blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
/*
|
2010-10-27 11:46:22 +08:00
|
|
|
* Copyright 2005-2010 Analog Devices Inc.
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
*
|
2009-09-24 22:11:24 +08:00
|
|
|
* Licensed under the ADI BSD license or the GPL-2 (or later)
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef _DEF_BF537_H
|
|
|
|
|
#define _DEF_BF537_H
|
|
|
|
|
|
2007-05-21 18:09:31 +08:00
|
|
|
/* Include all MMR and bit defines common to BF534 */
|
|
|
|
|
#include "defBF534.h"
|
|
|
|
|
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
/************************************************************************************
|
|
|
|
|
** Define EMAC Section Unique to BF536/BF537
|
|
|
|
|
*************************************************************************************/
|
|
|
|
|
|
|
|
|
|
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
|
|
|
|
|
#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
|
|
|
|
|
#define EMAC_ADDRLO 0xFFC03004 /* Address Low (32 LSBs) Register */
|
|
|
|
|
#define EMAC_ADDRHI 0xFFC03008 /* Address High (16 MSBs) Register */
|
|
|
|
|
#define EMAC_HASHLO 0xFFC0300C /* Multicast Hash Table Low (Bins 31-0) Register */
|
|
|
|
|
#define EMAC_HASHHI 0xFFC03010 /* Multicast Hash Table High (Bins 63-32) Register */
|
|
|
|
|
#define EMAC_STAADD 0xFFC03014 /* Station Management Address Register */
|
|
|
|
|
#define EMAC_STADAT 0xFFC03018 /* Station Management Data Register */
|
|
|
|
|
#define EMAC_FLC 0xFFC0301C /* Flow Control Register */
|
|
|
|
|
#define EMAC_VLAN1 0xFFC03020 /* VLAN1 Tag Register */
|
|
|
|
|
#define EMAC_VLAN2 0xFFC03024 /* VLAN2 Tag Register */
|
|
|
|
|
#define EMAC_WKUP_CTL 0xFFC0302C /* Wake-Up Control/Status Register */
|
|
|
|
|
#define EMAC_WKUP_FFMSK0 0xFFC03030 /* Wake-Up Frame Filter 0 Byte Mask Register */
|
|
|
|
|
#define EMAC_WKUP_FFMSK1 0xFFC03034 /* Wake-Up Frame Filter 1 Byte Mask Register */
|
|
|
|
|
#define EMAC_WKUP_FFMSK2 0xFFC03038 /* Wake-Up Frame Filter 2 Byte Mask Register */
|
|
|
|
|
#define EMAC_WKUP_FFMSK3 0xFFC0303C /* Wake-Up Frame Filter 3 Byte Mask Register */
|
|
|
|
|
#define EMAC_WKUP_FFCMD 0xFFC03040 /* Wake-Up Frame Filter Commands Register */
|
|
|
|
|
#define EMAC_WKUP_FFOFF 0xFFC03044 /* Wake-Up Frame Filter Offsets Register */
|
|
|
|
|
#define EMAC_WKUP_FFCRC0 0xFFC03048 /* Wake-Up Frame Filter 0,1 CRC-16 Register */
|
|
|
|
|
#define EMAC_WKUP_FFCRC1 0xFFC0304C /* Wake-Up Frame Filter 2,3 CRC-16 Register */
|
|
|
|
|
|
|
|
|
|
#define EMAC_SYSCTL 0xFFC03060 /* EMAC System Control Register */
|
|
|
|
|
#define EMAC_SYSTAT 0xFFC03064 /* EMAC System Status Register */
|
|
|
|
|
#define EMAC_RX_STAT 0xFFC03068 /* RX Current Frame Status Register */
|
|
|
|
|
#define EMAC_RX_STKY 0xFFC0306C /* RX Sticky Frame Status Register */
|
|
|
|
|
#define EMAC_RX_IRQE 0xFFC03070 /* RX Frame Status Interrupt Enables Register */
|
|
|
|
|
#define EMAC_TX_STAT 0xFFC03074 /* TX Current Frame Status Register */
|
|
|
|
|
#define EMAC_TX_STKY 0xFFC03078 /* TX Sticky Frame Status Register */
|
|
|
|
|
#define EMAC_TX_IRQE 0xFFC0307C /* TX Frame Status Interrupt Enables Register */
|
|
|
|
|
|
|
|
|
|
#define EMAC_MMC_CTL 0xFFC03080 /* MMC Counter Control Register */
|
|
|
|
|
#define EMAC_MMC_RIRQS 0xFFC03084 /* MMC RX Interrupt Status Register */
|
|
|
|
|
#define EMAC_MMC_RIRQE 0xFFC03088 /* MMC RX Interrupt Enables Register */
|
|
|
|
|
#define EMAC_MMC_TIRQS 0xFFC0308C /* MMC TX Interrupt Status Register */
|
|
|
|
|
#define EMAC_MMC_TIRQE 0xFFC03090 /* MMC TX Interrupt Enables Register */
|
|
|
|
|
|
|
|
|
|
#define EMAC_RXC_OK 0xFFC03100 /* RX Frame Successful Count */
|
|
