linux/block/blk-cgroup.c

1550 lines
39 KiB
C
Raw Normal View History

/*
* Common Block IO controller cgroup interface
*
* Based on ideas and code from CFQ, CFS and BFQ:
* Copyright (C) 2003 Jens Axboe <axboe@kernel.dk>
*
* Copyright (C) 2008 Fabio Checconi <fabio@gandalf.sssup.it>
* Paolo Valente <paolo.valente@unimore.it>
*
* Copyright (C) 2009 Vivek Goyal <vgoyal@redhat.com>
* Nauman Rafique <nauman@google.com>
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
*
* For policy-specific per-blkcg data:
* Copyright (C) 2015 Paolo Valente <paolo.valente@unimore.it>
* Arianna Avanzini <avanzini.arianna@gmail.com>
*/
#include <linux/ioprio.h>
#include <linux/kdev_t.h>
#include <linux/module.h>
#include <linux/sched/signal.h>
#include <linux/err.h>
#include <linux/blkdev.h>
writeback: make backing_dev_info host cgroup-specific bdi_writebacks For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:13:37 +08:00
#include <linux/backing-dev.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/genhd.h>
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
#include <linux/delay.h>
#include <linux/atomic.h>
#include <linux/ctype.h>
#include <linux/blk-cgroup.h>
#include "blk.h"
2010-04-09 14:31:19 +08:00
#define MAX_KEY_LEN 100
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
/*
* blkcg_pol_mutex protects blkcg_policy[] and policy [de]activation.
* blkcg_pol_register_mutex nests outside of it and synchronizes entire
* policy [un]register operations including cgroup file additions /
* removals. Putting cgroup file registration outside blkcg_pol_mutex
* allows grabbing it from cgroup callbacks.
*/
static DEFINE_MUTEX(blkcg_pol_register_mutex);
static DEFINE_MUTEX(blkcg_pol_mutex);
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
struct blkcg blkcg_root;
EXPORT_SYMBOL_GPL(blkcg_root);
struct cgroup_subsys_state * const blkcg_root_css = &blkcg_root.css;
static struct blkcg_policy *blkcg_policy[BLKCG_MAX_POLS];
static LIST_HEAD(all_blkcgs); /* protected by blkcg_pol_mutex */
static bool blkcg_policy_enabled(struct request_queue *q,
const struct blkcg_policy *pol)
{
return pol && test_bit(pol->plid, q->blkcg_pols);
}
/**
* blkg_free - free a blkg
* @blkg: blkg to free
*
* Free @blkg which may be partially allocated.
*/
static void blkg_free(struct blkcg_gq *blkg)
{
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
int i;
if (!blkg)
return;
for (i = 0; i < BLKCG_MAX_POLS; i++)
if (blkg->pd[i])
blkcg_policy[i]->pd_free_fn(blkg->pd[i]);
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
if (blkg->blkcg != &blkcg_root)
block: Avoid that blk_exit_rl() triggers a use-after-free Since the introduction of .init_rq_fn() and .exit_rq_fn() it is essential that the memory allocated for struct request_queue stays around until all blk_exit_rl() calls have finished. Hence make blk_init_rl() take a reference on struct request_queue. This patch fixes the following crash: general protection fault: 0000 [#2] SMP CPU: 3 PID: 28 Comm: ksoftirqd/3 Tainted: G D 4.12.0-rc2-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 task: ffff88013a108040 task.stack: ffffc9000071c000 RIP: 0010:free_request_size+0x1a/0x30 RSP: 0018:ffffc9000071fd38 EFLAGS: 00010202 RAX: 6b6b6b6b6b6b6b6b RBX: ffff880067362a88 RCX: 0000000000000003 RDX: ffff880067464178 RSI: ffff880067362a88 RDI: ffff880135ea4418 RBP: ffffc9000071fd40 R08: 0000000000000000 R09: 0000000100180009 R10: ffffc9000071fd38 R11: ffffffff81110800 R12: ffff88006752d3d8 R13: ffff88006752d3d8 R14: ffff88013a108040 R15: 000000000000000a FS: 0000000000000000(0000) GS:ffff88013fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa8ec1edb00 CR3: 0000000138ee8000 CR4: 00000000001406e0 Call Trace: mempool_destroy.part.10+0x21/0x40 mempool_destroy+0xe/0x10 blk_exit_rl+0x12/0x20 blkg_free+0x4d/0xa0 __blkg_release_rcu+0x59/0x170 rcu_process_callbacks+0x260/0x4e0 __do_softirq+0x116/0x250 smpboot_thread_fn+0x123/0x1e0 kthread+0x109/0x140 ret_from_fork+0x31/0x40 Fixes: commit e9c787e65c0c ("scsi: allocate scsi_cmnd structures as part of struct request") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Tejun Heo <tj@kernel.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-01 05:43:45 +08:00
blk_exit_rl(blkg->q, &blkg->rl);
blkg_rwstat_exit(&blkg->stat_ios);
blkg_rwstat_exit(&blkg->stat_bytes);
kfree(blkg);
}
/**
* blkg_alloc - allocate a blkg
* @blkcg: block cgroup the new blkg is associated with
* @q: request_queue the new blkg is associated with
* @gfp_mask: allocation mask to use
*
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
* Allocate a new blkg assocating @blkcg and @q.
*/
static struct blkcg_gq *blkg_alloc(struct blkcg *blkcg, struct request_queue *q,
gfp_t gfp_mask)
{
struct blkcg_gq *blkg;
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
int i;
/* alloc and init base part */
blkg = kzalloc_node(sizeof(*blkg), gfp_mask, q->node);
if (!blkg)
return NULL;
if (blkg_rwstat_init(&blkg->stat_bytes, gfp_mask) ||
blkg_rwstat_init(&blkg->stat_ios, gfp_mask))
goto err_free;
blkg->q = q;
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
INIT_LIST_HEAD(&blkg->q_node);
blkg->blkcg = blkcg;
blkcg: fix use-after-free in __blkg_release_rcu() by making blkcg_gq refcnt an atomic_t Hello, So, this patch should do. Joe, Vivek, can one of you guys please verify that the oops goes away with this patch? Jens, the original thread can be read at http://thread.gmane.org/gmane.linux.kernel/1720729 The fix converts blkg->refcnt from int to atomic_t. It does some overhead but it should be minute compared to everything else which is going on and the involved cacheline bouncing, so I think it's highly unlikely to cause any noticeable difference. Also, the refcnt in question should be converted to a perpcu_ref for blk-mq anyway, so the atomic_t is likely to go away pretty soon anyway. Thanks. ------- 8< ------- __blkg_release_rcu() may be invoked after the associated request_queue is released with a RCU grace period inbetween. As such, the function and callbacks invoked from it must not dereference the associated request_queue. This is clearly indicated in the comment above the function. Unfortunately, while trying to fix a different issue, 2a4fd070ee85 ("blkcg: move bulk of blkcg_gq release operations to the RCU callback") ignored this and added [un]locking of @blkg->q->queue_lock to __blkg_release_rcu(). This of course can cause oops as the request_queue may be long gone by the time this code gets executed. general protection fault: 0000 [#1] SMP CPU: 21 PID: 30 Comm: rcuos/21 Not tainted 3.15.0 #1 Hardware name: Stratus ftServer 6400/G7LAZ, BIOS BIOS Version 6.3:57 12/25/2013 task: ffff880854021de0 ti: ffff88085403c000 task.ti: ffff88085403c000 RIP: 0010:[<ffffffff8162e9e5>] [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60 RSP: 0018:ffff88085403fdf0 EFLAGS: 00010086 RAX: 0000000000020000 RBX: 0000000000000010 RCX: 0000000000000000 RDX: 000060ef80008248 RSI: 0000000000000286 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88085403fdf0 R08: 0000000000000286 R09: 0000000000009f39 R10: 0000000000020001 R11: 0000000000020001 R12: ffff88103c17a130 R13: ffff88103c17a080 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006e5ab8 CR3: 000000000193d000 CR4: 00000000000407e0 Stack: ffff88085403fe18 ffffffff812cbfc2 ffff88103c17a130 0000000000000000 ffff88103c17a130 ffff88085403fec0 ffffffff810d1d28 ffff880854021de0 ffff880854021de0 ffff88107fcaec58 ffff88085403fe80 ffff88107fcaec30 Call Trace: [<ffffffff812cbfc2>] __blkg_release_rcu+0x72/0x150 [<ffffffff810d1d28>] rcu_nocb_kthread+0x1e8/0x300 [<ffffffff81091d81>] kthread+0xe1/0x100 [<ffffffff8163813c>] ret_from_fork+0x7c/0xb0 Code: ff 47 04 48 8b 7d 08 be 00 02 00 00 e8 55 48 a4 ff 5d c3 0f 1f 00 66 66 66 66 90 55 48 89 e5 +fa 66 66 90 66 66 90 b8 00 00 02 00 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 75 02 5d c3 83 e2 fe 0f +b7 RIP [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60 RSP <ffff88085403fdf0> The request_queue locking was added because blkcg_gq->refcnt is an int protected with the queue lock and __blkg_release_rcu() needs to put the parent. Let's fix it by making blkcg_gq->refcnt an atomic_t and dropping queue locking in the function. Given the general heavy weight of the current request_queue and blkcg operations, this is unlikely to cause any noticeable overhead. Moreover, blkcg_gq->refcnt is likely to be converted to percpu_ref in the near future, so whatever (most likely negligible) overhead it may add is temporary. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/g/alpine.DEB.2.02.1406081816540.17948@jlaw-desktop.mno.stratus.com Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-20 05:42:57 +08:00
atomic_set(&blkg->refcnt, 1);
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 06:05:44 +08:00
/* root blkg uses @q->root_rl, init rl only for !root blkgs */
if (blkcg != &blkcg_root) {
if (blk_init_rl(&blkg->rl, q, gfp_mask))
goto err_free;
blkg->rl.blkg = blkg;
}
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
struct blkg_policy_data *pd;
if (!blkcg_policy_enabled(q, pol))
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
continue;
/* alloc per-policy data and attach it to blkg */
pd = pol->pd_alloc_fn(gfp_mask, q->node);
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 06:05:44 +08:00
if (!pd)
goto err_free;
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
blkg->pd[i] = pd;
pd->blkg = blkg;
pd->plid = i;
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
}
return blkg;
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 06:05:44 +08:00
err_free:
blkg_free(blkg);
return NULL;
}
struct blkcg_gq *blkg_lookup_slowpath(struct blkcg *blkcg,
struct request_queue *q, bool update_hint)
{
struct blkcg_gq *blkg;
/*
* Hint didn't match. Look up from the radix tree. Note that the
* hint can only be updated under queue_lock as otherwise @blkg
* could have already been removed from blkg_tree. The caller is
* responsible for grabbing queue_lock if @update_hint.
*/
blkg = radix_tree_lookup(&blkcg->blkg_tree, q->id);
if (blkg && blkg->q == q) {
if (update_hint) {
lockdep_assert_held(q->queue_lock);
rcu_assign_pointer(blkcg->blkg_hint, blkg);
}
return blkg;
}
return NULL;
}
blkcg: consolidate blkg creation in blkcg_bio_issue_check() blkg (blkcg_gq) currently is created by blkcg policies invoking blkg_lookup_create() which ends up repeating about the same code in different policies. Theoretically, this can avoid the overhead of looking and/or creating blkg's if blkcg is enabled but no policy is in use; however, the cost of blkg lookup / creation is very low especially if only the root blkcg is in use which is highly likely if no blkcg policy is in active use - it boils down to a single very predictable conditional and surrounding RCU protection. This patch consolidates blkg creation to a new function blkcg_bio_issue_check() which is called during bio issue from generic_make_request_checks(). blkcg_bio_issue_check() is now the only function which tries to create missing blkg's. The subsequent policy and request_list operations just perform blkg_lookup() and if missing falls back to the root. * blk_get_rl() no longer tries to create blkg. It uses blkg_lookup() instead of blkg_lookup_create(). * blk_throtl_bio() is now called from blkcg_bio_issue_check() with rcu read locked and blkg already looked up. Both throtl_lookup_tg() and throtl_lookup_create_tg() are dropped. * cfq is similarly updated. cfq_lookup_create_cfqg() is replaced with cfq_lookup_cfqg()which uses blkg_lookup(). This consolidates blkg handling and avoids unnecessary blkg creation retries under memory pressure. In addition, this provides a common bio entry point into blkcg where things like common accounting can be performed. v2: Build fixes for !CONFIG_CFQ_GROUP_IOSCHED and !CONFIG_BLK_DEV_THROTTLING. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:20 +08:00
EXPORT_SYMBOL_GPL(blkg_lookup_slowpath);
/*
* If @new_blkg is %NULL, this function tries to allocate a new one as
* necessary using %GFP_NOWAIT. @new_blkg is always consumed on return.
