linux/drivers/clocksource/Makefile

54 lines
2.4 KiB
Makefile
Raw Normal View History

obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
obj-$(CONFIG_ATMEL_PIT) += timer-atmel-pit.o
obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o
obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o
obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o
obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o
obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o
obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o
obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
obj-$(CONFIG_EM_TIMER_STI) += em_sti.o
obj-$(CONFIG_CLKBLD_I8253) += i8253.o
obj-$(CONFIG_CLKSRC_MMIO) += mmio.o
obj-$(CONFIG_DIGICOLOR_TIMER) += timer-digicolor.o
obj-$(CONFIG_DW_APB_TIMER) += dw_apb_timer.o
obj-$(CONFIG_DW_APB_TIMER_OF) += dw_apb_timer_of.o
obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
obj-$(CONFIG_CLKSRC_NOMADIK_MTU) += nomadik-mtu.o
obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o
obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o
obj-$(CONFIG_ORION_TIMER) += time-orion.o
ARM: bcm2835: add system timer The System Timer peripheral provides four 32-bit timer channels and a single 64-bit free running counter. Each channel has an output compare register, which is compared against the 32 least significant bits of the free running counter values, and generates an interrupt. Timer 3 is used as the Linux timer. The BCM2835 also contains an SP804-based timer module. However, it apparently has significant differences from the standard SP804 IP block, and Broadcom's documentation recommends using the system timer instead. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split as of 2012/09/08, and modified as follows: * s/bcm2708/bcm2835/. * Modified device tree vendor prefix. * Moved to drivers/clocksource/. This looks like the desired location for such code now. * Added DT binding docs. * Moved struct sys_timer bcm2835_timer into time.c to encapsulate it more. * Simplified bcm2835_time_init() to find one matching node and operate on it, rather than looping over all matching nodes. This seems more consistent with other clocksource code. * Simplified bcm2835_time_init() using of_iomap(). * Renamed struct bcm2835_timer.index to match_mask to better represent its purpose. * s/printk(PR_INFO/pr_info(/ Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-11 12:38:35 +08:00
obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o
obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o
obj-$(CONFIG_ARCH_ATLAS7) += timer-atlas7.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
obj-$(CONFIG_CLKSRC_PXA) += pxa_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_ARCH_U300) += timer-u300.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
obj-$(CONFIG_SUN5I_HSTIMER) += timer-sun5i.o
obj-$(CONFIG_MESON6_TIMER) += meson6_timer.o
obj-$(CONFIG_TEGRA_TIMER) += tegra20_timer.o
obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
obj-$(CONFIG_ARCH_BCM_MOBILE) += bcm_kona_timer.o
add support exynos mct device tree and move into drivers/clocksource -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJRYugaAAoJEA0Cl+kVi2xqvi0QAKyF/UbDR6aOSIOoCzgm1iUC +F9WvvCLyJdy0y09IKEbwM+aZyzsfC7vO/9wp58ROv1AhD9f1/yk1H+O8NRS668v jt8RZlrL30ea0HkRjHRgTCS2sObCXG2pGOduX9i5XKCC4EnM9P/qNe4uJjziY8K8 FmAanWpJahe0E9szLnWDuF7hhsRkTpjrLWtYYmc1H4LXydoZnxEgGM3xjbqL+m4/ BPwlCrPtu/WsZzM7Tdx6fVIC2wryrwoH5e1EL3fI2IrWhreOtVWYzoTwUoSy7Xbz ERjQoCt3yNVmPO1TwfS9nR/bc0+j8gsFuJRzN42PsP09JFQPVt8Q1o1cpIIHWgvZ /pkJAsaBfbQgPOLNof5uHasPVSZYe38TIey782hYA0pmT1RCt46FuJ6zM9M0483q 4vysYCU/Vc3GOtAQOpsCNbsEMthRzjtjsJoZ5owDsCaiV+eNWC3VrWI2Wm1EO7Mn FUthkBY58jPM/9BdFC67ZwBPtSSUhAeZpcUXkcaNj8pgw8Rvfcip/09Vy0Uh0Ef8 A5dYZec8CNyZKECspzUTlgwyK7xiWD0r3uyr4/a413qb1pr9zdOFlZeespT9bgfI uD+tMPpJ+R9fK9BSbRw9FMx1Pe395vZRUmu9WepvQDwQDvoYSi/SVKBMYtn27Bsm CD/r/wUs1ktL2rPNcXVz =Os9U -----END PGP SIGNATURE----- Merge tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim <kgene.kim@samsung.com>: add support