|
|
|
#define EMAC_RXC_FCS 0xFFC03104 /* RX Frame FCS Failure Count */
|
|
|
|
|
#define EMAC_RXC_ALIGN 0xFFC03108 /* RX Alignment Error Count */
|
|
|
|
|
#define EMAC_RXC_OCTET 0xFFC0310C /* RX Octets Successfully Received Count */
|
|
|
|
|
#define EMAC_RXC_DMAOVF 0xFFC03110 /* Internal MAC Sublayer Error RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_UNICST 0xFFC03114 /* Unicast RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_MULTI 0xFFC03118 /* Multicast RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_BROAD 0xFFC0311C /* Broadcast RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_LNERRI 0xFFC03120 /* RX Frame In Range Error Count */
|
|
|
|
|
#define EMAC_RXC_LNERRO 0xFFC03124 /* RX Frame Out Of Range Error Count */
|
|
|
|
|
#define EMAC_RXC_LONG 0xFFC03128 /* RX Frame Too Long Count */
|
|
|
|
|
#define EMAC_RXC_MACCTL 0xFFC0312C /* MAC Control RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_OPCODE 0xFFC03130 /* Unsupported Op-Code RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_PAUSE 0xFFC03134 /* MAC Control Pause RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_ALLFRM 0xFFC03138 /* Overall RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_ALLOCT 0xFFC0313C /* Overall RX Octet Count */
|
|
|
|
|
#define EMAC_RXC_TYPED 0xFFC03140 /* Type/Length Consistent RX Frame Count */
|
|
|
|
|
#define EMAC_RXC_SHORT 0xFFC03144 /* RX Frame Fragment Count - Byte Count x < 64 */
|
|
|
|
|
#define EMAC_RXC_EQ64 0xFFC03148 /* Good RX Frame Count - Byte Count x = 64 */
|
|
|
|
|
#define EMAC_RXC_LT128 0xFFC0314C /* Good RX Frame Count - Byte Count 64 <= x < 128 */
|
|
|
|
|
#define EMAC_RXC_LT256 0xFFC03150 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
|
|
|
|
|
#define EMAC_RXC_LT512 0xFFC03154 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
|
|
|
|
|
#define EMAC_RXC_LT1024 0xFFC03158 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
|
|
|
|
|
#define EMAC_RXC_GE1024 0xFFC0315C /* Good RX Frame Count - Byte Count x >= 1024 */
|
|
|
|
|
|
|
|
|
|
#define EMAC_TXC_OK 0xFFC03180 /* TX Frame Successful Count */
|
|
|
|
|
#define EMAC_TXC_1COL 0xFFC03184 /* TX Frames Successful After Single Collision Count */
|
|
|
|
|
#define EMAC_TXC_GT1COL 0xFFC03188 /* TX Frames Successful After Multiple Collisions Count */
|
|
|
|
|
#define EMAC_TXC_OCTET 0xFFC0318C /* TX Octets Successfully Received Count */
|
|
|
|
|
#define EMAC_TXC_DEFER 0xFFC03190 /* TX Frame Delayed Due To Busy Count */
|
|
|
|
|
#define EMAC_TXC_LATECL 0xFFC03194 /* Late TX Collisions Count */
|
|
|
|
|
#define EMAC_TXC_XS_COL 0xFFC03198 /* TX Frame Failed Due To Excessive Collisions Count */
|
|
|
|
|
#define EMAC_TXC_DMAUND 0xFFC0319C /* Internal MAC Sublayer Error TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_CRSERR 0xFFC031A0 /* Carrier Sense Deasserted During TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_UNICST 0xFFC031A4 /* Unicast TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_MULTI 0xFFC031A8 /* Multicast TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_BROAD 0xFFC031AC /* Broadcast TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_XS_DFR 0xFFC031B0 /* TX Frames With Excessive Deferral Count */
|
|
|
|
|
#define EMAC_TXC_MACCTL 0xFFC031B4 /* MAC Control TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_ALLFRM 0xFFC031B8 /* Overall TX Frame Count */
|
|
|
|
|
#define EMAC_TXC_ALLOCT 0xFFC031BC /* Overall TX Octet Count */
|
|
|
|
|
#define EMAC_TXC_EQ64 0xFFC031C0 /* Good TX Frame Count - Byte Count x = 64 */
|
|
|
|
|
#define EMAC_TXC_LT128 0xFFC031C4 /* Good TX Frame Count - Byte Count 64 <= x < 128 */
|
|
|
|
|
