linux/kernel/trace/ring_buffer_benchmark.c

498 lines
11 KiB
C
Raw Normal View History

ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
/*
* ring buffer tester and benchmark
*
* Copyright (C) 2009 Steven Rostedt <srostedt@redhat.com>
*/
#include <linux/ring_buffer.h>
#include <linux/completion.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/ktime.h>
#include <asm/local.h>
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
struct rb_page {
u64 ts;
local_t commit;
char data[4080];
};
/* run time and sleep time in seconds */
#define RUN_TIME 10ULL
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
#define SLEEP_TIME 10
/* number of events for writer to wake up the reader */
static int wakeup_interval = 100;
static int reader_finish;
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
static DECLARE_COMPLETION(read_start);
static DECLARE_COMPLETION(read_done);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
static struct ring_buffer *buffer;
static struct task_struct *producer;
static struct task_struct *consumer;
static unsigned long read;
static unsigned int disable_reader;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
module_param(disable_reader, uint, 0644);
MODULE_PARM_DESC(disable_reader, "only run producer");
static unsigned int write_iteration = 50;
ring-buffer: Add multiple iterations between benchmark timestamps The ring_buffer_benchmark does a gettimeofday after every write to the ring buffer in its measurements. This adds the overhead of the call to gettimeofday to the measurements and does not give an accurate picture of the length of time it takes to record a trace. This was first noticed with perf top: ------------------------------------------------------------------------------ PerfTop: 679 irqs/sec kernel:99.9% [1000Hz cpu-clock-msecs], (all, 4 CPUs) ------------------------------------------------------------------------------ samples pcnt kernel function _______ _____ _______________ 1673.00 - 27.8% : trace_clock_local 806.00 - 13.4% : do_gettimeofday 590.00 - 9.8% : rb_reserve_next_event 554.00 - 9.2% : native_read_tsc 431.00 - 7.2% : ring_buffer_lock_reserve 365.00 - 6.1% : __rb_reserve_next 355.00 - 5.9% : rb_end_commit 322.00 - 5.4% : getnstimeofday 268.00 - 4.5% : ring_buffer_unlock_commit 262.00 - 4.4% : ring_buffer_producer_thread [ring_buffer_benchmark] 113.00 - 1.9% : read_tsc 91.00 - 1.5% : debug_smp_processor_id 69.00 - 1.1% : trace_recursive_unlock 66.00 - 1.1% : ring_buffer_event_data 25.00 - 0.4% : _spin_unlock_irq And the length of each write to the ring buffer measured at 310ns. This patch adds a new module parameter called "write_interval" which is defaulted to 50. This is the number of writes performed between timestamps. After this patch perf top shows: ------------------------------------------------------------------------------ PerfTop: 244 irqs/sec kernel:100.0% [1000Hz cpu-clock-msecs], (all, 4 CPUs) ------------------------------------------------------------------------------ samples pcnt kernel function _______ _____ _______________ 2842.00 - 40.4% : trace_clock_local 1043.00 - 14.8% : rb_reserve_next_event 784.00 - 11.1% : ring_buffer_lock_reserve 600.00 - 8.5% : __rb_reserve_next 579.00 - 8.2% : rb_end_commit 440.00 - 6.3% : ring_buffer_unlock_commit 290.00 - 4.1% : ring_buffer_producer_thread [ring_buffer_benchmark] 155.00 - 2.2% : debug_smp_processor_id 117.00 - 1.7% : trace_recursive_unlock 103.00 - 1.5% : ring_buffer_event_data 28.00 - 0.4% : do_gettimeofday 22.00 - 0.3% : _spin_unlock_irq 14.00 - 0.2% : native_read_tsc 11.00 - 0.2% : getnstimeofday do_gettimeofday dropped from 13% usage to a mere 0.4%! (using the default 50 interval) The measurement for each timestamp went from 310ns to 210ns. That's 100ns (1/3rd) overhead that the gettimeofday call was introducing. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-12 06:14:07 +08:00
module_param(write_iteration, uint, 0644);
MODULE_PARM_DESC(write_iteration, "# of writes between timestamp readings");
static int producer_nice = MAX_NICE;
static int consumer_nice = MAX_NICE;
static int producer_fifo = -1;
static int consumer_fifo = -1;
module_param(producer_nice, int, 0644);
MODULE_PARM_DESC(producer_nice, "nice prio for producer");
module_param(consumer_nice, int, 0644);
MODULE_PARM_DESC(consumer_nice, "nice prio for consumer");
module_param(producer_fifo, int, 0644);
MODULE_PARM_DESC(producer_fifo, "fifo prio for producer");
module_param(consumer_fifo, int, 0644);
MODULE_PARM_DESC(consumer_fifo, "fifo prio for consumer");
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
static int read_events;
static int test_error;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
#define TEST_ERROR() \
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
do { \
if (!test_error) { \
test_error = 1; \
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
WARN_ON(1); \
} \
} while (0)
enum event_status {
EVENT_FOUND,
EVENT_DROPPED,
};
static bool break_test(void)
{
return test_error || kthread_should_stop();
