linux/drivers/tty/pty.c

959 lines
24 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/fcntl.h>
#include <linux/sched/signal.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/uaccess.h>
#include <linux/bitops.h>
#include <linux/devpts_fs.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/mount.h>
#include <linux/file.h>
#include <linux/ioctl.h>
#undef TTY_DEBUG_HANGUP
#ifdef TTY_DEBUG_HANGUP
# define tty_debug_hangup(tty, f, args...) tty_debug(tty, f, ##args)
#else
# define tty_debug_hangup(tty, f, args...) do {} while (0)
#endif
#ifdef CONFIG_UNIX98_PTYS
static struct tty_driver *ptm_driver;
static struct tty_driver *pts_driver;
static DEFINE_MUTEX(devpts_mutex);
#endif
static void pty_close(struct tty_struct *tty, struct file *filp)
{
BUG_ON(!tty);
if (tty->driver->subtype == PTY_TYPE_MASTER)
WARN_ON(tty->count > 1);
else {
if (tty_io_error(tty))
return;
if (tty->count > 2)
return;
}
set_bit(TTY_IO_ERROR, &tty->flags);
wake_up_interruptible(&tty->read_wait);
wake_up_interruptible(&tty->write_wait);
spin_lock_irq(&tty->ctrl_lock);
tty->packet = 0;
spin_unlock_irq(&tty->ctrl_lock);
/* Review - krefs on tty_link ?? */
if (!tty->link)
return;
set_bit(TTY_OTHER_CLOSED, &tty->link->flags);
wake_up_interruptible(&tty->link->read_wait);
wake_up_interruptible(&tty->link->write_wait);
if (tty->driver->subtype == PTY_TYPE_MASTER) {
set_bit(TTY_OTHER_CLOSED, &tty->flags);
#ifdef CONFIG_UNIX98_PTYS
if (tty->driver == ptm_driver) {
mutex_lock(&devpts_mutex);
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
if (tty->link->driver_data)
devpts_pty_kill(tty->link->driver_data);
mutex_unlock(&devpts_mutex);
}
#endif
tty_vhangup(tty->link);
}
}
/*
* The unthrottle routine is called by the line discipline to signal
* that it can receive more characters. For PTY's, the TTY_THROTTLED
* flag is always set, to force the line discipline to always call the
* unthrottle routine when there are fewer than TTY_THRESHOLD_UNTHROTTLE
* characters in the queue. This is necessary since each time this
* happens, we need to wake up any sleeping processes that could be
* (1) trying to send data to the pty, or (2) waiting in wait_until_sent()
* for the pty buffer to be drained.
*/
static void pty_unthrottle(struct tty_struct *tty)
{
tty_wakeup(tty->link);
set_bit(TTY_THROTTLED, &tty->flags);
}
/**
* pty_write - write to a pty
* @tty: the tty we write from
* @buf: kernel buffer of data
* @count: bytes to write
*
* Our "hardware" write method. Data is coming from the ldisc which
* may be in a non sleeping state. We simply throw this at the other
* end of the link as if we were an IRQ handler receiving stuff for
* the other side of the pty/tty pair.
*/
static int pty_write(struct tty_struct *tty, const unsigned char *buf, int c)
{
struct tty_struct *to = tty->link;
tty: Fix data race in tty_insert_flip_string_fixed_flag Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by: DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30 23:27:04 +08:00
unsigned long flags;
if (tty->stopped)
return 0;
if (c > 0) {
tty: Fix data race in tty_insert_flip_string_fixed_flag Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by: DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30 23:27:04 +08:00
spin_lock_irqsave(&to->port->lock, flags);
/* Stuff the data into the input queue of the other end */
c = tty_insert_flip_string(to->port, buf, c);
/* And shovel */
if (c)
tty_flip_buffer_push(to->port);
tty: Fix data race in tty_insert_flip_string_fixed_flag Unlike normal serials, in pty layer, there is no guarantee that multiple threads don't insert input characters at the same time. If it is happened, tty_insert_flip_string_fixed_flag can be executed concurrently. This can lead slab out-of-bounds write in tty_insert_flip_string_fixed_flag. Call sequences are as follows. CPU0 CPU1 n_tty_ioctl_helper n_tty_ioctl_helper __start_tty tty_send_xchar tty_wakeup pty_write n_hdlc_tty_wakeup tty_insert_flip_string n_hdlc_send_frames tty_insert_flip_string_fixed_flag pty_write tty_insert_flip_string tty_insert_flip_string_fixed_flag To fix the race, acquire port->lock in pty_write() before it inserts input characters to tty buffer. It prevents multiple threads from inserting input characters concurrently. The crash log is as follows: BUG: KASAN: slab-out-of-bounds in tty_insert_flip_string_fixed_flag+0xb5/ 0x130 drivers/tty/tty_buffer.c:316 at addr ffff880114fcc121 Write of size 1792 by task syz-executor0/30017 CPU: 1 PID: 30017 Comm: syz-executor0 Not tainted 4.8.0 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 0000000000000000 ffff88011638f888 ffffffff81694cc3 ffff88007d802140 ffff880114fcb300 ffff880114fcc300 ffff880114fcb300 ffff88011638f8b0 ffffffff8130075c ffff88011638f940 ffff88007d802140 ffff880194fcc121 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0xb3/0x110 lib/dump_stack.c:51 kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 print_address_description mm/kasan/report.c:194 [inline] kasan_report_error+0x1f7/0x4e0 mm/kasan/report.c:283 kasan_report+0x36/0x40 mm/kasan/report.c:303 check_memory_region_inline mm/kasan/kasan.c:292 [inline] check_memory_region+0x13e/0x1a0 mm/kasan/kasan.c:299 memcpy+0x37/0x50 mm/kasan/kasan.c:335 tty_insert_flip_string_fixed_flag+0xb5/0x130 drivers/tty/tty_buffer.c:316 tty_insert_flip_string include/linux/tty_flip.h:35 [inline] pty_write+0x7f/0xc0 drivers/tty/pty.c:115 n_hdlc_send_frames+0x1d4/0x3b0 drivers/tty/n_hdlc.c:419 n_hdlc_tty_wakeup+0x73/0xa0 drivers/tty/n_hdlc.c:496 tty_wakeup+0x92/0xb0 drivers/tty/tty_io.c:601 __start_tty.part.26+0x66/0x70 drivers/tty/tty_io.c:1018 __start_tty+0x34/0x40 drivers/tty/tty_io.c:1013 n_tty_ioctl_helper+0x146/0x1e0 drivers/tty/tty_ioctl.c:1138 n_hdlc_tty_ioctl+0xb3/0x2b0 drivers/tty/n_hdlc.c:794 tty_ioctl+0xa85/0x16d0 drivers/tty/tty_io.c:2992 vfs_ioctl fs/ioctl.c:43 [inline] do_vfs_ioctl+0x13e/0xba0 fs/ioctl.c:679 SYSC_ioctl fs/ioctl.c:694 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 entry_SYSCALL_64_fastpath+0x1f/0xbd Signed-off-by: DaeRyong Jeong <threeearcat@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30 23:27:04 +08:00
spin_unlock_irqrestore(&to->port->lock, flags);
}
return c;
}
/**
* pty_write_room - write space
* @tty: tty we are writing from
*
* Report how many bytes the ldisc can send into the queue for
* the other device.
