linux/drivers/acpi/acpica/actables.h

156 lines
4.9 KiB
C
Raw Normal View History

/******************************************************************************
*
* Name: actables.h - ACPI table management
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2014, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#ifndef __ACTABLES_H__
#define __ACTABLES_H__
acpi_status acpi_allocate_root_table(u32 initial_table_count);
/*
* tbxfroot - Root pointer utilities
*/
acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp);
u8 *acpi_tb_scan_memory_for_rsdp(u8 *start_address, u32 length);
/*
* tbfadt - FADT parse/convert/validate
*/
void acpi_tb_parse_fadt(u32 table_index);
void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length);
/*
* tbfind - find ACPI table
*/
acpi_status
acpi_tb_find_table(char *signature,
char *oem_id, char *oem_table_id, u32 *table_index);
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 10:49:35 +08:00
/*
* tbinstal - Table removal and deletion
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 10:49:35 +08:00
*/
acpi_status acpi_tb_resize_root_table_list(void);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
acpi_status acpi_tb_validate_table(struct acpi_table_desc *table_desc);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
void acpi_tb_invalidate_table(struct acpi_table_desc *table_desc);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_status
acpi_tb_verify_table(struct acpi_table_desc *table_desc, char *signature);
void acpi_tb_override_table(struct acpi_table_desc *old_table_desc);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
acpi_status
acpi_tb_acquire_table(struct acpi_table_desc *table_desc,
struct acpi_table_header **table_ptr,
u32 *table_length, u8 *table_flags);
void
acpi_tb_release_table(struct acpi_table_header *table,
u32 table_length, u8 table_flags);
acpi_status
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_tb_install_non_fixed_table(acpi_physical_address address,
u8 flags,
u8 reload, u8 override, u32 *table_index);
acpi_status
acpi_tb_store_table(acpi_physical_address address,
struct acpi_table_header *table,
u32 length, u8 flags, u32 *table_index);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
void acpi_tb_uninstall_table(struct acpi_table_desc *table_desc);
void acpi_tb_terminate(void);
acpi_status acpi_tb_delete_namespace_by_owner(u32 table_index);
acpi_status acpi_tb_allocate_owner_id(u32 table_index);
acpi_status acpi_tb_release_owner_id(u32 table_index);
acpi_status acpi_tb_get_owner_id(u32 table_index, acpi_owner_id *owner_id);
u8 acpi_tb_is_table_loaded(u32 table_index);
ACPICA 20050708 from Bob Moore <robert.moore@intel.com> The use of the CPU stack in the debug version of the subsystem has been considerably reduced. Previously, a debug structure was declared in every function that used the debug macros. This structure has been removed in favor of declaring the individual elements as parameters to the debug functions. This reduces the cumulative stack use during nested execution of ACPI function calls at the cost of a small increase in the code size of the debug version of the subsystem. With assistance from Alexey Starikovskiy and Len Brown. Added the ACPI_GET_FUNCTION_NAME macro to enable the compiler-dependent headers to define a macro that will return the current function name at runtime (such as __FUNCTION__ or _func_, etc.) The function name is used by the debug trace output. If ACPI_GET_FUNCTION_NAME is not defined in the compiler-dependent header, the function name is saved on the CPU stack (one pointer per function.) This mechanism is used because apparently there exists no standard ANSI-C defined macro that that returns the function name. Alexey Starikovskiy redesigned and reimplemented the "Owner ID" mechanism used to track namespace objects created/deleted by ACPI tables and control method execution. A bitmap is now used to allocate and free the IDs, thus solving the wraparound problem present in the previous implementation. The size of the namespace node descriptor was reduced by 2 bytes as a result. Removed the UINT32_BIT and UINT16_BIT types that were used for the bitfield flag definitions within the headers for the predefined ACPI tables. These have been replaced by UINT8_BIT in order to increase the code portability of the subsystem. If the use of UINT8 remains a problem, we may be forced to eliminate bitfields entirely because of a lack of portability. Alexey Starikovksiy enhanced the performance of acpi_ut_update_object_reference. This is a frequently used function and this improvement increases the performance of the entire subsystem. Alexey Starikovskiy fixed several possible memory leaks and the inverse - premature object deletion. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-08 12:00:00 +08:00
void acpi_tb_set_table_loaded_flag(u32 table_index, u8 is_loaded);
/*
* tbutils - table manager utilities
*/
acpi_status acpi_tb_initialize_facs(void);
u8 acpi_tb_tables_loaded(void);
void
acpi_tb_print_table_header(acpi_physical_address address,
struct acpi_table_header *header);
u8 acpi_tb_checksum(u8 *buffer, u32 length);
acpi_status
acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length);
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
void acpi_tb_check_dsdt_header(void);
struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index);
void
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_tb_install_table(struct acpi_table_desc *table_desc,
acpi_physical_address address,
u8 flags, struct acpi_table_header *table);
void
acpi_tb_install_and_override_table(u32 table_index,
struct acpi_table_desc *new_table_desc,
u8 override);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_status
acpi_tb_install_fixed_table(acpi_physical_address address,
char *signature, u32 table_index);
acpi_status acpi_tb_parse_root_table(acpi_physical_address rsdp_address);
ACPI: ACPICA 20060331 Implemented header file support for the following additional ACPI tables: ASF!, BOOT, CPEP, DBGP, MCFG, SPCR, SPMI, TCPA, and WDRT. With this support, all current and known ACPI tables are now defined in the ACPICA headers and are available for use by device drivers and other software. Implemented support to allow tables that contain ACPI names with invalid characters to be loaded. Previously, this would cause the table load to fail, but since there are several known cases of such tables on existing machines, this change was made to enable ACPI support for them. Also, this matches the behavior of the Microsoft ACPI implementation. https://bugzilla.novell.com/show_bug.cgi?id=147621 Fixed a couple regressions introduced during the memory optimization in the 20060317 release. The namespace node definition required additional reorganization and an internal datatype that had been changed to 8-bit was restored to 32-bit. (Valery Podrezov) Fixed a problem where a null pointer passed to acpi_ut_delete_generic_state() could be passed through to acpi_os_release_object which is unexpected. Such null pointers are now trapped and ignored, matching the behavior of the previous implementation before the deployment of acpi_os_release_object(). (Valery Podrezov, Fiodor Suietov) Fixed a memory mapping leak during the deletion of a SystemMemory operation region where a cached memory mapping was not deleted. This became a noticeable problem for operation regions that are defined within frequently used control methods. (Dana Meyers) Reorganized the ACPI table header files into two main files: one for the ACPI tables consumed by the ACPICA core, and another for the miscellaneous ACPI tables that are consumed by the drivers and other software. The various FADT definitions were merged into one common section and three different tables (ACPI 1.0, 1.0+, and 2.0) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-03-31 13:00:00 +08:00
#endif /* __ACTABLES_H__ */