openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/video/fbdev/amba-clcd.c

972 lines
22 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* linux/drivers/video/amba-clcd.c
*
* Copyright (C) 2001 ARM Limited, by David A Rusling
* Updated to 2.5, Deep Blue Solutions Ltd.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*
* ARM PrimeCell PL110 Color LCD Controller
*/
DMA-API: video: clcd: add dma_set_mask_and_coherent() call The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-27 17:29:32 +08:00
#include <linux/dma-mapping.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/list.h>
[ARM] Move AMBA include files to include/linux/amba/ Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07 21:52:45 +08:00
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
video: ARM CLCD: Fix calculation of bits-per-pixel If the device-tree specifies a max-memory-bandwidth property then the CLCD driver uses that to calculate the bits-per-pixel supported, however, this calculation is faulty for two reasons. 1. It doesn't ensure that the result is a sane value, i.e. a power of 2 and <= 32 as the rest of the code assumes. 2. It uses the displayed resolution and calculates the average bandwidth across the whole frame. It should instead calculate the peak bandwidth based on the pixel clock. This patch fixes both the above. Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-20 20:41:04 +08:00
#include <linux/bitops.h>
[ARM] Move asm/hardware/clock.h to linux/clk.h This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08 00:15:52 +08:00
#include <linux/clk.h>
[ARM] Fix realview build arch/arm/mach-realview/platsmp.c:140: error: 'jiffies' undeclared (first use in this function) drivers/amba/bus.c:246: error: 'NO_IRQ' undeclared (first use in this function) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-08 17:58:51 +08:00
#include <linux/hardirq.h>
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_graph.h>
video: ARM CLCD: backlight support for OF If the device is probed from device tree, we can support backlight. This is used with some systems such as the ST Microelectronics Nomadik. We have to add HAS_IOMEM to the dependencies of CLCD since the backlight class device will now be selected, and if it gets selected on an arch that does not have IOMEM, compilation will fail. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-06-16 17:36:13 +08:00
#include <linux/backlight.h>
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
#include <video/display_timing.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define to_clcd(info) container_of(info, struct clcd_fb, fb)
/* This is limited to 16 characters when displayed by X startup */
static const char *clcd_name = "CLCD FB";
/*
* Unfortunately, the enable/disable functions may be called either from
* process or IRQ context, and we _need_ to delay. This is _not_ good.
*/
static inline void clcdfb_sleep(unsigned int ms)
{
if (in_atomic()) {
mdelay(ms);
} else {
msleep(ms);
}
}
static inline void clcdfb_set_start(struct clcd_fb *fb)
{
unsigned long ustart = fb->fb.fix.smem_start;
unsigned long lstart;
ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
writel(ustart, fb->regs + CLCD_UBAS);
writel(lstart, fb->regs + CLCD_LBAS);
}
static void clcdfb_disable(struct clcd_fb *fb)
{
u32 val;
if (fb->board->disable)
fb->board->disable(fb);
video: ARM CLCD: backlight support for OF If the device is probed from device tree, we can support backlight. This is used with some systems such as the ST Microelectronics Nomadik. We have to add HAS_IOMEM to the dependencies of CLCD since the backlight class device will now be selected, and if it gets selected on an arch that does not have IOMEM, compilation will fail. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-06-16 17:36:13 +08:00
if (fb->panel->backlight) {
fb->panel->backlight->props.power = FB_BLANK_POWERDOWN;
backlight_update_status(fb->panel->backlight);
}
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
val = readl(fb->regs + fb->off_cntl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (val & CNTL_LCDPWR) {
val &= ~CNTL_LCDPWR;
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
writel(val, fb->regs + fb->off_cntl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
clcdfb_sleep(20);
}
if (val & CNTL_LCDEN) {
val &= ~CNTL_LCDEN;
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
writel(val, fb->regs + fb->off_cntl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Disable CLCD clock source.
*/
VIDEO: amba clcd: don't disable an already disabled clock Fix the clock enable/disable tracking in the AMBA CLCD driver so that the driver doesn't try to disable an already disabled clock, thereby causing the clock (if shared) to become unbalanced. This resolves a problem with CLCD on LPC32xx ARM platforms. Reported-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-18 05:13:22 +08:00
if (fb->clk_enabled) {
fb->clk_enabled = false;
clk_disable(fb->clk);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
{
/*
* Enable the CLCD clock source.
*/
VIDEO: amba clcd: don't disable an already disabled clock Fix the clock enable/disable tracking in the AMBA CLCD driver so that the driver doesn't try to disable an already disabled clock, thereby causing the clock (if shared) to become unbalanced. This resolves a problem with CLCD on LPC32xx ARM platforms. Reported-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-18 05:13:22 +08:00
if (!fb->clk_enabled) {
fb->clk_enabled = true;
clk_enable(fb->clk);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Bring up by first enabling..
