2006-05-23 18:10:15 +08:00
|
|
|
/*************************************************************************
|
|
|
|
* myri10ge.c: Myricom Myri-10G Ethernet driver.
|
|
|
|
*
|
2007-02-28 00:18:40 +08:00
|
|
|
* Copyright (C) 2005 - 2007 Myricom, Inc.
|
2006-05-23 18:10:15 +08:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. Neither the name of Myricom, Inc. nor the names of its contributors
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
2007-02-28 00:18:40 +08:00
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
2006-05-23 18:10:15 +08:00
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
2007-02-28 00:18:40 +08:00
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
2006-05-23 18:10:15 +08:00
|
|
|
*
|
|
|
|
*
|
|
|
|
* If the eeprom on your board is not recent enough, you will need to get a
|
|
|
|
* newer firmware image at:
|
|
|
|
* http://www.myri.com/scs/download-Myri10GE.html
|
|
|
|
*
|
|
|
|
* Contact Information:
|
|
|
|
* <help@myri.com>
|
|
|
|
* Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
|
|
|
|
*************************************************************************/
|
|
|
|
|
|
|
|
#include <linux/tcp.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
2006-06-08 22:25:00 +08:00
|
|
|
#include <linux/dma-mapping.h>
|
2006-05-23 18:10:15 +08:00
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/if_ether.h>
|
|
|
|
#include <linux/if_vlan.h>
|
2007-09-18 02:37:42 +08:00
|
|
|
#include <linux/inet_lro.h>
|
2006-05-23 18:10:15 +08:00
|
|
|
#include <linux/ip.h>
|
|
|
|
#include <linux/inet.h>
|
|
|
|
#include <linux/in.h>
|
|
|
|
#include <linux/ethtool.h>
|
|
|
|
#include <linux/firmware.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/version.h>
|
|
|
|
#include <linux/timer.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <linux/crc32.h>
|
|
|
|
#include <linux/moduleparam.h>
|
|
|
|
#include <linux/io.h>
|
2007-07-10 02:50:22 +08:00
|
|
|
#include <linux/log2.h>
|
2006-05-23 18:10:15 +08:00
|
|
|
#include <net/checksum.h>
|
2007-09-18 02:37:42 +08:00
|
|
|
#include <net/ip.h>
|
|
|
|
#include <net/tcp.h>
|
2006-05-23 18:10:15 +08:00
|
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/processor.h>
|
|
|
|
#ifdef CONFIG_MTRR
|
|
|
|
#include <asm/mtrr.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#include "myri10ge_mcp.h"
|
|
|
|
#include "myri10ge_mcp_gen_header.h"
|
|
|
|
|
2007-10-13 18:34:36 +08:00
|
|
|
#define MYRI10GE_VERSION_STR "1.3.2-1.287"
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
|
|
|
|
MODULE_AUTHOR("Maintainer: help@myri.com");
|
|
|
|
MODULE_VERSION(MYRI10GE_VERSION_STR);
|
|
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
|
|
|
|
#define MYRI10GE_MAX_ETHER_MTU 9014
|
|
|
|
|
|
|
|
#define MYRI10GE_ETH_STOPPED 0
|
|
|
|
#define MYRI10GE_ETH_STOPPING 1
|
|
|
|
#define MYRI10GE_ETH_STARTING 2
|
|
|
|
#define MYRI10GE_ETH_RUNNING 3
|
|
|
|
#define MYRI10GE_ETH_OPEN_FAILED 4
|
|
|
|
|
|
|
|
#define MYRI10GE_EEPROM_STRINGS_SIZE 256
|
|
|
|
#define MYRI10GE_MAX_SEND_DESC_TSO ((65536 / 2048) * 2)
|
2007-09-18 02:37:42 +08:00
|
|
|
#define MYRI10GE_MAX_LRO_DESCRIPTORS 8
|
|
|
|
#define MYRI10GE_LRO_MAX_PKTS 64
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2006-11-21 02:48:32 +08:00
|
|
|
#define MYRI10GE_NO_CONFIRM_DATA htonl(0xffffffff)
|
2006-05-23 18:10:15 +08:00
|
|
|
#define MYRI10GE_NO_RESPONSE_RESULT 0xffffffff
|
|
|
|
|
2006-12-11 18:25:09 +08:00
|
|
|
#define MYRI10GE_ALLOC_ORDER 0
|
|
|
|
#define MYRI10GE_ALLOC_SIZE ((1 << MYRI10GE_ALLOC_ORDER) * PAGE_SIZE)
|
|
|
|
#define MYRI10GE_MAX_FRAGS_PER_FRAME (MYRI10GE_MAX_ETHER_MTU/MYRI10GE_ALLOC_SIZE + 1)
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
struct myri10ge_rx_buffer_state {
|
2006-12-11 18:25:09 +08:00
|
|
|
struct page *page;
|
|
|
|
int page_offset;
|
2006-05-23 18:10:15 +08:00
|
|
|
DECLARE_PCI_UNMAP_ADDR(bus)
|
|
|
|
DECLARE_PCI_UNMAP_LEN(len)
|
|
|
|
};
|
|
|
|
|
|
|
|
struct myri10ge_tx_buffer_state {
|
|
|
|
struct sk_buff *skb;
|
|
|
|
int last;
|
|
|
|
DECLARE_PCI_UNMAP_ADDR(bus)
|
|
|
|
DECLARE_PCI_UNMAP_LEN(len)
|
|
|
|
};
|
|
|
|
|
|
|
|
struct myri10ge_cmd {
|
|
|
|
u32 data0;
|
|
|
|
u32 data1;
|
|
|
|
u32 data2;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct myri10ge_rx_buf {
|
|
|
|
struct mcp_kreq_ether_recv __iomem *lanai; /* lanai ptr for recv ring */
|
|
|
|
u8 __iomem *wc_fifo; /* w/c rx dma addr fifo address */
|
|
|
|
struct mcp_kreq_ether_recv *shadow; /* host shadow of recv ring */
|
|
|
|
struct myri10ge_rx_buffer_state *info;
|
2006-12-11 18:25:09 +08:00
|
|
|
struct page *page;
|
|
|
|
dma_addr_t bus;
|
|
|
|
int page_offset;
|
2006-05-23 18:10:15 +08:00
|
|
|
int cnt;
|
2006-12-11 18:25:09 +08:00
|
|
|
int fill_cnt;
|
2006-05-23 18:10:15 +08:00
|
|
|
int alloc_fail;
|
|
|
|
int mask; /* number of rx slots -1 */
|
2006-12-11 18:25:09 +08:00
|
|
|
int watchdog_needed;
|
2006-05-23 18:10:15 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct myri10ge_tx_buf {
|
|
|
|
struct mcp_kreq_ether_send __iomem *lanai; /* lanai ptr for sendq */
|
|
|
|
u8 __iomem *wc_fifo; /* w/c send fifo address */
|
|
|
|
struct mcp_kreq_ether_send *req_list; /* host shadow of sendq */
|
|
|
|
char *req_bytes;
|
|
|
|
struct myri10ge_tx_buffer_state *info;
|
|
|
|
