openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm64/configs/defconfig

399 lines
8.6 KiB
Plaintext
Raw Normal View History

arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_AUDIT=y
CONFIG_NO_HZ_IDLE=y
CONFIG_HIGH_RES_TIMERS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_CGROUP_HUGETLB=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_JUMP_LABEL=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_ARCH_SUNXI=y
arm64: defconfig: enable the Alpine family Enable the Alpine SoC family in the arm64 defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-25 18:14:53 +08:00
CONFIG_ARCH_ALPINE=y
arm64: Add Broadcom iProc family support This patch adds support to Broadcom's iProc family of arm64 based SoCs in the arm64 Kconfig and defconfig files Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28 06:42:20 +08:00
CONFIG_ARCH_BCM_IPROC=y
arm64: Enable Marvell Berlin SoC family in defconfig Enable Marvell Berlin SoC family in arm64 defconfig. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-04 03:24:46 +08:00
CONFIG_ARCH_BERLIN=y
arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS The ARMv8 Exynos family SoCs in Linux kernel are currently: - Exynos5433 (controlled by ARCH_EXYNOS), - Exynos7 (controlled by ARCH_EXYNOS7). It duplicates Kconfig symbols unnecessarily, so consolidate them into one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS symbol. The commit should not bring any visible functional change. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
2015-11-16 09:09:13 +08:00
CONFIG_ARCH_EXYNOS=y
arm64: Use generic Layerscape SoC family naming Freescale will be a spinning-out a set of ARMv8 based SoCs which will be based on a similar overall SoC architecture. So, this patch converts the existing infrastructure in the arm64/dts, arm64/Kconfig and arm64/configs to use the generic convention ARCH_LAYERSCAPE in place of the more specific FSL_LS2085A, to save code duplication later-on. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-24 03:31:50 +08:00
CONFIG_ARCH_LAYERSCAPE=y
arm64: defconfig: enable ARCH_LG1K Enable building LG1K support in the defconfig. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-11 19:54:45 +08:00
CONFIG_ARCH_LG1K=y
arm64: Enable Hisilicon ARMv8 SoC family in Kconfig and defconfig This patch introduces ARCH_HISI to enable Hisilicon SoC family in Kconfig and defconfig. Signed-off-by: Bintian Wang <bintian.wang@huawei.com> Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org> Reviewed-by: Wei Xu <xuwei5@hisilicon.com> Tested-by: Will Deacon <will.deacon@arm.com> Tested-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2015-01-06 09:30:36 +08:00
CONFIG_ARCH_HISI=y
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-01 17:14:00 +08:00
CONFIG_ARCH_MEDIATEK=y
arm64: defconfig: enable basic boot for Amlogic meson Enables basic arch and serial console support for Amlogic meson family SoCs. Tested with Amlogic P200 and Hardkernel ODROID-C2 boards. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-03-24 02:49:53 +08:00
CONFIG_ARCH_MESON=y
mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEUEABECAAYFAlbElN0ACgkQCwYYjhRyO9XkzgCfaYJggCHzsLpMvnTK1bMNgPCY jYkAmOIRjMJskq40RBXSXpyoJboqyZs= =tAva -----END PGP SIGNATURE----- Merge tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu into next/arm64 mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) * tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable Armada 3700 related config Documentation: arm: update supported Marvell EBU processors MAINTAINERS: Extend dts entry for ARM64 mvebu files arm64: add mvebu architecture entry irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selected ARM: mvebu: Use the ARMADA_370_XP_IRQ option irqchip/armada-370-xp: Allow allocation of multiple MSIs irqchip/armada-370-xp: Use shorter names for irq_chip irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriate irqchip/armada-370-xp: Use the generic MSI infrastructure irqchip/armada-370-xp: Add Kconfig option for the driver Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 08:44:14 +08:00
CONFIG_ARCH_MVEBU=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARCH_QCOM=y
arm64: defconfig: enable ARCH_ROCKCHIP Enable building Rockchip support in the defconfig. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17 06:34:23 +08:00
CONFIG_ARCH_ROCKCHIP=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_ARCH_SEATTLE=y
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC This patch enables the Renesas R-Car H3 SoC together with the SCIF driver in the arm64 defconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-02 10:56:22 +08:00
CONFIG_ARCH_RENESAS=y
CONFIG_ARCH_R8A7795=y
arm64: defconfig: enable Renesas R8A7796 SoC This patch enables the Renesas R8A7796 SoC in the arm64 defconfig. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-05-24 09:54:40 +08:00
CONFIG_ARCH_R8A7796=y
arm64: dts: Add base stratix 10 dtsi Add the base DTS for Altera's SoCFPGA Stratix 10 platform. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> --- v4: Add a non-zero ranges property for /soc node v3: change #address-cells and #size-cells to <2> change the GIC address to 0xfffc1000 update the GIC virtual CPU reg length to 0x2000 v2: use interrupt-affinity for pmu node
2015-08-05 12:25:50 +08:00
CONFIG_ARCH_STRATIX10=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_ARCH_TEGRA=y
