linux/drivers/gpu/drm/bochs/bochs.h

154 lines
4.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/io.h>
#include <linux/console.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_encoder.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_gem.h>
#include <drm/ttm/ttm_bo_driver.h>
#include <drm/ttm/ttm_page_alloc.h>
/* ---------------------------------------------------------------------- */
#define VBE_DISPI_IOPORT_INDEX 0x01CE
#define VBE_DISPI_IOPORT_DATA 0x01CF
#define VBE_DISPI_INDEX_ID 0x0
#define VBE_DISPI_INDEX_XRES 0x1
#define VBE_DISPI_INDEX_YRES 0x2
#define VBE_DISPI_INDEX_BPP 0x3
#define VBE_DISPI_INDEX_ENABLE 0x4
#define VBE_DISPI_INDEX_BANK 0x5
#define VBE_DISPI_INDEX_VIRT_WIDTH 0x6
#define VBE_DISPI_INDEX_VIRT_HEIGHT 0x7
#define VBE_DISPI_INDEX_X_OFFSET 0x8
#define VBE_DISPI_INDEX_Y_OFFSET 0x9
#define VBE_DISPI_INDEX_VIDEO_MEMORY_64K 0xa
#define VBE_DISPI_ID0 0xB0C0
#define VBE_DISPI_ID1 0xB0C1
#define VBE_DISPI_ID2 0xB0C2
#define VBE_DISPI_ID3 0xB0C3
#define VBE_DISPI_ID4 0xB0C4
#define VBE_DISPI_ID5 0xB0C5
#define VBE_DISPI_DISABLED 0x00
#define VBE_DISPI_ENABLED 0x01
#define VBE_DISPI_GETCAPS 0x02
#define VBE_DISPI_8BIT_DAC 0x20
#define VBE_DISPI_LFB_ENABLED 0x40
#define VBE_DISPI_NOCLEARMEM 0x80
/* ---------------------------------------------------------------------- */
enum bochs_types {
BOCHS_QEMU_STDVGA,
BOCHS_UNKNOWN,
};
struct bochs_device {
/* hw */
void __iomem *mmio;
int ioports;
void __iomem *fb_map;
unsigned long fb_base;
unsigned long fb_size;
/* mode */
u16 xres;
u16 yres;
u16 yres_virtual;
u32 stride;
u32 bpp;
/* drm */
struct drm_device *dev;
struct drm_crtc crtc;
struct drm_encoder encoder;
struct drm_connector connector;
bool mode_config_initialized;
/* ttm */
struct {
struct drm_global_reference mem_global_ref;
struct ttm_bo_global_ref bo_global_ref;
struct ttm_bo_device bdev;
bool initialized;
} ttm;
/* fbdev */
struct {
bochs: convert to drm_fb_helper_fbdev_setup/teardown Currently unloading bochs_drm (after unbinding the vtconsole) results in a warning about a leaked connector: [drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked! While investigating a potential fix I noticed that a lot of open-coded functionality is already implemented elsewhere, so start converting it: bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl). bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding "struct drm_framebuffer" from "struct bochs_framebuffer". Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c. For this to work, the GEM object is moved into "drm_framebuffer". After that, "bochs_framebuffer" is no longer needed and therefore removed. Remove the unused "size" and "initialized" fields from fb, the latter is not necessary as drm_fb_helper_fbdev_teardown can be called even if bochsfb_create fails. This theory was tested by returning early and late (just before drm_gem_fbdev_fb_create). Both scenarios fail gracefully although the latter seems to leak the object from bochsfb_create_object (not a regression). Guess on the reason for the encoder leak: drm_framebuffer_cleanup was previously used, but did not destroy much. drm_fb_helper_fbdev_teardown is now used and calls drm_framebuffer_remove which does a bit more work. Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm' and also with Xorg + fbdev (startx -> xterm). The latter triggered a warning in ttm_bo_vm_open that existed before, see https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-3-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-07 06:18:08 +08:00
struct drm_framebuffer *fb;
struct drm_fb_helper helper;
} fb;
};
struct bochs_bo {
struct ttm_buffer_object bo;
struct ttm_placement placement;
struct ttm_bo_kmap_obj kmap;
struct drm_gem_object gem;