*/
static struct blkcg_gq *blkg_create(struct blkcg *blkcg,
struct request_queue *q,
struct blkcg_gq *new_blkg)
{
struct blkcg_gq *blkg;
struct bdi_writeback_congested *wb_congested;
int i, ret;
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:06 +08:00
WARN_ON_ONCE(!rcu_read_lock_held());
lockdep_assert_held(q->queue_lock);
/* blkg holds a reference to blkcg */
if (!css_tryget_online(&blkcg->css)) {
ret = -ENODEV;
goto err_free_blkg;
}
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:06 +08:00
wb_congested = wb_congested_get_create(q->backing_dev_info,
blkcg->css.id,
GFP_NOWAIT | __GFP_NOWARN);
if (!wb_congested) {
ret = -ENOMEM;
goto err_put_css;
}
/* allocate */
if (!new_blkg) {
new_blkg = blkg_alloc(blkcg, q, GFP_NOWAIT | __GFP_NOWARN);
if (unlikely(!new_blkg)) {
ret = -ENOMEM;
goto err_put_congested;
}
}
blkg = new_blkg;
blkg->wb_congested = wb_congested;
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:06 +08:00
/* link parent */
if (blkcg_parent(blkcg)) {
blkg->parent = __blkg_lookup(blkcg_parent(blkcg), q, false);
if (WARN_ON_ONCE(!blkg->parent)) {
ret = -ENODEV;
goto err_put_congested;
}
blkg_get(blkg->parent);
}
/* invoke per-policy init */
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
if (blkg->pd[i] && pol->pd_init_fn)
pol->pd_init_fn(blkg->pd[i]);
}
/* insert */
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:06 +08:00
spin_lock(&blkcg->lock);
ret = radix_tree_insert(&blkcg->blkg_tree, q->id, blkg);
if (likely(!ret)) {
hlist_add_head_rcu(&blkg->blkcg_node, &blkcg->blkg_list);
list_add(&blkg->q_node, &q->blkg_list);
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
if (blkg->pd[i] && pol->pd_online_fn)
pol->pd_online_fn(blkg->pd[i]);
}
}
blkg->online = true;
blkcg: factor out blkio_group creation Currently both blk-throttle and cfq-iosched implement their own blkio_group creation code in throtl_get_tg() and cfq_get_cfqg(). This patch factors out the common code into blkg_lookup_create(), which returns ERR_PTR value so that transitional failures due to queue bypass can be distinguished from other failures. * New plkio_policy_ops methods blkio_alloc_group_fn() and blkio_link_group_fn added. Both are transitional and will be removed once the blkg management code is fully moved into blk-cgroup.c. * blkio_alloc_group_fn() allocates policy-specific blkg which is usually a larger data structure with blkg as the first entry and intiailizes it. Note that initialization of blkg proper, including percpu stats, is responsibility of blk-cgroup proper. Note that default config (weight, bps...) initialization is done from this method; otherwise, we end up violating locking order between blkcg and q locks via blkcg_get_CONF() functions. * blkio_link_group_fn() is called under queue_lock and responsible for linking the blkg to the queue. blkcg side is handled by blk-cgroup proper. * The common blkg creation function is named blkg_lookup_create() and blkiocg_lookup_group() is renamed to blkg_lookup() for consistency. Also, throtl / cfq related functions are similarly [re]named for consistency. This simplifies blkcg policy implementations and enables further cleanup. -v2: Vivek noticed that blkg_lookup_create() incorrectly tested blk_queue_dead() instead of blk_queue_bypass() leading a user of the function ending up creating a new blkg on bypassing queue. This is a bug introduced while relocating bypass patches before this one. Fixed. -v3: ERR_PTR patch folded into this one. @for_root added to blkg_lookup_create() to allow creating root group on a bypassed queue during elevator switch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:06 +08:00
spin_unlock(&blkcg->lock);
if (!ret)
return blkg;
/* @blkg failed fully initialized, use the usual release path */
blkg_put(blkg);
return ERR_PTR(ret);
err_put_congested:
wb_congested_put(wb_congested);
err_put_css:
css_put(&blkcg->css);
err_free_blkg:
blkg_free(new_blkg);
return ERR_PTR(ret);
}
/**
* blkg_lookup_create - lookup blkg, try to create one if not there
* @blkcg: blkcg of interest
* @q: request_queue of interest
*
* Lookup blkg for the @blkcg - @q pair. If it doesn't exist, try to
* create one. blkg creation is performed recursively from blkcg_root such
* that all non-root blkg's have access to the parent blkg. This function
* should be called under RCU read lock and @q->queue_lock.
*
* Returns pointer to the looked up or created blkg on success, ERR_PTR()
* value on error. If @q is dead, returns ERR_PTR(-EINVAL). If @q is not
* dead and bypassing, returns ERR_PTR(-EBUSY).
*/
struct blkcg_gq *blkg_lookup_create(struct blkcg *blkcg,
struct request_queue *q)
{
struct blkcg_gq *blkg;
WARN_ON_ONCE(!rcu_read_lock_held());
lockdep_assert_held(q->queue_lock);
/*
* This could be the first entry point of blkcg implementation and
* we shouldn't allow anything to go through for a bypassing queue.
*/
if (unlikely(blk_queue_bypass(q)))
return ERR_PTR(blk_queue_dying(q) ? -ENODEV : -EBUSY);
blkg = __blkg_lookup(blkcg, q, true);
if (blkg)
return blkg;
/*
* Create blkgs walking down from blkcg_root to @blkcg, so that all
* non-root blkgs have access to their parents.
*/
while (true) {
struct blkcg *pos = blkcg;
struct blkcg *parent = blkcg_parent(blkcg);
while (parent && !__blkg_lookup(parent, q, false)) {
pos = parent;
parent = blkcg_parent(parent);
}
blkg = blkg_create(pos, q, NULL);
if (pos == blkcg || IS_ERR(blkg))
return blkg;
}
}
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
static void blkg_pd_offline(struct blkcg_gq *blkg)
{
int i;
lockdep_assert_held(blkg->q->queue_lock);
lockdep_assert_held(&blkg->blkcg->lock);
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
if (blkg->pd[i] && !blkg->pd[i]->offline &&
pol->pd_offline_fn) {
pol->pd_offline_fn(blkg->pd[i]);
blkg->pd[i]->offline = true;
}
}
}
static void blkg_destroy(struct blkcg_gq *blkg)
{
struct blkcg *blkcg = blkg->blkcg;
struct blkcg_gq *parent = blkg->parent;
lockdep_assert_held(blkg->q->queue_lock);
lockdep_assert_held(&blkcg->lock);
/* Something wrong if we are trying to remove same group twice */
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
WARN_ON_ONCE(list_empty(&blkg->q_node));
WARN_ON_ONCE(hlist_unhashed(&blkg->blkcg_node));
if (parent) {
blkg_rwstat_add_aux(&parent->stat_bytes, &blkg->stat_bytes);
blkg_rwstat_add_aux(&parent->stat_ios, &blkg->stat_ios);
}
blkg->online = false;
radix_tree_delete(&blkcg->blkg_tree, blkg->q->id);
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
list_del_init(&blkg->q_node);
hlist_del_init_rcu(&blkg->blkcg_node);
/*
* Both setting lookup hint to and clearing it from @blkg are done
* under queue_lock. If it's not pointing to @blkg now, it never
* will. Hint assignment itself can race safely.
*/
if (rcu_access_pointer(blkcg->blkg_hint) == blkg)
rcu_assign_pointer(blkcg->blkg_hint, NULL);
/*
* Put the reference taken at the time of creation so that when all
* queues are gone, group can be destroyed.
*/
blkg_put(blkg);
}
/**
* blkg_destroy_all - destroy all blkgs associated with a request_queue
* @q: request_queue of interest
*
* Destroy all blkgs associated with @q.
*/
static void blkg_destroy_all(struct request_queue *q)
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
{
struct blkcg_gq *blkg, *n;
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
lockdep_assert_held(q->queue_lock);
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
list_for_each_entry_safe(blkg, n, &q->blkg_list, q_node) {
struct blkcg *blkcg = blkg->blkcg;
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
spin_lock(&blkcg->lock);
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
blkg_pd_offline(blkg);
blkg_destroy(blkg);
spin_unlock(&blkcg->lock);
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
}
block: blkg_destroy_all() should clear q->root_blkg and ->root_rl.blkg While making the root blkg unconditional, ec13b1d6f0a0 ("blkcg: always create the blkcg_gq for the root blkcg") removed the part which clears q->root_blkg and ->root_rl.blkg during q exit. This leaves the two pointers dangling after blkg_destroy_all(). blk-throttle exit path performs blkg traversals and dereferences ->root_blkg and can lead to the following oops. BUG: unable to handle kernel NULL pointer dereference at 0000000000000558 IP: [<ffffffff81389746>] __blkg_lookup+0x26/0x70 ... task: ffff88001b4e2580 ti: ffff88001ac0c000 task.ti: ffff88001ac0c000 RIP: 0010:[<ffffffff81389746>] [<ffffffff81389746>] __blkg_lookup+0x26/0x70 ... Call Trace: [<ffffffff8138d14a>] blk_throtl_drain+0x5a/0x110 [<ffffffff8138a108>] blkcg_drain_queue+0x18/0x20 [<ffffffff81369a70>] __blk_drain_queue+0xc0/0x170 [<ffffffff8136a101>] blk_queue_bypass_start+0x61/0x80 [<ffffffff81388c59>] blkcg_deactivate_policy+0x39/0x100 [<ffffffff8138d328>] blk_throtl_exit+0x38/0x50 [<ffffffff8138a14e>] blkcg_exit_queue+0x3e/0x50 [<ffffffff8137016e>] blk_release_queue+0x1e/0xc0 ... While the bug is a straigh-forward use-after-free bug, it is tricky to reproduce because blkg release is RCU protected and the rest of exit path usually finishes before RCU grace period. This patch fixes the bug by updating blkg_destro_all() to clear q->root_blkg and ->root_rl.blkg. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "Richard W.M. Jones" <rjones@redhat.com> Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Link: http://lkml.kernel.org/g/CA+5PVA5rzQ0s4723n5rHBcxQa9t0cW8BPPBekr_9aMRoWt2aYg@mail.gmail.com Fixes: ec13b1d6f0a0 ("blkcg: always create the blkcg_gq for the root blkcg") Cc: stable@vger.kernel.org # v4.2+ Tested-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-09-06 03:47:36 +08:00
q->root_blkg = NULL;
q->root_rl.blkg = NULL;
blkcg: shoot down blkio_groups on elevator switch Elevator switch may involve changes to blkcg policies. Implement shoot down of blkio_groups. Combined with the previous bypass updates, the end goal is updating blkcg core such that it can ensure that blkcg's being affected become quiescent and don't have any per-blkg data hanging around before commencing any policy updates. Until queues are made aware of the policies that applies to them, as an interim step, all per-policy blkg data will be shot down. * blk-throtl doesn't need this change as it can't be disabled for a live queue; however, update it anyway as the scheduled blkg unification requires this behavior change. This means that blk-throtl configuration will be unnecessarily lost over elevator switch. This oddity will be removed after blkcg learns to associate individual policies with request_queues. * blk-throtl dosen't shoot down root_tg. This is to ease transition. Unified blkg will always have persistent root group and not shooting down root_tg for now eases transition to that point by avoiding having to update td->root_tg and is safe as blk-throtl can never be disabled -v2: Vivek pointed out that group list is not guaranteed to be empty on return from clear function if it raced cgroup removal and lost. Fix it by waiting a bit and retrying. This kludge will soon be removed once locking is updated such that blkg is never in limbo state between blkcg and request_queue locks. blk-throtl no longer shoots down root_tg to avoid breaking td->root_tg. Also, Nest queue_lock inside blkio_list_lock not the other way around to avoid introduce possible deadlock via blkcg lock. -v3: blkcg_clear_queue() repositioned and renamed to blkg_destroy_all() to increase consistency with later changes. cfq_clear_queue() updated to check q->elevator before dereferencing it to avoid NULL dereference on not fully initialized queues (used by later change). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:00 +08:00
}
/*
* A group is RCU protected, but having an rcu lock does not mean that one
* can access all the fields of blkg and assume these are valid. For
* example, don't try to follow throtl_data and request queue links.
*
* Having a reference to blkg under an rcu allows accesses to only values
* local to groups like group stats and group rate limits.
