linux/arch/arc/include/asm/bitops.h

435 lines
9.7 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*/
#ifndef _ASM_BITOPS_H
#define _ASM_BITOPS_H
#ifndef _LINUX_BITOPS_H
#error only <linux/bitops.h> can be included directly
#endif
#ifndef __ASSEMBLY__
#include <linux/types.h>
#include <linux/compiler.h>
#include <asm/barrier.h>
#ifndef CONFIG_ARC_HAS_LLSC
#include <asm/smp.h>
#endif
#ifdef CONFIG_ARC_HAS_LLSC
/*
* Hardware assisted Atomic-R-M-W
*/
#define BIT_OP(op, c_op, asm_op) \
static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned int temp; \
\
m += nr >> 5; \
\
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
nr &= 0x1f; \
\
__asm__ __volatile__( \
"1: llock %0, [%1] \n" \
" " #asm_op " %0, %0, %2 \n" \
" scond %0, [%1] \n" \
" bnz 1b \n" \
: "=&r"(temp) /* Early clobber, to prevent reg reuse */ \
: "r"(m), /* Not "m": llock only supports reg direct addr mode */ \
"ir"(nr) \
: "cc"); \
}
/*
* Semantically:
* Test the bit
* if clear
* set it and return 0 (old value)
* else
* return 1 (old value).
*
* Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally
* and the old value of bit is returned
*/
#define TEST_N_BIT_OP(op, c_op, asm_op) \
static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned long old, temp; \
\
m += nr >> 5; \
\
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
nr &= 0x1f; \
\
/* \
* Explicit full memory barrier needed before/after as \
* LLOCK/SCOND themselves don't provide any such smenatic \
*/ \
smp_mb(); \
\
__asm__ __volatile__( \
"1: llock %0, [%2] \n" \
" " #asm_op " %1, %0, %3 \n" \
" scond %1, [%2] \n" \
" bnz 1b \n" \
: "=&r"(old), "=&r"(temp) \
: "r"(m), "ir"(nr) \
: "cc"); \
\
smp_mb(); \
\
return (old & (1 << nr)) != 0; \
}
#elif !defined(CONFIG_ARC_PLAT_EZNPS)
/*
* Non hardware assisted Atomic-R-M-W
* Locking would change to irq-disabling only (UP) and spinlocks (SMP)
*
* There's "significant" micro-optimization in writing our own variants of
* bitops (over generic variants)
*
* (1) The generic APIs have "signed" @nr while we have it "unsigned"
* This avoids extra code to be generated for pointer arithmatic, since
* is "not sure" that index is NOT -ve
* (2) Utilize the fact that ARCompact bit fidding insn (BSET/BCLR/ASL) etc
* only consider bottom 5 bits of @nr, so NO need to mask them off.
* (GCC Quirk: however for constant @nr we still need to do the masking
* at compile time)
*/
#define BIT_OP(op, c_op, asm_op) \
static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned long temp, flags; \
m += nr >> 5; \
\
/* \
* spin lock/unlock provide the needed smp_mb() before/after \
*/ \
bitops_lock(flags); \
\
temp = *m; \
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
*m = temp c_op (1UL << (nr & 0x1f)); \
\
bitops_unlock(flags); \
}
#define TEST_N_BIT_OP(op, c_op, asm_op) \
static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned long old, flags; \
m += nr >> 5; \
\
bitops_lock(flags); \
\
old = *m; \
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
*m = old c_op (1UL << (nr & 0x1f)); \
\
bitops_unlock(flags); \
\
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
return (old & (1UL << (nr & 0x1f))) != 0; \
}
#else /* CONFIG_ARC_PLAT_EZNPS */
#define BIT_OP(op, c_op, asm_op) \
static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
m += nr >> 5; \
\
nr = (1UL << (nr & 0x1f)); \
if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
nr = ~nr; \
\