#define EMAC_TXC_LT256 0xFFC031C8 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
|
|
|
|
|
#define EMAC_TXC_LT512 0xFFC031CC /* Good TX Frame Count - Byte Count 256 <= x < 512 */
|
|
|
|
|
#define EMAC_TXC_LT1024 0xFFC031D0 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
|
|
|
|
|
#define EMAC_TXC_GE1024 0xFFC031D4 /* Good TX Frame Count - Byte Count x >= 1024 */
|
|
|
|
|
#define EMAC_TXC_ABORT 0xFFC031D8 /* Total TX Frames Aborted Count */
|
|
|
|
|
|
|
|
|
|
/* Listing for IEEE-Supported Count Registers */
|
|
|
|
|
#define FramesReceivedOK EMAC_RXC_OK /* RX Frame Successful Count */
|
|
|
|
|
#define FrameCheckSequenceErrors EMAC_RXC_FCS /* RX Frame FCS Failure Count */
|
|
|
|
|
#define AlignmentErrors EMAC_RXC_ALIGN /* RX Alignment Error Count */
|
|
|
|
|
#define OctetsReceivedOK EMAC_RXC_OCTET /* RX Octets Successfully Received Count */
|
|
|
|
|
#define FramesLostDueToIntMACRcvError EMAC_RXC_DMAOVF /* Internal MAC Sublayer Error RX Frame Count */
|
|
|
|
|
#define UnicastFramesReceivedOK EMAC_RXC_UNICST /* Unicast RX Frame Count */
|
|
|
|
|
#define MulticastFramesReceivedOK EMAC_RXC_MULTI /* Multicast RX Frame Count */
|
|
|
|
|
#define BroadcastFramesReceivedOK EMAC_RXC_BROAD /* Broadcast RX Frame Count */
|
|
|
|
|
#define InRangeLengthErrors EMAC_RXC_LNERRI /* RX Frame In Range Error Count */
|
|
|
|
|
#define OutOfRangeLengthField EMAC_RXC_LNERRO /* RX Frame Out Of Range Error Count */
|
|
|
|
|
#define FrameTooLongErrors EMAC_RXC_LONG /* RX Frame Too Long Count */
|
|
|
|
|
#define MACControlFramesReceived EMAC_RXC_MACCTL /* MAC Control RX Frame Count */
|
|
|
|
|
#define UnsupportedOpcodesReceived EMAC_RXC_OPCODE /* Unsupported Op-Code RX Frame Count */
|
|
|
|
|
#define PAUSEMACCtrlFramesReceived EMAC_RXC_PAUSE /* MAC Control Pause RX Frame Count */
|
|
|
|
|
#define FramesReceivedAll EMAC_RXC_ALLFRM /* Overall RX Frame Count */
|
|
|
|
|
#define OctetsReceivedAll EMAC_RXC_ALLOCT /* Overall RX Octet Count */
|
|
|
|
|
#define TypedFramesReceived EMAC_RXC_TYPED /* Type/Length Consistent RX Frame Count */
|
|
|
|
|
#define FramesLenLt64Received EMAC_RXC_SHORT /* RX Frame Fragment Count - Byte Count x < 64 */
|
|
|
|
|
#define FramesLenEq64Received EMAC_RXC_EQ64 /* Good RX Frame Count - Byte Count x = 64 */
|
|
|
|
|
#define FramesLen65_127Received EMAC_RXC_LT128 /* Good RX Frame Count - Byte Count 64 <= x < 128 */
|
|
|
|
|
#define FramesLen128_255Received EMAC_RXC_LT256 /* Good RX Frame Count - Byte Count 128 <= x < 256 */
|
|
|
|
|
#define FramesLen256_511Received EMAC_RXC_LT512 /* Good RX Frame Count - Byte Count 256 <= x < 512 */
|
|
|
|
|
#define FramesLen512_1023Received EMAC_RXC_LT1024 /* Good RX Frame Count - Byte Count 512 <= x < 1024 */
|
|
|
|
|
#define FramesLen1024_MaxReceived EMAC_RXC_GE1024 /* Good RX Frame Count - Byte Count x >= 1024 */
|
|
|
|
|
|
|
|
|
|
#define FramesTransmittedOK EMAC_TXC_OK /* TX Frame Successful Count */
|
|
|
|
|
#define SingleCollisionFrames EMAC_TXC_1COL /* TX Frames Successful After Single Collision Count */
|
|
|
|
|
#define MultipleCollisionFrames EMAC_TXC_GT1COL /* TX Frames Successful After Multiple Collisions Count */
|
|
|
|
|
#define OctetsTransmittedOK EMAC_TXC_OCTET /* TX Octets Successfully Received Count */
|
|
|
|
|
#define FramesWithDeferredXmissions EMAC_TXC_DEFER /* TX Frame Delayed Due To Busy Count */
|
|
|
|
|
#define LateCollisions EMAC_TXC_LATECL /* Late TX Collisions Count */
|
|
|
|
|
#define FramesAbortedDueToXSColls EMAC_TXC_XS_COL /* TX Frame Failed Due To Excessive Collisions Count */
|
|
|
|
|
#define FramesLostDueToIntMacXmitError EMAC_TXC_DMAUND /* Internal MAC Sublayer Error TX Frame Count */
|
|
|
|
|