*/
void __blkg_release_rcu(struct rcu_head *rcu_head)
{
struct blkcg_gq *blkg = container_of(rcu_head, struct blkcg_gq, rcu_head);
/* release the blkcg and parent blkg refs this blkg has been holding */
css_put(&blkg->blkcg->css);
blkcg: fix use-after-free in __blkg_release_rcu() by making blkcg_gq refcnt an atomic_t Hello, So, this patch should do. Joe, Vivek, can one of you guys please verify that the oops goes away with this patch? Jens, the original thread can be read at http://thread.gmane.org/gmane.linux.kernel/1720729 The fix converts blkg->refcnt from int to atomic_t. It does some overhead but it should be minute compared to everything else which is going on and the involved cacheline bouncing, so I think it's highly unlikely to cause any noticeable difference. Also, the refcnt in question should be converted to a perpcu_ref for blk-mq anyway, so the atomic_t is likely to go away pretty soon anyway. Thanks. ------- 8< ------- __blkg_release_rcu() may be invoked after the associated request_queue is released with a RCU grace period inbetween. As such, the function and callbacks invoked from it must not dereference the associated request_queue. This is clearly indicated in the comment above the function. Unfortunately, while trying to fix a different issue, 2a4fd070ee85 ("blkcg: move bulk of blkcg_gq release operations to the RCU callback") ignored this and added [un]locking of @blkg->q->queue_lock to __blkg_release_rcu(). This of course can cause oops as the request_queue may be long gone by the time this code gets executed. general protection fault: 0000 [#1] SMP CPU: 21 PID: 30 Comm: rcuos/21 Not tainted 3.15.0 #1 Hardware name: Stratus ftServer 6400/G7LAZ, BIOS BIOS Version 6.3:57 12/25/2013 task: ffff880854021de0 ti: ffff88085403c000 task.ti: ffff88085403c000 RIP: 0010:[<ffffffff8162e9e5>] [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60 RSP: 0018:ffff88085403fdf0 EFLAGS: 00010086 RAX: 0000000000020000 RBX: 0000000000000010 RCX: 0000000000000000 RDX: 000060ef80008248 RSI: 0000000000000286 RDI: 6b6b6b6b6b6b6b6b RBP: ffff88085403fdf0 R08: 0000000000000286 R09: 0000000000009f39 R10: 0000000000020001 R11: 0000000000020001 R12: ffff88103c17a130 R13: ffff88103c17a080 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fca0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000006e5ab8 CR3: 000000000193d000 CR4: 00000000000407e0 Stack: ffff88085403fe18 ffffffff812cbfc2 ffff88103c17a130 0000000000000000 ffff88103c17a130 ffff88085403fec0 ffffffff810d1d28 ffff880854021de0 ffff880854021de0 ffff88107fcaec58 ffff88085403fe80 ffff88107fcaec30 Call Trace: [<ffffffff812cbfc2>] __blkg_release_rcu+0x72/0x150 [<ffffffff810d1d28>] rcu_nocb_kthread+0x1e8/0x300 [<ffffffff81091d81>] kthread+0xe1/0x100 [<ffffffff8163813c>] ret_from_fork+0x7c/0xb0 Code: ff 47 04 48 8b 7d 08 be 00 02 00 00 e8 55 48 a4 ff 5d c3 0f 1f 00 66 66 66 66 90 55 48 89 e5 +fa 66 66 90 66 66 90 b8 00 00 02 00 <f0> 0f c1 07 89 c2 c1 ea 10 66 39 c2 75 02 5d c3 83 e2 fe 0f +b7 RIP [<ffffffff8162e9e5>] _raw_spin_lock_irq+0x15/0x60 RSP <ffff88085403fdf0> The request_queue locking was added because blkcg_gq->refcnt is an int protected with the queue lock and __blkg_release_rcu() needs to put the parent. Let's fix it by making blkcg_gq->refcnt an atomic_t and dropping queue locking in the function. Given the general heavy weight of the current request_queue and blkcg operations, this is unlikely to cause any noticeable overhead. Moreover, blkcg_gq->refcnt is likely to be converted to percpu_ref in the near future, so whatever (most likely negligible) overhead it may add is temporary. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Link: http://lkml.kernel.org/g/alpine.DEB.2.02.1406081816540.17948@jlaw-desktop.mno.stratus.com Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-06-20 05:42:57 +08:00
if (blkg->parent)
blkg_put(blkg->parent);
wb_congested_put(blkg->wb_congested);
blkg_free(blkg);
}
EXPORT_SYMBOL_GPL(__blkg_release_rcu);
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 06:05:44 +08:00
/*
* The next function used by blk_queue_for_each_rl(). It's a bit tricky
* because the root blkg uses @q->root_rl instead of its own rl.
*/
struct request_list *__blk_queue_next_rl(struct request_list *rl,
struct request_queue *q)
{
struct list_head *ent;
struct blkcg_gq *blkg;
/*
* Determine the current blkg list_head. The first entry is
* root_rl which is off @q->blkg_list and mapped to the head.
*/
if (rl == &q->root_rl) {
ent = &q->blkg_list;
/* There are no more block groups, hence no request lists */
if (list_empty(ent))
return NULL;
blkcg: implement per-blkg request allocation Currently, request_queue has one request_list to allocate requests from regardless of blkcg of the IO being issued. When the unified request pool is used up, cfq proportional IO limits become meaningless - whoever grabs the next request being freed wins the race regardless of the configured weights. This can be easily demonstrated by creating a blkio cgroup w/ very low weight, put a program which can issue a lot of random direct IOs there and running a sequential IO from a different cgroup. As soon as the request pool is used up, the sequential IO bandwidth crashes. This patch implements per-blkg request_list. Each blkg has its own request_list and any IO allocates its request from the matching blkg making blkcgs completely isolated in terms of request allocation. * Root blkcg uses the request_list embedded in each request_queue, which was renamed to @q->root_rl from @q->rq. While making blkcg rl handling a bit harier, this enables avoiding most overhead for root blkcg. * Queue fullness is properly per request_list but bdi isn't blkcg aware yet, so congestion state currently just follows the root blkcg. As writeback isn't aware of blkcg yet, this works okay for async congestion but readahead may get the wrong signals. It's better than blkcg completely collapsing with shared request_list but needs to be improved with future changes. * After this change, each block cgroup gets a full request pool making resource consumption of each cgroup higher. This makes allowing non-root users to create cgroups less desirable; however, note that allowing non-root users to directly manage cgroups is already severely broken regardless of this patch - each block cgroup consumes kernel memory and skews IO weight (IO weights are not hierarchical). v2: queue-sysfs.txt updated and patch description udpated as suggested by Vivek. v3: blk_get_rl() wasn't checking error return from blkg_lookup_create() and may cause oops on lookup failure. Fix it by falling back to root_rl on blkg lookup failures. This problem was spotted by Rakesh Iyer <rni@google.com>. v4: Updated to accomodate 458f27a982 "block: Avoid missed wakeup in request waitqueue". blk_drain_queue() now wakes up waiters on all blkg->rl on the target queue. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-06-27 06:05:44 +08:00
} else {
blkg = container_of(rl, struct blkcg_gq, rl);
ent = &blkg->q_node;
}
/* walk to the next list_head, skip root blkcg */
ent = ent->next;
if (ent == &q->root_blkg->q_node)
ent = ent->next;
if (ent == &q->blkg_list)
return NULL;
blkg = container_of(ent, struct blkcg_gq, q_node);
return &blkg->rl;
}
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:24 +08:00
static int blkcg_reset_stats(struct cgroup_subsys_state *css,
struct cftype *cftype, u64 val)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in file methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup. Please see the previous commit which converts the subsystem methods for rationale. This patch converts all cftype file operations to take @css instead of @cgroup. cftypes for the cgroup core files don't have their subsytem pointer set. These will automatically use the dummy_css added by the previous patch and can be converted the same way. Most subsystem conversions are straight forwards but there are some interesting ones. * freezer: update_if_frozen() is also converted to take @css instead of @cgroup for consistency. This will make the code look simpler too once iterators are converted to use css. * memory/vmpressure: mem_cgroup_from_css() needs to be exported to vmpressure while mem_cgroup_from_cont() can be made static. Updated accordingly. * cpu: cgroup_tg() doesn't have any user left. Removed. * cpuacct: cgroup_ca() doesn't have any user left. Removed. * hugetlb: hugetlb_cgroup_form_cgroup() doesn't have any user left. Removed. * net_cls: cgrp_cls_state() doesn't have any user left. Removed. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:24 +08:00
struct blkcg *blkcg = css_to_blkcg(css);
struct blkcg_gq *blkg;
int i;
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_lock(&blkcg_pol_mutex);
spin_lock_irq(&blkcg->lock);
/*
* Note that stat reset is racy - it doesn't synchronize against
* stat updates. This is a debug feature which shouldn't exist
* anyway. If you get hit by a race, retry.
*/
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:06:00 +08:00
hlist_for_each_entry(blkg, &blkcg->blkg_list, blkcg_node) {
blkg_rwstat_reset(&blkg->stat_bytes);
blkg_rwstat_reset(&blkg->stat_ios);
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
if (blkg->pd[i] && pol->pd_reset_stats_fn)
pol->pd_reset_stats_fn(blkg->pd[i]);
}
}
spin_unlock_irq(&blkcg->lock);
mutex_unlock(&blkcg_pol_mutex);
return 0;
}
const char *blkg_dev_name(struct blkcg_gq *blkg)
{
/* some drivers (floppy) instantiate a queue w/o disk registered */
if (blkg->q->backing_dev_info->dev)
return dev_name(blkg->q->backing_dev_info->dev);
return NULL;
}
EXPORT_SYMBOL_GPL(blkg_dev_name);
/**
* blkcg_print_blkgs - helper for printing per-blkg data
* @sf: seq_file to print to
* @blkcg: blkcg of interest
* @prfill: fill function to print out a blkg
* @pol: policy in question
* @data: data to be passed to @prfill
* @show_total: to print out sum of prfill return values or not
*
* This function invokes @prfill on each blkg of @blkcg if pd for the
* policy specified by @pol exists. @prfill is invoked with @sf, the
* policy data and @data and the matching queue lock held. If @show_total
* is %true, the sum of the return values from @prfill is printed with
* "Total" label at the end.
*
* This is to be used to construct print functions for
* cftype->read_seq_string method.
*/
void blkcg_print_blkgs(struct seq_file *sf, struct blkcg *blkcg,
u64 (*prfill)(struct seq_file *,
struct blkg_policy_data *, int),
const struct blkcg_policy *pol, int data,
bool show_total)
{
struct blkcg_gq *blkg;
u64 total = 0;
rcu_read_lock();
Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-block Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ...
2013-03-01 04:52:24 +08:00
hlist_for_each_entry_rcu(blkg, &blkcg->blkg_list, blkcg_node) {
spin_lock_irq(blkg->q->queue_lock);
if (blkcg_policy_enabled(blkg->q, pol))
total += prfill(sf, blkg->pd[pol->plid], data);
spin_unlock_irq(blkg->q->queue_lock);
}
rcu_read_unlock();
if (show_total)
seq_printf(sf, "Total %llu\n", (unsigned long long)total);
}
EXPORT_SYMBOL_GPL(blkcg_print_blkgs);
/**
* __blkg_prfill_u64 - prfill helper for a single u64 value
* @sf: seq_file to print to
* @pd: policy private data of interest
* @v: value to print
*
* Print @v to @sf for the device assocaited with @pd.
*/
u64 __blkg_prfill_u64(struct seq_file *sf, struct blkg_policy_data *pd, u64 v)
{
const char *dname = blkg_dev_name(pd->blkg);
if (!dname)
return 0;
seq_printf(sf, "%s %llu\n", dname, (unsigned long long)v);
return v;
}
EXPORT_SYMBOL_GPL(__blkg_prfill_u64);
/**
* __blkg_prfill_rwstat - prfill helper for a blkg_rwstat
* @sf: seq_file to print to
* @pd: policy private data of interest
* @rwstat: rwstat to print
*
* Print @rwstat to @sf for the device assocaited with @pd.
*/
u64 __blkg_prfill_rwstat(struct seq_file *sf, struct blkg_policy_data *pd,
const struct blkg_rwstat *rwstat)
{
static const char *rwstr[] = {
[BLKG_RWSTAT_READ] = "Read",
[BLKG_RWSTAT_WRITE] = "Write",
[BLKG_RWSTAT_SYNC] = "Sync",
[BLKG_RWSTAT_ASYNC] = "Async",
};
const char *dname = blkg_dev_name(pd->blkg);
u64 v;
int i;
if (!dname)
return 0;
for (i = 0; i < BLKG_RWSTAT_NR; i++)
seq_printf(sf, "%s %s %llu\n", dname, rwstr[i],
(unsigned long long)atomic64_read(&rwstat->aux_cnt[i]));
v = atomic64_read(&rwstat->aux_cnt[BLKG_RWSTAT_READ]) +
atomic64_read(&rwstat->aux_cnt[BLKG_RWSTAT_WRITE]);
seq_printf(sf, "%s Total %llu\n", dname, (unsigned long long)v);
return v;
}
EXPORT_SYMBOL_GPL(__blkg_prfill_rwstat);
/**
* blkg_prfill_stat - prfill callback for blkg_stat
* @sf: seq_file to print to
* @pd: policy private data of interest
* @off: offset to the blkg_stat in @pd
*
* prfill callback for printing a blkg_stat.
