openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/arch/arm/boot/dts/tegra20-whistler.dts

626 lines
14 KiB
Plaintext
Raw Normal View History

ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
/dts-v1/;
ARM: tegra: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all Tegra DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as the IDs and flags in GPIO specifiers. Use of those features will increase the readability of the device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-18 06:38:21 +08:00
#include "tegra20.dtsi"
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
/ {
ARM: DT: tegra: Unify the description of Tegra20 boards Use engineering name 'Tegra20' instead of 'Tegra2' Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-12-20 17:41:29 +08:00
model = "NVIDIA Tegra20 Whistler evaluation board";
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
compatible = "nvidia,whistler", "nvidia,tegra20";
memory {
reg = <0x00000000 0x20000000>;
};
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 08:53:16 +08:00
host1x@50000000 {
hdmi@54280000 {
ARM: tegra: whistler: enable HDMI port Enable host1x, and the HDMI output. Whistler also has a DSI-based LCD, and a VGA output. tegradrm doesn't support either of those output types yet. Based on work by Thierry Reding for TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-17 01:53:04 +08:00
status = "okay";
vdd-supply = <&hdmi_vdd_reg>;
pll-supply = <&hdmi_pll_reg>;
nvidia,ddc-i2c-bus = <&hdmi_ddc>;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 08:25:15 +08:00
nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
GPIO_ACTIVE_HIGH>;
ARM: tegra: whistler: enable HDMI port Enable host1x, and the HDMI output. Whistler also has a DSI-based LCD, and a VGA output. tegradrm doesn't support either of those output types yet. Based on work by Thierry Reding for TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-17 01:53:04 +08:00
};
};
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 08:53:16 +08:00
pinmux@70000014 {
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata", "atb", "ate", "gma", "gmb",
"gmc", "gmd", "gpu";
nvidia,function = "gmi";
};
atc {
nvidia,pins = "atc", "atd";
nvidia,function = "sdio4";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "osc";
};
crtp {
nvidia,pins = "crtp";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,function = "vi";
};
dte {
nvidia,pins = "dte";
nvidia,function = "rsvd1";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gme {
nvidia,pins = "gme";
nvidia,function = "dap5";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "pta";
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcc", "kbce", "kbcf";
nvidia,function = "kbc";
};
kbcb {
nvidia,pins = "kbcb", "kbcd";
nvidia,function = "sdio2";
};
lcsn {
nvidia,pins = "lcsn", "lsck", "lsda", "lsdi",
"spia", "spib", "spic";
nvidia,function = "spi3";
};
ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldc", "ldi",
"lhp0", "lhp1", "lhp2", "lhs", "lm0",
"lm1", "lpp", "lpw0", "lpw1", "lpw2",
"lsc0", "lsc1", "lspi", "lvp0", "lvp1",
"lvs";
nvidia,function = "displaya";
};
owc {
nvidia,pins = "owc", "uac";
nvidia,function = "owr";
};
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd", "slxa",
"slxc", "slxd", "slxk";
nvidia,function = "sdio3";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
spdi {
nvidia,pins = "spdi", "spdo";
nvidia,function = "rsvd2";
};
spid {
nvidia,pins = "spid", "spie", "spig", "spih";
nvidia,function = "spi2_alt";
};
spif {
nvidia,pins = "spif";
nvidia,function = "spi2";
};
uaa {
nvidia,pins = "uaa", "uab";
nvidia,function = "uarta";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
uda {
nvidia,pins = "uda";
nvidia,function = "spi1";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "ddc", "gma",
"gmb", "gmc", "gmd", "irrx", "irtx",
"kbca", "kbcb", "kbcc", "kbcd", "kbce",
"kbcf", "sdc", "sdd", "spie", "spig",
"spih", "uaa", "uab", "uad", "uca",
"ucb";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_atd {
nvidia,pins = "atd", "ate", "cdev1", "csus",
"dap1", "dap2", "dap3", "dap4", "dte",
"dtf", "gpu", "gpu7", "gpv", "i2cp",
"rm", "sdio1", "slxa", "slxc", "slxd",
"slxk", "spdi", "spdo", "uac", "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_cdev2 {
nvidia,pins = "cdev2", "spia", "spib";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "lc", "pmca",
"pmcb", "pmcc", "pmcd", "xm2c",
"xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd",
"spid", "spif";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
conf_gme {
nvidia,pins = "gme", "owc", "pta", "spic";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
conf_ls {
nvidia,pins = "ls", "pmce";
nvidia,pull = <2>;
};
drive_dap1 {
nvidia,pins = "drive_dap1";
nvidia,high-speed-mode = <0>;
nvidia,schmitt = <1>;
nvidia,low-power-mode = <0>;
nvidia,pull-down-strength = <0>;
nvidia,pull-up-strength = <0>;
nvidia,slew-rate-rising = <0>;
nvidia,slew-rate-falling = <0>;
};
};
};
i2s@70002800 {
status = "okay";
};
serial@70006000 {
status = "okay";
};
ARM: tegra: whistler: enable HDMI port Enable host1x, and the HDMI output. Whistler also has a DSI-based LCD, and a VGA output. tegradrm doesn't support either of those output types yet. Based on work by Thierry Reding for TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-17 01:53:04 +08:00
hdmi_ddc: i2c@7000c400 {
status = "okay";
clock-frequency = <100000>;
};
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
i2c@7000d000 {
status = "okay";
clock-frequency = <100000>;
codec: codec@1a {
compatible = "wlf,wm8753";
reg = <0x1a>;
};
tca6416: gpio@20 {
compatible = "ti,tca6416";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
max8907@3c {
compatible = "maxim,max8907";
reg = <0x3c>;
ARM: tegra: convert device tree files to use IRQ defines Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-14 03:51:51 +08:00