arm64: Add support for Spreadtrum's Sharkl64 Platform in Kconfig and defconfig Adds support for Spreadtrum's SoC Platform in the arm64 Kconfig and defconfig files. Signed-off-by: Zhizhou Zhang <zhizhou.zhang@spreadtrum.com> Signed-off-by: Orson Zhai <orson.zhai@spreadtrum.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
2015-03-11 10:27:08 +08:00
CONFIG_ARCH_SPRD=y
arm64, defconfig: Enable Cavium Thunder SoC in defconfig This patch enables Thunder SoCs in the arm64 defconfig. This is esp. useful to add Thunder platforms to automated builds based on arm64 defconfig. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-18 23:51:06 +08:00
CONFIG_ARCH_THUNDER=y
arm64: defconfig: enable UniPhier SoCs support Enable ARCH_UNIPHIER with its on-chip UART driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-24 17:08:29 +08:00
CONFIG_ARCH_UNIPHIER=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_ARCH_VEXPRESS=y
arm64: defconfig: Add Broadcom Vulcan to defconfig Enable Broadcom Vulcan support in arm64 default configuration. This will build the device tree needed to boot on a Broadcom Vulcan board. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-02-20 22:19:22 +08:00
CONFIG_ARCH_VULCAN=y
arm64: Enable APM X-Gene SOC family in the defconfig This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family. Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-24 17:06:58 +08:00
CONFIG_ARCH_XGENE=y
ARM64: Add new Xilinx ZynqMP SoC Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-09 16:41:04 +08:00
CONFIG_ARCH_ZYNQMP=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_PCI=y
CONFIG_PCI_MSI=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_PCI_IOV=y
PCI: rcar-pcie: Remove Gen2 designation from Kconfig It appears that Gen2 is a misnomer for the R-Car PCIE driver which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2 from the help text and Kconfig symbol. Also, re-arange the Kconfig symbol name to use PCIE as the prefix. This appears to be in keeping with other PCIE Kconfig symbols. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-21 11:51:55 +08:00
CONFIG_PCIE_RCAR=y
arm64: defconfig: Enable PCI generic host bridge by default Now that pci-host-generic can be used under arm64, enable it by default so that SBSA compliant systems can use it. Cc: Will Deacon <will.deacon@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2015-10-09 21:10:12 +08:00
CONFIG_PCI_HOST_GENERIC=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_PCI_XGENE=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_PCI_LAYERSCAPE=y
CONFIG_PCI_HISI=y
CONFIG_PCIE_QCOM=y
arm64: configs: enable PCIe driver for Armada 7K/8K This patch enables the driver for the PCIe host controller found on the Marvell Armada 7K/8K ARM64 SoCs. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-05-19 20:11:34 +08:00
CONFIG_PCIE_ARMADA_8K=y
arm64: defconfig: enable 48-bit virtual addresses Some armv8 SoCs (e.g. ls2080a) have physical memory maps with discontiguous DDR regions that require 48-bit VA to have the linear map cover the entire range of DDR. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:34 +08:00
CONFIG_ARM64_VA_BITS_48=y
ARM64: Enable multi-core scheduler support by default Make sure that the task scheduler domain hierarchy is set-up correctly on systems with single or multi-cluster topology. Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Acked-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-20 00:55:49 +08:00
CONFIG_SCHED_MC=y
arm64: defconfig: Enable CONFIG_PREEMPT by default This way we can spot early bugs when just testing with the default config. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-11-05 18:03:53 +08:00
CONFIG_PREEMPT=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_KSM=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_TRANSPARENT_HUGEPAGE=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_CMA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_XEN=y
arm64/kexec: Enable kexec in the arm64 defconfig Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-06-24 01:54:48 +08:00
CONFIG_KEXEC=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_COMPAT=y
arm64: Enable CPU_IDLE in defconfig This patch enables CPU_IDLE and the generic arm64 cpuidle driver (ARM64_CPUIDLE). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-01-28 02:25:25 +08:00
CONFIG_CPU_IDLE=y
ARM: cpuidle: Enable the ARM64 driver for both ARM32/ARM64 ARM32 and ARM64 have the same DT definitions and the same approaches. The generic ARM cpuidle driver can be put in common for those two architectures. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Rob Herring <robherring2@gmail.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2015-02-02 23:32:46 +08:00
CONFIG_ARM_CPUIDLE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_CPU_FREQ=y
CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
CONFIG_ARM_SCPI_CPUFREQ=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IPV6 is not set
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_BPF_JIT=y
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:54 +08:00
CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
CONFIG_RFKILL=m
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
arm64: defconfig: enable devtmpfs mount option Matching x86 and making it more convenient to run the arm64 default kernel as distros like Ubuntu need this option. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-30 23:06:34 +08:00
