linux/drivers/gpu/drm/exynos/exynos_drm_g2d.c

1554 lines
36 KiB
C
Raw Normal View History

drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
/*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* Authors: Joonyoung Shim <jy0922.shim@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundationr
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/dma-mapping.h>
#include <linux/dma-attrs.h>
#include <linux/of.h>
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#include <drm/drmP.h>
#include <drm/exynos_drm.h>
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#include "exynos_drm_drv.h"
#include "exynos_drm_g2d.h"
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#include "exynos_drm_gem.h"
#include "exynos_drm_iommu.h"
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#define G2D_HW_MAJOR_VER 4
#define G2D_HW_MINOR_VER 1
/* vaild register range set from user: 0x0104 ~ 0x0880 */
#define G2D_VALID_START 0x0104
#define G2D_VALID_END 0x0880
/* general registers */
#define G2D_SOFT_RESET 0x0000
#define G2D_INTEN 0x0004
#define G2D_INTC_PEND 0x000C
#define G2D_DMA_SFR_BASE_ADDR 0x0080
#define G2D_DMA_COMMAND 0x0084
#define G2D_DMA_STATUS 0x008C
#define G2D_DMA_HOLD_CMD 0x0090
/* command registers */
#define G2D_BITBLT_START 0x0100
/* registers for base address */
#define G2D_SRC_BASE_ADDR 0x0304
#define G2D_SRC_COLOR_MODE 0x030C
#define G2D_SRC_LEFT_TOP 0x0310
#define G2D_SRC_RIGHT_BOTTOM 0x0314
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#define G2D_SRC_PLANE2_BASE_ADDR 0x0318
#define G2D_DST_BASE_ADDR 0x0404
#define G2D_DST_COLOR_MODE 0x040C
#define G2D_DST_LEFT_TOP 0x0410
#define G2D_DST_RIGHT_BOTTOM 0x0414
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#define G2D_DST_PLANE2_BASE_ADDR 0x0418
#define G2D_PAT_BASE_ADDR 0x0500
#define G2D_MSK_BASE_ADDR 0x0520
/* G2D_SOFT_RESET */
#define G2D_SFRCLEAR (1 << 1)
#define G2D_R (1 << 0)
/* G2D_INTEN */
#define G2D_INTEN_ACF (1 << 3)
#define G2D_INTEN_UCF (1 << 2)
#define G2D_INTEN_GCF (1 << 1)
#define G2D_INTEN_SCF (1 << 0)
/* G2D_INTC_PEND */
#define G2D_INTP_ACMD_FIN (1 << 3)
#define G2D_INTP_UCMD_FIN (1 << 2)
#define G2D_INTP_GCMD_FIN (1 << 1)
#define G2D_INTP_SCMD_FIN (1 << 0)
/* G2D_DMA_COMMAND */
#define G2D_DMA_HALT (1 << 2)
#define G2D_DMA_CONTINUE (1 << 1)
#define G2D_DMA_START (1 << 0)
/* G2D_DMA_STATUS */
#define G2D_DMA_LIST_DONE_COUNT (0xFF << 17)
#define G2D_DMA_BITBLT_DONE_COUNT (0xFFFF << 1)
#define G2D_DMA_DONE (1 << 0)
#define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
/* G2D_DMA_HOLD_CMD */
#define G2D_USER_HOLD (1 << 2)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#define G2D_LIST_HOLD (1 << 1)
#define G2D_BITBLT_HOLD (1 << 0)
/* G2D_BITBLT_START */
#define G2D_START_CASESEL (1 << 2)
#define G2D_START_NHOLT (1 << 1)
#define G2D_START_BITBLT (1 << 0)
/* buffer color format */
#define G2D_FMT_XRGB8888 0
#define G2D_FMT_ARGB8888 1
#define G2D_FMT_RGB565 2
#define G2D_FMT_XRGB1555 3
#define G2D_FMT_ARGB1555 4
#define G2D_FMT_XRGB4444 5
#define G2D_FMT_ARGB4444 6
#define G2D_FMT_PACKED_RGB888 7
#define G2D_FMT_A8 11
#define G2D_FMT_L8 12
/* buffer valid length */
#define G2D_LEN_MIN 1
#define G2D_LEN_MAX 8000
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
#define G2D_CMDLIST_SIZE (PAGE_SIZE / 4)
#define G2D_CMDLIST_NUM 64
#define G2D_CMDLIST_POOL_SIZE (G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM)
#define G2D_CMDLIST_DATA_NUM (G2D_CMDLIST_SIZE / sizeof(u32) - 2)
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
/* maximum buffer pool size of userptr is 64MB as default */
#define MAX_POOL (64 * 1024 * 1024)
enum {
BUF_TYPE_GEM = 1,
BUF_TYPE_USERPTR,
};
enum g2d_reg_type {
REG_TYPE_NONE = -1,
REG_TYPE_SRC,
REG_TYPE_SRC_PLANE2,
REG_TYPE_DST,
REG_TYPE_DST_PLANE2,
REG_TYPE_PAT,
REG_TYPE_MSK,
MAX_REG_TYPE_NR
};
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
/* cmdlist data structure */
struct g2d_cmdlist {
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
u32 head;
unsigned long data[G2D_CMDLIST_DATA_NUM];
u32 last; /* last data offset */
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
};
/*
* A structure of buffer description
*
* @format: color format
* @left_x: the x coordinates of left top corner
* @top_y: the y coordinates of left top corner
* @right_x: the x coordinates of right bottom corner
* @bottom_y: the y coordinates of right bottom corner
*
*/
struct g2d_buf_desc {
unsigned int format;
unsigned int left_x;
unsigned int top_y;
unsigned int right_x;
unsigned int bottom_y;
};
/*
* A structure of buffer information
*
* @map_nr: manages the number of mapped buffers
* @reg_types: stores regitster type in the order of requested command
* @handles: stores buffer handle in its reg_type position
* @types: stores buffer type in its reg_type position
* @descs: stores buffer description in its reg_type position
*
*/
struct g2d_buf_info {
unsigned int map_nr;
enum g2d_reg_type reg_types[MAX_REG_TYPE_NR];
unsigned long handles[MAX_REG_TYPE_NR];
unsigned int types[MAX_REG_TYPE_NR];
struct g2d_buf_desc descs[MAX_REG_TYPE_NR];
};
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
struct drm_exynos_pending_g2d_event {
struct drm_pending_event base;
struct drm_exynos_g2d_event event;
};
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
struct g2d_cmdlist_userptr {
struct list_head list;
dma_addr_t dma_addr;
unsigned long userptr;
unsigned long size;
struct page **pages;
unsigned int npages;
struct sg_table *sgt;
struct vm_area_struct *vma;
atomic_t refcount;
bool in_pool;
bool out_of_list;
};
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
struct g2d_cmdlist_node {
struct list_head list;
struct g2d_cmdlist *cmdlist;
dma_addr_t dma_addr;
struct g2d_buf_info buf_info;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
struct drm_exynos_pending_g2d_event *event;
};
