linux/sound/usb/line6/playback.c

443 lines
11 KiB
C
Raw Normal View History

/*
* Line 6 Linux USB driver
*
* Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation, version 2.
*
*/
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include "capture.h"
#include "driver.h"
#include "pcm.h"
#include "playback.h"
/*
Software stereo volume control.
*/
static void change_volume(struct urb *urb_out, int volume[],
int bytes_per_frame)
{
int chn = 0;
if (volume[0] == 256 && volume[1] == 256)
return; /* maximum volume - no change */
if (bytes_per_frame == 4) {
__le16 *p, *buf_end;
p = (__le16 *)urb_out->transfer_buffer;
buf_end = p + urb_out->transfer_buffer_length / sizeof(*p);
for (; p < buf_end; ++p) {
short pv = le16_to_cpu(*p);
int val = (pv * volume[chn & 1]) >> 8;
pv = clamp(val, -0x8000, 0x7fff);
*p = cpu_to_le16(pv);
++chn;
}
} else if (bytes_per_frame == 6) {
unsigned char *p, *buf_end;
p = (unsigned char *)urb_out->transfer_buffer;
buf_end = p + urb_out->transfer_buffer_length;
for (; p < buf_end; p += 3) {
int val;
val = p[0] + (p[1] << 8) + ((signed char)p[2] << 16);
val = (val * volume[chn & 1]) >> 8;
val = clamp(val, -0x800000, 0x7fffff);
p[0] = val;
p[1] = val >> 8;
p[2] = val >> 16;
++chn;
}
}
}
/*
Create signal for impulse response test.
*/
static void create_impulse_test_signal(struct snd_line6_pcm *line6pcm,
struct urb *urb_out, int bytes_per_frame)
{
int frames = urb_out->transfer_buffer_length / bytes_per_frame;
if (bytes_per_frame == 4) {
int i;
short *pi = (short *)line6pcm->prev_fbuf;
short *po = (short *)urb_out->transfer_buffer;
for (i = 0; i < frames; ++i) {
po[0] = pi[0];
po[1] = 0;
pi += 2;
po += 2;
}
} else if (bytes_per_frame == 6) {
int i, j;
unsigned char *pi = line6pcm->prev_fbuf;
unsigned char *po = urb_out->transfer_buffer;
for (i = 0; i < frames; ++i) {
for (j = 0; j < bytes_per_frame / 2; ++j)
po[j] = pi[j];
for (; j < bytes_per_frame; ++j)
po[j] = 0;
pi += bytes_per_frame;
po += bytes_per_frame;
}
}
if (--line6pcm->impulse_count <= 0) {
((unsigned char *)(urb_out->transfer_buffer))[bytes_per_frame -
1] =
line6pcm->impulse_volume;
line6pcm->impulse_count = line6pcm->impulse_period;
}
}
/*
Add signal to buffer for software monitoring.
*/
static void add_monitor_signal(struct urb *urb_out, unsigned char *signal,
int volume, int bytes_per_frame)
{
if (volume == 0)
return; /* zero volume - no change */
if (bytes_per_frame == 4) {
__le16 *pi, *po, *buf_end;
pi = (__le16 *)signal;
po = (__le16 *)urb_out->transfer_buffer;
buf_end = po + urb_out->transfer_buffer_length / sizeof(*po);
for (; po < buf_end; ++pi, ++po) {
short pov = le16_to_cpu(*po);
short piv = le16_to_cpu(*pi);
int val = pov + ((piv * volume) >> 8);
pov = clamp(val, -0x8000, 0x7fff);
*po = cpu_to_le16(pov);
}
}
/*
We don't need to handle devices with 6 bytes per frame here
since they all support hardware monitoring.
*/
}
/*
Find a free URB, prepare audio data, and submit URB.