}
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
static enum event_status read_event(int cpu)
{
struct ring_buffer_event *event;
int *entry;
u64 ts;
ring-buffer: Add place holder recording of dropped events Currently, when the ring buffer drops events, it does not record the fact that it did so. It does inform the writer that the event was dropped by returning a NULL event, but it does not put in any place holder where the event was dropped. This is not a trivial thing to add because the ring buffer mostly runs in overwrite (flight recorder) mode. That is, when the ring buffer is full, new data will overwrite old data. In a produce/consumer mode, where new data is simply dropped when the ring buffer is full, it is trivial to add the placeholder for dropped events. When there's more room to write new data, then a special event can be added to notify the reader about the dropped events. But in overwrite mode, any new write can overwrite events. A place holder can not be inserted into the ring buffer since there never may be room. A reader could also come in at anytime and miss the placeholder. Luckily, the way the ring buffer works, the read side can find out if events were lost or not, and how many events. Everytime a write takes place, if it overwrites the header page (the next read) it updates a "overrun" variable that keeps track of the number of lost events. When a reader swaps out a page from the ring buffer, it can record this number, perfom the swap, and then check to see if the number changed, and take the diff if it has, which would be the number of events dropped. This can be stored by the reader and returned to callers of the reader. Since the reader page swap will fail if the writer moved the head page since the time the reader page set up the swap, this gives room to record the overruns without worrying about races. If the reader sets up the pages, records the overrun, than performs the swap, if the swap succeeds, then the overrun variable has not been updated since the setup before the swap. For binary readers of the ring buffer, a flag is set in the header of each sub page (sub buffer) of the ring buffer. This flag is embedded in the size field of the data on the sub buffer, in the 31st bit (the size can be 32 or 64 bits depending on the architecture), but only 27 bits needs to be used for the actual size (less actually). We could add a new field in the sub buffer header to also record the number of events dropped since the last read, but this will change the format of the binary ring buffer a bit too much. Perhaps this change can be made if the information on the number of events dropped is considered important enough. Note, the notification of dropped events is only used by consuming reads or peeking at the ring buffer. Iterating over the ring buffer does not keep this information because the necessary data is only available when a page swap is made, and the iterator does not swap out pages. Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: "Luis Claudio R. Goncalves" <lclaudio@uudg.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-04-01 01:21:56 +08:00
event = ring_buffer_consume(buffer, cpu, &ts, NULL);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (!event)
return EVENT_DROPPED;
entry = ring_buffer_event_data(event);
if (*entry != cpu) {
TEST_ERROR();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
return EVENT_DROPPED;
}
read++;
return EVENT_FOUND;
}
static enum event_status read_page(int cpu)
{
struct ring_buffer_event *event;
struct rb_page *rpage;
unsigned long commit;
void *bpage;
int *entry;
int ret;
int inc;
int i;
tracing: Use NUMA allocation for per-cpu ring buffer pages The tracing ring buffer is a group of per-cpu ring buffers where allocation and logging is done on a per-cpu basis. The events that are generated on a particular CPU are logged in the corresponding buffer. This is to provide wait-free writes between CPUs and good NUMA node locality while accessing the ring buffer. However, the allocation routines consider NUMA locality only for buffer page metadata and not for the actual buffer page. This causes the pages to be allocated on the NUMA node local to the CPU where the allocation routine is running at the time. This patch fixes the problem by using a NUMA node specific allocation routine so that the pages are allocated from a NUMA node local to the logging CPU. I tested with the getuid_microbench from autotest. It is a simple binary that calls getuid() in a loop and measures the average time for the syscall to complete. The following command was used to test: $ getuid_microbench 1000000 Compared the numbers found on kernel with and without this patch and found that logging latency decreases by 30-50 ns/call. tracing with non-NUMA allocation - 569 ns/call tracing with NUMA allocation - 512 ns/call Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Michael Rubin <mrubin@google.com> Cc: David Sharp <dhsharp@google.com> Link: http://lkml.kernel.org/r/1304470602-20366-1-git-send-email-vnagarnaik@google.com Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2011-05-04 08:56:42 +08:00
