openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/wireless/ti/wlcore/init.h

41 lines
1.4 KiB
C
Raw Normal View History

wl1271: add wl1271 driver files This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-06 21:25:28 +08:00
/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
wl1271: Change wl12xx Files Names All files name prefix removed due to the fact that wl12xx driver supports wl1271 and wl1273. Also the definition in Kconfig and header files changed respectively. Signed-off-by: Shahar Levi <shahar_levi@ti.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
2010-11-08 19:20:10 +08:00
#ifndef __INIT_H__
#define __INIT_H__
wl1271: add wl1271 driver files This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-06 21:25:28 +08:00
wl12xx/wlcore: move wl1271 struct to wlcore and add ops In order to add chip-specific operations and prepare for future elements that need to be set by the lower driver, move the wl1271 structure to the wlcore.h file and add an empty placeholder for the operations structure. Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-11-22 01:25:24 +08:00
#include "wlcore.h"
wl1271: add wl1271 driver files This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-06 21:25:28 +08:00
int wl1271_hw_init_power_auth(struct wl1271 *wl);
wl12xx: start reworking the init sequence Split the init sequence into common commands (non role-specific) and role-specific commands. We still need to call the common commands only on add_interface() (rather than on start()) as the fw must get the mac address when uploading the nvs. Future patches will refactor the init sequence further more. Signed-off-by: Eliad Peller <eliad@wizery.com> [fixed a couple of sparse warnings] Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-05 17:55:40 +08:00
int wl1271_init_templates_config(struct wl1271 *wl);
wl1271: add most of the normal initialization commands to PLT mode We need to configure PLT mode almost in the same way as normal mode. Most of the configuration functions need to be called also when entering PLT, with the exception of a few RX and TX configuration (which cause mac80211 warnings if enable while runnning PLT tests). Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-18 19:25:44 +08:00
int wl1271_init_pta(struct wl1271 *wl);
int wl1271_init_energy_detection(struct wl1271 *wl);
wl12xx: 1281/1283 support - Add acx commands New acx command that sets: Rx fifo enable reduced bus transactions in RX path. Tx bus transactions padding to SDIO block size that improve preference in Tx and essential for working with SDIO HS (48Mhz). The max SDIO block size is 256 when working with Tx bus transactions padding to SDIO block. Add new ops to SDIO & SPI that handles the win size change in case of transactions padding (relevant only for SDIO). [Fix endianess issues; simplify sdio-specific block_size handling; minor changes in comments; use "aligned_len" in one calculation instead of "pad" to avoid confusion -- Luca] Signed-off-by: Shahar Levi <shahar_levi@ti.com> Reviewed-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-03-06 22:32:08 +08:00
int wl1271_chip_specific_init(struct wl1271 *wl);
wl12xx: start reworking the init sequence Split the init sequence into common commands (non role-specific) and role-specific commands. We still need to call the common commands only on add_interface() (rather than on start()) as the fw must get the mac address when uploading the nvs. Future patches will refactor the init sequence further more. Signed-off-by: Eliad Peller <eliad@wizery.com> [fixed a couple of sparse warnings] Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-05 17:55:40 +08:00
int wl1271_hw_init(struct wl1271 *wl);
int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif);
wl12xx: define wl12xx_vif Define a per-vif data struct. This struct holds all the vif-specifc data, which is currently being hold by the global wl struct. Start by moving the basic_rate_set field into it. NOTE: in order to make the patches a bit smaller, start by using wl->vif in some functions, instead of changing all the function prototypes at once. finally, wl->vif will be removed altogether. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-05 17:55:41 +08:00
int wl1271_init_ap_rates(struct wl1271 *wl, struct wl12xx_vif *wlvif);
wl12xx: replace wl->mac_addr with vif->addr The mac address of the interface already exists in vif->addr. Use it instead of wl->mac_addr. It seems that due to some fw bug, we still need to set nvs->mac to the actual mac addresss, otherwise the fw doesn't function well (e.g. can't get dhcp address). Thus, use wl->mac_addr for this purpose, and don't delete it yet. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-05 17:55:39 +08:00
int wl1271_ap_init_templates(struct wl1271 *wl, struct ieee80211_vif *vif);
wlcore: add p2p device support When starting a p2p mgmt interface, enable its device role. This allows us to keep the sta role disabled and scan on the dev role. In general, p2p management interfaces cannot send vif-specific commands to FW, as the vif role id is invalid. Only off-channel data and scans happen on this vif, so most ops are not relevant. If the vif is a p2p mgmt vif, block some mac80211 ops. Configure rate policies for p2p mgmt interface, as otherwise p2p packets come out with arbitrary rates. Since wpa_supplicant currently doesn't support standalone p2p device mode (without another attached managed interface), add p2p device to the allowed interface combinations without decreasing the allowed station count. Moreover, increase the station count in some cases, as AP mode usually starts as station interface, and the AP interface is now different from the p2p management one). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-31 03:38:22 +08:00
int wl1271_sta_hw_init(struct wl1271 *wl, struct wl12xx_vif *wlvif);
wl1271: add wl1271 driver files This driver supports the wl1271 chipset from Texas Instruments based on the WiLink(tm) 6.0 mobile platform. Support for wl1273 should be relatively easy to add. This chipset is designed for embedded devices, with good powersaving capabilities. The wl1271 chipset is the successor of wl1251 and supports the 802.11b/g/n standards, but currently this driver supports only b/g. More information about this chipset can be found here: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993 Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-06 21:25:28 +08:00
#endif