linux/drivers/s390/crypto/ap_queue.c

759 lines
19 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright IBM Corp. 2016
* Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
*
* Adjunct processor bus, queue related code.
*/
#define KMSG_COMPONENT "ap"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/init.h>
#include <linux/slab.h>
#include <asm/facility.h>
#include "ap_bus.h"
#include "ap_debug.h"
static void __ap_flush_queue(struct ap_queue *aq);
/**
* ap_queue_enable_interruption(): Enable interruption on an AP queue.
* @qid: The AP queue number
* @ind: the notification indicator byte
*
* Enables interruption on AP queue via ap_aqic(). Based on the return
* value it waits a while and tests the AP queue if interrupts
* have been switched on using ap_test_queue().
*/
static int ap_queue_enable_interruption(struct ap_queue *aq, void *ind)
{
struct ap_queue_status status;
struct ap_qirq_ctrl qirqctrl = { 0 };
qirqctrl.ir = 1;
qirqctrl.isc = AP_ISC;
status = ap_aqic(aq->qid, qirqctrl, ind);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_OTHERWISE_CHANGED:
return 0;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
case AP_RESPONSE_INVALID_ADDRESS:
pr_err("Registering adapter interrupts for AP device %02x.%04x failed\n",
AP_QID_CARD(aq->qid),
AP_QID_QUEUE(aq->qid));
return -EOPNOTSUPP;
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
default:
return -EBUSY;
}
}
/**
* __ap_send(): Send message to adjunct processor queue.
* @qid: The AP queue number
* @psmid: The program supplied message identifier
* @msg: The message text
* @length: The message length
* @special: Special Bit
*
* Returns AP queue status structure.
* Condition code 1 on NQAP can't happen because the L bit is 1.
* Condition code 2 on NQAP also means the send is incomplete,
* because a segment boundary was reached. The NQAP is repeated.
*/
static inline struct ap_queue_status
__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
unsigned int special)
{
if (special == 1)
qid |= 0x400000UL;
return ap_nqap(qid, psmid, msg, length);
}
int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
{
struct ap_queue_status status;
status = __ap_send(qid, psmid, msg, length, 0);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
case AP_RESPONSE_Q_FULL:
case AP_RESPONSE_RESET_IN_PROGRESS:
return -EBUSY;
case AP_RESPONSE_REQ_FAC_NOT_INST:
return -EINVAL;
default: /* Device is gone. */
return -ENODEV;
}
}
EXPORT_SYMBOL(ap_send);
int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
{
struct ap_queue_status status;
if (msg == NULL)
return -EINVAL;
status = ap_dqap(qid, psmid, msg, length);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
case AP_RESPONSE_NO_PENDING_REPLY:
if (status.queue_empty)
return -ENOENT;
return -EBUSY;
case AP_RESPONSE_RESET_IN_PROGRESS:
return -EBUSY;
default:
return -ENODEV;
}
}
EXPORT_SYMBOL(ap_recv);
/* State machine definitions and helpers */
static enum ap_wait ap_sm_nop(struct ap_queue *aq)
{
return AP_WAIT_NONE;
}
/**
* ap_sm_recv(): Receive pending reply messages from an AP queue but do
* not change the state of the device.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static struct ap_queue_status ap_sm_recv(struct ap_queue *aq)
{
struct ap_queue_status status;
struct ap_message *ap_msg;
status = ap_dqap(aq->qid, &aq->reply->psmid,
aq->reply->message, aq->reply->length);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
aq->queue_count--;
if (aq->queue_count > 0)
mod_timer(&aq->timeout,
jiffies + aq->request_timeout);
list_for_each_entry(ap_msg, &aq->pendingq, list) {
if (ap_msg->psmid != aq->reply->psmid)
continue;
list_del_init(&ap_msg->list);
aq->pendingq_count--;
ap_msg->receive(aq, ap_msg, aq->reply);
break;
}
case AP_RESPONSE_NO_PENDING_REPLY:
if (!status.queue_empty || aq->queue_count <= 0)
break;
/* The card shouldn't forget requests but who knows. */
aq->queue_count = 0;
list_splice_init(&aq->pendingq, &aq->requestq);
aq->requestq_count += aq->pendingq_count;
aq->pendingq_count = 0;
break;