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
ARM: dt: tegra: whistler: configure power off Add DT property to tell the MAX8907 that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-12 03:13:05 +08:00
maxim,system-power-controller;
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
mbatt-supply = <&usb0_vbus_reg>;
in-v1-supply = <&mbatt_reg>;
in-v2-supply = <&mbatt_reg>;
in-v3-supply = <&mbatt_reg>;
in1-supply = <&mbatt_reg>;
in2-supply = <&nvvdd_sv3_reg>;
in3-supply = <&mbatt_reg>;
in4-supply = <&mbatt_reg>;
in5-supply = <&mbatt_reg>;
in6-supply = <&mbatt_reg>;
in7-supply = <&mbatt_reg>;
in8-supply = <&mbatt_reg>;
in9-supply = <&mbatt_reg>;
in10-supply = <&mbatt_reg>;
in11-supply = <&mbatt_reg>;
in12-supply = <&mbatt_reg>;
in13-supply = <&mbatt_reg>;
in14-supply = <&mbatt_reg>;
in15-supply = <&mbatt_reg>;
in16-supply = <&mbatt_reg>;
in17-supply = <&nvvdd_sv3_reg>;
in18-supply = <&nvvdd_sv3_reg>;
in19-supply = <&mbatt_reg>;
in20-supply = <&mbatt_reg>;
regulators {
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
mbatt_reg: mbatt {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "vbat_pmu";
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
sd1 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_sv1,vdd_cpu_pmu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
sd2 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_sv2,vdd_core";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
nvvdd_sv3_reg: sd3 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_sv3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo1 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo2 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo2,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo3 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo3,vcom_1v8b";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo4 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo4,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo5 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ARM: tegra: whistler: enable HDMI port Enable host1x, and the HDMI output. Whistler also has a DSI-based LCD, and a VGA output. tegradrm doesn't support either of those output types yet. Based on work by Thierry Reding for TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-17 01:53:04 +08:00
hdmi_pll_reg: ldo6 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo6,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo7 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo7,avddio_audio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo8 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo9 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo9,avdd_cam*";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo10 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ARM: tegra: whistler: enable HDMI port Enable host1x, and the HDMI output. Whistler also has a DSI-based LCD, and a VGA output. tegradrm doesn't support either of those output types yet. Based on work by Thierry Reding for TrimSlice. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-17 01:53:04 +08:00
hdmi_vdd_reg: ldo11 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo12 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo12,vddio_sdio";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo13 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo14 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo14,avdd_vdac";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo15 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo16 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo16,vdd_dbrtr";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo17 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo17,vddio_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo18 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo19 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
ldo20 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
out5v {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "usb0_vbus_reg";
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
out33v {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "pmu_out3v3";
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
bbat {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "pmu_bbat";
regulator-min-microvolt = <2400000>;
regulator-max-microvolt = <2400000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
sdby {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "vdd_aon";
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-21 07:04:06 +08:00
vrtc {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulator-name = "vrtc,pmu_vccadc";
regulator-always-on;
};
};
};
};
ARM: tegra: fix node sort order For Tegra DT files, I've been attempting to keep the nodes sorted in the order: 1) Nodes with reg, in order of reg. 2) Nodes without reg, alphabetically. This patch fixes a few escapees that I missed:-( The diffs look larger than they really are, because sometimes when one node was moved up or down, diff chose to represent this as many other nodes being moved the other way! Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-27 05:43:45 +08:00
kbc@7000e200 {
status = "okay";
nvidia,debounce-delay-ms = <20>;
nvidia,repeat-delay-ms = <160>;
nvidia,kbc-row-pins = <0 1 2>;
nvidia,kbc-col-pins = <16 17>;
nvidia,wakeup-source;
linux,keymap = <0x00000074 /* KEY_POWER */
0x01000066 /* KEY_HOME */
0x0101009E /* KEY_BACK */
0x0201008B>; /* KEY_MENU */
};
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 08:53:16 +08:00
pmc@7000e400 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
nvidia,invert-interrupt;
ARM: tegra: enable LP1 suspend mode Enabling the LP1 suspend mode for Tegra devices. Tested-by: Marc Dietrich <marvin24@gmx.de> # paz00 board Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 17:40:07 +08:00