bpage = ring_buffer_alloc_read_page(buffer, cpu);
if (!bpage)
return EVENT_DROPPED;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
ret = ring_buffer_read_page(buffer, &bpage, PAGE_SIZE, cpu, 1);
if (ret >= 0) {
rpage = bpage;
/* The commit may have missed event flags set, clear them */
commit = local_read(&rpage->commit) & 0xfffff;
for (i = 0; i < commit && !test_error ; i += inc) {
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (i >= (PAGE_SIZE - offsetof(struct rb_page, data))) {
TEST_ERROR();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
}
inc = -1;
event = (void *)&rpage->data[i];
switch (event->type_len) {
case RINGBUF_TYPE_PADDING:
/* failed writes may be discarded events */
if (!event->time_delta)
TEST_ERROR();
inc = event->array[0] + 4;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
case RINGBUF_TYPE_TIME_EXTEND:
inc = 8;
break;
case 0:
entry = ring_buffer_event_data(event);
if (*entry != cpu) {
TEST_ERROR();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
}
read++;
if (!event->array[0]) {
TEST_ERROR();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
}
inc = event->array[0] + 4;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
default:
entry = ring_buffer_event_data(event);
if (*entry != cpu) {
TEST_ERROR();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
}
read++;
inc = ((event->type_len + 1) * 4);
}
if (test_error)
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
if (inc <= 0) {
TEST_ERROR();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
}
}
}
ring_buffer_free_read_page(buffer, bpage);
if (ret < 0)
return EVENT_DROPPED;
return EVENT_FOUND;
}
static void ring_buffer_consumer(void)
{
/* toggle between reading pages and events */
read_events ^= 1;
read = 0;
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
/*
* Continue running until the producer specifically asks to stop
* and is ready for the completion.
*/
while (!READ_ONCE(reader_finish)) {
int found = 1;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
while (found && !test_error) {
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
int cpu;
found = 0;
for_each_online_cpu(cpu) {
enum event_status stat;
if (read_events)
stat = read_event(cpu);
else
stat = read_page(cpu);
if (test_error)
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (stat == EVENT_FOUND)
found = 1;
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
}
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
}
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
/* Wait till the producer wakes us up when there is more data
* available or when the producer wants us to finish reading.
*/
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
set_current_state(TASK_INTERRUPTIBLE);
if (reader_finish)
break;
schedule();
}
ring_buffer: Do no not complete benchmark reader too early It seems that complete(&read_done) might be called too early in some situations. 1st scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # producing data in # the do-while cycle ring_buffer_consumer(); # reading data # got error # set kill_test = 1; set_current_state( TASK_INTERRUPTIBLE); if (reader_finish) # false schedule(); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because # kill_test == 1 reader_finish = 0; complete(&read_done); 1st BANG: We might access uninitialized "read_done" if this is the the first round. # producer finally leaving # the do-while cycle because kill_test == 1; if (consumer) { reader_finish = 1; wake_up_process(consumer); wait_for_completion(&read_done); 2nd BANG: This will never complete because consumer already did the completion. 2nd scenario: ------------- CPU0 CPU1 ring_buffer_producer_thread() wake_up_process(consumer); wait_for_completion(&read_start); ring_buffer_consumer_thread() complete(&read_start); ring_buffer_producer() # CPU3 removes the module <--- difference from # and stops producer <--- the 1st scenario if (kthread_should_stop()) kill_test = 1; ring_buffer_consumer(); while (!reader_finish && !kill_test) # kill_test == 1 => we never go # into the top level while() reader_finish = 0; complete(&read_done); # producer still in the middle of # do-while cycle if (consumer && !