*/
static int pty_write_room(struct tty_struct *tty)
{
if (tty->stopped)
return 0;
return tty_buffer_space_avail(tty->link->port);
}
/**
* pty_chars_in_buffer - characters currently in our tx queue
* @tty: our tty
*
* Report how much we have in the transmit queue. As everything is
* instantly at the other end this is easy to implement.
*/
static int pty_chars_in_buffer(struct tty_struct *tty)
{
return 0;
}
/* Set the lock flag on a pty */
static int pty_set_lock(struct tty_struct *tty, int __user *arg)
{
int val;
if (get_user(val, arg))
return -EFAULT;
if (val)
set_bit(TTY_PTY_LOCK, &tty->flags);
else
clear_bit(TTY_PTY_LOCK, &tty->flags);
return 0;
}
static int pty_get_lock(struct tty_struct *tty, int __user *arg)
{
int locked = test_bit(TTY_PTY_LOCK, &tty->flags);
return put_user(locked, arg);
}
/* Set the packet mode on a pty */
static int pty_set_pktmode(struct tty_struct *tty, int __user *arg)
{
int pktmode;
if (get_user(pktmode, arg))
return -EFAULT;
spin_lock_irq(&tty->ctrl_lock);
if (pktmode) {
if (!tty->packet) {
tty->link->ctrl_status = 0;
smp_mb();
tty->packet = 1;
}
} else
tty->packet = 0;
spin_unlock_irq(&tty->ctrl_lock);
return 0;
}
/* Get the packet mode of a pty */
static int pty_get_pktmode(struct tty_struct *tty, int __user *arg)
{
int pktmode = tty->packet;
return put_user(pktmode, arg);
}
tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 01:14:49 +08:00
/* Send a signal to the slave */
static int pty_signal(struct tty_struct *tty, int sig)
{
struct pid *pgrp;
if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP)
return -EINVAL;
tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 01:14:49 +08:00
if (tty->link) {
pgrp = tty_get_pgrp(tty->link);
if (pgrp)
kill_pgrp(pgrp, sig, 1);
tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 01:14:49 +08:00
put_pid(pgrp);
}
return 0;
}
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
if (!to)
return;
tty: pty: Fix ldisc flush after userspace become aware of the data already While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da12e7 ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da12e7 ("pty: Fix buffer flush deadlock") CC: stable@vger.kernel.org # v4.0+ Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-22 19:37:08 +08:00
tty_buffer_flush(to, NULL);
if (to->packet) {
spin_lock_irq(&tty->ctrl_lock);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
wake_up_interruptible(&to->read_wait);
spin_unlock_irq(&tty->ctrl_lock);
}
}
static int pty_open(struct tty_struct *tty, struct file *filp)
{
if (!tty || !tty->link)
return -ENODEV;
if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
goto out;
if (test_bit(TTY_PTY_LOCK, &tty->link->flags))
goto out;
if (tty->driver->subtype == PTY_TYPE_SLAVE && tty->link->count != 1)
goto out;
clear_bit(TTY_IO_ERROR, &tty->flags);
clear_bit(TTY_OTHER_CLOSED, &tty->link->flags);
set_bit(TTY_THROTTLED, &tty->flags);
return 0;
out:
set_bit(TTY_IO_ERROR, &tty->flags);
return -EIO;
}
static void pty_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
/* See if packet mode change of state. */
if (tty->link && tty->link->packet) {
int extproc = (old_termios->c_lflag & EXTPROC) | L_EXTPROC(tty);
int old_flow = ((old_termios->c_iflag & IXON) &&
(old_termios->c_cc[VSTOP] == '\023') &&
(old_termios->c_cc[VSTART] == '\021'));
int new_flow = (I_IXON(tty) &&
STOP_CHAR(tty) == '\023' &&
START_CHAR(tty) == '\021');
if ((old_flow != new_flow) || extproc) {
spin_lock_irq(&tty->ctrl_lock);
if (old_flow != new_flow) {
tty->ctrl_status &= ~(TIOCPKT_DOSTOP | TIOCPKT_NOSTOP);
if (new_flow)
tty->ctrl_status |= TIOCPKT_DOSTOP;
else
tty->ctrl_status |= TIOCPKT_NOSTOP;
}
if (extproc)
tty->ctrl_status |= TIOCPKT_IOCTL;
spin_unlock_irq(&tty->ctrl_lock);
wake_up_interruptible(&tty->link->read_wait);
}
}
tty->termios.c_cflag &= ~(CSIZE | PARENB);
tty->termios.c_cflag |= (CS8 | CREAD);
}
/**
* pty_do_resize - resize event
* @tty: tty being resized
* @ws: window size being set.
*
* Update the termios variables and send the necessary signals to
* peform a terminal resize correctly
*/
static int pty_resize(struct tty_struct *tty, struct winsize *ws)
{
struct pid *pgrp, *rpgrp;
struct tty_struct *pty = tty->link;
/* For a PTY we need to lock the tty side */
tty: Fix lock order in tty_do_resize() Commits 6a1c0680cf3ba94356ecd58833e1540c93472a57 and 9356b535fcb71db494fc434acceb79f56d15bda2, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25 04:43:51 +08:00
mutex_lock(&tty->winsize_mutex);
if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
goto done;
/* Signal the foreground process group of both ptys */
pgrp = tty_get_pgrp(tty);
rpgrp = tty_get_pgrp(pty);
if (pgrp)
kill_pgrp(pgrp, SIGWINCH, 1);
if (rpgrp != pgrp && rpgrp)
kill_pgrp(rpgrp, SIGWINCH, 1);
put_pid(pgrp);
put_pid(rpgrp);
tty->winsize = *ws;
pty->winsize = *ws; /* Never used so will go away soon */
done:
tty: Fix lock order in tty_do_resize() Commits 6a1c0680cf3ba94356ecd58833e1540c93472a57 and 9356b535fcb71db494fc434acceb79f56d15bda2, respectively 'tty: Convert termios_mutex to termios_rwsem' and 'n_tty: Access termios values safely' introduced a circular lock dependency with console_lock and termios_rwsem. The lockdep report [1] shows that n_tty_write() will attempt to claim console_lock while holding the termios_rwsem, whereas tty_do_resize() may already hold the console_lock while claiming the termios_rwsem. Since n_tty_write() and tty_do_resize() do not contend over the same data -- the tty->winsize structure -- correct the lock dependency by introducing a new lock which specifically serializes access to tty->winsize only. [1] Lockdep report ====================================================== [ INFO: possible circular locking dependency detected ] 3.10.0-0+tip-xeon+lockdep #0+tip Not tainted ------------------------------------------------------- modprobe/277 is trying to acquire lock: (&tty->termios_rwsem){++++..}, at: [<ffffffff81452656>] tty_do_resize+0x36/0xe0 but task is already holding lock: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 ((fb_notifier_list).rwsem){.+.+.+}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b797>] down_read+0x47/0x5c [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #1 (console_lock){+.+.+.}: [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff810430a7>] console_lock+0x77/0x80 [<ffffffff8146b2a1>] con_flush_chars+0x31/0x50 [<ffffffff8145780c>] n_tty_write+0x1ec/0x4d0 [<ffffffff814541b9>] tty_write+0x159/0x2e0 [<ffffffff814543f5>] redirected_tty_write+0xb5/0xc0 [<ffffffff811ab9d5>] vfs_write+0xc5/0x1f0 [<ffffffff811abec5>] SyS_write+0x55/0xa0 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b -> #0 (&tty->termios_rwsem){++++..}: [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: Chain exists of: &tty->termios_rwsem --> console_lock --> (fb_notifier_list).rwsem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((fb_notifier_list).rwsem); lock(console_lock); lock((fb_notifier_list).rwsem); lock(&tty->termios_rwsem); *** DEADLOCK *** 7 locks held by modprobe/277: #0: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b5b>] __driver_attach+0x5b/0xb0 #1: (&__lockdep_no_validate__){......}, at: [<ffffffff81497b69>] __driver_attach+0x69/0xb0 #2: (drm_global_mutex){+.+.+.}, at: [<ffffffffa008a6dd>] drm_get_pci_dev+0xbd/0x2a0 [drm] #3: (registration_lock){+.+.+.}, at: [<ffffffff813d93f5>] register_framebuffer+0x25/0x320 #4: (&fb_info->lock){+.+.+.}, at: [<ffffffff813d8116>] lock_fb_info+0x26/0x60 #5: (console_lock){+.+.+.}, at: [<ffffffff813d95a4>] register_framebuffer+0x1d4/0x320 #6: ((fb_notifier_list).rwsem){.+.+.+}, at: [<ffffffff8107aac6>] __blocking_notifier_call_chain+0x56/0xc0 stack backtrace: CPU: 0 PID: 277 Comm: modprobe Not tainted 3.10.0-0+tip-xeon+lockdep #0+tip Hardware name: Dell Inc. Precision WorkStation T5400 /0RW203, BIOS A11 04/30/2012 ffffffff8213e5e0 ffff8802aa2fb298 ffffffff81755f19 ffff8802aa2fb2e8 ffffffff8174f506 ffff8802aa2fa000 ffff8802aa2fb378 ffff8802aa2ea8e8 ffff8802aa2ea910 ffff8802aa2ea8e8 0000000000000006 0000000000000007 Call Trace: [<ffffffff81755f19>] dump_stack+0x19/0x1b [<ffffffff8174f506>] print_circular_bug+0x1fb/0x20c [<ffffffff810b65c3>] __lock_acquire+0x1c43/0x1d30 [<ffffffff810b775e>] ? mark_held_locks+0xae/0x120 [<ffffffff810b78d5>] ? trace_hardirqs_on_caller+0x105/0x1d0 [<ffffffff810b6d62>] lock_acquire+0x92/0x1f0 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff8175b724>] down_write+0x44/0x70 [<ffffffff81452656>] ? tty_do_resize+0x36/0xe0 [<ffffffff81452656>] tty_do_resize+0x36/0xe0 [<ffffffff8146c841>] vc_do_resize+0x3e1/0x4c0 [<ffffffff8146c99f>] vc_resize+0x1f/0x30 [<ffffffff813e4535>] fbcon_init+0x385/0x5a0 [<ffffffff8146a4bc>] visual_init+0xbc/0x120 [<ffffffff8146cd13>] do_bind_con_driver+0x163/0x320 [<ffffffff8146cfa1>] do_take_over_console+0x61/0x70 [<ffffffff813e2b93>] do_fbcon_takeover+0x63/0xc0 [<ffffffff813e67a5>] fbcon_event_notify+0x715/0x820 [<ffffffff81762f9d>] notifier_call_chain+0x5d/0x110 [<ffffffff8107aadc>] __blocking_notifier_call_chain+0x6c/0xc0 [<ffffffff8107ab46>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff813d7c0b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff813d95b2>] register_framebuffer+0x1e2/0x320 [<ffffffffa01043e1>] drm_fb_helper_initial_config+0x371/0x540 [drm_kms_helper] [<ffffffff8173cbcb>] ? kmemleak_alloc+0x5b/0xc0 [<ffffffff81198874>] ? kmem_cache_alloc_trace+0x104/0x290 [<ffffffffa01035e1>] ? drm_fb_helper_single_add_all_connectors+0x81/0xf0 [drm_kms_helper] [<ffffffffa01bcb05>] nouveau_fbcon_init+0x105/0x140 [nouveau] [<ffffffffa01ad0af>] nouveau_drm_load+0x43f/0x610 [nouveau] [<ffffffffa008a79e>] drm_get_pci_dev+0x17e/0x2a0 [drm] [<ffffffffa01ad4da>] nouveau_drm_probe+0x25a/0x2a0 [nouveau] [<ffffffff8175f162>] ? _raw_spin_unlock_irqrestore+0x42/0x80 [<ffffffff813b13db>] local_pci_probe+0x4b/0x80 [<ffffffff813b1701>] pci_device_probe+0x111/0x120 [<ffffffff814977eb>] driver_probe_device+0x8b/0x3a0 [<ffffffff81497bab>] __driver_attach+0xab/0xb0 [<ffffffff81497b00>] ? driver_probe_device+0x3a0/0x3a0 [<ffffffff814956ad>] bus_for_each_dev+0x5d/0xa0 [<ffffffff814971fe>] driver_attach+0x1e/0x20 [<ffffffff81496cc1>] bus_add_driver+0x111/0x290 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff814982b7>] driver_register+0x77/0x170 [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffff813b0454>] __pci_register_driver+0x64/0x70 [<ffffffffa008a9da>] drm_pci_init+0x11a/0x130 [drm] [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a000>] ? 0xffffffffa0229fff [<ffffffffa022a04d>] nouveau_drm_init+0x4d/0x1000 [nouveau] [<ffffffff810002ea>] do_one_initcall+0xea/0x1a0 [<ffffffff810c54cb>] load_module+0x123b/0x1bf0 [<ffffffff81399a50>] ? ddebug_proc_open+0xb0/0xb0 [<ffffffff813855ae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff810c5f57>] SyS_init_module+0xd7/0x120 [<ffffffff817677c2>] system_call_fastpath+0x16/0x1b Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-25 04:43:51 +08:00
mutex_unlock(&tty->winsize_mutex);
return 0;
}
/**
* pty_start - start() handler
* pty_stop - stop() handler
* @tty: tty being flow-controlled
*
* Propagates the TIOCPKT status to the master pty.
