linux/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c

395 lines
9.3 KiB
C
Raw Normal View History

drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* Freescale DCU drm device driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/console.h>
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_cma_helper.h>
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_modeset_helper.h>
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
#include "fsl_dcu_drm_crtc.h"
#include "fsl_dcu_drm_drv.h"
#include "fsl_tcon.h"
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
static int legacyfb_depth = 24;
module_param(legacyfb_depth, int, 0444);
static bool fsl_dcu_drm_is_volatile_reg(struct device *dev, unsigned int reg)
{
if (reg == DCU_INT_STATUS || reg == DCU_UPDATE_MODE)
return true;
return false;
}
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
static const struct regmap_config fsl_dcu_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.volatile_reg = fsl_dcu_drm_is_volatile_reg,
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
};
static void fsl_dcu_irq_uninstall(struct drm_device *dev)
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
regmap_write(fsl_dev->regmap, DCU_INT_STATUS, ~0);
regmap_write(fsl_dev->regmap, DCU_INT_MASK, ~0);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
}
static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
int ret;
ret = fsl_dcu_drm_modeset_init(fsl_dev);
if (ret < 0) {
dev_err(dev->dev, "failed to initialize mode setting\n");
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return ret;
}
ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
if (ret < 0) {
dev_err(dev->dev, "failed to initialize vblank\n");
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
goto done;
}
ret = drm_irq_install(dev, fsl_dev->irq);
if (ret < 0) {
dev_err(dev->dev, "failed to install IRQ handler\n");
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
goto done;
}
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
if (legacyfb_depth != 16 && legacyfb_depth != 24 &&
legacyfb_depth != 32) {
dev_warn(dev->dev,
"Invalid legacyfb_depth. Defaulting to 24bpp\n");
legacyfb_depth = 24;
}
drm: Rely on mode_config data for fb_helper initialization Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-03 00:26:40 +08:00
fsl_dev->fbdev = drm_fbdev_cma_init(dev, legacyfb_depth, 1);
if (IS_ERR(fsl_dev->fbdev)) {
ret = PTR_ERR(fsl_dev->fbdev);
fsl_dev->fbdev = NULL;
goto done;
}
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return 0;
done:
drm_kms_helper_poll_fini(dev);
if (fsl_dev->fbdev)
drm_fbdev_cma_fini(fsl_dev->fbdev);
drm_mode_config_cleanup(dev);
drm_irq_uninstall(dev);
dev->dev_private = NULL;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return ret;
}
static void fsl_dcu_unload(struct drm_device *dev)
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
drm_atomic_helper_shutdown(dev);
drm_kms_helper_poll_fini(dev);
if (fsl_dev->fbdev)
drm_fbdev_cma_fini(fsl_dev->fbdev);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
drm_mode_config_cleanup(dev);
drm_irq_uninstall(dev);
dev->dev_private = NULL;
}
static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg)
{
struct drm_device *dev = arg;
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
unsigned int int_status;
int ret;
ret = regmap_read(fsl_dev->regmap, DCU_INT_STATUS, &int_status);
if (ret) {
dev_err(dev->dev, "read DCU_INT_STATUS failed\n");
return IRQ_NONE;
}
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
if (int_status & DCU_INT_STATUS_VBLANK)
drm_handle_vblank(dev, 0);
regmap_write(fsl_dev->regmap, DCU_INT_STATUS, int_status);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return IRQ_HANDLED;
}
static void fsl_dcu_drm_lastclose(struct drm_device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
drm_fbdev_cma_restore_mode(fsl_dev->fbdev);
}
DEFINE_DRM_GEM_CMA_FOPS(fsl_dcu_drm_fops);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
static struct drm_driver fsl_dcu_drm_driver = {
.driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET
| DRIVER_PRIME | DRIVER_ATOMIC,
.lastclose = fsl_dcu_drm_lastclose,
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
.load = fsl_dcu_load,
.unload = fsl_dcu_unload,
.irq_handler = fsl_dcu_drm_irq,
.irq_preinstall = fsl_dcu_irq_uninstall,
.irq_uninstall = fsl_dcu_irq_uninstall,
.gem_free_object_unlocked = drm_gem_cma_free_object,
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
.gem_vm_ops = &drm_gem_cma_vm_ops,
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_import = drm_gem_prime_import,
.gem_prime_export = drm_gem_prime_export,
.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
.gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
.gem_prime_vmap = drm_gem_cma_prime_vmap,
.gem_prime_vunmap = drm_gem_cma_prime_vunmap,
.gem_prime_mmap = drm_gem_cma_prime_mmap,
.dumb_create = drm_gem_cma_dumb_create,
.fops = &fsl_dcu_drm_fops,
.name = "fsl-dcu-drm",
.desc = "Freescale DCU DRM",
.date = "20160425",
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
.major = 1,
.minor = 1,
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
};
#ifdef CONFIG_PM_SLEEP
