linux/drivers/media/dvb-frontends/cxd2820r_core.c

838 lines
20 KiB
C
Raw Normal View History

/*
* Sony CXD2820R demodulator driver
*
* Copyright (C) 2010 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include "cxd2820r_priv.h"
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
/* write multiple registers */
static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
u8 *val, int len)
{
struct i2c_client *client = priv->client[0];
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = i2c,
.flags = 0,
.len = len + 1,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
if (1 + len > sizeof(buf)) {
dev_warn(&client->dev, "i2c wr reg=%04x: len=%d is too big!\n",
reg, len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
return -EINVAL;
}
buf[0] = reg;
memcpy(&buf[1], val, len);
ret = i2c_transfer(priv->client[0]->adapter, msg, 1);
if (ret == 1) {
ret = 0;
} else {
dev_warn(&client->dev, "i2c wr failed=%d reg=%02x len=%d\n",
ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* read multiple registers */
static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg,
u8 *val, int len)
{
struct i2c_client *client = priv->client[0];
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[2] = {
{
.addr = i2c,
.flags = 0,
.len = 1,
.buf = &reg,
}, {
.addr = i2c,
.flags = I2C_M_RD,
.len = len,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
if (len > sizeof(buf)) {
dev_warn(&client->dev, "i2c wr reg=%04x: len=%d is too big!\n",
reg, len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 16:11:47 +08:00
return -EINVAL;
}
ret = i2c_transfer(priv->client[0]->adapter, msg, 2);
if (ret == 2) {
memcpy(val, buf, len);
ret = 0;
} else {
dev_warn(&client->dev, "i2c rd failed=%d reg=%02x len=%d\n",
ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* write multiple registers */
int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
int len)
{
int ret;
u8 i2c_addr;
u8 reg = (reginfo >> 0) & 0xff;
u8 bank = (reginfo >> 8) & 0xff;
u8 i2c = (reginfo >> 16) & 0x01;
/* select I2C */
if (i2c)
i2c_addr = priv->client[1]->addr; /* DVB-C */
else
i2c_addr = priv->client[0]->addr; /* DVB-T/T2 */
/* switch bank if needed */
if (bank != priv->bank[i2c]) {
ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1);
if (ret)
return ret;
priv->bank[i2c] = bank;
}
return cxd2820r_wr_regs_i2c(priv, i2c_addr, reg, val, len);
}
/* read multiple registers */
int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val,
int len)
{
int ret;
u8 i2c_addr;
u8 reg = (reginfo >> 0) & 0xff;
u8 bank = (reginfo >> 8) & 0xff;
u8 i2c = (reginfo >> 16) & 0x01;
/* select I2C */
if (i2c)
i2c_addr = priv->client[1]->addr; /* DVB-C */
else
i2c_addr = priv->client[0]->addr; /* DVB-T/T2 */
/* switch bank if needed */
if (bank != priv->bank[i2c]) {
ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1);
if (ret)
return ret;
priv->bank[i2c] = bank;
}
return cxd2820r_rd_regs_i2c(priv, i2c_addr, reg, val, len);
}
/* write single register */
int cxd2820r_wr_reg(struct cxd2820r_priv *priv, u32 reg, u8 val)
{
return cxd2820r_wr_regs(priv, reg, &val, 1);
}
/* read single register */
int cxd2820r_rd_reg(struct cxd2820r_priv *priv, u32 reg, u8 *val)
{
return cxd2820r_rd_regs(priv, reg, val, 1);
}
/* write single register with mask */
int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val,
u8 mask)
{
int ret;
u8 tmp;
/* no need for read if whole reg is written */
if (mask != 0xff) {
ret = cxd2820r_rd_reg(priv, reg, &tmp);
if (ret)
return ret;
val &= mask;
tmp &= ~mask;
val |= tmp;
}
return cxd2820r_wr_reg(priv, reg, val);
}
int cxd2820r_gpio(struct dvb_frontend *fe, u8 *gpio)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i;
u8 tmp0, tmp1;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
/* update GPIOs only when needed */
if (!memcmp(gpio, priv->gpio, sizeof(priv->gpio)))
return 0;
tmp0 = 0x00;
tmp1 = 0x00;