#define CarrierSenseErrors EMAC_TXC_CRSERR /* Carrier Sense Deasserted During TX Frame Count */
|
|
|
|
|
#define UnicastFramesXmittedOK EMAC_TXC_UNICST /* Unicast TX Frame Count */
|
|
|
|
|
#define MulticastFramesXmittedOK EMAC_TXC_MULTI /* Multicast TX Frame Count */
|
|
|
|
|
#define BroadcastFramesXmittedOK EMAC_TXC_BROAD /* Broadcast TX Frame Count */
|
|
|
|
|
#define FramesWithExcessiveDeferral EMAC_TXC_XS_DFR /* TX Frames With Excessive Deferral Count */
|
|
|
|
|
#define MACControlFramesTransmitted EMAC_TXC_MACCTL /* MAC Control TX Frame Count */
|
|
|
|
|
#define FramesTransmittedAll EMAC_TXC_ALLFRM /* Overall TX Frame Count */
|
|
|
|
|
#define OctetsTransmittedAll EMAC_TXC_ALLOCT /* Overall TX Octet Count */
|
|
|
|
|
#define FramesLenEq64Transmitted EMAC_TXC_EQ64 /* Good TX Frame Count - Byte Count x = 64 */
|
|
|
|
|
#define FramesLen65_127Transmitted EMAC_TXC_LT128 /* Good TX Frame Count - Byte Count 64 <= x < 128 */
|
|
|
|
|
#define FramesLen128_255Transmitted EMAC_TXC_LT256 /* Good TX Frame Count - Byte Count 128 <= x < 256 */
|
|
|
|
|
#define FramesLen256_511Transmitted EMAC_TXC_LT512 /* Good TX Frame Count - Byte Count 256 <= x < 512 */
|
|
|
|
|
#define FramesLen512_1023Transmitted EMAC_TXC_LT1024 /* Good TX Frame Count - Byte Count 512 <= x < 1024 */
|
|
|
|
|
#define FramesLen1024_MaxTransmitted EMAC_TXC_GE1024 /* Good TX Frame Count - Byte Count x >= 1024 */
|
|
|
|
|
#define TxAbortedFrames EMAC_TXC_ABORT /* Total TX Frames Aborted Count */
|
|
|
|
|
|
|
|
|
|
/***********************************************************************************
|
|
|
|
|
** System MMR Register Bits And Macros
|
|
|
|
|
**
|
|
|
|
|
** Disclaimer: All macros are intended to make C and Assembly code more readable.
|
|
|
|
|
** Use these macros carefully, as any that do left shifts for field
|
|
|
|
|
** depositing will result in the lower order bits being destroyed. Any
|
|
|
|
|
** macro that shifts left to properly position the bit-field should be
|
|
|
|
|
** used as part of an OR to initialize a register and NOT as a dynamic
|
|
|
|
|
** modifier UNLESS the lower order bits are saved and ORed back in when
|
|
|
|
|
** the macro is used.
|
|
|
|
|
*************************************************************************************/
|
|
|
|
|
/************************ ETHERNET 10/100 CONTROLLER MASKS ************************/
|
|
|
|
|
/* EMAC_OPMODE Masks */
|
|
|
|
|
#define RE 0x00000001 /* Receiver Enable */
|
|
|
|
|
#define ASTP 0x00000002 /* Enable Automatic Pad Stripping On RX Frames */
|
|
|
|
|
#define HU 0x00000010 /* Hash Filter Unicast Address */
|
|
|
|
|
#define HM 0x00000020 /* Hash Filter Multicast Address */
|
|
|
|
|
#define PAM 0x00000040 /* Pass-All-Multicast Mode Enable */
|
|
|
|
|
#define PR 0x00000080 /* Promiscuous Mode Enable */
|
|
|
|
|
#define IFE 0x00000100 /* Inverse Filtering Enable */
|
|
|
|
|
#define DBF 0x00000200 /* Disable Broadcast Frame Reception */
|
|
|
|
|
#define PBF 0x00000400 /* Pass Bad Frames Enable */
|
|
|
|
|
#define PSF 0x00000800 /* Pass Short Frames Enable */
|
|
|
|
|
#define RAF 0x00001000 /* Receive-All Mode */
|
|
|
|
|
#define TE 0x00010000 /* Transmitter Enable */
|
|
|
|
|
#define DTXPAD 0x00020000 /* Disable Automatic TX Padding */
|
|
|
|
|
#define DTXCRC 0x00040000 /* Disable Automatic TX CRC Generation */
|
|
|
|
|
#define DC 0x00080000 /* Deferral Check */
|
|
|
|
|
#define BOLMT 0x00300000 /* Back-Off Limit */
|
|
|
|
|
#define BOLMT_10 0x00000000 /* 10-bit range */
|
|
|
|
|
#define BOLMT_8 0x00100000 /* 8-bit range */
|
|
|
|
|
#define BOLMT_4 0x00200000 /* 4-bit range */
|
|
|
|
|
#define BOLMT_1 0x00300000 /* 1-bit range */
