openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/include/net/addrconf.h

287 lines
7.8 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef _ADDRCONF_H
#define _ADDRCONF_H
#define MAX_RTR_SOLICITATIONS 3
#define RTR_SOLICITATION_INTERVAL (4*HZ)
#define MIN_VALID_LIFETIME (2*3600) /* 2 hours */
#define TEMP_VALID_LIFETIME (7*86400)
#define TEMP_PREFERRED_LIFETIME (86400)
ipv6: updates to privacy addresses per RFC 4941. Update the code to handle some of the differences between RFC 3041 and RFC 4941, which obsoletes it. Also a couple of janitorial fixes. - Allow router advertisements to increase the lifetime of temporary addresses. This was not allowed by RFC 3041, but is specified by RFC 4941. It is useful when RA lifetimes are lower than TEMP_{VALID,PREFERRED}_LIFETIME: in this case, the previous code would delete or deprecate addresses prematurely. - Change the default of MAX_RETRY to 3 per RFC 4941. - Add a comment to clarify that the preferred and valid lifetimes in inet6_ifaddr are relative to the timestamp. - Shorten lines to 80 characters in a couple of places. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26 21:50:49 +08:00
#define REGEN_MAX_RETRY (3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define MAX_DESYNC_FACTOR (600)
#define ADDR_CHECK_FREQUENCY (120*HZ)
#define IPV6_MAX_ADDRESSES 16
[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29 19:11:40 +08:00
#include <linux/in.h>
[IPV6]: net/addrconf.h needs to include linux/in6.h earlier Else the in6_addr layout is not known for struct prefix_info. Signed-off-by: Patrick McHardy <kaber@trash.net>
2005-05-04 13:17:18 +08:00
#include <linux/in6.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct prefix_info {
__u8 type;
__u8 length;
__u8 prefix_len;
#if defined(__BIG_ENDIAN_BITFIELD)
__u8 onlink : 1,
autoconf : 1,
reserved : 6;
#elif defined(__LITTLE_ENDIAN_BITFIELD)
__u8 reserved : 6,
autoconf : 1,
onlink : 1;
#else
#error "Please fix <asm/byteorder.h>"
#endif
[IPV6]: Misc endianness annotations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-15 12:56:00 +08:00
__be32 valid;
__be32 prefered;
__be32 reserved2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct in6_addr prefix;
};
#include <linux/netdevice.h>
#include <net/if_inet6.h>
[IPV6]: Include ipv6.h for ipv6_addr_set This patch includes net/ipv6.h from addrconf.h since it needs ipv6_addr_set. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-04 05:25:13 +08:00
#include <net/ipv6.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IN6_ADDR_HSIZE 16
extern int addrconf_init(void);
extern void addrconf_cleanup(void);
[NETNS][IPV6] addrconf - Pass the proper network namespace parameters to addrconf This patch propagates the network namespace pointer to the address configuration routines which need it, which means adding a new parameter to these functions, and make them use it instead of using the initial network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-06 02:46:57 +08:00
extern int addrconf_add_ifaddr(struct net *net,
void __user *arg);
extern int addrconf_del_ifaddr(struct net *net,
void __user *arg);
extern int addrconf_set_dstaddr(struct net *net,
void __user *arg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[NETNS][IPV6]: inet6_addr - check ipv6 address per namespace When a new address is added, we must check if the new address does not already exists. This patch makes this check to be aware of a network namespace, so the check will look if the address already exists for the specified network namespace. While the addresses are browsed, the addresses which do not belong to the namespace are discarded. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 14:43:18 +08:00
extern int ipv6_chk_addr(struct net *net,
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
const struct in6_addr *addr,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct net_device *dev,
int strict);
[NETNS][IPV6]: inet6_addr - check ipv6 address per namespace When a new address is added, we must check if the new address does not already exists. This patch makes this check to be aware of a network namespace, so the check will look if the address already exists for the specified network namespace. While the addresses are browsed, the addresses which do not belong to the namespace are discarded. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 14:43:18 +08:00
[IPV6] MIP6: Loadable module support for MIPv6. This patch makes MIPv6 loadable module named "mip6". Here is a modprobe.conf(5) example to load it automatically when user application uses XFRM state for MIPv6: alias xfrm-type-10-43 mip6 alias xfrm-type-10-60 mip6 Some MIPv6 feature is not included by this modular, however, it should not be affected to other features like either IPsec or IPv6 with and without the patch. We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt separately for future work. Loadable features: * MH receiving check (to send ICMP error back) * RO header parsing and building (i.e. RH2 and HAO in DSTOPTS) * XFRM policy/state database handling for RO These are NOT covered as loadable: * Home Address flags and its rule on source address selection * XFRM sub policy (depends on its own kernel option) * XFRM functions to receive RO as IPv6 extension header * MH sending/receiving through raw socket if user application opens it (since raw socket allows to do so) * RH2 sending as ancillary data * RH2 operation with setsockopt(2) Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-27 14:56:32 +08:00
#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
[NETNS][IPV6]: inet6_addr - make ipv6_chk_home_addr namespace aware Looks if the address is belonging to the network namespace, otherwise discard the address for the check. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 14:44:40 +08:00
extern int ipv6_chk_home_addr(struct net *net,
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
const struct in6_addr *addr);
[IPV6] MIP6: Add inbound interface of routing header type 2. Add inbound interface of routing header type 2 for Mobile IPv6. Based on MIPL2 kernel patch. This patch was also written by: Ville Nuorvala <vnuorval@tcs.hut.fi> Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-24 10:16:22 +08:00
#endif
[IPV6]: Unify ip6_onlink() and ipip6_onlink(). Both are identical, let's create ipv6_chk_prefix() and use it in both places.
