openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/s390/include/asm/setup.h

131 lines
4.4 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* S390 version
s390/comments: unify copyright messages and remove file names Remove the file name from the comment at top of many files. In most cases the file name was wrong anyway, so it's rather pointless. Also unify the IBM copyright statement. We did have a lot of sightly different statements and wanted to change them one after another whenever a file gets touched. However that never happened. Instead people start to take the old/"wrong" statements to use as a template for new files. So unify all of them in one go. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2012-07-20 17:15:04 +08:00
* Copyright IBM Corp. 1999, 2010
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#ifndef _ASM_S390_SETUP_H
#define _ASM_S390_SETUP_H
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 23:02:48 +08:00
#include <linux/const.h>
UAPI: (Scripted) Disintegrate arch/s390/include/asm Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-10-09 16:47:31 +08:00
#include <uapi/asm/setup.h>
[PATCH] cleanup asm/setup.h userspace visibility Make the contents of the userspace asm/setup.h header consistent on all architectures: - export setup.h to userspace on all architectures - export only COMMAND_LINE_SIZE to userspace - frv: move COMMAND_LINE_SIZE from param.h - i386: remove duplicate COMMAND_LINE_SIZE from param.h - arm: - export ATAGs to userspace - change u8/u16/u32 to __u8/__u16/__u32 Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 12:40:38 +08:00
[PATCH] s390: add #ifdef __KERNEL__ to asm-s390/setup.h Based on a patch from Maximilian Attems <maks@sternwelten.at> . Nothing in asm-s390/setup.h is of interest for user space. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 09:56:03 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define PARMAREA 0x10400
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 23:02:48 +08:00
/*
s390/setup: cleanup machine flags Over time some machine flags got unused (e.g. MACHINE_FLAG_MVPG) or are available on all 64bit systems (MACHINE_FLAG_CSP, MACHINE_FLAG_IEEE) - let's remove them. Reorder the other ones to match the order of the MACHINE_HAS_* macros and renumber all bits to avoid holes. Also fix the comment about where the flags are detected. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-15 16:26:30 +08:00
* Machine features detected in early.c
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 23:02:48 +08:00
*/
#define MACHINE_FLAG_VM _BITUL(0)
s390/setup: cleanup machine flags Over time some machine flags got unused (e.g. MACHINE_FLAG_MVPG) or are available on all 64bit systems (MACHINE_FLAG_CSP, MACHINE_FLAG_IEEE) - let's remove them. Reorder the other ones to match the order of the MACHINE_HAS_* macros and renumber all bits to avoid holes. Also fix the comment about where the flags are detected. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-15 16:26:30 +08:00
#define MACHINE_FLAG_KVM _BITUL(1)
#define MACHINE_FLAG_LPAR _BITUL(2)
#define MACHINE_FLAG_DIAG9C _BITUL(3)
#define MACHINE_FLAG_ESOP _BITUL(4)
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 23:02:48 +08:00
#define MACHINE_FLAG_IDTE _BITUL(5)
s390/setup: cleanup machine flags Over time some machine flags got unused (e.g. MACHINE_FLAG_MVPG) or are available on all 64bit systems (MACHINE_FLAG_CSP, MACHINE_FLAG_IEEE) - let's remove them. Reorder the other ones to match the order of the MACHINE_HAS_* macros and renumber all bits to avoid holes. Also fix the comment about where the flags are detected. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-12-15 16:26:30 +08:00
#define MACHINE_FLAG_DIAG44 _BITUL(6)
#define MACHINE_FLAG_EDAT1 _BITUL(7)
#define MACHINE_FLAG_EDAT2 _BITUL(8)
#define MACHINE_FLAG_LPP _BITUL(9)
#define MACHINE_FLAG_TOPOLOGY _BITUL(10)
#define MACHINE_FLAG_TE _BITUL(11)
#define MACHINE_FLAG_TLB_LC _BITUL(12)
#define MACHINE_FLAG_VX _BITUL(13)
s390/mm: add no-dat TLB flush optimization Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-07-26 22:53:09 +08:00
#define MACHINE_FLAG_TLB_GUEST _BITUL(14)
#define MACHINE_FLAG_NX _BITUL(15)
#define MACHINE_FLAG_GS _BITUL(16)