(cnt % wakeup_interval)) wake_up_process(consumer); # spurious wakeup while (!reader_finish && !kill_test) # leaving because kill_test == 1 reader_finish = 0; complete(&read_done); BANG: We are in the same "bang" situations as in the 1st scenario. Root of the problem: -------------------- ring_buffer_consumer() must complete "read_done" only when "reader_finish" variable is set. It must not be skipped due to other conditions. Note that we still must keep the check for "reader_finish" in a loop because there might be spurious wakeups as described in the above scenarios. Solution: ---------- The top level cycle in ring_buffer_consumer() will finish only when "reader_finish" is set. The data will be read in "while-do" cycle so that they are not read after an error (kill_test == 1) or a spurious wake up. In addition, "reader_finish" is manipulated by the producer thread. Therefore we add READ_ONCE() to make sure that the fresh value is read in each cycle. Also we add the corresponding barrier to synchronize the sleep check. Next we set the state back to TASK_RUNNING for the situation where we did not sleep. Just from paranoid reasons, we initialize both completions statically. This is safer, in case there are other races that we are unaware of. As a side effect we could remove the memory barrier from ring_buffer_producer_thread(). IMHO, this was the reason for the barrier. ring_buffer_reset() uses spin locks that should provide the needed memory barrier for using the buffer. Link: http://lkml.kernel.org/r/1441629518-32712-2-git-send-email-pmladek@suse.com Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-09-07 20:38:37 +08:00
__set_current_state(TASK_RUNNING);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
reader_finish = 0;
complete(&read_done);
}
static void ring_buffer_producer(void)
{
ktime_t start_time, end_time, timeout;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
unsigned long long time;
unsigned long long entries;
unsigned long long overruns;
unsigned long missed = 0;
unsigned long hit = 0;
unsigned long avg;
int cnt = 0;
/*
* Hammer the buffer for 10 secs (this may
* make the system stall)
*/
trace_printk("Starting ring buffer hammer\n");
start_time = ktime_get();
timeout = ktime_add_ns(start_time, RUN_TIME * NSEC_PER_SEC);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
do {
struct ring_buffer_event *event;
int *entry;
ring-buffer: Add multiple iterations between benchmark timestamps The ring_buffer_benchmark does a gettimeofday after every write to the ring buffer in its measurements. This adds the overhead of the call to gettimeofday to the measurements and does not give an accurate picture of the length of time it takes to record a trace. This was first noticed with perf top: ------------------------------------------------------------------------------ PerfTop: 679 irqs/sec kernel:99.9% [1000Hz cpu-clock-msecs], (all, 4 CPUs) ------------------------------------------------------------------------------ samples pcnt kernel function _______ _____ _______________ 1673.00 - 27.8% : trace_clock_local 806.00 - 13.4% : do_gettimeofday 590.00 - 9.8% : rb_reserve_next_event 554.00 - 9.2% : native_read_tsc 431.00 - 7.2% : ring_buffer_lock_reserve 365.00 - 6.1% : __rb_reserve_next 355.00 - 5.9% : rb_end_commit 322.00 - 5.4% : getnstimeofday 268.00 - 4.5% : ring_buffer_unlock_commit 262.00 - 4.4% : ring_buffer_producer_thread [ring_buffer_benchmark] 113.00 - 1.9% : read_tsc 91.00 - 1.5% : debug_smp_processor_id 69.00 - 1.1% : trace_recursive_unlock 66.00 - 1.1% : ring_buffer_event_data 25.00 - 0.4% : _spin_unlock_irq And the length of each write to the ring buffer measured at 310ns. This patch adds a new module parameter called "write_interval" which is defaulted to 50. This is the number of writes performed between timestamps. After this patch perf top shows: ------------------------------------------------------------------------------ PerfTop: 244 irqs/sec kernel:100.0% [1000Hz cpu-clock-msecs], (all, 4 CPUs) ------------------------------------------------------------------------------ samples pcnt kernel function _______ _____ _______________ 2842.00 - 40.4% : trace_clock_local 1043.00 - 14.8% : rb_reserve_next_event 784.00 - 11.1% : ring_buffer_lock_reserve 600.00 - 8.5% : __rb_reserve_next 579.00 - 8.2% : rb_end_commit 440.00 - 6.3% : ring_buffer_unlock_commit 290.00 - 4.1% : ring_buffer_producer_thread [ring_buffer_benchmark] 155.00 - 2.2% : debug_smp_processor_id 117.00 - 1.7% : trace_recursive_unlock 103.00 - 1.5% : ring_buffer_event_data 28.00 - 0.4% : do_gettimeofday 22.00 - 0.3% : _spin_unlock_irq 14.00 - 0.2% : native_read_tsc 11.00 - 0.2% : getnstimeofday do_gettimeofday dropped from 13% usage to a mere 0.4%! (using the default 50 interval) The measurement for each timestamp went from 310ns to 210ns. That's 100ns (1/3rd) overhead that the gettimeofday call was introducing. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-12 06:14:07 +08:00
int i;
for (i = 0; i < write_iteration; i++) {
event = ring_buffer_lock_reserve(buffer, 10);
if (!event) {
missed++;
} else {
hit++;
entry = ring_buffer_event_data(event);
*entry = smp_processor_id();
ring_buffer_unlock_commit(buffer, event);
}
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
}
end_time = ktime_get();
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
cnt++;
if (consumer && !(cnt % wakeup_interval))
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
wake_up_process(consumer);
#ifndef CONFIG_PREEMPT
/*
* If we are a non preempt kernel, the 10 second run will
* stop everything while it runs. Instead, we will call
* cond_resched and also add any time that was lost by a
* rescedule.