*/
cntl |= CNTL_LCDEN;
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
writel(cntl, fb->regs + fb->off_cntl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
clcdfb_sleep(20);
/*
* and now apply power.
*/
cntl |= CNTL_LCDPWR;
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
writel(cntl, fb->regs + fb->off_cntl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
video: ARM CLCD: backlight support for OF If the device is probed from device tree, we can support backlight. This is used with some systems such as the ST Microelectronics Nomadik. We have to add HAS_IOMEM to the dependencies of CLCD since the backlight class device will now be selected, and if it gets selected on an arch that does not have IOMEM, compilation will fail. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-06-16 17:36:13 +08:00
/*
* Turn on backlight
*/
if (fb->panel->backlight) {
fb->panel->backlight->props.power = FB_BLANK_UNBLANK;
backlight_update_status(fb->panel->backlight);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* finally, enable the interface.
*/
if (fb->board->enable)
fb->board->enable(fb);
}
static int
clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
{
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
u32 caps;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ret = 0;
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
if (fb->panel->caps && fb->board->caps)
caps = fb->panel->caps & fb->board->caps;
else {
/* Old way of specifying what can be used */
caps = fb->panel->cntl & CNTL_BGR ?
CLCD_CAP_BGR : CLCD_CAP_RGB;
/* But mask out 444 modes as they weren't supported */
caps &= ~CLCD_CAP_444;
}
/* Only TFT panels can do RGB888/BGR888 */
if (!(fb->panel->cntl & CNTL_LCDTFT))
caps &= ~CLCD_CAP_888;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memset(&var->transp, 0, sizeof(var->transp));
[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp Some folk want to use RGB555 rather tahn RGB565 with amba-clcd. Allow amba-clcd to accept either pixel format. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 22:12:06 +08:00
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
switch (var->bits_per_pixel) {
case 1:
case 2:
case 4:
case 8:
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
/* If we can't do 5551, reject */
caps &= CLCD_CAP_5551;
if (!caps) {
ret = -EINVAL;
break;
}
[PATCH] ARM: Fix AMBA CLCD fb driver for 1bpp/STN mono panels Fix the AMBA CLCD framebuffer driver for 1bpp modes and STN monochrome LCD panels. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-28 17:38:19 +08:00
var->red.length = var->bits_per_pixel;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
var->red.offset = 0;
[PATCH] ARM: Fix AMBA CLCD fb driver for 1bpp/STN mono panels Fix the AMBA CLCD framebuffer driver for 1bpp modes and STN monochrome LCD panels. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-28 17:38:19 +08:00
var->green.length = var->bits_per_pixel;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
var->green.offset = 0;
[PATCH] ARM: Fix AMBA CLCD fb driver for 1bpp/STN mono panels Fix the AMBA CLCD framebuffer driver for 1bpp modes and STN monochrome LCD panels. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-28 17:38:19 +08:00
var->blue.length = var->bits_per_pixel;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
var->blue.offset = 0;
break;
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case 16:
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
/* If we can't do 444, 5551 or 565, reject */
if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
ret = -EINVAL;
break;
}
[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp Some folk want to use RGB555 rather tahn RGB565 with amba-clcd. Allow amba-clcd to accept either pixel format. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 22:12:06 +08:00
/*
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
* Green length can be 4, 5 or 6 depending whether
* we're operating in 444, 5551 or 565 mode.
[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp Some folk want to use RGB555 rather tahn RGB565 with amba-clcd. Allow amba-clcd to accept either pixel format. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 22:12:06 +08:00
*/
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
if (var->green.length == 4 && caps & CLCD_CAP_444)
caps &= CLCD_CAP_444;
if (var->green.length == 5 && caps & CLCD_CAP_5551)
caps &= CLCD_CAP_5551;
else if (var->green.length == 6 && caps & CLCD_CAP_565)
caps &= CLCD_CAP_565;
else {
/*
* PL110 officially only supports RGB555,
* but may be wired up to allow RGB565.
*/
if (caps & CLCD_CAP_565) {
var->green.length = 6;
caps &= CLCD_CAP_565;
} else if (caps & CLCD_CAP_5551) {
var->green.length = 5;
caps &= CLCD_CAP_5551;
} else {
var->green.length = 4;
caps &= CLCD_CAP_444;
}
}
if (var->green.length >= 5) {
var->red.length = 5;
var->blue.length = 5;
} else {
var->red.length = 4;
var->blue.length = 4;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
[PATCH] ARM: Fix AMBA CLCD fb driver for 32bpp We were supporting 24bpp. However, the pixel organisation in memory was 0RGB, so it was 24bpp in 32bit words. This means we're actually supporting 32bpp and not 24bpp. Also, add a check to ensure that we don't exceed the available framebuffer when changing display resolutions. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-28 17:43:52 +08:00
case 32:
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
/* If we can't do 888, reject */
caps &= CLCD_CAP_888;
if (!caps) {
ret = -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
}
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
default:
ret = -EINVAL;
break;
}
[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp Some folk want to use RGB555 rather tahn RGB565 with amba-clcd. Allow amba-clcd to accept either pixel format. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 22:12:06 +08:00
/*
* >= 16bpp displays have separate colour component bitfields
* encoded in the pixel data. Calculate their position from
* the bitfield length defined above.
