2017-11-03 18:28:30 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2011-01-18 14:49:28 +08:00
|
|
|
/*
|
|
|
|
* Fusb300 UDC (USB gadget)
|
|
|
|
*
|
|
|
|
* Copyright (C) 2010 Faraday Technology Corp.
|
|
|
|
*
|
|
|
|
* Author : Yuan-hsin Chen <yhchen@faraday-tech.com>
|
|
|
|
*/
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/io.h>
|
2011-07-04 04:09:31 +08:00
|
|
|
#include <linux/module.h>
|
2011-01-18 14:49:28 +08:00
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/usb/ch9.h>
|
|
|
|
#include <linux/usb/gadget.h>
|
|
|
|
|
|
|
|
#include "fusb300_udc.h"
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("FUSB300 USB gadget driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
2013-09-04 05:46:26 +08:00
|
|
|
MODULE_AUTHOR("Yuan-Hsin Chen, Feng-Hsin Chiang <john453@faraday-tech.com>");
|
2011-01-18 14:49:28 +08:00
|
|
|
MODULE_ALIAS("platform:fusb300_udc");
|
|
|
|
|
|
|
|
#define DRIVER_VERSION "20 October 2010"
|
|
|
|
|
|
|
|
static const char udc_name[] = "fusb300_udc";
|
|
|
|
static const char * const fusb300_ep_name[] = {
|
2011-02-08 01:01:36 +08:00
|
|
|
"ep0", "ep1", "ep2", "ep3", "ep4", "ep5", "ep6", "ep7", "ep8", "ep9",
|
|
|
|
"ep10", "ep11", "ep12", "ep13", "ep14", "ep15"
|
2011-01-18 14:49:28 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static void done(struct fusb300_ep *ep, struct fusb300_request *req,
|
|
|
|
int status);
|
|
|
|
|
|
|
|
static void fusb300_enable_bit(struct fusb300 *fusb300, u32 offset,
|
|
|
|
u32 value)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + offset);
|
|
|
|
|
|
|
|
reg |= value;
|
|
|
|
iowrite32(reg, fusb300->reg + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_disable_bit(struct fusb300 *fusb300, u32 offset,
|
|
|
|
u32 value)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + offset);
|
|
|
|
|
|
|
|
reg &= ~value;
|
|
|
|
iowrite32(reg, fusb300->reg + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void fusb300_ep_setting(struct fusb300_ep *ep,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
ep->epnum = info.epnum;
|
|
|
|
ep->type = info.type;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_ep_release(struct fusb300_ep *ep)
|
|
|
|
{
|
|
|
|
if (!ep->epnum)
|
|
|
|
return 0;
|
|
|
|
ep->epnum = 0;
|
|
|
|
ep->stall = 0;
|
|
|
|
ep->wedged = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_fifo_entry(struct fusb300 *fusb300,
|
|
|
|
u32 ep)
|
|
|
|
{
|
|
|
|
u32 val = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
|
|
|
|
|
|
|
|
val &= ~FUSB300_EPSET1_FIFOENTRY_MSK;
|
|
|
|
val |= FUSB300_EPSET1_FIFOENTRY(FUSB300_FIFO_ENTRY_NUM);
|
|
|
|
iowrite32(val, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_start_entry(struct fusb300 *fusb300,
|
|
|
|
u8 ep)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
|
|
|
|
u32 start_entry = fusb300->fifo_entry_num * FUSB300_FIFO_ENTRY_NUM;
|
|
|
|
|
|
|
|
reg &= ~FUSB300_EPSET1_START_ENTRY_MSK ;
|
|
|
|
reg |= FUSB300_EPSET1_START_ENTRY(start_entry);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
|
|
|
|
if (fusb300->fifo_entry_num == FUSB300_MAX_FIFO_ENTRY) {
|
|
|
|
fusb300->fifo_entry_num = 0;
|
|
|
|
fusb300->addrofs = 0;
|
|
|
|
pr_err("fifo entry is over the maximum number!\n");
|
|
|
|
} else
|
|
|
|
fusb300->fifo_entry_num++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* set fusb300_set_start_entry first before fusb300_set_epaddrofs */
|
|
|
|
static void fusb300_set_epaddrofs(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
|
|
|
|
|
|
|
|
reg &= ~FUSB300_EPSET2_ADDROFS_MSK;
|
|
|
|
reg |= FUSB300_EPSET2_ADDROFS(fusb300->addrofs);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
|
|
|
|
fusb300->addrofs += (info.maxpacket + 7) / 8 * FUSB300_FIFO_ENTRY_NUM;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep_fifo_setting(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
fusb300_set_fifo_entry(fusb300, info.epnum);
|
|
|
|
fusb300_set_start_entry(fusb300, info.epnum);
|
|
|
|
fusb300_set_epaddrofs(fusb300, info);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_eptype(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
|
|
|
|
reg &= ~FUSB300_EPSET1_TYPE_MSK;
|
|
|
|
reg |= FUSB300_EPSET1_TYPE(info.type);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_epdir(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
if (!info.dir_in)
|
|
|
|
return;
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
reg &= ~FUSB300_EPSET1_DIR_MSK;
|
|
|
|
reg |= FUSB300_EPSET1_DIRIN;
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_ep_active(struct fusb300 *fusb300,
|
|
|
|
u8 ep)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
|
|
|
|
|
|
|
|
reg |= FUSB300_EPSET1_ACTEN;
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(ep));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_epmps(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
|
|
|
|
|
|
|
|
reg &= ~FUSB300_EPSET2_MPS_MSK;
|
|
|
|
reg |= FUSB300_EPSET2_MPS(info.maxpacket);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET2(info.epnum));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_interval(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
|
|
|
|
reg &= ~FUSB300_EPSET1_INTERVAL(0x7);
|
|
|
|
reg |= FUSB300_EPSET1_INTERVAL(info.interval);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_bwnum(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
|
|
|
|
reg &= ~FUSB300_EPSET1_BWNUM(0x3);
|
|
|
|
reg |= FUSB300_EPSET1_BWNUM(info.bw_num);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET1(info.epnum));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_ep_reg(struct fusb300 *fusb300,
|
|
|
|
struct fusb300_ep_info info)
|
|
|
|
{
|
|
|
|
fusb300_set_eptype(fusb300, info);
|
|
|
|
fusb300_set_epdir(fusb300, info);
|
|
|
|
fusb300_set_epmps(fusb300, info);
|
|
|
|
|
|
|
|
if (info.interval)
|
|
|
|
fusb300_set_interval(fusb300, info);
|
|
|
|
|
|
|
|
if (info.bw_num)
|
|
|
|
fusb300_set_bwnum(fusb300, info);
|
|
