linux/drivers/scsi/lpfc/lpfc_init.c

1830 lines
52 KiB
C
Raw Normal View History

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2005 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_version.h"
static int lpfc_parse_vpd(struct lpfc_hba *, uint8_t *);
static void lpfc_get_hba_model_desc(struct lpfc_hba *, uint8_t *, uint8_t *);
static int lpfc_post_rcv_buf(struct lpfc_hba *);
static struct scsi_transport_template *lpfc_transport_template = NULL;
static DEFINE_IDR(lpfc_hba_index);
/************************************************************************/
/* */
/* lpfc_config_port_prep */
/* This routine will do LPFC initialization prior to the */
/* CONFIG_PORT mailbox command. This will be initialized */
/* as a SLI layer callback routine. */
/* This routine returns 0 on success or -ERESTART if it wants */
/* the SLI layer to reset the HBA and try again. Any */
/* other return value indicates an error. */
/* */
/************************************************************************/
int
lpfc_config_port_prep(struct lpfc_hba * phba)
{
lpfc_vpd_t *vp = &phba->vpd;
int i = 0, rc;
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
char *lpfc_vpd_data = NULL;
uint16_t offset = 0;
static char licensed[56] =
"key unlock for use with gnu public licensed code only\0";
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
phba->hba_state = LPFC_HBA_ERROR;
return -ENOMEM;
}
mb = &pmb->mb;
phba->hba_state = LPFC_INIT_MBX_CMDS;
if (lpfc_is_LC_HBA(phba->pcidev->device)) {
uint32_t *ptext = (uint32_t *) licensed;
for (i = 0; i < 56; i += sizeof (uint32_t), ptext++)
*ptext = cpu_to_be32(*ptext);
lpfc_read_nv(phba, pmb);
memset((char*)mb->un.varRDnvp.rsvd3, 0,
sizeof (mb->un.varRDnvp.rsvd3));
memcpy((char*)mb->un.varRDnvp.rsvd3, licensed,
sizeof (licensed));
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_MBOX,
"%d:0324 Config Port initialization "
"error, mbxCmd x%x READ_NVPARM, "
"mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
mempool_free(pmb, phba->mbox_mem_pool);
return -ERESTART;
}
memcpy(phba->wwnn, (char *)mb->un.varRDnvp.nodename,
sizeof (mb->un.varRDnvp.nodename));
}
/* Setup and issue mailbox READ REV command */
lpfc_read_rev(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_INIT,
"%d:0439 Adapter failed to init, mbxCmd x%x "
"READ_REV, mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
mempool_free( pmb, phba->mbox_mem_pool);
return -ERESTART;
}
/*
* The value of rr must be 1 since the driver set the cv field to 1.
* This setting requires the FW to set all revision fields.
*/
if (mb->un.varRdRev.rr == 0) {
vp->rev.rBit = 0;
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0440 Adapter failed to init, READ_REV has "
"missing revision information.\n",
phba->brd_no);
mempool_free(pmb, phba->mbox_mem_pool);
return -ERESTART;
}
/* Save information as VPD data */
vp->rev.rBit = 1;
vp->rev.sli1FwRev = mb->un.varRdRev.sli1FwRev;
memcpy(vp->rev.sli1FwName, (char*) mb->un.varRdRev.sli1FwName, 16);
vp->rev.sli2FwRev = mb->un.varRdRev.sli2FwRev;
memcpy(vp->rev.sli2FwName, (char *) mb->un.varRdRev.sli2FwName, 16);
vp->rev.biuRev = mb->un.varRdRev.biuRev;
vp->rev.smRev = mb->un.varRdRev.smRev;
vp->rev.smFwRev = mb->un.varRdRev.un.smFwRev;
vp->rev.endecRev = mb->un.varRdRev.endecRev;
vp->rev.fcphHigh = mb->un.varRdRev.fcphHigh;
vp->rev.fcphLow = mb->un.varRdRev.fcphLow;
vp->rev.feaLevelHigh = mb->un.varRdRev.feaLevelHigh;
vp->rev.feaLevelLow = mb->un.varRdRev.feaLevelLow;
vp->rev.postKernRev = mb->un.varRdRev.postKernRev;
vp->rev.opFwRev = mb->un.varRdRev.opFwRev;
if (lpfc_is_LC_HBA(phba->pcidev->device))
memcpy(phba->RandomData, (char *)&mb->un.varWords[24],
sizeof (phba->RandomData));
/* Get the default values for Model Name and Description */
lpfc_get_hba_model_desc(phba, phba->ModelName, phba->ModelDesc);
/* Get adapter VPD information */
pmb->context2 = kmalloc(DMP_RSP_SIZE, GFP_KERNEL);
if (!pmb->context2)
goto out_free_mbox;
lpfc_vpd_data = kmalloc(DMP_VPD_SIZE, GFP_KERNEL);
if (!lpfc_vpd_data)
goto out_free_context2;
do {
lpfc_dump_mem(phba, pmb, offset);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"%d:0441 VPD not present on adapter, "
"mbxCmd x%x DUMP VPD, mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
kfree(lpfc_vpd_data);
lpfc_vpd_data = NULL;
break;
}
lpfc_sli_pcimem_bcopy(pmb->context2, lpfc_vpd_data + offset,
mb->un.varDmp.word_cnt);
offset += mb->un.varDmp.word_cnt;
} while (mb->un.varDmp.word_cnt);
lpfc_parse_vpd(phba, lpfc_vpd_data);
kfree(lpfc_vpd_data);
out_free_context2:
kfree(pmb->context2);
out_free_mbox:
mempool_free(pmb, phba->mbox_mem_pool);
return 0;
}
/************************************************************************/
/* */
/* lpfc_config_port_post */
/* This routine will do LPFC initialization after the */
/* CONFIG_PORT mailbox command. This will be initialized */
/* as a SLI layer callback routine. */
/* This routine returns 0 on success. Any other return value */
/* indicates an error. */
/* */
/************************************************************************/
int
lpfc_config_port_post(struct lpfc_hba * phba)
{
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
struct lpfc_sli *psli = &phba->sli;
uint32_t status, timeout;
int i, j, rc;
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
phba->hba_state = LPFC_HBA_ERROR;
return -ENOMEM;
}
mb = &pmb->mb;
lpfc_config_link(phba, pmb);
rc = lpfc_sli_issue_mbox(phba, pmb, MBX_POLL);
if (rc != MBX_SUCCESS) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_INIT,