*/
if (ret == 0 && var->bits_per_pixel >= 16) {
ARM: clcd: add method for describing display capabilities The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-21 22:03:28 +08:00
bool bgr, rgb;
bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
if (!bgr && !rgb)
/*
* The requested format was not possible, try just
* our capabilities. One of BGR or RGB must be
* supported.
*/
bgr = caps & CLCD_CAP_BGR;
if (bgr) {
[ARM] amba-clcd: Allow RGB555 and RGB565 with 16bpp Some folk want to use RGB555 rather tahn RGB565 with amba-clcd. Allow amba-clcd to accept either pixel format. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-26 22:12:06 +08:00
var->blue.offset = 0;
var->green.offset = var->blue.offset + var->blue.length;
var->red.offset = var->green.offset + var->green.length;
} else {
var->red.offset = 0;
var->green.offset = var->red.offset + var->red.length;
var->blue.offset = var->green.offset + var->green.length;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return ret;
}
static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
int ret = -EINVAL;
if (fb->board->check)
ret = fb->board->check(fb, var);
[PATCH] ARM: Fix AMBA CLCD fb driver for 32bpp We were supporting 24bpp. However, the pixel organisation in memory was 0RGB, so it was 24bpp in 32bit words. This means we're actually supporting 32bpp and not 24bpp. Also, add a check to ensure that we don't exceed the available framebuffer when changing display resolutions. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-04-28 17:43:52 +08:00
if (ret == 0 &&
var->xres_virtual * var->bits_per_pixel / 8 *
var->yres_virtual > fb->fb.fix.smem_len)
ret = -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (ret == 0)
ret = clcdfb_set_bitfields(fb, var);
return ret;
}
static int clcdfb_set_par(struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
struct clcd_regs regs;
fb->fb.fix.line_length = fb->fb.var.xres_virtual *
fb->fb.var.bits_per_pixel / 8;
if (fb->fb.var.bits_per_pixel <= 8)
fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
else
fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
fb->board->decode(fb, &regs);
clcdfb_disable(fb);
writel(regs.tim0, fb->regs + CLCD_TIM0);
writel(regs.tim1, fb->regs + CLCD_TIM1);
writel(regs.tim2, fb->regs + CLCD_TIM2);
writel(regs.tim3, fb->regs + CLCD_TIM3);
clcdfb_set_start(fb);
clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
fb->clcd_cntl = regs.cntl;
clcdfb_enable(fb, regs.cntl);
#ifdef DEBUG
Remove multiple KERN_ prefixes from printk formats Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-07 04:05:40 +08:00
printk(KERN_INFO
"CLCD: Registers set to\n"
" %08x %08x %08x %08x\n"
" %08x %08x %08x %08x\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
return 0;
}
static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
{
unsigned int mask = (1 << bf->length) - 1;
return (val >> (16 - bf->length) & mask) << bf->offset;
}
/*
* Set a single color register. The values supplied have a 16 bit
* magnitude. Return != 0 for invalid regno.
*/
static int
clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
unsigned int blue, unsigned int transp, struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
if (regno < 16)
fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
convert_bitfield(blue, &fb->fb.var.blue) |
convert_bitfield(green, &fb->fb.var.green) |
convert_bitfield(red, &fb->fb.var.red);
[PATCH] ARM: AMBA CLCD: program palette for pseudocolor visuals Signed-off-by: Russell King <rmk@arm.linux.org.uk>
2005-05-01 05:39:51 +08:00
if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
u32 val, mask, newval;
newval = (red >> 11) & 0x001f;
newval |= (green >> 6) & 0x03e0;
newval |= (blue >> 1) & 0x7c00;
/*
* 3.2.11: if we're configured for big endian
* byte order, the palette entries are swapped.