for (i = 0; i < sizeof(priv->gpio); i++) {
/* enable / disable */
if (gpio[i] & CXD2820R_GPIO_E)
tmp0 |= (2 << 6) >> (2 * i);
else
tmp0 |= (1 << 6) >> (2 * i);
/* input / output */
if (gpio[i] & CXD2820R_GPIO_I)
tmp1 |= (1 << (3 + i));
else
tmp1 |= (0 << (3 + i));
/* high / low */
if (gpio[i] & CXD2820R_GPIO_H)
tmp1 |= (1 << (0 + i));
else
tmp1 |= (0 << (0 + i));
dev_dbg(&client->dev, "gpio i=%d %02x %02x\n", i, tmp0, tmp1);
}
dev_dbg(&client->dev, "wr gpio=%02x %02x\n", tmp0, tmp1);
/* write bits [7:2] */
ret = cxd2820r_wr_reg_mask(priv, 0x00089, tmp0, 0xfc);
if (ret)
goto error;
/* write bits [5:0] */
ret = cxd2820r_wr_reg_mask(priv, 0x0008e, tmp1, 0x3f);
if (ret)
goto error;
memcpy(priv->gpio, gpio, sizeof(priv->gpio));
return ret;
error:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int cxd2820r_set_frontend(struct dvb_frontend *fe)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
switch (c->delivery_system) {
case SYS_DVBT:
ret = cxd2820r_init_t(fe);
if (ret < 0)
goto err;
ret = cxd2820r_set_frontend_t(fe);
if (ret < 0)
goto err;
break;
case SYS_DVBT2:
ret = cxd2820r_init_t(fe);
if (ret < 0)
goto err;
ret = cxd2820r_set_frontend_t2(fe);
if (ret < 0)
goto err;
break;
case SYS_DVBC_ANNEX_A:
ret = cxd2820r_init_c(fe);
if (ret < 0)
goto err;
ret = cxd2820r_set_frontend_c(fe);
if (ret < 0)
goto err;
break;
default:
dev_dbg(&client->dev, "invalid delivery_system\n");
ret = -EINVAL;
break;
}
err:
return ret;
}
static int cxd2820r_read_status(struct dvb_frontend *fe, enum fe_status *status)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
switch (c->delivery_system) {
case SYS_DVBT:
ret = cxd2820r_read_status_t(fe, status);
break;
case SYS_DVBT2:
ret = cxd2820r_read_status_t2(fe, status);
break;
case SYS_DVBC_ANNEX_A:
ret = cxd2820r_read_status_c(fe, status);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int cxd2820r_get_frontend(struct dvb_frontend *fe,
struct dtv_frontend_properties *p)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
if (priv->delivery_system == SYS_UNDEFINED)
return 0;
switch (c->delivery_system) {
case SYS_DVBT:
ret = cxd2820r_get_frontend_t(fe, p);
break;
case SYS_DVBT2:
ret = cxd2820r_get_frontend_t2(fe, p);
break;
case SYS_DVBC_ANNEX_A:
ret = cxd2820r_get_frontend_c(fe, p);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int cxd2820r_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
*ber = (priv->post_bit_error - priv->post_bit_error_prev_dvbv3);
priv->post_bit_error_prev_dvbv3 = priv->post_bit_error;
return 0;
}
static int cxd2820r_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
if (c->strength.stat[0].scale == FE_SCALE_RELATIVE)
*strength = c->strength.stat[0].uvalue;
else
*strength = 0;
return 0;
}
static int cxd2820r_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
*snr = div_s64(c->cnr.stat[0].svalue, 100);
else
*snr = 0;
return 0;
}
static int cxd2820r_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
*ucblocks = 0;
return 0;
}
static int cxd2820r_init(struct dvb_frontend *fe)
{
return 0;
}
static int cxd2820r_sleep(struct dvb_frontend *fe)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
switch (c->delivery_system) {
case SYS_DVBT:
ret = cxd2820r_sleep_t(fe);
break;
case SYS_DVBT2:
ret = cxd2820r_sleep_t2(fe);
break;
case SYS_DVBC_ANNEX_A:
ret = cxd2820r_sleep_c(fe);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int cxd2820r_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
switch (c->delivery_system) {
case SYS_DVBT:
ret = cxd2820r_get_tune_settings_t(fe, s);
break;
case SYS_DVBT2:
ret = cxd2820r_get_tune_settings_t2(fe, s);
break;
case SYS_DVBC_ANNEX_A:
ret = cxd2820r_get_tune_settings_c(fe, s);
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i;
enum fe_status status = 0;
dev_dbg(&client->dev, "delivery_system=%d\n", c->delivery_system);
/* switch between DVB-T and DVB-T2 when tune fails */