int mask; /* number of transmit slots -1 */
|
|
|
|
int boundary; /* boundary transmits cannot cross */
|
|
|
|
int req ____cacheline_aligned; /* transmit slots submitted */
|
|
|
|
int pkt_start; /* packets started */
|
|
|
|
int done ____cacheline_aligned; /* transmit slots completed */
|
|
|
|
int pkt_done; /* packets completed */
|
|
|
|
};
|
|
|
|
|
|
|
|
struct myri10ge_rx_done {
|
|
|
|
struct mcp_slot *entry;
|
|
|
|
dma_addr_t bus;
|
|
|
|
int cnt;
|
|
|
|
int idx;
|
2007-09-18 02:37:42 +08:00
|
|
|
struct net_lro_mgr lro_mgr;
|
|
|
|
struct net_lro_desc lro_desc[MYRI10GE_MAX_LRO_DESCRIPTORS];
|
2006-05-23 18:10:15 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
struct myri10ge_priv {
|
|
|
|
int running; /* running? */
|
|
|
|
int csum_flag; /* rx_csums? */
|
|
|
|
struct myri10ge_tx_buf tx; /* transmit ring */
|
|
|
|
struct myri10ge_rx_buf rx_small;
|
|
|
|
struct myri10ge_rx_buf rx_big;
|
|
|
|
struct myri10ge_rx_done rx_done;
|
|
|
|
int small_bytes;
|
2006-12-11 18:25:09 +08:00
|
|
|
int big_bytes;
|
2006-05-23 18:10:15 +08:00
|
|
|
struct net_device *dev;
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
struct napi_struct napi;
|
2006-05-23 18:10:15 +08:00
|
|
|
struct net_device_stats stats;
|
|
|
|
u8 __iomem *sram;
|
|
|
|
int sram_size;
|
|
|
|
unsigned long board_span;
|
|
|
|
unsigned long iomem_base;
|
2006-11-21 02:48:32 +08:00
|
|
|
__be32 __iomem *irq_claim;
|
|
|
|
__be32 __iomem *irq_deassert;
|
2006-05-23 18:10:15 +08:00
|
|
|
char *mac_addr_string;
|
|
|
|
struct mcp_cmd_response *cmd;
|
|
|
|
dma_addr_t cmd_bus;
|
|
|
|
struct mcp_irq_data *fw_stats;
|
|
|
|
dma_addr_t fw_stats_bus;
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
int msi_enabled;
|
2006-11-21 02:48:32 +08:00
|
|
|
__be32 link_state;
|
2006-05-23 18:10:15 +08:00
|
|
|
unsigned int rdma_tags_available;
|
|
|
|
int intr_coal_delay;
|
2006-11-21 02:48:32 +08:00
|
|
|
__be32 __iomem *intr_coal_delay_ptr;
|
2006-05-23 18:10:15 +08:00
|
|
|
int mtrr;
|
2007-03-08 03:02:32 +08:00
|
|
|
int wc_enabled;
|
2006-05-23 18:10:15 +08:00
|
|
|
int wake_queue;
|
|
|
|
int stop_queue;
|
|
|
|
int down_cnt;
|
|
|
|
wait_queue_head_t down_wq;
|
|
|
|
struct work_struct watchdog_work;
|
|
|
|
struct timer_list watchdog_timer;
|
|
|
|
int watchdog_tx_done;
|
2006-07-30 12:14:15 +08:00
|
|
|
int watchdog_tx_req;
|
2007-08-09 15:02:14 +08:00
|
|
|
int watchdog_pause;
|
2006-05-23 18:10:15 +08:00
|
|
|
int watchdog_resets;
|
|
|
|
int tx_linearized;
|
|
|
|
int pause;
|
|
|
|
char *fw_name;
|
|
|
|
char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
|
|
|
|
char fw_version[128];
|
2007-02-22 01:05:17 +08:00
|
|
|
int fw_ver_major;
|
|
|
|
int fw_ver_minor;
|
|
|
|
int fw_ver_tiny;
|
|
|
|
int adopted_rx_filter_bug;
|
2006-05-23 18:10:15 +08:00
|
|
|
u8 mac_addr[6]; /* eeprom mac address */
|
|
|
|
unsigned long serial_number;
|
|
|
|
int vendor_specific_offset;
|
2006-08-22 05:36:56 +08:00
|
|
|
int fw_multicast_support;
|
2007-10-13 18:34:01 +08:00
|
|
|
unsigned long features;
|
|
|
|
u32 max_tso6;
|
2006-05-23 18:10:15 +08:00
|
|
|
u32 read_dma;
|
|
|
|
u32 write_dma;
|
|
|
|
u32 read_write_dma;
|
2006-08-22 05:36:49 +08:00
|
|
|
u32 link_changes;
|
|
|
|
u32 msg_enable;
|
2006-05-23 18:10:15 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static char *myri10ge_fw_unaligned = "myri10ge_ethp_z8e.dat";
|
|
|
|
static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
|
|
|
|
|
|
|
|
static char *myri10ge_fw_name = NULL;
|
|
|
|
module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
|
|
|
|
MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name\n");
|
|
|
|
|
|
|
|
static int myri10ge_ecrc_enable = 1;
|
|
|
|
module_param(myri10ge_ecrc_enable, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E\n");
|
|
|
|
|
|
|
|
static int myri10ge_max_intr_slots = 1024;
|
|
|
|
module_param(myri10ge_max_intr_slots, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_max_intr_slots, "Interrupt queue slots\n");
|
|
|
|
|
|
|
|
static int myri10ge_small_bytes = -1; /* -1 == auto */
|
|
|
|
module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
|
|
|
|
MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets\n");
|
|
|
|
|
|
|
|
static int myri10ge_msi = 1; /* enable msi by default */
|
2006-12-18 18:51:22 +08:00
|
|
|
module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
|
2006-05-23 18:10:15 +08:00
|
|
|
MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts\n");
|
|
|
|
|
2007-03-22 02:45:56 +08:00
|
|
|
static int myri10ge_intr_coal_delay = 75;
|
2006-05-23 18:10:15 +08:00
|
|
|
module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay\n");
|
|
|
|
|
|
|
|
static int myri10ge_flow_control = 1;
|
|
|
|
module_param(myri10ge_flow_control, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter\n");
|
|
|
|
|
|
|
|
static int myri10ge_deassert_wait = 1;
|
|
|
|
module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
|
|
|
|
MODULE_PARM_DESC(myri10ge_deassert_wait,
|
|
|
|
"Wait when deasserting legacy interrupts\n");
|
|
|
|
|
|
|
|
static int myri10ge_force_firmware = 0;
|
|
|
|
module_param(myri10ge_force_firmware, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_force_firmware,
|
|
|
|
"Force firmware to assume aligned completions\n");
|
|
|
|
|
|
|
|