*/
u64 blkg_prfill_stat(struct seq_file *sf, struct blkg_policy_data *pd, int off)
{
return __blkg_prfill_u64(sf, pd, blkg_stat_read((void *)pd + off));
}
EXPORT_SYMBOL_GPL(blkg_prfill_stat);
/**
* blkg_prfill_rwstat - prfill callback for blkg_rwstat
* @sf: seq_file to print to
* @pd: policy private data of interest
* @off: offset to the blkg_rwstat in @pd
*
* prfill callback for printing a blkg_rwstat.
*/
u64 blkg_prfill_rwstat(struct seq_file *sf, struct blkg_policy_data *pd,
int off)
{
struct blkg_rwstat rwstat = blkg_rwstat_read((void *)pd + off);
return __blkg_prfill_rwstat(sf, pd, &rwstat);
}
EXPORT_SYMBOL_GPL(blkg_prfill_rwstat);
static u64 blkg_prfill_rwstat_field(struct seq_file *sf,
struct blkg_policy_data *pd, int off)
{
struct blkg_rwstat rwstat = blkg_rwstat_read((void *)pd->blkg + off);
return __blkg_prfill_rwstat(sf, pd, &rwstat);
}
/**
* blkg_print_stat_bytes - seq_show callback for blkg->stat_bytes
* @sf: seq_file to print to
* @v: unused
*
* To be used as cftype->seq_show to print blkg->stat_bytes.
* cftype->private must be set to the blkcg_policy.
*/
int blkg_print_stat_bytes(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
blkg_prfill_rwstat_field, (void *)seq_cft(sf)->private,
offsetof(struct blkcg_gq, stat_bytes), true);
return 0;
}
EXPORT_SYMBOL_GPL(blkg_print_stat_bytes);
/**
* blkg_print_stat_bytes - seq_show callback for blkg->stat_ios
* @sf: seq_file to print to
* @v: unused
*
* To be used as cftype->seq_show to print blkg->stat_ios. cftype->private
* must be set to the blkcg_policy.
*/
int blkg_print_stat_ios(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
blkg_prfill_rwstat_field, (void *)seq_cft(sf)->private,
offsetof(struct blkcg_gq, stat_ios), true);
return 0;
}
EXPORT_SYMBOL_GPL(blkg_print_stat_ios);
static u64 blkg_prfill_rwstat_field_recursive(struct seq_file *sf,
struct blkg_policy_data *pd,
int off)
{
struct blkg_rwstat rwstat = blkg_rwstat_recursive_sum(pd->blkg,
NULL, off);
return __blkg_prfill_rwstat(sf, pd, &rwstat);
}
/**
* blkg_print_stat_bytes_recursive - recursive version of blkg_print_stat_bytes
* @sf: seq_file to print to
* @v: unused
*/
int blkg_print_stat_bytes_recursive(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
blkg_prfill_rwstat_field_recursive,
(void *)seq_cft(sf)->private,
offsetof(struct blkcg_gq, stat_bytes), true);
return 0;
}
EXPORT_SYMBOL_GPL(blkg_print_stat_bytes_recursive);
/**
* blkg_print_stat_ios_recursive - recursive version of blkg_print_stat_ios
* @sf: seq_file to print to
* @v: unused
*/
int blkg_print_stat_ios_recursive(struct seq_file *sf, void *v)
{
blkcg_print_blkgs(sf, css_to_blkcg(seq_css(sf)),
blkg_prfill_rwstat_field_recursive,
(void *)seq_cft(sf)->private,
offsetof(struct blkcg_gq, stat_ios), true);
return 0;
}
EXPORT_SYMBOL_GPL(blkg_print_stat_ios_recursive);
/**
* blkg_stat_recursive_sum - collect hierarchical blkg_stat
* @blkg: blkg of interest
* @pol: blkcg_policy which contains the blkg_stat
* @off: offset to the blkg_stat in blkg_policy_data or @blkg
*
* Collect the blkg_stat specified by @blkg, @pol and @off and all its
* online descendants and their aux counts. The caller must be holding the
* queue lock for online tests.
*
* If @pol is NULL, blkg_stat is at @off bytes into @blkg; otherwise, it is
* at @off bytes into @blkg's blkg_policy_data of the policy.
*/
u64 blkg_stat_recursive_sum(struct blkcg_gq *blkg,
struct blkcg_policy *pol, int off)
{
struct blkcg_gq *pos_blkg;
2013-08-09 08:11:25 +08:00
struct cgroup_subsys_state *pos_css;
cgroup: make css_for_each_descendant() and friends include the origin css in the iteration Previously, all css descendant iterators didn't include the origin (root of subtree) css in the iteration. The reasons were maintaining consistency with css_for_each_child() and that at the time of introduction more use cases needed skipping the origin anyway; however, given that css_is_descendant() considers self to be a descendant, omitting the origin css has become more confusing and looking at the accumulated use cases rather clearly indicates that including origin would result in simpler code overall. While this is a change which can easily lead to subtle bugs, cgroup API including the iterators has recently gone through major restructuring and no out-of-tree changes will be applicable without adjustments making this a relatively acceptable opportunity for this type of change. The conversions are mostly straight-forward. If the iteration block had explicit origin handling before or after, it's moved inside the iteration. If not, if (pos == origin) continue; is added. Some conversions add extra reference get/put around origin handling by consolidating origin handling and the rest. While the extra ref operations aren't strictly necessary, this shouldn't cause any noticeable difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com>
2013-08-09 08:11:27 +08:00
u64 sum = 0;
lockdep_assert_held(blkg->q->queue_lock);
rcu_read_lock();
blkg_for_each_descendant_pre(pos_blkg, pos_css, blkg) {
struct blkg_stat *stat;
if (!pos_blkg->online)
continue;
if (pol)
stat = (void *)blkg_to_pd(pos_blkg, pol) + off;
else
stat = (void *)blkg + off;
sum += blkg_stat_read(stat) + atomic64_read(&stat->aux_cnt);
}
rcu_read_unlock();
return sum;
}
EXPORT_SYMBOL_GPL(blkg_stat_recursive_sum);
/**
* blkg_rwstat_recursive_sum - collect hierarchical blkg_rwstat
* @blkg: blkg of interest
* @pol: blkcg_policy which contains the blkg_rwstat
* @off: offset to the blkg_rwstat in blkg_policy_data or @blkg
*
* Collect the blkg_rwstat specified by @blkg, @pol and @off and all its
* online descendants and their aux counts. The caller must be holding the
* queue lock for online tests.
*
* If @pol is NULL, blkg_rwstat is at @off bytes into @blkg; otherwise, it
* is at @off bytes into @blkg's blkg_policy_data of the policy.
*/
struct blkg_rwstat blkg_rwstat_recursive_sum(struct blkcg_gq *blkg,
struct blkcg_policy *pol, int off)
{
struct blkcg_gq *pos_blkg;
2013-08-09 08:11:25 +08:00
struct cgroup_subsys_state *pos_css;
cgroup: make css_for_each_descendant() and friends include the origin css in the iteration Previously, all css descendant iterators didn't include the origin (root of subtree) css in the iteration. The reasons were maintaining consistency with css_for_each_child() and that at the time of introduction more use cases needed skipping the origin anyway; however, given that css_is_descendant() considers self to be a descendant, omitting the origin css has become more confusing and looking at the accumulated use cases rather clearly indicates that including origin would result in simpler code overall. While this is a change which can easily lead to subtle bugs, cgroup API including the iterators has recently gone through major restructuring and no out-of-tree changes will be applicable without adjustments making this a relatively acceptable opportunity for this type of change. The conversions are mostly straight-forward. If the iteration block had explicit origin handling before or after, it's moved inside the iteration. If not, if (pos == origin) continue; is added. Some conversions add extra reference get/put around origin handling by consolidating origin handling and the rest. While the extra ref operations aren't strictly necessary, this shouldn't cause any noticeable difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com>
2013-08-09 08:11:27 +08:00
struct blkg_rwstat sum = { };
int i;
lockdep_assert_held(blkg->q->queue_lock);
rcu_read_lock();
blkg_for_each_descendant_pre(pos_blkg, pos_css, blkg) {
struct blkg_rwstat *rwstat;
if (!pos_blkg->online)
continue;
if (pol)
rwstat = (void *)blkg_to_pd(pos_blkg, pol) + off;
else
rwstat = (void *)pos_blkg + off;
for (i = 0; i < BLKG_RWSTAT_NR; i++)
atomic64_add(atomic64_read(&rwstat->aux_cnt[i]) +
percpu_counter_sum_positive(&rwstat->cpu_cnt[i]),
&sum.aux_cnt[i]);
}
rcu_read_unlock();
return sum;
}
EXPORT_SYMBOL_GPL(blkg_rwstat_recursive_sum);
/* Performs queue bypass and policy enabled checks then looks up blkg. */
static struct blkcg_gq *blkg_lookup_check(struct blkcg *blkcg,
const struct blkcg_policy *pol,
struct request_queue *q)
{
WARN_ON_ONCE(!rcu_read_lock_held());
lockdep_assert_held(q->queue_lock);
if (!blkcg_policy_enabled(q, pol))
return ERR_PTR(-EOPNOTSUPP);
/*
* This could be the first entry point of blkcg implementation and
* we shouldn't allow anything to go through for a bypassing queue.
*/
if (unlikely(blk_queue_bypass(q)))
return ERR_PTR(blk_queue_dying(q) ? -ENODEV : -EBUSY);
return __blkg_lookup(blkcg, q, true /* update_hint */);
}
/**
* blkg_conf_prep - parse and prepare for per-blkg config update
* @blkcg: target block cgroup
* @pol: target policy
* @input: input string
* @ctx: blkg_conf_ctx to be filled
*
* Parse per-blkg config update from @input and initialize @ctx with the
* result. @ctx->blkg points to the blkg to be updated and @ctx->body the
* part of @input following MAJ:MIN. This function returns with RCU read
* lock and queue lock held and must be paired with blkg_conf_finish().
*/
int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
char *input, struct blkg_conf_ctx *ctx)
__acquires(rcu) __acquires(disk->queue->queue_lock)
{
struct gendisk *disk;
struct request_queue *q;
struct blkcg_gq *blkg;
unsigned int major, minor;
int key_len, part, ret;
char *body;
if (sscanf(input, "%u:%u%n", &major, &minor, &key_len) != 2)
return -EINVAL;
body = input + key_len;
if (!isspace(*body))
return -EINVAL;
body = skip_spaces(body);
disk = get_gendisk(MKDEV(major, minor), &part);
if (!disk)
return -ENODEV;
if (part) {
ret = -ENODEV;
goto fail;
}
blkcg: don't allow or retain configuration of missing devices blkcg is very peculiar in that it allows setting and remembering configurations for non-existent devices by maintaining separate data structures for configuration. This behavior is completely out of the usual norms and outright confusing; furthermore, it uses dev_t number to match the configuration to devices, which is unpredictable to begin with and becomes completely unuseable if EXT_DEVT is fully used. It is wholely unnecessary - we already have fully functional userland mechanism to program devices being hotplugged which has full access to device identification, connection topology and filesystem information. Add a new struct blkio_group_conf which contains all blkcg configurations to blkio_group and let blkio_group, which can be created iff the associated device exists and is removed when the associated device goes away, carry all configurations. Note that, after this patch, all newly created blkg's will always have the default configuration (unlimited for throttling and blkcg's weight for propio). This patch makes blkio_policy_node meaningless but doesn't remove it. The next patch will. -v2: Updated to retry after short sleep if blkg lookup/creation failed due to the queue being temporarily bypassed as indicated by -EBUSY return. Pointed out by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:07 +08:00
q = disk->queue;
rcu_read_lock();
spin_lock_irq(q->queue_lock);
blkcg: don't allow or retain configuration of missing devices blkcg is very peculiar in that it allows setting and remembering configurations for non-existent devices by maintaining separate data structures for configuration. This behavior is completely out of the usual norms and outright confusing; furthermore, it uses dev_t number to match the configuration to devices, which is unpredictable to begin with and becomes completely unuseable if EXT_DEVT is fully used. It is wholely unnecessary - we already have fully functional userland mechanism to program devices being hotplugged which has full access to device identification, connection topology and filesystem information. Add a new struct blkio_group_conf which contains all blkcg configurations to blkio_group and let blkio_group, which can be created iff the associated device exists and is removed when the associated device goes away, carry all configurations. Note that, after this patch, all newly created blkg's will always have the default configuration (unlimited for throttling and blkcg's weight for propio). This patch makes blkio_policy_node meaningless but doesn't remove it. The next patch will. -v2: Updated to retry after short sleep if blkg lookup/creation failed due to the queue being temporarily bypassed as indicated by -EBUSY return. Pointed out by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:07 +08:00
blkg = blkg_lookup_check(blkcg, pol, q);
if (IS_ERR(blkg)) {
ret = PTR_ERR(blkg);
goto fail_unlock;
}
if (blkg)
goto success;
/*
* Create blkgs walking down from blkcg_root to @blkcg, so that all
* non-root blkgs have access to their parents.