"%d:0447 Adapter failed init, mbxCmd x%x "
"CONFIG_LINK mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
phba->hba_state = LPFC_HBA_ERROR;
mempool_free( pmb, phba->mbox_mem_pool);
return -EIO;
}
/* Get login parameters for NID. */
lpfc_read_sparam(phba, pmb);
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_INIT,
"%d:0448 Adapter failed init, mbxCmd x%x "
"READ_SPARM mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
phba->hba_state = LPFC_HBA_ERROR;
mp = (struct lpfc_dmabuf *) pmb->context1;
mempool_free( pmb, phba->mbox_mem_pool);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
return -EIO;
}
mp = (struct lpfc_dmabuf *) pmb->context1;
memcpy(&phba->fc_sparam, mp->virt, sizeof (struct serv_parm));
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
pmb->context1 = NULL;
memcpy(&phba->fc_nodename, &phba->fc_sparam.nodeName,
sizeof (struct lpfc_name));
memcpy(&phba->fc_portname, &phba->fc_sparam.portName,
sizeof (struct lpfc_name));
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
if (phba->SerialNumber[0] == 0) {
uint8_t *outptr;
outptr = &phba->fc_nodename.u.s.IEEE[0];
for (i = 0; i < 12; i++) {
status = *outptr++;
j = ((status & 0xf0) >> 4);
if (j <= 9)
phba->SerialNumber[i] =
(char)((uint8_t) 0x30 + (uint8_t) j);
else
phba->SerialNumber[i] =
(char)((uint8_t) 0x61 + (uint8_t) (j - 10));
i++;
j = (status & 0xf);
if (j <= 9)
phba->SerialNumber[i] =
(char)((uint8_t) 0x30 + (uint8_t) j);
else
phba->SerialNumber[i] =
(char)((uint8_t) 0x61 + (uint8_t) (j - 10));
}
}
/* This should turn on DELAYED ABTS for ELS timeouts */
lpfc_set_slim(phba, pmb, 0x052198, 0x1);
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
phba->hba_state = LPFC_HBA_ERROR;
mempool_free( pmb, phba->mbox_mem_pool);
return -EIO;
}
lpfc_read_config(phba, pmb);
if (lpfc_sli_issue_mbox(phba, pmb, MBX_POLL) != MBX_SUCCESS) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_INIT,
"%d:0453 Adapter failed to init, mbxCmd x%x "
"READ_CONFIG, mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
phba->hba_state = LPFC_HBA_ERROR;
mempool_free( pmb, phba->mbox_mem_pool);
return -EIO;
}
/* Reset the DFT_HBA_Q_DEPTH to the max xri */
if (phba->cfg_hba_queue_depth > (mb->un.varRdConfig.max_xri+1))
phba->cfg_hba_queue_depth =
mb->un.varRdConfig.max_xri + 1;
phba->lmt = mb->un.varRdConfig.lmt;
/* HBA is not 4GB capable, or HBA is not 2GB capable,
don't let link speed ask for it */
if ((((phba->lmt & LMT_4250_10bit) != LMT_4250_10bit) &&
(phba->cfg_link_speed > LINK_SPEED_2G)) ||
(((phba->lmt & LMT_2125_10bit) != LMT_2125_10bit) &&
(phba->cfg_link_speed > LINK_SPEED_1G))) {
/* Reset link speed to auto. 1G/2GB HBA cfg'd for 4G */
lpfc_printf_log(phba,
KERN_WARNING,
LOG_LINK_EVENT,
"%d:1302 Invalid speed for this board: "
"Reset link speed to auto: x%x\n",
phba->brd_no,
phba->cfg_link_speed);
phba->cfg_link_speed = LINK_SPEED_AUTO;
}
phba->hba_state = LPFC_LINK_DOWN;
/* Only process IOCBs on ring 0 till hba_state is READY */
if (psli->ring[psli->ip_ring].cmdringaddr)
psli->ring[psli->ip_ring].flag |= LPFC_STOP_IOCB_EVENT;
if (psli->ring[psli->fcp_ring].cmdringaddr)
psli->ring[psli->fcp_ring].flag |= LPFC_STOP_IOCB_EVENT;
if (psli->ring[psli->next_ring].cmdringaddr)
psli->ring[psli->next_ring].flag |= LPFC_STOP_IOCB_EVENT;
/* Post receive buffers for desired rings */
lpfc_post_rcv_buf(phba);
/* Enable appropriate host interrupts */
spin_lock_irq(phba->host->host_lock);
status = readl(phba->HCregaddr);
status |= HC_MBINT_ENA | HC_ERINT_ENA | HC_LAINT_ENA;
if (psli->num_rings > 0)
status |= HC_R0INT_ENA;
if (psli->num_rings > 1)
status |= HC_R1INT_ENA;
if (psli->num_rings > 2)
status |= HC_R2INT_ENA;
if (psli->num_rings > 3)
status |= HC_R3INT_ENA;
[SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-30 05:32:13 +08:00
if ((phba->cfg_poll & ENABLE_FCP_RING_POLLING) &&
(phba->cfg_poll & DISABLE_FCP_RING_INT))
status &= ~(HC_R0INT_ENA << LPFC_FCP_RING);
writel(status, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
spin_unlock_irq(phba->host->host_lock);
/*
* Setup the ring 0 (els) timeout handler
*/
timeout = phba->fc_ratov << 1;
phba->els_tmofunc.expires = jiffies + HZ * timeout;
add_timer(&phba->els_tmofunc);
lpfc_init_link(phba, pmb, phba->cfg_topology, phba->cfg_link_speed);
pmb->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
if (lpfc_sli_issue_mbox(phba, pmb, MBX_NOWAIT) != MBX_SUCCESS) {
lpfc_printf_log(phba,
KERN_ERR,
LOG_INIT,
"%d:0454 Adapter failed to init, mbxCmd x%x "
"INIT_LINK, mbxStatus x%x\n",
phba->brd_no,
mb->mbxCommand, mb->mbxStatus);
/* Clear all interrupt enable conditions */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Clear all pending interrupts */
writel(0xffffffff, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
phba->hba_state = LPFC_HBA_ERROR;
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
/* MBOX buffer will be freed in mbox compl */
i = 0;
while ((phba->hba_state != LPFC_HBA_READY) ||
(phba->num_disc_nodes) || (phba->fc_prli_sent) ||
((phba->fc_map_cnt == 0) && (i<2)) ||
(psli->sli_flag & LPFC_SLI_MBOX_ACTIVE)) {
/* Check every second for 30 retries. */
i++;
if (i > 30) {
break;
}
if ((i >= 15) && (phba->hba_state <= LPFC_LINK_DOWN)) {
/* The link is down. Set linkdown timeout */
break;
}
/* Delay for 1 second to give discovery time to complete. */
msleep(1000);
}
/* Since num_disc_nodes keys off of PLOGI, delay a bit to let
* any potential PRLIs to flush thru the SLI sub-system.