*/
if (fb->clcd_cntl & CNTL_BEBO)
regno ^= 1;
if (regno & 1) {
newval <<= 16;
mask = 0x0000ffff;
} else {
mask = 0xffff0000;
}
val = readl(fb->regs + hw_reg) & mask;
writel(val | newval, fb->regs + hw_reg);
}
return regno > 255;
}
/*
* Blank the screen if blank_mode != 0, else unblank. If blank == NULL
* then the caller blanks by setting the CLUT (Color Look Up Table) to all
* black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
* to e.g. a video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
* blank_mode == 2: suspend vsync
* blank_mode == 3: suspend hsync
* blank_mode == 4: powerdown
*/
static int clcdfb_blank(int blank_mode, struct fb_info *info)
{
struct clcd_fb *fb = to_clcd(info);
if (blank_mode != 0) {
clcdfb_disable(fb);
} else {
clcdfb_enable(fb, fb->clcd_cntl);
}
return 0;
}
[PATCH] fbdev: Sanitize ->fb_mmap prototype No need for a file argument. If we'd really need it it's in vma->vm_file already. gbefb and sgivwfb used to set vma->vm_file to the file argument, but the kernel alrady did that. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-15 05:21:25 +08:00
static int clcdfb_mmap(struct fb_info *info,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct vm_area_struct *vma)
{
struct clcd_fb *fb = to_clcd(info);
unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
int ret = -EINVAL;
len = info->fix.smem_len;
if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
fb->board->mmap)
ret = fb->board->mmap(fb, vma);
return ret;
}
static struct fb_ops clcdfb_ops = {
.owner = THIS_MODULE,
.fb_check_var = clcdfb_check_var,
.fb_set_par = clcdfb_set_par,
.fb_setcolreg = clcdfb_setcolreg,
.fb_blank = clcdfb_blank,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_mmap = clcdfb_mmap,
};
static int clcdfb_register(struct clcd_fb *fb)
{
int ret;
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
/*
* ARM PL111 always has IENB at 0x1c; it's only PL110
* which is reversed on some platforms.
*/
if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
fb->off_ienb = CLCD_PL111_IENB;
fb->off_cntl = CLCD_PL111_CNTL;
} else {
video: ARM CLCD: runtime check for Versatile The current compile-time check for inversed IENB/CNTL does not work in multiplatform boots: as soon as versatile is included in the build, the IENB/CNTL is switched and breaks graphics. Convert this to a runtime switch. Cc: stable@vger.kernel.org Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Fixes: a29da136de34 ("ARM: versatile: convert to multi-platform") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-02-23 18:01:38 +08:00
if (of_machine_is_compatible("arm,versatile-ab") ||
of_machine_is_compatible("arm,versatile-pb")) {
fb->off_ienb = CLCD_PL111_IENB;
fb->off_cntl = CLCD_PL111_CNTL;
} else {
fb->off_ienb = CLCD_PL110_IENB;
fb->off_cntl = CLCD_PL110_CNTL;
}
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
}
[ARM] amba drivers: don't pass a consumer clock name for devices with unique clocks Where devices only have one consumer, passing a consumer clock ID has no real benefit, and it only encourages wrong implementations of the clk API. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-12-01 01:38:14 +08:00
fb->clk = clk_get(&fb->dev->dev, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (IS_ERR(fb->clk)) {
ret = PTR_ERR(fb->clk);
goto out;
}
clk: amba-clcd: convert to clk_prepare()/clk_unprepare() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22 19:34:31 +08:00
ret = clk_prepare(fb->clk);
if (ret)
goto free_clk;
fbdev: amba: Link fb device to its parent Some pieces of userspace like debian-installer expect to find the fb0 driver name by readlink-ing /sys/class/graphics/fb0/device/driver but this was broken with amba-clcd as it sets up fb_info manually and missed the .device parent pointer. Signed-off-by: Loïc Minier <loic.minier@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-21 04:44:17 +08:00
fb->fb.device = &fb->dev->dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fb->fb.fix.mmio_start = fb->dev->res.start;
[ARM] 5544/1: Trust PrimeCell resource sizes I found the PrimeCell/AMBA Bus drivers distrusting the resource passed in as part of the struct amba_device abstraction. This patch removes all hard coded resource sizes found in the PrimeCell drivers and move the responsibility of this definition back to the platform/board device definition, which already exist and appear to be correct for all in-tree users of these drivers. We do this using the resource_size() inline function which was also replicated in the only driver using the resource size, so that has been changed too. The KMI_SIZE was left in kmi.h in case someone likes it. Test-compiled against Versatile and Integrator defconfigs, seems to work but I don't posess these boards and cannot test them. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-08 06:27:31 +08:00
fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
if (!fb->regs) {
printk(KERN_ERR "CLCD: unable to remap registers\n");
ret = -ENOMEM;