s390/time: add support for the TOD clock epoch extension The TOD epoch extension adds 8 epoch bits to the TOD clock to provide a continuous clock after 2042/09/17. The store-clock-extended (STCKE) instruction will store the epoch index in the first byte of the 16 bytes stored by the instruction. The read_boot_clock64 and the read_presistent_clock64 functions need to take the additional bits into account to give the correct result after 2042/09/17. The clock-comparator register will stay 64 bit wide. The comparison of the clock-comparator with the TOD clock is limited to bytes 1 to 8 of the extended TOD format. To deal with the overflow problem due to an epoch change the clock-comparator sign control in CR0 can be used to switch the comparison of the 64-bit TOD clock with the clock-comparator to a signed comparison. The decision between the signed vs. unsigned clock-comparator comparisons is done at boot time. Only if the TOD clock is in the second half of a 142 year epoch the signed comparison is used. This solves the epoch overflow issue as long as the machine is booted at least once in an epoch. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-27 18:41:39 +08:00
#define MACHINE_FLAG_SCC _BITUL(17)
s390/entry: add assembler macro to conveniently tests under mask Various functions in entry.S perform test-under-mask instructions to test for particular bits in memory. Because test-under-mask uses a mask value of one byte, the mask value and the offset into the memory must be calculated manually. This easily introduces errors and is hard to review and read. Introduce the TSTMSK assembler macro to specify a mask constant and let the macro calculate the offset and the byte mask to generate a test-under-mask instruction. The benefit is that existing symbolic constants can now be used for tests. Also the macro checks for zero mask values and mask values that consist of multiple bytes. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-01 23:02:48 +08:00
s390/cpumf: rework program parameter setting to detect guest samples The program parameter can be used to mark hardware samples with some token. Previously, it was used to mark guest samples only. Improve the program parameter doubleword by combining two parts, the leftmost LPP part and the rightmost PID part. Set the PID part for processes by using the task PID. To distinguish host and guest samples for the kernel (PID part is zero), the guest must always set the program paramater to a non-zero value. Use the leftmost bit in the LPP part of the program parameter to be able to detect guest kernel samples. [brueckner@linux.vnet.ibm.com]: Split __LC_CURRENT and introduced __LC_LPP. Corrected __LC_CURRENT users and adjusted assembler parts. And updated the commit message accordingly. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2015-10-07 00:06:15 +08:00
#define LPP_MAGIC _BITUL(31)
#define LPP_PFAULT_PID_MASK _AC(0xffffffff, UL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifndef __ASSEMBLY__
[S390] Cleanup struct _lowcore usage and defines. Use asm offsets to make sure the offset defines to struct _lowcore and its layout don't get out of sync. Also add a BUILD_BUG_ON() which checks that the size of the structure is sane. And while being at it change those sites which use odd casts to access the current lowcore. These should use S390_lowcore instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 05:37:43 +08:00
#include <asm/lowcore.h>
#include <asm/types.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IPL_DEVICE (*(unsigned long *) (0x10400))
#define INITRD_START (*(unsigned long *) (0x10408))
#define INITRD_SIZE (*(unsigned long *) (0x10410))
[S390] kdump backend code This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:40 +08:00
#define OLDMEM_BASE (*(unsigned long *) (0x10418))
#define OLDMEM_SIZE (*(unsigned long *) (0x10420))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define COMMAND_LINE ((char *) (0x10480))
[S390] fix "mem=" handling in case of standby memory Standby memory detected with the sclp interface gets always registered with add_memory calls without considering the limitationt that the "mem=" kernel paramater implies. So fix this and only register standby memory that is below the specified limit. This fixes zfcpdump since it uses "mem=32M". In case there is appr. 2GB standby memory present all of usable memory would be used for the struct pages needed for standby memory. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-02-19 22:19:01 +08:00
extern int memory_end_set;
extern unsigned long memory_end;
s390/mm: Convert bootmem to memblock The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-01-30 01:16:01 +08:00