must be called in line6pcm->out.lock context
*/
static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
{
int index;
int i, urb_size, urb_frames;
int ret;
const int bytes_per_frame =
line6pcm->properties->bytes_per_channel *
line6pcm->properties->playback_hw.channels_max;
const int frame_increment =
line6pcm->properties->rates.rats[0].num_min;
const int frame_factor =
line6pcm->properties->rates.rats[0].den *
(line6pcm->line6->intervals_per_second / LINE6_ISO_INTERVAL);
struct urb *urb_out;
index = find_first_zero_bit(&line6pcm->out.active_urbs,
line6pcm->line6->iso_buffers);
if (index < 0 || index >= line6pcm->line6->iso_buffers) {
dev_err(line6pcm->line6->ifcdev, "no free URB found\n");
return -EINVAL;
}
urb_out = line6pcm->out.urbs[index];
urb_size = 0;
/* TODO: this may not work for LINE6_ISO_PACKETS != 1 */
for (i = 0; i < LINE6_ISO_PACKETS; ++i) {
/* compute frame size for given sampling rate */
int fsize = 0;
struct usb_iso_packet_descriptor *fout =
&urb_out->iso_frame_desc[i];
fsize = line6pcm->prev_fsize;
if (fsize == 0) {
int n;
line6pcm->out.count += frame_increment;
n = line6pcm->out.count / frame_factor;
line6pcm->out.count -= n * frame_factor;
fsize = n;
}
fsize *= bytes_per_frame;
fout->offset = urb_size;
fout->length = fsize;
urb_size += fsize;
}
if (urb_size == 0) {
/* can't determine URB size */
dev_err(line6pcm->line6->ifcdev, "driver bug: urb_size = 0\n");
return -EINVAL;
}
urb_frames = urb_size / bytes_per_frame;
urb_out->transfer_buffer =
line6pcm->out.buffer +
index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_out;
urb_out->transfer_buffer_length = urb_size;
urb_out->context = line6pcm;
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running) &&
!test_bit(LINE6_FLAG_PAUSE_PLAYBACK, &line6pcm->flags)) {
struct snd_pcm_runtime *runtime =
get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK)->runtime;
if (line6pcm->out.pos + urb_frames > runtime->buffer_size) {
/*
The transferred area goes over buffer boundary,
copy the data to the temp buffer.
*/
int len;
len = runtime->buffer_size - line6pcm->out.pos;
if (len > 0) {
memcpy(urb_out->transfer_buffer,
runtime->dma_area +
line6pcm->out.pos * bytes_per_frame,
len * bytes_per_frame);
memcpy(urb_out->transfer_buffer +
len * bytes_per_frame, runtime->dma_area,
(urb_frames - len) * bytes_per_frame);
} else
dev_err(line6pcm->line6->ifcdev, "driver bug: len = %d\n",
len);
} else {
memcpy(urb_out->transfer_buffer,
runtime->dma_area +
line6pcm->out.pos * bytes_per_frame,
urb_out->transfer_buffer_length);
}
line6pcm->out.pos += urb_frames;
if (line6pcm->out.pos >= runtime->buffer_size)
line6pcm->out.pos -= runtime->buffer_size;
change_volume(urb_out, line6pcm->volume_playback,
bytes_per_frame);
} else {
memset(urb_out->transfer_buffer, 0,
urb_out->transfer_buffer_length);
}
spin_lock_nested(&line6pcm->in.lock, SINGLE_DEPTH_NESTING);
if (line6pcm->prev_fbuf) {
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
if (test_bit(LINE6_STREAM_IMPULSE, &line6pcm->out.running)) {
create_impulse_test_signal(line6pcm, urb_out,
bytes_per_frame);
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
if (test_bit(LINE6_STREAM_PCM, &line6pcm->in.running)) {
line6_capture_copy(line6pcm,
urb_out->transfer_buffer,
urb_out->
transfer_buffer_length);
line6_capture_check_period(line6pcm,
urb_out->transfer_buffer_length);
}
} else {
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
if (!(line6pcm->line6->properties->capabilities & LINE6_CAP_HWMON)
&& line6pcm->out.running && line6pcm->in.running)
add_monitor_signal(urb_out, line6pcm->prev_fbuf,
line6pcm->volume_monitor,
bytes_per_frame);
}
line6pcm->prev_fbuf = NULL;
line6pcm->prev_fsize = 0;
}
spin_unlock(&line6pcm->in.lock);
ret = usb_submit_urb(urb_out, GFP_ATOMIC);
if (ret == 0)
set_bit(index, &line6pcm->out.active_urbs);
else
dev_err(line6pcm->line6->ifcdev,
"URB out #%d submission failed (%d)\n", index, ret);
return 0;
}
/*
Submit all currently available playback URBs.
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
must be called in line6pcm->out.lock context
*/
int line6_submit_audio_out_all_urbs(struct snd_line6_pcm *line6pcm)
{
int ret = 0, i;
for (i = 0; i < line6pcm->line6->iso_buffers; ++i) {
ret = submit_audio_out_urb(line6pcm);
if (ret < 0)
break;
}
return ret;
}
/*
Callback for completed playback URB.
