
spi_message_init(&m);
|
||
|
spi_message_add_tail(&spi_xfer, &m);
|
||
|
ret = spi_sync_locked(phy->spi_device, &m);
|
||
|
|
||
|
exit:
|
||
|
spi_bus_unlock(phy->spi_device->master);
|
||
|
return ret;
|
||
|
}
|
||
|
|
||
|
static int tpm_tis_spi_read16(struct tpm_tis_data *data, u32 addr, u16 *result)
|
||
|
{
|
||
|
int rc;
|
||
|
|
||
|
rc = data->phy_ops->read_bytes(data, addr, sizeof(u16), (u8 *)result);
|
||
|
if (!rc)
|
||
|
*result = le16_to_cpu(*result);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int tpm_tis_spi_read32(struct tpm_tis_data *data, u32 addr, u32 *result)
|
||
|
{
|
||
|
int rc;
|
||
|
|
||
|
rc = data->phy_ops->read_bytes(data, addr, sizeof(u32), (u8 *)result);
|
||
|
if (!rc)
|
||
|
*result = le32_to_cpu(*result);
|
||
|
return rc;
|
||
|
}
|
||
|
|
||
|
static int tpm_tis_spi_write32(struct tpm_tis_data *data, u32 addr, u32 value)
|
||
|
{
|
||
|
value = cpu_to_le32(value);
|
||
|
return data->phy_ops->write_bytes(data, addr, sizeof(u32),
|
||
|
(u8 *)&value);
|
||
|
}
|
||
|
|
||
|
static const struct tpm_tis_phy_ops tpm_spi_phy_ops = {
|
||
|
.read_bytes = tpm_tis_spi_read_bytes,
|
||
|
.write_bytes = tpm_tis_spi_write_bytes,
|
||
|
.read16 = tpm_tis_spi_read16,
|
||
|
.read32 = tpm_tis_spi_read32,
|
||
|
.write32 = tpm_tis_spi_write32,
|
||
|
};
|
||
|
|
||
|
static int tpm_tis_spi_probe(struct spi_device *dev)
|
||
|
{
|
||
|
struct tpm_tis_spi_phy *phy;
|
||
|
|
||
|
phy = devm_kzalloc(&dev->dev, sizeof(struct tpm_tis_spi_phy),
|
||
|
GFP_KERNEL);
|
||
|
if (!phy)
|
||
|
return -ENOMEM;
|
||
|
|
||
|
phy->spi_device = dev;
|
||
|
|
||
|
return tpm_tis_core_init(&dev->dev, &phy->priv, -1, &tpm_spi_phy_ops,
|
||
|
NULL);
|
||
|
}
|
||
|
|
||
|
static SIMPLE_DEV_PM_OPS(tpm_tis_pm, tpm_pm_suspend, tpm_tis_resume);
|
||
|
|
||
|
static int tpm_tis_spi_remove(struct spi_device *dev)
|
||
|
{
|
||
|
struct tpm_chip *chip = spi_get_drvdata(dev);
|
||
|
|
||
|
tpm_chip_unregister(chip);
|
||
|
tpm_tis_remove(chip);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct spi_device_id tpm_tis_spi_id[] = {
|
||
|
{"tpm_tis_spi", 0},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(spi, tpm_tis_spi_id);
|
||
|
|
||
|
static const struct of_device_id of_tis_spi_match[] = {
|
||
|
{ .compatible = "st,st33htpm-spi", },
|
||
|
{ .compatible = "infineon,slb9670", },
|
||
|
{ .compatible = "tcg,tpm_tis-spi", },
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(of, of_tis_spi_match);
|
||
|
|
||
|
static const struct acpi_device_id acpi_tis_spi_match[] = {
|
||
|
{"SMO0768", 0},
|
||
|
{}
|
||
|
};
|
||
|
MODULE_DEVICE_TABLE(acpi, acpi_tis_spi_match);
|
||
|
|
||
|
static struct spi_driver tpm_tis_spi_driver = {
|
||
|
.driver = {
|
||
|
.owner = THIS_MODULE,
|
||
|
.name = "tpm_tis_spi",
|
||
|
.pm = &tpm_tis_pm,
|
||
|
.of_match_table = of_match_ptr(of_tis_spi_match),
|
||
|
.acpi_match_table = ACPI_PTR(acpi_tis_spi_match),
|
||
|
},
|
||
|
.probe = tpm_tis_spi_probe,
|
||
|
.remove = tpm_tis_spi_remove,
|
||
|
.id_table = tpm_tis_spi_id,
|
||
|
};
|
||
|
module_spi_driver(tpm_tis_spi_driver);
|
||
|
|
||
|
MODULE_DESCRIPTION("TPM Driver for native SPI access");
|
||
|
MODULE_LICENSE("GPL");
|