extern unsigned long max_physmem_end;
[S390] Cleanup memory_chunk array usage. Need this at yet another file and don't want to add yet another extern... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04 22:40:38 +08:00
s390/mm: Convert bootmem to memblock The original bootmem allocator is getting replaced by memblock. To cover the needs of the s390 kdump implementation the physical memory list is used. With this patch the bootmem allocator and its bitmaps are completely removed from s390. Signed-off-by: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-01-30 01:16:01 +08:00
extern void detect_memory_memblock(void);
[S390] Move memory detection code to own file. Move memory detection code to own file and also simplify it. Also add an interface which can be called at any time to get the current memory layout. This interface is needed by our kernel internal system dumper. Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Cc: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-14 15:59:21 +08:00
[S390] s390: move machine flags to lowcore Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-14 21:36:16 +08:00
#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
[S390] add MACHINE_IS_LPAR flag Introduce the MACHINE_IS_LPAR flag for code that should only be executed if Linux is running in an LPAR. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-02-27 05:37:38 +08:00
#define MACHINE_IS_LPAR (S390_lowcore.machine_flags & MACHINE_FLAG_LPAR)
[S390] s390: move machine flags to lowcore Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-14 21:36:16 +08:00
#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
s390/mm: implement software dirty bits The s390 architecture is unique in respect to dirty page detection, it uses the change bit in the per-page storage key to track page modifications. All other architectures track dirty bits by means of page table entries. This property of s390 has caused numerous problems in the past, e.g. see git commit ef5d437f71afdf4a "mm: fix XFS oops due to dirty pages without buffers on s390". To avoid future issues in regard to per-page dirty bits convert s390 to a fault based software dirty bit detection mechanism. All user page table entries which are marked as clean will be hardware read-only, even if the pte is supposed to be writable. A write by the user process will trigger a protection fault which will cause the user pte to be marked as dirty and the hardware read-only bit is removed. With this change the dirty bit in the storage key is irrelevant for Linux as a host, but the storage key is still required for KVM guests. The effect is that page_test_and_clear_dirty and the related code can be removed. The referenced bit in the storage key is still used by the page_test_and_clear_young primitive to provide page age information. For page cache pages of mappings with mapping_cap_account_dirty there will not be any change in behavior as the dirty bit tracking already uses read-only ptes to control the amount of dirty pages. Only for swap cache pages and pages of mappings without mapping_cap_account_dirty there can be additional protection faults. To avoid an excessive number of additional faults the mk_pte primitive checks for PageDirty if the pgprot value allows for writes and pre-dirties the pte. That avoids all additional faults for tmpfs and shmem pages until these pages are added to the swap cache. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-07 20:17:37 +08:00
#define MACHINE_HAS_ESOP (S390_lowcore.machine_flags & MACHINE_FLAG_ESOP)
[S390] s390: move machine flags to lowcore Currently the storage of the machine flags is a globally exported unsigned long long variable. By moving the storage location into the lowcore struct we allow assembler code to check machine_flags directly even without needing a register. Addtionally the lowcore and therefore the machine flags too will be in cache most of the time. Signed-off-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-14 21:36:16 +08:00
#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
s390/facilities: cleanup PFMF and HPAGE machine facility detection MACHINE_HAS_PFMF and MACHINE_HAS_HPAGE actually have the same semantics: the cpu has the EDAT1 facility installed in zArch mode. So remove one of the feature flags in machine_flags and rename the other one to EDAT1. The two old macros simply get mapped to MACHINE_HAS_EDAT1. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-28 21:06:41 +08:00