clk: amba-clcd: convert to clk_prepare()/clk_unprepare() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22 19:34:31 +08:00
goto clk_unprep;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
fb->fb.fbops = &clcdfb_ops;
fb->fb.flags = FBINFO_FLAG_DEFAULT;
fb->fb.pseudo_palette = fb->cmap;
strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
fb->fb.fix.type_aux = 0;
fb->fb.fix.xpanstep = 0;
fb->fb.fix.ypanstep = 0;
fb->fb.fix.ywrapstep = 0;
fb->fb.fix.accel = FB_ACCEL_NONE;
fb->fb.var.xres = fb->panel->mode.xres;
fb->fb.var.yres = fb->panel->mode.yres;
fb->fb.var.xres_virtual = fb->panel->mode.xres;
fb->fb.var.yres_virtual = fb->panel->mode.yres;
fb->fb.var.bits_per_pixel = fb->panel->bpp;
fb->fb.var.grayscale = fb->panel->grayscale;
fb->fb.var.pixclock = fb->panel->mode.pixclock;
fb->fb.var.left_margin = fb->panel->mode.left_margin;
fb->fb.var.right_margin = fb->panel->mode.right_margin;
fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
fb->fb.var.sync = fb->panel->mode.sync;
fb->fb.var.vmode = fb->panel->mode.vmode;
fb->fb.var.activate = FB_ACTIVATE_NOW;
fb->fb.var.nonstd = 0;
fb->fb.var.height = fb->panel->height;
fb->fb.var.width = fb->panel->width;
fb->fb.var.accel_flags = 0;
fb->fb.monspecs.hfmin = 0;
fb->fb.monspecs.hfmax = 100000;
fb->fb.monspecs.vfmin = 0;
fb->fb.monspecs.vfmax = 400;
fb->fb.monspecs.dclkmin = 1000000;
fb->fb.monspecs.dclkmax = 100000000;
/*
* Make sure that the bitfields are set appropriately.
*/
clcdfb_set_bitfields(fb, &fb->fb.var);
/*
* Allocate colourmap.
*/
amba-clcd: fix cmap memory leaks - fix cmap leak in removal path - fix cmap leak when register_framebuffer fails Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:25:29 +08:00
ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
if (ret)
goto unmap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Ensure interrupts are disabled.
*/
Video: ARM CLCD: Better fix for swapped IENB and CNTL registers On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-12 22:32:01 +08:00
writel(0, fb->regs + fb->off_ienb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
fb_set_var(&fb->fb, &fb->fb.var);
ARM: clcd: clean up CLCD announcement printks Make the CLCD announcement printk say which primecell part number has been found. Display the revision as an unsigned decimal, and display only the first 8 hex digits of the base address unless it's larger. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-20 05:10:24 +08:00
dev_info(&fb->dev->dev, "%s hardware, %s display\n",
fb->board->name, fb->panel->mode.name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ret = register_framebuffer(&fb->fb);
if (ret == 0)
goto out;
printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
amba-clcd: fix cmap memory leaks - fix cmap leak in removal path - fix cmap leak when register_framebuffer fails Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:25:29 +08:00
fb_dealloc_cmap(&fb->fb.cmap);
unmap:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
iounmap(fb->regs);
clk: amba-clcd: convert to clk_prepare()/clk_unprepare() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22 19:34:31 +08:00
clk_unprep:
clk_unprepare(fb->clk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
free_clk:
clk_put(fb->clk);
out:
return ret;
}
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
#ifdef CONFIG_OF
static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
struct fb_videomode *mode)
{
int err;
struct display_timing timing;
struct videomode video;
err = of_get_display_timing(node, "panel-timing", &timing);
if (err)
return err;
videomode_from_timing(&timing, &video);
err = fb_videomode_from_videomode(&video, mode);
if (err)
return err;
return 0;
}
static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
{
return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
mode->refresh);
}
video: ARM CLCD: backlight support for OF If the device is probed from device tree, we can support backlight. This is used with some systems such as the ST Microelectronics Nomadik. We have to add HAS_IOMEM to the dependencies of CLCD since the backlight class device will now be selected, and if it gets selected on an arch that does not have IOMEM, compilation will fail. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-06-16 17:36:13 +08:00
static int clcdfb_of_get_backlight(struct device_node *endpoint,
struct clcd_panel *clcd_panel)
{
struct device_node *panel;
struct device_node *backlight;
panel = of_graph_get_remote_port_parent(endpoint);
if (!panel)
return -ENODEV;
/* Look up the optional backlight phandle */
backlight = of_parse_phandle(panel, "backlight", 0);
if (backlight) {
clcd_panel->backlight = of_find_backlight_by_node(backlight);
of_node_put(backlight);
if (!clcd_panel->backlight)
return -EPROBE_DEFER;
}
return 0;
}
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
static int clcdfb_of_get_mode(struct device *dev, struct device_node *endpoint,
struct fb_videomode *mode)
{
int err;
struct device_node *panel;
char *name;
int len;