|
|
|
|
|
|
fusb300_set_ep_active(fusb300, info.epnum);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int config_ep(struct fusb300_ep *ep,
|
|
|
|
const struct usb_endpoint_descriptor *desc)
|
|
|
|
{
|
|
|
|
struct fusb300 *fusb300 = ep->fusb300;
|
|
|
|
struct fusb300_ep_info info;
|
|
|
|
|
2012-03-13 02:25:30 +08:00
|
|
|
ep->ep.desc = desc;
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
info.interval = 0;
|
|
|
|
info.addrofs = 0;
|
|
|
|
info.bw_num = 0;
|
|
|
|
|
|
|
|
info.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
|
|
|
|
info.dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
|
2011-08-23 18:12:03 +08:00
|
|
|
info.maxpacket = usb_endpoint_maxp(desc);
|
2011-01-18 14:49:28 +08:00
|
|
|
info.epnum = desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
|
|
|
|
|
|
|
|
if ((info.type == USB_ENDPOINT_XFER_INT) ||
|
|
|
|
(info.type == USB_ENDPOINT_XFER_ISOC)) {
|
|
|
|
info.interval = desc->bInterval;
|
|
|
|
if (info.type == USB_ENDPOINT_XFER_ISOC)
|
2016-09-28 18:35:15 +08:00
|
|
|
info.bw_num = usb_endpoint_maxp_mult(desc);
|
2011-01-18 14:49:28 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
ep_fifo_setting(fusb300, info);
|
|
|
|
|
|
|
|
set_ep_reg(fusb300, info);
|
|
|
|
|
|
|
|
fusb300_ep_setting(ep, info);
|
|
|
|
|
|
|
|
fusb300->ep[info.epnum] = ep;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_enable(struct usb_ep *_ep,
|
|
|
|
const struct usb_endpoint_descriptor *desc)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct fusb300_ep, ep);
|
|
|
|
|
|
|
|
if (ep->fusb300->reenum) {
|
|
|
|
ep->fusb300->fifo_entry_num = 0;
|
|
|
|
ep->fusb300->addrofs = 0;
|
|
|
|
ep->fusb300->reenum = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return config_ep(ep, desc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_disable(struct usb_ep *_ep)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep;
|
|
|
|
struct fusb300_request *req;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct fusb300_ep, ep);
|
|
|
|
|
|
|
|
BUG_ON(!ep);
|
|
|
|
|
|
|
|
while (!list_empty(&ep->queue)) {
|
|
|
|
req = list_entry(ep->queue.next, struct fusb300_request, queue);
|
|
|
|
spin_lock_irqsave(&ep->fusb300->lock, flags);
|
|
|
|
done(ep, req, -ECONNRESET);
|
|
|
|
spin_unlock_irqrestore(&ep->fusb300->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
return fusb300_ep_release(ep);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct usb_request *fusb300_alloc_request(struct usb_ep *_ep,
|
|
|
|
gfp_t gfp_flags)
|
|
|
|
{
|
|
|
|
struct fusb300_request *req;
|
|
|
|
|
|
|
|
req = kzalloc(sizeof(struct fusb300_request), gfp_flags);
|
|
|
|
if (!req)
|
|
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&req->queue);
|
|
|
|
|
|
|
|
return &req->req;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_free_request(struct usb_ep *_ep, struct usb_request *_req)
|
|
|
|
{
|
|
|
|
struct fusb300_request *req;
|
|
|
|
|
|
|
|
req = container_of(_req, struct fusb300_request, req);
|
|
|
|
kfree(req);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int enable_fifo_int(struct fusb300_ep *ep)
|
|
|
|
{
|
|
|
|
struct fusb300 *fusb300 = ep->fusb300;
|
|
|
|
|
|
|
|
if (ep->epnum) {
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_IGER0,
|
|
|
|
FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
|
|
|
|
} else {
|
|
|
|
pr_err("can't enable_fifo_int ep0\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int disable_fifo_int(struct fusb300_ep *ep)
|
|
|
|
{
|
|
|
|
struct fusb300 *fusb300 = ep->fusb300;
|
|
|
|
|
|
|
|
if (ep->epnum) {
|
|
|
|
fusb300_disable_bit(fusb300, FUSB300_OFFSET_IGER0,
|
|
|
|
FUSB300_IGER0_EEPn_FIFO_INT(ep->epnum));
|
|
|
|
} else {
|
|
|
|
pr_err("can't disable_fifo_int ep0\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_cxlen(struct fusb300 *fusb300, u32 length)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
|
|
|
|
reg &= ~FUSB300_CSR_LEN_MSK;
|
|
|
|
reg |= FUSB300_CSR_LEN(length);
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_CSR);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* write data to cx fifo */
|
|
|
|
static void fusb300_wrcxf(struct fusb300_ep *ep,
|
|
|
|
struct fusb300_request *req)
|
|
|
|
{
|
|
|
|
int i = 0;
|
|
|
|
u8 *tmp;
|
|
|
|
u32 data;
|
|
|
|
struct fusb300 *fusb300 = ep->fusb300;
|
|
|
|
u32 length = req->req.length - req->req.actual;
|
|
|
|
|
|
|
|
tmp = req->req.buf + req->req.actual;
|
|
|
|
|
|
|
|
if (length > SS_CTL_MAX_PACKET_SIZE) {
|
|
|
|
fusb300_set_cxlen(fusb300, SS_CTL_MAX_PACKET_SIZE);
|
|
|
|
for (i = (SS_CTL_MAX_PACKET_SIZE >> 2); i > 0; i--) {
|
|
|
|
data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
|
|
|
|
*(tmp + 3) << 24;
|
|
|
|
iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
tmp += 4;
|
|
|
|
}
|
|
|
|
req->req.actual += SS_CTL_MAX_PACKET_SIZE;
|
|
|
|
} else { /* length is less than max packet size */
|
|
|
|
fusb300_set_cxlen(fusb300, length);
|
|
|
|
for (i = length >> 2; i > 0; i--) {
|
|
|
|
data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16 |
|
|
|
|
*(tmp + 3) << 24;
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
tmp = tmp + 4;
|
|
|
|
}
|
|
|
|
switch (length % 4) {
|
|
|
|
case 1:
|
|
|
|
data = *tmp;
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
data = *tmp | *(tmp + 1) << 8;
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
data = *tmp | *(tmp + 1) << 8 | *(tmp + 2) << 16;
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
iowrite32(data, fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
req->req.actual += length;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_epnstall(struct fusb300 *fusb300, u8 ep)
|
|
|
|
{
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
|
|
|
|
FUSB300_EPSET0_STL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_clear_epnstall(struct fusb300 *fusb300, u8 ep)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
|
|
|
|
|
|
|
|
if (reg & FUSB300_EPSET0_STL) {