default:
break;
}
return status;
}
/**
* ap_sm_read(): Receive pending reply messages from an AP queue.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static enum ap_wait ap_sm_read(struct ap_queue *aq)
{
struct ap_queue_status status;
if (!aq->reply)
return AP_WAIT_NONE;
status = ap_sm_recv(aq);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
if (aq->queue_count > 0) {
aq->state = AP_STATE_WORKING;
return AP_WAIT_AGAIN;
}
aq->state = AP_STATE_IDLE;
return AP_WAIT_NONE;
case AP_RESPONSE_NO_PENDING_REPLY:
if (aq->queue_count > 0)
return AP_WAIT_INTERRUPT;
aq->state = AP_STATE_IDLE;
return AP_WAIT_NONE;
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_suspend_read(): Receive pending reply messages from an AP queue
* without changing the device state in between. In suspend mode we don't
* allow sending new requests, therefore just fetch pending replies.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE or AP_WAIT_AGAIN
*/
static enum ap_wait ap_sm_suspend_read(struct ap_queue *aq)
{
struct ap_queue_status status;
if (!aq->reply)
return AP_WAIT_NONE;
status = ap_sm_recv(aq);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
if (aq->queue_count > 0)
return AP_WAIT_AGAIN;
/* fall through */
default:
return AP_WAIT_NONE;
}
}
/**
* ap_sm_write(): Send messages from the request queue to an AP queue.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static enum ap_wait ap_sm_write(struct ap_queue *aq)
{
struct ap_queue_status status;
struct ap_message *ap_msg;
if (aq->requestq_count <= 0)
return AP_WAIT_NONE;
/* Start the next request on the queue. */
ap_msg = list_entry(aq->requestq.next, struct ap_message, list);
status = __ap_send(aq->qid, ap_msg->psmid,
ap_msg->message, ap_msg->length, ap_msg->special);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
aq->queue_count++;
if (aq->queue_count == 1)
mod_timer(&aq->timeout, jiffies + aq->request_timeout);
list_move_tail(&ap_msg->list, &aq->pendingq);
aq->requestq_count--;
aq->pendingq_count++;
if (aq->queue_count < aq->card->queue_depth) {
aq->state = AP_STATE_WORKING;
return AP_WAIT_AGAIN;
}
/* fall through */
case AP_RESPONSE_Q_FULL:
aq->state = AP_STATE_QUEUE_FULL;
return AP_WAIT_INTERRUPT;
case AP_RESPONSE_RESET_IN_PROGRESS:
aq->state = AP_STATE_RESET_WAIT;
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_MESSAGE_TOO_BIG:
case AP_RESPONSE_REQ_FAC_NOT_INST:
list_del_init(&ap_msg->list);
aq->requestq_count--;
ap_msg->rc = -EINVAL;
ap_msg->receive(aq, ap_msg, NULL);
return AP_WAIT_AGAIN;
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_read_write(): Send and receive messages to/from an AP queue.
* @aq: pointer to the AP queue
*
* Returns AP_WAIT_NONE, AP_WAIT_AGAIN, or AP_WAIT_INTERRUPT
*/
static enum ap_wait ap_sm_read_write(struct ap_queue *aq)
{
return min(ap_sm_read(aq), ap_sm_write(aq));
}
/**
* ap_sm_reset(): Reset an AP queue.
* @qid: The AP queue number
*
* Submit the Reset command to an AP queue.
*/
static enum ap_wait ap_sm_reset(struct ap_queue *aq)
{
struct ap_queue_status status;
status = ap_rapq(aq->qid);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
case AP_RESPONSE_RESET_IN_PROGRESS:
aq->state = AP_STATE_RESET_WAIT;
aq->interrupt = AP_INTR_DISABLED;
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_BUSY:
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_reset_wait(): Test queue for completion of the reset operation
* @aq: pointer to the AP queue
*
* Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
static enum ap_wait ap_sm_reset_wait(struct ap_queue *aq)
{
struct ap_queue_status status;
void *lsi_ptr;
if (aq->queue_count > 0 && aq->reply)
/* Try to read a completed message and get the status */
status = ap_sm_recv(aq);
else
/* Get the status with TAPQ */
status = ap_tapq(aq->qid, NULL);
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
lsi_ptr = ap_airq_ptr();
if (lsi_ptr && ap_queue_enable_interruption(aq, lsi_ptr) == 0)
aq->state = AP_STATE_SETIRQ_WAIT;
else
aq->state = (aq->queue_count > 0) ?