2008-03-16 10:54:23 +08:00
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
extern int ipv6_chk_prefix(const struct in6_addr *addr,
[IPV6]: Unify ip6_onlink() and ipip6_onlink(). Both are identical, let's create ipv6_chk_prefix() and use it in both places.
2008-03-16 10:54:23 +08:00
struct net_device *dev);
[NETNS][IPV6]: inet6_addr - ipv6_get_ifaddr namespace aware The inet6_addr_lst is browsed taking into account the network namespace specified as parameter. If an address does not belong to the specified namespace, it is ignored. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 14:44:09 +08:00
extern struct inet6_ifaddr *ipv6_get_ifaddr(struct net *net,
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 14:42:10 +08:00
const struct in6_addr *addr,
[NETNS][IPV6]: inet6_addr - ipv6_get_ifaddr namespace aware The inet6_addr_lst is browsed taking into account the network namespace specified as parameter. If an address does not belong to the specified namespace, it is ignored. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-11 14:44:09 +08:00
struct net_device *dev,
int strict);
netns: Add network namespace argument to rt6_fill_node() and ipv6_dev_get_saddr() ipv6_dev_get_saddr() blindly de-references dst_dev to get the network namespace, but some callers might pass NULL. Change callers to pass a namespace pointer instead. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-15 06:33:21 +08:00
extern int ipv6_dev_get_saddr(struct net *net,
struct net_device *dev,
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 14:42:10 +08:00
const struct in6_addr *daddr,
[IPV6]: Support Source Address Selection API (RFC5014). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-03-25 08:37:42 +08:00
unsigned int srcprefs,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct in6_addr *saddr);
[IPV6] ADDRCONF: Optimistic Duplicate Address Detection (RFC 4429) Support. Nominally an autoconfigured IPv6 address is added to an interface in the Tentative state (as per RFC 2462). Addresses in this state remain in this state while the Duplicate Address Detection process operates on them to determine their uniqueness on the network. During this period, these tentative addresses may not be used for communication, increasing the time before a node may be able to communicate on a network. Using Optimistic Duplicate Address Detection, autoconfigured addresses may be used immediately for communication on the network, as long as certain rules are followed to avoid conflicts with other nodes during the Duplicate Address Detection process. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-26 08:08:10 +08:00
extern int ipv6_get_lladdr(struct net_device *dev,
struct in6_addr *addr,
unsigned char banned_flags);
ipv6: Fix conflict resolutions during ipv6 binding The ipv6 version of bind_conflict code calls ipv6_rcv_saddr_equal() which at times wrongly identified intersections between addresses. It particularly broke down under a few instances and caused erroneous bind conflicts. Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-25 00:24:51 +08:00
extern int ipv6_rcv_saddr_equal(const struct sock *sk,
const struct sock *sk2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void addrconf_join_solict(struct net_device *dev,
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
const struct in6_addr *addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void addrconf_leave_solict(struct inet6_dev *idev,
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
const struct in6_addr *addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-27 16:37:49 +08:00
static inline unsigned long addrconf_timeout_fixup(u32 timeout,
unsigned unit)
{
if (timeout == 0xffffffff)
return ~0UL;
/*
* Avoid arithmetic overflow.