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
: \
: "r"(nr), "r"(m), "i"(asm_op) \
: "r2", "r3", "memory"); \
}
#define TEST_N_BIT_OP(op, c_op, asm_op) \
static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned long old; \
\
m += nr >> 5; \
\
nr = old = (1UL << (nr & 0x1f)); \
if (asm_op == CTOP_INST_AAND_DI_R2_R2_R3) \
old = ~old; \
\
/* Explicit full memory barrier needed before/after */ \
smp_mb(); \
\
__asm__ __volatile__( \
" mov r2, %0\n" \
" mov r3, %1\n" \
" .word %2\n" \
" mov %0, r2" \
: "+r"(old) \
: "r"(m), "i"(asm_op) \
: "r2", "r3", "memory"); \
\
smp_mb(); \
\
return (old & nr) != 0; \
}
#endif /* CONFIG_ARC_PLAT_EZNPS */
/***************************************
* Non atomic variants
**************************************/
#define __BIT_OP(op, c_op, asm_op) \
static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m) \
{ \
unsigned long temp; \
m += nr >> 5; \
\
temp = *m; \
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
*m = temp c_op (1UL << (nr & 0x1f)); \
}
#define __TEST_N_BIT_OP(op, c_op, asm_op) \
static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
{ \
unsigned long old; \
m += nr >> 5; \
\
old = *m; \
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
*m = old c_op (1UL << (nr & 0x1f)); \
\
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
return (old & (1UL << (nr & 0x1f))) != 0; \
}
#define BIT_OPS(op, c_op, asm_op) \
\
/* set_bit(), clear_bit(), change_bit() */ \
BIT_OP(op, c_op, asm_op) \
\
/* test_and_set_bit(), test_and_clear_bit(), test_and_change_bit() */\
TEST_N_BIT_OP(op, c_op, asm_op) \
\
/* __set_bit(), __clear_bit(), __change_bit() */ \
__BIT_OP(op, c_op, asm_op) \
\
/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
__TEST_N_BIT_OP(op, c_op, asm_op)
#ifndef CONFIG_ARC_PLAT_EZNPS
BIT_OPS(set, |, bset)
BIT_OPS(clear, & ~, bclr)
BIT_OPS(change, ^, bxor)
#else
BIT_OPS(set, |, CTOP_INST_AOR_DI_R2_R2_R3)
BIT_OPS(clear, & ~, CTOP_INST_AAND_DI_R2_R2_R3)
BIT_OPS(change, ^, CTOP_INST_AXOR_DI_R2_R2_R3)
#endif
/*
* This routine doesn't need to be atomic.
*/
static inline int
test_bit(unsigned int nr, const volatile unsigned long *addr)
{
unsigned long mask;
addr += nr >> 5;
ARC: Make ARC bitops "safer" (add anti-optimization) ARCompact/ARCv2 ISA provide that any instructions which deals with bitpos/count operand ASL, LSL, BSET, BCLR, BMSK .... will only consider lower 5 bits. i.e. auto-clamp the pos to 0-31. ARC Linux bitops exploited this fact by NOT explicitly masking out upper bits for @nr operand in general, saving a bunch of AND/BMSK instructions in generated code around bitops. While this micro-optimization has worked well over years it is NOT safe as shifting a number with a value, greater than native size is "undefined" per "C" spec. So as it turns outm EZChip ran into this eventually, in their massive muti-core SMP build with 64 cpus. There was a test_bit() inside a loop from 63 to 0 and gcc was weirdly optimizing away the first iteration (so it was really adhering to standard by implementing undefined behaviour vs. removing all the iterations which were phony i.e. (1 << [63..32]) | for i = 63 to 0 | X = ( 1 << i ) | if X == 0 | continue So fix the code to do the explicit masking at the expense of generating additional instructions. Fortunately, this can be mitigated to a large extent as gcc has SHIFT_COUNT_TRUNCATED which allows combiner to fold masking into shift operation itself. It is currently not enabled in ARC gcc backend, but could be done after a bit of testing. Fixes STAR 9000866918 ("unsafe "undefined behavior" code in kernel") Reported-by: Noam Camus <noamc@ezchip.com> Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-03 13:56:22 +08:00
