linux/arch/powerpc/kernel/security.c

458 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// Security related flags and so on.
//
// Copyright 2018, Michael Ellerman, IBM Corporation.
#include <linux/cpu.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/seq_buf.h>
#include <asm/asm-prototypes.h>
#include <asm/code-patching.h>
#include <asm/debugfs.h>
#include <asm/security_features.h>
#include <asm/setup.h>
u64 powerpc_security_features __read_mostly = SEC_FTR_DEFAULT;
enum count_cache_flush_type {
COUNT_CACHE_FLUSH_NONE = 0x1,
COUNT_CACHE_FLUSH_SW = 0x2,
COUNT_CACHE_FLUSH_HW = 0x4,
};
static enum count_cache_flush_type count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
bool barrier_nospec_enabled;
static bool no_nospec;
static bool btb_flush_enabled;
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3S_64)
static bool no_spectrev2;
#endif
static void enable_barrier_nospec(bool enable)
{
barrier_nospec_enabled = enable;
do_barrier_nospec_fixups(enable);
}
void setup_barrier_nospec(void)
{
bool enable;
/*
* It would make sense to check SEC_FTR_SPEC_BAR_ORI31 below as well.
* But there's a good reason not to. The two flags we check below are
* both are enabled by default in the kernel, so if the hcall is not
* functional they will be enabled.
* On a system where the host firmware has been updated (so the ori
* functions as a barrier), but on which the hypervisor (KVM/Qemu) has
* not been updated, we would like to enable the barrier. Dropping the
* check for SEC_FTR_SPEC_BAR_ORI31 achieves that. The only downside is
* we potentially enable the barrier on systems where the host firmware
* is not updated, but that's harmless as it's a no-op.
*/
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR);
powerpc/speculation: Support 'mitigations=' cmdline option Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/245a606e1a42a558a310220312d9b6adb9159df6.1555085500.git.jpoimboe@redhat.com
2019-04-13 04:39:30 +08:00
if (!no_nospec && !cpu_mitigations_off())
enable_barrier_nospec(enable);
}
static int __init handle_nospectre_v1(char *p)
{
no_nospec = true;
return 0;
}
early_param("nospectre_v1", handle_nospectre_v1);
#ifdef CONFIG_DEBUG_FS
static int barrier_nospec_set(void *data, u64 val)
{
switch (val) {
case 0:
case 1:
break;
default:
return -EINVAL;
}
if (!!val == !!barrier_nospec_enabled)
return 0;
enable_barrier_nospec(!!val);
return 0;
}
static int barrier_nospec_get(void *data, u64 *val)
{
*val = barrier_nospec_enabled ? 1 : 0;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_barrier_nospec,
barrier_nospec_get, barrier_nospec_set, "%llu\n");
static __init int barrier_nospec_debugfs_init(void)
{
debugfs_create_file("barrier_nospec", 0600, powerpc_debugfs_root, NULL,
&fops_barrier_nospec);
return 0;
}
device_initcall(barrier_nospec_debugfs_init);
static __init int security_feature_debugfs_init(void)
{
debugfs_create_x64("security_features", 0400, powerpc_debugfs_root,
&powerpc_security_features);
return 0;
}
device_initcall(security_feature_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
#if defined(CONFIG_PPC_FSL_BOOK3E) || defined(CONFIG_PPC_BOOK3S_64)
static int __init handle_nospectre_v2(char *p)
{
no_spectrev2 = true;
return 0;
}
early_param("nospectre_v2", handle_nospectre_v2);
#endif /* CONFIG_PPC_FSL_BOOK3E || CONFIG_PPC_BOOK3S_64 */
#ifdef CONFIG_PPC_FSL_BOOK3E
void setup_spectre_v2(void)
{
powerpc/speculation: Support 'mitigations=' cmdline option Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/245a606e1a42a558a310220312d9b6adb9159df6.1555085500.git.jpoimboe@redhat.com
2019-04-13 04:39:30 +08:00
if (no_spectrev2 || cpu_mitigations_off())
do_btb_flush_fixups();
else
btb_flush_enabled = true;
}
#endif /* CONFIG_PPC_FSL_BOOK3E */
#ifdef CONFIG_PPC_BOOK3S_64
ssize_t cpu_show_meltdown(struct device *dev, struct device_attribute *attr, char *buf)
{
bool thread_priv;
thread_priv = security_ftr_enabled(SEC_FTR_L1D_THREAD_PRIV);
