openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/kirkwood-synology.dtsi

864 lines
18 KiB
Plaintext
Raw Normal View History

ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 04:02:37 +08:00
/*
* Nodes for Marvell 628x Synology devices
*
* Andrew Lunn <andrew@lunn.ch>
* Ben Peddell <klightspeed@killerwolves.net>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/ {
mbus {
pcie-controller {
status = "okay";
pcie@1,0 {
status = "okay";
};
pcie2: pcie@2,0 {
status = "disabled";
};
};
};
ocp@f1000000 {
ARM: dts: kirkwood: rename pin-controller nodes To prepare pin-controller consolidation, first rename all pinctrl nodes to a more appropriate name regarding ePAPR recommended names. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Andrew Lunn <andrew@lunn.ch> Link: https://lkml.kernel.org/r/1398862602-29595-6-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-04-30 20:56:32 +08:00
pinctrl: pin-controller@10000 {
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 04:02:37 +08:00
pmx_alarmled_12: pmx-alarmled-12 {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_fanctrl_15: pmx-fanctrl-15 {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_fanctrl_16: pmx-fanctrl-16 {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_fanctrl_17: pmx-fanctrl-17 {
marvell,pins = "mpp17";
marvell,function = "gpio";
};
pmx_fanalarm_18: pmx-fanalarm-18 {
marvell,pins = "mpp18";
marvell,function = "gpo";
};
pmx_hddled_20: pmx-hddled-20 {
marvell,pins = "mpp20";
marvell,function = "gpio";
};
pmx_hddled_21: pmx-hddled-21 {
marvell,pins = "mpp21";
marvell,function = "gpio";
};
pmx_hddled_22: pmx-hddled-22 {
marvell,pins = "mpp22";
marvell,function = "gpio";
};
pmx_hddled_23: pmx-hddled-23 {
marvell,pins = "mpp23";
marvell,function = "gpio";
};
pmx_hddled_24: pmx-hddled-24 {
marvell,pins = "mpp24";
marvell,function = "gpio";
};
pmx_hddled_25: pmx-hddled-25 {
marvell,pins = "mpp25";
marvell,function = "gpio";
};
pmx_hddled_26: pmx-hddled-26 {
marvell,pins = "mpp26";
marvell,function = "gpio";
};
pmx_hddled_27: pmx-hddled-27 {
marvell,pins = "mpp27";
marvell,function = "gpio";
};
pmx_hddled_28: pmx-hddled-28 {
marvell,pins = "mpp28";
marvell,function = "gpio";
};
pmx_hdd1_pwr_29: pmx-hdd1-pwr-29 {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_hdd1_pwr_30: pmx-hdd-pwr-30 {
marvell,pins = "mpp30";
marvell,function = "gpio";
};
pmx_hdd2_pwr_31: pmx-hdd2-pwr-31 {
marvell,pins = "mpp31";
marvell,function = "gpio";
};
pmx_fanctrl_32: pmx-fanctrl-32 {
marvell,pins = "mpp32";
marvell,function = "gpio";
};
pmx_fanctrl_33: pmx-fanctrl-33 {
marvell,pins = "mpp33";
marvell,function = "gpo";
};
pmx_fanctrl_34: pmx-fanctrl-34 {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_hdd2_pwr_34: pmx-hdd2-pwr-34 {
marvell,pins = "mpp34";
marvell,function = "gpio";
};
pmx_fanalarm_35: pmx-fanalarm-35 {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
pmx_hddled_36: pmx-hddled-36 {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_hddled_37: pmx-hddled-37 {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_hddled_38: pmx-hddled-38 {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_hddled_39: pmx-hddled-39 {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_hddled_40: pmx-hddled-40 {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_hddled_41: pmx-hddled-41 {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_hddled_42: pmx-hddled-42 {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_hddled_43: pmx-hddled-43 {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_hddled_44: pmx-hddled-44 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_hddled_45: pmx-hddled-45 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_hdd3_pwr_44: pmx-hdd3-pwr-44 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_hdd4_pwr_45: pmx-hdd4-pwr-45 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_fanalarm_44: pmx-fanalarm-44 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_fanalarm_45: pmx-fanalarm-45 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
};
rtc@10300 {
status = "disabled";
};
spi@10600 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
ARM: kirkwood: add "jedec,spi-nor" flash compatible binding Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2015-05-19 19:40:16 +08:00
compatible = "st,m25p80", "jedec,spi-nor";
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 04:02:37 +08:00
reg = <0>;
spi-max-frequency = <20000000>;
mode = <0>;
partition@00000000 {
reg = <0x00000000 0x00080000>;
label = "RedBoot";
};
partition@00080000 {
reg = <0x00080000 0x00200000>;
label = "zImage";
};
partition@00280000 {
reg = <0x00280000 0x00140000>;
label = "rd.gz";
};
partition@003c0000 {
reg = <0x003c0000 0x00010000>;
label = "vendor";
};
partition@003d0000 {
reg = <0x003d0000 0x00020000>;
label = "RedBoot config";
};
partition@003f0000 {
reg = <0x003f0000 0x00010000>;
label = "FIS directory";
};
};
};
i2c@11000 {
status = "okay";
clock-frequency = <400000>;
rs5c372: rs5c372@32 {