*/
while (true) {
struct blkcg *pos = blkcg;
struct blkcg *parent;
struct blkcg_gq *new_blkg;
parent = blkcg_parent(blkcg);
while (parent && !__blkg_lookup(parent, q, false)) {
pos = parent;
parent = blkcg_parent(parent);
}
/* Drop locks to do new blkg allocation with GFP_KERNEL. */
spin_unlock_irq(q->queue_lock);
rcu_read_unlock();
new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
if (unlikely(!new_blkg)) {
ret = -ENOMEM;
goto fail;
}
rcu_read_lock();
spin_lock_irq(q->queue_lock);
blkg = blkg_lookup_check(pos, pol, q);
if (IS_ERR(blkg)) {
ret = PTR_ERR(blkg);
goto fail_unlock;
}
if (blkg) {
blkg_free(new_blkg);
} else {
blkg = blkg_create(pos, q, new_blkg);
if (unlikely(IS_ERR(blkg))) {
ret = PTR_ERR(blkg);
goto fail_unlock;
}
}
if (pos == blkcg)
goto success;
}
success:
ctx->disk = disk;
ctx->blkg = blkg;
ctx->body = body;
return 0;
fail_unlock:
spin_unlock_irq(q->queue_lock);
rcu_read_unlock();
fail:
put_disk_and_module(disk);
/*
* If queue was bypassing, we should retry. Do so after a
* short msleep(). It isn't strictly necessary but queue
* can be bypassing for some time and it's always nice to
* avoid busy looping.
*/
if (ret == -EBUSY) {
msleep(10);
ret = restart_syscall();
}
return ret;
}
EXPORT_SYMBOL_GPL(blkg_conf_prep);
/**
* blkg_conf_finish - finish up per-blkg config update
* @ctx: blkg_conf_ctx intiailized by blkg_conf_prep()
*
* Finish up after per-blkg config update. This function must be paired
* with blkg_conf_prep().
*/
void blkg_conf_finish(struct blkg_conf_ctx *ctx)
__releases(ctx->disk->queue->queue_lock) __releases(rcu)
{
spin_unlock_irq(ctx->disk->queue->queue_lock);
rcu_read_unlock();
put_disk_and_module(ctx->disk);
}
EXPORT_SYMBOL_GPL(blkg_conf_finish);
blkcg: implement interface for the unified hierarchy blkcg interface grew to be the biggest of all controllers and unfortunately most inconsistent too. The interface files are inconsistent with a number of cloes duplicates. Some files have recursive variants while others don't. There's distinction between normal and leaf weights which isn't intuitive and there are a lot of stat knobs which don't make much sense outside of debugging and expose too much implementation details to userland. In the unified hierarchy, everything is always hierarchical and internal nodes can't have tasks rendering the two structural issues twisting the current interface. The interface has to be updated in a significant anyway and this is a good chance to revamp it as a whole. This patch implements blkcg interface for the unified hierarchy. * (from a previous patch) blkcg is identified by "io" instead of "blkio" on the unified hierarchy. Given that the whole interface is updated anyway, the rename shouldn't carry noticeable conversion overhead. * The original interface consisted of 27 files is replaced with the following three files. blkio.stat : per-blkcg stats blkio.weight : per-cgroup and per-cgroup-queue weight settings blkio.max : per-cgroup-queue bps and iops max limits Documentation/cgroups/unified-hierarchy.txt updated accordingly. v2: blkcg_policy->dfl_cftypes wasn't removed on blkcg_policy_unregister() corrupting the cftypes list. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:34 +08:00
static int blkcg_print_stat(struct seq_file *sf, void *v)
{
struct blkcg *blkcg = css_to_blkcg(seq_css(sf));
struct blkcg_gq *blkg;
rcu_read_lock();
hlist_for_each_entry_rcu(blkg, &blkcg->blkg_list, blkcg_node) {
const char *dname;
struct blkg_rwstat rwstat;
u64 rbytes, wbytes, rios, wios;
dname = blkg_dev_name(blkg);
if (!dname)
continue;
spin_lock_irq(blkg->q->queue_lock);
rwstat = blkg_rwstat_recursive_sum(blkg, NULL,
offsetof(struct blkcg_gq, stat_bytes));
rbytes = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_READ]);
wbytes = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_WRITE]);
rwstat = blkg_rwstat_recursive_sum(blkg, NULL,
offsetof(struct blkcg_gq, stat_ios));
rios = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_READ]);
wios = atomic64_read(&rwstat.aux_cnt[BLKG_RWSTAT_WRITE]);
spin_unlock_irq(blkg->q->queue_lock);
if (rbytes || wbytes || rios || wios)
seq_printf(sf, "%s rbytes=%llu wbytes=%llu rios=%llu wios=%llu\n",
dname, rbytes, wbytes, rios, wios);
}
rcu_read_unlock();
return 0;
}
static struct cftype blkcg_files[] = {
blkcg: implement interface for the unified hierarchy blkcg interface grew to be the biggest of all controllers and unfortunately most inconsistent too. The interface files are inconsistent with a number of cloes duplicates. Some files have recursive variants while others don't. There's distinction between normal and leaf weights which isn't intuitive and there are a lot of stat knobs which don't make much sense outside of debugging and expose too much implementation details to userland. In the unified hierarchy, everything is always hierarchical and internal nodes can't have tasks rendering the two structural issues twisting the current interface. The interface has to be updated in a significant anyway and this is a good chance to revamp it as a whole. This patch implements blkcg interface for the unified hierarchy. * (from a previous patch) blkcg is identified by "io" instead of "blkio" on the unified hierarchy. Given that the whole interface is updated anyway, the rename shouldn't carry noticeable conversion overhead. * The original interface consisted of 27 files is replaced with the following three files. blkio.stat : per-blkcg stats blkio.weight : per-cgroup and per-cgroup-queue weight settings blkio.max : per-cgroup-queue bps and iops max limits Documentation/cgroups/unified-hierarchy.txt updated accordingly. v2: blkcg_policy->dfl_cftypes wasn't removed on blkcg_policy_unregister() corrupting the cftypes list. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:34 +08:00
{
.name = "stat",
.flags = CFTYPE_NOT_ON_ROOT,
blkcg: implement interface for the unified hierarchy blkcg interface grew to be the biggest of all controllers and unfortunately most inconsistent too. The interface files are inconsistent with a number of cloes duplicates. Some files have recursive variants while others don't. There's distinction between normal and leaf weights which isn't intuitive and there are a lot of stat knobs which don't make much sense outside of debugging and expose too much implementation details to userland. In the unified hierarchy, everything is always hierarchical and internal nodes can't have tasks rendering the two structural issues twisting the current interface. The interface has to be updated in a significant anyway and this is a good chance to revamp it as a whole. This patch implements blkcg interface for the unified hierarchy. * (from a previous patch) blkcg is identified by "io" instead of "blkio" on the unified hierarchy. Given that the whole interface is updated anyway, the rename shouldn't carry noticeable conversion overhead. * The original interface consisted of 27 files is replaced with the following three files. blkio.stat : per-blkcg stats blkio.weight : per-cgroup and per-cgroup-queue weight settings blkio.max : per-cgroup-queue bps and iops max limits Documentation/cgroups/unified-hierarchy.txt updated accordingly. v2: blkcg_policy->dfl_cftypes wasn't removed on blkcg_policy_unregister() corrupting the cftypes list. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:34 +08:00
.seq_show = blkcg_print_stat,
},
{ } /* terminate */
};
static struct cftype blkcg_legacy_files[] = {
2010-04-09 14:31:19 +08:00
{
.name = "reset_stats",
.write_u64 = blkcg_reset_stats,
},
{ } /* terminate */
};
/**
* blkcg_css_offline - cgroup css_offline callback
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
* @css: css of interest
*
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
* This function is called when @css is about to go away and responsible
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
* for offlining all blkgs pd and killing all wbs associated with @css.
* blkgs pd offline should be done while holding both q and blkcg locks.
* As blkcg lock is nested inside q lock, this function performs reverse
* double lock dancing.
*
* This is the blkcg counterpart of ioc_release_fn().
*/
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
static void blkcg_css_offline(struct cgroup_subsys_state *css)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
struct blkcg *blkcg = css_to_blkcg(css);
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
struct blkcg_gq *blkg;
spin_lock_irq(&blkcg->lock);
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
hlist_for_each_entry(blkg, &blkcg->blkg_list, blkcg_node) {
struct request_queue *q = blkg->q;
if (spin_trylock(q->queue_lock)) {
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
blkg_pd_offline(blkg);
spin_unlock(q->queue_lock);
} else {
spin_unlock_irq(&blkcg->lock);
cpu_relax();
spin_lock_irq(&blkcg->lock);
}
}
spin_unlock_irq(&blkcg->lock);
writeback: make backing_dev_info host cgroup-specific bdi_writebacks For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:13:37 +08:00
wb_blkcg_offline(blkcg);
}
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
/**
* blkcg_destroy_all_blkgs - destroy all blkgs associated with a blkcg
* @blkcg: blkcg of interest
*
* This function is called when blkcg css is about to free and responsible for
* destroying all blkgs associated with @blkcg.
* blkgs should be removed while holding both q and blkcg locks. As blkcg lock
* is nested inside q lock, this function performs reverse double lock dancing.
*/
static void blkcg_destroy_all_blkgs(struct blkcg *blkcg)
{
spin_lock_irq(&blkcg->lock);
while (!hlist_empty(&blkcg->blkg_list)) {
struct blkcg_gq *blkg = hlist_entry(blkcg->blkg_list.first,
struct blkcg_gq,
blkcg_node);
struct request_queue *q = blkg->q;
if (spin_trylock(q->queue_lock)) {
blkg_destroy(blkg);
spin_unlock(q->queue_lock);
} else {
spin_unlock_irq(&blkcg->lock);
cpu_relax();
spin_lock_irq(&blkcg->lock);
}
}
spin_unlock_irq(&blkcg->lock);
}
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
static void blkcg_css_free(struct cgroup_subsys_state *css)
{
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
struct blkcg *blkcg = css_to_blkcg(css);
int i;
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
blkcg_destroy_all_blkgs(blkcg);
mutex_lock(&blkcg_pol_mutex);
list_del(&blkcg->all_blkcgs_node);
for (i = 0; i < BLKCG_MAX_POLS; i++)
if (blkcg->cpd[i])
blkcg_policy[i]->cpd_free_fn(blkcg->cpd[i]);
mutex_unlock(&blkcg_pol_mutex);
kfree(blkcg);
}
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
static struct cgroup_subsys_state *
blkcg_css_alloc(struct cgroup_subsys_state *parent_css)
{
struct blkcg *blkcg;
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
struct cgroup_subsys_state *ret;
int i;
mutex_lock(&blkcg_pol_mutex);
cgroup: pass around cgroup_subsys_state instead of cgroup in subsystem methods cgroup is currently in the process of transitioning to using struct cgroup_subsys_state * as the primary handle instead of struct cgroup * in subsystem implementations for the following reasons. * With unified hierarchy, subsystems will be dynamically bound and unbound from cgroups and thus css's (cgroup_subsys_state) may be created and destroyed dynamically over the lifetime of a cgroup, which is different from the current state where all css's are allocated and destroyed together with the associated cgroup. This in turn means that cgroup_css() should be synchronized and may return NULL, making it more cumbersome to use. * Differing levels of per-subsystem granularity in the unified hierarchy means that the task and descendant iterators should behave differently depending on the specific subsystem the iteration is being performed for. * In majority of the cases, subsystems only care about its part in the cgroup hierarchy - ie. the hierarchy of css's. Subsystem methods often obtain the matching css pointer from the cgroup and don't bother with the cgroup pointer itself. Passing around css fits much better. This patch converts all cgroup_subsys methods to take @css instead of @cgroup. The conversions are mostly straight-forward. A few noteworthy changes are * ->css_alloc() now takes css of the parent cgroup rather than the pointer to the new cgroup as the css for the new cgroup doesn't exist yet. Knowing the parent css is enough for all the existing subsystems. * In kernel/cgroup.c::offline_css(), unnecessary open coded css dereference is replaced with local variable access. This patch shouldn't cause any behavior differences. v2: Unnecessary explicit cgrp->subsys[] deref in css_online() replaced with local variable @css as suggested by Li Zefan. Rebased on top of new for-3.12 which includes for-3.11-fixes so that ->css_free() invocation added by da0a12caff ("cgroup: fix a leak when percpu_ref_init() fails") is converted too. Suggested by Li Zefan. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Li Zefan <lizefan@huawei.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Aristeu Rozanski <aris@redhat.com> Acked-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Matt Helsley <matthltc@us.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-08-09 08:11:23 +08:00
if (!parent_css) {
blkcg = &blkcg_root;
} else {
blkcg = kzalloc(sizeof(*blkcg), GFP_KERNEL);
if (!blkcg) {
ret = ERR_PTR(-ENOMEM);
goto unlock;
}
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
}
for (i = 0; i < BLKCG_MAX_POLS ; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
struct blkcg_policy_data *cpd;
/*
* If the policy hasn't been attached yet, wait for it
* to be attached before doing anything else. Otherwise,
* check if the policy requires any specific per-cgroup
* data: if it does, allocate and initialize it.