*
* NB: only the master pty can be in packet mode so only the slave
* needs start()/stop() handlers
*/
static void pty_start(struct tty_struct *tty)
{
unsigned long flags;
if (tty->link && tty->link->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status &= ~TIOCPKT_STOP;
tty->ctrl_status |= TIOCPKT_START;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
wake_up_interruptible_poll(&tty->link->read_wait, EPOLLIN);
}
}
static void pty_stop(struct tty_struct *tty)
{
unsigned long flags;
if (tty->link && tty->link->packet) {
spin_lock_irqsave(&tty->ctrl_lock, flags);
tty->ctrl_status &= ~TIOCPKT_START;
tty->ctrl_status |= TIOCPKT_STOP;
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
wake_up_interruptible_poll(&tty->link->read_wait, EPOLLIN);
}
}
/**
* pty_common_install - set up the pty pair
* @driver: the pty driver
* @tty: the tty being instantiated
* @legacy: true if this is BSD style
*
* Perform the initial set up for the tty/pty pair. Called from the
* tty layer when the port is first opened.
*
* Locking: the caller must hold the tty_mutex
*/
static int pty_common_install(struct tty_driver *driver, struct tty_struct *tty,
bool legacy)
{
struct tty_struct *o_tty;
struct tty_port *ports[2];
int idx = tty->index;
int retval = -ENOMEM;
/* Opening the slave first has always returned -EIO */
if (driver->subtype != PTY_TYPE_MASTER)
return -EIO;
ports[0] = kmalloc(sizeof **ports, GFP_KERNEL);
ports[1] = kmalloc(sizeof **ports, GFP_KERNEL);
if (!ports[0] || !ports[1])
goto err;
if (!try_module_get(driver->other->owner)) {
/* This cannot in fact currently happen */
goto err;
}
o_tty = alloc_tty_struct(driver->other, idx);
if (!o_tty)
goto err_put_module;
tty_set_lock_subclass(o_tty);
lockdep_set_subclass(&o_tty->termios_rwsem, TTY_LOCK_SLAVE);
if (legacy) {
/* We always use new tty termios data so we can do this
the easy way .. */
tty_init_termios(tty);
tty_init_termios(o_tty);
driver->other->ttys[idx] = o_tty;
driver->ttys[idx] = tty;
} else {
memset(&tty->termios_locked, 0, sizeof(tty->termios_locked));
tty->termios = driver->init_termios;
memset(&o_tty->termios_locked, 0, sizeof(tty->termios_locked));
o_tty->termios = driver->other->init_termios;
}
/*
* Everything allocated ... set up the o_tty structure.
*/
tty_driver_kref_get(driver->other);
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
tty_port_init(ports[0]);
tty_port_init(ports[1]);
tty_buffer_set_limit(ports[0], 8192);
tty_buffer_set_limit(ports[1], 8192);
o_tty->port = ports[0];
tty->port = ports[1];
o_tty->port->itty = o_tty;
tty_buffer_set_lock_subclass(o_tty->port);
tty_driver_kref_get(driver);
tty->count++;
o_tty->count++;
return 0;
err_put_module:
module_put(driver->other->owner);
err:
kfree(ports[0]);
kfree(ports[1]);
return retval;
}
static void pty_cleanup(struct tty_struct *tty)
{
tty_port_put(tty->port);
}
/* Traditional BSD devices */
#ifdef CONFIG_LEGACY_PTYS
static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
{
return pty_common_install(driver, tty, true);
}
static void pty_remove(struct tty_driver *driver, struct tty_struct *tty)
{
struct tty_struct *pair = tty->link;
driver->ttys[tty->index] = NULL;
if (pair)
pair->driver->ttys[pair->index] = NULL;
}
static int pty_bsd_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *) arg);
case TIOCGPTLCK: /* Get PT Lock status */
return pty_get_lock(tty, (int __user *)arg);
case TIOCPKT: /* Set PT packet mode */
return pty_set_pktmode(tty, (int __user *)arg);
case TIOCGPKT: /* Get PT packet mode */
return pty_get_pktmode(tty, (int __user *)arg);
tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 01:14:49 +08:00
case TIOCSIG: /* Send signal to other side of pty */
return pty_signal(tty, (int) arg);
case TIOCGPTN: /* TTY returns ENOTTY, but glibc expects EINVAL here */
return -EINVAL;
}
return -ENOIOCTLCMD;
}
static long pty_bsd_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
/*
* PTY ioctls don't require any special translation between 32-bit and
* 64-bit userspace, they are already compatible.
*/
return pty_bsd_ioctl(tty, cmd, arg);
}
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
/*
* not really modular, but the easiest way to keep compat with existing
* bootargs behaviour is to continue using module_param here.
*/
module_param(legacy_count, int, 0);
/*
* The master side of a pty can do TIOCSPTLCK and thus
* has pty_bsd_ioctl.
*/
static const struct tty_operations master_pty_ops_bsd = {
.install = pty_install,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.ioctl = pty_bsd_ioctl,
.compat_ioctl = pty_bsd_compat_ioctl,
.cleanup = pty_cleanup,
.resize = pty_resize,
.remove = pty_remove
};
static const struct tty_operations slave_pty_ops_bsd = {
.install = pty_install,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.cleanup = pty_cleanup,
.resize = pty_resize,
.start = pty_start,
.stop = pty_stop,
.remove = pty_remove
};
static void __init legacy_pty_init(void)
{
struct tty_driver *pty_driver, *pty_slave_driver;
if (legacy_count <= 0)
return;
pty_driver = tty_alloc_driver(legacy_count,
TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_ALLOC);
if (IS_ERR(pty_driver))
panic("Couldn't allocate pty driver");
pty_slave_driver = tty_alloc_driver(legacy_count,
TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_ALLOC);
if (IS_ERR(pty_slave_driver))
panic("Couldn't allocate pty slave driver");
pty_driver->driver_name = "pty_master";
pty_driver->name = "pty";
pty_driver->major = PTY_MASTER_MAJOR;
pty_driver->minor_start = 0;
pty_driver->type = TTY_DRIVER_TYPE_PTY;
pty_driver->subtype = PTY_TYPE_MASTER;
pty_driver->init_termios = tty_std_termios;
pty_driver->init_termios.c_iflag = 0;
pty_driver->init_termios.c_oflag = 0;
pty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_driver->init_termios.c_lflag = 0;
pty_driver->init_termios.c_ispeed = 38400;
pty_driver->init_termios.c_ospeed = 38400;
pty_driver->other = pty_slave_driver;
tty_set_operations(pty_driver, &master_pty_ops_bsd);
pty_slave_driver->driver_name = "pty_slave";
pty_slave_driver->name = "ttyp";
pty_slave_driver->major = PTY_SLAVE_MAJOR;
pty_slave_driver->minor_start = 0;
pty_slave_driver->type = TTY_DRIVER_TYPE_PTY;
pty_slave_driver->subtype = PTY_TYPE_SLAVE;
pty_slave_driver->init_termios = tty_std_termios;
pty_slave_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pty_slave_driver->init_termios.c_ispeed = 38400;
pty_slave_driver->init_termios.c_ospeed = 38400;
pty_slave_driver->other = pty_driver;
tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
if (tty_register_driver(pty_driver))
panic("Couldn't register pty driver");
if (tty_register_driver(pty_slave_driver))
panic("Couldn't register pty slave driver");
}
#else
static inline void legacy_pty_init(void) { }
#endif
/* Unix98 devices */
#ifdef CONFIG_UNIX98_PTYS
static struct cdev ptmx_cdev;
/**
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
* ptm_open_peer - open the peer of a pty
* @master: the open struct file of the ptmx device node
* @tty: the master of the pty being opened
* @flags: the flags for open
*
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
* Provide a race free way for userspace to open the slave end of a pty
* (where they have the master fd and cannot access or trust the mount
* namespace /dev/pts was mounted inside).