status = "disabled";
compatible = "ricoh,rs5c372";
reg = <0x32>;
};
s35390a: s35390a@30 {
status = "disabled";
arm: mvebu: fix vendor prefix typo in kirkwood-synology.dtsi As reported by Andrew, the vendor prefix for Seiko Instruments, Inc. S-35390A I2C RTC chip in kirkwood-synology.dtsi has a typo (ssi instead of sii). This patches fixes it. Note: i2c devices ignore the optional vendor prefix, which explains why it worked with the typo and also why there is no backward compatibility issues with the fix. Reported-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Link: https://lkml.kernel.org/r/0444140a267d982c3e5f5f2b7b5f2dc41d010e2a.1416613429.git.arno@natisbad.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-22 07:45:21 +08:00
compatible = "sii,s35390a";
ARM: Kirkwood: Add support for many Synology NAS devices Add device tree fragments and files to support many of the kirkwood based Synology NAS devices. This is a modification of Andrew Lunn's <andrew@lunn.ch> translation of the board setup file maintained by Ben Peddell <klightspeed@killerwolves.net> The Ricoh RS5C372 RTC was used in all 2009 units and some 2010 units. All other Synology Kirkwood-based DiskStations and RackStations use the Seiko S35390A RTC. Most of the 1-bay and 2-bay units use the GPIOs that are multiplexed with the built-in SATA interface activity/presence pins on mpp 20-23, while the 4-bay units use ge01 and a PCIe SATA controller, and put the software controlled HDD leds on mpp 36-43. Most of the 6281 units with HDD power controls use mpp 29 and 31, while most of the 6282 units with HDD power controls use mpp 30, 34, 44 and 45 and provide a model ID on mpp 28, 29, 46 and 47. Pre-2012 units and most 4-bay units didn't have a separate power control for HDD1. These power controls are presumably to limit startup current from the 12V brick power supply. Instead of using separate dtsi files in a synology directory, this patch uses a single dtsi file containing all of the modules for these boards, with all of the modules not common to all boards disabled. The board dts files then enable the appropriate modules for their boards. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Ben Peddell <klightspeed@killerwolves.net> Tested-by: Ben Peddell <klightspeed@killerwolves.net> (ds211j) Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-02-20 04:02:37 +08:00
reg = <0x30>;
};
};
serial@12000 {
status = "okay";
};
serial@12100 {
status = "okay";
};
poweroff@12100 {
compatible = "synology,power-off";
reg = <0x12100 0x100>;
clocks = <&gate_clk 7>;
};
sata@80000 {
pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
pinctrl-names = "default";
status = "okay";
nr-ports = <2>;
};
};
gpio-fan-150-32-35 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
&pmx_fanalarm_35>;
pinctrl-names = "default";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
&gpio1 1 GPIO_ACTIVE_HIGH
&gpio1 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
2200 1
2500 2
3000 4
3300 3
3700 5
3800 6
4200 7 >;
};
gpio-fan-150-15-18 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
&pmx_fanalarm_18>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
2200 1
2500 2
3000 4
3300 3
3700 5
3800 6
4200 7 >;
};
gpio-fan-100-32-35 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_32 &pmx_fanctrl_33 &pmx_fanctrl_34
&pmx_fanalarm_35>;
pinctrl-names = "default";
gpios = <&gpio1 0 GPIO_ACTIVE_HIGH
&gpio1 1 GPIO_ACTIVE_HIGH
&gpio1 2 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
2500 1
3100 2
3800 3
4600 4
4800 5
4900 6
5000 7 >;
};
gpio-fan-100-15-18 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
&pmx_fanalarm_18>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
2500 1
3100 2
3800 3
4600 4
4800 5
4900 6
5000 7 >;
};
gpio-fan-100-15-35-1 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
&pmx_fanalarm_35>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
2500 1
3100 2
3800 3
4600 4
4800 5
4900 6
5000 7 >;
};
gpio-fan-100-15-35-3 {
status = "disabled";
compatible = "gpio-fan";
pinctrl-0 = <&pmx_fanctrl_15 &pmx_fanctrl_16 &pmx_fanctrl_17
&pmx_fanalarm_35 &pmx_fanalarm_44 &pmx_fanalarm_45>;
pinctrl-names = "default";
gpios = <&gpio0 15 GPIO_ACTIVE_HIGH
&gpio0 16 GPIO_ACTIVE_HIGH
&gpio0 17 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH
&gpio1 12 GPIO_ACTIVE_HIGH
&gpio1 13 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = < 0 0
2500 1
3100 2
3800 3
4600 4
4800 5
4900 6
5000 7 >;
};
gpio-leds-alarm-12 {
status = "disabled";
compatible = "gpio-leds";
pinctrl-0 = <&pmx_alarmled_12>;
pinctrl-names = "default";
hdd1-green {
label = "synology:alarm";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
};
gpio-leds-hdd-20 {
status = "disabled";
compatible = "gpio-leds";
pinctrl-0 = <&pmx_hddled_20 &pmx_hddled_21 &pmx_hddled_22
&pmx_hddled_23 &pmx_hddled_24 &pmx_hddled_25
&pmx_hddled_26 &pmx_hddled_27>;
pinctrl-names = "default";
hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
hdd3-green {