CONFIG_DEVTMPFS_MOUNT=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_DMA_CMA=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_MTD=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_BLK_DEV_LOOP=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTIO_BLK=y
arm64: defconfig: enable Generic on-chip SRAM driver Most of the ARM SoCs have small SRAM memory used for various purposes that require faster access to data compared to normal DDR. This patch enables the Generic on-chip SRAM driver on ARM64. Cc: Kevin Hilman <khilman@kernel.org> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-20 23:24:08 +08:00
CONFIG_SRAM=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
arm64: defconfig: Enable Hisi SAS and HNS Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-15 15:03:45 +08:00
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_HISI_SAS=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_ATA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SATA_AHCI=y
CONFIG_SATA_AHCI_PLATFORM=y
arm64: defconfig: Add Ceva ahci to the defconfig The Ceva ahci controller is available on the Xilinx Zynq UltraScale+ MPSoC. Signed-off-by: Suneel Garapati <suneel.garapati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [catalin.marinas@arm.com: removed unnecessary defconfig changes] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-29 13:02:08 +08:00
CONFIG_AHCI_CEVA=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_AHCI_MVEBU=y
arm64: configs: Enable X-Gene SATA and ethernet in defconfig Currently when run on an APM platform the ARMv8 defconfig has no viable options for rootfs other than ramdisk which is rather limiting. Since we already have both SATA and the bits needed for NFS root enabled we just need to enable the relevant drivers so do that, helping enable direct testing of upstream. If the configuration ends up becoming too big we can consider modularising some of the drivers and asking people to use an initramfs but for now this is not an issue. Signed-off-by: Mark Brown <broonie@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-08-15 03:57:16 +08:00
CONFIG_AHCI_XGENE=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_AHCI_QORIQ=y
arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs This adds Renesas sata_rcar driver to defconfig. Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-14 23:42:38 +08:00
CONFIG_SATA_RCAR=y
arm64: defconfig: Add Juno SATA controller The ARM Juno (r1 and r2) boards feature a SATA controller soldered on the board and connected to the PCI bus. Add the respective driver to defconfig to get hard disks supported out of the box on the Junos. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-05 17:44:18 +08:00
CONFIG_SATA_SIL24=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NETDEVICES=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_TUN=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_NET=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_AMD_XGBE=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_NET_XGENE=y
arm64: defconfig: Enable Cadence MACB/GEM support This patch enables the cadence MACB/GEM support that is needed by lg1k SoCs. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-01 09:39:59 +08:00
CONFIG_MACB=y
arm64: defconfig: Enable Hisi SAS and HNS Enable Hisi SAS and HNS config for D02/D03 board. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-08-15 15:03:45 +08:00
CONFIG_HNS_DSAF=y
CONFIG_HNS_ENET=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_E1000E=y
CONFIG_IGB=y
CONFIG_IGBVF=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_SKY2=y
arm64: defconfig: enable EthernetAVB This is present on the Renesas r8a7795 SoC and may be used by the Salvator-X board. Also enable MICREL_PHY which is used on the Salvator-X board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-02 12:31:47 +08:00
CONFIG_RAVB=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_SMC91X=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_SMSC911X=y
arm64: defconfig: enable stmmac and realtek PHY as modules Some Amlogic GXBB boards use the stmmac ethernet driver. Also, enable the realtek PHY used on meson-gxbb-odroidc2. The micrel PHY used on the meson-gxbb-p20x boards is already enabled. Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-06-04 06:38:15 +08:00
CONFIG_STMMAC_ETH=m
CONFIG_REALTEK_PHY=m
arm64: defconfig: enable EthernetAVB This is present on the Renesas r8a7795 SoC and may be used by the Salvator-X board. Also enable MICREL_PHY which is used on the Salvator-X board. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-02 12:31:47 +08:00
CONFIG_MICREL_PHY=y
arm64: defconfig: enable several common USB network adapters The arm64 system is likely to be used as a host computer instead of embedded devices and adding USB-Ethernet dongles to make it behave as host PC is mandatory. Changelog: v2: Changed drivers to be as modules instead of built-in. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:53 +08:00
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
arm64: defconfig: enable configs for WLAN and TI WL1835 as modules This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:54 +08:00
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_INPUT_EVDEV=y
ARM64: add GPIO keys to the defconfig The Juno board, and likely many other boards, likes to use simple GPIO keys for input events. Enabled this in the default ARM64 defconfig. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2015-06-04 19:41:41 +08:00
CONFIG_KEYBOARD_GPIO=y
