linux/fs/xfs/xfs_extfree_item.c

559 lines
15 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2001,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_bit.h"
#include "xfs_mount.h"
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_buf_item.h"
#include "xfs_extfree_item.h"
#include "xfs_log.h"
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
#include "xfs_btree.h"
#include "xfs_rmap.h"
kmem_zone_t *xfs_efi_zone;
kmem_zone_t *xfs_efd_zone;
static inline struct xfs_efi_log_item *EFI_ITEM(struct xfs_log_item *lip)
{
return container_of(lip, struct xfs_efi_log_item, efi_item);
}
void
xfs_efi_item_free(
struct xfs_efi_log_item *efip)
{
xfs: allocate log vector buffers outside CIL context lock One of the problems we currently have with delayed logging is that under serious memory pressure we can deadlock memory reclaim. THis occurs when memory reclaim (such as run by kswapd) is reclaiming XFS inodes and issues a log force to unpin inodes that are dirty in the CIL. The CIL is pushed, but this will only occur once it gets the CIL context lock to ensure that all committing transactions are complete and no new transactions start being committed to the CIL while the push switches to a new context. The deadlock occurs when the CIL context lock is held by a committing process that is doing memory allocation for log vector buffers, and that allocation is then blocked on memory reclaim making progress. Memory reclaim, however, is blocked waiting for a log force to make progress, and so we effectively deadlock at this point. To solve this problem, we have to move the CIL log vector buffer allocation outside of the context lock so that memory reclaim can always make progress when it needs to force the log. The problem with doing this is that a CIL push can take place while we are determining if we need to allocate a new log vector buffer for an item and hence the current log vector may go away without warning. That means we canot rely on the existing log vector being present when we finally grab the context lock and so we must have a replacement buffer ready to go at all times. To ensure this, introduce a "shadow log vector" buffer that is always guaranteed to be present when we gain the CIL context lock and format the item. This shadow buffer may or may not be used during the formatting, but if the log item does not have an existing log vector buffer or that buffer is too small for the new modifications, we swap it for the new shadow buffer and format the modifications into that new log vector buffer. The result of this is that for any object we modify more than once in a given CIL checkpoint, we double the memory required to track dirty regions in the log. For single modifications then we consume the shadow log vectorwe allocate on commit, and that gets consumed by the checkpoint. However, if we make multiple modifications, then the second transaction commit will allocate a shadow log vector and hence we will end up with double the memory usage as only one of the log vectors is consumed by the CIL checkpoint. The remaining shadow vector will be freed when th elog item is freed. This can probably be optimised in future - access to the shadow log vector is serialised by the object lock (as opposited to the active log vector, which is controlled by the CIL context lock) and so we can probably free shadow log vector from some objects when the log item is marked clean on removal from the AIL. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-07-22 07:52:35 +08:00
kmem_free(efip->efi_item.li_lv_shadow);
if (efip->efi_format.efi_nextents > XFS_EFI_MAX_FAST_EXTENTS)
kmem_free(efip);
else
kmem_zone_free(xfs_efi_zone, efip);
}
/*
* This returns the number of iovecs needed to log the given efi item.
* We only need 1 iovec for an efi item. It just logs the efi_log_format
* structure.
*/
static inline int
xfs_efi_item_sizeof(
struct xfs_efi_log_item *efip)
{
return sizeof(struct xfs_efi_log_format) +
(efip->efi_format.efi_nextents - 1) * sizeof(xfs_extent_t);
}
STATIC void
xfs_efi_item_size(
struct xfs_log_item *lip,
int *nvecs,
int *nbytes)
{
*nvecs += 1;
*nbytes += xfs_efi_item_sizeof(EFI_ITEM(lip));
}
/*
* This is called to fill in the vector of log iovecs for the
* given efi log item. We use only 1 iovec, and we point that
* at the efi_log_format structure embedded in the efi item.
* It is at this point that we assert that all of the extent
* slots in the efi item have been filled.