label = "synology:green:hdd3";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
hdd3-amber {
label = "synology:amber:hdd3";
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
};
hdd4-green {
label = "synology:green:hdd4";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
hdd4-amber {
label = "synology:amber:hdd4";
gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
};
};
gpio-leds-hdd-21-1 {
status = "disabled";
compatible = "gpio-leds";
pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>;
pinctrl-names = "default";
hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
};
gpio-leds-hdd-21-2 {
status = "disabled";
compatible = "gpio-leds";
pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>;
pinctrl-names = "default";
hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
};
hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
};
hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
};
gpio-leds-hdd-36 {
status = "disabled";
compatible = "gpio-leds";
pinctrl-0 = <&pmx_hddled_36 &pmx_hddled_37 &pmx_hddled_38
&pmx_hddled_39 &pmx_hddled_40 &pmx_hddled_41
&pmx_hddled_42 &pmx_hddled_43 &pmx_hddled_44
&pmx_hddled_45>;
pinctrl-names = "default";
hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
hdd3-green {
label = "synology:green:hdd3";
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
};
hdd3-amber {
label = "synology:amber:hdd3";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
hdd4-green {
label = "synology:green:hdd4";
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
hdd4-amber {
label = "synology:amber:hdd4";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
hdd5-green {
label = "synology:green:hdd5";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
hdd5-amber {
label = "synology:amber:hdd5";
gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
};
};
gpio-leds-hdd-38 {
status = "disabled";
compatible = "gpio-leds";
pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>;
pinctrl-names = "default";
hdd1-green {
label = "synology:green:hdd1";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
};
hdd1-amber {
label = "synology:amber:hdd1";
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
};
hdd2-green {
label = "synology:green:hdd2";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
};
hdd2-amber {
label = "synology:amber:hdd2";
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
regulators-hdd-29 {
status = "disabled";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_hdd1_pwr_29 &pmx_hdd2_pwr_31>;
pinctrl-names = "default";
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "hdd1power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "hdd2power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
};
regulators-hdd-30-1 {
status = "disabled";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_hdd1_pwr_30>;
pinctrl-names = "default";
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "hdd1power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
};
regulators-hdd-30-2 {
status = "disabled";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34>;
pinctrl-names = "default";
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "hdd1power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "hdd2power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
};
regulators-hdd-30-4 {
status = "disabled";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_hdd1_pwr_30 &pmx_hdd2_pwr_34
&pmx_hdd3_pwr_44 &pmx_hdd4_pwr_45>;
pinctrl-names = "default";
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "hdd1power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>;
};
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "hdd2power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "hdd3power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "hdd4power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
};
regulators-hdd-31 {
status = "disabled";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_hdd2_pwr_31>;
pinctrl-names = "default";
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "hdd2power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio0 31 GPIO_ACTIVE_HIGH>;
};
};
regulators-hdd-34 {
status = "disabled";
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_hdd2_pwr_34 &pmx_hdd3_pwr_44
&pmx_hdd4_pwr_45>;
pinctrl-names = "default";
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "hdd2power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
};
regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "hdd3power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "hdd4power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
startup-delay-us = <5000000>;
gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
};
};
};
&mdio {
status = "okay";
ethphy0: ethernet-phy@0 {
device_type = "ethernet-phy";
reg = <8>;
};
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
reg = <9>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
phy-handle = <&ethphy0>;
};
};
&eth1 {
status = "disabled";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};