static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
|
|
|
|
module_param(myri10ge_initial_mtu, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU\n");
|
|
|
|
|
|
|
|
static int myri10ge_napi_weight = 64;
|
|
|
|
module_param(myri10ge_napi_weight, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight\n");
|
|
|
|
|
|
|
|
static int myri10ge_watchdog_timeout = 1;
|
|
|
|
module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout\n");
|
|
|
|
|
|
|
|
static int myri10ge_max_irq_loops = 1048576;
|
|
|
|
module_param(myri10ge_max_irq_loops, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_max_irq_loops,
|
|
|
|
"Set stuck legacy IRQ detection threshold\n");
|
|
|
|
|
2006-08-22 05:36:49 +08:00
|
|
|
#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
|
|
|
|
|
|
|
|
static int myri10ge_debug = -1; /* defaults above */
|
|
|
|
module_param(myri10ge_debug, int, 0);
|
|
|
|
MODULE_PARM_DESC(myri10ge_debug, "Debug level (0=none,...,16=all)");
|
|
|
|
|
2007-09-18 02:37:42 +08:00
|
|
|
static int myri10ge_lro = 1;
|
|
|
|
module_param(myri10ge_lro, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload\n");
|
|
|
|
|
|
|
|
static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
|
|
|
|
module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_lro, "Number of LRO packets to be aggregated\n");
|
|
|
|
|
2006-12-11 18:25:09 +08:00
|
|
|
static int myri10ge_fill_thresh = 256;
|
|
|
|
module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
|
|
|
|
MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
|
|
|
|
|
2007-06-12 02:26:31 +08:00
|
|
|
static int myri10ge_reset_recover = 1;
|
|
|
|
|
2007-03-22 02:45:56 +08:00
|
|
|
static int myri10ge_wcfifo = 0;
|
2007-01-10 04:04:25 +08:00
|
|
|
module_param(myri10ge_wcfifo, int, S_IRUGO);
|
|
|
|
MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
#define MYRI10GE_FW_OFFSET 1024*1024
|
|
|
|
#define MYRI10GE_HIGHPART_TO_U32(X) \
|
|
|
|
(sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
|
|
|
|
#define MYRI10GE_LOWPART_TO_U32(X) ((u32)(X))
|
|
|
|
|
|
|
|
#define myri10ge_pio_copy(to,from,size) __iowrite64_copy(to,from,size/8)
|
|
|
|
|
2007-05-08 05:50:37 +08:00
|
|
|
static void myri10ge_set_multicast_list(struct net_device *dev);
|
2007-10-13 18:34:01 +08:00
|
|
|
static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev);
|
2007-05-08 05:50:37 +08:00
|
|
|
|
2006-12-11 18:24:37 +08:00
|
|
|
static inline void put_be32(__be32 val, __be32 __iomem * p)
|
2006-11-21 02:48:32 +08:00
|
|
|
{
|
2006-12-11 18:24:37 +08:00
|
|
|
__raw_writel((__force __u32) val, (__force void __iomem *)p);
|
2006-11-21 02:48:32 +08:00
|
|
|
}
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
static int
|
|
|
|
myri10ge_send_cmd(struct myri10ge_priv *mgp, u32 cmd,
|
|
|
|
struct myri10ge_cmd *data, int atomic)
|
|
|
|
{
|
|
|
|
struct mcp_cmd *buf;
|
|
|
|
char buf_bytes[sizeof(*buf) + 8];
|
|
|
|
struct mcp_cmd_response *response = mgp->cmd;
|
2006-08-15 05:52:54 +08:00
|
|
|
char __iomem *cmd_addr = mgp->sram + MXGEFW_ETH_CMD;
|
2006-05-23 18:10:15 +08:00
|
|
|
u32 dma_low, dma_high, result, value;
|
|
|
|
int sleep_total = 0;
|
|
|
|
|
|
|
|
/* ensure buf is aligned to 8 bytes */
|
|
|
|
buf = (struct mcp_cmd *)ALIGN((unsigned long)buf_bytes, 8);
|
|
|
|
|
|
|
|
buf->data0 = htonl(data->data0);
|
|
|
|
buf->data1 = htonl(data->data1);
|
|
|
|
buf->data2 = htonl(data->data2);
|
|
|
|
buf->cmd = htonl(cmd);
|
|
|
|
dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
|
|
|
|
dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
|
|
|
|
|
|
|
|
buf->response_addr.low = htonl(dma_low);
|
|
|
|
buf->response_addr.high = htonl(dma_high);
|
2006-11-21 02:48:32 +08:00
|
|
|
response->result = htonl(MYRI10GE_NO_RESPONSE_RESULT);
|
2006-05-23 18:10:15 +08:00
|
|
|
mb();
|
|
|
|
myri10ge_pio_copy(cmd_addr, buf, sizeof(*buf));
|
|
|
|
|
|
|
|
/* wait up to 15ms. Longest command is the DMA benchmark,
|
|
|
|
* which is capped at 5ms, but runs from a timeout handler
|
|
|
|
* that runs every 7.8ms. So a 15ms timeout leaves us with
|
|
|
|
* a 2.2ms margin
|
|
|
|
*/
|
|
|
|
if (atomic) {
|
|
|
|
/* if atomic is set, do not sleep,
|
|
|
|
* and try to get the completion quickly
|
|
|
|
* (1ms will be enough for those commands) */
|
|
|
|
for (sleep_total = 0;
|
|
|
|
sleep_total < 1000
|
2006-11-21 02:48:32 +08:00
|
|
|
&& response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
|
2006-05-23 18:10:15 +08:00
|
|
|
sleep_total += 10)
|
|
|
|
udelay(10);
|
|
|
|
} else {
|
|
|
|
/* use msleep for most command */
|
|
|
|
for (sleep_total = 0;
|
|
|
|
sleep_total < 15
|
2006-11-21 02:48:32 +08:00
|
|
|
&& response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
|
2006-05-23 18:10:15 +08:00
|
|
|
sleep_total++)
|
|
|
|
msleep(1);
|
|
|
|
}
|
|
|
|
|
|
|
|
result = ntohl(response->result);
|
|
|
|
value = ntohl(response->data);
|
|
|
|
if (result != MYRI10GE_NO_RESPONSE_RESULT) {
|
|
|
|
if (result == 0) {
|
|
|
|
data->data0 = value;
|
|
|
|
return 0;
|
2006-08-22 05:36:56 +08:00
|
|
|
} else if (result == MXGEFW_CMD_UNKNOWN) {
|
|
|
|
return -ENOSYS;
|
2007-05-08 05:52:22 +08:00
|
|
|
} else if (result == MXGEFW_CMD_ERROR_UNALIGNED) {
|
|
|
|
return -E2BIG;
|
2006-05-23 18:10:15 +08:00
|
|
|
} else {
|
|
|
|