if (priv->last_tune_failed) {
if (priv->delivery_system == SYS_DVBT) {
ret = cxd2820r_sleep_t(fe);
if (ret)
goto error;
c->delivery_system = SYS_DVBT2;
} else if (priv->delivery_system == SYS_DVBT2) {
ret = cxd2820r_sleep_t2(fe);
if (ret)
goto error;
c->delivery_system = SYS_DVBT;
}
}
/* set frontend */
ret = cxd2820r_set_frontend(fe);
if (ret)
goto error;
/* frontend lock wait loop count */
switch (priv->delivery_system) {
case SYS_DVBT:
case SYS_DVBC_ANNEX_A:
i = 20;
break;
case SYS_DVBT2:
i = 40;
break;
case SYS_UNDEFINED:
default:
i = 0;
break;
}
/* wait frontend lock */
for (; i > 0; i--) {
dev_dbg(&client->dev, "loop=%d\n", i);
msleep(50);
ret = cxd2820r_read_status(fe, &status);
if (ret)
goto error;
if (status & FE_HAS_LOCK)
break;
}
/* check if we have a valid signal */
if (status & FE_HAS_LOCK) {
priv->last_tune_failed = false;
return DVBFE_ALGO_SEARCH_SUCCESS;
} else {
priv->last_tune_failed = true;
return DVBFE_ALGO_SEARCH_AGAIN;
}
error:
dev_dbg(&client->dev, "failed=%d\n", ret);
return DVBFE_ALGO_SEARCH_ERROR;
}
static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe)
{
return DVBFE_ALGO_CUSTOM;
}
static void cxd2820r_release(struct dvb_frontend *fe)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
dev_dbg(&client->dev, "\n");
i2c_unregister_device(client);
return;
}
static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct cxd2820r_priv *priv = fe->demodulator_priv;
struct i2c_client *client = priv->client[0];
dev_dbg_ratelimited(&client->dev, "enable=%d\n", enable);
/* Bit 0 of reg 0xdb in bank 0x00 controls I2C repeater */
return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1);
}
#ifdef CONFIG_GPIOLIB
static int cxd2820r_gpio_direction_output(struct gpio_chip *chip, unsigned nr,
int val)
{
struct cxd2820r_priv *priv = gpiochip_get_data(chip);
struct i2c_client *client = priv->client[0];
u8 gpio[GPIO_COUNT];
dev_dbg(&client->dev, "nr=%u val=%d\n", nr, val);
memcpy(gpio, priv->gpio, sizeof(gpio));
gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2);
return cxd2820r_gpio(&priv->fe, gpio);
}
static void cxd2820r_gpio_set(struct gpio_chip *chip, unsigned nr, int val)
{
struct cxd2820r_priv *priv = gpiochip_get_data(chip);
struct i2c_client *client = priv->client[0];
u8 gpio[GPIO_COUNT];
dev_dbg(&client->dev, "nr=%u val=%d\n", nr, val);
memcpy(gpio, priv->gpio, sizeof(gpio));
gpio[nr] = CXD2820R_GPIO_E | CXD2820R_GPIO_O | (val << 2);
(void) cxd2820r_gpio(&priv->fe, gpio);
return;
}
static int cxd2820r_gpio_get(struct gpio_chip *chip, unsigned nr)
{
struct cxd2820r_priv *priv = gpiochip_get_data(chip);
struct i2c_client *client = priv->client[0];
dev_dbg(&client->dev, "nr=%u\n", nr);
return (priv->gpio[nr] >> 2) & 0x01;
}
#endif
static const struct dvb_frontend_ops cxd2820r_ops = {
.delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A },
/* default: DVB-T/T2 */
.info = {
.name = "Sony CXD2820R",
.caps = FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK |
FE_CAN_QAM_16 |
FE_CAN_QAM_32 |
FE_CAN_QAM_64 |
FE_CAN_QAM_128 |
FE_CAN_QAM_256 |
FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO |
FE_CAN_MUTE_TS |
FE_CAN_2G_MODULATION |
FE_CAN_MULTISTREAM
},
.release = cxd2820r_release,
.init = cxd2820r_init,
.sleep = cxd2820r_sleep,
.get_tune_settings = cxd2820r_get_tune_settings,
.i2c_gate_ctrl = cxd2820r_i2c_gate_ctrl,
.get_frontend = cxd2820r_get_frontend,
.get_frontend_algo = cxd2820r_get_frontend_algo,
.search = cxd2820r_search,
.read_status = cxd2820r_read_status,
.read_snr = cxd2820r_read_snr,
.read_ber = cxd2820r_read_ber,
.read_ucblocks = cxd2820r_read_ucblocks,
.read_signal_strength = cxd2820r_read_signal_strength,
};
/*
* XXX: That is wrapper to cxd2820r_probe() via driver core in order to provide
* proper I2C client for legacy media attach binding.
* New users must use I2C client binding directly!