*/
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
int ptm_open_peer(struct file *master, struct tty_struct *tty, int flags)
{
int fd = -1;
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
struct file *filp;
int retval = -EINVAL;
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
struct path path;
if (tty->driver != ptm_driver)
return -EIO;
fd = get_unused_fd_flags(flags);
if (fd < 0) {
retval = fd;
goto err;
}
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
/* Compute the slave's path */
path.mnt = devpts_mntget(master, tty->driver_data);
if (IS_ERR(path.mnt)) {
retval = PTR_ERR(path.mnt);
goto err_put;
}
path.dentry = tty->link->driver_data;
filp = dentry_open(&path, flags, current_cred());
mntput(path.mnt);
if (IS_ERR(filp)) {
retval = PTR_ERR(filp);
goto err_put;
}
fd_install(fd, filp);
return fd;
err_put:
put_unused_fd(fd);
err:
return retval;
}
static int pty_unix98_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case TIOCSPTLCK: /* Set PT Lock (disallow slave open) */
return pty_set_lock(tty, (int __user *)arg);
case TIOCGPTLCK: /* Get PT Lock status */
return pty_get_lock(tty, (int __user *)arg);
case TIOCPKT: /* Set PT packet mode */
return pty_set_pktmode(tty, (int __user *)arg);
case TIOCGPKT: /* Get PT packet mode */
return pty_get_pktmode(tty, (int __user *)arg);
case TIOCGPTN: /* Get PT Number */
return put_user(tty->index, (unsigned int __user *)arg);
tty: Add EXTPROC support for LINEMODE This patch is against the 2.6.34 source. Paraphrased from the 1989 BSD patch by David Borman @ cray.com: These are the changes needed for the kernel to support LINEMODE in the server. There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. New ioctl: TIOCSIG Generate a signal to processes in the current process group of the pty. There is a new mode for packet driver, the TIOCPKT_IOCTL bit. When packet mode is turned on in the pty, and the EXTPROC bit is set, then whenever the state of the pty is changed, the next read on the master side of the pty will have the TIOCPKT_IOCTL bit set. This allows the process on the server side of the pty to know when the state of the terminal has changed; it can then issue the appropriate ioctl to retrieve the new state. Since the original BSD patches accompanied the source code for telnet I've left that reference here, but obviously the feature is useful for any remote terminal protocol, including ssh. The corresponding feature has existed in the BSD tty driver since 1989. For historical reference, a good copy of the relevant files can be found here: http://anonsvn.mit.edu/viewvc/krb5/trunk/src/appl/telnet/?pathrev=17741 Signed-off-by: Howard Chu <hyc@symas.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 01:14:49 +08:00
case TIOCSIG: /* Send signal to other side of pty */
return pty_signal(tty, (int) arg);
}
return -ENOIOCTLCMD;
}
static long pty_unix98_compat_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
/*
* PTY ioctls don't require any special translation between 32-bit and
* 64-bit userspace, they are already compatible.
*/
return pty_unix98_ioctl(tty, cmd, arg);
}
/**
* ptm_unix98_lookup - find a pty master
* @driver: ptm driver
* @idx: tty index
*
* Look up a pty master device. Called under the tty_mutex for now.
* This provides our locking.
*/
static struct tty_struct *ptm_unix98_lookup(struct tty_driver *driver,
devpts: more pty driver interface cleanups This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26 11:04:08 +08:00
struct file *file, int idx)
{
/* Master must be open via /dev/ptmx */
return ERR_PTR(-EIO);
}
/**
* pts_unix98_lookup - find a pty slave
* @driver: pts driver
* @idx: tty index
*
* Look up a pty master device. Called under the tty_mutex for now.
* This provides our locking for the tty pointer.
*/
static struct tty_struct *pts_unix98_lookup(struct tty_driver *driver,
devpts: more pty driver interface cleanups This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26 11:04:08 +08:00
struct file *file, int idx)
{
struct tty_struct *tty;
mutex_lock(&devpts_mutex);
devpts: more pty driver interface cleanups This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26 11:04:08 +08:00
tty = devpts_get_priv(file->f_path.dentry);
mutex_unlock(&devpts_mutex);
/* Master must be open before slave */
if (!tty)
return ERR_PTR(-EIO);
return tty;
}
static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty)
{
return pty_common_install(driver, tty, false);
}
/* this is called once with whichever end is closed last */
static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty)
{
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
struct pts_fs_info *fsi;
if (tty->driver->subtype == PTY_TYPE_MASTER)
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
fsi = tty->driver_data;
else
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
fsi = tty->link->driver_data;
devpts: fix null pointer dereference on failed memory allocation An ENOMEM when creating a pair tty in tty_ldisc_setup causes a null pointer dereference in devpts_kill_index because tty->link->driver_data is NULL. The oops was triggered with the pty stressor in stress-ng when in a low memory condition. tty_init_dev tries to clean up a tty_ldisc_setup ENOMEM error by calling release_tty, however, this ultimately tries to clean up the NULL pair'd tty in pty_unix98_remove, triggering the Oops. Add check to pty_unix98_remove to only clean up fsi if it is not NULL. Ooops: [ 23.020961] Oops: 0000 [#1] SMP [ 23.020976] Modules linked in: ppdev snd_hda_codec_generic snd_hda_intel snd_hda_codec parport_pc snd_hda_core snd_hwdep parport snd_pcm input_leds joydev snd_timer serio_raw snd soundcore i2c_piix4 mac_hid ib_iser rdma_cm iw_cm ib_cm ib_core configfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi autofs4 btrfs raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel qxl aes_x86_64 ttm lrw gf128mul glue_helper ablk_helper drm_kms_helper cryptd syscopyarea sysfillrect psmouse sysimgblt floppy fb_sys_fops drm pata_acpi jitterentropy_rng drbg ansi_cprng [ 23.020978] CPU: 0 PID: 1452 Comm: stress-ng-pty Not tainted 4.7.0-rc4+ #2 [ 23.020978] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 [ 23.020979] task: ffff88007ba30000 ti: ffff880078ea8000 task.ti: ffff880078ea8000 [ 23.020981] RIP: 0010:[<ffffffff813f11ff>] [<ffffffff813f11ff>] ida_remove+0x1f/0x120 [ 23.020981] RSP: 0018:ffff880078eabb60 EFLAGS: 00010a03 [ 23.020982] RAX: 4444444444444567 RBX: 0000000000000000 RCX: 000000000000001f [ 23.020982] RDX: 000000000000014c RSI: 000000000000026f RDI: 0000000000000000 [ 23.020982] RBP: ffff880078eabb70 R08: 0000000000000004 R09: 0000000000000036 [ 23.020983] R10: 000000000000026f R11: 0000000000000000 R12: 000000000000026f [ 23.020983] R13: 000000000000026f R14: ffff88007c944b40 R15: 000000000000026f [ 23.020984] FS: 00007f9a2f3cc700(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 23.020984] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.020985] CR2: 0000000000000010 CR3: 000000006c81b000 CR4: 00000000001406f0 [ 23.020988] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 23.020988] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 23.020988] Stack: [ 23.020989] 0000000000000000 000000000000026f ffff880078eabb90 ffffffff812a5a99 [ 23.020990] 0000000000000000 00000000fffffff4 ffff880078eabba8 ffffffff814f9cbe [ 23.020991] ffff88007965c800 ffff880078eabbc8 ffffffff814eef43 