|
|
|
|
printk(KERN_DEBUG "EP%d stall... Clear!!\n", ep);
|
2013-04-02 19:15:28 +08:00
|
|
|
reg |= FUSB300_EPSET0_STL_CLR;
|
2011-01-18 14:49:28 +08:00
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ep0_queue(struct fusb300_ep *ep, struct fusb300_request *req)
|
|
|
|
{
|
|
|
|
if (ep->fusb300->ep0_dir) { /* if IN */
|
|
|
|
if (req->req.length) {
|
|
|
|
fusb300_wrcxf(ep, req);
|
|
|
|
} else
|
|
|
|
printk(KERN_DEBUG "%s : req->req.length = 0x%x\n",
|
|
|
|
__func__, req->req.length);
|
|
|
|
if ((req->req.length == req->req.actual) ||
|
|
|
|
(req->req.actual < ep->ep.maxpacket))
|
|
|
|
done(ep, req, 0);
|
|
|
|
} else { /* OUT */
|
|
|
|
if (!req->req.length)
|
|
|
|
done(ep, req, 0);
|
|
|
|
else
|
|
|
|
fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER1,
|
|
|
|
FUSB300_IGER1_CX_OUT_INT);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_queue(struct usb_ep *_ep, struct usb_request *_req,
|
|
|
|
gfp_t gfp_flags)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep;
|
|
|
|
struct fusb300_request *req;
|
|
|
|
unsigned long flags;
|
|
|
|
int request = 0;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct fusb300_ep, ep);
|
|
|
|
req = container_of(_req, struct fusb300_request, req);
|
|
|
|
|
|
|
|
if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
|
|
|
|
return -ESHUTDOWN;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ep->fusb300->lock, flags);
|
|
|
|
|
|
|
|
if (list_empty(&ep->queue))
|
|
|
|
request = 1;
|
|
|
|
|
|
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
|
|
|
|
|
|
req->req.actual = 0;
|
|
|
|
req->req.status = -EINPROGRESS;
|
|
|
|
|
2012-03-13 02:25:30 +08:00
|
|
|
if (ep->ep.desc == NULL) /* ep0 */
|
2011-01-18 14:49:28 +08:00
|
|
|
ep0_queue(ep, req);
|
|
|
|
else if (request && !ep->stall)
|
|
|
|
enable_fifo_int(ep);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&ep->fusb300->lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep;
|
|
|
|
struct fusb300_request *req;
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct fusb300_ep, ep);
|
|
|
|
req = container_of(_req, struct fusb300_request, req);
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ep->fusb300->lock, flags);
|
|
|
|
if (!list_empty(&ep->queue))
|
|
|
|
done(ep, req, -ECONNRESET);
|
|
|
|
spin_unlock_irqrestore(&ep->fusb300->lock, flags);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_set_halt_and_wedge(struct usb_ep *_ep, int value, int wedge)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep;
|
|
|
|
struct fusb300 *fusb300;
|
|
|
|
unsigned long flags;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ep = container_of(_ep, struct fusb300_ep, ep);
|
|
|
|
|
|
|
|
fusb300 = ep->fusb300;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&ep->fusb300->lock, flags);
|
|
|
|
|
|
|
|
if (!list_empty(&ep->queue)) {
|
|
|
|
ret = -EAGAIN;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (value) {
|
|
|
|
fusb300_set_epnstall(fusb300, ep->epnum);
|
|
|
|
ep->stall = 1;
|
|
|
|
if (wedge)
|
|
|
|
ep->wedged = 1;
|
|
|
|
} else {
|
|
|
|
fusb300_clear_epnstall(fusb300, ep->epnum);
|
|
|
|
ep->stall = 0;
|
|
|
|
ep->wedged = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
out:
|
|
|
|
spin_unlock_irqrestore(&ep->fusb300->lock, flags);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_set_halt(struct usb_ep *_ep, int value)
|
|
|
|
{
|
|
|
|
return fusb300_set_halt_and_wedge(_ep, value, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int fusb300_set_wedge(struct usb_ep *_ep)
|
|
|
|
{
|
|
|
|
return fusb300_set_halt_and_wedge(_ep, 1, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_fifo_flush(struct usb_ep *_ep)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2017-01-24 01:26:04 +08:00
|
|
|
static const struct usb_ep_ops fusb300_ep_ops = {
|
2011-01-18 14:49:28 +08:00
|
|
|
.enable = fusb300_enable,
|
|
|
|
.disable = fusb300_disable,
|
|
|
|
|
|
|
|
.alloc_request = fusb300_alloc_request,
|
|
|
|
.free_request = fusb300_free_request,
|
|
|
|
|
|
|
|
.queue = fusb300_queue,
|
|
|
|
.dequeue = fusb300_dequeue,
|
|
|
|
|
|
|
|
.set_halt = fusb300_set_halt,
|
|
|
|
.fifo_flush = fusb300_fifo_flush,
|
|
|
|
.set_wedge = fusb300_set_wedge,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*****************************************************************************/
|
|
|
|
static void fusb300_clear_int(struct fusb300 *fusb300, u32 offset,
|
|
|
|
u32 value)
|
|
|
|
{
|
|
|
|
iowrite32(value, fusb300->reg + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_reset(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_cxstall(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
|
|
|
|
FUSB300_CSR_STL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_cxdone(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_CSR,
|
|
|
|
FUSB300_CSR_DONE);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* read data from cx fifo */
|
2013-08-02 16:17:05 +08:00
|
|
|
static void fusb300_rdcxf(struct fusb300 *fusb300,
|
2011-01-18 14:49:28 +08:00
|
|
|
u8 *buffer, u32 length)
|
|
|
|
{
|
|
|
|
int i = 0;
|
|
|
|
u8 *tmp;
|
|
|
|
u32 data;
|
|
|
|
|
|
|
|
tmp = buffer;
|
|
|
|
|
|
|
|
for (i = (length >> 2); i > 0; i--) {
|
|
|
|
data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
*(tmp + 1) = (data >> 8) & 0xFF;
|
|
|
|
*(tmp + 2) = (data >> 16) & 0xFF;
|
|
|
|
*(tmp + 3) = (data >> 24) & 0xFF;
|
|
|
|
tmp = tmp + 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (length % 4) {
|
|
|
|
case 1:
|
|
|
|
data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
*(tmp + 1) = (data >> 8) & 0xFF;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
data = ioread32(fusb300->reg + FUSB300_OFFSET_CXPORT);
|
|
|
|
printk(KERN_DEBUG " 0x%x\n", data);
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
*(tmp + 1) = (data >> 8) & 0xFF;
|
|
|
|
*(tmp + 2) = (data >> 16) & 0xFF;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_rdfifo(struct fusb300_ep *ep,