struct g2d_runqueue_node {
struct list_head list;
struct list_head run_cmdlist;
struct list_head event_list;
struct drm_file *filp;
pid_t pid;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
struct completion complete;
int async;
};
struct g2d_data {
struct device *dev;
struct clk *gate_clk;
void __iomem *regs;
int irq;
struct workqueue_struct *g2d_workq;
struct work_struct runqueue_work;
struct exynos_drm_subdrv subdrv;
bool suspended;
/* cmdlist */
struct g2d_cmdlist_node *cmdlist_node;
struct list_head free_cmdlist;
struct mutex cmdlist_mutex;
dma_addr_t cmdlist_pool;
void *cmdlist_pool_virt;
struct dma_attrs cmdlist_dma_attrs;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
/* runqueue*/
struct g2d_runqueue_node *runqueue_node;
struct list_head runqueue;
struct mutex runqueue_mutex;
struct kmem_cache *runqueue_slab;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
unsigned long current_pool;
unsigned long max_pool;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
};
static int g2d_init_cmdlist(struct g2d_data *g2d)
{
struct device *dev = g2d->dev;
struct g2d_cmdlist_node *node = g2d->cmdlist_node;
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
int nr;
int ret;
struct g2d_buf_info *buf_info;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
init_dma_attrs(&g2d->cmdlist_dma_attrs);
dma_set_attr(DMA_ATTR_WRITE_COMBINE, &g2d->cmdlist_dma_attrs);
g2d->cmdlist_pool_virt = dma_alloc_attrs(subdrv->drm_dev->dev,
G2D_CMDLIST_POOL_SIZE,
&g2d->cmdlist_pool, GFP_KERNEL,
&g2d->cmdlist_dma_attrs);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (!g2d->cmdlist_pool_virt) {
dev_err(dev, "failed to allocate dma memory\n");
return -ENOMEM;
}
node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (!node) {
dev_err(dev, "failed to allocate memory\n");
ret = -ENOMEM;
goto err;
}
for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) {
unsigned int i;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
node[nr].cmdlist =
g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE;
node[nr].dma_addr =
g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE;
buf_info = &node[nr].buf_info;
for (i = 0; i < MAX_REG_TYPE_NR; i++)
buf_info->reg_types[i] = REG_TYPE_NONE;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
list_add_tail(&node[nr].list, &g2d->free_cmdlist);
}
return 0;
err:
dma_free_attrs(subdrv->drm_dev->dev, G2D_CMDLIST_POOL_SIZE,
g2d->cmdlist_pool_virt,
g2d->cmdlist_pool, &g2d->cmdlist_dma_attrs);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
return ret;
}
static void g2d_fini_cmdlist(struct g2d_data *g2d)
{
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
kfree(g2d->cmdlist_node);
dma_free_attrs(subdrv->drm_dev->dev, G2D_CMDLIST_POOL_SIZE,
g2d->cmdlist_pool_virt,
g2d->cmdlist_pool, &g2d->cmdlist_dma_attrs);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
static struct g2d_cmdlist_node *g2d_get_cmdlist(struct g2d_data *g2d)
{
struct device *dev = g2d->dev;
struct g2d_cmdlist_node *node;
mutex_lock(&g2d->cmdlist_mutex);
if (list_empty(&g2d->free_cmdlist)) {
dev_err(dev, "there is no free cmdlist\n");
mutex_unlock(&g2d->cmdlist_mutex);
return NULL;
}
node = list_first_entry(&g2d->free_cmdlist, struct g2d_cmdlist_node,
list);
list_del_init(&node->list);
mutex_unlock(&g2d->cmdlist_mutex);
return node;
}
static void g2d_put_cmdlist(struct g2d_data *g2d, struct g2d_cmdlist_node *node)
{
mutex_lock(&g2d->cmdlist_mutex);
list_move_tail(&node->list, &g2d->free_cmdlist);
mutex_unlock(&g2d->cmdlist_mutex);
}
static void g2d_add_cmdlist_to_inuse(struct exynos_drm_g2d_private *g2d_priv,
struct g2d_cmdlist_node *node)
{
struct g2d_cmdlist_node *lnode;
if (list_empty(&g2d_priv->inuse_cmdlist))
goto add_to_list;
/* this links to base address of new cmdlist */
lnode = list_entry(g2d_priv->inuse_cmdlist.prev,
struct g2d_cmdlist_node, list);
lnode->cmdlist->data[lnode->cmdlist->last] = node->dma_addr;
add_to_list:
list_add_tail(&node->list, &g2d_priv->inuse_cmdlist);
if (node->event)
list_add_tail(&node->event->base.link, &g2d_priv->event_list);
}
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
static void g2d_userptr_put_dma_addr(struct drm_device *drm_dev,
unsigned long obj,
bool force)
{
struct g2d_cmdlist_userptr *g2d_userptr =
(struct g2d_cmdlist_userptr *)obj;
if (!obj)
return;
if (force)
goto out;
atomic_dec(&g2d_userptr->refcount);
if (atomic_read(&g2d_userptr->refcount) > 0)
return;
if (g2d_userptr->in_pool)
return;
out:
exynos_gem_unmap_sgt_from_dma(drm_dev, g2d_userptr->sgt,
DMA_BIDIRECTIONAL);
exynos_gem_put_pages_to_userptr(g2d_userptr->pages,
g2d_userptr->npages,
g2d_userptr->vma);
exynos_gem_put_vma(g2d_userptr->vma);
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
if (!g2d_userptr->out_of_list)
list_del_init(&g2d_userptr->list);
sg_free_table(g2d_userptr->sgt);
kfree(g2d_userptr->sgt);
drm_free_large(g2d_userptr->pages);
kfree(g2d_userptr);
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
}
static dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev,
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
unsigned long userptr,
unsigned long size,
struct drm_file *filp,
unsigned long *obj)
{
struct drm_exynos_file_private *file_priv = filp->driver_priv;
struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
struct g2d_cmdlist_userptr *g2d_userptr;
struct g2d_data *g2d;
struct page **pages;
struct sg_table *sgt;
struct vm_area_struct *vma;
unsigned long start, end;
unsigned int npages, offset;
int ret;
if (!size) {
DRM_ERROR("invalid userptr size.\n");
return ERR_PTR(-EINVAL);
}
g2d = dev_get_drvdata(g2d_priv->dev);
/* check if userptr already exists in userptr_list. */
list_for_each_entry(g2d_userptr, &g2d_priv->userptr_list, list) {
if (g2d_userptr->userptr == userptr) {
/*
* also check size because there could be same address
* and different size.
