linux/arch/arm/mach-omap2/pdata-quirks.c

575 lines
15 KiB
C
Raw Normal View History

/*
* Legacy platform_data quirks
*
* Copyright (C) 2013 Texas Instruments
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/davinci_emac.h>
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
#include <asm/siginfo.h>
#include <asm/signal.h>
#include "common.h"
#include "common-board-devices.h"
#include "dss-common.h"
#include "control.h"
#include "omap_device.h"
#include "omap-secure.h"
#include "soc.h"
#include "hsmmc.h"
struct pdata_init {
const char *compatible;
void (*fn)(void);
};
static struct of_dev_auxdata omap_auxdata_lookup[];
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
#ifdef CONFIG_MACH_NOKIA_N8X0
static void __init omap2420_n8x0_legacy_init(void)
{
omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
}
#else
#define omap2420_n8x0_legacy_init NULL
#endif
#ifdef CONFIG_ARCH_OMAP3
/*
* Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
* mode for MMC1 in case bootloader did not configure things.
* Note that if the pins are used for MMC1, pbias-regulator
* manages the IO voltage.
*/
static void __init omap3_gpio126_127_129(void)
{
u32 reg;
reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
reg &= ~OMAP343X_PBIASLITEVMODE1;
reg |= OMAP343X_PBIASLITEPWRDNZ1;
omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
if (cpu_is_omap3630()) {
reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
reg |= OMAP36XX_GPIO_IO_PWRDNZ;
omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
}
}
static void __init hsmmc2_internal_input_clk(void)
{
u32 reg;
reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
}
static struct iommu_platform_data omap3_iommu_pdata = {
.reset_name = "mmu",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
static int omap3_sbc_t3730_twl_callback(struct device *dev,
unsigned gpio,
unsigned ngpio)
{
int res;
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
"wlan pwr");
if (res)
return res;
gpio_export(gpio, 0);
return 0;
}
static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
{
int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
if (err) {
pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
hub_name, err);
return;
}
gpio_export(gpio, 0);
udelay(10);
gpio_set_value(gpio, 1);
msleep(1);
}
static void __init omap3_sbc_t3730_twl_init(void)
{
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
}
static void __init omap3_sbc_t3730_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
}
static void __init omap3_sbc_t3530_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
}
static struct ti_st_plat_data wilink_pdata = {
.nshutdown_gpio = 137,
.dev_name = "/dev/ttyO1",
.flow_cntrl = 1,
.baud_rate = 300000,
};
static struct platform_device wl18xx_device = {
.name = "kim",
.id = -1,
.dev = {
.platform_data = &wilink_pdata,
}
};
static struct platform_device btwilink_device = {
.name = "btwilink",
.id = -1,
};
static void __init omap3_igep0020_rev_f_legacy_init(void)
{
platform_device_register(&wl18xx_device);
platform_device_register(&btwilink_device);
}
static void __init omap3_igep0030_rev_g_legacy_init(void)
{
platform_device_register(&wl18xx_device);
platform_device_register(&btwilink_device);
}
static void __init omap3_evm_legacy_init(void)
{
hsmmc2_internal_input_clk();
}
static void am35xx_enable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static void am35xx_disable_emac_int(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
}
static struct emac_platform_data am35xx_emac_pdata = {
.interrupt_enable = am35xx_enable_emac_int,
.interrupt_disable = am35xx_disable_emac_int,
};
static void __init am35xx_emac_reset(void)
{
u32 v;
v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
v &= ~AM35XX_CPGMACSS_SW_RST;
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
}
static struct gpio cm_t3517_wlan_gpios[] __initdata = {
{ 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
{ 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
};
static void __init omap3_sbc_t3517_wifi_init(void)
{
int err = gpio_request_array(cm_t3517_wlan_gpios,
ARRAY_SIZE(cm_t3517_wlan_gpios));
if (err) {
pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
return;
}
gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
msleep(100);
gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
}
static void __init omap3_sbc_t3517_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
am35xx_emac_reset();
hsmmc2_internal_input_clk();
omap3_sbc_t3517_wifi_init();
}
static void __init am3517_evm_legacy_init(void)
{
am35xx_emac_reset();
}