dev_err(&mgp->pdev->dev,
|
|
|
|
"command %d failed, result = %d\n",
|
|
|
|
cmd, result);
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_err(&mgp->pdev->dev, "command %d timed out, result = %d\n",
|
|
|
|
cmd, result);
|
|
|
|
return -EAGAIN;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The eeprom strings on the lanaiX have the format
|
|
|
|
* SN=x\0
|
|
|
|
* MAC=x:x:x:x:x:x\0
|
|
|
|
* PT:ddd mmm xx xx:xx:xx xx\0
|
|
|
|
* PV:ddd mmm xx xx:xx:xx xx\0
|
|
|
|
*/
|
|
|
|
static int myri10ge_read_mac_addr(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
char *ptr, *limit;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
ptr = mgp->eeprom_strings;
|
|
|
|
limit = mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE;
|
|
|
|
|
|
|
|
while (*ptr != '\0' && ptr < limit) {
|
|
|
|
if (memcmp(ptr, "MAC=", 4) == 0) {
|
|
|
|
ptr += 4;
|
|
|
|
mgp->mac_addr_string = ptr;
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
|
|
if ((ptr + 2) > limit)
|
|
|
|
goto abort;
|
|
|
|
mgp->mac_addr[i] =
|
|
|
|
simple_strtoul(ptr, &ptr, 16);
|
|
|
|
ptr += 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (memcmp((const void *)ptr, "SN=", 3) == 0) {
|
|
|
|
ptr += 3;
|
|
|
|
mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
|
|
|
|
}
|
|
|
|
while (ptr < limit && *ptr++) ;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
abort:
|
|
|
|
dev_err(&mgp->pdev->dev, "failed to parse eeprom_strings\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable or disable periodic RDMAs from the host to make certain
|
|
|
|
* chipsets resend dropped PCIe messages
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
|
|
|
|
{
|
|
|
|
char __iomem *submit;
|
2006-11-21 02:48:32 +08:00
|
|
|
__be32 buf[16];
|
2006-05-23 18:10:15 +08:00
|
|
|
u32 dma_low, dma_high;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* clear confirmation addr */
|
|
|
|
mgp->cmd->data = 0;
|
|
|
|
mb();
|
|
|
|
|
|
|
|
/* send a rdma command to the PCIe engine, and wait for the
|
|
|
|
* response in the confirmation address. The firmware should
|
|
|
|
* write a -1 there to indicate it is alive and well
|
|
|
|
*/
|
|
|
|
dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
|
|
|
|
dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
|
|
|
|
|
|
|
|
buf[0] = htonl(dma_high); /* confirm addr MSW */
|
|
|
|
buf[1] = htonl(dma_low); /* confirm addr LSW */
|
2006-11-21 02:48:32 +08:00
|
|
|
buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
|
2006-05-23 18:10:15 +08:00
|
|
|
buf[3] = htonl(dma_high); /* dummy addr MSW */
|
|
|
|
buf[4] = htonl(dma_low); /* dummy addr LSW */
|
|
|
|
buf[5] = htonl(enable); /* enable? */
|
|
|
|
|
2006-08-15 05:52:54 +08:00
|
|
|
submit = mgp->sram + MXGEFW_BOOT_DUMMY_RDMA;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
myri10ge_pio_copy(submit, &buf, sizeof(buf));
|
|
|
|
for (i = 0; mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20; i++)
|
|
|
|
msleep(1);
|
|
|
|
if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA)
|
|
|
|
dev_err(&mgp->pdev->dev, "dummy rdma %s failed\n",
|
|
|
|
(enable ? "enable" : "disable"));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
myri10ge_validate_firmware(struct myri10ge_priv *mgp,
|
|
|
|
struct mcp_gen_header *hdr)
|
|
|
|
{
|
|
|
|
struct device *dev = &mgp->pdev->dev;
|
|
|
|
|
|
|
|
/* check firmware type */
|
|
|
|
if (ntohl(hdr->mcp_type) != MCP_TYPE_ETH) {
|
|
|
|
dev_err(dev, "Bad firmware type: 0x%x\n", ntohl(hdr->mcp_type));
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* save firmware version for ethtool */
|
|
|
|
strncpy(mgp->fw_version, hdr->version, sizeof(mgp->fw_version));
|
|
|
|
|
2007-02-22 01:05:17 +08:00
|
|
|
sscanf(mgp->fw_version, "%d.%d.%d", &mgp->fw_ver_major,
|
|
|
|
&mgp->fw_ver_minor, &mgp->fw_ver_tiny);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2007-02-22 01:05:17 +08:00
|
|
|
if (!(mgp->fw_ver_major == MXGEFW_VERSION_MAJOR
|
|
|
|
&& mgp->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
|
2006-05-23 18:10:15 +08:00
|
|
|
dev_err(dev, "Found firmware version %s\n", mgp->fw_version);
|
|
|
|
dev_err(dev, "Driver needs %d.%d\n", MXGEFW_VERSION_MAJOR,
|
|
|
|
MXGEFW_VERSION_MINOR);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_load_hotplug_firmware(struct myri10ge_priv *mgp, u32 * size)
|
|
|
|
{
|
|
|
|
unsigned crc, reread_crc;
|
|
|
|
const struct firmware *fw;
|
|
|
|
struct device *dev = &mgp->pdev->dev;
|
|
|
|
struct mcp_gen_header *hdr;
|
|
|
|
size_t hdr_offset;
|
|
|
|
int status;
|
2006-07-30 12:14:09 +08:00
|
|
|
unsigned i;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
if ((status = request_firmware(&fw, mgp->fw_name, dev)) < 0) {
|
|
|
|
dev_err(dev, "Unable to load %s firmware image via hotplug\n",
|
|
|
|
mgp->fw_name);
|
|
|
|
status = -EINVAL;
|
|
|
|
goto abort_with_nothing;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* check size */
|
|
|
|
|
|
|
|
if (fw->size >= mgp->sram_size - MYRI10GE_FW_OFFSET ||
|
|
|
|
fw->size < MCP_HEADER_PTR_OFFSET + 4) {
|
|
|
|
dev_err(dev, "Firmware size invalid:%d\n", (int)fw->size);
|
|
|
|
status = -EINVAL;
|
|
|
|
goto abort_with_fw;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* check id */
|
2006-11-21 02:48:32 +08:00
|
|
|