|
|
|
|
struct fusb300_request *req,
|
|
|
|
u32 length)
|
|
|
|
{
|
|
|
|
int i = 0;
|
|
|
|
u8 *tmp;
|
|
|
|
u32 data, reg;
|
|
|
|
struct fusb300 *fusb300 = ep->fusb300;
|
|
|
|
|
|
|
|
tmp = req->req.buf + req->req.actual;
|
|
|
|
req->req.actual += length;
|
|
|
|
|
|
|
|
if (req->req.actual > req->req.length)
|
|
|
|
printk(KERN_DEBUG "req->req.actual > req->req.length\n");
|
|
|
|
|
|
|
|
for (i = (length >> 2); i > 0; i--) {
|
|
|
|
data = ioread32(fusb300->reg +
|
|
|
|
FUSB300_OFFSET_EPPORT(ep->epnum));
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
*(tmp + 1) = (data >> 8) & 0xFF;
|
|
|
|
*(tmp + 2) = (data >> 16) & 0xFF;
|
|
|
|
*(tmp + 3) = (data >> 24) & 0xFF;
|
|
|
|
tmp = tmp + 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (length % 4) {
|
|
|
|
case 1:
|
|
|
|
data = ioread32(fusb300->reg +
|
|
|
|
FUSB300_OFFSET_EPPORT(ep->epnum));
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
data = ioread32(fusb300->reg +
|
|
|
|
FUSB300_OFFSET_EPPORT(ep->epnum));
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
*(tmp + 1) = (data >> 8) & 0xFF;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
data = ioread32(fusb300->reg +
|
|
|
|
FUSB300_OFFSET_EPPORT(ep->epnum));
|
|
|
|
*tmp = data & 0xFF;
|
|
|
|
*(tmp + 1) = (data >> 8) & 0xFF;
|
|
|
|
*(tmp + 2) = (data >> 16) & 0xFF;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
do {
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
|
|
|
|
reg &= FUSB300_IGR1_SYNF0_EMPTY_INT;
|
|
|
|
if (i)
|
|
|
|
printk(KERN_INFO "sync fifo is not empty!\n");
|
|
|
|
i++;
|
|
|
|
} while (!reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 fusb300_get_epnstall(struct fusb300 *fusb300, u8 ep)
|
|
|
|
{
|
|
|
|
u8 value;
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPSET0(ep));
|
|
|
|
|
|
|
|
value = reg & FUSB300_EPSET0_STL;
|
|
|
|
|
|
|
|
return value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u8 fusb300_get_cxstall(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
u8 value;
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_CSR);
|
|
|
|
|
|
|
|
value = (reg & FUSB300_CSR_STL) >> 1;
|
|
|
|
|
|
|
|
return value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void request_error(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
fusb300_set_cxstall(fusb300);
|
|
|
|
printk(KERN_DEBUG "request error!!\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void get_status(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
|
|
|
|
__releases(fusb300->lock)
|
|
|
|
__acquires(fusb300->lock)
|
|
|
|
{
|
|
|
|
u8 ep;
|
|
|
|
u16 status = 0;
|
|
|
|
u16 w_index = ctrl->wIndex;
|
|
|
|
|
|
|
|
switch (ctrl->bRequestType & USB_RECIP_MASK) {
|
|
|
|
case USB_RECIP_DEVICE:
|
|
|
|
status = 1 << USB_DEVICE_SELF_POWERED;
|
|
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
|
|
status = 0;
|
|
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
|
|
ep = w_index & USB_ENDPOINT_NUMBER_MASK;
|
|
|
|
if (ep) {
|
|
|
|
if (fusb300_get_epnstall(fusb300, ep))
|
|
|
|
status = 1 << USB_ENDPOINT_HALT;
|
|
|
|
} else {
|
|
|
|
if (fusb300_get_cxstall(fusb300))
|
|
|
|
status = 0;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
request_error(fusb300);
|
|
|
|
return; /* exit */
|
|
|
|
}
|
|
|
|
|
|
|
|
fusb300->ep0_data = cpu_to_le16(status);
|
|
|
|
fusb300->ep0_req->buf = &fusb300->ep0_data;
|
|
|
|
fusb300->ep0_req->length = 2;
|
|
|
|
|
|
|
|
spin_unlock(&fusb300->lock);
|
|
|
|
fusb300_queue(fusb300->gadget.ep0, fusb300->ep0_req, GFP_KERNEL);
|
|
|
|
spin_lock(&fusb300->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
|
|
|
|
{
|
|
|
|
u8 ep;
|
|
|
|
|
|
|
|
switch (ctrl->bRequestType & USB_RECIP_MASK) {
|
|
|
|
case USB_RECIP_DEVICE:
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT: {
|
|
|
|
u16 w_index = le16_to_cpu(ctrl->wIndex);
|
|
|
|
|
|
|
|
ep = w_index & USB_ENDPOINT_NUMBER_MASK;
|
|
|
|
if (ep)
|
|
|
|
fusb300_set_epnstall(fusb300, ep);
|
|
|
|
else
|
|
|
|
fusb300_set_cxstall(fusb300);
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
request_error(fusb300);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_clear_seqnum(struct fusb300 *fusb300, u8 ep)
|
|
|
|
{
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_EPSET0(ep),
|
|
|
|
FUSB300_EPSET0_CLRSEQNUM);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void clear_feature(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep =
|
|
|
|
fusb300->ep[ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK];
|
|
|
|
|
|
|
|
switch (ctrl->bRequestType & USB_RECIP_MASK) {
|
|
|
|
case USB_RECIP_DEVICE:
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
break;
|
|
|
|
case USB_RECIP_INTERFACE:
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
break;
|
|
|
|
case USB_RECIP_ENDPOINT:
|
|
|
|
if (ctrl->wIndex & USB_ENDPOINT_NUMBER_MASK) {
|
|
|
|
if (ep->wedged) {
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (ep->stall) {
|
|
|
|
ep->stall = 0;
|
|
|
|
fusb300_clear_seqnum(fusb300, ep->epnum);
|
|
|
|
fusb300_clear_epnstall(fusb300, ep->epnum);
|
|
|
|
if (!list_empty(&ep->queue))
|
|
|
|
enable_fifo_int(ep);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
request_error(fusb300);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_dev_addr(struct fusb300 *fusb300, u16 addr)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_DAR);
|
|
|
|
|
|
|
|
reg &= ~FUSB300_DAR_DRVADDR_MSK;
|
|
|
|
reg |= FUSB300_DAR_DRVADDR(addr);
|
|
|
|
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_DAR);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void set_address(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
|
|
|
|
{
|
|
|
|
if (ctrl->wValue >= 0x0100)
|
|
|
|
request_error(fusb300);
|
|
|
|
else {
|
|
|
|
fusb300_set_dev_addr(fusb300, ctrl->wValue);
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define UVC_COPY_DESCRIPTORS(mem, src) \
|
|
|
|
do { \
|
|
|
|
const struct usb_descriptor_header * const *__src; \