AP_STATE_WORKING : AP_STATE_IDLE;
return AP_WAIT_AGAIN;
case AP_RESPONSE_BUSY:
case AP_RESPONSE_RESET_IN_PROGRESS:
return AP_WAIT_TIMEOUT;
case AP_RESPONSE_Q_NOT_AVAIL:
case AP_RESPONSE_DECONFIGURED:
case AP_RESPONSE_CHECKSTOPPED:
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/**
* ap_sm_setirq_wait(): Test queue for completion of the irq enablement
* @aq: pointer to the AP queue
*
* Returns AP_POLL_IMMEDIATELY, AP_POLL_AFTER_TIMEROUT or 0.
*/
static enum ap_wait ap_sm_setirq_wait(struct ap_queue *aq)
{
struct ap_queue_status status;
if (aq->queue_count > 0 && aq->reply)
/* Try to read a completed message and get the status */
status = ap_sm_recv(aq);
else
/* Get the status with TAPQ */
status = ap_tapq(aq->qid, NULL);
if (status.irq_enabled == 1) {
/* Irqs are now enabled */
aq->interrupt = AP_INTR_ENABLED;
aq->state = (aq->queue_count > 0) ?
AP_STATE_WORKING : AP_STATE_IDLE;
}
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
if (aq->queue_count > 0)
return AP_WAIT_AGAIN;
/* fallthrough */
case AP_RESPONSE_NO_PENDING_REPLY:
return AP_WAIT_TIMEOUT;
default:
aq->state = AP_STATE_BORKED;
return AP_WAIT_NONE;
}
}
/*
* AP state machine jump table
*/
static ap_func_t *ap_jumptable[NR_AP_STATES][NR_AP_EVENTS] = {
[AP_STATE_RESET_START] = {
[AP_EVENT_POLL] = ap_sm_reset,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_RESET_WAIT] = {
[AP_EVENT_POLL] = ap_sm_reset_wait,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_SETIRQ_WAIT] = {
[AP_EVENT_POLL] = ap_sm_setirq_wait,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_IDLE] = {
[AP_EVENT_POLL] = ap_sm_write,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_WORKING] = {
[AP_EVENT_POLL] = ap_sm_read_write,
[AP_EVENT_TIMEOUT] = ap_sm_reset,
},
[AP_STATE_QUEUE_FULL] = {
[AP_EVENT_POLL] = ap_sm_read,
[AP_EVENT_TIMEOUT] = ap_sm_reset,
},
[AP_STATE_SUSPEND_WAIT] = {
[AP_EVENT_POLL] = ap_sm_suspend_read,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
[AP_STATE_BORKED] = {
[AP_EVENT_POLL] = ap_sm_nop,
[AP_EVENT_TIMEOUT] = ap_sm_nop,
},
};
enum ap_wait ap_sm_event(struct ap_queue *aq, enum ap_event event)
{
return ap_jumptable[aq->state][event](aq);
}
enum ap_wait ap_sm_event_loop(struct ap_queue *aq, enum ap_event event)
{
enum ap_wait wait;
while ((wait = ap_sm_event(aq, event)) == AP_WAIT_AGAIN)
;
return wait;
}
/*
* Power management for queue devices
*/
void ap_queue_suspend(struct ap_device *ap_dev)
{
struct ap_queue *aq = to_ap_queue(&ap_dev->device);
/* Poll on the device until all requests are finished. */
spin_lock_bh(&aq->lock);
aq->state = AP_STATE_SUSPEND_WAIT;
while (ap_sm_event(aq, AP_EVENT_POLL) != AP_WAIT_NONE)
;
aq->state = AP_STATE_BORKED;
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_suspend);
void ap_queue_resume(struct ap_device *ap_dev)
{
}
EXPORT_SYMBOL(ap_queue_resume);
/*
* AP queue related attributes.