* Assuming unit is constant and non-zero, this "if" statement
* will go away on 64bit archs.
*/
if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit)
return LONG_MAX / unit;
return timeout;
}
static inline int addrconf_finite_timeout(unsigned long timeout)
{
return ~timeout;
}
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table. Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 14:56:23 +08:00
/*
* IPv6 Address Label subsystem (addrlabel.c)
*/
extern int ipv6_addr_label_init(void);
ipv6: add a missing unregister_pernet_subsys call Clean up a missing exit path in the ipv6 module init routines. In addrconf_init we call ipv6_addr_label_init which calls register_pernet_subsys for the ipv6_addr_label_ops structure. But if module loading fails, or if the ipv6 module is removed, there is no corresponding unregister_pernet_subsys call, which leaves a now-bogus address on the pernet_list, leading to oopses in subsequent registrations. This patch cleans up both the failed load path and the unload path. Tested by myself with good results. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> include/net/addrconf.h | 1 + net/ipv6/addrconf.c | 11 ++++++++--- net/ipv6/addrlabel.c | 5 +++++ 3 files changed, 14 insertions(+), 3 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-24 17:55:52 +08:00
extern void ipv6_addr_label_cleanup(void);
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table. Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 14:56:23 +08:00
extern void ipv6_addr_label_rtnl_register(void);
ipv6 netns: Address labels per namespace This pacth makes IPv6 address labels per network namespace. It keeps the global label tables, ip6addrlbl_table, but adds a 'net' member to each ip6addrlbl_entry. This new member is taken into account when matching labels. Changelog ========= * v1: Initial version * v2: * Minize the penalty when network namespaces are not configured: * the 'net' member is added only if CONFIG_NET_NS is defined. This saves space when network namespaces are not configured. * 'net' value is retrieved with the inlined function ip6addrlbl_net() that always return &init_net when CONFIG_NET_NS is not defined. * 'net' member in ip6addrlbl_entry renamed to the less generic 'lbl_net' name (helps code search). Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-05-28 20:51:24 +08:00
extern u32 ipv6_addr_label(struct net *net,
const struct in6_addr *addr,
[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table. Policy table is implemented as an RCU linear list since we do not expect large list nor frequent updates. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-14 14:56:23 +08:00
int type, int ifindex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* multicast prototypes (mcast.c)
*/
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 14:42:10 +08:00
extern int ipv6_sock_mc_join(struct sock *sk, int ifindex,
const struct in6_addr *addr);
extern int ipv6_sock_mc_drop(struct sock *sk, int ifindex,
const struct in6_addr *addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void ipv6_sock_mc_close(struct sock *sk);
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 14:42:10 +08:00
extern int inet6_mc_check(struct sock *sk,
const struct in6_addr *mc_addr,
const struct in6_addr *src_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 14:42:10 +08:00
extern int ipv6_dev_mc_inc(struct net_device *dev, const struct in6_addr *addr);
extern int __ipv6_dev_mc_dec(struct inet6_dev *idev, const struct in6_addr *addr);
extern int ipv6_dev_mc_dec(struct net_device *dev, const struct in6_addr *addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void ipv6_mc_up(struct inet6_dev *idev);
extern void ipv6_mc_down(struct inet6_dev *idev);
bonding: remap muticast addresses without using dev_close() and dev_open() This patch fixes commit e36b9d16c6a6d0f59803b3ef04ff3c22c3844c10. The approach there is to call dev_close()/dev_open() whenever the device type is changed in order to remap the device IP multicast addresses to HW multicast addresses. This approach suffers from 2 drawbacks: *. It assumes tha the device is UP when calling dev_close(), or otherwise dev_close() has no affect. It is worth to mention that initscripts (Redhat) and sysconfig (Suse) doesn't act the same in this matter. *. dev_close() has other side affects, like deleting entries from the routing table, which might be unnecessary. The fix here is to directly remap the IP multicast addresses to HW multicast addresses for a bonding device that changes its type, and nothing else. Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 17:37:40 +08:00
extern void ipv6_mc_unmap(struct inet6_dev *idev);