*/
static void audio_out_callback(struct urb *urb)
{
int i, index, length = 0, shutdown = 0;
unsigned long flags;
struct snd_line6_pcm *line6pcm = (struct snd_line6_pcm *)urb->context;
struct snd_pcm_substream *substream =
get_substream(line6pcm, SNDRV_PCM_STREAM_PLAYBACK);
const int bytes_per_frame =
line6pcm->properties->bytes_per_channel *
line6pcm->properties->playback_hw.channels_max;
#if USE_CLEAR_BUFFER_WORKAROUND
memset(urb->transfer_buffer, 0, urb->transfer_buffer_length);
#endif
line6pcm->out.last_frame = urb->start_frame;
/* find index of URB */
for (index = 0; index < line6pcm->line6->iso_buffers; index++)
if (urb == line6pcm->out.urbs[index])
break;
if (index >= line6pcm->line6->iso_buffers)
return; /* URB has been unlinked asynchronously */
for (i = 0; i < LINE6_ISO_PACKETS; i++)
length += urb->iso_frame_desc[i].length;
spin_lock_irqsave(&line6pcm->out.lock, flags);
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running)) {
struct snd_pcm_runtime *runtime = substream->runtime;
line6pcm->out.pos_done +=
length / bytes_per_frame;
if (line6pcm->out.pos_done >= runtime->buffer_size)
line6pcm->out.pos_done -= runtime->buffer_size;
}
clear_bit(index, &line6pcm->out.active_urbs);
for (i = 0; i < LINE6_ISO_PACKETS; i++)
if (urb->iso_frame_desc[i].status == -EXDEV) {
shutdown = 1;
break;
}
if (test_and_clear_bit(index, &line6pcm->out.unlink_urbs))
shutdown = 1;
if (!shutdown) {
submit_audio_out_urb(line6pcm);
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
if (test_bit(LINE6_STREAM_PCM, &line6pcm->out.running)) {
line6pcm->out.bytes += length;
if (line6pcm->out.bytes >= line6pcm->out.period) {
line6pcm->out.bytes %= line6pcm->out.period;
spin_unlock(&line6pcm->out.lock);
snd_pcm_period_elapsed(substream);
spin_lock(&line6pcm->out.lock);
}
}
}
spin_unlock_irqrestore(&line6pcm->out.lock, flags);
}
/* open playback callback */
static int snd_line6_playback_open(struct snd_pcm_substream *substream)
{
int err;
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_line6_pcm *line6pcm = snd_pcm_substream_chip(substream);
err = snd_pcm_hw_constraint_ratdens(runtime, 0, SNDRV_PCM_HW_PARAM_RATE,
&line6pcm->properties->rates);
if (err < 0)
return err;
runtime->hw = line6pcm->properties->playback_hw;
return 0;
}
/* close playback callback */
static int snd_line6_playback_close(struct snd_pcm_substream *substream)
{
return 0;
}
/* playback operators */
struct snd_pcm_ops snd_line6_playback_ops = {
.open = snd_line6_playback_open,
.close = snd_line6_playback_close,
.ioctl = snd_pcm_lib_ioctl,
ALSA: line6: Reorganize PCM stream handling The current code deals with the stream start / stop solely via line6_pcm_acquire() and line6_pcm_release(). This was (supposedly) intended to avoid the races, but it doesn't work as expected. The concurrent acquire and release calls can be performed without proper protections, thus this might result in memory corruption. Furthermore, we can't take a mutex to protect the whole function because it can be called from the PCM trigger callback that is an atomic context. Also spinlock isn't appropriate because the function allocates with kmalloc with GFP_KERNEL. That is, these function just lead to singular problems. This is an attempt to reduce the existing races. First off, separate both the stream buffer management and the stream URB management. The former is protected via a newly introduced state_mutex while the latter is protected via each line6_pcm_stream lock. Secondly, the stream state are now managed in opened and running bit flags of each line6_pcm_stream. Not only this a bit clearer than previous combined bit flags, this also gives a better abstraction. These rewrites allows us to make common hw_params and hw_free callbacks for both playback and capture directions. For the monitor and impulse operations, still line6_pcm_acquire() and line6_pcm_release() are used. They call internally the corresponding functions for both playback and capture streams with proper lock or mutex. Unlike the previous versions, these function don't take the bit masks but the only single type value. Also they are supposed to be applied only as duplex operations. Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-01-27 22:24:09 +08:00
.hw_params = snd_line6_hw_params,
.hw_free = snd_line6_hw_free,
.prepare = snd_line6_prepare,
.trigger = snd_line6_trigger,
.pointer = snd_line6_pointer,
};
int line6_create_audio_out_urbs(struct snd_line6_pcm *line6pcm)
{
struct usb_line6 *line6 = line6pcm->line6;
int i;
line6pcm->out.urbs = kzalloc(
sizeof(struct urb *) * line6->iso_buffers, GFP_KERNEL);
if (line6pcm->out.urbs == NULL)
return -ENOMEM;
/* create audio URBs and fill in constant values: */
for (i = 0; i < line6->iso_buffers; ++i) {
struct urb *urb;
/* URB for audio out: */
urb = line6pcm->out.urbs[i] =
usb_alloc_urb(LINE6_ISO_PACKETS, GFP_KERNEL);
if (urb == NULL)
return -ENOMEM;
urb->dev = line6->usbdev;
urb->pipe =
usb_sndisocpipe(line6->usbdev,
line6->properties->ep_audio_w &
USB_ENDPOINT_NUMBER_MASK);
urb->transfer_flags = URB_ISO_ASAP;
urb->start_frame = -1;
urb->number_of_packets = LINE6_ISO_PACKETS;
urb->interval = LINE6_ISO_INTERVAL;
urb->error_count = 0;
urb->complete = audio_out_callback;
}
return 0;
}