arm: defconfig: Enable PM8941 pwr key This patch enables the PM8941 pwr key driver. Signed-off-by: Andy Gross <andy.gross@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2016-05-19 13:00:17 +08:00
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SERIO_SERPORT is not set
arm64: vexpress: Add CLCD support to the ARMv8 model platform This patch enables CLCD support for the VE platform emulated by the ARMv8 software model (DT bindings are based on Pawel's vexpress patches) together with defconfig entries for SERIO_AMBAKMI and FB_ARMCLCD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-10-04 21:22:23 +08:00
CONFIG_SERIO_AMBAKMI=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_LEGACY_PTY_COUNT=16
arm64: Enable APM X-Gene SOC family in the defconfig This patch enables APM X-Gene SOC family in the defconfig. It also enables 8250 serial driver needed by X-Gene SOC family. Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-04-24 17:06:58 +08:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm64: defconfig: enable ARCH_ROCKCHIP Enable building Rockchip support in the defconfig. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-17 06:34:23 +08:00
CONFIG_SERIAL_8250_DW=y
arm64: mediatek: Add MT8173 SoC Kconfig and defconfig Add MT8173 arm64 Kconfig and defconfig files Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Arnd Bergmann <arnd at arndb.de> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2015-12-01 17:14:00 +08:00
CONFIG_SERIAL_8250_MT6577=y
arm64: defconfig: enable UniPhier SoCs support Enable ARCH_UNIPHIER with its on-chip UART driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-11-24 17:08:29 +08:00
CONFIG_SERIAL_8250_UNIPHIER=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
arm64: vexpress: Enable ARMv8 RTSM model (SoC) support This patch adds the necessary Kconfig entries to enable support for the ARMv8 software model (Versatile Express platform) together with the defconfig update. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-06 00:47:44 +08:00
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
arm64: defconfig: Enable samsung serial and mmc This patch update defconfig, adds samsung serial and Synopsys Designware MMC configs related to exynos SoC Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-24 20:31:15 +08:00
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_SERIAL_TEGRA=y
arm64: defconfig: renesas: Enable Renesas r8a7795 SoC This patch enables the Renesas R-Car H3 SoC together with the SCIF driver in the arm64 defconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-02 10:56:22 +08:00
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=11
CONFIG_SERIAL_SH_SCI_CONSOLE=y
arm64: defconfig: enable basic boot for Amlogic meson Enables basic arch and serial console support for Amlogic meson family SoCs. Tested with Amlogic P200 and Hardkernel ODROID-C2 boards. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-03-24 02:49:53 +08:00
CONFIG_SERIAL_MESON=y
CONFIG_SERIAL_MESON_CONSOLE=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
ARM64: Add new Xilinx ZynqMP SoC Initial version of device tree for Xilinx ZynqMP SoC. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-03-09 16:41:04 +08:00
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_SERIAL_MVEBU_UART=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_CONSOLE=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_HW_RANDOM is not set
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_I2C_CHARDEV=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_I2C_DESIGNWARE_PLATFORM=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_I2C_IMX=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_I2C_MV64XXX=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_I2C_QUP=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_I2C_TEGRA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_I2C_UNIPHIER_F=y
arm64: defconfig: Enable Renesas R-Car I2C Controller Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-09-18 10:07:18 +08:00
CONFIG_I2C_RCAR=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_I2C_CROS_EC_TUNNEL=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SPI=y
arm64: configs: add options useful for Armada 7K/8K support This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-04-26 15:58:38 +08:00
CONFIG_SPI_ORION=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_SPI_PL022=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_SPI_QUP=y
arm64: defconfig: add CONFIG_SPI_SPIDEV as module add CONFIG_SPI_SPIDEV as module, for arm64. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:52 +08:00
CONFIG_SPI_SPIDEV=m
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_SPI_S3C64XX=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_SPMI=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_PINCTRL_SINGLE=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PINCTRL_MAX77620=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_PINCTRL_MSM8916=y
arm64: defconfig: enable msm8996 pinctrl support This patch enables pinctrl support required to boot msm8996/apq8096 boards. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-17 23:18:02 +08:00
CONFIG_PINCTRL_MSM8996=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_GPIO_SYSFS=y
arm64: defconfig: Enable DesignWare APB GPIO controller The Synopsys DesignWare APB GPIO controller is used by several vender's socs, like apm/marvell/altera/hisilicon, enable it by default. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-01-29 16:39:06 +08:00
CONFIG_GPIO_DWAPB=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_GPIO_PL061=y
