linux/drivers/thermal/st/st_thermal.c

314 lines
6.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* ST Thermal Sensor Driver core routines
* Author: Ajit Pal Singh <ajitpal.singh@st.com>
*
* Copyright (C) 2003-2014 STMicroelectronics (R&D) Limited
*/
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include "st_thermal.h"
/* The Thermal Framework expects millidegrees */
#define mcelsius(temp) ((temp) * 1000)
/*
* Function to allocate regfields which are common
* between syscfg and memory mapped based sensors
*/
static int st_thermal_alloc_regfields(struct st_thermal_sensor *sensor)
{
struct device *dev = sensor->dev;
struct regmap *regmap = sensor->regmap;
const struct reg_field *reg_fields = sensor->cdata->reg_fields;
sensor->dcorrect = devm_regmap_field_alloc(dev, regmap,
reg_fields[DCORRECT]);
sensor->overflow = devm_regmap_field_alloc(dev, regmap,
reg_fields[OVERFLOW]);
sensor->temp_data = devm_regmap_field_alloc(dev, regmap,
reg_fields[DATA]);
if (IS_ERR(sensor->dcorrect) ||
IS_ERR(sensor->overflow) ||
IS_ERR(sensor->temp_data)) {
dev_err(dev, "failed to allocate common regfields\n");
return -EINVAL;
}
return sensor->ops->alloc_regfields(sensor);
}
static int st_thermal_sensor_on(struct st_thermal_sensor *sensor)
{
int ret;
struct device *dev = sensor->dev;
ret = clk_prepare_enable(sensor->clk);
if (ret) {
dev_err(dev, "failed to enable clk\n");
return ret;
}
ret = sensor->ops->power_ctrl(sensor, POWER_ON);
if (ret) {
dev_err(dev, "failed to power on sensor\n");
clk_disable_unprepare(sensor->clk);
}
return ret;
}
static int st_thermal_sensor_off(struct st_thermal_sensor *sensor)
{
int ret;
ret = sensor->ops->power_ctrl(sensor, POWER_OFF);
if (ret)
return ret;
clk_disable_unprepare(sensor->clk);
return 0;
}
static int st_thermal_calibration(struct st_thermal_sensor *sensor)
{
int ret;
unsigned int val;
struct device *dev = sensor->dev;
/* Check if sensor calibration data is already written */
ret = regmap_field_read(sensor->dcorrect, &val);
if (ret) {
dev_err(dev, "failed to read calibration data\n");
return ret;
}
if (!val) {
/*
* Sensor calibration value not set by bootloader,
* default calibration data to be used
*/
ret = regmap_field_write(sensor->dcorrect,
sensor->cdata->calibration_val);
if (ret)
dev_err(dev, "failed to set calibration data\n");
}
return ret;
}
/* Callback to get temperature from HW*/
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
static int st_thermal_get_temp(struct thermal_zone_device *th, int *temperature)
{
struct st_thermal_sensor *sensor = th->devdata;
struct device *dev = sensor->dev;
unsigned int temp;
unsigned int overflow;
int ret;
ret = regmap_field_read(sensor->overflow, &overflow);
if (ret)
return ret;
if (overflow)
return -EIO;
ret = regmap_field_read(sensor->temp_data, &temp);
if (ret)
return ret;
temp += sensor->cdata->temp_adjust_val;
temp = mcelsius(temp);
dev_dbg(dev, "temperature: %d\n", temp);
*temperature = temp;
return 0;
}
static int st_thermal_get_trip_type(struct thermal_zone_device *th,
int trip, enum thermal_trip_type *type)
{
struct st_thermal_sensor *sensor = th->devdata;
struct device *dev = sensor->dev;
switch (trip) {
case 0:
*type = THERMAL_TRIP_CRITICAL;
break;
default:
dev_err(dev, "invalid trip point\n");
return -EINVAL;
}
return 0;
}