*/
static ssize_t request_count_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
unsigned int req_cnt;
spin_lock_bh(&aq->lock);
req_cnt = aq->total_request_count;
spin_unlock_bh(&aq->lock);
return snprintf(buf, PAGE_SIZE, "%d\n", req_cnt);
}
static ssize_t request_count_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ap_queue *aq = to_ap_queue(dev);
spin_lock_bh(&aq->lock);
aq->total_request_count = 0;
spin_unlock_bh(&aq->lock);
return count;
}
static DEVICE_ATTR_RW(request_count);
static ssize_t requestq_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
unsigned int reqq_cnt = 0;
spin_lock_bh(&aq->lock);
reqq_cnt = aq->requestq_count;
spin_unlock_bh(&aq->lock);
return snprintf(buf, PAGE_SIZE, "%d\n", reqq_cnt);
}
static DEVICE_ATTR_RO(requestq_count);
static ssize_t pendingq_count_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
unsigned int penq_cnt = 0;
spin_lock_bh(&aq->lock);
penq_cnt = aq->pendingq_count;
spin_unlock_bh(&aq->lock);
return snprintf(buf, PAGE_SIZE, "%d\n", penq_cnt);
}
static DEVICE_ATTR_RO(pendingq_count);
static ssize_t reset_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
int rc = 0;
spin_lock_bh(&aq->lock);
switch (aq->state) {
case AP_STATE_RESET_START:
case AP_STATE_RESET_WAIT:
rc = snprintf(buf, PAGE_SIZE, "Reset in progress.\n");
break;
case AP_STATE_WORKING:
case AP_STATE_QUEUE_FULL:
rc = snprintf(buf, PAGE_SIZE, "Reset Timer armed.\n");
break;
default:
rc = snprintf(buf, PAGE_SIZE, "No Reset Timer set.\n");
}
spin_unlock_bh(&aq->lock);
return rc;
}
static ssize_t reset_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct ap_queue *aq = to_ap_queue(dev);
spin_lock_bh(&aq->lock);
__ap_flush_queue(aq);
aq->state = AP_STATE_RESET_START;
ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
AP_DBF(DBF_INFO, "reset queue=%02x.%04x triggered by user\n",
AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid));
return count;
}
static DEVICE_ATTR_RW(reset);
static ssize_t interrupt_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ap_queue *aq = to_ap_queue(dev);
int rc = 0;
spin_lock_bh(&aq->lock);
if (aq->state == AP_STATE_SETIRQ_WAIT)
rc = snprintf(buf, PAGE_SIZE, "Enable Interrupt pending.\n");
else if (aq->interrupt == AP_INTR_ENABLED)
rc = snprintf(buf, PAGE_SIZE, "Interrupts enabled.\n");
else
rc = snprintf(buf, PAGE_SIZE, "Interrupts disabled.\n");
spin_unlock_bh(&aq->lock);
return rc;
}
static DEVICE_ATTR_RO(interrupt);
static struct attribute *ap_queue_dev_attrs[] = {
&dev_attr_request_count.attr,
&dev_attr_requestq_count.attr,
&dev_attr_pendingq_count.attr,
&dev_attr_reset.attr,
&dev_attr_interrupt.attr,
NULL
};
static struct attribute_group ap_queue_dev_attr_group = {
.attrs = ap_queue_dev_attrs
};
static const struct attribute_group *ap_queue_dev_attr_groups[] = {
&ap_queue_dev_attr_group,
NULL
};
static struct device_type ap_queue_type = {
.name = "ap_queue",
.groups = ap_queue_dev_attr_groups,
};
static void ap_queue_device_release(struct device *dev)
{
struct ap_queue *aq = to_ap_queue(dev);
if (!list_empty(&aq->list)) {
spin_lock_bh(&ap_list_lock);
list_del_init(&aq->list);
spin_unlock_bh(&ap_list_lock);
}
kfree(aq);
}
struct ap_queue *ap_queue_create(ap_qid_t qid, int device_type)
{
struct ap_queue *aq;
aq = kzalloc(sizeof(*aq), GFP_KERNEL);
if (!aq)
return NULL;
aq->ap_dev.device.release = ap_queue_device_release;
aq->ap_dev.device.type = &ap_queue_type;
aq->ap_dev.device_type = device_type;
aq->qid = qid;
aq->state = AP_STATE_RESET_START;
aq->interrupt = AP_INTR_DISABLED;
spin_lock_init(&aq->lock);
INIT_LIST_HEAD(&aq->list);
INIT_LIST_HEAD(&aq->pendingq);
INIT_LIST_HEAD(&aq->requestq);
timer_setup(&aq->timeout, ap_request_timeout, 0);
return aq;
}
void ap_queue_init_reply(struct ap_queue *aq, struct ap_message *reply)
{
aq->reply = reply;
spin_lock_bh(&aq->lock);
ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_init_reply);
/**
* ap_queue_message(): Queue a request to an AP device.
* @aq: The AP device to queue the message to
* @ap_msg: The message that is to be added
*/
void ap_queue_message(struct ap_queue *aq, struct ap_message *ap_msg)
{
/* For asynchronous message handling a valid receive-callback
* is required.
*/
BUG_ON(!ap_msg->receive);
spin_lock_bh(&aq->lock);
/* Queue the message. */
list_add_tail(&ap_msg->list, &aq->requestq);
aq->requestq_count++;
aq->total_request_count++;
atomic_inc(&aq->card->total_request_count);
/* Send/receive as many request from the queue as possible. */
ap_wait(ap_sm_event_loop(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_message);
/**
* ap_cancel_message(): Cancel a crypto request.