arm64: defconfig: Enable GPIO of Renesas R-Car Gen3 SoC Enable GPIO for Renesas R-Car Gen3 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-29 07:09:19 +08:00
CONFIG_GPIO_RCAR=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_GPIO_XGENE=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCA953X_IRQ=y
CONFIG_GPIO_MAX77620=y
arm64: defconfig: Add Qualcomm sdhci and restart functionality Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 18:46:31 +08:00
CONFIG_POWER_RESET_MSM=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_BATTERY_BQ27XXX=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_POWER_RESET_XGENE=y
CONFIG_POWER_RESET_SYSCON=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_INA2XX=m
arm64: defconfig: enable SENSORS_ARM_SCPI ARM SCPI Sensors were merged for v4.4 and they are defined in the Juno dts. Enable it in the defconfig to get them registered automatically in Juno by default. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2016-06-13 23:15:14 +08:00
CONFIG_SENSORS_ARM_SCPI=y
arm64: defconfig: Enable exynos thermal config This patch enables Exynos thermal and related configs for the TMU found on Exynos7 SoC. This also enables thermal emulation mode to test trip points. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25 11:34:09 +08:00
CONFIG_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
arm64: defconfig: enable Renesas Watchdog Timer Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-04-01 19:56:26 +08:00
CONFIG_WATCHDOG=y
CONFIG_RENESAS_WDT=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_S3C2410_WATCHDOG=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_MFD_MAX77620=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_MFD_SPMI_PMIC=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_MFD_SEC_CORE=y
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey This patch enables a number of devices currently supported by the Hi6220 and 96boards HiKey. These include a) Hi655x PMIC and regulator b) Hi6220 I2C, USB, MMC, mailbox, and reset c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO Since b) and c) are already in the 4.6-rc3, so kept a) only in this patch and updated subject as well. v2: - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in. - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:51 +08:00
CONFIG_MFD_HI655X_PMIC=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_REGULATOR=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_REGULATOR_FIXED_VOLTAGE=y
arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey This patch enables a number of devices currently supported by the Hi6220 and 96boards HiKey. These include a) Hi655x PMIC and regulator b) Hi6220 I2C, USB, MMC, mailbox, and reset c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO Since b) and c) are already in the 4.6-rc3, so kept a) only in this patch and updated subject as well. v2: - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in. - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-02 19:47:51 +08:00
CONFIG_REGULATOR_HI655X=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_REGULATOR_MAX77620=y
CONFIG_REGULATOR_PWM=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_REGULATOR_QCOM_SMD_RPM=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_REGULATOR_QCOM_SPMI=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_REGULATOR_S2MPS11=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_DRM=m
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_TEGRA=m
CONFIG_DRM_PANEL_SIMPLE=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_FB=y
arm64: vexpress: Add CLCD support to the ARMv8 model platform This patch enables CLCD support for the VE platform emulated by the ARMv8 software model (DT bindings are based on Pawel's vexpress patches) together with defconfig entries for SERIO_AMBAKMI and FB_ARMCLCD. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com>
2012-10-04 21:22:23 +08:00
CONFIG_FB_ARMCLCD=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_LP855X=m
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
arm64: defconfig: add Renesas sound and AK4613 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25 14:39:48 +08:00
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_RCAR=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_SND_SOC_SAMSUNG=y
arm64: defconfig: add Renesas sound and AK4613 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-25 14:39:48 +08:00
CONFIG_SND_SOC_AK4613=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_USB=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_OTG=y
arm64: defconfig: enable Armada 3700 related config This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-03 01:15:24 +08:00
CONFIG_USB_XHCI_HCD=y
arm64: defconfig: Add Renesas R-Car USB 3.0 driver support Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-21 19:39:32 +08:00
CONFIG_USB_XHCI_RCAR=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_USB_EHCI_EXYNOS=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_USB_XHCI_TEGRA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_EHCI_HCD=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_EHCI_MSM=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_EHCI_HCD_PLATFORM=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_USB_OHCI_EXYNOS=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_USB_STORAGE=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_USB_DWC2=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_USB_DWC3=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_UDC=y