*
* Do a cond resched at the same frequency we would wake up
* the reader.
*/
if (cnt % wakeup_interval)
cond_resched();
#endif
} while (ktime_before(end_time, timeout) && !break_test());
trace_printk("End ring buffer hammer\n");
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (consumer) {
/* Init both completions here to avoid races */
init_completion(&read_start);
init_completion(&read_done);
/* the completions must be visible before the finish var */
smp_wmb();
reader_finish = 1;
wake_up_process(consumer);
wait_for_completion(&read_done);
}
time = ktime_us_delta(end_time, start_time);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
entries = ring_buffer_entries(buffer);
overruns = ring_buffer_overruns(buffer);
if (test_error)
trace_printk("ERROR!\n");
if (!disable_reader) {
if (consumer_fifo < 0)
trace_printk("Running Consumer at nice: %d\n",
consumer_nice);
else
trace_printk("Running Consumer at SCHED_FIFO %d\n",
consumer_fifo);
}
if (producer_fifo < 0)
trace_printk("Running Producer at nice: %d\n",
producer_nice);
else
trace_printk("Running Producer at SCHED_FIFO %d\n",
producer_fifo);
/* Let the user know that the test is running at low priority */
if (producer_fifo < 0 && consumer_fifo < 0 &&
producer_nice == MAX_NICE && consumer_nice == MAX_NICE)
trace_printk("WARNING!!! This test is running at lowest priority.\n");
trace_printk("Time: %lld (usecs)\n", time);
trace_printk("Overruns: %lld\n", overruns);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (disable_reader)
trace_printk("Read: (reader disabled)\n");
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
else
trace_printk("Read: %ld (by %s)\n", read,
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
read_events ? "events" : "pages");
trace_printk("Entries: %lld\n", entries);
trace_printk("Total: %lld\n", entries + overruns + read);
trace_printk("Missed: %ld\n", missed);
trace_printk("Hit: %ld\n", hit);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
/* Convert time from usecs to millisecs */
do_div(time, USEC_PER_MSEC);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (time)
hit /= (long)time;
else
trace_printk("TIME IS ZERO??\n");
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
trace_printk("Entries per millisec: %ld\n", hit);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
if (hit) {
/* Calculate the average time in nanosecs */
avg = NSEC_PER_MSEC / hit;
trace_printk("%ld ns per entry\n", avg);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
}
if (missed) {
if (time)
missed /= (long)time;
trace_printk("Total iterations per millisec: %ld\n",
hit + missed);
/* it is possible that hit + missed will overflow and be zero */
if (!(hit + missed)) {
trace_printk("hit + missed overflowed and totalled zero!\n");
hit--; /* make it non zero */
}
/* Caculate the average time in nanosecs */
avg = NSEC_PER_MSEC / (hit + missed);
trace_printk("%ld ns per entry\n", avg);
}
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
}
static void wait_to_die(void)
{
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
schedule();
set_current_state(TASK_INTERRUPTIBLE);
}
__set_current_state(TASK_RUNNING);
}
static int ring_buffer_consumer_thread(void *arg)
{
while (!break_test()) {
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
complete(&read_start);
ring_buffer_consumer();
set_current_state(TASK_INTERRUPTIBLE);
if (break_test())
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
break;
schedule();
}
__set_current_state(TASK_RUNNING);
if (!kthread_should_stop())
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
wait_to_die();
return 0;
}
static int ring_buffer_producer_thread(void *arg)
{
while (!break_test()) {
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
ring_buffer_reset(buffer);
if (consumer) {
wake_up_process(consumer);
wait_for_completion(&read_start);