powerpc/security: Fix wrong message when RFI Flush is disable The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
2019-05-03 05:09:07 +08:00
if (rfi_flush) {
struct seq_buf s;
seq_buf_init(&s, buf, PAGE_SIZE - 1);
powerpc/security: Fix wrong message when RFI Flush is disable The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
2019-05-03 05:09:07 +08:00
seq_buf_printf(&s, "Mitigation: RFI Flush");
if (thread_priv)
powerpc/security: Fix wrong message when RFI Flush is disable The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
2019-05-03 05:09:07 +08:00
seq_buf_printf(&s, ", L1D private per thread");
seq_buf_printf(&s, "\n");
return s.len;
}
powerpc/security: Fix wrong message when RFI Flush is disable The issue was showing "Mitigation" message via sysfs whatever the state of "RFI Flush", but it should show "Vulnerable" when it is disabled. If you have "L1D private" feature enabled and not "RFI Flush" you are vulnerable to meltdown attacks. "RFI Flush" is the key feature to mitigate the meltdown whatever the "L1D private" state. SEC_FTR_L1D_THREAD_PRIV is a feature for Power9 only. So the message should be as the truth table shows: CPU | L1D private | RFI Flush | sysfs ----|-------------|-----------|------------------------------------- P9 | False | False | Vulnerable P9 | False | True | Mitigation: RFI Flush P9 | True | False | Vulnerable: L1D private per thread P9 | True | True | Mitigation: RFI Flush, L1D private per thread P8 | False | False | Vulnerable P8 | False | True | Mitigation: RFI Flush Output before this fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: L1D private per thread Output after fix: # cat /sys/devices/system/cpu/vulnerabilities/meltdown Mitigation: RFI Flush, L1D private per thread # echo 0 > /sys/kernel/debug/powerpc/rfi_flush # cat /sys/devices/system/cpu/vulnerabilities/meltdown Vulnerable: L1D private per thread Signed-off-by: Gustavo L. F. Walbon <gwalbon@linux.ibm.com> Signed-off-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190502210907.42375-1-gwalbon@linux.ibm.com
2019-05-03 05:09:07 +08:00
if (thread_priv)
return sprintf(buf, "Vulnerable: L1D private per thread\n");
if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
return sprintf(buf, "Not affected\n");
return sprintf(buf, "Vulnerable\n");
}
ssize_t cpu_show_l1tf(struct device *dev, struct device_attribute *attr, char *buf)
{
return cpu_show_meltdown(dev, attr, buf);
}
#endif
ssize_t cpu_show_spectre_v1(struct device *dev, struct device_attribute *attr, char *buf)
{
struct seq_buf s;
seq_buf_init(&s, buf, PAGE_SIZE - 1);
if (security_ftr_enabled(SEC_FTR_BNDS_CHK_SPEC_BAR)) {
if (barrier_nospec_enabled)
seq_buf_printf(&s, "Mitigation: __user pointer sanitization");
else
seq_buf_printf(&s, "Vulnerable");
if (security_ftr_enabled(SEC_FTR_SPEC_BAR_ORI31))
seq_buf_printf(&s, ", ori31 speculation barrier enabled");
seq_buf_printf(&s, "\n");
} else
seq_buf_printf(&s, "Not affected\n");
return s.len;
}
ssize_t cpu_show_spectre_v2(struct device *dev, struct device_attribute *attr, char *buf)
{
struct seq_buf s;
bool bcs, ccd;
seq_buf_init(&s, buf, PAGE_SIZE - 1);
bcs = security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED);
ccd = security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED);
if (bcs || ccd) {
seq_buf_printf(&s, "Mitigation: ");
if (bcs)
seq_buf_printf(&s, "Indirect branch serialisation (kernel only)");
if (bcs && ccd)
seq_buf_printf(&s, ", ");
if (ccd)
seq_buf_printf(&s, "Indirect branch cache disabled");
} else if (count_cache_flush_type != COUNT_CACHE_FLUSH_NONE) {
seq_buf_printf(&s, "Mitigation: Software count cache flush");
if (count_cache_flush_type == COUNT_CACHE_FLUSH_HW)
seq_buf_printf(&s, " (hardware accelerated)");
} else if (btb_flush_enabled) {
seq_buf_printf(&s, "Mitigation: Branch predictor state flush");
} else {
seq_buf_printf(&s, "Vulnerable");
}
seq_buf_printf(&s, "\n");
return s.len;
}
#ifdef CONFIG_PPC_BOOK3S_64
/*
* Store-forwarding barrier support.
