openkylin
/
linux
mirror of https://gitee.com/openkylin/linux.git
9
0
Fork 0
Code Issues Projects Releases Wiki Activity
linux/drivers/net/ethernet/intel/ixgbe/ixgbe_model.h

104 lines
3.0 KiB
C
Raw Normal View History

net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
/*******************************************************************************
*
* Intel 10 Gigabit PCI Express Linux drive
ixgbe: fix dates on header of ixgbe_model.h Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Reported-by: Mark Rustad <mark.d.rustad@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:35:23 +08:00
* Copyright(c) 2016 Intel Corporation.
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program. If not, see <http://www.gnu.org/licenses/>.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*
* Contact Information:
* e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
******************************************************************************/
#ifndef _IXGBE_MODEL_H_
#define _IXGBE_MODEL_H_
#include "ixgbe.h"
#include "ixgbe_type.h"
struct ixgbe_mat_field {
unsigned int off;
int (*val)(struct ixgbe_fdir_filter *input,
union ixgbe_atr_input *mask,
ixgbe: use u32 instead of __u32 in model header I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:34:53 +08:00
u32 val, u32 m);
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
unsigned int type;
};
static inline int ixgbe_mat_prgm_sip(struct ixgbe_fdir_filter *input,
union ixgbe_atr_input *mask,
ixgbe: use u32 instead of __u32 in model header I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:34:53 +08:00
u32 val, u32 m)
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
{
input->filter.formatted.src_ip[0] = val;
mask->formatted.src_ip[0] = m;
return 0;
}
static inline int ixgbe_mat_prgm_dip(struct ixgbe_fdir_filter *input,
union ixgbe_atr_input *mask,
ixgbe: use u32 instead of __u32 in model header I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:34:53 +08:00
u32 val, u32 m)
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
{
input->filter.formatted.dst_ip[0] = val;
mask->formatted.dst_ip[0] = m;
return 0;
}
static struct ixgbe_mat_field ixgbe_ipv4_fields[] = {
ixgbe: Fix cls_u32 offload support for fields with masks Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-08 01:41:48 +08:00
{ .off = 12, .val = ixgbe_mat_prgm_sip,
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
.type = IXGBE_ATR_FLOW_TYPE_IPV4},
ixgbe: Fix cls_u32 offload support for fields with masks Remove the incorrect check for mask in ixgbe_configure_clsu32 and drop the 'mask' field that is not required in struct ixgbe_mat_field Verified with the following filters: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:1 u32 ht 800: \ match ip dst 10.0.0.1/8 match ip src 10.0.0.2/8 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:2 u32 ht 800: \ match ip dst 11.0.0.1/16 match ip src 11.0.0.2/16 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:3 u32 ht 800: \ match ip dst 12.0.0.1/24 match ip src 12.0.0.2/24 action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:4 u32 ht 800: \ match ip dst 13.0.0.1/32 match ip src 13.0.0.2/32 action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-08 01:41:48 +08:00
{ .off = 16, .val = ixgbe_mat_prgm_dip,
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
.type = IXGBE_ATR_FLOW_TYPE_IPV4},
{ .val = NULL } /* terminal node */
};
ixgbe: Fix cls_u32 offload support for L4 ports Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-08 01:41:49 +08:00
static inline int ixgbe_mat_prgm_ports(struct ixgbe_fdir_filter *input,
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
union ixgbe_atr_input *mask,
ixgbe: use u32 instead of __u32 in model header I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:34:53 +08:00
u32 val, u32 m)
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
{
input->filter.formatted.src_port = val & 0xffff;
mask->formatted.src_port = m & 0xffff;
ixgbe: Fix cls_u32 offload support for L4 ports Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-08 01:41:49 +08:00
input->filter.formatted.dst_port = val >> 16;
mask->formatted.dst_port = m >> 16;
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
return 0;
};
static struct ixgbe_mat_field ixgbe_tcp_fields[] = {
ixgbe: Fix cls_u32 offload support for L4 ports Fix support for 16 bit source/dest port matches in ixgbe model. u32 uses a single 32-bit key value for both source and destination ports starting at offset 0. So replace the 2 functions with a single function that takes this key value/mask to program both source and dest ports. Verified with the following filter: #tc qdisc add dev p4p1 ingress #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1: u32 divisor 1 #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 800:0:10 u32 ht 800: link 1: \ offset at 0 mask 0f00 shift 6 plus 0 eat match ip protocol 6 ff #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:10 u32 ht 1: \ match tcp src 1024 ffff match tcp dst 80 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:11 u32 ht 1: \ match tcp src 1025 ffff action drop #tc filter add dev p4p1 parent ffff: protocol ip prio 99 \ handle 1:0:12 u32 ht 1: \ match tcp dst 81 ffff action drop Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-03-08 01:41:49 +08:00
{.off = 0, .val = ixgbe_mat_prgm_ports,
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
.type = IXGBE_ATR_FLOW_TYPE_TCPV4},
{ .val = NULL } /* terminal node */
};
struct ixgbe_nexthdr {
/* offset, shift, and mask of position to next header */
unsigned int o;
ixgbe: use u32 instead of __u32 in model header I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:34:53 +08:00
u32 s;
u32 m;
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
/* match criteria to make this jump*/
unsigned int off;
ixgbe: use u32 instead of __u32 in model header I incorrectly used __u32 types where we should be using u32 types when I added the ixgbe_model.h file. Fixes: 9d35cf062e05 ("net: ixgbe: add minimal parser details for ixgbe") Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18 06:34:53 +08:00
u32 val;
u32 mask;
net: ixgbe: add minimal parser details for ixgbe This adds an ixgbe data structure that is used to determine what headers:fields can be matched and in what order they are supported. For hardware devices this can be a bit tricky because typically only pre-programmed (firmware, ucode, rtl) parse graphs will be supported and we don't yet have an interface to change these from the OS. So its sort of a you get whatever your friendly vendor provides affair at the moment. In the future we can add the get routines and set routines to update this data structure. One interesting thing to note here is the data structure here identifies ethernet, ip, and tcp fields without having to hardcode them as enumerations or use other identifiers. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17 13:18:28 +08:00
/* location of jump to make */
struct ixgbe_mat_field *jump;
};
static struct ixgbe_nexthdr ixgbe_ipv4_jumps[] = {
{ .o = 0, .s = 6, .m = 0xf,
.off = 8, .val = 0x600, .mask = 0xff00, .jump = ixgbe_tcp_fields},
{ .jump = NULL } /* terminal node */
};
#endif /* _IXGBE_MODEL_H_ */