nvidia,suspend-mode = <1>;
ARM: dts: tegra: add the PM configurations of PMC Adding the PM configuration of PMC when the platform support suspend function. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 19:31:52 +08:00
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <1000>;
nvidia,core-pwr-good-time = <0 3845>;
nvidia,core-pwr-off-time = <93727>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
nvidia,combined-power-req;
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
};
usb@c5000000 {
status = "okay";
};
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
usb-phy@c5000000 {
status = "okay";
vbus-supply = <&vbus1_reg>;
};
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
usb@c5008000 {
status = "okay";
};
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
usb-phy@c5008000 {
status = "okay";
vbus-supply = <&vbus3_reg>;
};
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
sdhci@c8000400 {
status = "okay";
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 08:25:15 +08:00
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
bus-width = <8>;
};
sdhci@c8000600 {
status = "okay";
bus-width = <8>;
ARM: tegra: add non-removable and keep-power-in-suspend property for MMC This patch adds "non-removable" property of MMC host where the eMMC device is for Tegra platform. And the "keep-power-in-suspend" property was used for the SDIO device that need this to go into suspend mode (e.g. BRCM43xx series). Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-04 04:34:39 +08:00
non-removable;
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
};
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 19:31:27 +08:00
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 08:53:16 +08:00
clk32k_in: clock@0 {
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 19:31:27 +08:00
compatible = "fixed-clock";
reg=<0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 08:53:16 +08:00
usb0_vbus_reg: regulator@0 {
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
vbus1_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "vbus1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
ARM: tegra: fix VBUS regulator GPIO polarity in DT Commit 4c94c8b "ARM: tegra: update device trees for USB binding rework" added regulator definitions for GPIO-controlled USB VBUS. However, none of these contained the essential DT property enable-active-high. Add this so that the regulator definitions are correct. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-02 05:07:05 +08:00
enable-active-high;
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
gpio = <&tca6416 0 0>; /* GPIO_PMU0 */
ARM: tegra: always enable USB VBUS regulators This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that USB VBUS doesn't get turned on, so USB devices are not detected. This affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to which the SSD is connected) and the external port(s) on Seaboard/ Springbank and Whistler. The Tegra DT as written in v3.11 allows two paths to enable USB VBUS: 1) Via the legacy DT binding for the USB controller; it can directly acquire a VBUS GPIO and activate it. 2) Via a regulator for VBUS, which is referenced by the new DT binding for the USB controller. Those two methods both use the same GPIO, and hence whichever of the USB controller and regulator gets probed first ends up owning the GPIO. In practice, the USB driver only supports path (1) above, since the patches to support the new USB binding are not present until v3.12:-( In practice, the regulator ends up being probed first and owning the GPIO. Since nothing enables the regulator (the USB driver code is not yet present), the regulator ends up being turned off. This originally caused no problem, because the polarity in the regulator definition was incorrect, so attempting to turn off the regulator actually turned it on, and everything worked:-( However, when testing the new USB driver code in v3.12, I noticed the incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT". In the context of v3.11, this patch then caused the USB VBUS to actually turn off, which broke USB ports with VBUS control. I got this patch included in v3.11-rc1 since it fixed a bug in device tree (incorrect polarity specification), and hence was suitable to be included early in the rc series. I evidently did not test the patch at all, or correctly, in the context of v3.11, and hence did not notice the issue that I have explained above:-( Fix this by making the USB VBUS regulators always enabled. This way, if the regulator owns the GPIO, it will always be turned on, even if there is no USB driver code to request the regulator be turned on. Even ignoring this bug, this is a reasonable way to configure the HW anyway. If this patch is applied to v3.11, it will cause a couple pretty trivial conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since the context right above the added lines changed in patches destined for v3.12. Reported-by: Kyle McMartin <kmcmarti@redhat.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-21 04:00:13 +08:00
regulator-always-on;
regulator-boot-on;
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
};
vbus3_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vbus3";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
ARM: tegra: fix VBUS regulator GPIO polarity in DT Commit 4c94c8b "ARM: tegra: update device trees for USB binding rework" added regulator definitions for GPIO-controlled USB VBUS. However, none of these contained the essential DT property enable-active-high. Add this so that the regulator definitions are correct. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-07-02 05:07:05 +08:00
enable-active-high;
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
gpio = <&tca6416 1 0>; /* GPIO_PMU1 */