*/
msleep(50);
return (0);
}
/************************************************************************/
/* */
/* lpfc_hba_down_prep */
/* This routine will do LPFC uninitialization before the */
/* HBA is reset when bringing down the SLI Layer. This will be */
/* initialized as a SLI layer callback routine. */
/* This routine returns 0 on success. Any other return value */
/* indicates an error. */
/* */
/************************************************************************/
int
lpfc_hba_down_prep(struct lpfc_hba * phba)
{
/* Disable interrupts */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Cleanup potential discovery resources */
lpfc_els_flush_rscn(phba);
lpfc_els_flush_cmd(phba);
lpfc_disc_flush_list(phba);
return (0);
}
/************************************************************************/
/* */
/* lpfc_handle_eratt */
/* This routine will handle processing a Host Attention */
/* Error Status event. This will be initialized */
/* as a SLI layer callback routine. */
/* */
/************************************************************************/
void
lpfc_handle_eratt(struct lpfc_hba * phba)
{
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
/*
* If a reset is sent to the HBA restore PCI configuration registers.
*/
if ( phba->hba_state == LPFC_INIT_START ) {
mdelay(1);
readl(phba->HCregaddr); /* flush */
writel(0, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Restore PCI cmd register */
pci_write_config_word(phba->pcidev,
PCI_COMMAND, phba->pci_cfg_value);
}
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
"%d:1301 Re-establishing Link "
"Data: x%x x%x x%x\n",
phba->brd_no, phba->work_hs,
phba->work_status[0], phba->work_status[1]);
spin_lock_irq(phba->host->host_lock);
phba->fc_flag |= FC_ESTABLISH_LINK;
spin_unlock_irq(phba->host->host_lock);
/*
* Firmware stops when it triggled erratt with HS_FFER6.
* That could cause the I/Os dropped by the firmware.
* Error iocb (I/O) on txcmplq and let the SCSI layer
* retry it after re-establishing link.
*/
pring = &psli->ring[psli->fcp_ring];
lpfc_sli_abort_iocb_ring(phba, pring);
/*
* There was a firmware error. Take the hba offline and then
* attempt to restart it.
*/
lpfc_offline(phba);
if (lpfc_online(phba) == 0) { /* Initialize the HBA */
mod_timer(&phba->fc_estabtmo, jiffies + HZ * 60);
return;
}
} else {
/* The if clause above forces this code path when the status
* failure is a value other than FFER6. Do not call the offline
* twice. This is the adapter hardware error path.
*/
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0457 Adapter Hardware Error "
"Data: x%x x%x x%x\n",
phba->brd_no, phba->work_hs,
phba->work_status[0], phba->work_status[1]);
lpfc_offline(phba);
}
}
/************************************************************************/
/* */
/* lpfc_handle_latt */
/* This routine will handle processing a Host Attention */
/* Link Status event. This will be initialized */
/* as a SLI layer callback routine. */
/* */
/************************************************************************/
void
lpfc_handle_latt(struct lpfc_hba * phba)
{
struct lpfc_sli *psli = &phba->sli;
LPFC_MBOXQ_t *pmb;
volatile uint32_t control;
struct lpfc_dmabuf *mp;
int rc = -ENOMEM;
pmb = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb)
goto lpfc_handle_latt_err_exit;
mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL);
if (!mp)
goto lpfc_handle_latt_free_pmb;
mp->virt = lpfc_mbuf_alloc(phba, 0, &mp->phys);
if (!mp->virt)
goto lpfc_handle_latt_free_mp;
rc = -EIO;
/* Cleanup any outstanding ELS commands */
lpfc_els_flush_cmd(phba);
psli->slistat.link_event++;
lpfc_read_la(phba, pmb, mp);
pmb->mbox_cmpl = lpfc_mbx_cmpl_read_la;
rc = lpfc_sli_issue_mbox (phba, pmb, (MBX_NOWAIT | MBX_STOP_IOCB));
if (rc == MBX_NOT_FINISHED)
goto lpfc_handle_latt_free_mp;
/* Clear Link Attention in HA REG */
spin_lock_irq(phba->host->host_lock);
writel(HA_LATT, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock_irq(phba->host->host_lock);
return;
lpfc_handle_latt_free_mp:
kfree(mp);
lpfc_handle_latt_free_pmb:
kfree(pmb);
lpfc_handle_latt_err_exit:
/* Enable Link attention interrupts */
spin_lock_irq(phba->host->host_lock);
psli->sli_flag |= LPFC_PROCESS_LA;
control = readl(phba->HCregaddr);
control |= HC_LAINT_ENA;
writel(control, phba->HCregaddr);
readl(phba->HCregaddr); /* flush */
/* Clear Link Attention in HA REG */
writel(HA_LATT, phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
spin_unlock_irq(phba->host->host_lock);
lpfc_linkdown(phba);
phba->hba_state = LPFC_HBA_ERROR;
/* The other case is an error from issue_mbox */
if (rc == -ENOMEM)
lpfc_printf_log(phba,
KERN_WARNING,
LOG_MBOX,
"%d:0300 READ_LA: no buffers\n",
phba->brd_no);
return;
}
/************************************************************************/
/* */
/* lpfc_parse_vpd */
/* This routine will parse the VPD data */
/* */
/************************************************************************/
static int
lpfc_parse_vpd(struct lpfc_hba * phba, uint8_t * vpd)
{
uint8_t lenlo, lenhi;
uint32_t Length;
int i, j;
int finished = 0;
int index = 0;
if (!vpd)
return 0;
/* Vital Product */
lpfc_printf_log(phba,
KERN_INFO,
LOG_INIT,
"%d:0455 Vital Product Data: x%x x%x x%x x%x\n",
phba->brd_no,
(uint32_t) vpd[0], (uint32_t) vpd[1], (uint32_t) vpd[2],
(uint32_t) vpd[3]);
do {
switch (vpd[index]) {
case 0x82:
index += 1;
lenlo = vpd[index];
index += 1;
lenhi = vpd[index];
index += 1;
i = ((((unsigned short)lenhi) << 8) + lenlo);
index += i;
break;
case 0x90:
index += 1;
lenlo = vpd[index];
index += 1;
lenhi = vpd[index];
index += 1;
Length = ((((unsigned short)lenhi) << 8) + lenlo);
while (Length > 0) {
/* Look for Serial Number */
if ((vpd[index] == 'S') && (vpd[index+1] == 'N')) {
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->SerialNumber[j++] = vpd[index++];
if (j == 31)
break;
}
phba->SerialNumber[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '1')) {
phba->vpd_flag |= VPD_MODEL_DESC;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->ModelDesc[j++] = vpd[index++];