|
|
|
|
|
#define DRTY 0x00400000 /* Disable TX Retry On Collision */
|
|
|
|
|
#define LCTRE 0x00800000 /* Enable TX Retry On Late Collision */
|
|
|
|
|
#define RMII 0x01000000 /* RMII/MII* Mode */
|
|
|
|
|
#define RMII_10 0x02000000 /* Speed Select for RMII Port (10MBit/100MBit*) */
|
|
|
|
|
#define FDMODE 0x04000000 /* Duplex Mode Enable (Full/Half*) */
|
|
|
|
|
#define LB 0x08000000 /* Internal Loopback Enable */
|
|
|
|
|
#define DRO 0x10000000 /* Disable Receive Own Frames (Half-Duplex Mode) */
|
|
|
|
|
|
|
|
|
|
/* EMAC_STAADD Masks */
|
|
|
|
|
#define STABUSY 0x00000001 /* Initiate Station Mgt Reg Access / STA Busy Stat */
|
|
|
|
|
#define STAOP 0x00000002 /* Station Management Operation Code (Write/Read*) */
|
|
|
|
|
#define STADISPRE 0x00000004 /* Disable Preamble Generation */
|
|
|
|
|
#define STAIE 0x00000008 /* Station Mgt. Transfer Done Interrupt Enable */
|
|
|
|
|
#define REGAD 0x000007C0 /* STA Register Address */
|
|
|
|
|
#define PHYAD 0x0000F800 /* PHY Device Address */
|
|
|
|
|
|
|
|
|
|
#define SET_REGAD(x) (((x)&0x1F)<< 6 ) /* Set STA Register Address */
|
|
|
|
|
#define SET_PHYAD(x) (((x)&0x1F)<< 11 ) /* Set PHY Device Address */
|
|
|
|
|
|
|
|
|
|
/* EMAC_STADAT Mask */
|
|
|
|
|
#define STADATA 0x0000FFFF /* Station Management Data */
|
|
|
|
|
|
|
|
|
|
/* EMAC_FLC Masks */
|
|
|
|
|
#define FLCBUSY 0x00000001 /* Send Flow Ctrl Frame / Flow Ctrl Busy Status */
|
|
|
|
|
#define FLCE 0x00000002 /* Flow Control Enable */
|
|
|
|
|
#define PCF 0x00000004 /* Pass Control Frames */
|
|
|
|
|
#define BKPRSEN 0x00000008 /* Enable Backpressure */
|
|
|
|
|
#define FLCPAUSE 0xFFFF0000 /* Pause Time */
|
|
|
|
|
|
|
|
|
|
#define SET_FLCPAUSE(x) (((x)&0xFFFF)<< 16) /* Set Pause Time */
|
|
|
|
|
|
|
|
|
|
/* EMAC_WKUP_CTL Masks */
|
|
|
|
|
#define CAPWKFRM 0x00000001 /* Capture Wake-Up Frames */
|
|
|
|
|
#define MPKE 0x00000002 /* Magic Packet Enable */
|
|
|
|
|
#define RWKE 0x00000004 /* Remote Wake-Up Frame Enable */
|
|
|
|
|
#define GUWKE 0x00000008 /* Global Unicast Wake Enable */
|
|
|
|
|
#define MPKS 0x00000020 /* Magic Packet Received Status */
|
|
|
|
|
#define RWKS 0x00000F00 /* Wake-Up Frame Received Status, Filters 3:0 */
|
|
|
|
|
|
|
|
|
|
/* EMAC_WKUP_FFCMD Masks */
|
|
|
|
|
#define WF0_E 0x00000001 /* Enable Wake-Up Filter 0 */
|
|
|
|
|
#define WF0_T 0x00000008 /* Wake-Up Filter 0 Addr Type (Multicast/Unicast*) */
|
|
|
|
|
#define WF1_E 0x00000100 /* Enable Wake-Up Filter 1 */
|
|
|
|
|
#define WF1_T 0x00000800 /* Wake-Up Filter 1 Addr Type (Multicast/Unicast*) */
|
|
|
|
|
#define WF2_E 0x00010000 /* Enable Wake-Up Filter 2 */
|
|
|
|
|
#define WF2_T 0x00080000 /* Wake-Up Filter 2 Addr Type (Multicast/Unicast*) */
|
|
|
|
|
#define WF3_E 0x01000000 /* Enable Wake-Up Filter 3 */
|
|
|
|
|
#define WF3_T 0x08000000 /* Wake-Up Filter 3 Addr Type (Multicast/Unicast*) */
|
|
|
|
|
|
|
|
|
|
/* EMAC_WKUP_FFOFF Masks */
|
|
|
|
|
#define WF0_OFF 0x000000FF /* Wake-Up Filter 0 Pattern Offset */
|
|
|
|
|
#define WF1_OFF 0x0000FF00 /* Wake-Up Filter 1 Pattern Offset */
|
|
|
|
|
#define WF2_OFF 0x00FF0000 /* Wake-Up Filter 2 Pattern Offset */
|
|
|
|
|
#define WF3_OFF 0xFF000000 /* Wake-Up Filter 3 Pattern Offset */
|
|
|
|
|
|
|
|
|
|
#define SET_WF0_OFF(x) (((x)&0xFF)<< 0 ) /* Set Wake-Up Filter 0 Byte Offset */
|
|
|
|
|
#define SET_WF1_OFF(x) (((x)&0xFF)<< 8 ) /* Set Wake-Up Filter 1 Byte Offset */
|
|
|
|
|
#define SET_WF2_OFF(x) (((x)&0xFF)<< 16 ) /* Set Wake-Up Filter 2 Byte Offset */
|
|
|
|
|
#define SET_WF3_OFF(x) (((x)&0xFF)<< 24 ) /* Set Wake-Up Filter 3 Byte Offset */
|
|
|
|
|
/* Set ALL Offsets */
|
|
|
|
|