*/
if (!pol || !pol->cpd_alloc_fn)
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
continue;
cpd = pol->cpd_alloc_fn(GFP_KERNEL);
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
if (!cpd) {
ret = ERR_PTR(-ENOMEM);
goto free_pd_blkcg;
}
blkcg->cpd[i] = cpd;
cpd->blkcg = blkcg;
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
cpd->plid = i;
if (pol->cpd_init_fn)
pol->cpd_init_fn(cpd);
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
}
spin_lock_init(&blkcg->lock);
INIT_RADIX_TREE(&blkcg->blkg_tree, GFP_NOWAIT | __GFP_NOWARN);
INIT_HLIST_HEAD(&blkcg->blkg_list);
writeback: make backing_dev_info host cgroup-specific bdi_writebacks For the planned cgroup writeback support, on each bdi (backing_dev_info), each memcg will be served by a separate wb (bdi_writeback). This patch updates bdi so that a bdi can host multiple wbs (bdi_writebacks). On the default hierarchy, blkcg implicitly enables memcg. This allows using memcg's page ownership for attributing writeback IOs, and every memcg - blkcg combination can be served by its own wb by assigning a dedicated wb to each memcg. This means that there may be multiple wb's of a bdi mapped to the same blkcg. As congested state is per blkcg - bdi combination, those wb's should share the same congested state. This is achieved by tracking congested state via bdi_writeback_congested structs which are keyed by blkcg. bdi->wb remains unchanged and will keep serving the root cgroup. cgwb's (cgroup wb's) for non-root cgroups are created on-demand or looked up while dirtying an inode according to the memcg of the page being dirtied or current task. Each cgwb is indexed on bdi->cgwb_tree by its memcg id. Once an inode is associated with its wb, it can be retrieved using inode_to_wb(). Currently, none of the filesystems has FS_CGROUP_WRITEBACK and all pages will keep being associated with bdi->wb. v3: inode_attach_wb() in account_page_dirtied() moved inside mapping_cap_account_dirty() block where it's known to be !NULL. Also, an unnecessary NULL check before kfree() removed. Both detected by the kbuild bot. v2: Updated so that wb association is per inode and wb is per memcg rather than blkcg. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-05-23 05:13:37 +08:00
#ifdef CONFIG_CGROUP_WRITEBACK
INIT_LIST_HEAD(&blkcg->cgwb_list);
#endif
list_add_tail(&blkcg->all_blkcgs_node, &all_blkcgs);
mutex_unlock(&blkcg_pol_mutex);
return &blkcg->css;
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
free_pd_blkcg:
for (i--; i >= 0; i--)
if (blkcg->cpd[i])
blkcg_policy[i]->cpd_free_fn(blkcg->cpd[i]);
if (blkcg != &blkcg_root)
kfree(blkcg);
unlock:
mutex_unlock(&blkcg_pol_mutex);
block, cgroup: implement policy-specific per-blkcg data The block IO (blkio) controller enables the block layer to provide service guarantees in a hierarchical fashion. Specifically, service guarantees are provided by registered request-accounting policies. As of now, a proportional-share and a throttling policy are available. They are implemented, respectively, by the CFQ I/O scheduler and the blk-throttle subsystem. Unfortunately, as for adding new policies, the current implementation of the block IO controller is only halfway ready to allow new policies to be plugged in. This commit provides a solution to make the block IO controller fully ready to handle new policies. In what follows, we first describe briefly the current state, and then list the changes made by this commit. The throttling policy does not need any per-cgroup information to perform its task. In contrast, the proportional share policy uses, for each cgroup, both the weight assigned by the user to the cgroup, and a set of dynamically- computed weights, one for each device. The first, user-defined weight is stored in the blkcg data structure: the block IO controller allocates a private blkcg data structure for each cgroup in the blkio cgroups hierarchy (regardless of which policy is active). In other words, the block IO controller internally mirrors the blkio cgroups with private blkcg data structures. On the other hand, for each cgroup and device, the corresponding dynamically- computed weight is maintained in the following, different way. For each device, the block IO controller keeps a private blkcg_gq structure for each cgroup in blkio. In other words, block IO also keeps one private mirror copy of the blkio cgroups hierarchy for each device, made of blkcg_gq structures. Each blkcg_gq structure keeps per-policy information in a generic array of dynamically-allocated 'dedicated' data structures, one for each registered policy (so currently the array contains two elements). To be inserted into the generic array, each dedicated data structure embeds a generic blkg_policy_data structure. Consider now the array contained in the blkcg_gq structure corresponding to a given pair of cgroup and device: one of the elements of the array contains the dedicated data structure for the proportional-share policy, and this dedicated data structure contains the dynamically-computed weight for that pair of cgroup and device. The generic strategy adopted for storing per-policy data in blkcg_gq structures is already capable of handling new policies, whereas the one adopted with blkcg structures is not, because per-policy data are hard-coded in the blkcg structures themselves (currently only data related to the proportional- share policy). This commit addresses the above issues through the following changes: . It generalizes blkcg structures so that per-policy data are stored in the same way as in blkcg_gq structures. Specifically, it lets also the blkcg structure store per-policy data in a generic array of dynamically-allocated dedicated data structures. We will refer to these data structures as blkcg dedicated data structures, to distinguish them from the dedicated data structures inserted in the generic arrays kept by blkcg_gq structures. To allow blkcg dedicated data structures to be inserted in the generic array inside a blkcg structure, this commit also introduces a new blkcg_policy_data structure, which is the equivalent of blkg_policy_data for blkcg dedicated data structures. . It adds to the blkcg_policy structure, i.e., to the descriptor of a policy, a cpd_size field and a cpd_init field, to be initialized by the policy with, respectively, the size of the blkcg dedicated data structures, and the address of a constructor function for blkcg dedicated data structures. . It moves the CFQ-specific fields embedded in the blkcg data structure (i.e., the fields related to the proportional-share policy), into a new blkcg dedicated data structure called cfq_group_data. Signed-off-by: Paolo Valente <paolo.valente@unimore.it> Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-06 05:38:42 +08:00
return ret;
}
/**
* blkcg_init_queue - initialize blkcg part of request queue
* @q: request_queue to initialize
*
* Called from blk_alloc_queue_node(). Responsible for initializing blkcg
* part of new request_queue @q.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int blkcg_init_queue(struct request_queue *q)
{
struct blkcg_gq *new_blkg, *blkg;
bool preloaded;
int ret;
new_blkg = blkg_alloc(&blkcg_root, q, GFP_KERNEL);
if (!new_blkg)
return -ENOMEM;
preloaded = !radix_tree_preload(GFP_KERNEL);
/* Make sure the root blkg exists. */
rcu_read_lock();
spin_lock_irq(q->queue_lock);
blkg = blkg_create(&blkcg_root, q, new_blkg);
if (IS_ERR(blkg))
goto err_unlock;
q->root_blkg = blkg;
q->root_rl.blkg = blkg;
spin_unlock_irq(q->queue_lock);
rcu_read_unlock();
if (preloaded)
radix_tree_preload_end();
ret = blk_throtl_init(q);
if (ret) {
spin_lock_irq(q->queue_lock);
blkg_destroy_all(q);
spin_unlock_irq(q->queue_lock);
}
return ret;
err_unlock:
spin_unlock_irq(q->queue_lock);
rcu_read_unlock();
if (preloaded)
radix_tree_preload_end();
return PTR_ERR(blkg);
}
/**
* blkcg_drain_queue - drain blkcg part of request_queue
* @q: request_queue to drain
*
* Called from blk_drain_queue(). Responsible for draining blkcg part.
*/
void blkcg_drain_queue(struct request_queue *q)
{
lockdep_assert_held(q->queue_lock);
blkcg: don't call into policy draining if root_blkg is already gone While a queue is being destroyed, all the blkgs are destroyed and its ->root_blkg pointer is set to NULL. If someone else starts to drain while the queue is in this state, the following oops happens. NULL pointer dereference at 0000000000000028 IP: [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230 PGD e4a1067 PUD b773067 PMD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: cfq_iosched(-) [last unloaded: cfq_iosched] CPU: 1 PID: 537 Comm: bash Not tainted 3.16.0-rc3-work+ #2 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88000e222250 ti: ffff88000efd4000 task.ti: ffff88000efd4000 RIP: 0010:[<ffffffff8144e944>] [<ffffffff8144e944>] blk_throtl_drain+0x84/0x230 RSP: 0018:ffff88000efd7bf0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff880015091450 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88000efd7c10 R08: 0000000000000000 R09: 0000000000000001 R10: ffff88000e222250 R11: 0000000000000000 R12: ffff880015091450 R13: ffff880015092e00 R14: ffff880015091d70 R15: ffff88001508fc28 FS: 00007f1332650740(0000) GS:ffff88001fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000028 CR3: 0000000009446000 CR4: 00000000000006e0 Stack: ffffffff8144e8f6 ffff880015091450 0000000000000000 ffff880015091d80 ffff88000efd7c28 ffffffff8144ae2f ffff880015091450 ffff88000efd7c58 ffffffff81427641 ffff880015091450 ffffffff82401f00 ffff880015091450 Call Trace: [<ffffffff8144ae2f>] blkcg_drain_queue+0x1f/0x60 [<ffffffff81427641>] __blk_drain_queue+0x71/0x180 [<ffffffff81429b3e>] blk_queue_bypass_start+0x6e/0xb0 [<ffffffff814498b8>] blkcg_deactivate_policy+0x38/0x120 [<ffffffff8144ec44>] blk_throtl_exit+0x34/0x50 [<ffffffff8144aea5>] blkcg_exit_queue+0x35/0x40 [<ffffffff8142d476>] blk_release_queue+0x26/0xd0 [<ffffffff81454968>] kobject_cleanup+0x38/0x70 [<ffffffff81454848>] kobject_put+0x28/0x60 [<ffffffff81427505>] blk_put_queue+0x15/0x20 [<ffffffff817d07bb>] scsi_device_dev_release_usercontext+0x16b/0x1c0 [<ffffffff810bc339>] execute_in_process_context+0x89/0xa0 [<ffffffff817d064c>] scsi_device_dev_release+0x1c/0x20 [<ffffffff817930e2>] device_release+0x32/0xa0 [<ffffffff81454968>] kobject_cleanup+0x38/0x70 [<ffffffff81454848>] kobject_put+0x28/0x60 [<ffffffff817934d7>] put_device+0x17/0x20 [<ffffffff817d11b9>] __scsi_remove_device+0xa9/0xe0 [<ffffffff817d121b>] scsi_remove_device+0x2b/0x40 [<ffffffff817d1257>] sdev_store_delete+0x27/0x30 [<ffffffff81792ca8>] dev_attr_store+0x18/0x30 [<ffffffff8126f75e>] sysfs_kf_write+0x3e/0x50 [<ffffffff8126ea87>] kernfs_fop_write+0xe7/0x170 [<ffffffff811f5e9f>] vfs_write+0xaf/0x1d0 [<ffffffff811f69bd>] SyS_write+0x4d/0xc0 [<ffffffff81d24692>] system_call_fastpath+0x16/0x1b 776687bce42b ("block, blk-mq: draining can't be skipped even if bypass_depth was non-zero") made it easier to trigger this bug by making blk_queue_bypass_start() drain even when it loses the first bypass test to blk_cleanup_queue(); however, the bug has always been there even before the commit as blk_queue_bypass_start() could race against queue destruction, win the initial bypass test but perform the actual draining after blk_cleanup_queue() already destroyed all blkgs. Fix it by skippping calling into policy draining if all the blkgs are already gone. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Shirish Pargaonkar <spargaonkar@suse.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Reported-by: Jet Chen <jet.chen@intel.com> Cc: stable@vger.kernel.org Tested-by: Shirish Pargaonkar <spargaonkar@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-07-06 06:43:21 +08:00
/*
* @q could be exiting and already have destroyed all blkgs as
* indicated by NULL root_blkg. If so, don't confuse policies.
*/
if (!q->root_blkg)
return;
blk_throtl_drain(q);
}
/**
* blkcg_exit_queue - exit and release blkcg part of request_queue
* @q: request_queue being released
*
* Called from blk_release_queue(). Responsible for exiting blkcg part.