* @aq: The AP device that has the message queued
* @ap_msg: The message that is to be removed
*
* Cancel a crypto request. This is done by removing the request
* from the device pending or request queue. Note that the
* request stays on the AP queue. When it finishes the message
* reply will be discarded because the psmid can't be found.
*/
void ap_cancel_message(struct ap_queue *aq, struct ap_message *ap_msg)
{
struct ap_message *tmp;
spin_lock_bh(&aq->lock);
if (!list_empty(&ap_msg->list)) {
list_for_each_entry(tmp, &aq->pendingq, list)
if (tmp->psmid == ap_msg->psmid) {
aq->pendingq_count--;
goto found;
}
aq->requestq_count--;
found:
list_del_init(&ap_msg->list);
}
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_cancel_message);
/**
* __ap_flush_queue(): Flush requests.
* @aq: Pointer to the AP queue
*
* Flush all requests from the request/pending queue of an AP device.
*/
static void __ap_flush_queue(struct ap_queue *aq)
{
struct ap_message *ap_msg, *next;
list_for_each_entry_safe(ap_msg, next, &aq->pendingq, list) {
list_del_init(&ap_msg->list);
aq->pendingq_count--;
ap_msg->rc = -EAGAIN;
ap_msg->receive(aq, ap_msg, NULL);
}
list_for_each_entry_safe(ap_msg, next, &aq->requestq, list) {
list_del_init(&ap_msg->list);
aq->requestq_count--;
ap_msg->rc = -EAGAIN;
ap_msg->receive(aq, ap_msg, NULL);
}
}
void ap_flush_queue(struct ap_queue *aq)
{
spin_lock_bh(&aq->lock);
__ap_flush_queue(aq);
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_flush_queue);
void ap_queue_remove(struct ap_queue *aq)
{
ap_flush_queue(aq);
del_timer_sync(&aq->timeout);
s390/zcrypt: reinit ap queue state machine during device probe Until the vfio-ap driver came into live there was a well known agreement about the way how ap devices are initialized and their states when the driver's probe function is called. However, the vfio device driver when receiving an ap queue device does additional resets thereby removing the registration for interrupts for the ap device done by the ap bus core code. So when later the vfio driver releases the device and one of the default zcrypt drivers takes care of the device the interrupt registration needs to get renewed. The current code does no renew and result is that requests send into such a queue will never see a reply processed - the application hangs. This patch adds a function which resets the aq queue state machine for the ap queue device and triggers the walk through the initial states (which are reset and registration for interrupts). This function is now called before the driver's probe function is invoked. When the association between driver and device is released, the driver's remove function is called. The current implementation calls a ap queue function ap_queue_remove(). This invokation has been moved to the ap bus function to make the probe / remove pair for ap bus and drivers more symmetric. Fixes: 7e0bdbe5c21c ("s390/zcrypt: AP bus support for alternate driver(s)") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewd-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewd-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-09 21:59:24 +08:00
/* reset with zero, also clears irq registration */
spin_lock_bh(&aq->lock);
ap_zapq(aq->qid);
aq->state = AP_STATE_BORKED;
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_remove);
s390/zcrypt: reinit ap queue state machine during device probe Until the vfio-ap driver came into live there was a well known agreement about the way how ap devices are initialized and their states when the driver's probe function is called. However, the vfio device driver when receiving an ap queue device does additional resets thereby removing the registration for interrupts for the ap device done by the ap bus core code. So when later the vfio driver releases the device and one of the default zcrypt drivers takes care of the device the interrupt registration needs to get renewed. The current code does no renew and result is that requests send into such a queue will never see a reply processed - the application hangs. This patch adds a function which resets the aq queue state machine for the ap queue device and triggers the walk through the initial states (which are reset and registration for interrupts). This function is now called before the driver's probe function is invoked. When the association between driver and device is released, the driver's remove function is called. The current implementation calls a ap queue function ap_queue_remove(). This invokation has been moved to the ap bus function to make the probe / remove pair for ap bus and drivers more symmetric. Fixes: 7e0bdbe5c21c ("s390/zcrypt: AP bus support for alternate driver(s)") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewd-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewd-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-09 21:59:24 +08:00
void ap_queue_reinit_state(struct ap_queue *aq)
{
spin_lock_bh(&aq->lock);
aq->state = AP_STATE_RESET_START;
ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
spin_unlock_bh(&aq->lock);
}
EXPORT_SYMBOL(ap_queue_reinit_state);