exynos mct device tree and move into drivers/clocksource * tag 'mct-exynos-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: clocksource: mct: Add terminating entry for exynos_mct_ids table clocksource: mct: Add missing semicolons in exynos_mct.c ARM: EXYNOS: move mct driver to drivers/clocksource ARM: EXYNOS: remove static io-remapping of mct registers for Exynos5 ARM: dts: add mct device tree node for all supported Exynos SoC's ARM: EXYNOS: allow dt based discovery of mct controller using clocksource_of_init ARM: EXYNOS: add device tree support for MCT controller driver ARM: EXYNOS: prepare an array of MCT interrupt numbers and use it ARM: EXYNOS: add a register base address variable in mct controller driver Conflicts: drivers/clocksource/Makefile drivers/clocksource/exynos_mct.c [arnd: adapt to CLOCKSOURCE_OF_DECLARE interface change] Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10 04:07:37 +08:00
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_FSL_FTM_TIMER) += fsl_ftm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
ARM: soc: soc-specific updates Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO2SAAoJEIwa5zzehBx3TBIQAJYc+vpAqiv8MLQ1XV3cLiIP X57fxM9u1A+uXpXsiCTGR+ga8W4a5tlfGMXDBnl/K2bnFs2x11b9NkFLDJ7mdkih J4c/iOWT/mT5suLnnybyg6ZGaxGkAKou2AumiSmkazmq5hGG67hkpAOqFEfDK0J2 Au7/6VN6GZXgiwt8nYaAB/qR5NVcww4m/6GQ2looaWgRLT/wgC3W2ZKvw6zEdl2J OxOpwf2ujG/75zLQaxTeZ5rKnGtAXH4v0KhY9CWQacQPi4L2MVCrvUrDB4j0as4H Wmsu7g6fZA9Vlf1aW/mlDY1ftozfbDaKORoYVS+CsWhm1oiQI5t+sAWRTkbbS85t pobgKfFdvNsl9kS1zRdEddK2tyotwtXh2jz+P/s1l95hfqZ8IdVBJNMlcrHRINOI 2iQXFfGRhCCqMcfFiGXJ43tYja/aCsaIc4M5TrEma57czZT5jK8HSLh0ZUmFYDoe /TfUegVhFASmkNTk7dVZgZ2UoQVkv4lWs+xuf8YgX3UalWgl/YIRRFl4NnylGlEc jjrX3MjXATqXzLPEZaf8dRZHIpB6FYmZq1QqaoefcUQ46gBOueThElZP3sNWR8a2 MOtknauLfLwQbrcH5CmqKpIpXTB4LKgbf/omH2jQlxBhQ5t7PXHVD1NFsbZbwM8J RVCZb4PwqEwOt/wibTrk =BCp4 -----END PGP SIGNATURE----- Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc-specific updates from Olof Johansson: "Most notable here is probably the addition of basic support for the BCM2835, an SoC used in some of the Roku 2 players as well as the much-hyped Raspberry Pi, cleaned up and contributed by Stephen Warren. It's still early days on mainline support, with just the basics working. But it has to start somewhere! Beyond that there's some conversions of clock infrastructure on tegra to common clock, misc updates for several other platforms, and OMAP now has its own bus (under drivers/bus) to manage its devices through. This branch adds two new directories outside of arch/arm: drivers/irqchip for new irq controllers, and drivers/bus for the above OMAP bus. It's expected that some of the other platforms will migrate parts of their platforms to those directories over time as well." Fix up trivial conflicts with the clk infrastructure changes. * tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (62 commits) ARM: shmobile: add new __iomem annotation for new code ARM: LPC32xx: Support GPI 28 ARM: LPC32xx: Platform update for devicetree completion of spi-pl022 ARM: LPC32xx: Board cleanup irqchip: fill in empty Kconfig ARM: SAMSUNG: Add check for NULL in clock interface ARM: EXYNOS: Put PCM, Slimbus, Spdif clocks to off state ARM: EXYNOS: Add bus clock for FIMD ARM: SAMSUNG: Fix HDMI related warnings ARM: S3C24XX: Add .get_rate callback for "camif-upll" clock ARM: EXYNOS: Fix incorrect help text ARM: EXYNOS: Turn off clocks for NAND, OneNAND and TSI controllers ARM: OMAP: AM33xx hwmod: fixup SPI after platform_data move MAINTAINERS: add an entry for the BCM2835 ARM sub-architecture ARM: bcm2835: instantiate console UART ARM: bcm2835: add stub clock driver ARM: bcm2835: add system timer ARM: bcm2835: add interrupt controller driver ARM: add infra-structure for BCM2835 and Raspberry Pi ARM: tegra20: add CPU hotplug support ...
2012-10-02 09:24:44 +08:00
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
obj-$(CONFIG_CLKSRC_MIPS_GIC) += mips-gic-timer.o
obj-$(CONFIG_ASM9260_TIMER) += asm9260_timer.o