if (j == 255)
break;
}
phba->ModelDesc[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '2')) {
phba->vpd_flag |= VPD_MODEL_NAME;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->ModelName[j++] = vpd[index++];
if (j == 79)
break;
}
phba->ModelName[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '3')) {
phba->vpd_flag |= VPD_PROGRAM_TYPE;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->ProgramType[j++] = vpd[index++];
if (j == 255)
break;
}
phba->ProgramType[j] = 0;
continue;
}
else if ((vpd[index] == 'V') && (vpd[index+1] == '4')) {
phba->vpd_flag |= VPD_PORT;
index += 2;
i = vpd[index];
index += 1;
j = 0;
Length -= (3+i);
while(i--) {
phba->Port[j++] = vpd[index++];
if (j == 19)
break;
}
phba->Port[j] = 0;
continue;
}
else {
index += 2;
i = vpd[index];
index += 1;
index += i;
Length -= (3 + i);
}
}
finished = 0;
break;
case 0x78:
finished = 1;
break;
default:
index ++;
break;
}
} while (!finished && (index < 108));
return(1);
}
static void
lpfc_get_hba_model_desc(struct lpfc_hba * phba, uint8_t * mdp, uint8_t * descp)
{
lpfc_vpd_t *vp;
uint16_t dev_id = phba->pcidev->device;
uint16_t dev_subid = phba->pcidev->subsystem_device;
uint8_t hdrtype = phba->pcidev->hdr_type;
char *model_str = "";
vp = &phba->vpd;
switch (dev_id) {
case PCI_DEVICE_ID_FIREFLY:
model_str = "LP6000 1Gb PCI";
break;
case PCI_DEVICE_ID_SUPERFLY:
if (vp->rev.biuRev >= 1 && vp->rev.biuRev <= 3)
model_str = "LP7000 1Gb PCI";
else
model_str = "LP7000E 1Gb PCI";
break;
case PCI_DEVICE_ID_DRAGONFLY:
model_str = "LP8000 1Gb PCI";
break;
case PCI_DEVICE_ID_CENTAUR:
if (FC_JEDEC_ID(vp->rev.biuRev) == CENTAUR_2G_JEDEC_ID)
model_str = "LP9002 2Gb PCI";
else
model_str = "LP9000 1Gb PCI";
break;
case PCI_DEVICE_ID_RFLY:
model_str = "LP952 2Gb PCI";
break;
case PCI_DEVICE_ID_PEGASUS:
model_str = "LP9802 2Gb PCI-X";
break;
case PCI_DEVICE_ID_THOR:
if (hdrtype == 0x80)
model_str = "LP10000DC 2Gb 2-port PCI-X";
else
model_str = "LP10000 2Gb PCI-X";
break;
case PCI_DEVICE_ID_VIPER:
model_str = "LPX1000 10Gb PCI-X";
break;
case PCI_DEVICE_ID_PFLY:
model_str = "LP982 2Gb PCI-X";
break;
case PCI_DEVICE_ID_TFLY:
if (hdrtype == 0x80)
model_str = "LP1050DC 2Gb 2-port PCI-X";
else
model_str = "LP1050 2Gb PCI-X";
break;
case PCI_DEVICE_ID_HELIOS:
if (hdrtype == 0x80)
model_str = "LP11002 4Gb 2-port PCI-X2";
else
model_str = "LP11000 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_HELIOS_SCSP:
model_str = "LP11000-SP 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_HELIOS_DCSP:
model_str = "LP11002-SP 4Gb 2-port PCI-X2";
break;
case PCI_DEVICE_ID_NEPTUNE:
if (hdrtype == 0x80)
model_str = "LPe1002 4Gb 2-port";
else
model_str = "LPe1000 4Gb PCIe";
break;
case PCI_DEVICE_ID_NEPTUNE_SCSP:
model_str = "LPe1000-SP 4Gb PCIe";
break;
case PCI_DEVICE_ID_NEPTUNE_DCSP:
model_str = "LPe1002-SP 4Gb 2-port PCIe";
break;
case PCI_DEVICE_ID_BMID:
model_str = "LP1150 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_BSMB:
model_str = "LP111 4Gb PCI-X2";
break;
case PCI_DEVICE_ID_ZEPHYR:
if (hdrtype == 0x80)
model_str = "LPe11002 4Gb 2-port PCIe";
else
model_str = "LPe11000 4Gb PCIe";
break;
case PCI_DEVICE_ID_ZEPHYR_SCSP:
model_str = "LPe11000-SP 4Gb PCIe";
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
model_str = "LPe11002-SP 4Gb 2-port PCIe";
break;
case PCI_DEVICE_ID_ZMID:
model_str = "LPe1150 4Gb PCIe";
break;
case PCI_DEVICE_ID_ZSMB:
model_str = "LPe111 4Gb PCIe";
break;
case PCI_DEVICE_ID_LP101:
model_str = "LP101 2Gb PCI-X";
break;
case PCI_DEVICE_ID_LP10000S:
model_str = "LP10000-S 2Gb PCI";
break;
case PCI_DEVICE_ID_LP11000S:
case PCI_DEVICE_ID_LPE11000S:
switch (dev_subid) {
case PCI_SUBSYSTEM_ID_LP11000S:
model_str = "LP11002-S 4Gb PCI-X2";
break;
case PCI_SUBSYSTEM_ID_LP11002S:
model_str = "LP11000-S 4Gb 2-port PCI-X2";
break;
case PCI_SUBSYSTEM_ID_LPE11000S:
model_str = "LPe11002-S 4Gb PCIe";
break;
case PCI_SUBSYSTEM_ID_LPE11002S:
model_str = "LPe11002-S 4Gb 2-port PCIe";
break;
case PCI_SUBSYSTEM_ID_LPE11010S:
model_str = "LPe11010-S 4Gb 10-port PCIe";
break;
default:
break;
}
break;
default:
break;
}
if (mdp)
sscanf(model_str, "%s", mdp);
if (descp)
sprintf(descp, "Emulex %s Fibre Channel Adapter", model_str);
}
/**************************************************/
/* lpfc_post_buffer */
/* */
/* This routine will post count buffers to the */
/* ring with the QUE_RING_BUF_CN command. This */
/* allows 3 buffers / command to be posted. */
/* Returns the number of buffers NOT posted. */
/**************************************************/
int
lpfc_post_buffer(struct lpfc_hba * phba, struct lpfc_sli_ring * pring, int cnt,
int type)
{
IOCB_t *icmd;
struct lpfc_iocbq *iocb;
struct lpfc_dmabuf *mp1, *mp2;
cnt += pring->missbufcnt;
/* While there are buffers to post */
while (cnt > 0) {
/* Allocate buffer for command iocb */
spin_lock_irq(phba->host->host_lock);
iocb = lpfc_sli_get_iocbq(phba);
spin_unlock_irq(phba->host->host_lock);
if (iocb == NULL) {
pring->missbufcnt = cnt;
return cnt;
}
icmd = &iocb->iocb;
/* 2 buffers can be posted per command */
/* Allocate buffer to post */
mp1 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (mp1)
mp1->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
&mp1->phys);
if (mp1 == 0 || mp1->virt == 0) {
kfree(mp1);
spin_lock_irq(phba->host->host_lock);
lpfc_sli_release_iocbq(phba, iocb);
spin_unlock_irq(phba->host->host_lock);
pring->missbufcnt = cnt;
return cnt;
}
INIT_LIST_HEAD(&mp1->list);
/* Allocate buffer to post */
if (cnt > 1) {
mp2 = kmalloc(sizeof (struct lpfc_dmabuf), GFP_KERNEL);
if (mp2)
mp2->virt = lpfc_mbuf_alloc(phba, MEM_PRI,
&mp2->phys);
if (mp2 == 0 || mp2->virt == 0) {
kfree(mp2);
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
spin_lock_irq(phba->host->host_lock);
lpfc_sli_release_iocbq(phba, iocb);
spin_unlock_irq(phba->host->host_lock);
pring->missbufcnt = cnt;
return cnt;
}
INIT_LIST_HEAD(&mp2->list);
} else {
mp2 = NULL;
}
icmd->un.cont64[0].addrHigh = putPaddrHigh(mp1->phys);