*/
STATIC void
xfs_efi_item_format(
struct xfs_log_item *lip,
struct xfs_log_vec *lv)
{
struct xfs_efi_log_item *efip = EFI_ITEM(lip);
struct xfs_log_iovec *vecp = NULL;
ASSERT(atomic_read(&efip->efi_next_extent) ==
efip->efi_format.efi_nextents);
efip->efi_format.efi_type = XFS_LI_EFI;
efip->efi_format.efi_size = 1;
xlog_copy_iovec(lv, &vecp, XLOG_REG_TYPE_EFI_FORMAT,
&efip->efi_format,
xfs_efi_item_sizeof(efip));
}
/*
* Pinning has no meaning for an efi item, so just return.
*/
STATIC void
xfs_efi_item_pin(
struct xfs_log_item *lip)
{
}
/*
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
* The unpin operation is the last place an EFI is manipulated in the log. It is
* either inserted in the AIL or aborted in the event of a log I/O error. In
* either case, the EFI transaction has been successfully committed to make it
* this far. Therefore, we expect whoever committed the EFI to either construct
* and commit the EFD or drop the EFD's reference in the event of error. Simply
* drop the log's EFI reference now that the log is done with it.
*/
STATIC void
xfs_efi_item_unpin(
struct xfs_log_item *lip,
int remove)
{
struct xfs_efi_log_item *efip = EFI_ITEM(lip);
xfs_efi_release(efip);
}
/*
xfs: on-stack delayed write buffer lists Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 13:58:39 +08:00
* Efi items have no locking or pushing. However, since EFIs are pulled from
* the AIL when their corresponding EFDs are committed to disk, their situation
* is very similar to being pinned. Return XFS_ITEM_PINNED so that the caller
* will eventually flush the log. This should help in getting the EFI out of
* the AIL.
*/
STATIC uint
xfs: on-stack delayed write buffer lists Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 13:58:39 +08:00
xfs_efi_item_push(
struct xfs_log_item *lip,
struct list_head *buffer_list)
{
return XFS_ITEM_PINNED;
}
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
/*
* The EFI has been either committed or aborted if the transaction has been
* cancelled. If the transaction was cancelled, an EFD isn't going to be
* constructed and thus we free the EFI here directly.
*/
STATIC void
xfs_efi_item_unlock(
struct xfs_log_item *lip)
{
if (lip->li_flags & XFS_LI_ABORTED)
xfs_efi_item_free(EFI_ITEM(lip));
}
/*
* The EFI is logged only once and cannot be moved in the log, so simply return
xfs: don't free EFIs before the EFDs are committed Filesystems are occasionally being shut down with this error: xfs_trans_ail_delete_bulk: attempting to delete a log item that is not in the AIL. It was diagnosed to be related to the EFI/EFD commit order when the EFI and EFD are in different checkpoints and the EFD is committed before the EFI here: http://oss.sgi.com/archives/xfs/2013-01/msg00082.html The real problem is that a single bit cannot fully describe the states that the EFI/EFD processing can be in. These completion states are: EFI EFI in AIL EFD Result committed/unpinned Yes committed OK committed/pinned No committed Shutdown uncommitted No committed Shutdown Note that the "result" field is what should happen, not what does happen. The current logic is broken and handles the first two cases correctly by luck. That is, the code will free the EFI if the XFS_EFI_COMMITTED bit is *not* set, rather than if it is set. The inverted logic "works" because if both EFI and EFD are committed, then the first __xfs_efi_release() call clears the XFS_EFI_COMMITTED bit, and the second frees the EFI item. Hence as long as xfs_efi_item_committed() has been called, everything appears to be fine. It is the third case where the logic fails - where xfs_efd_item_committed() is called before xfs_efi_item_committed(), and that results in the EFI being freed before it has been committed. That is the bug that triggered the shutdown, and hence keeping track of whether the EFI has been committed or not is insufficient to correctly order the EFI/EFD operations w.r.t. the AIL. What we really want is this: the EFI is always placed into the AIL before the last reference goes away. The only way to guarantee that is that the EFI is not freed until after it has been unpinned *and* the EFD has been committed. That is, restructure the logic so that the only case that can occur is the