#define MACHINE_HAS_EDAT1 (S390_lowcore.machine_flags & MACHINE_FLAG_EDAT1)
s390/mm: use pfmf instruction to initialize storage keys Make use of the pfmf instruction, if available, to initialize storage keys of whole 1MB or 2GB frames instead of initializing every single page with the sske instruction. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-09-27 16:45:06 +08:00
#define MACHINE_HAS_EDAT2 (S390_lowcore.machine_flags & MACHINE_FLAG_EDAT2)
s390/cleanup: rename SPP to LPP The set-program-parameter (SPP) instruction has been renamed to load-program-parameter (LPP) (see SA23-2260). Reflect this change and rename all macro/instruction references. Also remove the duplicate SPP/LPP entry in the kernel disassembler instruction list. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-12 01:11:09 +08:00
#define MACHINE_HAS_LPP (S390_lowcore.machine_flags & MACHINE_FLAG_LPP)
[S390] topology: clean up facility detection Move cpu topology facility detection to early setup code where it should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25 22:10:52 +08:00
#define MACHINE_HAS_TOPOLOGY (S390_lowcore.machine_flags & MACHINE_FLAG_TOPOLOGY)
s390: add support for transactional memory Allow user-space processes to use transactional execution (TX). If the TX facility is available user space programs can use transactions for fine-grained serialization based on the data objects that are referenced during a transaction. This is useful for lockless data structures and speculative compiler optimizations. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-07-31 17:03:04 +08:00
#define MACHINE_HAS_TE (S390_lowcore.machine_flags & MACHINE_FLAG_TE)
s390/mm,tlb: optimize TLB flushing for zEC12 The zEC12 machines introduced the local-clearing control for the IDTE and IPTE instruction. If the control is set only the TLB of the local CPU is cleared of entries, either all entries of a single address space for IDTE, or the entry for a single page-table entry for IPTE. Without the local-clearing control the TLB flush is broadcasted to all CPUs in the configuration, which is expensive. The reset of the bit mask of the CPUs that need flushing after a non-local IDTE is tricky. As TLB entries for an address space remain in the TLB even if the address space is detached a new bit field is required to keep track of attached CPUs vs. CPUs in the need of a flush. After a non-local flush with IDTE the bit-field of attached CPUs is copied to the bit-field of CPUs in need of a flush. The ordering of operations on cpu_attach_mask, attach_count and mm_cpumask(mm) is such that an underindication in mm_cpumask(mm) is prevented but an overindication in mm_cpumask(mm) is possible. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-04-03 19:55:01 +08:00
#define MACHINE_HAS_TLB_LC (S390_lowcore.machine_flags & MACHINE_FLAG_TLB_LC)
s390: add support for vector extension The vector extension introduces 32 128-bit vector registers and a set of instruction to operate on the vector registers. The kernel can control the use of vector registers for the problem state program with a bit in control register 0. Once enabled for a process the kernel needs to retain the content of the vector registers on context switch. The signal frame is extended to include the vector registers. Two new register sets NT_S390_VXRS_LOW and NT_S390_VXRS_HIGH are added to the regset interface for the debugger and core dumps. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2014-10-06 23:53:53 +08:00
#define MACHINE_HAS_VX (S390_lowcore.machine_flags & MACHINE_FLAG_VX)
s390/mm: add no-dat TLB flush optimization Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-07-26 22:53:09 +08:00
#define MACHINE_HAS_TLB_GUEST (S390_lowcore.machine_flags & MACHINE_FLAG_TLB_GUEST)
s390: add no-execute support Bit 0x100 of a page table, segment table of region table entry can be used to disallow code execution for the virtual addresses associated with the entry. There is one tricky bit, the system call to return from a signal is part of the signal frame written to the user stack. With a non-executable stack this would stop working. To avoid breaking things the protection fault handler checks the opcode that caused the fault for 0x0a77 (sys_sigreturn) and 0x0aad (sys_rt_sigreturn) and injects a system call. This is preferable to the alternative solution with a stub function in the vdso because it works for vdso=off and statically linked binaries as well. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-03-22 17:54:24 +08:00