*/
if (g2d_userptr->size == size) {
atomic_inc(&g2d_userptr->refcount);
*obj = (unsigned long)g2d_userptr;
return &g2d_userptr->dma_addr;
}
/*
* at this moment, maybe g2d dma is accessing this
* g2d_userptr memory region so just remove this
* g2d_userptr object from userptr_list not to be
* referred again and also except it the userptr
* pool to be released after the dma access completion.
*/
g2d_userptr->out_of_list = true;
g2d_userptr->in_pool = false;
list_del_init(&g2d_userptr->list);
break;
}
}
g2d_userptr = kzalloc(sizeof(*g2d_userptr), GFP_KERNEL);
if (!g2d_userptr)
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
return ERR_PTR(-ENOMEM);
atomic_set(&g2d_userptr->refcount, 1);
start = userptr & PAGE_MASK;
offset = userptr & ~PAGE_MASK;
end = PAGE_ALIGN(userptr + size);
npages = (end - start) >> PAGE_SHIFT;
g2d_userptr->npages = npages;
pages = drm_calloc_large(npages, sizeof(struct page *));
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
if (!pages) {
DRM_ERROR("failed to allocate pages.\n");
ret = -ENOMEM;
goto err_free;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
}
vma = find_vma(current->mm, userptr);
if (!vma) {
DRM_ERROR("failed to get vm region.\n");
ret = -EFAULT;
goto err_free_pages;
}
if (vma->vm_end < userptr + size) {
DRM_ERROR("vma is too small.\n");
ret = -EFAULT;
goto err_free_pages;
}
g2d_userptr->vma = exynos_gem_get_vma(vma);
if (!g2d_userptr->vma) {
DRM_ERROR("failed to copy vma.\n");
ret = -ENOMEM;
goto err_free_pages;
}
g2d_userptr->size = size;
ret = exynos_gem_get_pages_from_userptr(start & PAGE_MASK,
npages, pages, vma);
if (ret < 0) {
DRM_ERROR("failed to get user pages from userptr.\n");
goto err_put_vma;
}
g2d_userptr->pages = pages;
sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
if (!sgt) {
ret = -ENOMEM;
goto err_free_userptr;
}
ret = sg_alloc_table_from_pages(sgt, pages, npages, offset,
size, GFP_KERNEL);
if (ret < 0) {
DRM_ERROR("failed to get sgt from pages.\n");
goto err_free_sgt;
}
g2d_userptr->sgt = sgt;
ret = exynos_gem_map_sgt_with_dma(drm_dev, g2d_userptr->sgt,
DMA_BIDIRECTIONAL);
if (ret < 0) {
DRM_ERROR("failed to map sgt with dma region.\n");
goto err_sg_free_table;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
}
g2d_userptr->dma_addr = sgt->sgl[0].dma_address;
g2d_userptr->userptr = userptr;
list_add_tail(&g2d_userptr->list, &g2d_priv->userptr_list);
if (g2d->current_pool + (npages << PAGE_SHIFT) < g2d->max_pool) {
g2d->current_pool += npages << PAGE_SHIFT;
g2d_userptr->in_pool = true;
}
*obj = (unsigned long)g2d_userptr;
return &g2d_userptr->dma_addr;
err_sg_free_table:
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
sg_free_table(sgt);
err_free_sgt:
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
kfree(sgt);
err_free_userptr:
exynos_gem_put_pages_to_userptr(g2d_userptr->pages,
g2d_userptr->npages,
g2d_userptr->vma);
err_put_vma:
exynos_gem_put_vma(g2d_userptr->vma);
err_free_pages:
drm_free_large(pages);
err_free:
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
kfree(g2d_userptr);
return ERR_PTR(ret);
}
static void g2d_userptr_free_all(struct drm_device *drm_dev,
struct g2d_data *g2d,
struct drm_file *filp)
{
struct drm_exynos_file_private *file_priv = filp->driver_priv;
struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
struct g2d_cmdlist_userptr *g2d_userptr, *n;
list_for_each_entry_safe(g2d_userptr, n, &g2d_priv->userptr_list, list)
if (g2d_userptr->in_pool)
g2d_userptr_put_dma_addr(drm_dev,
(unsigned long)g2d_userptr,
true);
g2d->current_pool = 0;
}
static enum g2d_reg_type g2d_get_reg_type(int reg_offset)
{
enum g2d_reg_type reg_type;
switch (reg_offset) {
case G2D_SRC_BASE_ADDR:
case G2D_SRC_COLOR_MODE:
case G2D_SRC_LEFT_TOP:
case G2D_SRC_RIGHT_BOTTOM:
reg_type = REG_TYPE_SRC;
break;
case G2D_SRC_PLANE2_BASE_ADDR:
reg_type = REG_TYPE_SRC_PLANE2;
break;
case G2D_DST_BASE_ADDR:
case G2D_DST_COLOR_MODE:
case G2D_DST_LEFT_TOP:
case G2D_DST_RIGHT_BOTTOM:
reg_type = REG_TYPE_DST;
break;
case G2D_DST_PLANE2_BASE_ADDR:
reg_type = REG_TYPE_DST_PLANE2;
break;
case G2D_PAT_BASE_ADDR:
reg_type = REG_TYPE_PAT;
break;
case G2D_MSK_BASE_ADDR:
reg_type = REG_TYPE_MSK;
break;
default:
reg_type = REG_TYPE_NONE;
DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
break;
};
return reg_type;
}
static unsigned long g2d_get_buf_bpp(unsigned int format)
{
unsigned long bpp;
switch (format) {
case G2D_FMT_XRGB8888:
case G2D_FMT_ARGB8888:
bpp = 4;
break;
case G2D_FMT_RGB565:
case G2D_FMT_XRGB1555:
case G2D_FMT_ARGB1555:
case G2D_FMT_XRGB4444:
case G2D_FMT_ARGB4444:
bpp = 2;
break;
case G2D_FMT_PACKED_RGB888:
bpp = 3;
break;
default:
bpp = 1;
break;
}
return bpp;
}
static bool g2d_check_buf_desc_is_valid(struct g2d_buf_desc *buf_desc,
enum g2d_reg_type reg_type,
unsigned long size)
{
unsigned int width, height;
unsigned long area;
/*
* check source and destination buffers only.
* so the others are always valid.
*/
if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
return true;
width = buf_desc->right_x - buf_desc->left_x;
if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
DRM_ERROR("width[%u] is out of range!\n", width);
return false;
}
height = buf_desc->bottom_y - buf_desc->top_y;
if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
DRM_ERROR("height[%u] is out of range!\n", height);
return false;
}
area = (unsigned long)width * (unsigned long)height *
g2d_get_buf_bpp(buf_desc->format);
if (area > size) {
DRM_ERROR("area[%lu] is out of range[%lu]!\n", area, size);
return false;
}
return true;
}
static int g2d_map_cmdlist_gem(struct g2d_data *g2d,
struct g2d_cmdlist_node *node,
struct drm_device *drm_dev,
struct drm_file *file)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
{
struct g2d_cmdlist *cmdlist = node->cmdlist;
struct g2d_buf_info *buf_info = &node->buf_info;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
int offset;
int ret;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
int i;
for (i = 0; i < buf_info->map_nr; i++) {
struct g2d_buf_desc *buf_desc;
enum g2d_reg_type reg_type;
int reg_pos;
unsigned long handle;
dma_addr_t *addr;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
reg_pos = cmdlist->last - 2 * (i + 1);
offset = cmdlist->data[reg_pos];
handle = cmdlist->data[reg_pos + 1];
reg_type = g2d_get_reg_type(offset);
if (reg_type == REG_TYPE_NONE) {
ret = -EFAULT;
goto err;
}
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
buf_desc = &buf_info->descs[reg_type];
if (buf_info->types[reg_type] == BUF_TYPE_GEM) {
unsigned long size;
size = exynos_drm_gem_get_size(drm_dev, handle, file);
if (!size) {
ret = -EFAULT;
goto err;
}
if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
size)) {
ret = -EFAULT;
goto err;
}
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
addr = exynos_drm_gem_get_dma_addr(drm_dev, handle,
file);
if (IS_ERR(addr)) {
ret = -EFAULT;
goto err;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
}
} else {
struct drm_exynos_g2d_userptr g2d_userptr;
if (copy_from_user(&g2d_userptr, (void __user *)handle,
sizeof(struct drm_exynos_g2d_userptr))) {
ret = -EFAULT;
goto err;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
}
if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
g2d_userptr.size)) {
ret = -EFAULT;
goto err;
}
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
addr = g2d_userptr_get_dma_addr(drm_dev,
g2d_userptr.userptr,
g2d_userptr.size,
file,
&handle);
if (IS_ERR(addr)) {
ret = -EFAULT;
goto err;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
}
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
cmdlist->data[reg_pos + 1] = *addr;
buf_info->reg_types[i] = reg_type;
buf_info->handles[reg_type] = handle;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
return 0;
err:
buf_info->map_nr = i;
return ret;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d,
struct g2d_cmdlist_node *node,
struct drm_file *filp)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
{
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
struct g2d_buf_info *buf_info = &node->buf_info;
int i;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
for (i = 0; i < buf_info->map_nr; i++) {
struct g2d_buf_desc *buf_desc;
enum g2d_reg_type reg_type;
unsigned long handle;
reg_type = buf_info->reg_types[i];
buf_desc = &buf_info->descs[reg_type];
handle = buf_info->handles[reg_type];
if (buf_info->types[reg_type] == BUF_TYPE_GEM)
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
exynos_drm_gem_put_dma_addr(subdrv->drm_dev, handle,
filp);
else
g2d_userptr_put_dma_addr(subdrv->drm_dev, handle,
false);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
buf_info->reg_types[i] = REG_TYPE_NONE;
buf_info->handles[reg_type] = 0;
buf_info->types[reg_type] = 0;
memset(buf_desc, 0x00, sizeof(*buf_desc));
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
buf_info->map_nr = 0;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
static void g2d_dma_start(struct g2d_data *g2d,
struct g2d_runqueue_node *runqueue_node)
{
struct g2d_cmdlist_node *node =
list_first_entry(&runqueue_node->run_cmdlist,
struct g2d_cmdlist_node, list);
int ret;
ret = pm_runtime_get_sync(g2d->dev);
if (ret < 0)
return;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
}
static struct g2d_runqueue_node *g2d_get_runqueue_node(struct g2d_data *g2d)
{
struct g2d_runqueue_node *runqueue_node;
if (list_empty(&g2d->runqueue))
return NULL;
runqueue_node = list_first_entry(&g2d->runqueue,
struct g2d_runqueue_node, list);
list_del_init(&runqueue_node->list);
return runqueue_node;
}
static void g2d_free_runqueue_node(struct g2d_data *g2d,
struct g2d_runqueue_node *runqueue_node)
{
struct g2d_cmdlist_node *node;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (!runqueue_node)
return;
mutex_lock(&g2d->cmdlist_mutex);
/*
* commands in run_cmdlist have been completed so unmap all gem
* objects in each command node so that they are unreferenced.
*/
list_for_each_entry(node, &runqueue_node->run_cmdlist, list)
g2d_unmap_cmdlist_gem(g2d, node, runqueue_node->filp);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
list_splice_tail_init(&runqueue_node->run_cmdlist, &g2d->free_cmdlist);
mutex_unlock(&g2d->cmdlist_mutex);
kmem_cache_free(g2d->runqueue_slab, runqueue_node);
}
static void g2d_exec_runqueue(struct g2d_data *g2d)
{
g2d->runqueue_node = g2d_get_runqueue_node(g2d);
if (g2d->runqueue_node)
g2d_dma_start(g2d, g2d->runqueue_node);
}
static void g2d_runqueue_worker(struct work_struct *work)
{
struct g2d_data *g2d = container_of(work, struct g2d_data,
runqueue_work);
mutex_lock(&g2d->runqueue_mutex);
pm_runtime_put_sync(g2d->dev);
complete(&g2d->runqueue_node->complete);
if (g2d->runqueue_node->async)
g2d_free_runqueue_node(g2d, g2d->runqueue_node);
if (g2d->suspended)
g2d->runqueue_node = NULL;
else
g2d_exec_runqueue(g2d);
mutex_unlock(&g2d->runqueue_mutex);
}
static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no)
{
struct drm_device *drm_dev = g2d->subdrv.drm_dev;
struct g2d_runqueue_node *runqueue_node = g2d->runqueue_node;
struct drm_exynos_pending_g2d_event *e;
struct timeval now;
unsigned long flags;
if (list_empty(&runqueue_node->event_list))
return;
e = list_first_entry(&runqueue_node->event_list,
struct drm_exynos_pending_g2d_event, base.link);
do_gettimeofday(&now);
e->event.tv_sec = now.tv_sec;
e->event.tv_usec = now.tv_usec;
e->event.cmdlist_no = cmdlist_no;
spin_lock_irqsave(&drm_dev->event_lock, flags);
list_move_tail(&e->base.link, &e->base.file_priv->event_list);
wake_up_interruptible(&e->base.file_priv->event_wait);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
}
static irqreturn_t g2d_irq_handler(int irq, void *dev_id)
{
struct g2d_data *g2d = dev_id;
u32 pending;
pending = readl_relaxed(g2d->regs + G2D_INTC_PEND);
if (pending)
writel_relaxed(pending, g2d->regs + G2D_INTC_PEND);
if (pending & G2D_INTP_GCMD_FIN) {
u32 cmdlist_no = readl_relaxed(g2d->regs + G2D_DMA_STATUS);
cmdlist_no = (cmdlist_no & G2D_DMA_LIST_DONE_COUNT) >>
G2D_DMA_LIST_DONE_COUNT_OFFSET;
g2d_finish_event(g2d, cmdlist_no);
writel_relaxed(0, g2d->regs + G2D_DMA_HOLD_CMD);
if (!(pending & G2D_INTP_ACMD_FIN)) {
writel_relaxed(G2D_DMA_CONTINUE,
g2d->regs + G2D_DMA_COMMAND);
}
}
if (pending & G2D_INTP_ACMD_FIN)
queue_work(g2d->g2d_workq, &g2d->runqueue_work);
return IRQ_HANDLED;
}
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
static int g2d_check_reg_offset(struct device *dev,
struct g2d_cmdlist_node *node,
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
int nr, bool for_addr)
{
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
struct g2d_cmdlist *cmdlist = node->cmdlist;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
int reg_offset;
int index;
int i;
for (i = 0; i < nr; i++) {
struct g2d_buf_info *buf_info = &node->buf_info;
struct g2d_buf_desc *buf_desc;
enum g2d_reg_type reg_type;
unsigned long value;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
index = cmdlist->last - 2 * (i + 1);
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
reg_offset = cmdlist->data[index] & ~0xfffff000;
if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END)
goto err;
if (reg_offset % 4)
goto err;
switch (reg_offset) {
case G2D_SRC_BASE_ADDR:
case G2D_SRC_PLANE2_BASE_ADDR:
case G2D_DST_BASE_ADDR:
case G2D_DST_PLANE2_BASE_ADDR:
case G2D_PAT_BASE_ADDR:
case G2D_MSK_BASE_ADDR:
if (!for_addr)
goto err;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
reg_type = g2d_get_reg_type(reg_offset);
if (reg_type == REG_TYPE_NONE)
goto err;
/* check userptr buffer type. */
if ((cmdlist->data[index] & ~0x7fffffff) >> 31) {
buf_info->types[reg_type] = BUF_TYPE_USERPTR;
cmdlist->data[index] &= ~G2D_BUF_USERPTR;
} else
buf_info->types[reg_type] = BUF_TYPE_GEM;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
break;
case G2D_SRC_COLOR_MODE:
case G2D_DST_COLOR_MODE:
if (for_addr)
goto err;
reg_type = g2d_get_reg_type(reg_offset);
if (reg_type == REG_TYPE_NONE)
goto err;
buf_desc = &buf_info->descs[reg_type];
value = cmdlist->data[index + 1];
buf_desc->format = value & 0xf;
break;
case G2D_SRC_LEFT_TOP:
case G2D_DST_LEFT_TOP:
if (for_addr)
goto err;
reg_type = g2d_get_reg_type(reg_offset);
if (reg_type == REG_TYPE_NONE)
goto err;
buf_desc = &buf_info->descs[reg_type];
value = cmdlist->data[index + 1];
buf_desc->left_x = value & 0x1fff;
buf_desc->top_y = (value & 0x1fff0000) >> 16;
break;
case G2D_SRC_RIGHT_BOTTOM:
case G2D_DST_RIGHT_BOTTOM:
if (for_addr)
goto err;
reg_type = g2d_get_reg_type(reg_offset);
if (reg_type == REG_TYPE_NONE)
goto err;
buf_desc = &buf_info->descs[reg_type];
value = cmdlist->data[index + 1];
buf_desc->right_x = value & 0x1fff;
buf_desc->bottom_y = (value & 0x1fff0000) >> 16;
break;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
default:
if (for_addr)
goto err;
break;
}
}
return 0;
err:
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
dev_err(dev, "Bad register offset: 0x%lx\n", cmdlist->data[index]);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
return -EINVAL;
}
/* ioctl functions */
int exynos_g2d_get_ver_ioctl(struct drm_device *drm_dev, void *data,
struct drm_file *file)
{
struct drm_exynos_g2d_get_ver *ver = data;
ver->major = G2D_HW_MAJOR_VER;
ver->minor = G2D_HW_MINOR_VER;
return 0;
}
EXPORT_SYMBOL_GPL(exynos_g2d_get_ver_ioctl);
int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data,
struct drm_file *file)
{
struct drm_exynos_file_private *file_priv = file->driver_priv;
struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
struct device *dev = g2d_priv->dev;
struct g2d_data *g2d;
struct drm_exynos_g2d_set_cmdlist *req = data;
struct drm_exynos_g2d_cmd *cmd;
struct drm_exynos_pending_g2d_event *e;
struct g2d_cmdlist_node *node;
struct g2d_cmdlist *cmdlist;
unsigned long flags;
int size;
int ret;
if (!dev)
return -ENODEV;
g2d = dev_get_drvdata(dev);
if (!g2d)
return -EFAULT;
node = g2d_get_cmdlist(g2d);
if (!node)
return -ENOMEM;
node->event = NULL;
if (req->event_type != G2D_EVENT_NOT) {
spin_lock_irqsave(&drm_dev->event_lock, flags);
if (file->event_space < sizeof(e->event)) {
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
ret = -ENOMEM;
goto err;
}
file->event_space -= sizeof(e->event);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
e = kzalloc(sizeof(*node->event), GFP_KERNEL);
if (!e) {
spin_lock_irqsave(&drm_dev->event_lock, flags);
file->event_space += sizeof(e->event);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
ret = -ENOMEM;
goto err;
}
e->event.base.type = DRM_EXYNOS_G2D_EVENT;
e->event.base.length = sizeof(e->event);
e->event.user_data = req->user_data;
e->base.event = &e->event.base;
e->base.file_priv = file;
e->base.destroy = (void (*) (struct drm_pending_event *)) kfree;
node->event = e;
}
cmdlist = node->cmdlist;
cmdlist->last = 0;
/*
* If don't clear SFR registers, the cmdlist is affected by register
* values of previous cmdlist. G2D hw executes SFR clear command and
* a next command at the same time then the next command is ignored and
* is executed rightly from next next command, so needs a dummy command
* to next command of SFR clear command.
*/
cmdlist->data[cmdlist->last++] = G2D_SOFT_RESET;
cmdlist->data[cmdlist->last++] = G2D_SFRCLEAR;
cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
cmdlist->data[cmdlist->last++] = 0;
/*
* 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
* and GCF bit should be set to INTEN register if user wants
* G2D interrupt event once current command list execution is
* finished.
* Otherwise only ACF bit should be set to INTEN register so
* that one interrupt is occured after all command lists
* have been completed.
*/
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (node->event) {
cmdlist->data[cmdlist->last++] = G2D_INTEN;
cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
} else {
cmdlist->data[cmdlist->last++] = G2D_INTEN;
cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
/* Check size of cmdlist: last 2 is about G2D_BITBLT_START */
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
size = cmdlist->last + req->cmd_nr * 2 + req->cmd_buf_nr * 2 + 2;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (size > G2D_CMDLIST_DATA_NUM) {
dev_err(dev, "cmdlist size is too big\n");
ret = -EINVAL;
goto err_free_event;
}
cmd = (struct drm_exynos_g2d_cmd *)(uint32_t)req->cmd;
if (copy_from_user(cmdlist->data + cmdlist->last,
(void __user *)cmd,
sizeof(*cmd) * req->cmd_nr)) {
ret = -EFAULT;
goto err_free_event;
}
cmdlist->last += req->cmd_nr * 2;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
ret = g2d_check_reg_offset(dev, node, req->cmd_nr, false);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (ret < 0)
goto err_free_event;
node->buf_info.map_nr = req->cmd_buf_nr;
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
if (req->cmd_buf_nr) {
struct drm_exynos_g2d_cmd *cmd_buf;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
cmd_buf = (struct drm_exynos_g2d_cmd *)(uint32_t)req->cmd_buf;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (copy_from_user(cmdlist->data + cmdlist->last,
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
(void __user *)cmd_buf,
sizeof(*cmd_buf) * req->cmd_buf_nr)) {
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
ret = -EFAULT;
goto err_free_event;
}
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
cmdlist->last += req->cmd_buf_nr * 2;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
ret = g2d_check_reg_offset(dev, node, req->cmd_buf_nr, true);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (ret < 0)
goto err_free_event;
ret = g2d_map_cmdlist_gem(g2d, node, drm_dev, file);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (ret < 0)
goto err_unmap;
}
cmdlist->data[cmdlist->last++] = G2D_BITBLT_START;
cmdlist->data[cmdlist->last++] = G2D_START_BITBLT;
/* head */
cmdlist->head = cmdlist->last / 2;
/* tail */
cmdlist->data[cmdlist->last] = 0;
g2d_add_cmdlist_to_inuse(g2d_priv, node);
return 0;
err_unmap:
g2d_unmap_cmdlist_gem(g2d, node, file);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
err_free_event:
if (node->event) {
spin_lock_irqsave(&drm_dev->event_lock, flags);
file->event_space += sizeof(e->event);
spin_unlock_irqrestore(&drm_dev->event_lock, flags);
kfree(node->event);
}
err:
g2d_put_cmdlist(g2d, node);
return ret;
}
EXPORT_SYMBOL_GPL(exynos_g2d_set_cmdlist_ioctl);
int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data,
struct drm_file *file)
{
struct drm_exynos_file_private *file_priv = file->driver_priv;
struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
struct device *dev = g2d_priv->dev;
struct g2d_data *g2d;
struct drm_exynos_g2d_exec *req = data;
struct g2d_runqueue_node *runqueue_node;
struct list_head *run_cmdlist;
struct list_head *event_list;
if (!dev)
return -ENODEV;
g2d = dev_get_drvdata(dev);
if (!g2d)
return -EFAULT;
runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL);
if (!runqueue_node) {
dev_err(dev, "failed to allocate memory\n");
return -ENOMEM;
}
run_cmdlist = &runqueue_node->run_cmdlist;
event_list = &runqueue_node->event_list;
INIT_LIST_HEAD(run_cmdlist);
INIT_LIST_HEAD(event_list);
init_completion(&runqueue_node->complete);
runqueue_node->async = req->async;
list_splice_init(&g2d_priv->inuse_cmdlist, run_cmdlist);
list_splice_init(&g2d_priv->event_list, event_list);
if (list_empty(run_cmdlist)) {
dev_err(dev, "there is no inuse cmdlist\n");
kmem_cache_free(g2d->runqueue_slab, runqueue_node);
return -EPERM;
}
mutex_lock(&g2d->runqueue_mutex);
runqueue_node->pid = current->pid;
runqueue_node->filp = file;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
list_add_tail(&runqueue_node->list, &g2d->runqueue);
if (!g2d->runqueue_node)
g2d_exec_runqueue(g2d);
mutex_unlock(&g2d->runqueue_mutex);
if (runqueue_node->async)
goto out;
wait_for_completion(&runqueue_node->complete);
g2d_free_runqueue_node(g2d, runqueue_node);
out:
return 0;
}
EXPORT_SYMBOL_GPL(exynos_g2d_exec_ioctl);
static int g2d_subdrv_probe(struct drm_device *drm_dev, struct device *dev)
{
struct g2d_data *g2d;
int ret;
g2d = dev_get_drvdata(dev);
if (!g2d)
return -EFAULT;
/* allocate dma-aware cmdlist buffer. */
ret = g2d_init_cmdlist(g2d);
if (ret < 0) {
dev_err(dev, "cmdlist init failed\n");
return ret;
}
if (!is_drm_iommu_supported(drm_dev))
return 0;
ret = drm_iommu_attach_device(drm_dev, dev);
if (ret < 0) {
dev_err(dev, "failed to enable iommu.\n");
g2d_fini_cmdlist(g2d);
}
return ret;
}
static void g2d_subdrv_remove(struct drm_device *drm_dev, struct device *dev)
{
if (!is_drm_iommu_supported(drm_dev))
return;
drm_iommu_detach_device(drm_dev, dev);
}
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
static int g2d_open(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file)
{
struct drm_exynos_file_private *file_priv = file->driver_priv;
struct exynos_drm_g2d_private *g2d_priv;
g2d_priv = kzalloc(sizeof(*g2d_priv), GFP_KERNEL);
if (!g2d_priv)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
return -ENOMEM;
g2d_priv->dev = dev;
file_priv->g2d_priv = g2d_priv;
INIT_LIST_HEAD(&g2d_priv->inuse_cmdlist);
INIT_LIST_HEAD(&g2d_priv->event_list);
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
INIT_LIST_HEAD(&g2d_priv->userptr_list);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
return 0;
}
static void g2d_close(struct drm_device *drm_dev, struct device *dev,
struct drm_file *file)
{
struct drm_exynos_file_private *file_priv = file->driver_priv;
struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
struct g2d_data *g2d;
struct g2d_cmdlist_node *node, *n;
if (!dev)
return;
g2d = dev_get_drvdata(dev);
if (!g2d)
return;
mutex_lock(&g2d->cmdlist_mutex);
list_for_each_entry_safe(node, n, &g2d_priv->inuse_cmdlist, list) {
/*
* unmap all gem objects not completed.
*
* P.S. if current process was terminated forcely then
* there may be some commands in inuse_cmdlist so unmap
* them.
*/
g2d_unmap_cmdlist_gem(g2d, node, file);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
list_move_tail(&node->list, &g2d->free_cmdlist);
}
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
mutex_unlock(&g2d->cmdlist_mutex);
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
/* release all g2d_userptr in pool. */
g2d_userptr_free_all(drm_dev, g2d, file);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
kfree(file_priv->g2d_priv);
}
static int g2d_probe(struct platform_device *pdev)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
{
struct device *dev = &pdev->dev;
struct resource *res;
struct g2d_data *g2d;
struct exynos_drm_subdrv *subdrv;
int ret;
g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL);
if (!g2d)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
return -ENOMEM;
g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab",
sizeof(struct g2d_runqueue_node), 0, 0, NULL);
if (!g2d->runqueue_slab)
return -ENOMEM;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
g2d->dev = dev;
g2d->g2d_workq = create_singlethread_workqueue("g2d");
if (!g2d->g2d_workq) {
dev_err(dev, "failed to create workqueue\n");
ret = -EINVAL;
goto err_destroy_slab;
}
INIT_WORK(&g2d->runqueue_work, g2d_runqueue_worker);
INIT_LIST_HEAD(&g2d->free_cmdlist);
INIT_LIST_HEAD(&g2d->runqueue);
mutex_init(&g2d->cmdlist_mutex);
mutex_init(&g2d->runqueue_mutex);
g2d->gate_clk = devm_clk_get(dev, "fimg2d");
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (IS_ERR(g2d->gate_clk)) {
dev_err(dev, "failed to get gate clock\n");
ret = PTR_ERR(g2d->gate_clk);
goto err_destroy_workqueue;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
pm_runtime_enable(dev);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
g2d->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(g2d->regs)) {
ret = PTR_ERR(g2d->regs);
goto err_put_clk;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
g2d->irq = platform_get_irq(pdev, 0);
if (g2d->irq < 0) {
dev_err(dev, "failed to get irq\n");
ret = g2d->irq;
goto err_put_clk;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0,
"drm_g2d", g2d);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
if (ret < 0) {
dev_err(dev, "irq request failed\n");
goto err_put_clk;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
drm/exynos: add userptr feature for g2d module This patch adds userptr feautre for G2D module. The userptr means user space address allocated by malloc(). And the purpose of this feature is to make G2D's dma able to access the user space region. To user this feature, user should flag G2D_BUF_USRPTR to offset variable of struct drm_exynos_g2d_cmd and fill struct drm_exynos_g2d_userptr with user space address and size for it and then should set a pointer to drm_exynos_g2d_userptr object to data variable of struct drm_exynos_g2d_cmd. The last bit of offset variable is used to check if the cmdlist's buffer type is userptr or not. If userptr, the g2d driver gets user space address and size and then gets pages through get_user_pages(). (another case is counted as gem handle) Below is sample codes: static void set_cmd(struct drm_exynos_g2d_cmd *cmd, unsigned long offset, unsigned long data) { cmd->offset = offset; cmd->data = data; } static int solid_fill_test(int x, int y, unsigned long userptr) { struct drm_exynos_g2d_cmd cmd_gem[5]; struct drm_exynos_g2d_userptr g2d_userptr; unsigned int gem_nr = 0; ... g2d_userptr.userptr = userptr; g2d_userptr.size = x * y * 4; set_cmd(&cmd_gem[gem_nr++], DST_BASE_ADDR_REG | G2D_BUF_USERPTR, (unsigned long)&g2d_userptr); ... } int main(int argc, char **argv) { unsigned long addr; ... addr = malloc(x * y * 4); ... solid_fill_test(x, y, addr); ... } And next, the pages are mapped with iommu table and the device address is set to cmdlist so that G2D's dma can access it. As you may know, the pages from get_user_pages() are pinned. In other words, they CAN NOT be migrated and also swapped out. So the dma access would be safe. But the use of userptr feature has performance overhead so this patch also has memory pool to the userptr feature. Please, assume that user sends cmdlist filled with userptr and size every time to g2d driver, and the get_user_pages funcion will be called every time. The memory pool has maximum 64MB size and the userptr that user had ever sent, is holded in the memory pool. This meaning is that if the userptr from user is same as one in the memory pool, device address to the userptr in the memory pool is set to cmdlist. And last, the pages from get_user_pages() will be freed once user calls free() and the dma access is completed. Actually, get_user_pages() takes 2 reference counts if the user process has never accessed user region allocated by malloc(). Then, if the user calls free(), the page reference count becomes 1 and becomes 0 with put_page() call. And the reverse holds as well. This means how the pages backed are used by dma and freed. This patch is based on "drm/exynos: add iommu support for g2d", https://patchwork.kernel.org/patch/1629481/ Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-11-04 21:48:52 +08:00