|
|
|
|
for (__src = src; *__src; ++__src) { \
|
|
|
|
memcpy(mem, *__src, (*__src)->bLength); \
|
|
|
|
mem += (*__src)->bLength; \
|
|
|
|
} \
|
|
|
|
} while (0)
|
|
|
|
|
|
|
|
static int setup_packet(struct fusb300 *fusb300, struct usb_ctrlrequest *ctrl)
|
|
|
|
{
|
|
|
|
u8 *p = (u8 *)ctrl;
|
|
|
|
u8 ret = 0;
|
|
|
|
u8 i = 0;
|
|
|
|
|
|
|
|
fusb300_rdcxf(fusb300, p, 8);
|
|
|
|
fusb300->ep0_dir = ctrl->bRequestType & USB_DIR_IN;
|
|
|
|
fusb300->ep0_length = ctrl->wLength;
|
|
|
|
|
|
|
|
/* check request */
|
|
|
|
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
|
|
|
|
switch (ctrl->bRequest) {
|
|
|
|
case USB_REQ_GET_STATUS:
|
|
|
|
get_status(fusb300, ctrl);
|
|
|
|
break;
|
|
|
|
case USB_REQ_CLEAR_FEATURE:
|
|
|
|
clear_feature(fusb300, ctrl);
|
|
|
|
break;
|
|
|
|
case USB_REQ_SET_FEATURE:
|
|
|
|
set_feature(fusb300, ctrl);
|
|
|
|
break;
|
|
|
|
case USB_REQ_SET_ADDRESS:
|
|
|
|
set_address(fusb300, ctrl);
|
|
|
|
break;
|
|
|
|
case USB_REQ_SET_CONFIGURATION:
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_DAR,
|
|
|
|
FUSB300_DAR_SETCONFG);
|
|
|
|
/* clear sequence number */
|
|
|
|
for (i = 1; i <= FUSB300_MAX_NUM_EP; i++)
|
|
|
|
fusb300_clear_seqnum(fusb300, i);
|
|
|
|
fusb300->reenum = 1;
|
|
|
|
ret = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
ret = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
} else
|
|
|
|
ret = 1;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void done(struct fusb300_ep *ep, struct fusb300_request *req,
|
|
|
|
int status)
|
|
|
|
{
|
|
|
|
list_del_init(&req->queue);
|
|
|
|
|
|
|
|
/* don't modify queue heads during completion callback */
|
|
|
|
if (ep->fusb300->gadget.speed == USB_SPEED_UNKNOWN)
|
|
|
|
req->req.status = -ESHUTDOWN;
|
|
|
|
else
|
|
|
|
req->req.status = status;
|
|
|
|
|
|
|
|
spin_unlock(&ep->fusb300->lock);
|
2014-09-25 04:43:19 +08:00
|
|
|
usb_gadget_giveback_request(&ep->ep, &req->req);
|
2011-01-18 14:49:28 +08:00
|
|
|
spin_lock(&ep->fusb300->lock);
|
|
|
|
|
|
|
|
if (ep->epnum) {
|
|
|
|
disable_fifo_int(ep);
|
|
|
|
if (!list_empty(&ep->queue))
|
|
|
|
enable_fifo_int(ep);
|
|
|
|
} else
|
|
|
|
fusb300_set_cxdone(ep->fusb300);
|
|
|
|
}
|
|
|
|
|
2011-07-05 20:59:05 +08:00
|
|
|
static void fusb300_fill_idma_prdtbl(struct fusb300_ep *ep, dma_addr_t d,
|
|
|
|
u32 len)
|
2011-01-18 14:49:28 +08:00
|
|
|
{
|
|
|
|
u32 value;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
/* wait SW owner */
|
|
|
|
do {
|
|
|
|
reg = ioread32(ep->fusb300->reg +
|
|
|
|
FUSB300_OFFSET_EPPRD_W0(ep->epnum));
|
|
|
|
reg &= FUSB300_EPPRD0_H;
|
|
|
|
} while (reg);
|
|
|
|
|
2011-07-05 20:59:05 +08:00
|
|
|
iowrite32(d, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W1(ep->epnum));
|
2011-01-18 14:49:28 +08:00
|
|
|
|
2011-07-05 20:59:05 +08:00
|
|
|
value = FUSB300_EPPRD0_BTC(len) | FUSB300_EPPRD0_H |
|
2011-01-18 14:49:28 +08:00
|
|
|
FUSB300_EPPRD0_F | FUSB300_EPPRD0_L | FUSB300_EPPRD0_I;
|
|
|
|
iowrite32(value, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W0(ep->epnum));
|
|
|
|
|
|
|
|
iowrite32(0x0, ep->fusb300->reg + FUSB300_OFFSET_EPPRD_W2(ep->epnum));
|
|
|
|
|
|
|
|
fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_EPPRDRDY,
|
|
|
|
FUSB300_EPPRDR_EP_PRD_RDY(ep->epnum));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_wait_idma_finished(struct fusb300_ep *ep)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
do {
|
|
|
|
reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR1);
|
|
|
|
if ((reg & FUSB300_IGR1_VBUS_CHG_INT) ||
|
|
|
|
(reg & FUSB300_IGR1_WARM_RST_INT) ||
|
|
|
|
(reg & FUSB300_IGR1_HOT_RST_INT) ||
|
|
|
|
(reg & FUSB300_IGR1_USBRST_INT)
|
|
|
|
)
|
|
|
|
goto IDMA_RESET;
|
|
|
|
reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGR0);
|
|
|
|
reg &= FUSB300_IGR0_EPn_PRD_INT(ep->epnum);
|
|
|
|
} while (!reg);
|
|
|
|
|
|
|
|
fusb300_clear_int(ep->fusb300, FUSB300_OFFSET_IGR0,
|
|
|
|
FUSB300_IGR0_EPn_PRD_INT(ep->epnum));
|
2013-04-02 19:18:08 +08:00
|
|
|
return;
|
|
|
|
|
2011-01-18 14:49:28 +08:00
|
|
|
IDMA_RESET:
|
2013-04-02 19:18:08 +08:00
|
|
|
reg = ioread32(ep->fusb300->reg + FUSB300_OFFSET_IGER0);
|
|
|
|
reg &= ~FUSB300_IGER0_EEPn_PRD_INT(ep->epnum);
|
|
|
|
iowrite32(reg, ep->fusb300->reg + FUSB300_OFFSET_IGER0);
|
2011-01-18 14:49:28 +08:00
|
|
|
}
|
|
|
|
|
2013-04-02 19:18:08 +08:00
|
|
|
static void fusb300_set_idma(struct fusb300_ep *ep,
|
2011-01-18 14:49:28 +08:00
|
|
|
struct fusb300_request *req)
|
|
|
|
{
|
2013-01-28 23:08:28 +08:00
|
|
|
int ret;
|
2011-01-18 14:49:28 +08:00
|
|
|
|
2013-01-28 23:08:28 +08:00
|
|
|
ret = usb_gadget_map_request(&ep->fusb300->gadget,
|
|
|
|
&req->req, DMA_TO_DEVICE);
|
|
|
|
if (ret)
|
2011-07-05 20:59:05 +08:00
|
|
|
return;
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
fusb300_enable_bit(ep->fusb300, FUSB300_OFFSET_IGER0,
|
|
|
|
FUSB300_IGER0_EEPn_PRD_INT(ep->epnum));
|
|
|
|
|
2013-01-28 23:08:28 +08:00
|
|
|
fusb300_fill_idma_prdtbl(ep, req->req.dma, req->req.length);
|
2011-01-18 14:49:28 +08:00
|
|
|
/* check idma is done */
|
|
|
|
fusb300_wait_idma_finished(ep);
|
|
|
|
|
2013-01-28 23:08:28 +08:00
|
|
|
usb_gadget_unmap_request(&ep->fusb300->gadget,
|
|
|
|
&req->req, DMA_TO_DEVICE);
|
2011-01-18 14:49:28 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void in_ep_fifo_handler(struct fusb300_ep *ep)
|
|
|
|
{
|
|
|
|
struct fusb300_request *req = list_entry(ep->queue.next,
|
|
|
|
struct fusb300_request, queue);
|
|
|
|
|
2011-07-04 16:09:15 +08:00
|
|
|
if (req->req.length)
|
2011-01-18 14:49:28 +08:00
|
|
|
fusb300_set_idma(ep, req);
|
|
|
|
done(ep, req, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void out_ep_fifo_handler(struct fusb300_ep *ep)
|
|
|
|
{
|
|
|
|
struct fusb300 *fusb300 = ep->fusb300;
|
|
|
|
struct fusb300_request *req = list_entry(ep->queue.next,
|
|
|
|
struct fusb300_request, queue);