panel = of_graph_get_remote_port_parent(endpoint);
if (!panel)
return -ENODEV;
/* Only directly connected DPI panels supported for now */
if (of_device_is_compatible(panel, "panel-dpi"))
err = clcdfb_of_get_dpi_panel_mode(panel, mode);
else
err = -ENOENT;
if (err)
return err;
len = clcdfb_snprintf_mode(NULL, 0, mode);
name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
video: ARM CLCD: Add missing error check for devm_kzalloc This patch add a missing check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-11 17:36:45 +08:00
if (!name)
return -ENOMEM;
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
clcdfb_snprintf_mode(name, len + 1, mode);
mode->name = name;
return 0;
}
static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
{
static struct {
unsigned int part;
u32 r0, g0, b0;
u32 caps;
} panels[] = {
{ 0x110, 1, 7, 13, CLCD_CAP_5551 },
{ 0x110, 0, 8, 16, CLCD_CAP_888 },
{ 0x111, 4, 14, 20, CLCD_CAP_444 },
{ 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
{ 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
CLCD_CAP_565 },
{ 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
CLCD_CAP_565 | CLCD_CAP_888 },
};
int i;
/* Bypass pixel clock divider, data output on the falling edge */
fb->panel->tim2 = TIM2_BCD | TIM2_IPC;
/* TFT display, vert. comp. interrupt at the start of the back porch */
fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
fb->panel->caps = 0;
/* Match the setup with known variants */
for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
if (amba_part(fb->dev) != panels[i].part)
continue;
if (g0 != panels[i].g0)
continue;
if (r0 == panels[i].r0 && b0 == panels[i].b0)
video: ARM CLCD: Fix color model capabilities for DT platforms The DT-based panel capabilities selection was picking up a subset of available modes based on hardware configuration. This was wrong, as the capabilities describe available memory models and adapt the display controller to them that the RGB output is wired up correctly (as in: R and B components are not swapped). This patch fixes it by removing the unnecessary limitation. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-10 22:15:53 +08:00
fb->panel->caps = panels[i].caps;
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
}
return fb->panel->caps ? 0 : -EINVAL;
}
static int clcdfb_of_init_display(struct clcd_fb *fb)
{
struct device_node *endpoint;
int err;
video: ARM CLCD: Fix calculation of bits-per-pixel If the device-tree specifies a max-memory-bandwidth property then the CLCD driver uses that to calculate the bits-per-pixel supported, however, this calculation is faulty for two reasons. 1. It doesn't ensure that the result is a sane value, i.e. a power of 2 and <= 32 as the rest of the code assumes. 2. It uses the displayed resolution and calculates the average bandwidth across the whole frame. It should instead calculate the peak bandwidth based on the pixel clock. This patch fixes both the above. Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-20 20:41:04 +08:00
unsigned int bpp;
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
u32 max_bandwidth;
u32 tft_r0b0g0[3];
fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
if (!fb->panel)
return -ENOMEM;
endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
if (!endpoint)
return -ENODEV;
video: ARM CLCD: backlight support for OF If the device is probed from device tree, we can support backlight. This is used with some systems such as the ST Microelectronics Nomadik. We have to add HAS_IOMEM to the dependencies of CLCD since the backlight class device will now be selected, and if it gets selected on an arch that does not have IOMEM, compilation will fail. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-06-16 17:36:13 +08:00
err = clcdfb_of_get_backlight(endpoint, fb->panel);
if (err)
return err;
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
err = clcdfb_of_get_mode(&fb->dev->dev, endpoint, &fb->panel->mode);
if (err)
return err;
err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
&max_bandwidth);
video: ARM CLCD: Fix calculation of bits-per-pixel If the device-tree specifies a max-memory-bandwidth property then the CLCD driver uses that to calculate the bits-per-pixel supported, however, this calculation is faulty for two reasons. 1. It doesn't ensure that the result is a sane value, i.e. a power of 2 and <= 32 as the rest of the code assumes. 2. It uses the displayed resolution and calculates the average bandwidth across the whole frame. It should instead calculate the peak bandwidth based on the pixel clock. This patch fixes both the above. Signed-off-by: Jon Medhurst <tixy@linaro.org> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-20 20:41:04 +08:00
if (!err) {
/*
* max_bandwidth is in bytes per second and pixclock in
* pico-seconds, so the maximum allowed bits per pixel is
* 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
* Rearrange this calculation to avoid overflow and then ensure
* result is a valid format.