*/
static enum stf_barrier_type stf_enabled_flush_types;
static bool no_stf_barrier;
bool stf_barrier;
static int __init handle_no_stf_barrier(char *p)
{
pr_info("stf-barrier: disabled on command line.");
no_stf_barrier = true;
return 0;
}
early_param("no_stf_barrier", handle_no_stf_barrier);
/* This is the generic flag used by other architectures */
static int __init handle_ssbd(char *p)
{
if (!p || strncmp(p, "auto", 5) == 0 || strncmp(p, "on", 2) == 0 ) {
/* Until firmware tells us, we have the barrier with auto */
return 0;
} else if (strncmp(p, "off", 3) == 0) {
handle_no_stf_barrier(NULL);
return 0;
} else
return 1;
return 0;
}
early_param("spec_store_bypass_disable", handle_ssbd);
/* This is the generic flag used by other architectures */
static int __init handle_no_ssbd(char *p)
{
handle_no_stf_barrier(NULL);
return 0;
}
early_param("nospec_store_bypass_disable", handle_no_ssbd);
static void stf_barrier_enable(bool enable)
{
if (enable)
do_stf_barrier_fixups(stf_enabled_flush_types);
else
do_stf_barrier_fixups(STF_BARRIER_NONE);
stf_barrier = enable;
}
void setup_stf_barrier(void)
{
enum stf_barrier_type type;
bool enable, hv;
hv = cpu_has_feature(CPU_FTR_HVMODE);
/* Default to fallback in case fw-features are not available */
if (cpu_has_feature(CPU_FTR_ARCH_300))
type = STF_BARRIER_EIEIO;
else if (cpu_has_feature(CPU_FTR_ARCH_207S))
type = STF_BARRIER_SYNC_ORI;
else if (cpu_has_feature(CPU_FTR_ARCH_206))
type = STF_BARRIER_FALLBACK;
else
type = STF_BARRIER_NONE;
enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) &&
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR) ||
(security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) && hv));
if (type == STF_BARRIER_FALLBACK) {
pr_info("stf-barrier: fallback barrier available\n");
} else if (type == STF_BARRIER_SYNC_ORI) {
pr_info("stf-barrier: hwsync barrier available\n");
} else if (type == STF_BARRIER_EIEIO) {
pr_info("stf-barrier: eieio barrier available\n");
}
stf_enabled_flush_types = type;
powerpc/speculation: Support 'mitigations=' cmdline option Configure powerpc CPU runtime speculation bug mitigations in accordance with the 'mitigations=' cmdline option. This affects Meltdown, Spectre v1, Spectre v2, and Speculative Store Bypass. The default behavior is unchanged. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jiri Kosina <jkosina@suse.cz> (on x86) Reviewed-by: Jiri Kosina <jkosina@suse.cz> Cc: Borislav Petkov <bp@alien8.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Waiman Long <longman@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jon Masters <jcm@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: linuxppc-dev@lists.ozlabs.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arch@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Tyler Hicks <tyhicks@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Steven Price <steven.price@arm.com> Cc: Phil Auld <pauld@redhat.com> Link: https://lkml.kernel.org/r/245a606e1a42a558a310220312d9b6adb9159df6.1555085500.git.jpoimboe@redhat.com
2019-04-13 04:39:30 +08:00
if (!no_stf_barrier && !cpu_mitigations_off())
stf_barrier_enable(enable);
}
ssize_t cpu_show_spec_store_bypass(struct device *dev, struct device_attribute *attr, char *buf)
{
if (stf_barrier && stf_enabled_flush_types != STF_BARRIER_NONE) {
const char *type;
switch (stf_enabled_flush_types) {
case STF_BARRIER_EIEIO:
type = "eieio";
break;
case STF_BARRIER_SYNC_ORI:
type = "hwsync";
break;
case STF_BARRIER_FALLBACK:
type = "fallback";
break;
default:
type = "unknown";
}
return sprintf(buf, "Mitigation: Kernel entry/exit barrier (%s)\n", type);
}
if (!security_ftr_enabled(SEC_FTR_L1D_FLUSH_HV) &&
!security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR))
return sprintf(buf, "Not affected\n");
return sprintf(buf, "Vulnerable\n");
}
#ifdef CONFIG_DEBUG_FS
static int stf_barrier_set(void *data, u64 val)
{
bool enable;
if (val == 1)
enable = true;
else if (val == 0)
enable = false;
else
return -EINVAL;
/* Only do anything if we're changing state */
if (enable != stf_barrier)
stf_barrier_enable(enable);
return 0;
}
static int stf_barrier_get(void *data, u64 *val)
{
*val = stf_barrier ? 1 : 0;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_stf_barrier, stf_barrier_get, stf_barrier_set, "%llu\n");
static __init int stf_barrier_debugfs_init(void)
{
debugfs_create_file("stf_barrier", 0600, powerpc_debugfs_root, NULL, &fops_stf_barrier);
return 0;
}
device_initcall(stf_barrier_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
static void toggle_count_cache_flush(bool enable)
{
if (!enable || !security_ftr_enabled(SEC_FTR_FLUSH_COUNT_CACHE)) {
patch_instruction_site(&patch__call_flush_count_cache, PPC_INST_NOP);
count_cache_flush_type = COUNT_CACHE_FLUSH_NONE;
pr_info("count-cache-flush: software flush disabled.\n");
return;
}
patch_branch_site(&patch__call_flush_count_cache,
(u64)&flush_count_cache, BRANCH_SET_LINK);
if (!security_ftr_enabled(SEC_FTR_BCCTR_FLUSH_ASSIST)) {
count_cache_flush_type = COUNT_CACHE_FLUSH_SW;
pr_info("count-cache-flush: full software flush sequence enabled.\n");
return;
}
patch_instruction_site(&patch__flush_count_cache_return, PPC_INST_BLR);
count_cache_flush_type = COUNT_CACHE_FLUSH_HW;
pr_info("count-cache-flush: hardware assisted flush sequence enabled\n");
}
void setup_count_cache_flush(void)
{
bool enable = true;
if (no_spectrev2 || cpu_mitigations_off()) {
if (security_ftr_enabled(SEC_FTR_BCCTRL_SERIALISED) ||
security_ftr_enabled(SEC_FTR_COUNT_CACHE_DISABLED))
pr_warn("Spectre v2 mitigations not under software control, can't disable\n");
enable = false;
}
toggle_count_cache_flush(enable);
}
#ifdef CONFIG_DEBUG_FS
static int count_cache_flush_set(void *data, u64 val)
{
bool enable;
if (val == 1)
enable = true;
else if (val == 0)
enable = false;
else
return -EINVAL;
toggle_count_cache_flush(enable);
return 0;
}
static int count_cache_flush_get(void *data, u64 *val)
{
if (count_cache_flush_type == COUNT_CACHE_FLUSH_NONE)
*val = 0;
else
*val = 1;
return 0;
}
DEFINE_SIMPLE_ATTRIBUTE(fops_count_cache_flush, count_cache_flush_get,
count_cache_flush_set, "%llu\n");
static __init int count_cache_flush_debugfs_init(void)
{
debugfs_create_file("count_cache_flush", 0600, powerpc_debugfs_root,
NULL, &fops_count_cache_flush);
return 0;
}
device_initcall(count_cache_flush_debugfs_init);
#endif /* CONFIG_DEBUG_FS */
#endif /* CONFIG_PPC_BOOK3S_64 */