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_EPFFR(ep->epnum));
|
|
|
|
u32 length = reg & FUSB300_FFR_BYCNT;
|
|
|
|
|
|
|
|
fusb300_rdfifo(ep, req, length);
|
|
|
|
|
|
|
|
/* finish out transfer */
|
|
|
|
if ((req->req.length == req->req.actual) || (length < ep->ep.maxpacket))
|
|
|
|
done(ep, req, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void check_device_mode(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
u32 reg = ioread32(fusb300->reg + FUSB300_OFFSET_GCR);
|
|
|
|
|
|
|
|
switch (reg & FUSB300_GCR_DEVEN_MSK) {
|
|
|
|
case FUSB300_GCR_DEVEN_SS:
|
|
|
|
fusb300->gadget.speed = USB_SPEED_SUPER;
|
|
|
|
break;
|
|
|
|
case FUSB300_GCR_DEVEN_HS:
|
|
|
|
fusb300->gadget.speed = USB_SPEED_HIGH;
|
|
|
|
break;
|
|
|
|
case FUSB300_GCR_DEVEN_FS:
|
|
|
|
fusb300->gadget.speed = USB_SPEED_FULL;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
fusb300->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
printk(KERN_INFO "dev_mode = %d\n", (reg & FUSB300_GCR_DEVEN_MSK));
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void fusb300_ep0out(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
struct fusb300_ep *ep = fusb300->ep[0];
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
if (!list_empty(&ep->queue)) {
|
|
|
|
struct fusb300_request *req;
|
|
|
|
|
|
|
|
req = list_first_entry(&ep->queue,
|
|
|
|
struct fusb300_request, queue);
|
|
|
|
if (req->req.length)
|
|
|
|
fusb300_rdcxf(ep->fusb300, req->req.buf,
|
|
|
|
req->req.length);
|
|
|
|
done(ep, req, 0);
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
|
|
|
|
reg &= ~FUSB300_IGER1_CX_OUT_INT;
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_IGER1);
|
|
|
|
} else
|
|
|
|
pr_err("%s : empty queue\n", __func__);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_ep0in(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
struct fusb300_request *req;
|
|
|
|
struct fusb300_ep *ep = fusb300->ep[0];
|
|
|
|
|
|
|
|
if ((!list_empty(&ep->queue)) && (fusb300->ep0_dir)) {
|
|
|
|
req = list_entry(ep->queue.next,
|
|
|
|
struct fusb300_request, queue);
|
|
|
|
if (req->req.length)
|
|
|
|
fusb300_wrcxf(ep, req);
|
|
|
|
if ((req->req.length - req->req.actual) < ep->ep.maxpacket)
|
|
|
|
done(ep, req, 0);
|
|
|
|
} else
|
|
|
|
fusb300_set_cxdone(fusb300);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_grp2_handler(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_grp3_handler(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_grp4_handler(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_grp5_handler(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t fusb300_irq(int irq, void *_fusb300)
|
|
|
|
{
|
|
|
|
struct fusb300 *fusb300 = _fusb300;
|
|
|
|
u32 int_grp1 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR1);
|
|
|
|
u32 int_grp1_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER1);
|
|
|
|
u32 int_grp0 = ioread32(fusb300->reg + FUSB300_OFFSET_IGR0);
|
|
|
|
u32 int_grp0_en = ioread32(fusb300->reg + FUSB300_OFFSET_IGER0);
|
|
|
|
struct usb_ctrlrequest ctrl;
|
|
|
|
u8 in;
|
|
|
|
u32 reg;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
spin_lock(&fusb300->lock);
|
|
|
|
|
|
|
|
int_grp1 &= int_grp1_en;
|
|
|
|
int_grp0 &= int_grp0_en;
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_WARM_RST_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_WARM_RST_INT);
|
|
|
|
printk(KERN_INFO"fusb300_warmreset\n");
|
|
|
|
fusb300_reset();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_HOT_RST_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_HOT_RST_INT);
|
|
|
|
printk(KERN_INFO"fusb300_hotreset\n");
|
|
|
|
fusb300_reset();
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_USBRST_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_USBRST_INT);
|
|
|
|
fusb300_reset();
|
|
|
|
}
|
|
|
|
/* COMABT_INT has a highest priority */
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_CX_COMABT_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_CX_COMABT_INT);
|
|
|
|
printk(KERN_INFO"fusb300_ep0abt\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_VBUS_CHG_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_VBUS_CHG_INT);
|
|
|
|
printk(KERN_INFO"fusb300_vbus_change\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U3_EXIT_FAIL_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U3_EXIT_FAIL_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U2_EXIT_FAIL_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U2_EXIT_FAIL_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U1_EXIT_FAIL_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U1_EXIT_FAIL_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U2_ENTRY_FAIL_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U2_ENTRY_FAIL_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U1_ENTRY_FAIL_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U1_ENTRY_FAIL_INT);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U3_EXIT_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U3_EXIT_INT);
|
|
|
|
printk(KERN_INFO "FUSB300_IGR1_U3_EXIT_INT\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U2_EXIT_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U2_EXIT_INT);
|
|
|
|
printk(KERN_INFO "FUSB300_IGR1_U2_EXIT_INT\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U1_EXIT_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U1_EXIT_INT);
|
|
|
|
printk(KERN_INFO "FUSB300_IGR1_U1_EXIT_INT\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U3_ENTRY_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U3_ENTRY_INT);
|
|
|
|
printk(KERN_INFO "FUSB300_IGR1_U3_ENTRY_INT\n");
|
|
|
|
fusb300_enable_bit(fusb300, FUSB300_OFFSET_SSCR1,
|
|
|
|
FUSB300_SSCR1_GO_U3_DONE);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U2_ENTRY_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U2_ENTRY_INT);
|
|
|
|
printk(KERN_INFO "FUSB300_IGR1_U2_ENTRY_INT\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_U1_ENTRY_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_U1_ENTRY_INT);