#define MACHINE_HAS_NX (S390_lowcore.machine_flags & MACHINE_FLAG_NX)
s390: add a system call for guarded storage This adds a new system call to enable the use of guarded storage for user space processes. The system call takes two arguments, a command and pointer to a guarded storage control block: s390_guarded_storage(int command, struct gs_cb *gs_cb); The second argument is relevant only for the GS_SET_BC_CB command. The commands in detail: 0 - GS_ENABLE Enable the guarded storage facility for the current task. The initial content of the guarded storage control block will be all zeros. After the enablement the user space code can use load-guarded-storage-controls instruction (LGSC) to load an arbitrary control block. While a task is enabled the kernel will save and restore the current content of the guarded storage registers on context switch. 1 - GS_DISABLE Disables the use of the guarded storage facility for the current task. The kernel will cease to save and restore the content of the guarded storage registers, the task specific content of these registers is lost. 2 - GS_SET_BC_CB Set a broadcast guarded storage control block. This is called per thread and stores a specific guarded storage control block in the task struct of the current task. This control block will be used for the broadcast event GS_BROADCAST. 3 - GS_CLEAR_BC_CB Clears the broadcast guarded storage control block. The guarded- storage control block is removed from the task struct that was established by GS_SET_BC_CB. 4 - GS_BROADCAST Sends a broadcast to all thread siblings of the current task. Every sibling that has established a broadcast guarded storage control block will load this control block and will be enabled for guarded storage. The broadcast guarded storage control block is used up, a second broadcast without a refresh of the stored control block with GS_SET_BC_CB will not have any effect. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-26 21:10:34 +08:00
#define MACHINE_HAS_GS (S390_lowcore.machine_flags & MACHINE_FLAG_GS)
s390/time: add support for the TOD clock epoch extension The TOD epoch extension adds 8 epoch bits to the TOD clock to provide a continuous clock after 2042/09/17. The store-clock-extended (STCKE) instruction will store the epoch index in the first byte of the 16 bytes stored by the instruction. The read_boot_clock64 and the read_presistent_clock64 functions need to take the additional bits into account to give the correct result after 2042/09/17. The clock-comparator register will stay 64 bit wide. The comparison of the clock-comparator with the TOD clock is limited to bytes 1 to 8 of the extended TOD format. To deal with the overflow problem due to an epoch change the clock-comparator sign control in CR0 can be used to switch the comparison of the 64-bit TOD clock with the clock-comparator to a signed comparison. The decision between the signed vs. unsigned clock-comparator comparisons is done at boot time. Only if the TOD clock is in the second half of a 142 year epoch the signed comparison is used. This solves the epoch overflow issue as long as the machine is booted at least once in an epoch. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-27 18:41:39 +08:00
#define MACHINE_HAS_SCC (S390_lowcore.machine_flags & MACHINE_FLAG_SCC)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Console mode. Override with conmode=
*/
extern unsigned int console_mode;
extern unsigned int console_devno;
extern unsigned int console_irq;
[S390] Get rid of a lot of sparse warnings. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 04:16:47 +08:00
extern char vmhalt_cmd[];
extern char vmpoff_cmd[];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define CONSOLE_IS_UNDEFINED (console_mode == 0)
#define CONSOLE_IS_SCLP (console_mode == 1)
#define CONSOLE_IS_3215 (console_mode == 2)
#define CONSOLE_IS_3270 (console_mode == 3)
s390/console: Make preferred console handling more consistent Use the same code structure when determining preferred consoles for Linux running as KVM guest as with Linux running in LPAR and z/VM guest: - Extend the console_mode variable to cover vt220 and hvc consoles - Determine sensible console defaults in conmode_default() - Remove KVM-special handling in set_preferred_console() Ensure that the sclp line mode console is also registered when the vt220 console was selected to not change existing behavior that someone might be relying on. As an externally visible change, KVM guest users can now select the 3270 or 3215 console devices using the conmode= kernel parameter, provided that support for the corresponding driver was compiled into the kernel. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-07-07 13:52:38 +08:00