icmd->un.cont64[0].addrLow = putPaddrLow(mp1->phys);
icmd->un.cont64[0].tus.f.bdeSize = FCELSSIZE;
icmd->ulpBdeCount = 1;
cnt--;
if (mp2) {
icmd->un.cont64[1].addrHigh = putPaddrHigh(mp2->phys);
icmd->un.cont64[1].addrLow = putPaddrLow(mp2->phys);
icmd->un.cont64[1].tus.f.bdeSize = FCELSSIZE;
cnt--;
icmd->ulpBdeCount = 2;
}
icmd->ulpCommand = CMD_QUE_RING_BUF64_CN;
icmd->ulpLe = 1;
spin_lock_irq(phba->host->host_lock);
if (lpfc_sli_issue_iocb(phba, pring, iocb, 0) == IOCB_ERROR) {
lpfc_mbuf_free(phba, mp1->virt, mp1->phys);
kfree(mp1);
cnt++;
if (mp2) {
lpfc_mbuf_free(phba, mp2->virt, mp2->phys);
kfree(mp2);
cnt++;
}
lpfc_sli_release_iocbq(phba, iocb);
pring->missbufcnt = cnt;
spin_unlock_irq(phba->host->host_lock);
return cnt;
}
spin_unlock_irq(phba->host->host_lock);
lpfc_sli_ringpostbuf_put(phba, pring, mp1);
if (mp2) {
lpfc_sli_ringpostbuf_put(phba, pring, mp2);
}
}
pring->missbufcnt = 0;
return 0;
}
/************************************************************************/
/* */
/* lpfc_post_rcv_buf */
/* This routine post initial rcv buffers to the configured rings */
/* */
/************************************************************************/
static int
lpfc_post_rcv_buf(struct lpfc_hba * phba)
{
struct lpfc_sli *psli = &phba->sli;
/* Ring 0, ELS / CT buffers */
lpfc_post_buffer(phba, &psli->ring[LPFC_ELS_RING], LPFC_BUF_RING0, 1);
/* Ring 2 - FCP no buffers needed */
return 0;
}
#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
/************************************************************************/
/* */
/* lpfc_sha_init */
/* */
/************************************************************************/
static void
lpfc_sha_init(uint32_t * HashResultPointer)
{
HashResultPointer[0] = 0x67452301;
HashResultPointer[1] = 0xEFCDAB89;
HashResultPointer[2] = 0x98BADCFE;
HashResultPointer[3] = 0x10325476;
HashResultPointer[4] = 0xC3D2E1F0;
}
/************************************************************************/
/* */
/* lpfc_sha_iterate */
/* */
/************************************************************************/
static void
lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
{
int t;
uint32_t TEMP;
uint32_t A, B, C, D, E;
t = 16;
do {
HashWorkingPointer[t] =
S(1,
HashWorkingPointer[t - 3] ^ HashWorkingPointer[t -
8] ^
HashWorkingPointer[t - 14] ^ HashWorkingPointer[t - 16]);
} while (++t <= 79);
t = 0;
A = HashResultPointer[0];
B = HashResultPointer[1];
C = HashResultPointer[2];
D = HashResultPointer[3];
E = HashResultPointer[4];
do {
if (t < 20) {
TEMP = ((B & C) | ((~B) & D)) + 0x5A827999;
} else if (t < 40) {
TEMP = (B ^ C ^ D) + 0x6ED9EBA1;
} else if (t < 60) {
TEMP = ((B & C) | (B & D) | (C & D)) + 0x8F1BBCDC;
} else {
TEMP = (B ^ C ^ D) + 0xCA62C1D6;
}
TEMP += S(5, A) + E + HashWorkingPointer[t];
E = D;
D = C;
C = S(30, B);
B = A;
A = TEMP;
} while (++t <= 79);
HashResultPointer[0] += A;
HashResultPointer[1] += B;
HashResultPointer[2] += C;
HashResultPointer[3] += D;
HashResultPointer[4] += E;
}
/************************************************************************/
/* */
/* lpfc_challenge_key */
/* */
/************************************************************************/
static void
lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
{
*HashWorking = (*RandomChallenge ^ *HashWorking);
}
/************************************************************************/
/* */
/* lpfc_hba_init */
/* */
/************************************************************************/
void
lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
{
int t;
uint32_t *HashWorking;
uint32_t *pwwnn = phba->wwnn;
HashWorking = kmalloc(80 * sizeof(uint32_t), GFP_KERNEL);
if (!HashWorking)
return;
memset(HashWorking, 0, (80 * sizeof(uint32_t)));
HashWorking[0] = HashWorking[78] = *pwwnn++;
HashWorking[1] = HashWorking[79] = *pwwnn;
for (t = 0; t < 7; t++)
lpfc_challenge_key(phba->RandomData + t, HashWorking + t);
lpfc_sha_init(hbainit);
lpfc_sha_iterate(hbainit, HashWorking);
kfree(HashWorking);
}
static void
lpfc_cleanup(struct lpfc_hba * phba, uint32_t save_bind)
{
struct lpfc_nodelist *ndlp, *next_ndlp;
/* clean up phba - lpfc specific */
lpfc_can_disctmo(phba);
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_nlpunmap_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_nlpmap_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_unused_list,
nlp_listp) {
lpfc_nlp_list(phba, ndlp, NLP_NO_LIST);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_plogi_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_adisc_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_reglogin_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_prli_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
list_for_each_entry_safe(ndlp, next_ndlp, &phba->fc_npr_list,
nlp_listp) {
lpfc_nlp_remove(phba, ndlp);
}
INIT_LIST_HEAD(&phba->fc_nlpmap_list);
INIT_LIST_HEAD(&phba->fc_nlpunmap_list);
INIT_LIST_HEAD(&phba->fc_unused_list);
INIT_LIST_HEAD(&phba->fc_plogi_list);
INIT_LIST_HEAD(&phba->fc_adisc_list);
INIT_LIST_HEAD(&phba->fc_reglogin_list);
INIT_LIST_HEAD(&phba->fc_prli_list);
INIT_LIST_HEAD(&phba->fc_npr_list);
phba->fc_map_cnt = 0;
phba->fc_unmap_cnt = 0;
phba->fc_plogi_cnt = 0;
phba->fc_adisc_cnt = 0;
phba->fc_reglogin_cnt = 0;
phba->fc_prli_cnt = 0;
phba->fc_npr_cnt = 0;
phba->fc_unused_cnt= 0;
return;
}
static void
lpfc_establish_link_tmo(unsigned long ptr)
{
struct lpfc_hba *phba = (struct lpfc_hba *)ptr;
unsigned long iflag;
/* Re-establishing Link, timer expired */
lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
"%d:1300 Re-establishing Link, timer expired "
"Data: x%x x%x\n",
phba->brd_no, phba->fc_flag, phba->hba_state);
spin_lock_irqsave(phba->host->host_lock, iflag);
phba->fc_flag &= ~FC_ESTABLISH_LINK;
spin_unlock_irqrestore(phba->host->host_lock, iflag);
}
static int
lpfc_stop_timer(struct lpfc_hba * phba)
{
struct lpfc_sli *psli = &phba->sli;
/* Instead of a timer, this has been converted to a
* deferred procedding list.
*/
while (!list_empty(&phba->freebufList)) {
struct lpfc_dmabuf *mp = NULL;
list_remove_head((&phba->freebufList), mp,
struct lpfc_dmabuf, list);
if (mp) {
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
}
}
[SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-30 05:32:13 +08:00
del_timer_sync(&phba->fcp_poll_timer);
del_timer_sync(&phba->fc_estabtmo);
del_timer_sync(&phba->fc_disctmo);
del_timer_sync(&phba->fc_fdmitmo);
del_timer_sync(&phba->els_tmofunc);
psli = &phba->sli;
del_timer_sync(&psli->mbox_tmo);
return(1);
}
int
lpfc_online(struct lpfc_hba * phba)
{
if (!phba)
return 0;
if (!(phba->fc_flag & FC_OFFLINE_MODE))
return 0;
lpfc_printf_log(phba,
KERN_WARNING,
LOG_INIT,
"%d:0458 Bring Adapter online\n",
phba->brd_no);
if (!lpfc_sli_queue_setup(phba))
return 1;
if (lpfc_sli_hba_setup(phba)) /* Initialize the HBA */
return 1;
spin_lock_irq(phba->host->host_lock);
phba->fc_flag &= ~FC_OFFLINE_MODE;
spin_unlock_irq(phba->host->host_lock);
return 0;
}
int
lpfc_offline(struct lpfc_hba * phba)
{
struct lpfc_sli_ring *pring;
struct lpfc_sli *psli;
unsigned long iflag;
int i = 0;
if (!phba)
return 0;
if (phba->fc_flag & FC_OFFLINE_MODE)
return 0;
psli = &phba->sli;
pring = &psli->ring[psli->fcp_ring];
lpfc_linkdown(phba);
/* The linkdown event takes 30 seconds to timeout. */
while (pring->txcmplq_cnt) {
mdelay(10);
if (i++ > 3000)
break;
}
/* stop all timers associated with this hba */
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
lpfc_printf_log(phba,
KERN_WARNING,
LOG_INIT,
"%d:0460 Bring Adapter offline\n",
phba->brd_no);
/* Bring down the SLI Layer and cleanup. The HBA is offline
now. */
lpfc_sli_hba_down(phba);
lpfc_cleanup(phba, 1);
spin_lock_irqsave(phba->host->host_lock, iflag);
phba->fc_flag |= FC_OFFLINE_MODE;
spin_unlock_irqrestore(phba->host->host_lock, iflag);
return 0;
}
/******************************************************************************
* Function name: lpfc_scsi_free
*
* Description: Called from lpfc_pci_remove_one free internal driver resources
*
******************************************************************************/
static int
lpfc_scsi_free(struct lpfc_hba * phba)
{
struct lpfc_scsi_buf *sb, *sb_next;
struct lpfc_iocbq *io, *io_next;
spin_lock_irq(phba->host->host_lock);
/* Release all the lpfc_scsi_bufs maintained by this host. */
list_for_each_entry_safe(sb, sb_next, &phba->lpfc_scsi_buf_list, list) {
list_del(&sb->list);
pci_pool_free(phba->lpfc_scsi_dma_buf_pool, sb->data,
sb->dma_handle);
kfree(sb);
phba->total_scsi_bufs--;
}
/* Release all the lpfc_iocbq entries maintained by this host. */
list_for_each_entry_safe(io, io_next, &phba->lpfc_iocb_list, list) {
list_del(&io->list);
kfree(io);
phba->total_iocbq_bufs--;
}
spin_unlock_irq(phba->host->host_lock);
return 0;
}
static int __devinit
lpfc_pci_probe_one(struct pci_dev *pdev, const struct pci_device_id *pid)
{
struct Scsi_Host *host;
struct lpfc_hba *phba;
struct lpfc_sli *psli;
struct lpfc_iocbq *iocbq_entry = NULL, *iocbq_next = NULL;
unsigned long bar0map_len, bar2map_len;
int error = -ENODEV, retval;
int i;
uint16_t iotag;
if (pci_enable_device(pdev))
goto out;
if (pci_request_regions(pdev, LPFC_DRIVER_NAME))
goto out_disable_device;
host = scsi_host_alloc(&lpfc_template, sizeof (struct lpfc_hba));
if (!host)
goto out_release_regions;
phba = (struct lpfc_hba*)host->hostdata;
memset(phba, 0, sizeof (struct lpfc_hba));
phba->host = host;
phba->fc_flag |= FC_LOADING;
phba->pcidev = pdev;
/* Assign an unused board number */
if (!idr_pre_get(&lpfc_hba_index, GFP_KERNEL))
goto out_put_host;
error = idr_get_new(&lpfc_hba_index, NULL, &phba->brd_no);
if (error)
goto out_put_host;
host->unique_id = phba->brd_no;
init_MUTEX(&phba->hba_can_block);
INIT_LIST_HEAD(&phba->ctrspbuflist);
INIT_LIST_HEAD(&phba->rnidrspbuflist);
INIT_LIST_HEAD(&phba->freebufList);
/* Initialize timers used by driver */
init_timer(&phba->fc_estabtmo);
phba->fc_estabtmo.function = lpfc_establish_link_tmo;
phba->fc_estabtmo.data = (unsigned long)phba;
init_timer(&phba->fc_disctmo);
phba->fc_disctmo.function = lpfc_disc_timeout;
phba->fc_disctmo.data = (unsigned long)phba;
init_timer(&phba->fc_fdmitmo);
phba->fc_fdmitmo.function = lpfc_fdmi_tmo;
phba->fc_fdmitmo.data = (unsigned long)phba;
init_timer(&phba->els_tmofunc);
phba->els_tmofunc.function = lpfc_els_timeout;
phba->els_tmofunc.data = (unsigned long)phba;
psli = &phba->sli;
init_timer(&psli->mbox_tmo);
psli->mbox_tmo.function = lpfc_mbox_timeout;
psli->mbox_tmo.data = (unsigned long)phba;
[SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-30 05:32:13 +08:00
init_timer(&phba->fcp_poll_timer);
phba->fcp_poll_timer.function = lpfc_poll_timeout;
phba->fcp_poll_timer.data = (unsigned long)phba;
/*
* Get all the module params for configuring this host and then
* establish the host parameters.
*/
lpfc_get_cfgparam(phba);
host->max_id = LPFC_MAX_TARGET;
host->max_lun = phba->cfg_max_luns;
host->this_id = -1;
/* Initialize all internally managed lists. */
INIT_LIST_HEAD(&phba->fc_nlpmap_list);
INIT_LIST_HEAD(&phba->fc_nlpunmap_list);
INIT_LIST_HEAD(&phba->fc_unused_list);
INIT_LIST_HEAD(&phba->fc_plogi_list);
INIT_LIST_HEAD(&phba->fc_adisc_list);
INIT_LIST_HEAD(&phba->fc_reglogin_list);
INIT_LIST_HEAD(&phba->fc_prli_list);
INIT_LIST_HEAD(&phba->fc_npr_list);
pci_set_master(pdev);
retval = pci_set_mwi(pdev);
if (retval)
dev_printk(KERN_WARNING, &pdev->dev,
"Warning: pci_set_mwi returned %d\n", retval);
if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)
goto out_idr_remove;
/*
* Get the bus address of Bar0 and Bar2 and the number of bytes
* required by each mapping.
*/
phba->pci_bar0_map = pci_resource_start(phba->pcidev, 0);
bar0map_len = pci_resource_len(phba->pcidev, 0);
phba->pci_bar2_map = pci_resource_start(phba->pcidev, 2);
bar2map_len = pci_resource_len(phba->pcidev, 2);
/* Map HBA SLIM to a kernel virtual address. */
phba->slim_memmap_p = ioremap(phba->pci_bar0_map, bar0map_len);
if (!phba->slim_memmap_p) {
error = -ENODEV;
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for SLIM memory.\n");
goto out_idr_remove;
}
/* Map HBA Control Registers to a kernel virtual address. */
phba->ctrl_regs_memmap_p = ioremap(phba->pci_bar2_map, bar2map_len);
if (!phba->ctrl_regs_memmap_p) {
error = -ENODEV;
dev_printk(KERN_ERR, &pdev->dev,
"ioremap failed for HBA control registers.\n");
goto out_iounmap_slim;
}
/* Allocate memory for SLI-2 structures */
phba->slim2p = dma_alloc_coherent(&phba->pcidev->dev, SLI2_SLIM_SIZE,
&phba->slim2p_mapping, GFP_KERNEL);
if (!phba->slim2p)
goto out_iounmap;
memset(phba->slim2p, 0, SLI2_SLIM_SIZE);
/* Initialize the SLI Layer to run with lpfc HBAs. */
lpfc_sli_setup(phba);
lpfc_sli_queue_setup(phba);
error = lpfc_mem_alloc(phba);
if (error)
goto out_free_slim;
/* Initialize and populate the iocb list per host. */
INIT_LIST_HEAD(&phba->lpfc_iocb_list);
for (i = 0; i < LPFC_IOCB_LIST_CNT; i++) {
iocbq_entry = kmalloc(sizeof(struct lpfc_iocbq), GFP_KERNEL);
if (iocbq_entry == NULL) {
printk(KERN_ERR "%s: only allocated %d iocbs of "
"expected %d count. Unloading driver.\n",
__FUNCTION__, i, LPFC_IOCB_LIST_CNT);
error = -ENOMEM;
goto out_free_iocbq;
}
memset(iocbq_entry, 0, sizeof(struct lpfc_iocbq));
iotag = lpfc_sli_next_iotag(phba, iocbq_entry);
if (iotag == 0) {
kfree (iocbq_entry);
printk(KERN_ERR "%s: failed to allocate IOTAG. "
"Unloading driver.\n",
__FUNCTION__);
error = -ENOMEM;
goto out_free_iocbq;
}
spin_lock_irq(phba->host->host_lock);
list_add(&iocbq_entry->list, &phba->lpfc_iocb_list);
phba->total_iocbq_bufs++;
spin_unlock_irq(phba->host->host_lock);
}
/* Initialize HBA structure */
phba->fc_edtov = FF_DEF_EDTOV;
phba->fc_ratov = FF_DEF_RATOV;
phba->fc_altov = FF_DEF_ALTOV;
phba->fc_arbtov = FF_DEF_ARBTOV;
INIT_LIST_HEAD(&phba->work_list);
phba->work_ha_mask = (HA_ERATT|HA_MBATT|HA_LATT);
phba->work_ha_mask |= (HA_RXMASK << (LPFC_ELS_RING * 4));
/* Startup the kernel thread for this host adapter. */
phba->worker_thread = kthread_run(lpfc_do_work, phba,
"lpfc_worker_%d", phba->brd_no);
if (IS_ERR(phba->worker_thread)) {
error = PTR_ERR(phba->worker_thread);
goto out_free_iocbq;
}
/* We can rely on a queue depth attribute only after SLI HBA setup */
host->can_queue = phba->cfg_hba_queue_depth - 10;
/* Tell the midlayer we support 16 byte commands */
host->max_cmd_len = 16;
/* Initialize the list of scsi buffers used by driver for scsi IO. */
[SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-30 05:32:13 +08:00
spin_lock_init(&phba->scsi_buf_list_lock);
INIT_LIST_HEAD(&phba->lpfc_scsi_buf_list);
host->transportt = lpfc_transport_template;
host->hostdata[0] = (unsigned long)phba;
pci_set_drvdata(pdev, host);
error = scsi_add_host(host, &pdev->dev);
if (error)
goto out_kthread_stop;
error = lpfc_alloc_sysfs_attr(phba);
if (error)
goto out_kthread_stop;
error = request_irq(phba->pcidev->irq, lpfc_intr_handler, SA_SHIRQ,
LPFC_DRIVER_NAME, phba);
if (error) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0451 Enable interrupt handler failed\n",
phba->brd_no);
goto out_free_sysfs_attr;
}
phba->MBslimaddr = phba->slim_memmap_p;
phba->HAregaddr = phba->ctrl_regs_memmap_p + HA_REG_OFFSET;
phba->CAregaddr = phba->ctrl_regs_memmap_p + CA_REG_OFFSET;
phba->HSregaddr = phba->ctrl_regs_memmap_p + HS_REG_OFFSET;
phba->HCregaddr = phba->ctrl_regs_memmap_p + HC_REG_OFFSET;
error = lpfc_sli_hba_setup(phba);
if (error)
goto out_free_irq;
[SCSI] lpfc 8.1.1 : Add polled-mode support - Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-30 05:32:13 +08:00
if (phba->cfg_poll & DISABLE_FCP_RING_INT) {
spin_lock_irq(phba->host->host_lock);
lpfc_poll_start_timer(phba);
spin_unlock_irq(phba->host->host_lock);
}
/*
* set fixed host attributes
* Must done after lpfc_sli_hba_setup()
*/
fc_host_node_name(host) = wwn_to_u64(phba->fc_nodename.u.wwn);
fc_host_port_name(host) = wwn_to_u64(phba->fc_portname.u.wwn);
fc_host_supported_classes(host) = FC_COS_CLASS3;
memset(fc_host_supported_fc4s(host), 0,
sizeof(fc_host_supported_fc4s(host)));
fc_host_supported_fc4s(host)[2] = 1;
fc_host_supported_fc4s(host)[7] = 1;
lpfc_get_hba_sym_node_name(phba, fc_host_symbolic_name(host));
fc_host_supported_speeds(host) = 0;
switch (FC_JEDEC_ID(phba->vpd.rev.biuRev)) {
case VIPER_JEDEC_ID:
fc_host_supported_speeds(host) |= FC_PORTSPEED_10GBIT;
break;
case HELIOS_JEDEC_ID:
fc_host_supported_speeds(host) |= FC_PORTSPEED_4GBIT;
/* Fall through */
case CENTAUR_2G_JEDEC_ID:
case PEGASUS_JEDEC_ID:
case THOR_JEDEC_ID:
fc_host_supported_speeds(host) |= FC_PORTSPEED_2GBIT;
/* Fall through */
default:
fc_host_supported_speeds(host) = FC_PORTSPEED_1GBIT;
}
fc_host_maxframe_size(host) =
((((uint32_t) phba->fc_sparam.cmn.bbRcvSizeMsb & 0x0F) << 8) |
(uint32_t) phba->fc_sparam.cmn.bbRcvSizeLsb);
/* This value is also unchanging */
memset(fc_host_active_fc4s(host), 0,
sizeof(fc_host_active_fc4s(host)));
fc_host_active_fc4s(host)[2] = 1;
fc_host_active_fc4s(host)[7] = 1;
spin_lock_irq(phba->host->host_lock);
phba->fc_flag &= ~FC_LOADING;
spin_unlock_irq(phba->host->host_lock);
return 0;
out_free_irq:
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
free_irq(phba->pcidev->irq, phba);
out_free_sysfs_attr:
lpfc_free_sysfs_attr(phba);
out_kthread_stop:
kthread_stop(phba->worker_thread);
out_free_iocbq:
list_for_each_entry_safe(iocbq_entry, iocbq_next,
&phba->lpfc_iocb_list, list) {
spin_lock_irq(phba->host->host_lock);
kfree(iocbq_entry);
phba->total_iocbq_bufs--;
spin_unlock_irq(phba->host->host_lock);
}
lpfc_mem_free(phba);
out_free_slim:
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE, phba->slim2p,
phba->slim2p_mapping);
out_iounmap:
iounmap(phba->ctrl_regs_memmap_p);
out_iounmap_slim:
iounmap(phba->slim_memmap_p);
out_idr_remove:
idr_remove(&lpfc_hba_index, phba->brd_no);
out_put_host:
scsi_host_put(host);
out_release_regions:
pci_release_regions(pdev);
out_disable_device:
pci_disable_device(pdev);
out:
return error;
}
static void __devexit
lpfc_pci_remove_one(struct pci_dev *pdev)
{
struct Scsi_Host *host = pci_get_drvdata(pdev);
struct lpfc_hba *phba = (struct lpfc_hba *)host->hostdata[0];
unsigned long iflag;
lpfc_free_sysfs_attr(phba);
spin_lock_irqsave(phba->host->host_lock, iflag);
phba->fc_flag |= FC_UNLOADING;
spin_unlock_irqrestore(phba->host->host_lock, iflag);
fc_remove_host(phba->host);
scsi_remove_host(phba->host);
kthread_stop(phba->worker_thread);
/*
* Bring down the SLI Layer. This step disable all interrupts,
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
lpfc_sli_hba_down(phba);
/* Release the irq reservation */
free_irq(phba->pcidev->irq, phba);
lpfc_cleanup(phba, 0);
lpfc_stop_timer(phba);
phba->work_hba_events = 0;
/*
* Call scsi_free before mem_free since scsi bufs are released to their
* corresponding pools here.
*/
lpfc_scsi_free(phba);
lpfc_mem_free(phba);
/* Free resources associated with SLI2 interface */
dma_free_coherent(&pdev->dev, SLI2_SLIM_SIZE,
phba->slim2p, phba->slim2p_mapping);
/* unmap adapter SLIM and Control Registers */
iounmap(phba->ctrl_regs_memmap_p);
iounmap(phba->slim_memmap_p);
pci_release_regions(phba->pcidev);
pci_disable_device(phba->pcidev);
idr_remove(&lpfc_hba_index, phba->brd_no);
scsi_host_put(phba->host);
pci_set_drvdata(pdev, NULL);
}
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_FIREFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_THOR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PEGASUS,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_CENTAUR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_DRAGONFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_SUPERFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_RFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_PFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_NEPTUNE_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_HELIOS_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BMID,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_BSMB,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_SCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZEPHYR_DCSP,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZMID,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_ZSMB,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_TFLY,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP101,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP10000S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LP11000S,
PCI_ANY_ID, PCI_ANY_ID, },
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_LPE11000S,
PCI_ANY_ID, PCI_ANY_ID, },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, lpfc_id_table);
static struct pci_driver lpfc_driver = {
.name = LPFC_DRIVER_NAME,
.id_table = lpfc_id_table,
.probe = lpfc_pci_probe_one,
.remove = __devexit_p(lpfc_pci_remove_one),
};
static int __init
lpfc_init(void)
{
int error = 0;
printk(LPFC_MODULE_DESC "\n");
printk(LPFC_COPYRIGHT "\n");
lpfc_transport_template =
fc_attach_transport(&lpfc_transport_functions);
if (!lpfc_transport_template)
return -ENOMEM;
error = pci_register_driver(&lpfc_driver);
if (error)
fc_release_transport(lpfc_transport_template);
return error;
}
static void __exit
lpfc_exit(void)
{
pci_unregister_driver(&lpfc_driver);
fc_release_transport(lpfc_transport_template);
}
module_init(lpfc_init);
module_exit(lpfc_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(LPFC_MODULE_DESC);
MODULE_AUTHOR("Emulex Corporation - tech.support@emulex.com");
MODULE_VERSION("0:" LPFC_DRIVER_VERSION);