|
|
|
|
printk(KERN_INFO "FUSB300_IGR1_U1_ENTRY_INT\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_RESM_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_RESM_INT);
|
|
|
|
printk(KERN_INFO "fusb300_resume\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_SUSP_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_SUSP_INT);
|
|
|
|
printk(KERN_INFO "fusb300_suspend\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_HS_LPM_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_HS_LPM_INT);
|
|
|
|
printk(KERN_INFO "fusb300_HS_LPM_INT\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_DEV_MODE_CHG_INT) {
|
|
|
|
fusb300_clear_int(fusb300, FUSB300_OFFSET_IGR1,
|
|
|
|
FUSB300_IGR1_DEV_MODE_CHG_INT);
|
|
|
|
check_device_mode(fusb300);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_CX_COMFAIL_INT) {
|
|
|
|
fusb300_set_cxstall(fusb300);
|
|
|
|
printk(KERN_INFO "fusb300_ep0fail\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_CX_SETUP_INT) {
|
|
|
|
printk(KERN_INFO "fusb300_ep0setup\n");
|
|
|
|
if (setup_packet(fusb300, &ctrl)) {
|
|
|
|
spin_unlock(&fusb300->lock);
|
|
|
|
if (fusb300->driver->setup(&fusb300->gadget, &ctrl) < 0)
|
|
|
|
fusb300_set_cxstall(fusb300);
|
|
|
|
spin_lock(&fusb300->lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_CX_CMDEND_INT)
|
|
|
|
printk(KERN_INFO "fusb300_cmdend\n");
|
|
|
|
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_CX_OUT_INT) {
|
|
|
|
printk(KERN_INFO "fusb300_cxout\n");
|
|
|
|
fusb300_ep0out(fusb300);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_CX_IN_INT) {
|
|
|
|
printk(KERN_INFO "fusb300_cxin\n");
|
|
|
|
fusb300_ep0in(fusb300);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_INTGRP5)
|
|
|
|
fusb300_grp5_handler();
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_INTGRP4)
|
|
|
|
fusb300_grp4_handler();
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_INTGRP3)
|
|
|
|
fusb300_grp3_handler();
|
|
|
|
|
|
|
|
if (int_grp1 & FUSB300_IGR1_INTGRP2)
|
|
|
|
fusb300_grp2_handler();
|
|
|
|
|
|
|
|
if (int_grp0) {
|
|
|
|
for (i = 1; i < FUSB300_MAX_NUM_EP; i++) {
|
|
|
|
if (int_grp0 & FUSB300_IGR0_EPn_FIFO_INT(i)) {
|
|
|
|
reg = ioread32(fusb300->reg +
|
|
|
|
FUSB300_OFFSET_EPSET1(i));
|
|
|
|
in = (reg & FUSB300_EPSET1_DIRIN) ? 1 : 0;
|
|
|
|
if (in)
|
|
|
|
in_ep_fifo_handler(fusb300->ep[i]);
|
|
|
|
else
|
|
|
|
out_ep_fifo_handler(fusb300->ep[i]);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_unlock(&fusb300->lock);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_u2_timeout(struct fusb300 *fusb300,
|
|
|
|
u32 time)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
|
|
|
|
reg &= ~0xff;
|
|
|
|
reg |= FUSB300_SSCR2_U2TIMEOUT(time);
|
|
|
|
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void fusb300_set_u1_timeout(struct fusb300 *fusb300,
|
|
|
|
u32 time)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_TT);
|
|
|
|
reg &= ~(0xff << 8);
|
|
|
|
reg |= FUSB300_SSCR2_U1TIMEOUT(time);
|
|
|
|
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_TT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void init_controller(struct fusb300 *fusb300)
|
|
|
|
{
|
|
|
|
u32 reg;
|
|
|
|
u32 mask = 0;
|
|
|
|
u32 val = 0;
|
|
|
|
|
|
|
|
/* split on */
|
|
|
|
mask = val = FUSB300_AHBBCR_S0_SPLIT_ON | FUSB300_AHBBCR_S1_SPLIT_ON;
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_AHBCR);
|
|
|
|
reg &= ~mask;
|
|
|
|
reg |= val;
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_AHBCR);
|
|
|
|
|
|
|
|
/* enable high-speed LPM */
|
|
|
|
mask = val = FUSB300_HSCR_HS_LPM_PERMIT;
|
|
|
|
reg = ioread32(fusb300->reg + FUSB300_OFFSET_HSCR);
|
|
|
|
reg &= ~mask;
|
|
|
|
reg |= val;
|
|
|
|
iowrite32(reg, fusb300->reg + FUSB300_OFFSET_HSCR);
|
|
|
|
|
|
|
|
/*set u1 u2 timmer*/
|
|
|
|
fusb300_set_u2_timeout(fusb300, 0xff);
|
|
|
|
fusb300_set_u1_timeout(fusb300, 0xff);
|
|
|
|
|
|
|
|
/* enable all grp1 interrupt */
|
|
|
|
iowrite32(0xcfffff9f, fusb300->reg + FUSB300_OFFSET_IGER1);
|
|
|
|
}
|
|
|
|
/*------------------------------------------------------------------------*/
|
2013-01-24 16:36:33 +08:00
|
|
|
static int fusb300_udc_start(struct usb_gadget *g,
|
|
|
|
struct usb_gadget_driver *driver)
|
2011-01-18 14:49:28 +08:00
|
|
|
{
|
2013-01-24 16:36:33 +08:00
|
|
|
struct fusb300 *fusb300 = to_fusb300(g);
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
/* hook up the driver */
|
|
|
|
driver->driver.bus = NULL;
|
|
|
|
fusb300->driver = driver;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-10-18 01:05:12 +08:00
|
|
|
static int fusb300_udc_stop(struct usb_gadget *g)
|
2011-01-18 14:49:28 +08:00
|
|
|
{
|
2013-01-24 16:36:33 +08:00
|
|
|
struct fusb300 *fusb300 = to_fusb300(g);
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
init_controller(fusb300);
|
|
|
|
fusb300->driver = NULL;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
static int fusb300_udc_pullup(struct usb_gadget *_gadget, int is_active)
|
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-01-24 23:58:16 +08:00
|
|
|
static const struct usb_gadget_ops fusb300_gadget_ops = {
|
2011-01-18 14:49:28 +08:00
|
|
|
.pullup = fusb300_udc_pullup,
|
2013-01-24 16:36:33 +08:00
|
|
|
.udc_start = fusb300_udc_start,
|
|
|
|
.udc_stop = fusb300_udc_stop,
|
2011-01-18 14:49:28 +08:00
|
|
|
};
|
|
|
|
|
2015-04-11 06:14:21 +08:00
|
|
|
static int fusb300_remove(struct platform_device *pdev)
|
2011-01-18 14:49:28 +08:00
|
|
|
{
|
2013-05-23 18:19:22 +08:00
|
|
|
struct fusb300 *fusb300 = platform_get_drvdata(pdev);
|
2019-05-28 20:17:54 +08:00
|
|
|
int i;
|
2011-01-18 14:49:28 +08:00
|
|
|
|
2011-06-28 21:33:47 +08:00
|
|
|
usb_del_gadget_udc(&fusb300->gadget);
|
2011-01-18 14:49:28 +08:00
|
|
|
iounmap(fusb300->reg);
|
|
|
|
free_irq(platform_get_irq(pdev, 0), fusb300);
|
|
|
|
|
|
|
|
fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
|