#define SET_WF_OFFS(x0,x1,x2,x3) (SET_WF0_OFF((x0))|SET_WF1_OFF((x1))|SET_WF2_OFF((x2))|SET_WF3_OFF((x3)))
|
|
|
|
|
|
|
|
|
|
/* EMAC_WKUP_FFCRC0 Masks */
|
|
|
|
|
#define WF0_CRC 0x0000FFFF /* Wake-Up Filter 0 Pattern CRC */
|
|
|
|
|
#define WF1_CRC 0xFFFF0000 /* Wake-Up Filter 1 Pattern CRC */
|
|
|
|
|
|
|
|
|
|
#define SET_WF0_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 0 Target CRC */
|
|
|
|
|
#define SET_WF1_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 1 Target CRC */
|
|
|
|
|
|
|
|
|
|
/* EMAC_WKUP_FFCRC1 Masks */
|
|
|
|
|
#define WF2_CRC 0x0000FFFF /* Wake-Up Filter 2 Pattern CRC */
|
|
|
|
|
#define WF3_CRC 0xFFFF0000 /* Wake-Up Filter 3 Pattern CRC */
|
|
|
|
|
|
|
|
|
|
#define SET_WF2_CRC(x) (((x)&0xFFFF)<< 0 ) /* Set Wake-Up Filter 2 Target CRC */
|
|
|
|
|
#define SET_WF3_CRC(x) (((x)&0xFFFF)<< 16 ) /* Set Wake-Up Filter 3 Target CRC */
|
|
|
|
|
|
|
|
|
|
/* EMAC_SYSCTL Masks */
|
|
|
|
|
#define PHYIE 0x00000001 /* PHY_INT Interrupt Enable */
|
|
|
|
|
#define RXDWA 0x00000002 /* Receive Frame DMA Word Alignment (Odd/Even*) */
|
|
|
|
|
#define RXCKS 0x00000004 /* Enable RX Frame TCP/UDP Checksum Computation */
|
2008-07-15 12:08:50 +08:00
|
|
|
#define TXDWA 0x00000010 /* Transmit Frame DMA Word Alignment (Odd/Even*) */
|
blackfin architecture
This adds support for the Analog Devices Blackfin processor architecture, and
currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561
(Dual Core) devices, with a variety of development platforms including those
avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP,
BF561-EZKIT), and Bluetechnix! Tinyboards.
The Blackfin architecture was jointly developed by Intel and Analog Devices
Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in
December of 2000. Since then ADI has put this core into its Blackfin
processor family of devices. The Blackfin core has the advantages of a clean,
orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC
(Multiply/Accumulate), state-of-the-art signal processing engine and
single-instruction, multiple-data (SIMD) multimedia capabilities into a single
instruction-set architecture.
The Blackfin architecture, including the instruction set, is described by the
ADSP-BF53x/BF56x Blackfin Processor Programming Reference
http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf
The Blackfin processor is already supported by major releases of gcc, and
there are binary and source rpms/tarballs for many architectures at:
http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete
documentation, including "getting started" guides available at:
http://docs.blackfin.uclinux.org/ which provides links to the sources and
patches you will need in order to set up a cross-compiling environment for
bfin-linux-uclibc
This patch, as well as the other patches (toolchain, distribution,
uClibc) are actively supported by Analog Devices Inc, at:
http://blackfin.uclinux.org/
We have tested this on LTP, and our test plan (including pass/fails) can
be found at:
http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel
[m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files]
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Aubrey Li <aubrey.li@analog.com>
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 05:50:22 +08:00
|
|
|
#define MDCDIV 0x00003F00 /* SCLK:MDC Clock Divisor [MDC=SCLK/(2*(N+1))] */
|
|
|
|
|
|
|
|
|
|
#define SET_MDCDIV(x) (((x)&0x3F)<< 8) /* Set MDC Clock Divisor */
|
|
|
|
|
|
|
|
|
|
/* EMAC_SYSTAT Masks */
|
|
|
|
|
#define PHYINT 0x00000001 /* PHY_INT Interrupt Status */
|
|
|
|
|
#define MMCINT 0x00000002 /* MMC Counter Interrupt Status */
|
|
|
|
|