#define CONSOLE_IS_VT220 (console_mode == 4)
#define CONSOLE_IS_HVC (console_mode == 5)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define SET_CONSOLE_SCLP do { console_mode = 1; } while (0)
#define SET_CONSOLE_3215 do { console_mode = 2; } while (0)
#define SET_CONSOLE_3270 do { console_mode = 3; } while (0)
s390/console: Make preferred console handling more consistent Use the same code structure when determining preferred consoles for Linux running as KVM guest as with Linux running in LPAR and z/VM guest: - Extend the console_mode variable to cover vt220 and hvc consoles - Determine sensible console defaults in conmode_default() - Remove KVM-special handling in set_preferred_console() Ensure that the sclp line mode console is also registered when the vt220 console was selected to not change existing behavior that someone might be relying on. As an externally visible change, KVM guest users can now select the 3270 or 3215 console devices using the conmode= kernel parameter, provided that support for the corresponding driver was compiled into the kernel. Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-07-07 13:52:38 +08:00
#define SET_CONSOLE_VT220 do { console_mode = 4; } while (0)
#define SET_CONSOLE_HVC do { console_mode = 5; } while (0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[S390] boot from NSS support Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-06 04:18:24 +08:00
#define NSS_NAME_SIZE 8
extern char kernel_nss_name[];
Disintegrate asm/system.h for S390 Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
2012-03-29 01:30:02 +08:00
#ifdef CONFIG_PFAULT
extern int pfault_init(void);
extern void pfault_fini(void);
#else /* CONFIG_PFAULT */
#define pfault_init() ({-1;})
#define pfault_fini() do { } while (0)
#endif /* CONFIG_PFAULT */
s390/fault: merge report_user_fault implementations We have two close to identical report_user_fault functions. Add a parameter to one and get rid of the other one in order to reduce code duplication. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-02-24 21:27:46 +08:00
void report_user_fault(struct pt_regs *regs, long signr, int is_mm_fault);
s390/mm: tag normal pages vs pages used in page tables The ESSA instruction has a new option that allows to tag pages that are not used as a page table. Without the tag the hypervisor has to assume that any guest page could be used in a page table inside the guest. This forces the hypervisor to flush all guest TLB entries whenever a host page table entry is invalidated. With the tag the host can skip the TLB flush if the page is tagged as normal page. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-14 18:56:01 +08:00
void cmma_init(void);
void cmma_init_nodat(void);
Disintegrate asm/system.h for S390 Disintegrate asm/system.h for S390. Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-s390@vger.kernel.org
2012-03-29 01:30:02 +08:00
extern void (*_machine_restart)(char *command);
extern void (*_machine_halt)(void);
extern void (*_machine_power_off)(void);
[PATCH] s390: add #ifdef __KERNEL__ to asm-s390/setup.h Based on a patch from Maximilian Attems <maks@sternwelten.at> . Nothing in asm-s390/setup.h is of interest for user space. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 09:56:03 +08:00
#else /* __ASSEMBLY__ */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IPL_DEVICE 0x10400
#define INITRD_START 0x10408
#define INITRD_SIZE 0x10410
[S390] kdump backend code This patch provides the architecture specific part of the s390 kdump support. Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-10-30 22:16:40 +08:00
#define OLDMEM_BASE 0x10418
#define OLDMEM_SIZE 0x10420
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define COMMAND_LINE 0x10480
[PATCH] s390: add #ifdef __KERNEL__ to asm-s390/setup.h Based on a patch from Maximilian Attems <maks@sternwelten.at> . Nothing in asm-s390/setup.h is of interest for user space. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-12 09:56:03 +08:00
#endif /* __ASSEMBLY__ */
#endif /* _ASM_S390_SETUP_H */