linux/net/mac80211/debugfs_netdev.c

439 lines
12 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/if.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/notifier.h>
#include <net/mac80211.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "rate.h"
#include "debugfs.h"
#include "debugfs_netdev.h"
static ssize_t ieee80211_if_read(
struct ieee80211_sub_if_data *sdata,
char __user *userbuf,
size_t count, loff_t *ppos,
ssize_t (*format)(const struct ieee80211_sub_if_data *, char *, int))
{
char buf[70];
ssize_t ret = -EINVAL;
read_lock(&dev_base_lock);
if (sdata->dev->reg_state == NETREG_REGISTERED)
ret = (*format)(sdata, buf, sizeof(buf));
read_unlock(&dev_base_lock);
if (ret != -EINVAL)
ret = simple_read_from_buffer(userbuf, count, ppos, buf, ret);
return ret;
}
static ssize_t ieee80211_if_write(
struct ieee80211_sub_if_data *sdata,
const char __user *userbuf,
size_t count, loff_t *ppos,
ssize_t (*write)(struct ieee80211_sub_if_data *, const char *, int))
{
u8 *buf;
ssize_t ret;
buf = kmalloc(count, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = -EFAULT;
if (copy_from_user(buf, userbuf, count))
goto freebuf;
ret = -ENODEV;
rtnl_lock();
if (sdata->dev->reg_state == NETREG_REGISTERED)
ret = (*write)(sdata, buf, count);
rtnl_unlock();
freebuf:
kfree(buf);
return ret;
}
#define IEEE80211_IF_FMT(name, field, format_string) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, char *buf, \
int buflen) \
{ \
return scnprintf(buf, buflen, format_string, sdata->field); \
}
#define IEEE80211_IF_FMT_DEC(name, field) \
IEEE80211_IF_FMT(name, field, "%d\n")
#define IEEE80211_IF_FMT_HEX(name, field) \
IEEE80211_IF_FMT(name, field, "%#x\n")
#define IEEE80211_IF_FMT_SIZE(name, field) \
IEEE80211_IF_FMT(name, field, "%zd\n")
#define IEEE80211_IF_FMT_ATOMIC(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, \
char *buf, int buflen) \
{ \
return scnprintf(buf, buflen, "%d\n", atomic_read(&sdata->field));\
}
#define IEEE80211_IF_FMT_MAC(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, char *buf, \
int buflen) \
{ \
return scnprintf(buf, buflen, "%pM\n", sdata->field); \
}
#define IEEE80211_IF_FMT_DEC_DIV_16(name, field) \
static ssize_t ieee80211_if_fmt_##name( \
const struct ieee80211_sub_if_data *sdata, \
char *buf, int buflen) \
{ \
return scnprintf(buf, buflen, "%d\n", sdata->field / 16); \
}
#define __IEEE80211_IF_FILE(name, _write) \
static ssize_t ieee80211_if_read_##name(struct file *file, \
char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
return ieee80211_if_read(file->private_data, \
userbuf, count, ppos, \
ieee80211_if_fmt_##name); \
} \
static const struct file_operations name##_ops = { \
.read = ieee80211_if_read_##name, \
.write = (_write), \
.open = mac80211_open_file_generic, \
}
#define __IEEE80211_IF_FILE_W(name) \
static ssize_t ieee80211_if_write_##name(struct file *file, \
const char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
return ieee80211_if_write(file->private_data, userbuf, count, \
ppos, ieee80211_if_parse_##name); \
} \
__IEEE80211_IF_FILE(name, ieee80211_if_write_##name)
#define IEEE80211_IF_FILE(name, field, format) \
IEEE80211_IF_FMT_##format(name, field) \
__IEEE80211_IF_FILE(name, NULL)
/* common attributes */
IEEE80211_IF_FILE(drop_unencrypted, drop_unencrypted, DEC);
IEEE80211_IF_FILE(rc_rateidx_mask_2ghz, rc_rateidx_mask[IEEE80211_BAND_2GHZ],
HEX);
IEEE80211_IF_FILE(rc_rateidx_mask_5ghz, rc_rateidx_mask[IEEE80211_BAND_5GHZ],
HEX);
/* STA attributes */
IEEE80211_IF_FILE(bssid, u.mgd.bssid, MAC);
IEEE80211_IF_FILE(aid, u.mgd.aid, DEC);
IEEE80211_IF_FILE(last_beacon, u.mgd.last_beacon_signal, DEC);
IEEE80211_IF_FILE(ave_beacon, u.mgd.ave_beacon_signal, DEC_DIV_16);