*/
void blkcg_exit_queue(struct request_queue *q)
{
spin_lock_irq(q->queue_lock);
blkg_destroy_all(q);
spin_unlock_irq(q->queue_lock);
blk_throtl_exit(q);
}
/*
* We cannot support shared io contexts, as we have no mean to support
* two tasks with the same ioc in two different groups without major rework
* of the main cic data structures. For now we allow a task to change
* its cgroup only if it's the only owner of its ioc.
*/
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 23:18:21 +08:00
static int blkcg_can_attach(struct cgroup_taskset *tset)
{
struct task_struct *task;
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 23:18:21 +08:00
struct cgroup_subsys_state *dst_css;
struct io_context *ioc;
int ret = 0;
/* task_lock() is needed to avoid races with exit_io_context() */
cgroup: fix handling of multi-destination migration from subtree_control enabling Consider the following v2 hierarchy. P0 (+memory) --- P1 (-memory) --- A \- B P0 has memory enabled in its subtree_control while P1 doesn't. If both A and B contain processes, they would belong to the memory css of P1. Now if memory is enabled on P1's subtree_control, memory csses should be created on both A and B and A's processes should be moved to the former and B's processes the latter. IOW, enabling controllers can cause atomic migrations into different csses. The core cgroup migration logic has been updated accordingly but the controller migration methods haven't and still assume that all tasks migrate to a single target css; furthermore, the methods were fed the css in which subtree_control was updated which is the parent of the target csses. pids controller depends on the migration methods to move charges and this made the controller attribute charges to the wrong csses often triggering the following warning by driving a counter negative. WARNING: CPU: 1 PID: 1 at kernel/cgroup_pids.c:97 pids_cancel.constprop.6+0x31/0x40() Modules linked in: CPU: 1 PID: 1 Comm: systemd Not tainted 4.4.0-rc1+ #29 ... ffffffff81f65382 ffff88007c043b90 ffffffff81551ffc 0000000000000000 ffff88007c043bc8 ffffffff810de202 ffff88007a752000 ffff88007a29ab00 ffff88007c043c80 ffff88007a1d8400 0000000000000001 ffff88007c043bd8 Call Trace: [<ffffffff81551ffc>] dump_stack+0x4e/0x82 [<ffffffff810de202>] warn_slowpath_common+0x82/0xc0 [<ffffffff810de2fa>] warn_slowpath_null+0x1a/0x20 [<ffffffff8118e031>] pids_cancel.constprop.6+0x31/0x40 [<ffffffff8118e0fd>] pids_can_attach+0x6d/0xf0 [<ffffffff81188a4c>] cgroup_taskset_migrate+0x6c/0x330 [<ffffffff81188e05>] cgroup_migrate+0xf5/0x190 [<ffffffff81189016>] cgroup_attach_task+0x176/0x200 [<ffffffff8118949d>] __cgroup_procs_write+0x2ad/0x460 [<ffffffff81189684>] cgroup_procs_write+0x14/0x20 [<ffffffff811854e5>] cgroup_file_write+0x35/0x1c0 [<ffffffff812e26f1>] kernfs_fop_write+0x141/0x190 [<ffffffff81265f88>] __vfs_write+0x28/0xe0 [<ffffffff812666fc>] vfs_write+0xac/0x1a0 [<ffffffff81267019>] SyS_write+0x49/0xb0 [<ffffffff81bcef32>] entry_SYSCALL_64_fastpath+0x12/0x76 This patch fixes the bug by removing @css parameter from the three migration methods, ->can_attach, ->cancel_attach() and ->attach() and updating cgroup_taskset iteration helpers also return the destination css in addition to the task being migrated. All controllers are updated accordingly. * Controllers which don't care whether there are one or multiple target csses can be converted trivially. cpu, io, freezer, perf, netclassid and netprio fall in this category. * cpuset's current implementation assumes that there's single source and destination and thus doesn't support v2 hierarchy already. The only change made by this patchset is how that single destination css is obtained. * memory migration path already doesn't do anything on v2. How the single destination css is obtained is updated and the prep stage of mem_cgroup_can_attach() is reordered to accomodate the change. * pids is the only controller which was affected by this bug. It now correctly handles multi-destination migrations and no longer causes counter underflow from incorrect accounting. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-and-tested-by: Daniel Wagner <daniel.wagner@bmw-carit.de> Cc: Aleksa Sarai <cyphar@cyphar.com>
2015-12-03 23:18:21 +08:00
cgroup_taskset_for_each(task, dst_css, tset) {
task_lock(task);
ioc = task->io_context;
if (ioc && atomic_read(&ioc->nr_tasks) > 1)
ret = -EINVAL;
task_unlock(task);
if (ret)
break;
}
return ret;
}
static void blkcg_bind(struct cgroup_subsys_state *root_css)
{
int i;
mutex_lock(&blkcg_pol_mutex);
for (i = 0; i < BLKCG_MAX_POLS; i++) {
struct blkcg_policy *pol = blkcg_policy[i];
struct blkcg *blkcg;
if (!pol || !pol->cpd_bind_fn)
continue;
list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node)
if (blkcg->cpd[pol->plid])
pol->cpd_bind_fn(blkcg->cpd[pol->plid]);
}
mutex_unlock(&blkcg_pol_mutex);
}
blkcg: rename subsystem name from blkio to io blkio interface has become messy over time and is currently the largest. In addition to the inconsistent naming scheme, it has multiple stat files which report more or less the same thing, a number of debug stat files which expose internal details which shouldn't have been part of the public interface in the first place, recursive and non-recursive stats and leaf and non-leaf knobs. Both recursive vs. non-recursive and leaf vs. non-leaf distinctions don't make any sense on the unified hierarchy as only leaf cgroups can contain processes. cgroups is going through a major interface revision with the unified hierarchy involving significant fundamental usage changes and given that a significant portion of the interface doesn't make sense anymore, it's a good time to reorganize the interface. As the first step, this patch renames the external visible subsystem name from "blkio" to "io". This is more concise, matches the other two major subsystem names, "cpu" and "memory", and better suited as blkcg will be involved in anything writeback related too whether an actual block device is involved or not. As the subsystem legacy_name is set to "blkio", the only userland visible change outside the unified hierarchy is that blkcg is reported as "io" instead of "blkio" in the subsystem initialized message during boot. On the unified hierarchy, blkcg now appears as "io". Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:29 +08:00
struct cgroup_subsys io_cgrp_subsys = {
.css_alloc = blkcg_css_alloc,
.css_offline = blkcg_css_offline,
.css_free = blkcg_css_free,
.can_attach = blkcg_can_attach,
.bind = blkcg_bind,
blkcg: implement interface for the unified hierarchy blkcg interface grew to be the biggest of all controllers and unfortunately most inconsistent too. The interface files are inconsistent with a number of cloes duplicates. Some files have recursive variants while others don't. There's distinction between normal and leaf weights which isn't intuitive and there are a lot of stat knobs which don't make much sense outside of debugging and expose too much implementation details to userland. In the unified hierarchy, everything is always hierarchical and internal nodes can't have tasks rendering the two structural issues twisting the current interface. The interface has to be updated in a significant anyway and this is a good chance to revamp it as a whole. This patch implements blkcg interface for the unified hierarchy. * (from a previous patch) blkcg is identified by "io" instead of "blkio" on the unified hierarchy. Given that the whole interface is updated anyway, the rename shouldn't carry noticeable conversion overhead. * The original interface consisted of 27 files is replaced with the following three files. blkio.stat : per-blkcg stats blkio.weight : per-cgroup and per-cgroup-queue weight settings blkio.max : per-cgroup-queue bps and iops max limits Documentation/cgroups/unified-hierarchy.txt updated accordingly. v2: blkcg_policy->dfl_cftypes wasn't removed on blkcg_policy_unregister() corrupting the cftypes list. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:34 +08:00
.dfl_cftypes = blkcg_files,
.legacy_cftypes = blkcg_legacy_files,
blkcg: rename subsystem name from blkio to io blkio interface has become messy over time and is currently the largest. In addition to the inconsistent naming scheme, it has multiple stat files which report more or less the same thing, a number of debug stat files which expose internal details which shouldn't have been part of the public interface in the first place, recursive and non-recursive stats and leaf and non-leaf knobs. Both recursive vs. non-recursive and leaf vs. non-leaf distinctions don't make any sense on the unified hierarchy as only leaf cgroups can contain processes. cgroups is going through a major interface revision with the unified hierarchy involving significant fundamental usage changes and given that a significant portion of the interface doesn't make sense anymore, it's a good time to reorganize the interface. As the first step, this patch renames the external visible subsystem name from "blkio" to "io". This is more concise, matches the other two major subsystem names, "cpu" and "memory", and better suited as blkcg will be involved in anything writeback related too whether an actual block device is involved or not. As the subsystem legacy_name is set to "blkio", the only userland visible change outside the unified hierarchy is that blkcg is reported as "io" instead of "blkio" in the subsystem initialized message during boot. On the unified hierarchy, blkcg now appears as "io". Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:29 +08:00
.legacy_name = "blkio",
#ifdef CONFIG_MEMCG
/*
* This ensures that, if available, memcg is automatically enabled
* together on the default hierarchy so that the owner cgroup can
* be retrieved from writeback pages.
*/
.depends_on = 1 << memory_cgrp_id,
#endif
};
blkcg: rename subsystem name from blkio to io blkio interface has become messy over time and is currently the largest. In addition to the inconsistent naming scheme, it has multiple stat files which report more or less the same thing, a number of debug stat files which expose internal details which shouldn't have been part of the public interface in the first place, recursive and non-recursive stats and leaf and non-leaf knobs. Both recursive vs. non-recursive and leaf vs. non-leaf distinctions don't make any sense on the unified hierarchy as only leaf cgroups can contain processes. cgroups is going through a major interface revision with the unified hierarchy involving significant fundamental usage changes and given that a significant portion of the interface doesn't make sense anymore, it's a good time to reorganize the interface. As the first step, this patch renames the external visible subsystem name from "blkio" to "io". This is more concise, matches the other two major subsystem names, "cpu" and "memory", and better suited as blkcg will be involved in anything writeback related too whether an actual block device is involved or not. As the subsystem legacy_name is set to "blkio", the only userland visible change outside the unified hierarchy is that blkcg is reported as "io" instead of "blkio" in the subsystem initialized message during boot. On the unified hierarchy, blkcg now appears as "io". Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:29 +08:00
EXPORT_SYMBOL_GPL(io_cgrp_subsys);
/**
* blkcg_activate_policy - activate a blkcg policy on a request_queue
* @q: request_queue of interest
* @pol: blkcg policy to activate
*
* Activate @pol on @q. Requires %GFP_KERNEL context. @q goes through
* bypass mode to populate its blkgs with policy_data for @pol.
*
* Activation happens with @q bypassed, so nobody would be accessing blkgs
* from IO path. Update of each blkg is protected by both queue and blkcg
* locks so that holding either lock and testing blkcg_policy_enabled() is
* always enough for dereferencing policy data.
*
* The caller is responsible for synchronizing [de]activations and policy
* [un]registerations. Returns 0 on success, -errno on failure.
*/
int blkcg_activate_policy(struct request_queue *q,
const struct blkcg_policy *pol)
{
struct blkg_policy_data *pd_prealloc = NULL;
struct blkcg_gq *blkg;
int ret;
if (blkcg_policy_enabled(q, pol))
return 0;
if (q->mq_ops)
blk_mq_freeze_queue(q);
else
blk_queue_bypass_start(q);
pd_prealloc:
if (!pd_prealloc) {
pd_prealloc = pol->pd_alloc_fn(GFP_KERNEL, q->node);
if (!pd_prealloc) {
ret = -ENOMEM;
goto out_bypass_end;
}
}
spin_lock_irq(q->queue_lock);
list_for_each_entry(blkg, &q->blkg_list, q_node) {
struct blkg_policy_data *pd;
if (blkg->pd[pol->plid])
continue;
pd = pol->pd_alloc_fn(GFP_NOWAIT | __GFP_NOWARN, q->node);
if (!pd)
swap(pd, pd_prealloc);
if (!pd) {
spin_unlock_irq(q->queue_lock);
goto pd_prealloc;
}
blkg->pd[pol->plid] = pd;
pd->blkg = blkg;
pd->plid = pol->plid;
if (pol->pd_init_fn)
pol->pd_init_fn(pd);
}
__set_bit(pol->plid, q->blkcg_pols);
ret = 0;
spin_unlock_irq(q->queue_lock);
out_bypass_end:
if (q->mq_ops)
blk_mq_unfreeze_queue(q);
else
blk_queue_bypass_end(q);
if (pd_prealloc)
pol->pd_free_fn(pd_prealloc);
return ret;
}
EXPORT_SYMBOL_GPL(blkcg_activate_policy);
/**
* blkcg_deactivate_policy - deactivate a blkcg policy on a request_queue
* @q: request_queue of interest
* @pol: blkcg policy to deactivate
*
* Deactivate @pol on @q. Follows the same synchronization rules as
* blkcg_activate_policy().