*/
struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *config,
struct i2c_adapter *adapter,
int *gpio_chip_base)
{
struct i2c_client *client;
struct i2c_board_info board_info;
struct cxd2820r_platform_data pdata;
pdata.ts_mode = config->ts_mode;
pdata.ts_clk_inv = config->ts_clock_inv;
pdata.if_agc_polarity = config->if_agc_polarity;
pdata.spec_inv = config->spec_inv;
pdata.gpio_chip_base = &gpio_chip_base;
pdata.attach_in_use = true;
memset(&board_info, 0, sizeof(board_info));
strlcpy(board_info.type, "cxd2820r", I2C_NAME_SIZE);
board_info.addr = config->i2c_address;
board_info.platform_data = &pdata;
client = i2c_new_device(adapter, &board_info);
if (!client || !client->dev.driver)
return NULL;
return pdata.get_dvb_frontend(client);
}
EXPORT_SYMBOL(cxd2820r_attach);
static struct dvb_frontend *cxd2820r_get_dvb_frontend(struct i2c_client *client)
{
struct cxd2820r_priv *priv = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
return &priv->fe;
}
static int cxd2820r_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct cxd2820r_platform_data *pdata = client->dev.platform_data;
struct cxd2820r_priv *priv;
int ret, *gpio_chip_base;
u8 u8tmp;
dev_dbg(&client->dev, "\n");
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto err;
}
priv->client[0] = client;
priv->i2c = client->adapter;
priv->ts_mode = pdata->ts_mode;
priv->ts_clk_inv = pdata->ts_clk_inv;
priv->if_agc_polarity = pdata->if_agc_polarity;
priv->spec_inv = pdata->spec_inv;
priv->bank[0] = 0xff;
priv->bank[1] = 0xff;
gpio_chip_base = *pdata->gpio_chip_base;
/* Check demod answers with correct chip id */
ret = cxd2820r_rd_reg(priv, 0x000fd, &u8tmp);
if (ret)
goto err_kfree;
dev_dbg(&client->dev, "chip_id=%02x\n", u8tmp);
if (u8tmp != 0xe1) {
ret = -ENODEV;
goto err_kfree;
}
/*
* Chip has two I2C addresses for different register banks. We register
* one dummy I2C client in in order to get own I2C client for each
* register bank.
*/
priv->client[1] = i2c_new_dummy(client->adapter, client->addr | (1 << 1));
if (!priv->client[1]) {
ret = -ENODEV;
dev_err(&client->dev, "I2C registration failed\n");
if (ret)
goto err_kfree;
}
if (gpio_chip_base) {
#ifdef CONFIG_GPIOLIB
/* Add GPIOs */
priv->gpio_chip.label = KBUILD_MODNAME;
priv->gpio_chip.parent = &client->dev;
priv->gpio_chip.owner = THIS_MODULE;
priv->gpio_chip.direction_output = cxd2820r_gpio_direction_output;
priv->gpio_chip.set = cxd2820r_gpio_set;
priv->gpio_chip.get = cxd2820r_gpio_get;
priv->gpio_chip.base = -1; /* Dynamic allocation */
priv->gpio_chip.ngpio = GPIO_COUNT;
priv->gpio_chip.can_sleep = 1;
ret = gpiochip_add_data(&priv->gpio_chip, priv);
if (ret)
goto err_client_1_i2c_unregister_device;
dev_dbg(&client->dev, "gpio_chip.base=%d\n",
priv->gpio_chip.base);
*gpio_chip_base = priv->gpio_chip.base;
#else
/*
* Use static GPIO configuration if GPIOLIB is undefined.
* This is fallback condition.
*/
u8 gpio[GPIO_COUNT];
gpio[0] = (*gpio_chip_base >> 0) & 0x07;
gpio[1] = (*gpio_chip_base >> 3) & 0x07;
gpio[2] = 0;
ret = cxd2820r_gpio(&priv->fe, gpio);
if (ret)
goto err_client_1_i2c_unregister_device;
#endif
}
/* Create dvb frontend */
memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof(priv->fe.ops));
if (!pdata->attach_in_use)
priv->fe.ops.release = NULL;
priv->fe.demodulator_priv = priv;
i2c_set_clientdata(client, priv);
/* Setup callbacks */
pdata->get_dvb_frontend = cxd2820r_get_dvb_frontend;
dev_info(&client->dev, "Sony CXD2820R successfully identified\n");
return 0;
err_client_1_i2c_unregister_device:
i2c_unregister_device(priv->client[1]);
err_kfree:
kfree(priv);
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int cxd2820r_remove(struct i2c_client *client)
{
struct cxd2820r_priv *priv = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
#ifdef CONFIG_GPIOLIB
if (priv->gpio_chip.label)
gpiochip_remove(&priv->gpio_chip);
#endif
i2c_unregister_device(priv->client[1]);
kfree(priv);
return 0;
}
static const struct i2c_device_id cxd2820r_id_table[] = {
{"cxd2820r", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, cxd2820r_id_table);
static struct i2c_driver cxd2820r_driver = {
.driver = {
.name = "cxd2820r",
.suppress_bind_attrs = true,
},
.probe = cxd2820r_probe,
.remove = cxd2820r_remove,
.id_table = cxd2820r_id_table,
};
module_i2c_driver(cxd2820r_driver);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Sony CXD2820R demodulator driver");
MODULE_LICENSE("GPL");