CONFIG_USB_CHIPIDEA_HOST=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_USB_ISP1760=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_HSIC_USB3503=y
CONFIG_USB_MSM_OTG=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_USB_ULPI=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_USB_GADGET=y
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_MMC=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_BLOCK_MINORS=32
arm64: defconfig: Expand default enabled features FPGA implementations of the Cortex-A57 and Cortex-A53 are now available in the form of the SMM-A57 and SMM-A53 Soft Macrocell Models (SMMs) for Versatile Express. As these attach to a Motherboard Express V2M-P1 it would be useful to have support for some V2M-P1 peripherals enabled by default. Additionally a couple of of features have been introduced since the last defconfig update (CMA, jump labels) that would be good to have enabled by default to ensure they are build and boot tested. This patch updates the arm64 defconfig to enable support for these devices and features. The arm64 Kconfig is modified to select HAVE_PATA_PLATFORM, which is required to enable support for the CompactFlash controller on the V2M-P1. A few options which don't need to appear in defconfig are trimmed: * BLK_DEV - selected by default * EXPERIMENTAL - otherwise gone from the kernel * MII - selected by drivers which require it * USB_SUPPORT - selected by default Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-02-08 01:12:45 +08:00
CONFIG_MMC_ARMMMCI=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_MMC_SDHCI_OF_ESDHC=y
arm64: defconfig: Enable sdhci-tegra driver This driver is used to service the SDHCI interfaces found on NVIDIA tegra SoCs. Enabling it allows SD and eMMC cards to be used for the root filesystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:41:22 +08:00
CONFIG_MMC_SDHCI_TEGRA=y
arm64: defconfig: Add Qualcomm sdhci and restart functionality Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-25 18:46:31 +08:00
CONFIG_MMC_SDHCI_MSM=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_MMC_SPI=y
arm64: defconfig: Enable samsung serial and mmc This patch update defconfig, adds samsung serial and Synopsys Designware MMC configs related to exynos SoC Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-08-24 20:31:15 +08:00
CONFIG_MMC_DW=y
CONFIG_MMC_DW_EXYNOS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MMC_DW_K3=y
CONFIG_MMC_SUNXI=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_LEDS_GPIO=y
arm64: add LEDs and some trigger support to defconfig Since many boards for ARM, experimental or server alike, will feature LEDs, let's include LED class and trigger support for heartbeat and CPU in the defconfig. Many systems (such as the ARM Juno) will use a system controller "syscon" to access the LED registers, so include support for this as well. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Liviu Dudau <Liviu.Dudau@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-02-25 20:11:55 +08:00
CONFIG_LEDS_SYSCON=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_CPU=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_CLASS=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_RTC_DRV_MAX77686=y
arm64: defconfig: Enable Samsung MFD and related configs Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-05 14:04:29 +08:00
CONFIG_RTC_DRV_S5M=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_RTC_DRV_DS3232=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_DRV_EFI=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_RTC_DRV_PL031=y
arm64: add defconfig options for Allwinner SoCs With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-23 02:20:55 +08:00
CONFIG_RTC_DRV_SUN6I=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_RTC_DRV_TEGRA=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_RTC_DRV_XGENE=y
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver The S3C RTC controller on Exynos7 platform uses RTC source clock from S2MPS11 PMIC. This patch enables the required drivers to make RTC work on Exynos7 Espresso board. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-05 18:06:51 +08:00
CONFIG_RTC_DRV_S3C=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_DMADEVICES=y
arm64: defconfig: Enable PL330 DMA controller This patch enables PL330 DMA controller found on exynos7 SoCs. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-04-12 20:50:58 +08:00
CONFIG_PL330_DMA=y
arm64: defconfig: Enable tegra-apbdma driver This driver enables the use of the DMA engine from several of the peripherals found on NVIDIA Tegra SoCs. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:42:57 +08:00
CONFIG_TEGRA20_APB_DMA=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_QCOM_BAM_DMA=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_RCAR_DMAC=y
CONFIG_VFIO=y
CONFIG_VFIO_PCI=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_VIRTIO_PCI=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_VIRTIO_BALLOON=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTIO_MMIO=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_XEN_GNTDEV=y
CONFIG_XEN_GRANT_DEV_ALLOC=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_COMMON_CLK_SCPI=y
arm64: defconfig: add CS2000 support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-12-01 13:36:57 +08:00
CONFIG_COMMON_CLK_CS2000_CP=y