2019-05-28 20:17:54 +08:00
|
|
|
for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
|
|
|
|
kfree(fusb300->ep[i]);
|
2011-01-18 14:49:28 +08:00
|
|
|
kfree(fusb300);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2014-05-18 15:19:06 +08:00
|
|
|
static int fusb300_probe(struct platform_device *pdev)
|
2011-01-18 14:49:28 +08:00
|
|
|
{
|
|
|
|
struct resource *res, *ires, *ires1;
|
|
|
|
void __iomem *reg = NULL;
|
|
|
|
struct fusb300 *fusb300 = NULL;
|
|
|
|
struct fusb300_ep *_ep[FUSB300_MAX_NUM_EP];
|
|
|
|
int ret = 0;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res) {
|
|
|
|
ret = -ENODEV;
|
|
|
|
pr_err("platform_get_resource error.\n");
|
|
|
|
goto clean_up;
|
|
|
|
}
|
|
|
|
|
|
|
|
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
|
|
if (!ires) {
|
|
|
|
ret = -ENODEV;
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"platform_get_resource IORESOURCE_IRQ error.\n");
|
|
|
|
goto clean_up;
|
|
|
|
}
|
|
|
|
|
|
|
|
ires1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
|
|
|
|
if (!ires1) {
|
|
|
|
ret = -ENODEV;
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"platform_get_resource IORESOURCE_IRQ 1 error.\n");
|
|
|
|
goto clean_up;
|
|
|
|
}
|
|
|
|
|
|
|
|
reg = ioremap(res->start, resource_size(res));
|
|
|
|
if (reg == NULL) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
pr_err("ioremap error.\n");
|
|
|
|
goto clean_up;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* initialize udc */
|
|
|
|
fusb300 = kzalloc(sizeof(struct fusb300), GFP_KERNEL);
|
2014-08-08 04:57:47 +08:00
|
|
|
if (fusb300 == NULL) {
|
|
|
|
ret = -ENOMEM;
|
2011-01-18 14:49:28 +08:00
|
|
|
goto clean_up;
|
2014-08-08 04:57:47 +08:00
|
|
|
}
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
for (i = 0; i < FUSB300_MAX_NUM_EP; i++) {
|
|
|
|
_ep[i] = kzalloc(sizeof(struct fusb300_ep), GFP_KERNEL);
|
2014-08-08 04:57:47 +08:00
|
|
|
if (_ep[i] == NULL) {
|
|
|
|
ret = -ENOMEM;
|
2011-01-18 14:49:28 +08:00
|
|
|
goto clean_up;
|
2014-08-08 04:57:47 +08:00
|
|
|
}
|
2011-01-18 14:49:28 +08:00
|
|
|
fusb300->ep[i] = _ep[i];
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_init(&fusb300->lock);
|
|
|
|
|
2013-05-23 18:19:22 +08:00
|
|
|
platform_set_drvdata(pdev, fusb300);
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
fusb300->gadget.ops = &fusb300_gadget_ops;
|
|
|
|
|
2011-11-20 01:27:37 +08:00
|
|
|
fusb300->gadget.max_speed = USB_SPEED_HIGH;
|
2011-01-18 14:49:28 +08:00
|
|
|
fusb300->gadget.name = udc_name;
|
|
|
|
fusb300->reg = reg;
|
|
|
|
|
2011-09-07 16:10:52 +08:00
|
|
|
ret = request_irq(ires->start, fusb300_irq, IRQF_SHARED,
|
2011-01-18 14:49:28 +08:00
|
|
|
udc_name, fusb300);
|
|
|
|
if (ret < 0) {
|
|
|
|
pr_err("request_irq error (%d)\n", ret);
|
|
|
|
goto clean_up;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = request_irq(ires1->start, fusb300_irq,
|
2011-09-07 16:10:52 +08:00
|
|
|
IRQF_SHARED, udc_name, fusb300);
|
2011-01-18 14:49:28 +08:00
|
|
|
if (ret < 0) {
|
|
|
|
pr_err("request_irq1 error (%d)\n", ret);
|
|
|
|
goto clean_up;
|
|
|
|
}
|
|
|
|
|
|
|
|
INIT_LIST_HEAD(&fusb300->gadget.ep_list);
|
|
|
|
|
|
|
|
for (i = 0; i < FUSB300_MAX_NUM_EP ; i++) {
|
|
|
|
struct fusb300_ep *ep = fusb300->ep[i];
|
|
|
|
|
|
|
|
if (i != 0) {
|
|
|
|
INIT_LIST_HEAD(&fusb300->ep[i]->ep.ep_list);
|
|
|
|
list_add_tail(&fusb300->ep[i]->ep.ep_list,
|
|
|
|
&fusb300->gadget.ep_list);
|
|
|
|
}
|
|
|
|
ep->fusb300 = fusb300;
|
|
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
|
|
ep->ep.name = fusb300_ep_name[i];
|
|
|
|
ep->ep.ops = &fusb300_ep_ops;
|
2013-12-13 19:23:38 +08:00
|
|
|
usb_ep_set_maxpacket_limit(&ep->ep, HS_BULK_MAX_PACKET_SIZE);
|
2015-07-31 22:00:28 +08:00
|
|
|
|
|
|
|
if (i == 0) {
|
|
|
|
ep->ep.caps.type_control = true;
|
|
|
|
} else {
|
|
|
|
ep->ep.caps.type_iso = true;
|
|
|
|
ep->ep.caps.type_bulk = true;
|
|
|
|
ep->ep.caps.type_int = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
ep->ep.caps.dir_in = true;
|
|
|
|
ep->ep.caps.dir_out = true;
|
2011-01-18 14:49:28 +08:00
|
|
|
}
|
2013-12-13 19:23:38 +08:00
|
|
|
usb_ep_set_maxpacket_limit(&fusb300->ep[0]->ep, HS_CTL_MAX_PACKET_SIZE);
|
2011-01-18 14:49:28 +08:00
|
|
|
fusb300->ep[0]->epnum = 0;
|
|
|
|
fusb300->gadget.ep0 = &fusb300->ep[0]->ep;
|
|
|
|
INIT_LIST_HEAD(&fusb300->gadget.ep0->ep_list);
|
|
|
|
|
|
|
|
fusb300->ep0_req = fusb300_alloc_request(&fusb300->ep[0]->ep,
|
|
|
|
GFP_KERNEL);
|
2013-05-07 19:49:37 +08:00
|
|
|
if (fusb300->ep0_req == NULL) {
|
|
|
|
ret = -ENOMEM;
|
2011-01-18 14:49:28 +08:00
|
|
|
goto clean_up3;
|
2013-05-07 19:49:37 +08:00
|
|
|
}
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
init_controller(fusb300);
|
2011-06-28 21:33:47 +08:00
|
|
|
ret = usb_add_gadget_udc(&pdev->dev, &fusb300->gadget);
|
|
|
|
if (ret)
|
|
|
|
goto err_add_udc;
|
|
|
|
|
2011-01-18 14:49:28 +08:00
|
|
|
dev_info(&pdev->dev, "version %s\n", DRIVER_VERSION);
|
|
|
|
|
|
|
|
return 0;
|
2013-01-24 16:36:33 +08:00
|
|
|
|
2011-06-28 21:33:47 +08:00
|
|
|
err_add_udc:
|
|
|
|
fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
|
2011-01-18 14:49:28 +08:00
|
|
|
|
|
|
|
clean_up3:
|
|
|
|
free_irq(ires->start, fusb300);
|
|
|
|
|
|
|
|
clean_up:
|
|
|
|
if (fusb300) {
|
|
|
|
if (fusb300->ep0_req)
|
|
|
|
fusb300_free_request(&fusb300->ep[0]->ep,
|
|
|
|
fusb300->ep0_req);
|
2019-05-28 20:17:54 +08:00
|
|
|
for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
|
|
|
|
kfree(fusb300->ep[i]);
|
2011-01-18 14:49:28 +08:00
|
|
|
kfree(fusb300);
|
|
|
|
}
|
|
|
|
if (reg)
|
|
|
|
iounmap(reg);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver fusb300_driver = {
|
2015-04-11 06:14:21 +08:00
|
|
|
.remove = fusb300_remove,
|
2011-01-18 14:49:28 +08:00
|
|
|
.driver = {
|
|
|
|
.name = (char *) udc_name,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2013-01-09 19:15:28 +08:00
|
|
|
module_platform_driver_probe(fusb300_driver, fusb300_probe);
|