ARM: tegra: always enable USB VBUS regulators This fixes a regression exposed during the merge window by commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT"; namely that USB VBUS doesn't get turned on, so USB devices are not detected. This affects the internal USB port on TrimSlice (i.e. the USB->SATA bridge, to which the SSD is connected) and the external port(s) on Seaboard/ Springbank and Whistler. The Tegra DT as written in v3.11 allows two paths to enable USB VBUS: 1) Via the legacy DT binding for the USB controller; it can directly acquire a VBUS GPIO and activate it. 2) Via a regulator for VBUS, which is referenced by the new DT binding for the USB controller. Those two methods both use the same GPIO, and hence whichever of the USB controller and regulator gets probed first ends up owning the GPIO. In practice, the USB driver only supports path (1) above, since the patches to support the new USB binding are not present until v3.12:-( In practice, the regulator ends up being probed first and owning the GPIO. Since nothing enables the regulator (the USB driver code is not yet present), the regulator ends up being turned off. This originally caused no problem, because the polarity in the regulator definition was incorrect, so attempting to turn off the regulator actually turned it on, and everything worked:-( However, when testing the new USB driver code in v3.12, I noticed the incorrect polarity and fixed it in commit 9f310de "ARM: tegra: fix VBUS regulator GPIO polarity in DT". In the context of v3.11, this patch then caused the USB VBUS to actually turn off, which broke USB ports with VBUS control. I got this patch included in v3.11-rc1 since it fixed a bug in device tree (incorrect polarity specification), and hence was suitable to be included early in the rc series. I evidently did not test the patch at all, or correctly, in the context of v3.11, and hence did not notice the issue that I have explained above:-( Fix this by making the USB VBUS regulators always enabled. This way, if the regulator owns the GPIO, it will always be turned on, even if there is no USB driver code to request the regulator be turned on. Even ignoring this bug, this is a reasonable way to configure the HW anyway. If this patch is applied to v3.11, it will cause a couple pretty trivial conflicts in tegra20-{trimslice,seaboard}.dts when creating v3.12, since the context right above the added lines changed in patches destined for v3.12. Reported-by: Kyle McMartin <kmcmarti@redhat.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-08-21 04:00:13 +08:00
regulator-always-on;
regulator-boot-on;
ARM: tegra: update device trees for USB binding rework This patch updates all Tegra board files so that they contain all the properties required by the updated USB DT binding. Note that this patch only adds the new properties and does not yet remove the old properties, in order to maintain bisectability. The old properties will be removed once the driver has been updated to assume the new bindings. Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com> [swarren: fixed some newly added regulator-name properties to better match schematic, avoided duplicate regulator-name on Whistler.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-16 22:12:57 +08:00
};
ARM: dt: tegra: whistler: add regulators Whistler uses a Maxim 8907 regulator. Instantiate this. The voltage settings were derived from the schematic. The only exception is the BBAT voltage; the schematic says 1.2v, but the HW can't go that low, so use the HW default of 2.4v instead. Almost all regulators list all driven supply signal names in their regulator-names property. The exception is nvvdd_sv3, which is in turn named 12 more different names on the schematic, so these were omitted for brevity. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-26 06:41:25 +08:00
};
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
sound {
compatible = "nvidia,tegra-audio-wm8753-whistler",
"nvidia,tegra-audio-wm8753";
nvidia,model = "NVIDIA Tegra Whistler";
nvidia,audio-routing =
"Headphone Jack", "LOUT1",
"Headphone Jack", "ROUT1",
"MIC2", "Mic Jack",
"MIC2N", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
ARM: tegra: add clocks property to sound nodes Audio-related clocks need to be represented in the device tree. Update bindings to describe which clocks are needed, and DT files to include those clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-27 06:45:52 +08:00
ARM: tegra20: convert device tree files to use CLK defines Use the Tegra20 CAR binding header (tegra20-car.h) to replace magic numbers in the device tree. For example, - clocks = <&tegra_car 28>; + clocks = <&tegra_car CLK_HOST1X>; Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, updated since tegra20-car.h moved for consistency] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-23 00:45:32 +08:00
clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
<&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA20_CLK_CDEV1>;
ARM: tegra: add clocks property to sound nodes Audio-related clocks need to be represented in the device tree. Update bindings to describe which clocks are needed, and DT files to include those clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-27 06:45:52 +08:00
clock-names = "pll_a", "pll_a_out0", "mclk";
ARM: dt: tegra: add Whistler device tree file Whistler is a highly configurable Tegra evaluation and development board. This change adds support for the following specific configuration: E1120 motherboard E1108 CPU board E1116 PMU board The motherboard configuration switches are set as follows: SW1=0 SW2=0 SW3=5 S1/S2/S3/S4 all on, except S3 7/8 are off. Other combinations of daugher boards may work to varying degrees, but will likely require some SW adjustment. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-21 06:57:38 +08:00
};
};