hdr_offset = ntohl(*(__be32 *) (fw->data + MCP_HEADER_PTR_OFFSET));
|
2006-05-23 18:10:15 +08:00
|
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw->size) {
|
|
|
|
dev_err(dev, "Bad firmware file\n");
|
|
|
|
status = -EINVAL;
|
|
|
|
goto abort_with_fw;
|
|
|
|
}
|
|
|
|
hdr = (void *)(fw->data + hdr_offset);
|
|
|
|
|
|
|
|
status = myri10ge_validate_firmware(mgp, hdr);
|
|
|
|
if (status != 0)
|
|
|
|
goto abort_with_fw;
|
|
|
|
|
|
|
|
crc = crc32(~0, fw->data, fw->size);
|
2006-07-30 12:14:09 +08:00
|
|
|
for (i = 0; i < fw->size; i += 256) {
|
|
|
|
myri10ge_pio_copy(mgp->sram + MYRI10GE_FW_OFFSET + i,
|
|
|
|
fw->data + i,
|
|
|
|
min(256U, (unsigned)(fw->size - i)));
|
|
|
|
mb();
|
|
|
|
readb(mgp->sram);
|
2006-06-08 22:25:00 +08:00
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
/* corruption checking is good for parity recovery and buggy chipset */
|
|
|
|
memcpy_fromio(fw->data, mgp->sram + MYRI10GE_FW_OFFSET, fw->size);
|
|
|
|
reread_crc = crc32(~0, fw->data, fw->size);
|
|
|
|
if (crc != reread_crc) {
|
|
|
|
dev_err(dev, "CRC failed(fw-len=%u), got 0x%x (expect 0x%x)\n",
|
|
|
|
(unsigned)fw->size, reread_crc, crc);
|
|
|
|
status = -EIO;
|
|
|
|
goto abort_with_fw;
|
|
|
|
}
|
|
|
|
*size = (u32) fw->size;
|
|
|
|
|
|
|
|
abort_with_fw:
|
|
|
|
release_firmware(fw);
|
|
|
|
|
|
|
|
abort_with_nothing:
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct mcp_gen_header *hdr;
|
|
|
|
struct device *dev = &mgp->pdev->dev;
|
|
|
|
const size_t bytes = sizeof(struct mcp_gen_header);
|
|
|
|
size_t hdr_offset;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
/* find running firmware header */
|
|
|
|
hdr_offset = ntohl(__raw_readl(mgp->sram + MCP_HEADER_PTR_OFFSET));
|
|
|
|
|
|
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > mgp->sram_size) {
|
|
|
|
dev_err(dev, "Running firmware has bad header offset (%d)\n",
|
|
|
|
(int)hdr_offset);
|
|
|
|
return -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* copy header of running firmware from SRAM to host memory to
|
|
|
|
* validate firmware */
|
|
|
|
hdr = kmalloc(bytes, GFP_KERNEL);
|
|
|
|
if (hdr == NULL) {
|
|
|
|
dev_err(dev, "could not malloc firmware hdr\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
memcpy_fromio(hdr, mgp->sram + hdr_offset, bytes);
|
|
|
|
status = myri10ge_validate_firmware(mgp, hdr);
|
|
|
|
kfree(hdr);
|
2007-02-22 01:05:17 +08:00
|
|
|
|
|
|
|
/* check to see if adopted firmware has bug where adopting
|
|
|
|
* it will cause broadcasts to be filtered unless the NIC
|
|
|
|
* is kept in ALLMULTI mode */
|
|
|
|
if (mgp->fw_ver_major == 1 && mgp->fw_ver_minor == 4 &&
|
|
|
|
mgp->fw_ver_tiny >= 4 && mgp->fw_ver_tiny <= 11) {
|
|
|
|
mgp->adopted_rx_filter_bug = 1;
|
|
|
|
dev_warn(dev, "Adopting fw %d.%d.%d: "
|
|
|
|
"working around rx filter bug\n",
|
|
|
|
mgp->fw_ver_major, mgp->fw_ver_minor,
|
|
|
|
mgp->fw_ver_tiny);
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_load_firmware(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
char __iomem *submit;
|
2006-11-21 02:48:32 +08:00
|
|
|
__be32 buf[16];
|
2006-05-23 18:10:15 +08:00
|
|
|
u32 dma_low, dma_high, size;
|
|
|
|
int status, i;
|
2007-10-13 18:34:01 +08:00
|
|
|
struct myri10ge_cmd cmd;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2006-06-08 22:25:00 +08:00
|
|
|
size = 0;
|
2006-05-23 18:10:15 +08:00
|
|
|
status = myri10ge_load_hotplug_firmware(mgp, &size);
|
|
|
|
if (status) {
|
|
|
|
dev_warn(&mgp->pdev->dev, "hotplug firmware loading failed\n");
|
|
|
|
|
|
|
|
/* Do not attempt to adopt firmware if there
|
|
|
|
* was a bad crc */
|
|
|
|
if (status == -EIO)
|
|
|
|
return status;
|
|
|
|
|
|
|
|
status = myri10ge_adopt_running_firmware(mgp);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&mgp->pdev->dev,
|
|
|
|
"failed to adopt running firmware\n");
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
dev_info(&mgp->pdev->dev,
|
|
|
|
"Successfully adopted running firmware\n");
|
|
|
|
if (mgp->tx.boundary == 4096) {
|
|
|
|
dev_warn(&mgp->pdev->dev,
|
|
|
|
"Using firmware currently running on NIC"
|
|
|
|
". For optimal\n");
|
|
|
|
dev_warn(&mgp->pdev->dev,
|
|
|
|
"performance consider loading optimized "
|
|
|
|
"firmware\n");
|
|
|
|
dev_warn(&mgp->pdev->dev, "via hotplug\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
mgp->fw_name = "adopted";
|
|
|
|
mgp->tx.boundary = 2048;
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* clear confirmation addr */
|
|
|
|
mgp->cmd->data = 0;
|
|
|
|
mb();
|
|
|
|
|
|
|
|
/* send a reload command to the bootstrap MCP, and wait for the
|
|
|
|
* response in the confirmation address. The firmware should
|
|
|
|
* write a -1 there to indicate it is alive and well
|
|
|
|
*/
|
|
|
|
dma_low = MYRI10GE_LOWPART_TO_U32(mgp->cmd_bus);
|
|
|
|
dma_high = MYRI10GE_HIGHPART_TO_U32(mgp->cmd_bus);
|
|
|
|
|
|
|
|
buf[0] = htonl(dma_high); /* confirm addr MSW */
|
|
|
|
buf[1] = htonl(dma_low); /* confirm addr LSW */
|
2006-11-21 02:48:32 +08:00
|
|
|
buf[2] = MYRI10GE_NO_CONFIRM_DATA; /* confirm data */
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* FIX: All newest firmware should un-protect the bottom of
|
|
|
|
* the sram before handoff. However, the very first interfaces
|
|
|
|
* do not. Therefore the handoff copy must skip the first 8 bytes