arm64: defconfig: Enable S2MPS11 clock and S3C RTC driver The S3C RTC controller on Exynos7 platform uses RTC source clock from S2MPS11 PMIC. This patch enables the required drivers to make RTC work on Exynos7 Espresso board. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-07-05 18:06:51 +08:00
CONFIG_COMMON_CLK_S2MPS11=y
arm64: defconfig: enable freescale/nxp config options enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-20 23:57:40 +08:00
CONFIG_CLK_QORIQ=y
arm64: qcom: Add support for Qualcomm MSM8916 SoC Add support for Qualcomm MSM8916 SoC in arm64 Kconfig and defconfig. Enable MSM8916 clock, pin control, and MSM serial driver utilized by MSM8916 and Qualcomm SoCs in general. Signed-off-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org>
2013-10-16 12:11:09 +08:00
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8916=y
arm64: defconfig: Enable qcom msm8996 clk drivers Enable the clk drivers on msm8996. This allows us to boot and test most device drivers on this SoC. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2016-06-16 09:07:51 +08:00
CONFIG_MSM_MMCC_8996=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_HWSPINLOCK_QCOM=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_MAILBOX=y
CONFIG_ARM_MHU=y
CONFIG_HI6220_MBOX=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARM_SMMU=y
arm64: defconfig: Enable devices for MSM8916 This patch enables a number of devices currently supported by the MSM8916 boards. These include I2C, SPI, DMA, SMEM, SMD, and SMD regulator support. Signed-off-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-10-09 04:37:08 +08:00
CONFIG_QCOM_SMEM=y
CONFIG_QCOM_SMD=y
CONFIG_QCOM_SMD_RPM=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_ARCH_TEGRA_132_SOC=y
CONFIG_ARCH_TEGRA_210_SOC=y
arm64: defconfig: add spmi and usb related configs This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-06 15:07:33 +08:00
CONFIG_EXTCON_USB_GPIO=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PWM=y
CONFIG_PWM_TEGRA=m
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_COMMON_RESET_HI6220=y
arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-23 20:28:36 +08:00
CONFIG_PHY_RCAR_GEN3_USB2=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_PHY_HI6220_USB=y
arm64: defconfig: update defconfig for 3.18 This patch enables a few things missing from our defconfig: - PCI and MSI, including support for the x-gene host controller - BPF JIT - SPI, GPIO and MMC for Seattle - GPIO for x-gene - USB for Juno - RTC It also removes HMC_DRV, which was being built as a module for some reason. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-11-06 00:47:31 +08:00
CONFIG_PHY_XGENE=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_PHY_TEGRA_XUSB=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_ARM_SCPI_PROTOCOL=y
arm64: defconfig: Enable ACPI Enable ACPI by default to support testing of ACPI only systems and ensure that defconfig will boot on anything, for arm64 this is not done in Kconfig since a very large proportion of arm64 systems have no ACPI at all. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Roy Franz <roy.franz@hpe.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-15 15:53:43 +08:00
CONFIG_ACPI=y
arm64: defconfig: Enable more IP blocks for Exynos7 and Exynos5433 Enable more drivers for IP blocks for existing Exynos7 and upcoming Exynos5433: 1. SPI, 2. Watchdog, 3. USB: DWC3, Exynos EHCI and OHCI, 4. Exynos ADC, 5. Samsung PWM. These are already used by Exynos7 Espresso board or will be used by Exynos5433 based board. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
2016-07-09 04:17:03 +08:00
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
CONFIG_PWM_SAMSUNG=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_FANOTIFY=y
CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-21 19:13:12 +08:00
CONFIG_QUOTA=y
CONFIG_AUTOFS4_FS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_FUSE_FS=y
CONFIG_CUSE=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_HUGETLBFS=y
arm64: defconfig: updates for 4.6 A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-29 23:39:12 +08:00
CONFIG_CONFIGFS_FS=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_EFIVAR_FS=y
arm64: defconfig: Enable squashfs support squashfs can be a convenient way to use a root filesystem stored as a file on some other root filesystem. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:44:26 +08:00
CONFIG_SQUASHFS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NFS_FS=y
arm64: defconfig: updates for 4.1 Enable a few useful options in our defconfig: - New platform support (exynos7, seattle, tegra132) - SKY2 (ethernet in newer revisions of Juno) - Xgene reboot support - Virtio-pci for kvmtool and qemu - EFIVAR_FS (previously selected as a module) - NFSv4 Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-30 18:29:35 +08:00
CONFIG_NFS_V4=y
