linux/net/sunrpc/xprtrdma/backchannel.c

380 lines
9.9 KiB
C
Raw Normal View History

/*
* Copyright (c) 2015 Oracle. All rights reserved.
*
* Support for backward direction RPCs on RPC/RDMA.
*/
#include <linux/module.h>
#include <linux/sunrpc/xprt.h>
#include <linux/sunrpc/svc.h>
#include <linux/sunrpc/svc_xprt.h>
#include "xprt_rdma.h"
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
# define RPCDBG_FACILITY RPCDBG_TRANS
#endif
#undef RPCRDMA_BACKCHANNEL_DEBUG
static void rpcrdma_bc_free_rqst(struct rpcrdma_xprt *r_xprt,
struct rpc_rqst *rqst)
{
struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
struct rpcrdma_req *req = rpcr_to_rdmar(rqst);
spin_lock(&buf->rb_reqslock);
list_del(&req->rl_all);
spin_unlock(&buf->rb_reqslock);
rpcrdma_destroy_req(req);
kfree(rqst);
}
static int rpcrdma_bc_setup_rqst(struct rpcrdma_xprt *r_xprt,
struct rpc_rqst *rqst)
{
struct rpcrdma_regbuf *rb;
struct rpcrdma_req *req;
size_t size;
req = rpcrdma_create_req(r_xprt);
if (IS_ERR(req))
return PTR_ERR(req);
req->rl_backchannel = true;
rb = rpcrdma_alloc_regbuf(RPCRDMA_HDRBUF_SIZE,
DMA_TO_DEVICE, GFP_KERNEL);
if (IS_ERR(rb))
goto out_fail;
req->rl_rdmabuf = rb;
size = r_xprt->rx_data.inline_rsize;
rb = rpcrdma_alloc_regbuf(size, DMA_TO_DEVICE, GFP_KERNEL);
if (IS_ERR(rb))
goto out_fail;
req->rl_sendbuf = rb;
xdr_buf_init(&rqst->rq_snd_buf, rb->rg_base, size);
rpcrdma_set_xprtdata(rqst, req);
return 0;
out_fail:
rpcrdma_bc_free_rqst(r_xprt, rqst);
return -ENOMEM;
}
/* Allocate and add receive buffers to the rpcrdma_buffer's
* existing list of rep's. These are released when the
* transport is destroyed.
*/
static int rpcrdma_bc_setup_reps(struct rpcrdma_xprt *r_xprt,
unsigned int count)
{
struct rpcrdma_rep *rep;
int rc = 0;
while (count--) {
rep = rpcrdma_create_rep(r_xprt);
if (IS_ERR(rep)) {
pr_err("RPC: %s: reply buffer alloc failed\n",
__func__);
rc = PTR_ERR(rep);
break;
}
rpcrdma_recv_buffer_put(rep);
}
return rc;
}
/**
* xprt_rdma_bc_setup - Pre-allocate resources for handling backchannel requests
* @xprt: transport associated with these backchannel resources
* @reqs: number of concurrent incoming requests to expect
*
* Returns 0 on success; otherwise a negative errno
*/
int xprt_rdma_bc_setup(struct rpc_xprt *xprt, unsigned int reqs)
{
struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
struct rpcrdma_buffer *buffer = &r_xprt->rx_buf;
struct rpc_rqst *rqst;
unsigned int i;
int rc;
/* The backchannel reply path returns each rpc_rqst to the
* bc_pa_list _after_ the reply is sent. If the server is
* faster than the client, it can send another backward
* direction request before the rpc_rqst is returned to the
* list. The client rejects the request in this case.
*
* Twice as many rpc_rqsts are prepared to ensure there is
* always an rpc_rqst available as soon as a reply is sent.
*/
if (reqs > RPCRDMA_BACKWARD_WRS >> 1)
goto out_err;
for (i = 0; i < (reqs << 1); i++) {
rqst = kzalloc(sizeof(*rqst), GFP_KERNEL);
if (!rqst) {
pr_err("RPC: %s: Failed to create bc rpc_rqst\n",
__func__);
goto out_free;
}
dprintk("RPC: %s: new rqst %p\n", __func__, rqst);
rqst->rq_xprt = &r_xprt->rx_xprt;
INIT_LIST_HEAD(&rqst->rq_list);
INIT_LIST_HEAD(&rqst->rq_bc_list);
if (rpcrdma_bc_setup_rqst(r_xprt, rqst))
goto out_free;
spin_lock_bh(&xprt->bc_pa_lock);
list_add(&rqst->rq_bc_pa_list, &xprt->bc_pa_list);
spin_unlock_bh(&xprt->bc_pa_lock);
}
rc = rpcrdma_bc_setup_reps(r_xprt, reqs);
if (rc)
goto out_free;
rc = rpcrdma_ep_post_extra_recv(r_xprt, reqs);
if (rc)
goto out_free;
buffer->rb_bc_srv_max_requests = reqs;
request_module("svcrdma");
return 0;
out_free:
xprt_rdma_bc_destroy(xprt, reqs);
out_err:
pr_err("RPC: %s: setup backchannel transport failed\n", __func__);
return -ENOMEM;
}
/**
* xprt_rdma_bc_up - Create transport endpoint for backchannel service
* @serv: server endpoint
* @net: network namespace
*
* The "xprt" is an implied argument: it supplies the name of the
* backchannel transport class.
*
* Returns zero on success, negative errno on failure
*/
int xprt_rdma_bc_up(struct svc_serv *serv, struct net *net)
{
int ret;
ret = svc_create_xprt(serv, "rdma-bc", net, PF_INET, 0, 0);
if (ret < 0)
return ret;
return 0;
}
/**
* xprt_rdma_bc_maxpayload - Return maximum backchannel message size
* @xprt: transport
*
* Returns maximum size, in bytes, of a backchannel message
*/
size_t xprt_rdma_bc_maxpayload(struct rpc_xprt *xprt)
{
struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
struct rpcrdma_create_data_internal *cdata = &r_xprt->rx_data;
size_t maxmsg;
maxmsg = min_t(unsigned int, cdata->inline_rsize, cdata->inline_wsize);
return maxmsg - RPCRDMA_HDRLEN_MIN;
}
/**
* rpcrdma_bc_marshal_reply - Send backwards direction reply
* @rqst: buffer containing RPC reply data
*
* Returns zero on success.
*/
int rpcrdma_bc_marshal_reply(struct rpc_rqst *rqst)
{
struct rpc_xprt *xprt = rqst->rq_xprt;
struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
struct rpcrdma_req *req = rpcr_to_rdmar(rqst);
struct rpcrdma_msg *headerp;
headerp = rdmab_to_msg(req->rl_rdmabuf);
headerp->rm_xid = rqst->rq_xid;
headerp->rm_vers = rpcrdma_version;
headerp->rm_credit =
cpu_to_be32(r_xprt->rx_buf.rb_bc_srv_max_requests);
headerp->rm_type = rdma_msg;
headerp->rm_body.rm_chunks[0] = xdr_zero;
headerp->rm_body.rm_chunks[1] = xdr_zero;
headerp->rm_body.rm_chunks[2] = xdr_zero;
xprtrdma: Use gathered Send for large inline messages An RPC Call message that is sent inline but that has a data payload (ie, one or more items in rq_snd_buf's page list) must be "pulled up:" - call_allocate has to reserve enough RPC Call buffer space to accommodate the data payload - call_transmit has to memcopy the rq_snd_buf's page list and tail into its head iovec before it is sent As the inline threshold is increased beyond its current 1KB default, however, this means data payloads of more than a few KB are copied by the host CPU. For example, if the inline threshold is increased just to 4KB, then NFS WRITE requests up to 4KB would involve a memcpy of the NFS WRITE's payload data into the RPC Call buffer. This is an undesirable amount of participation by the host CPU. The inline threshold may be much larger than 4KB in the future, after negotiation with a peer server. Instead of copying the components of rq_snd_buf into its head iovec, construct a gather list of these components, and send them all in place. The same approach is already used in the Linux server's RPC-over-RDMA reply path. This mechanism also eliminates the need for rpcrdma_tail_pullup, which is used to manage the XDR pad and trailing inline content when a Read list is present. This requires that the pages in rq_snd_buf's page list be DMA-mapped during marshaling, and unmapped when a data-bearing RPC is completed. This is slightly less efficient for very small I/O payloads, but significantly more efficient as data payload size and inline threshold increase past a kilobyte. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-09-15 22:57:24 +08:00
if (!rpcrdma_prepare_send_sges(&r_xprt->rx_ia, req, RPCRDMA_HDRLEN_MIN,
&rqst->rq_snd_buf, rpcrdma_noch))
return -EIO;
return 0;
}
/**
* xprt_rdma_bc_destroy - Release resources for handling backchannel requests
* @xprt: transport associated with these backchannel resources
* @reqs: number of incoming requests to destroy; ignored
*/
void xprt_rdma_bc_destroy(struct rpc_xprt *xprt, unsigned int reqs)
{
struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
struct rpc_rqst *rqst, *tmp;
spin_lock_bh(&xprt->bc_pa_lock);
list_for_each_entry_safe(rqst, tmp, &xprt->bc_pa_list, rq_bc_pa_list) {
list_del(&rqst->rq_bc_pa_list);
spin_unlock_bh(&xprt->bc_pa_lock);
rpcrdma_bc_free_rqst(r_xprt, rqst);
spin_lock_bh(&xprt->bc_pa_lock);
}
spin_unlock_bh(&xprt->bc_pa_lock);
}
/**
* xprt_rdma_bc_free_rqst - Release a backchannel rqst
* @rqst: request to release
*/
void xprt_rdma_bc_free_rqst(struct rpc_rqst *rqst)
{
struct rpc_xprt *xprt = rqst->rq_xprt;
dprintk("RPC: %s: freeing rqst %p (req %p)\n",
__func__, rqst, rpcr_to_rdmar(rqst));
smp_mb__before_atomic();
WARN_ON_ONCE(!test_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state));
clear_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state);
smp_mb__after_atomic();
spin_lock_bh(&xprt->bc_pa_lock);
list_add_tail(&rqst->rq_bc_pa_list, &xprt->bc_pa_list);
spin_unlock_bh(&xprt->bc_pa_lock);
}
/**
* rpcrdma_bc_receive_call - Handle a backward direction call
* @xprt: transport receiving the call
* @rep: receive buffer containing the call
*
* Called in the RPC reply handler, which runs in a tasklet.
* Be quick about it.
*
* Operational assumptions:
* o Backchannel credits are ignored, just as the NFS server
* forechannel currently does
* o The ULP manages a replay cache (eg, NFSv4.1 sessions).
* No replay detection is done at the transport level
*/
void rpcrdma_bc_receive_call(struct rpcrdma_xprt *r_xprt,
struct rpcrdma_rep *rep)
{
struct rpc_xprt *xprt = &r_xprt->rx_xprt;
struct rpcrdma_msg *headerp;
struct svc_serv *bc_serv;
struct rpcrdma_req *req;
struct rpc_rqst *rqst;
struct xdr_buf *buf;
size_t size;
__be32 *p;
headerp = rdmab_to_msg(rep->rr_rdmabuf);
#ifdef RPCRDMA_BACKCHANNEL_DEBUG
pr_info("RPC: %s: callback XID %08x, length=%u\n",
__func__, be32_to_cpu(headerp->rm_xid), rep->rr_len);
pr_info("RPC: %s: %*ph\n", __func__, rep->rr_len, headerp);
#endif
/* Sanity check:
* Need at least enough bytes for RPC/RDMA header, as code
* here references the header fields by array offset. Also,
* backward calls are always inline, so ensure there
* are some bytes beyond the RPC/RDMA header.
*/
if (rep->rr_len < RPCRDMA_HDRLEN_MIN + 24)
goto out_short;
p = (__be32 *)((unsigned char *)headerp + RPCRDMA_HDRLEN_MIN);
size = rep->rr_len - RPCRDMA_HDRLEN_MIN;
/* Grab a free bc rqst */
spin_lock(&xprt->bc_pa_lock);
if (list_empty(&xprt->bc_pa_list)) {
spin_unlock(&xprt->bc_pa_lock);
goto out_overflow;
}
rqst = list_first_entry(&xprt->bc_pa_list,
struct rpc_rqst, rq_bc_pa_list);
list_del(&rqst->rq_bc_pa_list);
spin_unlock(&xprt->bc_pa_lock);
dprintk("RPC: %s: using rqst %p\n", __func__, rqst);
/* Prepare rqst */
rqst->rq_reply_bytes_recvd = 0;
rqst->rq_bytes_sent = 0;
rqst->rq_xid = headerp->rm_xid;
rqst->rq_private_buf.len = size;
set_bit(RPC_BC_PA_IN_USE, &rqst->rq_bc_pa_state);
buf = &rqst->rq_rcv_buf;
memset(buf, 0, sizeof(*buf));
buf->head[0].iov_base = p;
buf->head[0].iov_len = size;
buf->len = size;
/* The receive buffer has to be hooked to the rpcrdma_req
* so that it can be reposted after the server is done
* parsing it but just before sending the backward
* direction reply.
*/
req = rpcr_to_rdmar(rqst);
dprintk("RPC: %s: attaching rep %p to req %p\n",
__func__, rep, req);
req->rl_reply = rep;
/* Defeat the retransmit detection logic in send_request */
req->rl_connect_cookie = 0;
/* Queue rqst for ULP's callback service */
bc_serv = xprt->bc_serv;
spin_lock(&bc_serv->sv_cb_lock);
list_add(&rqst->rq_bc_list, &bc_serv->sv_cb_list);
spin_unlock(&bc_serv->sv_cb_lock);
wake_up(&bc_serv->sv_cb_waitq);
r_xprt->rx_stats.bcall_count++;
return;
out_overflow:
pr_warn("RPC/RDMA backchannel overflow\n");
xprt_disconnect_done(xprt);
/* This receive buffer gets reposted automatically
* when the connection is re-established.
*/
return;
out_short:
pr_warn("RPC/RDMA short backward direction call\n");
if (rpcrdma_ep_post_recv(&r_xprt->rx_ia, rep))
xprt_disconnect_done(xprt);
else
pr_warn("RPC: %s: reposting rep %p\n",
__func__, rep);
}