*/
void blkcg_deactivate_policy(struct request_queue *q,
const struct blkcg_policy *pol)
{
struct blkcg_gq *blkg;
if (!blkcg_policy_enabled(q, pol))
return;
if (q->mq_ops)
blk_mq_freeze_queue(q);
else
blk_queue_bypass_start(q);
spin_lock_irq(q->queue_lock);
__clear_bit(pol->plid, q->blkcg_pols);
list_for_each_entry(blkg, &q->blkg_list, q_node) {
if (blkg->pd[pol->plid]) {
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
if (!blkg->pd[pol->plid]->offline &&
pol->pd_offline_fn) {
pol->pd_offline_fn(blkg->pd[pol->plid]);
blk-throttle: fix race between blkcg_bio_issue_check() and cgroup_rmdir() We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae1188963611 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-16 14:51:27 +08:00
blkg->pd[pol->plid]->offline = true;
}
pol->pd_free_fn(blkg->pd[pol->plid]);
blkg->pd[pol->plid] = NULL;
}
}
spin_unlock_irq(q->queue_lock);
if (q->mq_ops)
blk_mq_unfreeze_queue(q);
else
blk_queue_bypass_end(q);
}
EXPORT_SYMBOL_GPL(blkcg_deactivate_policy);
/**
* blkcg_policy_register - register a blkcg policy
* @pol: blkcg policy to register
*
* Register @pol with blkcg core. Might sleep and @pol may be modified on
* successful registration. Returns 0 on success and -errno on failure.
*/
int blkcg_policy_register(struct blkcg_policy *pol)
{
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
struct blkcg *blkcg;
int i, ret;
blkcg: unify blkg's for blkcg policies Currently, blkg is per cgroup-queue-policy combination. This is unnatural and leads to various convolutions in partially used duplicate fields in blkg, config / stat access, and general management of blkgs. This patch make blkg's per cgroup-queue and let them serve all policies. blkgs are now created and destroyed by blkcg core proper. This will allow further consolidation of common management logic into blkcg core and API with better defined semantics and layering. As a transitional step to untangle blkg management, elvswitch and policy [de]registration, all blkgs except the root blkg are being shot down during elvswitch and bypass. This patch adds blkg_root_update() to update root blkg in place on policy change. This is hacky and racy but should be good enough as interim step until we get locking simplified and switch over to proper in-place update for all blkgs. -v2: Root blkgs need to be updated on elvswitch too and blkg_alloc() comment wasn't updated according to the function change. Fixed. Both pointed out by Vivek. -v3: v2 updated blkg_destroy_all() to invoke update_root_blkg_pd() for all policies. This freed root pd during elvswitch before the last queue finished exiting and led to oops. Directly invoke update_root_blkg_pd() only on BLKIO_POLICY_PROP from cfq_exit_queue(). This also is closer to what will be done with proper in-place blkg update. Reported by Vivek. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2012-03-06 05:15:20 +08:00
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_lock(&blkcg_pol_register_mutex);
mutex_lock(&blkcg_pol_mutex);
/* find an empty slot */
ret = -ENOSPC;
for (i = 0; i < BLKCG_MAX_POLS; i++)
if (!blkcg_policy[i])
break;
if (i >= BLKCG_MAX_POLS)
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
goto err_unlock;
/* Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs */
if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) ||
(!pol->pd_alloc_fn ^ !pol->pd_free_fn))
goto err_unlock;
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
/* register @pol */
pol->plid = i;
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
blkcg_policy[pol->plid] = pol;
/* allocate and install cpd's */
if (pol->cpd_alloc_fn) {
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
struct blkcg_policy_data *cpd;
cpd = pol->cpd_alloc_fn(GFP_KERNEL);
if (!cpd)
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
goto err_free_cpds;
blkcg->cpd[pol->plid] = cpd;
cpd->blkcg = blkcg;
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
cpd->plid = pol->plid;
pol->cpd_init_fn(cpd);
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
}
}
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_unlock(&blkcg_pol_mutex);
/* everything is in place, add intf files for the new policy */
blkcg: implement interface for the unified hierarchy blkcg interface grew to be the biggest of all controllers and unfortunately most inconsistent too. The interface files are inconsistent with a number of cloes duplicates. Some files have recursive variants while others don't. There's distinction between normal and leaf weights which isn't intuitive and there are a lot of stat knobs which don't make much sense outside of debugging and expose too much implementation details to userland. In the unified hierarchy, everything is always hierarchical and internal nodes can't have tasks rendering the two structural issues twisting the current interface. The interface has to be updated in a significant anyway and this is a good chance to revamp it as a whole. This patch implements blkcg interface for the unified hierarchy. * (from a previous patch) blkcg is identified by "io" instead of "blkio" on the unified hierarchy. Given that the whole interface is updated anyway, the rename shouldn't carry noticeable conversion overhead. * The original interface consisted of 27 files is replaced with the following three files. blkio.stat : per-blkcg stats blkio.weight : per-cgroup and per-cgroup-queue weight settings blkio.max : per-cgroup-queue bps and iops max limits Documentation/cgroups/unified-hierarchy.txt updated accordingly. v2: blkcg_policy->dfl_cftypes wasn't removed on blkcg_policy_unregister() corrupting the cftypes list. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:34 +08:00
if (pol->dfl_cftypes)
WARN_ON(cgroup_add_dfl_cftypes(&io_cgrp_subsys,
pol->dfl_cftypes));
if (pol->legacy_cftypes)
blkcg: rename subsystem name from blkio to io blkio interface has become messy over time and is currently the largest. In addition to the inconsistent naming scheme, it has multiple stat files which report more or less the same thing, a number of debug stat files which expose internal details which shouldn't have been part of the public interface in the first place, recursive and non-recursive stats and leaf and non-leaf knobs. Both recursive vs. non-recursive and leaf vs. non-leaf distinctions don't make any sense on the unified hierarchy as only leaf cgroups can contain processes. cgroups is going through a major interface revision with the unified hierarchy involving significant fundamental usage changes and given that a significant portion of the interface doesn't make sense anymore, it's a good time to reorganize the interface. As the first step, this patch renames the external visible subsystem name from "blkio" to "io". This is more concise, matches the other two major subsystem names, "cpu" and "memory", and better suited as blkcg will be involved in anything writeback related too whether an actual block device is involved or not. As the subsystem legacy_name is set to "blkio", the only userland visible change outside the unified hierarchy is that blkcg is reported as "io" instead of "blkio" in the subsystem initialized message during boot. On the unified hierarchy, blkcg now appears as "io". Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: cgroups@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:29 +08:00
WARN_ON(cgroup_add_legacy_cftypes(&io_cgrp_subsys,
pol->legacy_cftypes));
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_unlock(&blkcg_pol_register_mutex);
return 0;
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
err_free_cpds:
if (pol->cpd_free_fn) {
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
if (blkcg->cpd[pol->plid]) {
pol->cpd_free_fn(blkcg->cpd[pol->plid]);
blkcg->cpd[pol->plid] = NULL;
}
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
}
}
blkcg_policy[pol->plid] = NULL;
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
err_unlock:
mutex_unlock(&blkcg_pol_mutex);
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_unlock(&blkcg_pol_register_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(blkcg_policy_register);
/**
* blkcg_policy_unregister - unregister a blkcg policy
* @pol: blkcg policy to unregister
*
* Undo blkcg_policy_register(@pol). Might sleep.
*/
void blkcg_policy_unregister(struct blkcg_policy *pol)
{
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
struct blkcg *blkcg;
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_lock(&blkcg_pol_register_mutex);
if (WARN_ON(blkcg_policy[pol->plid] != pol))
goto out_unlock;
/* kill the intf files first */
blkcg: implement interface for the unified hierarchy blkcg interface grew to be the biggest of all controllers and unfortunately most inconsistent too. The interface files are inconsistent with a number of cloes duplicates. Some files have recursive variants while others don't. There's distinction between normal and leaf weights which isn't intuitive and there are a lot of stat knobs which don't make much sense outside of debugging and expose too much implementation details to userland. In the unified hierarchy, everything is always hierarchical and internal nodes can't have tasks rendering the two structural issues twisting the current interface. The interface has to be updated in a significant anyway and this is a good chance to revamp it as a whole. This patch implements blkcg interface for the unified hierarchy. * (from a previous patch) blkcg is identified by "io" instead of "blkio" on the unified hierarchy. Given that the whole interface is updated anyway, the rename shouldn't carry noticeable conversion overhead. * The original interface consisted of 27 files is replaced with the following three files. blkio.stat : per-blkcg stats blkio.weight : per-cgroup and per-cgroup-queue weight settings blkio.max : per-cgroup-queue bps and iops max limits Documentation/cgroups/unified-hierarchy.txt updated accordingly. v2: blkcg_policy->dfl_cftypes wasn't removed on blkcg_policy_unregister() corrupting the cftypes list. Fixed. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-19 05:55:34 +08:00
if (pol->dfl_cftypes)
cgroup_rm_cftypes(pol->dfl_cftypes);
if (pol->legacy_cftypes)
cgroup_rm_cftypes(pol->legacy_cftypes);
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
/* remove cpds and unregister */
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
mutex_lock(&blkcg_pol_mutex);
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
if (pol->cpd_free_fn) {
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
list_for_each_entry(blkcg, &all_blkcgs, all_blkcgs_node) {
if (blkcg->cpd[pol->plid]) {
pol->cpd_free_fn(blkcg->cpd[pol->plid]);
blkcg->cpd[pol->plid] = NULL;
}
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
}
}
blkcg_policy[pol->plid] = NULL;
blkcg: fix blkcg_policy_data allocation bug e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") updated per-blkcg policy data to be dynamically allocated. When a policy is registered, its policy data aren't created. Instead, when the policy is activated on a queue, the policy data are allocated if there are blkg's (blkcg_gq's) which are attached to a given blkcg. This is buggy. Consider the following scenario. 1. A blkcg is created. No blkg's attached yet. 2. The policy is registered. No policy data is allocated. 3. The policy is activated on a queue. As the above blkcg doesn't have any blkg's, it won't allocate the matching blkcg_policy_data. 4. An IO is issued from the blkcg and blkg is created and the blkcg still doesn't have the matching policy data allocated. With cfq-iosched, this leads to an oops. It also doesn't free policy data on policy unregistration assuming that freeing of all policy data on blkcg destruction should take care of it; however, this also is incorrect. 1. A blkcg has policy data. 2. The policy gets unregistered but the policy data remains. 3. Another policy gets registered on the same slot. 4. Later, the new policy tries to allocate policy data on the previous blkcg but the slot is already occupied and gets skipped. The policy ends up operating on the policy data of the previous policy. There's no reason to manage blkcg_policy_data lazily. The reason we do lazy allocation of blkg's is that the number of all possible blkg's is the product of cgroups and block devices which can reach a surprising level. blkcg_policy_data is contrained by the number of cgroups and shouldn't be a problem. This patch makes blkcg_policy_data to be allocated for all existing blkcg's on policy registration and freed on unregistration and removes blkcg_policy_data handling from policy [de]activation paths. This makes that blkcg_policy_data are created and removed with the policy they belong to and fixes the above described problems. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: e48453c386f3 ("block, cgroup: implement policy-specific per-blkcg data") Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:50 +08:00
mutex_unlock(&blkcg_pol_mutex);
blkcg: allow blkcg_pol_mutex to be grabbed from cgroup [file] methods blkcg_pol_mutex primarily protects the blkcg_policy array. It also protects cgroup file type [un]registration during policy addition / removal. This puts blkcg_pol_mutex outside cgroup internal synchronization and in turn makes it impossible to grab from blkcg's cgroup methods as that leads to cyclic dependency. Another problematic dependency arising from this is through cgroup interface file deactivation. Removing a cftype requires removing all files of the type which in turn involves draining all on-going invocations of the file methods. This means that an interface file implementation can't grab blkcg_pol_mutex as draining can lead to AA deadlock. blkcg_reset_stats() is already in this situation. It currently trylocks blkcg_pol_mutex and then unwinds and retries the whole operation on failure, which is cumbersome at best. It has a lengthy comment explaining how cgroup internal synchronization is involved and expected to be updated but as explained above this doesn't need cgroup internal locking to deadlock. It's a self-contained AA deadlock. The described circular dependencies can be easily broken by moving cftype [un]registration out of blkcg_pol_mutex and protect them with an outer mutex. This patch introduces blkcg_pol_register_mutex which wraps entire policy [un]registration including cftype operations and shrinks blkcg_pol_mutex critical section. This also makes the trylock dancing in blkcg_reset_stats() unnecessary. Removed. This patch is necessary for the following blkcg_policy_data allocation bug fixes. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Arianna Avanzini <avanzini.arianna@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-10 04:39:47 +08:00
out_unlock:
mutex_unlock(&blkcg_pol_register_mutex);
}
EXPORT_SYMBOL_GPL(blkcg_policy_unregister);