|
|
|
|
*/
|
|
|
|
buf[3] = htonl(MYRI10GE_FW_OFFSET + 8); /* where the code starts */
|
|
|
|
buf[4] = htonl(size - 8); /* length of code */
|
|
|
|
buf[5] = htonl(8); /* where to copy to */
|
|
|
|
buf[6] = htonl(0); /* where to jump to */
|
|
|
|
|
2006-08-15 05:52:54 +08:00
|
|
|
submit = mgp->sram + MXGEFW_BOOT_HANDOFF;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
myri10ge_pio_copy(submit, &buf, sizeof(buf));
|
|
|
|
mb();
|
|
|
|
msleep(1);
|
|
|
|
mb();
|
|
|
|
i = 0;
|
|
|
|
while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20) {
|
|
|
|
msleep(1);
|
|
|
|
i++;
|
|
|
|
}
|
|
|
|
if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
|
|
|
|
dev_err(&mgp->pdev->dev, "handoff failed\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
dev_info(&mgp->pdev->dev, "handoff confirmed\n");
|
2006-07-22 03:49:32 +08:00
|
|
|
myri10ge_dummy_rdma(mgp, 1);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2007-10-13 18:34:01 +08:00
|
|
|
/* probe for IPv6 TSO support */
|
|
|
|
mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
|
|
|
|
&cmd, 0);
|
|
|
|
if (status == 0) {
|
|
|
|
mgp->max_tso6 = cmd.data0;
|
|
|
|
mgp->features |= NETIF_F_TSO6;
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
|
|
|
|
{
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
|
|
|
|
| (addr[2] << 8) | addr[3]);
|
|
|
|
|
|
|
|
cmd.data1 = ((addr[4] << 8) | (addr[5]));
|
|
|
|
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_SET_MAC_ADDRESS, &cmd, 0);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
|
|
|
|
{
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int status, ctl;
|
|
|
|
|
|
|
|
ctl = pause ? MXGEFW_ENABLE_FLOW_CONTROL : MXGEFW_DISABLE_FLOW_CONTROL;
|
|
|
|
status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
|
|
|
|
|
|
|
|
if (status) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"myri10ge: %s: Failed to set flow control mode\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
mgp->pause = pause;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
|
|
|
|
{
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int status, ctl;
|
|
|
|
|
|
|
|
ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
|
|
|
|
status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
|
|
|
|
if (status)
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
}
|
|
|
|
|
2007-05-08 05:51:45 +08:00
|
|
|
static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int status;
|
|
|
|
u32 len;
|
2007-03-08 03:00:45 +08:00
|
|
|
struct page *dmatest_page;
|
|
|
|
dma_addr_t dmatest_bus;
|
2007-05-08 05:51:45 +08:00
|
|
|
char *test = " ";
|
|
|
|
|
|
|
|
dmatest_page = alloc_page(GFP_KERNEL);
|
|
|
|
if (!dmatest_page)
|
|
|
|
return -ENOMEM;
|
|
|
|
dmatest_bus = pci_map_page(mgp->pdev, dmatest_page, 0, PAGE_SIZE,
|
|
|
|
DMA_BIDIRECTIONAL);
|
|
|
|
|
|
|
|
/* Run a small DMA test.
|
|
|
|
* The magic multipliers to the length tell the firmware
|
|
|
|
* to do DMA read, write, or read+write tests. The
|
|
|
|
* results are returned in cmd.data0. The upper 16
|
|
|
|
* bits or the return is the number of transfers completed.
|
|
|
|
* The lower 16 bits is the time in 0.5us ticks that the
|
|
|
|
* transfers took to complete.
|
|
|
|
*/
|
|
|
|
|
|
|
|
len = mgp->tx.boundary;
|
|
|
|
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
|
|
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
|
|
|
|
cmd.data2 = len * 0x10000;
|
|
|
|
status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
|
|
|
|
if (status != 0) {
|
|
|
|
test = "read";
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
mgp->read_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
|
|
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
|
|
|
|
cmd.data2 = len * 0x1;
|
|
|
|
status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
|
|
|
|
if (status != 0) {
|
|
|
|
test = "write";
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
mgp->write_dma = ((cmd.data0 >> 16) * len * 2) / (cmd.data0 & 0xffff);
|
|
|
|
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
|
|
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
|
|
|
|
cmd.data2 = len * 0x10001;
|
|
|
|
status = myri10ge_send_cmd(mgp, test_type, &cmd, 0);
|
|
|
|
if (status != 0) {
|
|
|
|
test = "read/write";
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
mgp->read_write_dma = ((cmd.data0 >> 16) * len * 2 * 2) /
|
|
|
|
(cmd.data0 & 0xffff);
|
|
|
|
|
|
|
|
abort:
|
|
|
|
pci_unmap_page(mgp->pdev, dmatest_bus, PAGE_SIZE, DMA_BIDIRECTIONAL);
|
|
|
|
put_page(dmatest_page);
|
|
|
|
|
|
|
|
if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
|
|
|
|
dev_warn(&mgp->pdev->dev, "DMA %s benchmark failed: %d\n",
|
|
|
|
test, status);
|
|
|
|
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_reset(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int status;
|
|
|
|
size_t bytes;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* try to send a reset command to the card to see if it
|
|
|
|
* is alive */
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_RESET, &cmd, 0);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&mgp->pdev->dev, "failed reset\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
2007-05-08 05:51:45 +08:00
|
|
|
|
|
|
|