fffffffffffffff4 [ 23.020991] Call Trace: [ 23.021000] [<ffffffff812a5a99>] devpts_kill_index+0x29/0x50 [ 23.021002] [<ffffffff814f9cbe>] pty_unix98_remove+0x2e/0x50 [ 23.021006] [<ffffffff814eef43>] release_tty+0xb3/0x1b0 [ 23.021007] [<ffffffff814f18d4>] tty_init_dev+0xd4/0x1c0 [ 23.021011] [<ffffffff814f9fae>] ptmx_open+0xae/0x190 [ 23.021013] [<ffffffff812254ef>] chrdev_open+0xbf/0x1b0 [ 23.021015] [<ffffffff8121d973>] do_dentry_open+0x203/0x310 [ 23.021016] [<ffffffff81225430>] ? cdev_put+0x30/0x30 [ 23.021017] [<ffffffff8121ee44>] vfs_open+0x54/0x80 [ 23.021018] [<ffffffff8122b8fc>] ? may_open+0x8c/0x100 [ 23.021019] [<ffffffff8122f26b>] path_openat+0x2eb/0x1440 [ 23.021020] [<ffffffff81230534>] ? putname+0x54/0x60 [ 23.021022] [<ffffffff814f6f97>] ? n_tty_ioctl_helper+0x27/0x100 [ 23.021023] [<ffffffff81231651>] do_filp_open+0x91/0x100 [ 23.021024] [<ffffffff81230596>] ? getname_flags+0x56/0x1f0 [ 23.021026] [<ffffffff8123fc66>] ? __alloc_fd+0x46/0x190 [ 23.021027] [<ffffffff8121f1e4>] do_sys_open+0x124/0x210 [ 23.021028] [<ffffffff8121f2ee>] SyS_open+0x1e/0x20 [ 23.021035] [<ffffffff81845576>] entry_SYSCALL_64_fastpath+0x1e/0xa8 [ 23.021044] Code: 63 28 45 31 e4 eb dd 0f 1f 44 00 00 55 4c 63 d6 48 ba 89 88 88 88 88 88 88 88 4c 89 d0 b9 1f 00 00 00 48 f7 e2 48 89 e5 41 54 53 <8b> 47 10 48 89 fb 8d 3c c5 00 00 00 00 48 c1 ea 09 b8 01 00 00 [ 23.021045] RIP [<ffffffff813f11ff>] ida_remove+0x1f/0x120 [ 23.021045] RSP <ffff880078eabb60> [ 23.021046] CR2: 0000000000000010 Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-20 22:40:27 +08:00
if (fsi) {
devpts_kill_index(fsi, tty->index);
devpts_release(fsi);
}
}
static void pty_show_fdinfo(struct tty_struct *tty, struct seq_file *m)
{
seq_printf(m, "tty-index:\t%d\n", tty->index);
}
static const struct tty_operations ptm_unix98_ops = {
.lookup = ptm_unix98_lookup,
.install = pty_unix98_install,
.remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.ioctl = pty_unix98_ioctl,
.compat_ioctl = pty_unix98_compat_ioctl,
.resize = pty_resize,
.cleanup = pty_cleanup,
.show_fdinfo = pty_show_fdinfo,
};
static const struct tty_operations pty_unix98_ops = {
.lookup = pts_unix98_lookup,
.install = pty_unix98_install,
.remove = pty_unix98_remove,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.write_room = pty_write_room,
.flush_buffer = pty_flush_buffer,
.chars_in_buffer = pty_chars_in_buffer,
.unthrottle = pty_unthrottle,
.set_termios = pty_set_termios,
.start = pty_start,
.stop = pty_stop,
.cleanup = pty_cleanup,
};
/**
* ptmx_open - open a unix 98 pty master
* @inode: inode of device file
* @filp: file pointer to tty
*
* Allocate a unix98 pty master device from the ptmx driver.
*
* Locking: tty_mutex protects the init_dev work. tty->count should
* protect the rest.
* allocated_ptys_lock handles the list of free pty numbers
*/
static int ptmx_open(struct inode *inode, struct file *filp)
{
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
struct pts_fs_info *fsi;
struct tty_struct *tty;
devpts: more pty driver interface cleanups This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26 11:04:08 +08:00
struct dentry *dentry;
int retval;
int index;
nonseekable_open(inode, filp);
/* We refuse fsnotify events on ptmx, since it's a shared resource */
filp->f_mode |= FMODE_NONOTIFY;
retval = tty_alloc_file(filp);
if (retval)
return retval;
Revert "pty: fix the cached path of the pty slave file descriptor in the master" This reverts commit c8c03f1858331e85d397bacccd34ef409aae993c. It turns out that while fixing the ptmx file descriptor to have the correct 'struct path' to the associated slave pty is a really good thing, it breaks some user space tools for a very annoying reason. The problem is that /dev/ptmx and its associated slave pty (/dev/pts/X) are on different mounts. That was what caused us to have the wrong path in the first place (we would mix up the vfsmount of the 'ptmx' node, with the dentry of the pty slave node), but it also means that now while we use the right vfsmount, having the pty master open also keeps the pts mount busy. And it turn sout that that makes 'pbuilder' very unhappy, as noted by Stefan Lippers-Hollmann: "This patch introduces a regression for me when using pbuilder 0.228.7[2] (a helper to build Debian packages in a chroot and to create and update its chroots) when trying to umount /dev/ptmx (inside the chroot) on Debian/ unstable (full log and pbuilder configuration file[3] attached). [...] Setting up build-essential (12.3) ... Processing triggers for libc-bin (2.24-15) ... I: unmounting dev/ptmx filesystem W: Could not unmount dev/ptmx: umount: /var/cache/pbuilder/build/1340/dev/ptmx: target is busy (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1).)" apparently pbuilder tries to unmount the /dev/pts filesystem while still holding at least one master node open, which is arguably not very nice, but we don't break user space even when fixing other bugs. So this commit has to be reverted. I'll try to figure out a way to avoid caching the path to the slave pty in the master pty. The only thing that actually wants that slave pty path is the "TIOCGPTPEER" ioctl, and I think we could just recreate the path at that time. Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Eric W Biederman <ebiederm@xmission.com> Cc: Christian Brauner <christian.brauner@canonical.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-24 09:16:11 +08:00
fsi = devpts_acquire(filp);
devpts: Make each mount of devpts an independent filesystem. The /dev/ptmx device node is changed to lookup the directory entry "pts" in the same directory as the /dev/ptmx device node was opened in. If there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx uses that filesystem. Otherwise the open of /dev/ptmx fails. The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that userspace can now safely depend on each mount of devpts creating a new instance of the filesystem. Each mount of devpts is now a separate and equal filesystem. Reserved ttys are now available to all instances of devpts where the mounter is in the initial mount namespace. A new vfs helper path_pts is introduced that finds a directory entry named "pts" in the directory of the passed in path, and changes the passed in path to point to it. The helper path_pts uses a function path_parent_directory that was factored out of follow_dotdot. In the implementation of devpts: - devpts_mnt is killed as it is no longer meaningful if all mounts of devpts are equal. - pts_sb_from_inode is replaced by just inode->i_sb as all cached inodes in the tty layer are now from the devpts filesystem. - devpts_add_ref is rolled into the new function devpts_ptmx. And the unnecessary inode hold is removed. - devpts_del_ref is renamed devpts_release and reduced to just a deacrivate_super. - The newinstance mount option continues to be accepted but is now ignored. In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as they are never used. Documentation/filesystems/devices.txt is updated to describe the current situation. This has been verified to work properly on openwrt-15.05, centos5, centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3, ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1, slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the caveat that on centos6 and on slackware-14.1 that there wind up being two instances of the devpts filesystem mounted on /dev/pts, the lower copy does not end up getting used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-02 23:29:47 +08:00