mask = 1UL << (nr & 0x1f);
return ((mask & *addr) != 0);
}
#ifdef CONFIG_ISA_ARCOMPACT
/*
* Count the number of zeros, starting from MSB
* Helper for fls( ) friends
* This is a pure count, so (1-32) or (0-31) doesn't apply
* It could be 0 to 32, based on num of 0's in there
* clz(0x8000_0000) = 0, clz(0xFFFF_FFFF)=0, clz(0) = 32, clz(1) = 31
*/
static inline __attribute__ ((const)) int clz(unsigned int x)
{
unsigned int res;
__asm__ __volatile__(
" norm.f %0, %1 \n"
" mov.n %0, 0 \n"
" add.p %0, %0, 1 \n"
: "=r"(res)
: "r"(x)
: "cc");
return res;
}
static inline int constant_fls(unsigned int x)
{
int r = 32;
if (!x)
return 0;
if (!(x & 0xffff0000u)) {
x <<= 16;
r -= 16;
}
if (!(x & 0xff000000u)) {
x <<= 8;
r -= 8;
}
if (!(x & 0xf0000000u)) {
x <<= 4;
r -= 4;
}
if (!(x & 0xc0000000u)) {
x <<= 2;
r -= 2;
}
if (!(x & 0x80000000u)) {
x <<= 1;
r -= 1;
}
return r;
}
/*
* fls = Find Last Set in word
* @result: [1-32]
* fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
*/
static inline __attribute__ ((const)) int fls(unsigned int x)
{
if (__builtin_constant_p(x))
return constant_fls(x);
return 32 - clz(x);
}
/*
* __fls: Similar to fls, but zero based (0-31)
*/
static inline __attribute__ ((const)) int __fls(unsigned long x)
{
if (!x)
return 0;
else
return fls(x) - 1;
}
/*
* ffs = Find First Set in word (LSB to MSB)
* @result: [1-32], 0 if all 0's
*/
#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
{
if (!word)
return word;
return ffs(word) - 1;
}
#else /* CONFIG_ISA_ARCV2 */
/*
* fls = Find Last Set in word
* @result: [1-32]
* fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
*/
static inline __attribute__ ((const)) int fls(unsigned long x)
{
int n;
asm volatile(
" fls.f %0, %1 \n" /* 0:31; 0(Z) if src 0 */
" add.nz %0, %0, 1 \n" /* 0:31 -> 1:32 */
: "=r"(n) /* Early clobber not needed */
: "r"(x)
: "cc");
return n;
}
/*
* __fls: Similar to fls, but zero based (0-31). Also 0 if no bit set
*/
static inline __attribute__ ((const)) int __fls(unsigned long x)
{
/* FLS insn has exactly same semantics as the API */
return __builtin_arc_fls(x);
}
/*
* ffs = Find First Set in word (LSB to MSB)
* @result: [1-32], 0 if all 0's
*/
static inline __attribute__ ((const)) int ffs(unsigned long x)
{
int n;
asm volatile(
" ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */
" add.nz %0, %0, 1 \n" /* 0:31 -> 1:32 */
" mov.z %0, 0 \n" /* 31(Z)-> 0 */
: "=r"(n) /* Early clobber not needed */
: "r"(x)
: "cc");
return n;
}
/*
* __ffs: Similar to ffs, but zero based (0-31)
*/
static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
{
unsigned long n;
asm volatile(
" ffs.f %0, %1 \n" /* 0:31; 31(Z) if src 0 */
" mov.z %0, 0 \n" /* 31(Z)-> 0 */
: "=r"(n)
: "r"(x)
: "cc");
return n;
}
#endif /* CONFIG_ISA_ARCOMPACT */
/*
* ffz = Find First Zero in word.
* @return:[0-31], 32 if all 1's
*/
#define ffz(x) __ffs(~(x))
#include <asm-generic/bitops/hweight.h>
#include <asm-generic/bitops/fls64.h>
#include <asm-generic/bitops/sched.h>
#include <asm-generic/bitops/lock.h>
#include <asm-generic/bitops/find.h>
#include <asm-generic/bitops/le.h>
#include <asm-generic/bitops/ext2-atomic-setbit.h>
#endif /* !__ASSEMBLY__ */
#endif