(void)myri10ge_dma_test(mgp, MXGEFW_DMA_TEST);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* Now exchange information about interrupts */
|
|
|
|
|
|
|
|
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
|
|
|
|
memset(mgp->rx_done.entry, 0, bytes);
|
|
|
|
cmd.data0 = (u32) bytes;
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
|
|
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
|
|
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA, &cmd, 0);
|
|
|
|
|
|
|
|
status |=
|
|
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
|
2006-11-21 02:48:32 +08:00
|
|
|
mgp->irq_claim = (__iomem __be32 *) (mgp->sram + cmd.data0);
|
2006-12-18 18:50:40 +08:00
|
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
|
|
|
|
&cmd, 0);
|
|
|
|
mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
status |= myri10ge_send_cmd
|
|
|
|
(mgp, MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd, 0);
|
2006-11-21 02:48:32 +08:00
|
|
|
mgp->intr_coal_delay_ptr = (__iomem __be32 *) (mgp->sram + cmd.data0);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&mgp->pdev->dev, "failed set interrupt parameters\n");
|
|
|
|
return status;
|
|
|
|
}
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
memset(mgp->rx_done.entry, 0, bytes);
|
|
|
|
|
|
|
|
/* reset mcp/driver shared state back to 0 */
|
|
|
|
mgp->tx.req = 0;
|
|
|
|
mgp->tx.done = 0;
|
|
|
|
mgp->tx.pkt_start = 0;
|
|
|
|
mgp->tx.pkt_done = 0;
|
|
|
|
mgp->rx_big.cnt = 0;
|
|
|
|
mgp->rx_small.cnt = 0;
|
|
|
|
mgp->rx_done.idx = 0;
|
|
|
|
mgp->rx_done.cnt = 0;
|
2006-08-22 05:36:49 +08:00
|
|
|
mgp->link_changes = 0;
|
2006-05-23 18:10:15 +08:00
|
|
|
status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
|
|
|
|
myri10ge_change_pause(mgp, mgp->pause);
|
2007-05-08 05:50:37 +08:00
|
|
|
myri10ge_set_multicast_list(mgp->dev);
|
2006-05-23 18:10:15 +08:00
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
myri10ge_submit_8rx(struct mcp_kreq_ether_recv __iomem * dst,
|
|
|
|
struct mcp_kreq_ether_recv *src)
|
|
|
|
{
|
2006-11-21 02:48:32 +08:00
|
|
|
__be32 low;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
low = src->addr_low;
|
2006-11-21 02:48:32 +08:00
|
|
|
src->addr_low = htonl(DMA_32BIT_MASK);
|
2006-12-06 00:26:27 +08:00
|
|
|
myri10ge_pio_copy(dst, src, 4 * sizeof(*src));
|
|
|
|
mb();
|
|
|
|
myri10ge_pio_copy(dst + 4, src + 4, 4 * sizeof(*src));
|
2006-05-23 18:10:15 +08:00
|
|
|
mb();
|
|
|
|
src->addr_low = low;
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(low, &dst->addr_low);
|
2006-05-23 18:10:15 +08:00
|
|
|
mb();
|
|
|
|
}
|
|
|
|
|
2006-11-21 02:48:32 +08:00
|
|
|
static inline void myri10ge_vlan_ip_csum(struct sk_buff *skb, __wsum hw_csum)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
|
|
|
struct vlan_hdr *vh = (struct vlan_hdr *)(skb->data);
|
|
|
|
|
2006-11-21 02:48:32 +08:00
|
|
|
if ((skb->protocol == htons(ETH_P_8021Q)) &&
|
2006-05-23 18:10:15 +08:00
|
|
|
(vh->h_vlan_encapsulated_proto == htons(ETH_P_IP) ||
|
|
|
|
vh->h_vlan_encapsulated_proto == htons(ETH_P_IPV6))) {
|
|
|
|
skb->csum = hw_csum;
|
2006-08-30 07:44:56 +08:00
|
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2006-12-11 18:25:09 +08:00
|
|
|
static inline void
|
|
|
|
myri10ge_rx_skb_build(struct sk_buff *skb, u8 * va,
|
|
|
|
struct skb_frag_struct *rx_frags, int len, int hlen)
|
|
|
|
{
|
|
|
|
struct skb_frag_struct *skb_frags;
|
|
|
|
|
|
|
|
skb->len = skb->data_len = len;
|
|
|
|
skb->truesize = len + sizeof(struct sk_buff);
|
|
|
|
/* attach the page(s) */
|
|
|
|
|
|
|
|
skb_frags = skb_shinfo(skb)->frags;
|
|
|
|
while (len > 0) {
|
|
|
|
memcpy(skb_frags, rx_frags, sizeof(*skb_frags));
|
|
|
|
len -= rx_frags->size;
|
|
|
|
skb_frags++;
|
|
|
|
rx_frags++;
|
|
|
|
skb_shinfo(skb)->nr_frags++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* pskb_may_pull is not available in irq context, but
|
|
|
|
* skb_pull() (for ether_pad and eth_type_trans()) requires
|
|
|
|
* the beginning of the packet in skb_headlen(), move it
|
|
|
|
* manually */
|
2007-03-31 22:55:19 +08:00
|
|
|
skb_copy_to_linear_data(skb, va, hlen);
|
2006-12-11 18:25:09 +08:00
|
|
|
skb_shinfo(skb)->frags[0].page_offset += hlen;
|
|
|
|
skb_shinfo(skb)->frags[0].size -= hlen;
|
|
|
|
skb->data_len -= hlen;
|
|
|
|
skb->tail += hlen;
|
|
|
|
skb_pull(skb, MXGEFW_PAD);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_alloc_rx_pages(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
|
|
|
|
int bytes, int watchdog)
|
|
|
|
{
|
|
|
|
struct page *page;
|
|
|
|
int idx;
|
|
|
|
|
|
|
|
if (unlikely(rx->watchdog_needed && !watchdog))
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* try to refill entire ring */
|
|
|
|
while (rx->fill_cnt != (rx->cnt + rx->mask + 1)) {
|
|
|
|
idx = rx->fill_cnt & rx->mask;
|
2007-04-11 03:21:08 +08:00
|
|
|
if (rx->page_offset + bytes <= MYRI10GE_ALLOC_SIZE) {
|
2006-12-11 18:25:09 +08:00
|
|
|
/* we can use part of previous page */
|
|
|
|
get_page(rx->page);
|
|
|
|
} else {
|
|
|
|
/* we need a new page */
|
|
|
|
page =
|
|
|
|
alloc_pages(GFP_ATOMIC | __GFP_COMP,
|
|
|
|
MYRI10GE_ALLOC_ORDER);
|
|
|
|
if (unlikely(page == NULL)) {
|
|
|
|
if (rx->fill_cnt - rx->cnt < 16)
|
|
|
|
rx->watchdog_needed = 1;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
rx->page = page;
|
|