if (IS_ERR(fsi)) {
retval = PTR_ERR(fsi);
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
goto out_free_file;
devpts: Make each mount of devpts an independent filesystem. The /dev/ptmx device node is changed to lookup the directory entry "pts" in the same directory as the /dev/ptmx device node was opened in. If there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx uses that filesystem. Otherwise the open of /dev/ptmx fails. The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that userspace can now safely depend on each mount of devpts creating a new instance of the filesystem. Each mount of devpts is now a separate and equal filesystem. Reserved ttys are now available to all instances of devpts where the mounter is in the initial mount namespace. A new vfs helper path_pts is introduced that finds a directory entry named "pts" in the directory of the passed in path, and changes the passed in path to point to it. The helper path_pts uses a function path_parent_directory that was factored out of follow_dotdot. In the implementation of devpts: - devpts_mnt is killed as it is no longer meaningful if all mounts of devpts are equal. - pts_sb_from_inode is replaced by just inode->i_sb as all cached inodes in the tty layer are now from the devpts filesystem. - devpts_add_ref is rolled into the new function devpts_ptmx. And the unnecessary inode hold is removed. - devpts_del_ref is renamed devpts_release and reduced to just a deacrivate_super. - The newinstance mount option continues to be accepted but is now ignored. In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as they are never used. Documentation/filesystems/devices.txt is updated to describe the current situation. This has been verified to work properly on openwrt-15.05, centos5, centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3, ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1, slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the caveat that on centos6 and on slackware-14.1 that there wind up being two instances of the devpts filesystem mounted on /dev/pts, the lower copy does not end up getting used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-02 23:29:47 +08:00
}
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
/* find a device that is not in use. */
mutex_lock(&devpts_mutex);
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
index = devpts_new_index(fsi);
mutex_unlock(&devpts_mutex);
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
retval = index;
if (index < 0)
devpts: Make each mount of devpts an independent filesystem. The /dev/ptmx device node is changed to lookup the directory entry "pts" in the same directory as the /dev/ptmx device node was opened in. If there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx uses that filesystem. Otherwise the open of /dev/ptmx fails. The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that userspace can now safely depend on each mount of devpts creating a new instance of the filesystem. Each mount of devpts is now a separate and equal filesystem. Reserved ttys are now available to all instances of devpts where the mounter is in the initial mount namespace. A new vfs helper path_pts is introduced that finds a directory entry named "pts" in the directory of the passed in path, and changes the passed in path to point to it. The helper path_pts uses a function path_parent_directory that was factored out of follow_dotdot. In the implementation of devpts: - devpts_mnt is killed as it is no longer meaningful if all mounts of devpts are equal. - pts_sb_from_inode is replaced by just inode->i_sb as all cached inodes in the tty layer are now from the devpts filesystem. - devpts_add_ref is rolled into the new function devpts_ptmx. And the unnecessary inode hold is removed. - devpts_del_ref is renamed devpts_release and reduced to just a deacrivate_super. - The newinstance mount option continues to be accepted but is now ignored. In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as they are never used. Documentation/filesystems/devices.txt is updated to describe the current situation. This has been verified to work properly on openwrt-15.05, centos5, centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3, ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1, slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the caveat that on centos6 and on slackware-14.1 that there wind up being two instances of the devpts filesystem mounted on /dev/pts, the lower copy does not end up getting used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-02 23:29:47 +08:00
goto out_put_fsi;
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
mutex_lock(&tty_mutex);
tty = tty_init_dev(ptm_driver, index);
/* The tty returned here is locked so we can safely
drop the mutex */
mutex_unlock(&tty_mutex);
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
retval = PTR_ERR(tty);
if (IS_ERR(tty))
goto out;
/*
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
* From here on out, the tty is "live", and the index and
* fsi will be killed/put by the tty_release()
*/
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
tty->driver_data = fsi;
tty_add_file(tty, filp);
devpts: more pty driver interface cleanups This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-26 11:04:08 +08:00
dentry = devpts_pty_new(fsi, index, tty->link);
if (IS_ERR(dentry)) {
retval = PTR_ERR(dentry);
goto err_release;
}
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
tty->link->driver_data = dentry;
retval = ptm_driver->ops->open(tty, filp);
if (retval)
pty: Repair TIOCGPTPEER The implementation of TIOCGPTPEER has two issues. When /dev/ptmx (as opposed to /dev/pts/ptmx) is opened the wrong vfsmount is passed to dentry_open. Which results in the kernel displaying the wrong pathname for the peer. The second is simply by caching the vfsmount and dentry of the peer it leaves them open, in a way they were not previously Which because of the inreased reference counts can cause unnecessary behaviour differences resulting in regressions. To fix these move the ioctl into tty_io.c at a generic level allowing the ioctl to have access to the struct file on which the ioctl is being called. This allows the path of the slave to be derived when opening the slave through TIOCGPTPEER instead of requiring the path to the slave be cached. Thus removing the need for caching the path. A new function devpts_ptmx_path is factored out of devpts_acquire and used to implement a function devpts_mntget. The new function devpts_mntget takes a filp to perform the lookup on and fsi so that it can confirm that the superblock that is found by devpts_ptmx_path is the proper superblock. v2: Lots of fixes to make the code actually work v3: Suggestions by Linus - Removed the unnecessary initialization of filp in ptm_open_peer - Simplified devpts_ptmx_path as gotos are no longer required [ This is the fix for the issue that was reverted in commit 143c97cc6529, but this time without breaking 'pbuilder' due to increased reference counts - Linus ] Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl") Reported-by: Christian Brauner <christian.brauner@canonical.com> Reported-and-tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-25 04:13:29 +08:00