extern void ipv6_mc_remap(struct inet6_dev *idev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void ipv6_mc_init_dev(struct inet6_dev *idev);
extern void ipv6_mc_destroy_dev(struct inet6_dev *idev);
extern void addrconf_dad_failure(struct inet6_ifaddr *ifp);
[IPV6]: Make address arguments const. - net/ipv6/addrconf.c: ipv6_get_ifaddr(), ipv6_dev_get_saddr() - net/ipv6/mcast.c: ipv6_sock_mc_join(), ipv6_sock_mc_drop(), inet6_mc_check(), ipv6_dev_mc_inc(), __ipv6_dev_mc_dec(), ipv6_dev_mc_dec(), ipv6_chk_mcast_addr() - net/ipv6/route.c: rt6_lookup(), icmp6_dst_alloc() - net/ipv6/ip6_output.c: ip6_nd_hdr() - net/ipv6/ndisc.c: ndisc_send_ns(), ndisc_send_rs(), ndisc_send_redirect(), ndisc_get_neigh(), __ndisc_send() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-10 14:42:10 +08:00
extern int ipv6_chk_mcast_addr(struct net_device *dev,
const struct in6_addr *group,
const struct in6_addr *src_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int ipv6_is_mld(struct sk_buff *skb, int nexthdr);
ipv6: Check RA for sllao when configuring optimistic ipv6 address (v2) Recently Dave noticed that a test we did in ipv6_add_addr to see if we next hop route for the interface we're adding an addres to was wrong (see commit 7ffbcecbeed91e5874e9a1cfc4c0cbb07dac3069). for one, it never triggers, and two, it was completely wrong to begin with. This test was meant to cover this section of RFC 4429: 3.3 Modifications to RFC 2462 Stateless Address Autoconfiguration * (modifies section 5.5) A host MAY choose to configure a new address as an Optimistic Address. A host that does not know the SLLAO of its router SHOULD NOT configure a new address as Optimistic. A router SHOULD NOT configure an Optimistic Address. This patch should bring us into proper compliance with the above clause. Since we only add a SLAAC address after we've received a RA which may or may not contain a source link layer address option, we can pass a pointer to that option to addrconf_prefix_rcv (which may be null if the option is not present), and only set the optimistic flag if the option was found in the RA. Change notes: (v2) modified the new parameter to addrconf_prefix_rcv to be a bool rather than a pointer to make its use more clear as per request from davem. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04 18:49:15 +08:00
extern void addrconf_prefix_rcv(struct net_device *dev,
u8 *opt, int len, bool sllao);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* anycast prototypes (anycast.c)
*/
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
extern int ipv6_sock_ac_join(struct sock *sk,int ifindex, const struct in6_addr *addr);
extern int ipv6_sock_ac_drop(struct sock *sk,int ifindex, const struct in6_addr *addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void ipv6_sock_ac_close(struct sock *sk);
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
extern int inet6_ac_check(struct sock *sk, const struct in6_addr *addr, int ifindex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
extern int ipv6_dev_ac_inc(struct net_device *dev, const struct in6_addr *addr);
extern int __ipv6_dev_ac_dec(struct inet6_dev *idev, const struct in6_addr *addr);
[NETNS][IPV6] anycast - handle several network namespace Make use of the network namespace information to have this protocol to handle several network namespace. Signed-off-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Benjamin Thery <benjamin.thery@bull.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-03-27 07:52:32 +08:00
extern int ipv6_chk_acast_addr(struct net *net, struct net_device *dev,
inet: constify ip headers and in6_addr Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers where possible, to make code intention more obvious. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 12:53:02 +08:00
const struct in6_addr *addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Device notifier */
extern int register_inet6addr_notifier(struct notifier_block *nb);
extern int unregister_inet6addr_notifier(struct notifier_block *nb);
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
/**
* __in6_dev_get - get inet6_dev pointer from netdevice
* @dev: network device
*
* Caller must hold rcu_read_lock or RTNL, because this function
* does not take a reference on the inet6_dev.
*/
static inline struct inet6_dev *__in6_dev_get(const struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
return rcu_dereference_rtnl(dev->ip6_ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
/**
* in6_dev_get - get inet6_dev pointer from netdevice
* @dev: network device
*
* This version can be used in any context, and takes a reference
* on the inet6_dev. Callers must use in6_dev_put() later to
* release this reference.