first case. This can be done easily by replacing the XFS_EFI_COMMITTED with an EFI reference count. The EFI is initialised with it's own count, and that is not released until it is unpinned. However, there is a complication to this method - the high level EFI/EFD code in xfs_bmap_finish() does not hold direct references to the EFI structure, and runs a transaction commit between the EFI and EFD processing. Hence the EFI can be freed even before the EFD is created using such a method. Further, log recovery uses the AIL for tracking EFI/EFDs that need to be recovered, but it uses the AIL *differently* to the EFI transaction commit. Hence log recovery never pins or unpins EFIs, so we can't drop the EFI reference count indirectly to free the EFI. However, this doesn't prevent us from using a reference count here. There is a 1:1 relationship between EFIs and EFDs, so when we initialise the EFI we can take a reference count for the EFD as well. This solves the xfs_bmap_finish() issue - the EFI will never be freed until the EFD is processed. In terms of log recovery, during the committing of the EFD we can look for the XFS_EFI_RECOVERED bit being set and drop the EFI reference as well, thereby ensuring everything works correctly there as well. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 11:09:21 +08:00
* the lsn at which it's been logged.
*/
STATIC xfs_lsn_t
xfs_efi_item_committed(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
return lsn;
}
/*
* The EFI dependency tracking op doesn't do squat. It can't because
* it doesn't know where the free extent is coming from. The dependency
* tracking has to be handled by the "enclosing" metadata object. For
* example, for inodes, the inode is locked throughout the extent freeing
* so the dependency should be recorded there.
*/
STATIC void
xfs_efi_item_committing(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
}
/*
* This is the ops vector shared by all efi log items.
*/
static const struct xfs_item_ops xfs_efi_item_ops = {
.iop_size = xfs_efi_item_size,
.iop_format = xfs_efi_item_format,
.iop_pin = xfs_efi_item_pin,
.iop_unpin = xfs_efi_item_unpin,
.iop_unlock = xfs_efi_item_unlock,
.iop_committed = xfs_efi_item_committed,
.iop_push = xfs_efi_item_push,
.iop_committing = xfs_efi_item_committing
};
/*
* Allocate and initialize an efi item with the given number of extents.
*/
struct xfs_efi_log_item *
xfs_efi_init(
struct xfs_mount *mp,
uint nextents)
{
struct xfs_efi_log_item *efip;
uint size;
ASSERT(nextents > 0);
if (nextents > XFS_EFI_MAX_FAST_EXTENTS) {
size = (uint)(sizeof(xfs_efi_log_item_t) +
((nextents - 1) * sizeof(xfs_extent_t)));
efip = kmem_zalloc(size, KM_SLEEP);
} else {
efip = kmem_zone_zalloc(xfs_efi_zone, KM_SLEEP);
}
xfs_log_item_init(mp, &efip->efi_item, XFS_LI_EFI, &xfs_efi_item_ops);
efip->efi_format.efi_nextents = nextents;
efip->efi_format.efi_id = (uintptr_t)(void *)efip;
atomic_set(&efip->efi_next_extent, 0);
xfs: don't free EFIs before the EFDs are committed Filesystems are occasionally being shut down with this error: xfs_trans_ail_delete_bulk: attempting to delete a log item that is not in the AIL. It was diagnosed to be related to the EFI/EFD commit order when the EFI and EFD are in different checkpoints and the EFD is committed before the EFI here: http://oss.sgi.com/archives/xfs/2013-01/msg00082.html The real problem is that a single bit cannot fully describe the states that the EFI/EFD processing can be in. These completion states are: EFI EFI in AIL EFD Result committed/unpinned Yes committed OK committed/pinned No committed Shutdown uncommitted No committed Shutdown Note that the "result" field is what should happen, not what does happen. The current logic is broken and handles the first two cases correctly by luck. That is, the code will free the EFI if the XFS_EFI_COMMITTED bit is *not* set, rather than if it is set. The inverted logic "works" because if both EFI and EFD are committed, then the first __xfs_efi_release() call clears the XFS_EFI_COMMITTED bit, and the second frees the EFI item. Hence as long as xfs_efi_item_committed() has been called, everything appears to be fine. It is the third case where the logic fails - where xfs_efd_item_committed() is called before xfs_efi_item_committed(), and that results in the EFI being freed before it has been committed. That is the bug that triggered the shutdown, and hence keeping track of whether the EFI has been committed or not is insufficient to correctly order the EFI/EFD operations w.r.t. the AIL. What we really want is this: the EFI is always placed into the AIL before the last reference goes away. The only way to guarantee that is that the EFI is not freed until after it has been unpinned *and* the EFD has been committed. That is, restructure the logic so that the only case that can occur is the first case. This can be done easily by replacing the XFS_EFI_COMMITTED with an EFI reference count. The EFI is initialised with it's own count, and that is not released until it is unpinned. However, there is a complication to this method - the high level EFI/EFD code in xfs_bmap_finish() does not hold direct references to the EFI structure, and runs a transaction commit between the EFI and EFD processing. Hence the EFI can be freed even before the EFD is created using such a method. Further, log recovery uses the AIL for tracking EFI/EFDs that need to be recovered, but it uses the AIL *differently* to the EFI transaction commit. Hence log recovery never pins or unpins EFIs, so we can't drop the EFI reference count indirectly to free the EFI. However, this doesn't prevent us from using a reference count here. There is a 1:1 relationship between EFIs and EFDs, so when we initialise the EFI we can take a reference count for the EFD as well. This solves the xfs_bmap_finish() issue - the EFI will never be freed until the EFD is processed. In terms of log recovery, during the committing of the EFD we can look for the XFS_EFI_RECOVERED bit being set and drop the EFI reference as well, thereby ensuring everything works correctly there as well. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 11:09:21 +08:00
atomic_set(&efip->efi_refcount, 2);
return efip;
}
/*
* Copy an EFI format buffer from the given buf, and into the destination
* EFI format structure.
* The given buffer can be in 32 bit or 64 bit form (which has different padding),
* one of which will be the native format for this kernel.
* It will handle the conversion of formats if necessary.
*/
int
xfs_efi_copy_format(xfs_log_iovec_t *buf, xfs_efi_log_format_t *dst_efi_fmt)
{
xfs_efi_log_format_t *src_efi_fmt = buf->i_addr;
uint i;
uint len = sizeof(xfs_efi_log_format_t) +
(src_efi_fmt->efi_nextents - 1) * sizeof(xfs_extent_t);
uint len32 = sizeof(xfs_efi_log_format_32_t) +
(src_efi_fmt->efi_nextents - 1) * sizeof(xfs_extent_32_t);
uint len64 = sizeof(xfs_efi_log_format_64_t) +
(src_efi_fmt->efi_nextents - 1) * sizeof(xfs_extent_64_t);
if (buf->i_len == len) {
memcpy((char *)dst_efi_fmt, (char*)src_efi_fmt, len);
return 0;
} else if (buf->i_len == len32) {
xfs_efi_log_format_32_t *src_efi_fmt_32 = buf->i_addr;
dst_efi_fmt->efi_type = src_efi_fmt_32->efi_type;
dst_efi_fmt->efi_size = src_efi_fmt_32->efi_size;
dst_efi_fmt->efi_nextents = src_efi_fmt_32->efi_nextents;
dst_efi_fmt->efi_id = src_efi_fmt_32->efi_id;
for (i = 0; i < dst_efi_fmt->efi_nextents; i++) {
dst_efi_fmt->efi_extents[i].ext_start =
src_efi_fmt_32->efi_extents[i].ext_start;
dst_efi_fmt->efi_extents[i].ext_len =
src_efi_fmt_32->efi_extents[i].ext_len;
}
return 0;
} else if (buf->i_len == len64) {
xfs_efi_log_format_64_t *src_efi_fmt_64 = buf->i_addr;
dst_efi_fmt->efi_type = src_efi_fmt_64->efi_type;
dst_efi_fmt->efi_size = src_efi_fmt_64->efi_size;
dst_efi_fmt->efi_nextents = src_efi_fmt_64->efi_nextents;
dst_efi_fmt->efi_id = src_efi_fmt_64->efi_id;
for (i = 0; i < dst_efi_fmt->efi_nextents; i++) {
dst_efi_fmt->efi_extents[i].ext_start =
src_efi_fmt_64->efi_extents[i].ext_start;
dst_efi_fmt->efi_extents[i].ext_len =
src_efi_fmt_64->efi_extents[i].ext_len;
}
return 0;
}
return -EFSCORRUPTED;
}
/*
* Freeing the efi requires that we remove it from the AIL if it has already
* been placed there. However, the EFI may not yet have been placed in the AIL
* when called by xfs_efi_release() from EFD processing due to the ordering of
* committed vs unpin operations in bulk insert operations. Hence the reference
* count to ensure only the last caller frees the EFI.
*/
void
xfs_efi_release(
struct xfs_efi_log_item *efip)
{
ASSERT(atomic_read(&efip->efi_refcount) > 0);
if (atomic_dec_and_test(&efip->efi_refcount)) {
xfs_trans_ail_remove(&efip->efi_item, SHUTDOWN_LOG_IO_ERROR);
xfs_efi_item_free(efip);
}
}
static inline struct xfs_efd_log_item *EFD_ITEM(struct xfs_log_item *lip)
{
return container_of(lip, struct xfs_efd_log_item, efd_item);
}
STATIC void
xfs_efd_item_free(struct xfs_efd_log_item *efdp)
{
xfs: allocate log vector buffers outside CIL context lock One of the problems we currently have with delayed logging is that under serious memory pressure we can deadlock memory reclaim. THis occurs when memory reclaim (such as run by kswapd) is reclaiming XFS inodes and issues a log force to unpin inodes that are dirty in the CIL. The CIL is pushed, but this will only occur once it gets the CIL context lock to ensure that all committing transactions are complete and no new transactions start being committed to the CIL while the push switches to a new context. The deadlock occurs when the CIL context lock is held by a committing process that is doing memory allocation for log vector buffers, and that allocation is then blocked on memory reclaim making progress. Memory reclaim, however, is blocked waiting for a log force to make progress, and so we effectively deadlock at this point. To solve this problem, we have to move the CIL log vector buffer allocation outside of the context lock so that memory reclaim can always make progress when it needs to force the log. The problem with doing this is that a CIL push can take place while we are determining if we need to allocate a new log vector buffer for an item and hence the current log vector may go away without warning. That means we canot rely on the existing log vector being present when we finally grab the context lock and so we must have a replacement buffer ready to go at all times. To ensure this, introduce a "shadow log vector" buffer that is always guaranteed to be present when we gain the CIL context lock and format the item. This shadow buffer may or may not be used during the formatting, but if the log item does not have an existing log vector buffer or that buffer is too small for the new modifications, we swap it for the new shadow buffer and format the modifications into that new log vector buffer. The result of this is that for any object we modify more than once in a given CIL checkpoint, we double the memory required to track dirty regions in the log. For single modifications then we consume the shadow log vectorwe allocate on commit, and that gets consumed by the checkpoint. However, if we make multiple modifications, then the second transaction commit will allocate a shadow log vector and hence we will end up with double the memory usage as only one of the log vectors is consumed by the CIL checkpoint. The remaining shadow vector will be freed when th elog item is freed. This can probably be optimised in future - access to the shadow log vector is serialised by the object lock (as opposited to the active log vector, which is controlled by the CIL context lock) and so we can probably free shadow log vector from some objects when the log item is marked clean on removal from the AIL. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-07-22 07:52:35 +08:00
kmem_free(efdp->efd_item.li_lv_shadow);
if (efdp->efd_format.efd_nextents > XFS_EFD_MAX_FAST_EXTENTS)
kmem_free(efdp);
else
kmem_zone_free(xfs_efd_zone, efdp);
}
/*
* This returns the number of iovecs needed to log the given efd item.