#define RXFSINT 0x00000004 /* RX Frame-Status Interrupt Status */
|
|
|
|
|
#define TXFSINT 0x00000008 /* TX Frame-Status Interrupt Status */
|
|
|
|
|
#define WAKEDET 0x00000010 /* Wake-Up Detected Status */
|
|
|
|
|
#define RXDMAERR 0x00000020 /* RX DMA Direction Error Status */
|
|
|
|
|
#define TXDMAERR 0x00000040 /* TX DMA Direction Error Status */
|
|
|
|
|
#define STMDONE 0x00000080 /* Station Mgt. Transfer Done Interrupt Status */
|
|
|
|
|
|
|
|
|
|
/* EMAC_RX_STAT, EMAC_RX_STKY, and EMAC_RX_IRQE Masks */
|
|
|
|
|
#define RX_FRLEN 0x000007FF /* Frame Length In Bytes */
|
|
|
|
|
#define RX_COMP 0x00001000 /* RX Frame Complete */
|
|
|
|
|
#define RX_OK 0x00002000 /* RX Frame Received With No Errors */
|
|
|
|
|
#define RX_LONG 0x00004000 /* RX Frame Too Long Error */
|
|
|
|
|
#define RX_ALIGN 0x00008000 /* RX Frame Alignment Error */
|
|
|
|
|
#define RX_CRC 0x00010000 /* RX Frame CRC Error */
|
|
|
|
|
#define RX_LEN 0x00020000 /* RX Frame Length Error */
|
|
|
|
|
#define RX_FRAG 0x00040000 /* RX Frame Fragment Error */
|
|
|
|
|
#define RX_ADDR 0x00080000 /* RX Frame Address Filter Failed Error */
|
|
|
|
|
#define RX_DMAO 0x00100000 /* RX Frame DMA Overrun Error */
|
|
|
|
|
#define RX_PHY 0x00200000 /* RX Frame PHY Error */
|
|
|
|
|
#define RX_LATE 0x00400000 /* RX Frame Late Collision Error */
|
|
|
|
|
#define RX_RANGE 0x00800000 /* RX Frame Length Field Out of Range Error */
|
|
|
|
|
#define RX_MULTI 0x01000000 /* RX Multicast Frame Indicator */
|
|
|
|
|
#define RX_BROAD 0x02000000 /* RX Broadcast Frame Indicator */
|
|
|
|
|
#define RX_CTL 0x04000000 /* RX Control Frame Indicator */
|
|
|
|
|
#define RX_UCTL 0x08000000 /* Unsupported RX Control Frame Indicator */
|
|
|
|
|
#define RX_TYPE 0x10000000 /* RX Typed Frame Indicator */
|
|
|
|
|
#define RX_VLAN1 0x20000000 /* RX VLAN1 Frame Indicator */
|
|
|
|
|
#define RX_VLAN2 0x40000000 /* RX VLAN2 Frame Indicator */
|
|
|
|
|
#define RX_ACCEPT 0x80000000 /* RX Frame Accepted Indicator */
|
|
|
|
|
|
|
|
|
|
/* EMAC_TX_STAT, EMAC_TX_STKY, and EMAC_TX_IRQE Masks */
|
|
|
|
|
#define TX_COMP 0x00000001 /* TX Frame Complete */
|
|
|
|
|
#define TX_OK 0x00000002 /* TX Frame Sent With No Errors */
|
|
|
|
|
#define TX_ECOLL 0x00000004 /* TX Frame Excessive Collision Error */
|
|
|
|
|
#define TX_LATE 0x00000008 /* TX Frame Late Collision Error */
|
|
|
|
|
#define TX_DMAU 0x00000010 /* TX Frame DMA Underrun Error (STAT) */
|
|
|
|
|
#define TX_MACE 0x00000010 /* Internal MAC Error Detected (STKY and IRQE) */
|
|
|
|
|
#define TX_EDEFER 0x00000020 /* TX Frame Excessive Deferral Error */
|
|
|
|
|
#define TX_BROAD 0x00000040 /* TX Broadcast Frame Indicator */
|
|
|
|
|
#define TX_MULTI 0x00000080 /* TX Multicast Frame Indicator */
|
|
|
|
|
#define TX_CCNT 0x00000F00 /* TX Frame Collision Count */
|
|
|
|
|
#define TX_DEFER 0x00001000 /* TX Frame Deferred Indicator */
|
|
|
|
|
#define TX_CRS 0x00002000 /* TX Frame Carrier Sense Not Asserted Error */
|
|
|
|
|
#define TX_LOSS 0x00004000 /* TX Frame Carrier Lost During TX Error */
|
|
|
|
|
#define TX_RETRY 0x00008000 /* TX Frame Successful After Retry */
|
|
|
|
|
#define TX_FRLEN 0x07FF0000 /* TX Frame Length (Bytes) */
|
|
|
|
|
|
|
|
|
|
/* EMAC_MMC_CTL Masks */
|
|
|
|
|
#define RSTC 0x00000001 /* Reset All Counters */
|
|
|
|
|
#define CROLL 0x00000002 /* Counter Roll-Over Enable */
|
|
|
|
|
#define CCOR 0x00000004 /* Counter Clear-On-Read Mode Enable */
|
|
|
|
|
#define MMCE 0x00000008 /* Enable MMC Counter Operation */
|
|
|
|
|
|
|
|
|
|
/* EMAC_MMC_RIRQS and EMAC_MMC_RIRQE Masks */
|
|
|
|
|
#define RX_OK_CNT 0x00000001 /* RX Frames Received With No Errors */
|
|
|
|
|
#define RX_FCS_CNT 0x00000002 /* RX Frames W/Frame Check Sequence Errors */
|
|
|
|
|
#define RX_ALIGN_CNT 0x00000004 /* RX Frames With Alignment Errors */
|
|
|
|
|
#define RX_OCTET_CNT 0x00000008 /* RX Octets Received OK */
|
|
|
|
|
#define RX_LOST_CNT 0x00000010 /* RX Frames Lost Due To Internal MAC RX Error */
|
|
|
|
|
#define RX_UNI_CNT 0x00000020 /* Unicast RX Frames Received OK */
|
|
|
|
|
#define RX_MULTI_CNT 0x00000040 /* Multicast RX Frames Received OK */
|
|
|
|
|
#define RX_BROAD_CNT 0x00000080 /* Broadcast RX Frames Received OK */
|
|
|
|
|
#define RX_IRL_CNT 0x00000100 /* RX Frames With In-Range Length Errors */
|
|
|
|
|
#define RX_ORL_CNT 0x00000200 /* RX Frames With Out-Of-Range Length Errors */
|
|
|
|
|
#define RX_LONG_CNT 0x00000400 /* RX Frames With Frame Too Long Errors */
|
|
|
|
|
#define RX_MACCTL_CNT 0x00000800 /* MAC Control RX Frames Received */
|
|
|
|
|
#define RX_OPCODE_CTL 0x00001000 /* Unsupported Op-Code RX Frames Received */
|
|
|
|
|
#define RX_PAUSE_CNT 0x00002000 /* PAUSEMAC Control RX Frames Received */
|
|
|
|
|
#define RX_ALLF_CNT 0x00004000 /* All RX Frames Received */
|
|
|
|
|
#define RX_ALLO_CNT 0x00008000 /* All RX Octets Received */
|
|
|
|
|
#define RX_TYPED_CNT 0x00010000 /* Typed RX Frames Received */
|
|
|
|
|
#define RX_SHORT_CNT 0x00020000 /* RX Frame Fragments (< 64 Bytes) Received */
|
|
|
|
|
#define RX_EQ64_CNT 0x00040000 /* 64-Byte RX Frames Received */
|
|
|
|
|
#define RX_LT128_CNT 0x00080000 /* 65-127-Byte RX Frames Received */
|
|
|
|
|
#define RX_LT256_CNT 0x00100000 /* 128-255-Byte RX Frames Received */
|
|
|
|
|
#define RX_LT512_CNT 0x00200000 /* 256-511-Byte RX Frames Received */
|
|
|
|
|
#define RX_LT1024_CNT 0x00400000 /* 512-1023-Byte RX Frames Received */
|
|
|
|
|
#define RX_GE1024_CNT 0x00800000 /* 1024-Max-Byte RX Frames Received */
|
|
|
|
|
|
|
|
|
|
/* EMAC_MMC_TIRQS and EMAC_MMC_TIRQE Masks */
|
|
|
|
|
#define TX_OK_CNT 0x00000001 /* TX Frames Sent OK */
|
|
|
|
|
#define TX_SCOLL_CNT 0x00000002 /* TX Frames With Single Collisions */
|
|
|
|
|
#define TX_MCOLL_CNT 0x00000004 /* TX Frames With Multiple Collisions */
|
|
|
|
|
#define TX_OCTET_CNT 0x00000008 /* TX Octets Sent OK */
|
|
|
|
|
#define TX_DEFER_CNT 0x00000010 /* TX Frames With Deferred Transmission */
|
|
|
|
|
#define TX_LATE_CNT 0x00000020 /* TX Frames With Late Collisions */
|
|
|
|
|
#define TX_ABORTC_CNT 0x00000040 /* TX Frames Aborted Due To Excess Collisions */
|
|
|
|
|
#define TX_LOST_CNT 0x00000080 /* TX Frames Lost Due To Internal MAC TX Error */
|
|
|
|
|
#define TX_CRS_CNT 0x00000100 /* TX Frames With Carrier Sense Errors */
|
|
|
|
|
#define TX_UNI_CNT 0x00000200 /* Unicast TX Frames Sent */
|
|
|
|
|
#define TX_MULTI_CNT 0x00000400 /* Multicast TX Frames Sent */
|
|
|
|
|
#define TX_BROAD_CNT 0x00000800 /* Broadcast TX Frames Sent */
|
|
|
|
|
#define TX_EXDEF_CTL 0x00001000 /* TX Frames With Excessive Deferral */
|
|
|
|
|
#define TX_MACCTL_CNT 0x00002000 /* MAC Control TX Frames Sent */
|
|
|
|
|
#define TX_ALLF_CNT 0x00004000 /* All TX Frames Sent */
|
|
|
|
|
#define TX_ALLO_CNT 0x00008000 /* All TX Octets Sent */
|
|
|
|
|
#define TX_EQ64_CNT 0x00010000 /* 64-Byte TX Frames Sent */
|
|
|
|
|
#define TX_LT128_CNT 0x00020000 /* 65-127-Byte TX Frames Sent */
|
|
|
|
|
#define TX_LT256_CNT 0x00040000 /* 128-255-Byte TX Frames Sent */
|
|
|
|
|
#define TX_LT512_CNT 0x00080000 /* 256-511-Byte TX Frames Sent */
|
|
|
|
|
#define TX_LT1024_CNT 0x00100000 /* 512-1023-Byte TX Frames Sent */
|
|
|
|
|
#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
|
|
|
|
|
#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
|
|
|
|
|
|
|
|
|
|
#endif /* _DEF_BF537_H */
|