*/
static inline struct inet6_dev *in6_dev_get(const struct net_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
struct inet6_dev *idev;
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-23 05:44:24 +08:00
rcu_read_lock();
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
idev = rcu_dereference(dev->ip6_ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (idev)
atomic_inc(&idev->refcnt);
[IPV6] ADDRCONF: Convert addrconf_lock to RCU. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-23 05:44:24 +08:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return idev;
}
extern void in6_dev_finish_destroy(struct inet6_dev *idev);
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
static inline void in6_dev_put(struct inet6_dev *idev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
if (atomic_dec_and_test(&idev->refcnt))
in6_dev_finish_destroy(idev);
}
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
static inline void __in6_dev_put(struct inet6_dev *idev)
{
atomic_dec(&idev->refcnt);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
static inline void in6_dev_hold(struct inet6_dev *idev)
{
atomic_inc(&idev->refcnt);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void inet6_ifa_finish_destroy(struct inet6_ifaddr *ifp);
static inline void in6_ifa_put(struct inet6_ifaddr *ifp)
{
if (atomic_dec_and_test(&ifp->refcnt))
inet6_ifa_finish_destroy(ifp);
}
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
static inline void __in6_ifa_put(struct inet6_ifaddr *ifp)
{
atomic_dec(&ifp->refcnt);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
static inline void in6_ifa_hold(struct inet6_ifaddr *ifp)
{
atomic_inc(&ifp->refcnt);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* compute link-local solicited-node multicast address
*/
static inline void addrconf_addr_solict_mult(const struct in6_addr *addr,
struct in6_addr *solicited)
{
ipv6_addr_set(solicited,
[IPV6]: Use htonl() instead of __constant_htonl() where appricable. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-28 16:03:12 +08:00
htonl(0xFF020000), 0,
htonl(0x1),
htonl(0xFF000000) | addr->s6_addr32[3]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int ipv6_addr_is_multicast(const struct in6_addr *addr)
{
[IPV6]: Use htonl() instead of __constant_htonl() where appricable. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-02-28 16:03:12 +08:00
return (addr->s6_addr32[0] & htonl(0xFF000000)) == htonl(0xFF000000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int ipv6_addr_is_ll_all_nodes(const struct in6_addr *addr)
{
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
return ((addr->s6_addr32[0] ^ htonl(0xff020000)) |
[IPV6]: Use XOR and OR rather than mutiple ands for ipv6 address comparisons. ipv6_addr_equal(), ipv6_addr_v4mapped(), ipv6_addr_is_ll_all_{nodes,routers}(), ipv6_masked_addr_cmp() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-11 19:17:55 +08:00
addr->s6_addr32[1] | addr->s6_addr32[2] |
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
(addr->s6_addr32[3] ^ htonl(0x00000001))) == 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static inline int ipv6_addr_is_ll_all_routers(const struct in6_addr *addr)
{
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
return ((addr->s6_addr32[0] ^ htonl(0xff020000)) |
[IPV6]: Use XOR and OR rather than mutiple ands for ipv6 address comparisons. ipv6_addr_equal(), ipv6_addr_v4mapped(), ipv6_addr_is_ll_all_{nodes,routers}(), ipv6_masked_addr_cmp() Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-04-11 19:17:55 +08:00
addr->s6_addr32[1] | addr->s6_addr32[2] |
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
(addr->s6_addr32[3] ^ htonl(0x00000002))) == 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29 19:11:40 +08:00
static inline int ipv6_addr_is_isatap(const struct in6_addr *addr)
{
ipv6: addrconf.h cleanups - Use rcu_dereference_rtnl() in __in6_dev_get - kerneldoc for __in6_dev_get() and in6_dev_get() - Use inline functions instead of macros Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-21 14:57:39 +08:00
return (addr->s6_addr32[2] | htonl(0x02000000)) == htonl(0x02005EFE);
[IPV6]: Add RFC4214 support This patch includes support for the Intra-Site Automatic Tunnel Addressing Protocol (ISATAP) per RFC4214. It uses the SIT module, and is configured using extensions to the "iproute2" utility. The diffs are specific to the Linux 2.6.24-rc2 kernel distribution. This version includes the diff for ./include/linux/if.h which was missing in the v2.4 submission and is needed to make the patch compile. The patch has been installed, compiled and tested in a clean 2.6.24-rc2 kernel build area. Signed-off-by: Fred L. Templin <fred.l.templin@boeing.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-29 19:11:40 +08:00
}
[NET]: Fix sparse warnings Of this type, mostly: CHECK net/ipv6/netfilter.c net/ipv6/netfilter.c:96:12: warning: symbol 'ipv6_netfilter_init' was not declared. Should it be static? net/ipv6/netfilter.c:101:6: warning: symbol 'ipv6_netfilter_fini' was not declared. Should it be static? Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-16 13:18:02 +08:00
#ifdef CONFIG_PROC_FS
extern int if6_proc_init(void);
extern void if6_proc_exit(void);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif