openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/mmc/core/Kconfig

83 lines
2.4 KiB
Plaintext
Raw Normal View History

mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 22:00:02 +08:00
#
# MMC core configuration
#
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
config PWRSEQ_EMMC
tristate "HW reset support for eMMC"
default y
depends on OF
help
This selects Hardware reset support aka pwrseq-emmc for eMMC
devices. By default this option is set to y.
This driver can also be built as a module. If so, the module
will be called pwrseq_emmc.
mmc: pwrseq: add support for Marvell SD8787 chip Allow power sequencing for the Marvell SD8787 Wifi/BT chip. This can be abstracted to other chipsets if needed in the future. Cc: Tony Lindgren <tony@atomide.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-01-24 11:08:30 +08:00
config PWRSEQ_SD8787
tristate "HW reset support for SD8787 BT + Wifi module"
mmc: core: Allow building PWRSEQ_SD8787 with LIBERTAS_SDIO The sd8686 "libertas" SDIO adapter's power is controlled with WLAN_RST and WLAN_PD pins -- pretty much the same way as sd8787. Allow building the power sequencing driver along with the libertas Wi-Fi driver. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-24 16:56:32 +08:00
depends on OF && (MWIFIEX || BT_MRVL_SDIO || LIBERTAS_SDIO)
mmc: pwrseq: add support for Marvell SD8787 chip Allow power sequencing for the Marvell SD8787 Wifi/BT chip. This can be abstracted to other chipsets if needed in the future. Cc: Tony Lindgren <tony@atomide.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-01-24 11:08:30 +08:00
help
This selects hardware reset support for the SD8787 BT + Wifi
module. By default this option is set to n.
This driver can also be built as a module. If so, the module
will be called pwrseq_sd8787.
mmc: pwrseq: convert to proper platform device simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-04-14 21:02:16 +08:00
config PWRSEQ_SIMPLE
tristate "Simple HW reset support for MMC"
default y
depends on OF
help
This selects simple hardware reset support aka pwrseq-simple for MMC
devices. By default this option is set to y.
This driver can also be built as a module. If so, the module
will be called pwrseq_simple.
mmc: block: Move files to core Once upon a time it made sense to keep the mmc block device driver and its related code, in its own directory called card. Over time, more an more functions/structures have become shared through generic mmc header files, between the core and the card directory. In other words, the relationship between them has become closer. By sharing functions/structures via generic header files, it becomes easy for outside users to abuse them. In a way to avoid that from happen, let's move the files from card directory into the core directory, as it enables us to move definitions of functions/structures into mmc core specific header files. Note, this is only the first step in providing a cleaner mmc interface for outside users. Following changes will do the actual cleanup, as that is not part of this change. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-08 18:23:49 +08:00
config MMC_BLOCK
tristate "MMC block device driver"
depends on BLOCK
default y
help
Say Y here to enable the MMC block device driver support.
This provides a block device driver, which you can use to
mount the filesystem. Almost everyone wishing MMC support
should say Y or M here.
config MMC_BLOCK_MINORS
int "Number of minors per block device"
depends on MMC_BLOCK
range 4 256
default 8
help
Number of minors per block device. One is needed for every
partition on the disk (plus one for the whole disk).
Number of total MMC minors available is 256, so your number
of supported block devices will be limited to 256 divided
by this number.
Default is 8 to be backwards compatible with previous
hardwired device numbering.
If unsure, say 8 here.
config SDIO_UART
tristate "SDIO UART/GPS class support"
depends on TTY
help
SDIO function driver for SDIO cards that implements the UART
class, as well as the GPS class which appears like a UART.
config MMC_TEST
tristate "MMC host test driver"
help
Development driver that performs a series of reads and writes
to a memory card in order to expose certain well known bugs
in host controllers. The tests are executed by writing to the
"test" file in debugfs under each card. Note that whatever is
on your card will be overwritten by these tests.
This driver is only of interest to those developing or
testing a host driver. Most people should say N here.