* We only need 1 iovec for an efd item. It just logs the efd_log_format
* structure.
*/
static inline int
xfs_efd_item_sizeof(
struct xfs_efd_log_item *efdp)
{
return sizeof(xfs_efd_log_format_t) +
(efdp->efd_format.efd_nextents - 1) * sizeof(xfs_extent_t);
}
STATIC void
xfs_efd_item_size(
struct xfs_log_item *lip,
int *nvecs,
int *nbytes)
{
*nvecs += 1;
*nbytes += xfs_efd_item_sizeof(EFD_ITEM(lip));
}
/*
* This is called to fill in the vector of log iovecs for the
* given efd log item. We use only 1 iovec, and we point that
* at the efd_log_format structure embedded in the efd item.
* It is at this point that we assert that all of the extent
* slots in the efd item have been filled.
*/
STATIC void
xfs_efd_item_format(
struct xfs_log_item *lip,
struct xfs_log_vec *lv)
{
struct xfs_efd_log_item *efdp = EFD_ITEM(lip);
struct xfs_log_iovec *vecp = NULL;
ASSERT(efdp->efd_next_extent == efdp->efd_format.efd_nextents);
efdp->efd_format.efd_type = XFS_LI_EFD;
efdp->efd_format.efd_size = 1;
xlog_copy_iovec(lv, &vecp, XLOG_REG_TYPE_EFD_FORMAT,
&efdp->efd_format,
xfs_efd_item_sizeof(efdp));
}
/*
* Pinning has no meaning for an efd item, so just return.
*/
STATIC void
xfs_efd_item_pin(
struct xfs_log_item *lip)
{
}
/*
* Since pinning has no meaning for an efd item, unpinning does
* not either.
*/
STATIC void
xfs_efd_item_unpin(
struct xfs_log_item *lip,
int remove)
{
}
/*
xfs: on-stack delayed write buffer lists Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 13:58:39 +08:00
* There isn't much you can do to push on an efd item. It is simply stuck
* waiting for the log to be flushed to disk.
*/
STATIC uint
xfs: on-stack delayed write buffer lists Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 13:58:39 +08:00
xfs_efd_item_push(
struct xfs_log_item *lip,
struct list_head *buffer_list)
{
xfs: on-stack delayed write buffer lists Queue delwri buffers on a local on-stack list instead of a per-buftarg one, and write back the buffers per-process instead of by waking up xfsbufd. This is now easily doable given that we have very few places left that write delwri buffers: - log recovery: Only done at mount time, and already forcing out the buffers synchronously using xfs_flush_buftarg - quotacheck: Same story. - dquot reclaim: Writes out dirty dquots on the LRU under memory pressure. We might want to look into doing more of this via xfsaild, but it's already more optimal than the synchronous inode reclaim that writes each buffer synchronously. - xfsaild: This is the main beneficiary of the change. By keeping a local list of buffers to write we reduce latency of writing out buffers, and more importably we can remove all the delwri list promotions which were hitting the buffer cache hard under sustained metadata loads. The implementation is very straight forward - xfs_buf_delwri_queue now gets a new list_head pointer that it adds the delwri buffers to, and all callers need to eventually submit the list using xfs_buf_delwi_submit or xfs_buf_delwi_submit_nowait. Buffers that already are on a delwri list are skipped in xfs_buf_delwri_queue, assuming they already are on another delwri list. The biggest change to pass down the buffer list was done to the AIL pushing. Now that we operate on buffers the trylock, push and pushbuf log item methods are merged into a single push routine, which tries to lock the item, and if possible add the buffer that needs writeback to the buffer list. This leads to much simpler code than the previous split but requires the individual IOP_PUSH instances to unlock and reacquire the AIL around calls to blocking routines. Given that xfsailds now also handle writing out buffers, the conditions for log forcing and the sleep times needed some small changes. The most important one is that we consider an AIL busy as long we still have buffers to push, and the other one is that we do increment the pushed LSN for buffers that are under flushing at this moment, but still count them towards the stuck items for restart purposes. Without this we could hammer on stuck items without ever forcing the log and not make progress under heavy random delete workloads on fast flash storage devices. [ Dave Chinner: - rebase on previous patches. - improved comments for XBF_DELWRI_Q handling - fix XBF_ASYNC handling in queue submission (test 106 failure) - rename delwri submit function buffer list parameters for clarity - xfs_efd_item_push() should return XFS_ITEM_PINNED ] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 13:58:39 +08:00
return XFS_ITEM_PINNED;
}
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
/*
* The EFD is either committed or aborted if the transaction is cancelled. If
* the transaction is cancelled, drop our reference to the EFI and free the EFD.
*/
STATIC void
xfs_efd_item_unlock(
struct xfs_log_item *lip)
{
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
struct xfs_efd_log_item *efdp = EFD_ITEM(lip);
if (lip->li_flags & XFS_LI_ABORTED) {
xfs_efi_release(efdp->efd_efip);
xfs_efd_item_free(efdp);
}
}
/*
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
* When the efd item is committed to disk, all we need to do is delete our
* reference to our partner efi item and then free ourselves. Since we're
* freeing ourselves we must return -1 to keep the transaction code from further
* referencing this item.
*/
STATIC xfs_lsn_t
xfs_efd_item_committed(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
struct xfs_efd_log_item *efdp = EFD_ITEM(lip);
/*
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
* Drop the EFI reference regardless of whether the EFD has been
* aborted. Once the EFD transaction is constructed, it is the sole
* responsibility of the EFD to release the EFI (even if the EFI is
* aborted due to log I/O error).
*/
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
xfs_efi_release(efdp->efd_efip);
xfs_efd_item_free(efdp);
xfs: fix efi/efd error handling to avoid fs shutdown hangs Freeing an extent in XFS involves logging an EFI (extent free intention), freeing the actual extent, and logging an EFD (extent free done). The EFI object is created with a reference count of 2: one for the current transaction and one for the subsequently created EFD. Under normal circumstances, the first reference is dropped when the EFI is unpinned and the second reference is dropped when the EFD is committed to the on-disk log. In event of errors or filesystem shutdown, there are various potential cleanup scenarios depending on the state of the EFI/EFD. The cleanup scenarios are confusing and racy, as demonstrated by the following test sequence: # mount $dev $mnt # fsstress -d $mnt -n 99999 -p 16 -z -f fallocate=1 \ -f punch=1 -f creat=1 -f unlink=1 & # sleep 5 # killall -9 fsstress; wait # godown -f $mnt # umount ... in which the final umount can hang due to the AIL being pinned indefinitely by one or more EFI items. This can occur due to several conditions. For example, if the shutdown occurs after the EFI is committed to the on-disk log and the EFD committed to the CIL, but before the EFD committed to the log, the EFD iop_committed() abort handler does not drop its reference to the EFI. Alternatively, manual error injection in the xfs_bmap_finish() codepath shows that if an error occurs after the EFI transaction is committed but before the EFD is constructed and logged, the EFI is never released from the AIL. Update the EFI/EFD item handling code to use a more straightforward and reliable approach to error handling. If an error occurs after the EFI transaction is committed and before the EFD is constructed, release the EFI explicitly from xfs_bmap_finish(). If the EFI transaction is cancelled, release the EFI in the unlock handler. Once the EFD is constructed, it is responsible for releasing the EFI under any circumstances (including whether the EFI item aborts due to log I/O error). Update the EFD item handlers to release the EFI if the transaction is cancelled or aborts due to log I/O error. Finally, update xfs_bmap_finish() to log at least one EFD extent to the transaction before xfs_free_extent() errors are handled to ensure the transaction is dirty and EFD item error handling is triggered. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-08-19 07:51:16 +08:00
return (xfs_lsn_t)-1;
}
/*
* The EFD dependency tracking op doesn't do squat. It can't because
* it doesn't know where the free extent is coming from. The dependency
* tracking has to be handled by the "enclosing" metadata object. For
* example, for inodes, the inode is locked throughout the extent freeing
* so the dependency should be recorded there.
