openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/am3517.dtsi

95 lines
2.1 KiB
Plaintext
Raw Normal View History

ARM: dts: Fix missing entries for am3517 On am3517 there are some extra devices compared to omap3.dtsi that we currently have not defined. Let's fix that by adding am3517.dtsi file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-07 06:20:16 +08:00
/*
* Device Tree Source for am3517 SoC
*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include "omap3.dtsi"
/ {
aliases {
serial3 = &uart4;
};
ocp {
am35x_otg_hs: am35x_otg_hs@5c040000 {
compatible = "ti,omap3-musb";
ti,hwmods = "am35x_otg_hs";
status = "disabled";
reg = <0x5c040000 0x1000>;
interrupts = <71>;
interrupt-names = "mc";
};
davinci_emac: ethernet@0x5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
reg = <0x5c000000 0x30000>;
interrupts = <67 68 69 70>;
ARM: dts: omap3: add minimal l4 bus layout with control module support This patch creates an l4_core interconnect for OMAP3, and moves some of the generic peripherals under it. System control module nodes are moved under this new interconnect also, and the SCM clock layout is changed to use the renamed SCM node as the clock provider. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reported-by: Tony Lindgren <tony@atomide.com>
2015-02-24 22:22:45 +08:00
syscon = <&scm_conf>;
ARM: dts: Fix missing entries for am3517 On am3517 there are some extra devices compared to omap3.dtsi that we currently have not defined. Let's fix that by adding am3517.dtsi file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-07 06:20:16 +08:00
ti,davinci-ctrl-reg-offset = <0x10000>;
ti,davinci-ctrl-mod-reg-offset = <0>;
ti,davinci-ctrl-ram-offset = <0x20000>;
ti,davinci-ctrl-ram-size = <0x2000>;
ti,davinci-rmii-en = /bits/ 8 <1>;
local-mac-address = [ 00 00 00 00 00 00 ];
};
davinci_mdio: ethernet@0x5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
reg = <0x5c030000 0x1000>;
bus_freq = <1000000>;
#address-cells = <1>;
#size-cells = <0>;
};
uart4: serial@4809e000 {
compatible = "ti,omap3-uart";
ti,hwmods = "uart4";
status = "disabled";
reg = <0x4809e000 0x400>;
interrupts = <84>;
dmas = <&sdma 55 &sdma 54>;
dma-names = "tx", "rx";
clock-frequency = <48000000>;
};
ARM: dts: add core2 padconf region for am3517 According to the technical reference manual for AM35xx system controller module (SCM) PADCONFS core registers are divided in two regions: 0x48002030..0x48002268 and 0x480025d8..0x480025fc. First region is the same for all omap3 SoC and is described in omap3.dtsi. The second region is the same as in omap34xx (see omap34xx.dtsi) and omap35xx. The patch adds missing description for the second region. This patch was tested on AM3517. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-11 05:27:53 +08:00
omap3_pmx_core2: pinmux@480025d8 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025d8 0x24>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0xff1f>;
};
ARM: dts: Fix missing entries for am3517 On am3517 there are some extra devices compared to omap3.dtsi that we currently have not defined. Let's fix that by adding am3517.dtsi file. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-07 06:20:16 +08:00
};
};
ARM: dts: AM35xx: use DT clock data AM35xx now uses the clock data from device tree. Most of the data is shared with OMAP3xxx, but as there is some delta, a new base .dtsi file is also created for the SoC. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-25 16:28:54 +08:00
ARM: dts: AM3517: Disable absent IPs inherited from OMAP3 AM3517 inherits OMAP3 dts file, but does not have all the IPs that are present on OMAP3. This patch disables the following absent IPs for AM3517: Mailbox, IVA, MMU_ISP, MPU_IVA SmartReflex. A label had to be added for IVA node in omap3.dtsi to be able to get a reference to the node for disabling. Otherwise we get the following warnings during booting: platform iva.2: Cannot lookup hwmod 'iva' platform 48094000.mailbox: Cannot lookup hwmod 'mailbox' platform 480bd400.mmu: Cannot lookup hwmod 'mmu_isp' platform 480c9000.smartreflex: Cannot lookup hwmod 'smartreflex_mpu_iva' Signed-off-by: Suman Anna <s-anna@ti.com> [tony@atomide.com: updated description for the warnings] Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-04-23 06:23:37 +08:00
&iva {
status = "disabled";
};
&mailbox {
status = "disabled";
};
&mmu_isp {
status = "disabled";
};
&smartreflex_mpu_iva {
status = "disabled";
};
ARM: dts: AM35xx: use DT clock data AM35xx now uses the clock data from device tree. Most of the data is shared with OMAP3xxx, but as there is some delta, a new base .dtsi file is also created for the SoC. Signed-off-by: Tero Kristo <t-kristo@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-07-25 16:28:54 +08:00
/include/ "am35xx-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"