static int fsl_dcu_drm_pm_suspend(struct device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
int ret;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
if (!fsl_dev)
return 0;
disable_irq(fsl_dev->irq);
ret = drm_mode_config_helper_suspend(fsl_dev->drm);
if (ret) {
enable_irq(fsl_dev->irq);
return ret;
}
clk_disable_unprepare(fsl_dev->clk);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return 0;
}
static int fsl_dcu_drm_pm_resume(struct device *dev)
{
struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
int ret;
if (!fsl_dev)
return 0;
ret = clk_prepare_enable(fsl_dev->clk);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
return ret;
}
if (fsl_dev->tcon)
fsl_tcon_bypass_enable(fsl_dev->tcon);
fsl_dcu_drm_init_planes(fsl_dev->drm);
enable_irq(fsl_dev->irq);
drm_mode_config_helper_resume(fsl_dev->drm);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return 0;
}
#endif
static const struct dev_pm_ops fsl_dcu_drm_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(fsl_dcu_drm_pm_suspend, fsl_dcu_drm_pm_resume)
};
static const struct fsl_dcu_soc_data fsl_dcu_ls1021a_data = {
.name = "ls1021a",
.total_layer = 16,
.max_layer = 4,
.layer_regs = LS1021A_LAYER_REG_NUM,
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
};
static const struct fsl_dcu_soc_data fsl_dcu_vf610_data = {
.name = "vf610",
.total_layer = 64,
.max_layer = 6,
.layer_regs = VF610_LAYER_REG_NUM,
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
};
static const struct of_device_id fsl_dcu_of_match[] = {
{
.compatible = "fsl,ls1021a-dcu",
.data = &fsl_dcu_ls1021a_data,
}, {
.compatible = "fsl,vf610-dcu",
.data = &fsl_dcu_vf610_data,
}, {
},
};
MODULE_DEVICE_TABLE(of, fsl_dcu_of_match);
static int fsl_dcu_drm_probe(struct platform_device *pdev)
{
struct fsl_dcu_drm_device *fsl_dev;
struct drm_device *drm;
struct device *dev = &pdev->dev;
struct resource *res;
void __iomem *base;
struct drm_driver *driver = &fsl_dcu_drm_driver;
struct clk *pix_clk_in;
char pix_clk_name[32];
const char *pix_clk_in_name;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
const struct of_device_id *id;
int ret;
u8 div_ratio_shift = 0;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
fsl_dev = devm_kzalloc(dev, sizeof(*fsl_dev), GFP_KERNEL);
if (!fsl_dev)
return -ENOMEM;
id = of_match_node(fsl_dcu_of_match, pdev->dev.of_node);
if (!id)
return -ENODEV;
fsl_dev->soc = id->data;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base)) {
ret = PTR_ERR(base);
return ret;
}
fsl_dev->irq = platform_get_irq(pdev, 0);
if (fsl_dev->irq < 0) {
dev_err(dev, "failed to get irq\n");
return fsl_dev->irq;
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
}
fsl_dev->regmap = devm_regmap_init_mmio(dev, base,
&fsl_dcu_regmap_config);
if (IS_ERR(fsl_dev->regmap)) {
dev_err(dev, "regmap init failed\n");
return PTR_ERR(fsl_dev->regmap);
}
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
fsl_dev->clk = devm_clk_get(dev, "dcu");
if (IS_ERR(fsl_dev->clk)) {
dev_err(dev, "failed to get dcu clock\n");
return PTR_ERR(fsl_dev->clk);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
}
ret = clk_prepare_enable(fsl_dev->clk);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
if (ret < 0) {
dev_err(dev, "failed to enable dcu clk\n");
return ret;
}
pix_clk_in = devm_clk_get(dev, "pix");
if (IS_ERR(pix_clk_in)) {
/* legancy binding, use dcu clock as pixel clock input */
pix_clk_in = fsl_dev->clk;
}
if (of_property_read_bool(dev->of_node, "big-endian"))
div_ratio_shift = 24;
pix_clk_in_name = __clk_get_name(pix_clk_in);
snprintf(pix_clk_name, sizeof(pix_clk_name), "%s_pix", pix_clk_in_name);
fsl_dev->pix_clk = clk_register_divider(dev, pix_clk_name,
pix_clk_in_name, 0, base + DCU_DIV_RATIO,
div_ratio_shift, 8, CLK_DIVIDER_ROUND_CLOSEST, NULL);
if (IS_ERR(fsl_dev->pix_clk)) {
dev_err(dev, "failed to register pix clk\n");
ret = PTR_ERR(fsl_dev->pix_clk);
goto disable_clk;
}
fsl_dev->tcon = fsl_tcon_init(dev);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
drm = drm_dev_alloc(driver, dev);
if (IS_ERR(drm)) {
ret = PTR_ERR(drm);
goto unregister_pix_clk;
}
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
fsl_dev->dev = dev;
fsl_dev->drm = drm;
fsl_dev->np = dev->of_node;
drm->dev_private = fsl_dev;
dev_set_drvdata(dev, fsl_dev);
ret = drm_dev_register(drm, 0);
if (ret < 0)
goto unref;
return 0;
unref:
drm_dev_unref(drm);
unregister_pix_clk:
clk_unregister(fsl_dev->pix_clk);
disable_clk:
clk_disable_unprepare(fsl_dev->clk);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return ret;
}
static int fsl_dcu_drm_remove(struct platform_device *pdev)
{
struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
drm_dev_unregister(fsl_dev->drm);
drm_dev_unref(fsl_dev->drm);
clk_disable_unprepare(fsl_dev->clk);
clk_unregister(fsl_dev->pix_clk);
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 10:19:49 +08:00
return 0;
}
static struct platform_driver fsl_dcu_drm_platform_driver = {
.probe = fsl_dcu_drm_probe,
.remove = fsl_dcu_drm_remove,
.driver = {
.name = "fsl-dcu",
.pm = &fsl_dcu_drm_pm_ops,
.of_match_table = fsl_dcu_of_match,
},
};
module_platform_driver(fsl_dcu_drm_platform_driver);
MODULE_DESCRIPTION("Freescale DCU DRM Driver");
MODULE_LICENSE("GPL");