struct ttm_place placements[3];
int pin_count;
};
static inline struct bochs_bo *bochs_bo(struct ttm_buffer_object *bo)
{
return container_of(bo, struct bochs_bo, bo);
}
static inline struct bochs_bo *gem_to_bochs_bo(struct drm_gem_object *gem)
{
return container_of(gem, struct bochs_bo, gem);
}
#define DRM_FILE_PAGE_OFFSET (0x100000000ULL >> PAGE_SHIFT)
static inline u64 bochs_bo_mmap_offset(struct bochs_bo *bo)
{
return drm_vma_node_offset_addr(&bo->bo.vma_node);
}
/* ---------------------------------------------------------------------- */
/* bochs_hw.c */
int bochs_hw_init(struct drm_device *dev, uint32_t flags);
void bochs_hw_fini(struct drm_device *dev);
void bochs_hw_setmode(struct bochs_device *bochs,
struct drm_display_mode *mode);
void bochs_hw_setbase(struct bochs_device *bochs,
int x, int y, u64 addr);
/* bochs_mm.c */
int bochs_mm_init(struct bochs_device *bochs);
void bochs_mm_fini(struct bochs_device *bochs);
int bochs_mmap(struct file *filp, struct vm_area_struct *vma);
int bochs_gem_create(struct drm_device *dev, u32 size, bool iskernel,
struct drm_gem_object **obj);
int bochs_gem_init_object(struct drm_gem_object *obj);
void bochs_gem_free_object(struct drm_gem_object *obj);
int bochs_dumb_create(struct drm_file *file, struct drm_device *dev,
struct drm_mode_create_dumb *args);
int bochs_dumb_mmap_offset(struct drm_file *file, struct drm_device *dev,
uint32_t handle, uint64_t *offset);
int bochs_bo_pin(struct bochs_bo *bo, u32 pl_flag, u64 *gpu_addr);
int bochs_bo_unpin(struct bochs_bo *bo);
/* bochs_kms.c */
int bochs_kms_init(struct bochs_device *bochs);
void bochs_kms_fini(struct bochs_device *bochs);
/* bochs_fbdev.c */
int bochs_fbdev_init(struct bochs_device *bochs);
void bochs_fbdev_fini(struct bochs_device *bochs);
bochs: convert to drm_fb_helper_fbdev_setup/teardown Currently unloading bochs_drm (after unbinding the vtconsole) results in a warning about a leaked connector: [drm:drm_mode_config_cleanup] *ERROR* connector Virtual-3 leaked! While investigating a potential fix I noticed that a lot of open-coded functionality is already implemented elsewhere, so start converting it: bochs_fbdev_init -> drm_fb_helper_fbdev_setup: trivial (similar impl). bochs_fbdev_fini -> drm_fb_helper_fbdev_teardown: requires unembedding "struct drm_framebuffer" from "struct bochs_framebuffer". Unembedding drm_framebuffer is made easy using drm_gem_fbdev_fb_create which can replace bochs_fbdev_destroy and custom routines in bochs_mm.c. For this to work, the GEM object is moved into "drm_framebuffer". After that, "bochs_framebuffer" is no longer needed and therefore removed. Remove the unused "size" and "initialized" fields from fb, the latter is not necessary as drm_fb_helper_fbdev_teardown can be called even if bochsfb_create fails. This theory was tested by returning early and late (just before drm_gem_fbdev_fb_create). Both scenarios fail gracefully although the latter seems to leak the object from bochsfb_create_object (not a regression). Guess on the reason for the encoder leak: drm_framebuffer_cleanup was previously used, but did not destroy much. drm_fb_helper_fbdev_teardown is now used and calls drm_framebuffer_remove which does a bit more work. Tested with 'echo 0 > /sys/class/vtconsole/vtcon1/bind; rmmod bochs_drm' and also with Xorg + fbdev (startx -> xterm). The latter triggered a warning in ttm_bo_vm_open that existed before, see https://lkml.kernel.org/r/1464000533-13140-4-git-send-email-mstaudt@suse.de Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Link: http://patchwork.freedesktop.org/patch/msgid/20180906221810.20170-3-peter@lekensteyn.nl Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-09-07 06:18:08 +08:00
extern const struct drm_mode_config_funcs bochs_mode_funcs;