g2d->max_pool = MAX_POOL;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
platform_set_drvdata(pdev, g2d);
subdrv = &g2d->subdrv;
subdrv->dev = dev;
subdrv->probe = g2d_subdrv_probe;
subdrv->remove = g2d_subdrv_remove;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
subdrv->open = g2d_open;
subdrv->close = g2d_close;
ret = exynos_drm_subdrv_register(subdrv);
if (ret < 0) {
dev_err(dev, "failed to register drm g2d device\n");
goto err_put_clk;
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
}
dev_info(dev, "The exynos g2d(ver %d.%d) successfully probed\n",
G2D_HW_MAJOR_VER, G2D_HW_MINOR_VER);
return 0;
err_put_clk:
pm_runtime_disable(dev);
err_destroy_workqueue:
destroy_workqueue(g2d->g2d_workq);
err_destroy_slab:
kmem_cache_destroy(g2d->runqueue_slab);
return ret;
}
static int g2d_remove(struct platform_device *pdev)
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
{
struct g2d_data *g2d = platform_get_drvdata(pdev);
cancel_work_sync(&g2d->runqueue_work);
exynos_drm_subdrv_unregister(&g2d->subdrv);
while (g2d->runqueue_node) {
g2d_free_runqueue_node(g2d, g2d->runqueue_node);
g2d->runqueue_node = g2d_get_runqueue_node(g2d);
}
pm_runtime_disable(&pdev->dev);
g2d_fini_cmdlist(g2d);
destroy_workqueue(g2d->g2d_workq);
kmem_cache_destroy(g2d->runqueue_slab);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int g2d_suspend(struct device *dev)
{
struct g2d_data *g2d = dev_get_drvdata(dev);
mutex_lock(&g2d->runqueue_mutex);
g2d->suspended = true;
mutex_unlock(&g2d->runqueue_mutex);
while (g2d->runqueue_node)
/* FIXME: good range? */
usleep_range(500, 1000);
workqueue: deprecate flush[_delayed]_work_sync() flush[_delayed]_work_sync() are now spurious. Mark them deprecated and convert all users to flush[_delayed]_work(). If you're cc'd and wondering what's going on: Now all workqueues are non-reentrant and the regular flushes guarantee that the work item is not pending or running on any CPU on return, so there's no reason to use the sync flushes at all and they're going away. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mattia Dongili <malattia@linux.it> Cc: Kent Yoder <key@linux.vnet.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-wireless@vger.kernel.org Cc: Anton Vorontsov <cbou@mail.ru> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Avi Kivity <avi@redhat.com>
2012-08-21 05:51:24 +08:00
flush_work(&g2d->runqueue_work);
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
return 0;
}
static int g2d_resume(struct device *dev)
{
struct g2d_data *g2d = dev_get_drvdata(dev);
g2d->suspended = false;
g2d_exec_runqueue(g2d);
return 0;
}
#endif
#ifdef CONFIG_PM_RUNTIME
static int g2d_runtime_suspend(struct device *dev)
{
struct g2d_data *g2d = dev_get_drvdata(dev);
clk_disable_unprepare(g2d->gate_clk);
return 0;
}
static int g2d_runtime_resume(struct device *dev)
{
struct g2d_data *g2d = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(g2d->gate_clk);
if (ret < 0)
dev_warn(dev, "failed to enable clock.\n");
return ret;
}
#endif
static const struct dev_pm_ops g2d_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(g2d_suspend, g2d_resume)
SET_RUNTIME_PM_OPS(g2d_runtime_suspend, g2d_runtime_resume, NULL)
};
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
static const struct of_device_id exynos_g2d_match[] = {
{ .compatible = "samsung,exynos5250-g2d" },
{},
};
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
struct platform_driver g2d_driver = {
.probe = g2d_probe,
.remove = g2d_remove,
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
.driver = {
.name = "s5p-g2d",
.owner = THIS_MODULE,
.pm = &g2d_pm_ops,
.of_match_table = exynos_g2d_match,
drm/exynos: add G2D driver Changelog v3: - use __u64 instead of pointer in ioctl struct. The G2D is a 2D graphic accelerator that supports Bit Block Transfer. This G2D driver is exynos drm specific and supports only G2D(version 4.1) of later Exynos series from Exynos4X12 because supporting DMA. The G2D is performed by two tasks simply. 1. Configures the rendering parameters, such as foreground color and coordinates data by setting the drawing context registers. 2. Start the rendering process by setting thre relevant command registers accordingly. The G2D version 4.1 supports DMA mode as host interface. User can make command list to reduce HOST(ARM) loads. The contents of The command list is setted to relevant registers of G2D by DMA. The command list is composed Header and command sets and Tail. - Header: The number of command set(4Bytes) - Command set: Register offset(4Bytes) + Register data(4Bytes) - Tail: Pointer of base address of the other command list(4Bytes) By Tail field, the G2D can process many command lists without halt at one go. The G2D has following the rendering pipeline. --> Primitive Drawing --> Rotation --> Clipping --> Bilinear Sampling --> Color Key --> ROP --> Mask Operation --> Alpha Blending --> Dithering --> FrameBuffer And supports various operations from the rendering pipeline. - copy - fast solid color fill - window clipping - rotation - flip - 4 operand raster operation(ROP4) - masking operation - alpha blending - color key - dithering - etc User should make the command list to data and registers needed by operation to use. The Exynos G2D driver only manages the command lists received from user. Some registers needs memory base address(physical address) of image. User doesn't know its physical address, so fills the gem handle of that memory than address to command sets, then G2D driver converts it to memory base address. We adds three ioctls and one event for Exynos G2D. - ioctls DRM_EXYNOS_G2D_GET_VER: get the G2D hardware version DRM_EXYNOS_G2D_SET_CMDLIST: set the command list from user to driver DRM_EXYNOS_G2D_EXEC: execute the command lists setted to driver - event DRM_EXYNOS_G2D_EVENT: event to give notification completion of the command list to user Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-05-17 19:06:32 +08:00
},
};