}
ring_buffer_producer();
if (break_test())
goto out_kill;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
trace_printk("Sleeping for 10 secs\n");
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
set_current_state(TASK_INTERRUPTIBLE);
if (break_test())
goto out_kill;
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
schedule_timeout(HZ * SLEEP_TIME);
}
out_kill:
__set_current_state(TASK_RUNNING);
if (!kthread_should_stop())
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
wait_to_die();
return 0;
}
static int __init ring_buffer_benchmark_init(void)
{
int ret;
/* make a one meg buffer in overwite mode */
buffer = ring_buffer_alloc(1000000, RB_FL_OVERWRITE);
if (!buffer)
return -ENOMEM;
if (!disable_reader) {
consumer = kthread_create(ring_buffer_consumer_thread,
NULL, "rb_consumer");
ret = PTR_ERR(consumer);
if (IS_ERR(consumer))
goto out_fail;
}
producer = kthread_run(ring_buffer_producer_thread,
NULL, "rb_producer");
ret = PTR_ERR(producer);
if (IS_ERR(producer))
goto out_kill;
/*
* Run them as low-prio background tasks by default:
*/
if (!disable_reader) {
if (consumer_fifo >= 0) {
struct sched_param param = {
.sched_priority = consumer_fifo
};
sched_setscheduler(consumer, SCHED_FIFO, &param);
} else
set_user_nice(consumer, consumer_nice);
}
if (producer_fifo >= 0) {
struct sched_param param = {
.sched_priority = producer_fifo
};
sched_setscheduler(producer, SCHED_FIFO, &param);
} else
set_user_nice(producer, producer_nice);
ring-buffer: add benchmark and tester This patch adds code that can benchmark the ring buffer as well as test it. This code can be compiled into the kernel (not recommended) or as a module. A separate ring buffer is used to not interfer with other users, like ftrace. It creates a producer and a consumer (option to disable creation of the consumer) and will run for 10 seconds, then sleep for 10 seconds and then repeat. While running, the producer will write 10 byte loads into the ring buffer with just putting in the current CPU number. The reader will continually try to read the buffer. The reader will alternate from reading the buffer via event by event, or by full pages. The output is a pr_info, thus it will fill up the syslogs. Starting ring buffer hammer End ring buffer hammer Time: 9000349 (usecs) Overruns: 12578640 Read: 5358440 (by events) Entries: 0 Total: 17937080 Missed: 0 Hit: 17937080 Entries per millisec: 1993 501 ns per entry Sleeping for 10 secs Starting ring buffer hammer End ring buffer hammer Time: 9936350 (usecs) Overruns: 0 Read: 28146644 (by pages) Entries: 74 Total: 28146718 Missed: 0 Hit: 28146718 Entries per millisec: 2832 353 ns per entry Sleeping for 10 secs Time: is the time the test ran Overruns: the number of events that were overwritten and not read Read: the number of events read (either by pages or events) Entries: the number of entries left in the buffer (the by pages will only read full pages) Total: Entries + Read + Overruns Missed: the number of entries that failed to write Hit: the number of entries that were written The above example shows that it takes ~353 nanosecs per entry when there is a reader, reading by pages (and no overruns) The event by event reader slowed the producer down to 501 nanosecs. [ Impact: see how changes to the ring buffer affect stability and performance ] Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-06 10:47:18 +08:00
return 0;
out_kill:
if (consumer)
kthread_stop(consumer);
out_fail:
ring_buffer_free(buffer);
return ret;
}
static void __exit ring_buffer_benchmark_exit(void)
{
kthread_stop(producer);
if (consumer)
kthread_stop(consumer);
ring_buffer_free(buffer);
}
module_init(ring_buffer_benchmark_init);
module_exit(ring_buffer_benchmark_exit);
MODULE_AUTHOR("Steven Rostedt");
MODULE_DESCRIPTION("ring_buffer_benchmark");
MODULE_LICENSE("GPL");