*/
STATIC void
xfs_efd_item_committing(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
}
/*
* This is the ops vector shared by all efd log items.
*/
static const struct xfs_item_ops xfs_efd_item_ops = {
.iop_size = xfs_efd_item_size,
.iop_format = xfs_efd_item_format,
.iop_pin = xfs_efd_item_pin,
.iop_unpin = xfs_efd_item_unpin,
.iop_unlock = xfs_efd_item_unlock,
.iop_committed = xfs_efd_item_committed,
.iop_push = xfs_efd_item_push,
.iop_committing = xfs_efd_item_committing
};
/*
* Allocate and initialize an efd item with the given number of extents.
*/
struct xfs_efd_log_item *
xfs_efd_init(
struct xfs_mount *mp,
struct xfs_efi_log_item *efip,
uint nextents)
{
struct xfs_efd_log_item *efdp;
uint size;
ASSERT(nextents > 0);
if (nextents > XFS_EFD_MAX_FAST_EXTENTS) {
size = (uint)(sizeof(xfs_efd_log_item_t) +
((nextents - 1) * sizeof(xfs_extent_t)));
efdp = kmem_zalloc(size, KM_SLEEP);
} else {
efdp = kmem_zone_zalloc(xfs_efd_zone, KM_SLEEP);
}
xfs_log_item_init(mp, &efdp->efd_item, XFS_LI_EFD, &xfs_efd_item_ops);
efdp->efd_efip = efip;
efdp->efd_format.efd_nextents = nextents;
efdp->efd_format.efd_efi_id = efip->efi_format.efi_id;
return efdp;
}
/*
* Process an extent free intent item that was recovered from
* the log. We need to free the extents that it describes.
*/
int
xfs_efi_recover(
struct xfs_mount *mp,
struct xfs_efi_log_item *efip)
{
struct xfs_efd_log_item *efdp;
struct xfs_trans *tp;
int i;
int error = 0;
xfs_extent_t *extp;
xfs_fsblock_t startblock_fsb;
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
struct xfs_owner_info oinfo;
ASSERT(!test_bit(XFS_EFI_RECOVERED, &efip->efi_flags));
/*
* First check the validity of the extents described by the
* EFI. If any are bad, then assume that all are bad and
* just toss the EFI.
*/
for (i = 0; i < efip->efi_format.efi_nextents; i++) {
extp = &efip->efi_format.efi_extents[i];
startblock_fsb = XFS_BB_TO_FSB(mp,
XFS_FSB_TO_DADDR(mp, extp->ext_start));
if (startblock_fsb == 0 ||
extp->ext_len == 0 ||
startblock_fsb >= mp->m_sb.sb_dblocks ||
extp->ext_len >= mp->m_sb.sb_agblocks) {
/*
* This will pull the EFI from the AIL and
* free the memory associated with it.
*/
set_bit(XFS_EFI_RECOVERED, &efip->efi_flags);
xfs_efi_release(efip);
return -EIO;
}
}
error = xfs_trans_alloc(mp, &M_RES(mp)->tr_itruncate, 0, 0, 0, &tp);
if (error)
return error;
efdp = xfs_trans_get_efd(tp, efip, efip->efi_format.efi_nextents);
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
xfs_rmap_skip_owner_update(&oinfo);
for (i = 0; i < efip->efi_format.efi_nextents; i++) {
extp = &efip->efi_format.efi_extents[i];
error = xfs_trans_free_extent(tp, efdp, extp->ext_start,
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
extp->ext_len, &oinfo);
if (error)
goto abort_error;
}
set_bit(XFS_EFI_RECOVERED, &efip->efi_flags);
error = xfs_trans_commit(tp);
return error;
abort_error:
xfs_trans_cancel(tp);
return error;
}