ARM: SoC: device tree changes A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAUz/11WCrR//JCVInAQIIyRAA0DjdNNQ/A4G2i1nZCiTFH6a4oZy4JarN ATVPkW/V8avhh+yVNe5FWA44Xe6CDC5TXwMaIsbK+w3Iclj3fplh/MsBkQ9ZT9Sl LAjJoOjuYucCeDy0WLVioRKZ4PJEDoCu/oZTauIMnmWCOCRxLYpOM3FkAT9oN/Ti lswpTSLiV1/U3ZSI4M3qn+Sx1VJL8c/hAIWbvf5if2diYkWPk3VOSKyxmD9zLWdD Iqtb79J+ETVeOIM4sHnx79cG4ZCdpOfRAl7qx6hkJu0YATXESxWhpXVE2McTJuzM qHKsRRNSfsfSWPeF4angll9o06X/qgdT6C4P2dfH49lGeG7llOttw3OaCx3hWCTe U5bt26qtbwG2ZbzocaqvideP+rbpQrCH2vdO1embPv5Lu6peMoBWjxy6twSVXJBG LIymJ0IbiGYxL7BReGqRXt6ehy0BDWBeTSTdsGqgEl2TnxHuS/kgGfJc4D5riiEk aRPVq10p/k+yo4BZtq2GqXIOG6cqkIQ5lhl5Tg9+MfUlquAONqJP70FgRJDBIw9L 9uJp71bgSsA6eYg2tXoqJtpdjKplDWavgtACzIkFg2qFLyYmKvx+F0AXbeTIsrri /mIchTyG+dgiIjWvj/Xsf7jhrdzRcl3uKsJwFmk927pIsh24HV8T+LKgHrf+sVcO qEsEnKGYA6s= =zl/N -----END PGP SIGNATURE----- Merge tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree changes from Arnd Bergmann: "A large part of the arm-soc patches are nowadays DT changes, adding support for new SoCs, boards and devices without changing kernel source. The plan is still to move the devicetree files out of the kernel tree and reduce the amount of churn going on here, but we keep finding reasons to delay doing that. Changes are really all over the place, with little sticking out particularly. We have contributions from a total of 116 people in this branch. Unfortunately, the size of this branch also causes a significant number of conflicts at the moment, typically when subsystem maintainers merge patches that change the driver at the same time as the dts files. In most cases this could be avoided because the dts changes are supposed to be compatible in both ways, and we are asking everyone to send ARM dts changes through our tree only" * tag 'dt-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (541 commits) dts: stmmac: Document the clocks property in the stmmac base document dts: socfpga: Add DTS entry for adding the stmmac glue layer for stmmac. ARM: STi: stih41x: Add support for the FSM Serial Flash Controller ARM: STi: stih416: Add support for the FSM Serial Flash Controller ARM: tegra: fix Dalmore pinctrl configuration ARM: dts: keystone: use common "ti,keystone" compatible instead of -evm ARM: dts: k2hk-evm: set ubifs partition size for 512M NAND ARM: dts: Build all keystone dt blobs ARM: dts: keystone: Fix control register range for clktsip ARM: dts: keystone: Fix domain register range for clkfftc1 ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot ARM: dts: add bcm590xx pmu support and enable for bcm28155-ap ARM: dts: bcm21664: Add device tree files. ARM: DT: bcm21664: Device tree bindings ARM: efm32: properly namespace i2c location property ARM: efm32: fix unit address part in USART2 device nodes' names ARM: mvebu: Enable NAND controller in Armada 385-DB ARM: mvebu: Add support for NAND controller in Armada 38x SoC ARM: mvebu: Add the Core Divider clock to Armada 38x SoCs ARM: mvebu: Add a 2 GHz fixed-clock on Armada 38x SoCs ...
2014-04-06 06:29:04 +08:00
static struct platform_device omap3_rom_rng_device = {
.name = "omap3-rom-rng",
.id = -1,
.dev = {
.platform_data = rx51_secure_rng_call,
},
};
static void __init nokia_n900_legacy_init(void)
{
hsmmc2_internal_input_clk();
if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
/* set IBE to 1 */
rx51_secure_update_aux_cr(BIT(6), 0);
} else {
pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
pr_warn("Thumb binaries may crash randomly without this workaround\n");
}
pr_info("RX-51: Registring OMAP3 HWRNG device\n");
platform_device_register(&omap3_rom_rng_device);
}
}
static void __init omap3_tao3530_legacy_init(void)
{
hsmmc2_internal_input_clk();
}
/* omap3pandora legacy devices */
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
static struct platform_device pandora_backlight = {
.name = "pandora-backlight",
.id = -1,
};
static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
};
static struct regulator_init_data pandora_vmmc3 = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
.consumer_supplies = pandora_vmmc3_supply,
};
static struct fixed_voltage_config pandora_vwlan = {
.supply_name = "vwlan",
.microvolts = 1800000, /* 1.8V */
.gpio = PANDORA_WIFI_NRESET_GPIO,
.startup_delay = 50000, /* 50ms */
.enable_high = 1,
.init_data = &pandora_vmmc3,
};
static struct platform_device pandora_vwlan_device = {
.name = "reg-fixed-voltage",
.id = 1,
.dev = {
.platform_data = &pandora_vwlan,
},
};
static void pandora_wl1251_init_card(struct mmc_card *card)
{
/*
* We have TI wl1251 attached to MMC3. Pass this information to
* SDIO core because it can't be probed by normal methods.