static int ieee80211_set_smps(struct ieee80211_sub_if_data *sdata,
enum ieee80211_smps_mode smps_mode)
{
struct ieee80211_local *local = sdata->local;
int err;
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) &&
smps_mode == IEEE80211_SMPS_STATIC)
return -EINVAL;
/* auto should be dynamic if in PS mode */
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) &&
(smps_mode == IEEE80211_SMPS_DYNAMIC ||
smps_mode == IEEE80211_SMPS_AUTOMATIC))
return -EINVAL;
/* supported only on managed interfaces for now */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
mutex_lock(&local->iflist_mtx);
err = __ieee80211_request_smps(sdata, smps_mode);
mutex_unlock(&local->iflist_mtx);
return err;
}
static const char *smps_modes[IEEE80211_SMPS_NUM_MODES] = {
[IEEE80211_SMPS_AUTOMATIC] = "auto",
[IEEE80211_SMPS_OFF] = "off",
[IEEE80211_SMPS_STATIC] = "static",
[IEEE80211_SMPS_DYNAMIC] = "dynamic",
};
static ssize_t ieee80211_if_fmt_smps(const struct ieee80211_sub_if_data *sdata,
char *buf, int buflen)
{
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
return snprintf(buf, buflen, "request: %s\nused: %s\n",
smps_modes[sdata->u.mgd.req_smps],
smps_modes[sdata->u.mgd.ap_smps]);
}
static ssize_t ieee80211_if_parse_smps(struct ieee80211_sub_if_data *sdata,
const char *buf, int buflen)
{
enum ieee80211_smps_mode mode;
for (mode = 0; mode < IEEE80211_SMPS_NUM_MODES; mode++) {
if (strncmp(buf, smps_modes[mode], buflen) == 0) {
int err = ieee80211_set_smps(sdata, mode);
if (!err)
return buflen;
return err;
}
}
return -EINVAL;
}
__IEEE80211_IF_FILE_W(smps);
/* AP attributes */
IEEE80211_IF_FILE(num_sta_ps, u.ap.num_sta_ps, ATOMIC);
IEEE80211_IF_FILE(dtim_count, u.ap.dtim_count, DEC);
static ssize_t ieee80211_if_fmt_num_buffered_multicast(
const struct ieee80211_sub_if_data *sdata, char *buf, int buflen)
{
return scnprintf(buf, buflen, "%u\n",
skb_queue_len(&sdata->u.ap.ps_bc_buf));
}
__IEEE80211_IF_FILE(num_buffered_multicast, NULL);
/* WDS attributes */
IEEE80211_IF_FILE(peer, u.wds.remote_addr, MAC);
#ifdef CONFIG_MAC80211_MESH
/* Mesh stats attributes */
IEEE80211_IF_FILE(fwded_mcast, u.mesh.mshstats.fwded_mcast, DEC);
IEEE80211_IF_FILE(fwded_unicast, u.mesh.mshstats.fwded_unicast, DEC);
IEEE80211_IF_FILE(fwded_frames, u.mesh.mshstats.fwded_frames, DEC);
IEEE80211_IF_FILE(dropped_frames_ttl, u.mesh.mshstats.dropped_frames_ttl, DEC);
IEEE80211_IF_FILE(dropped_frames_no_route,
u.mesh.mshstats.dropped_frames_no_route, DEC);
IEEE80211_IF_FILE(estab_plinks, u.mesh.mshstats.estab_plinks, ATOMIC);
/* Mesh parameters */
IEEE80211_IF_FILE(dot11MeshMaxRetries,
u.mesh.mshcfg.dot11MeshMaxRetries, DEC);
IEEE80211_IF_FILE(dot11MeshRetryTimeout,
u.mesh.mshcfg.dot11MeshRetryTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshConfirmTimeout,
u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHoldingTimeout,
u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC);
IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC);
IEEE80211_IF_FILE(dot11MeshMaxPeerLinks,
u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout,
u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval,
u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime,
u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries,
u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC);
IEEE80211_IF_FILE(path_refresh_time,
u.mesh.mshcfg.path_refresh_time, DEC);
IEEE80211_IF_FILE(min_discovery_timeout,
u.mesh.mshcfg.min_discovery_timeout, DEC);
IEEE80211_IF_FILE(dot11MeshHWMPRootMode,
u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC);
#endif
#define DEBUGFS_ADD(name) \
debugfs_create_file(#name, 0400, sdata->debugfs.dir, \
sdata, &name##_ops);
#define DEBUGFS_ADD_MODE(name, mode) \
debugfs_create_file(#name, mode, sdata->debugfs.dir, \
sdata, &name##_ops);
static void add_sta_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted);
DEBUGFS_ADD(rc_rateidx_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_mask_5ghz);
DEBUGFS_ADD(bssid);
DEBUGFS_ADD(aid);
DEBUGFS_ADD(last_beacon);
DEBUGFS_ADD(ave_beacon);
DEBUGFS_ADD_MODE(smps, 0600);
}
static void add_ap_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted);
DEBUGFS_ADD(rc_rateidx_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_mask_5ghz);
DEBUGFS_ADD(num_sta_ps);
DEBUGFS_ADD(dtim_count);
DEBUGFS_ADD(num_buffered_multicast);
}
static void add_wds_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted);
DEBUGFS_ADD(rc_rateidx_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_mask_5ghz);
DEBUGFS_ADD(peer);
}
static void add_vlan_files(struct ieee80211_sub_if_data *sdata)
{
DEBUGFS_ADD(drop_unencrypted);
DEBUGFS_ADD(rc_rateidx_mask_2ghz);
DEBUGFS_ADD(rc_rateidx_mask_5ghz);
}
static void add_monitor_files(struct ieee80211_sub_if_data *sdata)
{
}
#ifdef CONFIG_MAC80211_MESH
static void add_mesh_stats(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir = debugfs_create_dir("mesh_stats",
sdata->debugfs.dir);
#define MESHSTATS_ADD(name)\
debugfs_create_file(#name, 0400, dir, sdata, &name##_ops);
MESHSTATS_ADD(fwded_mcast);
MESHSTATS_ADD(fwded_unicast);
MESHSTATS_ADD(fwded_frames);
MESHSTATS_ADD(dropped_frames_ttl);
MESHSTATS_ADD(dropped_frames_no_route);
MESHSTATS_ADD(estab_plinks);
#undef MESHSTATS_ADD
}
static void add_mesh_config(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir = debugfs_create_dir("mesh_config",
sdata->debugfs.dir);
#define MESHPARAMS_ADD(name) \
debugfs_create_file(#name, 0600, dir, sdata, &name##_ops);
MESHPARAMS_ADD(dot11MeshMaxRetries);
MESHPARAMS_ADD(dot11MeshRetryTimeout);
MESHPARAMS_ADD(dot11MeshConfirmTimeout);
MESHPARAMS_ADD(dot11MeshHoldingTimeout);
MESHPARAMS_ADD(dot11MeshTTL);
MESHPARAMS_ADD(auto_open_plinks);
MESHPARAMS_ADD(dot11MeshMaxPeerLinks);
MESHPARAMS_ADD(dot11MeshHWMPactivePathTimeout);
MESHPARAMS_ADD(dot11MeshHWMPpreqMinInterval);
MESHPARAMS_ADD(dot11MeshHWMPnetDiameterTraversalTime);
MESHPARAMS_ADD(dot11MeshHWMPmaxPREQretries);
MESHPARAMS_ADD(path_refresh_time);
MESHPARAMS_ADD(min_discovery_timeout);
#undef MESHPARAMS_ADD
}
#endif
static void add_files(struct ieee80211_sub_if_data *sdata)
{
if (!sdata->debugfs.dir)
return;
switch (sdata->vif.type) {
case NL80211_IFTYPE_MESH_POINT:
#ifdef CONFIG_MAC80211_MESH
add_mesh_stats(sdata);
add_mesh_config(sdata);
#endif
break;
case NL80211_IFTYPE_STATION:
add_sta_files(sdata);
break;
case NL80211_IFTYPE_ADHOC:
/* XXX */
break;
case NL80211_IFTYPE_AP:
add_ap_files(sdata);
break;
case NL80211_IFTYPE_WDS:
add_wds_files(sdata);
break;
case NL80211_IFTYPE_MONITOR:
add_monitor_files(sdata);
break;
case NL80211_IFTYPE_AP_VLAN:
add_vlan_files(sdata);
break;
default:
break;
}
}
void ieee80211_debugfs_add_netdev(struct ieee80211_sub_if_data *sdata)
{
char buf[10+IFNAMSIZ];
sprintf(buf, "netdev:%s", sdata->name);
sdata->debugfs.dir = debugfs_create_dir(buf,
sdata->local->hw.wiphy->debugfsdir);
add_files(sdata);
}
void ieee80211_debugfs_remove_netdev(struct ieee80211_sub_if_data *sdata)
{
if (!sdata->debugfs.dir)
return;
debugfs_remove_recursive(sdata->debugfs.dir);
sdata->debugfs.dir = NULL;
}
void ieee80211_debugfs_rename_netdev(struct ieee80211_sub_if_data *sdata)
{
struct dentry *dir;
char buf[10 + IFNAMSIZ];
dir = sdata->debugfs.dir;
if (!dir)
return;
sprintf(buf, "netdev:%s", sdata->name);
if (!debugfs_rename(dir->d_parent, dir, dir->d_parent, buf))
printk(KERN_ERR "mac80211: debugfs: failed to rename debugfs "
"dir to %s\n", buf);
}