static int st_thermal_get_trip_temp(struct thermal_zone_device *th,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int trip, int *temp)
{
struct st_thermal_sensor *sensor = th->devdata;
struct device *dev = sensor->dev;
switch (trip) {
case 0:
*temp = mcelsius(sensor->cdata->crit_temp);
break;
default:
dev_err(dev, "Invalid trip point\n");
return -EINVAL;
}
return 0;
}
static struct thermal_zone_device_ops st_tz_ops = {
.get_temp = st_thermal_get_temp,
.get_trip_type = st_thermal_get_trip_type,
.get_trip_temp = st_thermal_get_trip_temp,
};
int st_thermal_register(struct platform_device *pdev,
const struct of_device_id *st_thermal_of_match)
{
struct st_thermal_sensor *sensor;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
const struct of_device_id *match;
int polling_delay;
int ret;
if (!np) {
dev_err(dev, "device tree node not found\n");
return -EINVAL;
}
sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL);
if (!sensor)
return -ENOMEM;
sensor->dev = dev;
match = of_match_device(st_thermal_of_match, dev);
if (!(match && match->data))
return -EINVAL;
sensor->cdata = match->data;
if (!sensor->cdata->ops)
return -EINVAL;
sensor->ops = sensor->cdata->ops;
ret = (sensor->ops->regmap_init)(sensor);
if (ret)
return ret;
ret = st_thermal_alloc_regfields(sensor);
if (ret)
return ret;
sensor->clk = devm_clk_get(dev, "thermal");
if (IS_ERR(sensor->clk)) {
dev_err(dev, "failed to fetch clock\n");
return PTR_ERR(sensor->clk);
}
if (sensor->ops->register_enable_irq) {
ret = sensor->ops->register_enable_irq(sensor);
if (ret)
return ret;
}
ret = st_thermal_sensor_on(sensor);
if (ret)
return ret;
ret = st_thermal_calibration(sensor);
if (ret)
goto sensor_off;
polling_delay = sensor->ops->register_enable_irq ? 0 : 1000;
sensor->thermal_dev =
thermal_zone_device_register(dev_name(dev), 1, 0, sensor,
&st_tz_ops, NULL, 0, polling_delay);
if (IS_ERR(sensor->thermal_dev)) {
dev_err(dev, "failed to register thermal zone device\n");
ret = PTR_ERR(sensor->thermal_dev);
goto sensor_off;
}
ret = thermal_zone_device_enable(sensor->thermal_dev);
if (ret)
goto tzd_unregister;
platform_set_drvdata(pdev, sensor);
return 0;
tzd_unregister:
thermal_zone_device_unregister(sensor->thermal_dev);
sensor_off:
st_thermal_sensor_off(sensor);
return ret;
}
EXPORT_SYMBOL_GPL(st_thermal_register);
int st_thermal_unregister(struct platform_device *pdev)
{
struct st_thermal_sensor *sensor = platform_get_drvdata(pdev);
st_thermal_sensor_off(sensor);
thermal_zone_device_unregister(sensor->thermal_dev);
return 0;
}
EXPORT_SYMBOL_GPL(st_thermal_unregister);
#ifdef CONFIG_PM_SLEEP
static int st_thermal_suspend(struct device *dev)
{
struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
return st_thermal_sensor_off(sensor);
}
static int st_thermal_resume(struct device *dev)
{
int ret;
struct st_thermal_sensor *sensor = dev_get_drvdata(dev);
ret = st_thermal_sensor_on(sensor);
if (ret)
return ret;
ret = st_thermal_calibration(sensor);
if (ret)
return ret;
if (sensor->ops->enable_irq) {
ret = sensor->ops->enable_irq(sensor);
if (ret)
return ret;
}
return 0;
}
#endif
SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
MODULE_AUTHOR("STMicroelectronics (R&D) Limited <ajitpal.singh@st.com>");
MODULE_DESCRIPTION("STMicroelectronics STi SoC Thermal Sensor Driver");
MODULE_LICENSE("GPL v2");