arm64: Update default configuration Enable a couple of drivers that are used on Jetson TX1: * GPIO_PCA953X, GPIO_PCA953X_IRQ: Two instances of this I2C GPIO expander are used on Jetson TX1 to expand the number of usable GPIOs on the I/O board. Enable the driver for this expander along with IRQ support. * MFD_MAX77620, REGULATOR_MAX77620, PINCTRL_MAX77620, GPIO_MAX77620, RTC_DRV_MAX77686: Enable support for the PMIC and various of its components found on the Jetson TX1 processor module (p2180). * RTC_DRV_TEGRA: This RTC is usually not hooked up to a battery on boards, but it can be useful as a wakeup source from suspend to RAM. * REGULATOR_PWM: The GPU is supplied by a regulator controlled via one of the Tegra's PWM channels. * DRM, DRM_NOUVEAU, DRM_TEGRA, DRM_PANEL_SIMPLE: Enable support for an optional DSI panel on Jetson TX1 as well as the GPU. * BACKLIGHT_GENERIC, BACKLIGHT_LP855X: The backlight on Jetson TX1, if shipped with a display module, is driver by an LP8557. * PHY_TEGRA_XUSB, USB_XHCI_TEGRA: Enable support for XUSB (USB 3.0) on Jetson TX1. * PWM, PWM_TEGRA: One of the PWM channels is used to control the voltage supplied to the GPU. * NFS_V4_1, NFS_V4_2: Support these newer versions of the NFS protocol to increase compatibility with distributions. * MFD_CROS_EC, MFD_CROS_EC_I2C and I2C_CROS_EC_TUNNEL: Used to enable the ChromeOS Embedded Controller and the I2C tunnel that allows the EC to function as an I2C bridge. * BATTERY_BQ27XXX: Support the battery charger and monitor found on the Google Pixel C. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-09 01:23:19 +08:00
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_ROOT_NFS=y
arm64: defconfig: add virtio support for running as a kvm guest When running as a kvm guest on a para-virtualised platform, it is useful to have virtio implementations of console, 9pfs and network. This adds these options to the arm64 defconfig, so we can easily run a defconfig kernel build as both host and as a kvm guest. Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-07-29 23:20:02 +08:00
CONFIG_9P_FS=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
arm64: defconfig: Enable printk timestamps Timestamps in the kernel log can be useful to quickly determine where time is spent during boot. There are tools that can generate charts of the boot time, but it's sometimes convenient to see this live and without the need to go through scripts to parse the logs first. Also, this option is enabled on a large number of configurations, not enabling it is confusing because the boot log looks very different from what one is used to. Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-11-16 22:45:36 +08:00
CONFIG_PRINTK_TIME=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_DEBUG_INFO=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEBUG_FS=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_MAGIC_SYSRQ=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
CONFIG_DEBUG_KERNEL=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_LOCKUP_DETECTOR=y
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_SCHED_DEBUG is not set
arm64: defconfig: defconfig update for 3.19 The usual defconfig tweaks, this time: - FHANDLE and AUTOFS4_FS to keep systemd happy - PID_NS, QUOTA and KEYS to keep LTP happy - Disable DEBUG_PREEMPT, as this *really* hurts performance Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-12-21 19:13:12 +08:00
# CONFIG_DEBUG_PREEMPT is not set
arm64: Build infrastructure This patch adds Makefile and Kconfig files required for building an AArch64 kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-04-20 21:45:54 +08:00
# CONFIG_FTRACE is not set
arm64: defconfig: enable memtest The kernel memtest utility is incredibly useful for detecting memory problems, but sadly isn't in defconfig. The memtest itself is only run when the user has explicitly passed a memtest option on the kernel command line, so simply enabling the option should not have a negative impact. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Vladimir Murzin <vladimir.murzin@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-06-15 22:02:44 +08:00
CONFIG_MEMTEST=y
arm64: defconfig update for LTP This patch adds several defconfig options required primarily by the LTP test suite. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-06-16 18:11:23 +08:00
CONFIG_SECURITY=y
arm64: defconfig: updates for 4.5 Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-01-26 02:25:59 +08:00
CONFIG_CRYPTO_ECHAINIV=y
arm64: defconfig: enable a few more common/useful options in defconfig Whilst our defconfig is certainly usable, there are a few extra features we can enable to make it considerably more useful, particularly if people are using it for testing: - KVM - SWAP - Hugepages - ARMv8 crypto This patch enables these options in our defconfig. Note that the ordering has changed slightly, since this is the result of a new savedefconfig make target. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2014-05-22 22:13:05 +08:00
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_ARM64_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM64_CE=y
CONFIG_CRYPTO_SHA2_ARM64_CE=y
CONFIG_CRYPTO_GHASH_ARM64_CE=y
CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
arm64: defconfig: disable plain NEON implementation of AES The plain NEON implementation of AES is only suited for v8 cores that lack the ARMv8 Crypto Extensions but have an implementation of the NEON tbl/tbx instruction that is not pathetically slow. Unfortunately, this is currently the empty set, so there is no point in including this implementation by default. So disable it. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-13 22:57:22 +08:00
# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set
arm64: Enable CRYPTO_CRC32_ARM64 in defconfig CONFIG_CRYPTO_CRC32_ARM64 has been around since commit f6f203faa3eb ("crypto: crc32 - Add ARM64 CRC32 hw accelerated module") but defconfig did not automatically enable it. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-07 00:50:43 +08:00
CONFIG_CRYPTO_CRC32_ARM64=y