linux/drivers/input/touchscreen/migor_ts.c

261 lines
6.3 KiB
C
Raw Normal View History

/*
* Touch Screen driver for Renesas MIGO-R Platform
*
* Copyright (c) 2008 Magnus Damm
* Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
* Kenati Technologies Pvt Ltd.
*
* This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/pm.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/io.h>
#include <linux/i2c.h>
#include <linux/timer.h>
#define EVENT_PENDOWN 1
#define EVENT_REPEAT 2
#define EVENT_PENUP 3
struct migor_ts_priv {
struct i2c_client *client;
struct input_dev *input;
int irq;
};
static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
0x01, 0x06, 0x07, };
static const u_int8_t migor_ts_dis_seq[17] = { };
static irqreturn_t migor_ts_isr(int irq, void *dev_id)
{
struct migor_ts_priv *priv = dev_id;
unsigned short xpos, ypos;
unsigned char event;
u_int8_t buf[16];
/*
* The touch screen controller chip is hooked up to the CPU
* using I2C and a single interrupt line. The interrupt line
* is pulled low whenever someone taps the screen. To deassert
* the interrupt line we need to acknowledge the interrupt by
* communicating with the controller over the slow i2c bus.
*
* Since I2C bus controller may sleep we are using threaded
* IRQ here.
*/
memset(buf, 0, sizeof(buf));
/* Set Index 0 */
buf[0] = 0;
if (i2c_master_send(priv->client, buf, 1) != 1) {
dev_err(&priv->client->dev, "Unable to write i2c index\n");
goto out;
}
/* Now do Page Read */
if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) {
dev_err(&priv->client->dev, "Unable to read i2c page\n");
goto out;
}
ypos = ((buf[9] & 0x03) << 8 | buf[8]);
xpos = ((buf[11] & 0x03) << 8 | buf[10]);
event = buf[12];
switch (event) {
case EVENT_PENDOWN:
case EVENT_REPEAT:
input_report_key(priv->input, BTN_TOUCH, 1);
input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
input_report_abs(priv->input, ABS_Y, xpos);
input_sync(priv->input);
break;
case EVENT_PENUP:
input_report_key(priv->input, BTN_TOUCH, 0);
input_sync(priv->input);
break;
}
out:
return IRQ_HANDLED;
}
static int migor_ts_open(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
struct i2c_client *client = priv->client;
int count;
/* enable controller */
count = i2c_master_send(client, migor_ts_ena_seq,
sizeof(migor_ts_ena_seq));
if (count != sizeof(migor_ts_ena_seq)) {
dev_err(&client->dev, "Unable to enable touchscreen.\n");
return -ENXIO;
}
return 0;
}
static void migor_ts_close(struct input_dev *dev)
{
struct migor_ts_priv *priv = input_get_drvdata(dev);
struct i2c_client *client = priv->client;
disable_irq(priv->irq);
/* disable controller */
i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
enable_irq(priv->irq);
}
static int migor_ts_probe(struct i2c_client *client,
const struct i2c_device_id *idp)
{
struct migor_ts_priv *priv;
struct input_dev *input;
int error;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
input = input_allocate_device();
if (!priv || !input) {
dev_err(&client->dev, "failed to allocate memory\n");
error = -ENOMEM;
goto err_free_mem;
}
priv->client = client;
priv->input = input;
priv->irq = client->irq;
input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
__set_bit(BTN_TOUCH, input->keybit);
input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
input->name = client->name;
input->id.bustype = BUS_I2C;
input->dev.parent = &client->dev;
input->open = migor_ts_open;
input->close = migor_ts_close;
input_set_drvdata(input, priv);
error = request_threaded_irq(priv->irq, NULL, migor_ts_isr,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, priv);
if (error) {
dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
goto err_free_mem;
}
error = input_register_device(input);
if (error)
goto err_free_irq;
i2c_set_clientdata(client, priv);
device_init_wakeup(&client->dev, 1);
return 0;
err_free_irq:
free_irq(priv->irq, priv);
err_free_mem:
input_free_device(input);
kfree(priv);
return error;
}
static int migor_ts_remove(struct i2c_client *client)
{
struct migor_ts_priv *priv = i2c_get_clientdata(client);
free_irq(priv->irq, priv);
input_unregister_device(priv->input);
kfree(priv);
dev_set_drvdata(&client->dev, NULL);
return 0;
}
static int migor_ts_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct migor_ts_priv *priv = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
enable_irq_wake(priv->irq);
return 0;
}
static int migor_ts_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct migor_ts_priv *priv = i2c_get_clientdata(client);
if (device_may_wakeup(&client->dev))
disable_irq_wake(priv->irq);
return 0;
}
static SIMPLE_DEV_PM_OPS(migor_ts_pm, migor_ts_suspend, migor_ts_resume);
static const struct i2c_device_id migor_ts_id[] = {
{ "migor_ts", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, migor_ts);
static struct i2c_driver migor_ts_driver = {
.driver = {
.name = "migor_ts",
.pm = &migor_ts_pm,
},
.probe = migor_ts_probe,
.remove = migor_ts_remove,
.id_table = migor_ts_id,
};
static int __init migor_ts_init(void)
{
return i2c_add_driver(&migor_ts_driver);
}
static void __exit migor_ts_exit(void)
{
i2c_del_driver(&migor_ts_driver);
}
MODULE_DESCRIPTION("MigoR Touchscreen driver");
MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
MODULE_LICENSE("GPL");
module_init(migor_ts_init);
module_exit(migor_ts_exit);