linux/drivers/input/misc/sirfsoc-onkey.c

208 lines
5.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Power key driver for SiRF PrimaII
*
* Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group
* company.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/rtc/sirfsoc_rtciobrg.h>
#include <linux/of.h>
#include <linux/workqueue.h>
struct sirfsoc_pwrc_drvdata {
u32 pwrc_base;
struct input_dev *input;
struct delayed_work work;
};
#define PWRC_ON_KEY_BIT (1 << 0)
#define PWRC_INT_STATUS 0xc
#define PWRC_INT_MASK 0x10
#define PWRC_PIN_STATUS 0x14
#define PWRC_KEY_DETECT_UP_TIME 20 /* ms*/
static int sirfsoc_pwrc_is_on_key_down(struct sirfsoc_pwrc_drvdata *pwrcdrv)
{
u32 state = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
PWRC_PIN_STATUS);
return !(state & PWRC_ON_KEY_BIT); /* ON_KEY is active low */
}
static void sirfsoc_pwrc_report_event(struct work_struct *work)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv =
container_of(work, struct sirfsoc_pwrc_drvdata, work.work);
if (sirfsoc_pwrc_is_on_key_down(pwrcdrv)) {
schedule_delayed_work(&pwrcdrv->work,
msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
} else {
input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 0);
input_sync(pwrcdrv->input);
}
}
static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
u32 int_status;
int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
PWRC_INT_STATUS);
sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
pwrcdrv->pwrc_base + PWRC_INT_STATUS);
input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 1);
input_sync(pwrcdrv->input);
schedule_delayed_work(&pwrcdrv->work,
msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
return IRQ_HANDLED;
}
static void sirfsoc_pwrc_toggle_interrupts(struct sirfsoc_pwrc_drvdata *pwrcdrv,
bool enable)
{
u32 int_mask;
int_mask = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK);
if (enable)
int_mask |= PWRC_ON_KEY_BIT;
else
int_mask &= ~PWRC_ON_KEY_BIT;
sirfsoc_rtc_iobrg_writel(int_mask, pwrcdrv->pwrc_base + PWRC_INT_MASK);
}
static int sirfsoc_pwrc_open(struct input_dev *input)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
return 0;
}
static void sirfsoc_pwrc_close(struct input_dev *input)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
cancel_delayed_work_sync(&pwrcdrv->work);
}
static const struct of_device_id sirfsoc_pwrc_of_match[] = {
{ .compatible = "sirf,prima2-pwrc" },
{},
Input: sirfsoc-onkey - allow modular build CONFIG_INPUT may itself be a loadable module, but the sirf power key driver is listed as 'bool', which makes it possible to select a broken configuration with the driver built-in but the subsystem not loaded. In this configuration, we get a link error: drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': drivers/input/misc/sirfsoc-onkey.c:63: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_isr': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_probe': drivers/input/misc/sirfsoc-onkey.c:132: undefined reference to `devm_input_allocate_device' drivers/input/misc/sirfsoc-onkey.c:139: undefined reference to `input_set_capability' drivers/input/misc/sirfsoc-onkey.c:161: undefined reference to `input_register_device' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': drivers/input/misc/sirfsoc-onkey.c:48: undefined reference to `input_event' drivers/input/built-in.o: In function `sirfsoc_pwrc_report_event': include/linux/input.h:414: undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0x24): undefined reference to `input_event' drivers/input/built-in.o:(.debug_addr+0xbc): undefined reference to `devm_input_allocate_device' drivers/input/built-in.o:(.debug_addr+0x104): undefined reference to `input_set_capability' drivers/input/built-in.o:(.debug_addr+0x128): undefined reference to `input_register_device' This marks the driver as 'tristate' so it becomes possible to have it in a loadable module, mainly to help with randconfig builds. We also have to add a missing semicolon here, which ended up not being needed in built-in mode because the following MODULE_DEVICE_TABLE is an empty macro followed by another semicolon then. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-01-28 07:43:32 +08:00
};
MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
static int sirfsoc_pwrc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct sirfsoc_pwrc_drvdata *pwrcdrv;
int irq;
int error;
pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
GFP_KERNEL);
if (!pwrcdrv) {
dev_info(&pdev->dev, "Not enough memory for the device data\n");
return -ENOMEM;
}
/*
* We can't use of_iomap because pwrc is not mapped in memory,
* the so-called base address is only offset in rtciobrg
*/
error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
if (error) {
dev_err(&pdev->dev,
"unable to find base address of pwrc node in dtb\n");
return error;
}
pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
if (!pwrcdrv->input)
return -ENOMEM;
pwrcdrv->input->name = "sirfsoc pwrckey";
pwrcdrv->input->phys = "pwrc/input0";
pwrcdrv->input->evbit[0] = BIT_MASK(EV_KEY);
input_set_capability(pwrcdrv->input, EV_KEY, KEY_POWER);
INIT_DELAYED_WORK(&pwrcdrv->work, sirfsoc_pwrc_report_event);
pwrcdrv->input->open = sirfsoc_pwrc_open;
pwrcdrv->input->close = sirfsoc_pwrc_close;
input_set_drvdata(pwrcdrv->input, pwrcdrv);
/* Make sure the device is quiesced */
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
irq = platform_get_irq(pdev, 0);
error = devm_request_irq(&pdev->dev, irq,
sirfsoc_pwrc_isr, 0,
"sirfsoc_pwrc_int", pwrcdrv);
if (error) {
dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
irq, error);
return error;
}
error = input_register_device(pwrcdrv->input);
if (error) {
dev_err(&pdev->dev,
"unable to register input device, error: %d\n",
error);
return error;
}
dev_set_drvdata(&pdev->dev, pwrcdrv);
device_init_wakeup(&pdev->dev, 1);
return 0;
}
static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
{
struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
struct input_dev *input = pwrcdrv->input;
/*
* Do not mask pwrc interrupt as we want pwrc work as a wakeup source
* if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
*/
mutex_lock(&input->mutex);
if (input->users)
sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
mutex_unlock(&input->mutex);
return 0;
}
static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
static struct platform_driver sirfsoc_pwrc_driver = {
.probe = sirfsoc_pwrc_probe,
.driver = {
.name = "sirfsoc-pwrc",
.pm = &sirfsoc_pwrc_pm_ops,
.of_match_table = sirfsoc_pwrc_of_match,
}
};
module_platform_driver(sirfsoc_pwrc_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>");
MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
MODULE_ALIAS("platform:sirfsoc-pwrc");