*/
bpp = max_bandwidth / (1000 / 8)
/ PICOS2KHZ(fb->panel->mode.pixclock);
bpp = rounddown_pow_of_two(bpp);
if (bpp > 32)
bpp = 32;
} else
bpp = 32;
fb->panel->bpp = bpp;
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
#ifdef CONFIG_CPU_BIG_ENDIAN
fb->panel->cntl |= CNTL_BEBO;
#endif
fb->panel->width = -1;
fb->panel->height = -1;
if (of_property_read_u32_array(endpoint,
"arm,pl11x,tft-r0g0b0-pads",
tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) == 0)
return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
tft_r0b0g0[1], tft_r0b0g0[2]);
return -ENOENT;
}
static int clcdfb_of_vram_setup(struct clcd_fb *fb)
{
int err;
struct device_node *memory;
u64 size;
err = clcdfb_of_init_display(fb);
if (err)
return err;
memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
if (!memory)
return -ENODEV;
fb->fb.screen_base = of_iomap(memory, 0);
if (!fb->fb.screen_base)
return -ENOMEM;
fb->fb.fix.smem_start = of_translate_address(memory,
of_get_address(memory, 0, &size, NULL));
fb->fb.fix.smem_len = size;
return 0;
}
static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
unsigned long off, user_size, kernel_size;
off = vma->vm_pgoff << PAGE_SHIFT;
user_size = vma->vm_end - vma->vm_start;
kernel_size = fb->fb.fix.smem_len;
if (off >= kernel_size || user_size > (kernel_size - off))
return -ENXIO;
return remap_pfn_range(vma, vma->vm_start,
__phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
user_size,
pgprot_writecombine(vma->vm_page_prot));
}
static void clcdfb_of_vram_remove(struct clcd_fb *fb)
{
iounmap(fb->fb.screen_base);
}
static int clcdfb_of_dma_setup(struct clcd_fb *fb)
{
unsigned long framesize;
dma_addr_t dma;
int err;
err = clcdfb_of_init_display(fb);
if (err)
return err;
framesize = fb->panel->mode.xres * fb->panel->mode.yres *
fb->panel->bpp / 8;
fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base)
return -ENOMEM;
fb->fb.fix.smem_start = dma;
fb->fb.fix.smem_len = framesize;
return 0;
}
static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
{
dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc() Rename dma_*_writecombine() to dma_*_wc(), so that the naming is coherent across the various write-combining APIs. Keep the old names for compatibility for a while, these can be removed at a later time. A guard is left to enable backporting of the rename, and later remove of the old mapping defines seemlessly. Build tested successfully with allmodconfig. The following Coccinelle SmPL patch was used for this simple transformation: @ rename_dma_alloc_writecombine @ expression dev, size, dma_addr, gfp; @@ -dma_alloc_writecombine(dev, size, dma_addr, gfp) +dma_alloc_wc(dev, size, dma_addr, gfp) @ rename_dma_free_writecombine @ expression dev, size, cpu_addr, dma_addr; @@ -dma_free_writecombine(dev, size, cpu_addr, dma_addr) +dma_free_wc(dev, size, cpu_addr, dma_addr) @ rename_dma_mmap_writecombine @ expression dev, vma, cpu_addr, dma_addr, size; @@ -dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size) +dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size) We also keep the old names as compatibility helpers, and guard against their definition to make backporting easier. Generated-by: Coccinelle SmPL Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: airlied@linux.ie Cc: akpm@linux-foundation.org Cc: benh@kernel.crashing.org Cc: bhelgaas@google.com Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: daniel.vetter@ffwll.ch Cc: dhowells@redhat.com Cc: julia.lawall@lip6.fr Cc: konrad.wilk@oracle.com Cc: linux-fbdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: luto@amacapital.net Cc: mst@redhat.com Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Cc: vinod.koul@intel.com Cc: xen-devel@lists.xensource.com Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-23 10:34:22 +08:00
return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
fb->fb.fix.smem_start, fb->fb.fix.smem_len);
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
}
static void clcdfb_of_dma_remove(struct clcd_fb *fb)
{
dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
fb->fb.screen_base, fb->fb.fix.smem_start);
}
static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
{
struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
GFP_KERNEL);
struct device_node *node = dev->dev.of_node;
if (!board)
return NULL;
board->name = of_node_full_name(node);
board->caps = CLCD_CAP_ALL;
board->check = clcdfb_check;
board->decode = clcdfb_decode;
if (of_find_property(node, "memory-region", NULL)) {
board->setup = clcdfb_of_vram_setup;
board->mmap = clcdfb_of_vram_mmap;
board->remove = clcdfb_of_vram_remove;
} else {
board->setup = clcdfb_of_dma_setup;
board->mmap = clcdfb_of_dma_mmap;
board->remove = clcdfb_of_dma_remove;
}
return board;
}
#else
video: ARM CLCD: Fix DT-related build problems This patch fixes the following error when !CONFIG_OF: drivers/video/fbdev/amba-clcd.c:800:54: warning: ‘struct amba_dev’ declared inside parameter list [enabled by default] static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev) ^ and adds a missing Kconfig select causing this when CONFIG_OF && !CONFIG_FB_MODE_HELPERS: drivers/video/fbdev/amba-clcd.c:567: undefined reference to `fb_videomode_from_videomode' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-01 22:43:34 +08:00