*/
if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
card->quirks |= MMC_QUIRK_NONSTD_SDIO;
card->cccr.wide_bus = 1;
card->cis.vendor = 0x104c;
card->cis.device = 0x9066;
card->cis.blksize = 512;
card->cis.max_dtr = 24000000;
card->ocr = 0x80;
}
}
static struct omap2_hsmmc_info pandora_mmc3[] = {
{
.mmc = 3,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.init_card = pandora_wl1251_init_card,
},
{} /* Terminator */
};
static void __init pandora_wl1251_init(void)
{
struct wl1251_platform_data pandora_wl1251_pdata;
int ret;
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
pandora_wl1251_pdata.power_gpio = -1;
ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
if (ret < 0)
goto fail;
pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
if (pandora_wl1251_pdata.irq < 0)
goto fail_irq;
pandora_wl1251_pdata.use_eeprom = true;
ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
if (ret < 0)
goto fail_irq;
return;
fail_irq:
gpio_free(PANDORA_WIFI_IRQ_GPIO);
fail:
pr_err("wl1251 board initialisation failed\n");
}
static void __init omap3_pandora_legacy_init(void)
{
platform_device_register(&pandora_backlight);
platform_device_register(&pandora_vwlan_device);
omap_hsmmc_init(pandora_mmc3);
omap_hsmmc_late_init(pandora_mmc3);
pandora_wl1251_init();
}
#endif /* CONFIG_ARCH_OMAP3 */
#ifdef CONFIG_SOC_TI81XX
static int fault_fixed_up;
static int t410_abort_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
if ((fsr == 0x406 || fsr == 0xc06) && !fault_fixed_up) {
pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
addr, fsr);
fault_fixed_up = 1;
return 0;
}
return 1;
}
static void __init t410_abort_init(void)
{
hook_fault_code(16 + 6, t410_abort_handler, SIGBUS, BUS_OBJERR,
"imprecise external abort");
}
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
static struct iommu_platform_data omap4_iommu_pdata = {
.reset_name = "mmu_cache",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static struct wkup_m3_platform_data wkup_m3_data = {
.reset_name = "wkup_m3",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
}
#endif
static struct pcs_pdata pcs_pdata;
void omap_pcs_legacy_init(int irq, void (*rearm)(void))
{
pcs_pdata.irq = irq;
pcs_pdata.rearm = rearm;
}
/*
* GPIOs for TWL are initialized by the I2C bus and need custom
* handing until DSS has device tree bindings.
*/
void omap_auxdata_legacy_init(struct device *dev)
{
if (dev->platform_data)
return;
if (strcmp("twl4030-gpio", dev_name(dev)))
return;
dev->platform_data = &twl_gpio_auxdata;
}
/*
* Few boards still need auxdata populated before we populate
* the dev entries in of_platform_populate().
*/
static struct pdata_init auxdata_quirks[] __initdata = {
#ifdef CONFIG_SOC_OMAP2420
{ "nokia,n800", omap2420_n8x0_legacy_init, },
{ "nokia,n810", omap2420_n8x0_legacy_init, },
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
#endif
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
#endif
{ /* sentinel */ },
};
static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#ifdef CONFIG_MACH_NOKIA_N8X0
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
#endif
#ifdef CONFIG_ARCH_OMAP3
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002030, "48002030.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x480025a0, "480025a0.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap3-padconf", 0x48002a00, "48002a00.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
&omap3_iommu_pdata),
/* Only on am3517 */
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_OMAP5
OF_DEV_AUXDATA("ti,omap5-padconf", 0x4a002840, "4a002840.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap5-padconf", 0x4ae0c840, "4ae0c840.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_DRA7XX
OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
&omap4_iommu_pdata),
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
&omap4_iommu_pdata),
#endif
{ /* sentinel */ },
};
/*
* Few boards still need to initialize some legacy devices with
* platform data until the drivers support device tree.
*/
static struct pdata_init pdata_quirks[] __initdata = {
#ifdef CONFIG_ARCH_OMAP3
{ "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
{ "nokia,omap3-n900", nokia_n900_legacy_init, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
{ "logicpd,dm3730-torpedo-devkit", omap3_gpio126_127_129, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
#endif
#ifdef CONFIG_SOC_TI81XX
{ "hp,t410", t410_abort_init, },
#endif
#ifdef CONFIG_SOC_OMAP5
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
#endif
{ /* sentinel */ },
};
static void pdata_quirks_check(struct pdata_init *quirks)
{
while (quirks->compatible) {
if (of_machine_is_compatible(quirks->compatible)) {
if (quirks->fn)
quirks->fn();
break;
}
quirks++;
}
}
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
{
/*
* We still need this for omap2420 and omap3 PM to work, others are
* using drivers/misc/sram.c already.
*/
if (of_machine_is_compatible("ti,omap2420") ||
of_machine_is_compatible("ti,omap3"))
omap_sdrc_init(NULL, NULL);
pdata_quirks_check(auxdata_quirks);
of_platform_populate(NULL, omap_dt_match_table,
omap_auxdata_lookup, NULL);
pdata_quirks_check(pdata_quirks);
}