goto err_release;
tty_debug_hangup(tty, "opening (count=%d)\n", tty->count);
tty_unlock(tty);
return 0;
err_release:
tty_unlock(tty);
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
// This will also put-ref the fsi
tty_release(inode, filp);
return retval;
out:
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
devpts_kill_index(fsi, index);
devpts: Make each mount of devpts an independent filesystem. The /dev/ptmx device node is changed to lookup the directory entry "pts" in the same directory as the /dev/ptmx device node was opened in. If there is a "pts" entry and that entry is a devpts filesystem /dev/ptmx uses that filesystem. Otherwise the open of /dev/ptmx fails. The DEVPTS_MULTIPLE_INSTANCES configuration option is removed, so that userspace can now safely depend on each mount of devpts creating a new instance of the filesystem. Each mount of devpts is now a separate and equal filesystem. Reserved ttys are now available to all instances of devpts where the mounter is in the initial mount namespace. A new vfs helper path_pts is introduced that finds a directory entry named "pts" in the directory of the passed in path, and changes the passed in path to point to it. The helper path_pts uses a function path_parent_directory that was factored out of follow_dotdot. In the implementation of devpts: - devpts_mnt is killed as it is no longer meaningful if all mounts of devpts are equal. - pts_sb_from_inode is replaced by just inode->i_sb as all cached inodes in the tty layer are now from the devpts filesystem. - devpts_add_ref is rolled into the new function devpts_ptmx. And the unnecessary inode hold is removed. - devpts_del_ref is renamed devpts_release and reduced to just a deacrivate_super. - The newinstance mount option continues to be accepted but is now ignored. In devpts_fs.h definitions for when !CONFIG_UNIX98_PTYS are removed as they are never used. Documentation/filesystems/devices.txt is updated to describe the current situation. This has been verified to work properly on openwrt-15.05, centos5, centos6, centos7, debian-6.0.2, debian-7.9, debian-8.2, ubuntu-14.04.3, ubuntu-15.10, fedora23, magia-5, mint-17.3, opensuse-42.1, slackware-14.1, gentoo-20151225 (13.0?), archlinux-2015-12-01. With the caveat that on centos6 and on slackware-14.1 that there wind up being two instances of the devpts filesystem mounted on /dev/pts, the lower copy does not end up getting used. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-02 23:29:47 +08:00
out_put_fsi:
devpts_release(fsi);
devpts: clean up interface to pty drivers This gets rid of the horrible notion of having that struct inode *ptmx_inode be the linchpin of the interface between the pty code and devpts. By de-emphasizing the ptmx inode, a lot of things actually get cleaner, and we will have a much saner way forward. In particular, this will allow us to associate with any particular devpts instance at open-time, and not be artificially tied to one particular ptmx inode. The patch itself is actually fairly straightforward, and apart from some locking and return path cleanups it's pretty mechanical: - the interfaces that devpts exposes all take "struct pts_fs_info *" instead of "struct inode *ptmx_inode" now. NOTE! The "struct pts_fs_info" thing is a completely opaque structure as far as the pty driver is concerned: it's still declared entirely internally to devpts. So the pty code can't actually access it in any way, just pass it as a "cookie" to the devpts code. - the "look up the pts fs info" is now a single clear operation, that also does the reference count increment on the pts superblock. So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get ref" operation (devpts_get_ref(inode)), along with a "put ref" op (devpts_put_ref()). - the pty master "tty->driver_data" field now contains the pts_fs_info, not the ptmx inode. - because we don't care about the ptmx inode any more as some kind of base index, the ref counting can now drop the inode games - it just gets the ref on the superblock. - the pts_fs_info now has a back-pointer to the super_block. That's so that we can easily look up the information we actually need. Although quite often, the pts fs info was actually all we wanted, and not having to look it up based on some magical inode makes things more straightforward. In particular, now that "devpts_get_ref(inode)" operation should really be the *only* place we need to look up what devpts instance we're associated with, and we do it exactly once, at ptmx_open() time. The other side of this is that one ptmx node could now be associated with multiple different devpts instances - you could have a single /dev/ptmx node, and then have multiple mount namespaces with their own instances of devpts mounted on /dev/pts/. And that's all perfectly sane in a model where we just look up the pts instance at open time. This will eventually allow us to get rid of our odd single-vs-multiple pts instance model, but this patch in itself changes no semantics, only an internal binding model. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-17 06:16:07 +08:00
out_free_file:
tty_free_file(filp);
return retval;
}
static struct file_operations ptmx_fops __ro_after_init;
static void __init unix98_pty_init(void)
{
ptm_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV |
TTY_DRIVER_DEVPTS_MEM |
TTY_DRIVER_DYNAMIC_ALLOC);
if (IS_ERR(ptm_driver))
panic("Couldn't allocate Unix98 ptm driver");
pts_driver = tty_alloc_driver(NR_UNIX98_PTY_MAX,
TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW |
TTY_DRIVER_DYNAMIC_DEV |
TTY_DRIVER_DEVPTS_MEM |
TTY_DRIVER_DYNAMIC_ALLOC);
if (IS_ERR(pts_driver))
panic("Couldn't allocate Unix98 pts driver");
ptm_driver->driver_name = "pty_master";
ptm_driver->name = "ptm";
ptm_driver->major = UNIX98_PTY_MASTER_MAJOR;
ptm_driver->minor_start = 0;
ptm_driver->type = TTY_DRIVER_TYPE_PTY;
ptm_driver->subtype = PTY_TYPE_MASTER;
ptm_driver->init_termios = tty_std_termios;
ptm_driver->init_termios.c_iflag = 0;
ptm_driver->init_termios.c_oflag = 0;
ptm_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
ptm_driver->init_termios.c_lflag = 0;
ptm_driver->init_termios.c_ispeed = 38400;
ptm_driver->init_termios.c_ospeed = 38400;
ptm_driver->other = pts_driver;
tty_set_operations(ptm_driver, &ptm_unix98_ops);
pts_driver->driver_name = "pty_slave";
pts_driver->name = "pts";
pts_driver->major = UNIX98_PTY_SLAVE_MAJOR;
pts_driver->minor_start = 0;
pts_driver->type = TTY_DRIVER_TYPE_PTY;
pts_driver->subtype = PTY_TYPE_SLAVE;
pts_driver->init_termios = tty_std_termios;
pts_driver->init_termios.c_cflag = B38400 | CS8 | CREAD;
pts_driver->init_termios.c_ispeed = 38400;
pts_driver->init_termios.c_ospeed = 38400;
pts_driver->other = ptm_driver;
tty_set_operations(pts_driver, &pty_unix98_ops);
if (tty_register_driver(ptm_driver))
panic("Couldn't register Unix98 ptm driver");
if (tty_register_driver(pts_driver))
panic("Couldn't register Unix98 pts driver");
/* Now create the /dev/ptmx special device */
tty_default_fops(&ptmx_fops);
ptmx_fops.open = ptmx_open;
cdev_init(&ptmx_cdev, &ptmx_fops);
if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver");
device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
}
#else
static inline void unix98_pty_init(void) { }
#endif
static int __init pty_init(void)
{
legacy_pty_init();
unix98_pty_init();
return 0;
}
device_initcall(pty_init);