static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
{
return NULL;
}
#endif
ARM: amba: make probe() functions take const id tables Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-19 23:55:00 +08:00
static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
video: amba-clcd: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-09-17 13:03:53 +08:00
struct clcd_board *board = dev_get_platdata(&dev->dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct clcd_fb *fb;
int ret;
video: ARM CLCD: Add DT support This patch adds basic DT bindings for the PL11x CLCD cells and make their fbdev driver use them. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 19:55:11 +08:00
if (!board)
board = clcdfb_of_get_board(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!board)
return -EINVAL;
DMA-API: video: clcd: add dma_set_mask_and_coherent() call The DMA API requires drivers to call the appropriate dma_set_mask() functions before doing any DMA mapping. Add this required call to the AMBA PL08x driver. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-06-27 17:29:32 +08:00
ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
if (ret)
goto out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ret = amba_request_regions(dev, NULL);
if (ret) {
printk(KERN_ERR "CLCD: unable to reserve regs region\n");
goto out;
}
some kmalloc/memset ->kzalloc (tree wide) Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 16:49:03 +08:00
fb = kzalloc(sizeof(struct clcd_fb), GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!fb) {
printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
ret = -ENOMEM;
goto free_region;
}
fb->dev = dev;
fb->board = board;
ARM: clcd: clean up CLCD announcement printks Make the CLCD announcement printk say which primecell part number has been found. Display the revision as an unsigned decimal, and display only the first 8 hex digits of the base address unless it's larger. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-20 05:10:24 +08:00
dev_info(&fb->dev->dev, "PL%03x rev%u at 0x%08llx\n",
amba_part(dev), amba_rev(dev),
(unsigned long long)dev->res.start);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ret = fb->board->setup(fb);
if (ret)
goto free_fb;
ret = clcdfb_register(fb);
if (ret == 0) {
amba_set_drvdata(dev, fb);
goto out;
}
fb->board->remove(fb);
free_fb:
kfree(fb);
free_region:
amba_release_regions(dev);
out:
return ret;
}
static int clcdfb_remove(struct amba_device *dev)
{
struct clcd_fb *fb = amba_get_drvdata(dev);
clcdfb_disable(fb);
unregister_framebuffer(&fb->fb);
amba-clcd: fix cmap memory leaks - fix cmap leak in removal path - fix cmap leak when register_framebuffer fails Signed-off-by: Andres Salomon <dilinger@debian.org> Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01 06:25:29 +08:00
if (fb->fb.cmap.len)
fb_dealloc_cmap(&fb->fb.cmap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
iounmap(fb->regs);
clk: amba-clcd: convert to clk_prepare()/clk_unprepare() Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-22 19:34:31 +08:00
clk_unprepare(fb->clk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
clk_put(fb->clk);
fb->board->remove(fb);
kfree(fb);
amba_release_regions(dev);
return 0;
}
static struct amba_id clcdfb_id_table[] = {
{
.id = 0x00041110,
[ARM] AMBA CLCD driver can drive PL110 and PL111 primecells Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 22:40:35 +08:00
.mask = 0x000ffffe,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
},
{ 0, 0 },
};
fbdev: amba: Enable module alias autogeneration for AMBA drivers Signed-off-by: Dave Martin <dave.martin@linaro.org>
2011-10-05 22:15:23 +08:00
MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct amba_driver clcd_driver = {
.drv = {
[ARM] AMBA CLCD driver can drive PL110 and PL111 primecells Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 22:40:35 +08:00
.name = "clcd-pl11x",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
},
.probe = clcdfb_probe,
.remove = clcdfb_remove,
.id_table = clcdfb_id_table,
};
[ARM] More sparse fixes arch/arm/kernel/irq.c:998:26: warning: Using plain integer as NULL pointer arch/arm/kernel/smp.c:145:25: warning: Using plain integer as NULL pointer arch/arm/kernel/smp.c:362:5: warning: symbol 'smp_call_function_on_cpu' was not declared. Should it be static? drivers/video/amba-clcd.c:521:12: warning: symbol 'amba_clcdfb_init' was not declared. Should it be static? Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-08 22:44:15 +08:00
static int __init amba_clcdfb_init(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (fb_get_options("ambafb", NULL))
return -ENODEV;
return amba_driver_register(&clcd_driver);
}
module_init(amba_clcdfb_init);
static void __exit amba_clcdfb_exit(void)
{
amba_driver_unregister(&clcd_driver);
}
module_exit(amba_clcdfb_exit);
MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
MODULE_LICENSE("GPL");