|
|
rx->page_offset = 0;
|
|
|
|
rx->bus = pci_map_page(mgp->pdev, page, 0,
|
|
|
|
MYRI10GE_ALLOC_SIZE,
|
|
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
}
|
|
|
|
rx->info[idx].page = rx->page;
|
|
|
|
rx->info[idx].page_offset = rx->page_offset;
|
|
|
|
/* note that this is the address of the start of the
|
|
|
|
* page */
|
|
|
|
pci_unmap_addr_set(&rx->info[idx], bus, rx->bus);
|
|
|
|
rx->shadow[idx].addr_low =
|
|
|
|
htonl(MYRI10GE_LOWPART_TO_U32(rx->bus) + rx->page_offset);
|
|
|
|
rx->shadow[idx].addr_high =
|
|
|
|
htonl(MYRI10GE_HIGHPART_TO_U32(rx->bus));
|
|
|
|
|
|
|
|
/* start next packet on a cacheline boundary */
|
|
|
|
rx->page_offset += SKB_DATA_ALIGN(bytes);
|
2007-04-11 03:21:08 +08:00
|
|
|
|
|
|
|
#if MYRI10GE_ALLOC_SIZE > 4096
|
|
|
|
/* don't cross a 4KB boundary */
|
|
|
|
if ((rx->page_offset >> 12) !=
|
|
|
|
((rx->page_offset + bytes - 1) >> 12))
|
|
|
|
rx->page_offset = (rx->page_offset + 4096) & ~4095;
|
|
|
|
#endif
|
2006-12-11 18:25:09 +08:00
|
|
|
rx->fill_cnt++;
|
|
|
|
|
|
|
|
/* copy 8 descriptors to the firmware at a time */
|
|
|
|
if ((idx & 7) == 7) {
|
|
|
|
if (rx->wc_fifo == NULL)
|
|
|
|
myri10ge_submit_8rx(&rx->lanai[idx - 7],
|
|
|
|
&rx->shadow[idx - 7]);
|
|
|
|
else {
|
|
|
|
mb();
|
|
|
|
myri10ge_pio_copy(rx->wc_fifo,
|
|
|
|
&rx->shadow[idx - 7], 64);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
myri10ge_unmap_rx_page(struct pci_dev *pdev,
|
|
|
|
struct myri10ge_rx_buffer_state *info, int bytes)
|
|
|
|
{
|
|
|
|
/* unmap the recvd page if we're the only or last user of it */
|
|
|
|
if (bytes >= MYRI10GE_ALLOC_SIZE / 2 ||
|
|
|
|
(info->page_offset + 2 * bytes) > MYRI10GE_ALLOC_SIZE) {
|
|
|
|
pci_unmap_page(pdev, (pci_unmap_addr(info, bus)
|
|
|
|
& ~(MYRI10GE_ALLOC_SIZE - 1)),
|
|
|
|
MYRI10GE_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#define MYRI10GE_HLEN 64 /* The number of bytes to copy from a
|
|
|
|
* page into an skb */
|
|
|
|
|
|
|
|
static inline int
|
2006-12-11 18:26:12 +08:00
|
|
|
myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
|
|
|
|
int bytes, int len, __wsum csum)
|
2006-12-11 18:25:09 +08:00
|
|
|
{
|
|
|
|
struct sk_buff *skb;
|
|
|
|
struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
|
|
|
|
int i, idx, hlen, remainder;
|
|
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
struct net_device *dev = mgp->dev;
|
|
|
|
u8 *va;
|
|
|
|
|
|
|
|
len += MXGEFW_PAD;
|
|
|
|
idx = rx->cnt & rx->mask;
|
|
|
|
va = page_address(rx->info[idx].page) + rx->info[idx].page_offset;
|
|
|
|
prefetch(va);
|
|
|
|
/* Fill skb_frag_struct(s) with data from our receive */
|
|
|
|
for (i = 0, remainder = len; remainder > 0; i++) {
|
|
|
|
myri10ge_unmap_rx_page(pdev, &rx->info[idx], bytes);
|
|
|
|
rx_frags[i].page = rx->info[idx].page;
|
|
|
|
rx_frags[i].page_offset = rx->info[idx].page_offset;
|
|
|
|
if (remainder < MYRI10GE_ALLOC_SIZE)
|
|
|
|
rx_frags[i].size = remainder;
|
|
|
|
else
|
|
|
|
rx_frags[i].size = MYRI10GE_ALLOC_SIZE;
|
|
|
|
rx->cnt++;
|
|
|
|
idx = rx->cnt & rx->mask;
|
|
|
|
remainder -= MYRI10GE_ALLOC_SIZE;
|
|
|
|
}
|
|
|
|
|
2007-09-18 02:37:42 +08:00
|
|
|
if (mgp->csum_flag && myri10ge_lro) {
|
|
|
|
rx_frags[0].page_offset += MXGEFW_PAD;
|
|
|
|
rx_frags[0].size -= MXGEFW_PAD;
|
|
|
|
len -= MXGEFW_PAD;
|
|
|
|
lro_receive_frags(&mgp->rx_done.lro_mgr, rx_frags,
|
|
|
|
len, len, (void *)(unsigned long)csum, csum);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2006-12-11 18:25:09 +08:00
|
|
|
hlen = MYRI10GE_HLEN > len ? len : MYRI10GE_HLEN;
|
|
|
|
|
2007-10-13 18:32:21 +08:00
|
|
|
/* allocate an skb to attach the page(s) to. This is done
|
|
|
|
* after trying LRO, so as to avoid skb allocation overheads */
|
2006-12-11 18:25:09 +08:00
|
|
|
|
|
|
|
skb = netdev_alloc_skb(dev, MYRI10GE_HLEN + 16);
|
|
|
|
if (unlikely(skb == NULL)) {
|
|
|
|
mgp->stats.rx_dropped++;
|
|
|
|
do {
|
|
|
|
i--;
|
|
|
|
put_page(rx_frags[i].page);
|
|
|
|
} while (i != 0);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Attach the pages to the skb, and trim off any padding */
|
|
|
|
myri10ge_rx_skb_build(skb, va, rx_frags, len, hlen);
|
|
|
|
if (skb_shinfo(skb)->frags[0].size <= 0) {
|
|
|
|
put_page(skb_shinfo(skb)->frags[0].page);
|
|
|
|
skb_shinfo(skb)->nr_frags = 0;
|
|
|
|
}
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
|
|
|
|
if (mgp->csum_flag) {
|
|
|
|
if ((skb->protocol == htons(ETH_P_IP)) ||
|
|
|
|
(skb->protocol == htons(ETH_P_IPV6))) {
|
|
|
|
skb->csum = csum;
|
|
|
|
skb->ip_summed = CHECKSUM_COMPLETE;
|
|
|
|
} else
|
|
|
|
myri10ge_vlan_ip_csum(skb, csum);
|
|
|
|
}
|
|
|
|
netif_receive_skb(skb);
|
|
|
|
dev->last_rx = jiffies;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
static inline void myri10ge_tx_done(struct myri10ge_priv *mgp, int mcp_index)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
struct myri10ge_tx_buf *tx = &mgp->tx;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
int idx, len;
|
|
|
|
|
|
|
|
while (tx->pkt_done != mcp_index) {
|
|
|
|
idx = tx->done & tx->mask;
|
|
|
|
skb = tx->info[idx].skb;
|
|
|
|
|
|
|
|
/* Mark as free */
|
|
|
|
tx->info[idx].skb = NULL;
|
|
|
|
if (tx->info[idx].last) {
|
|
|
|
tx->pkt_done++;
|
|
|
|
tx->info[idx].last = 0;
|
|
|
|
}
|
|
|
|
tx->done++;
|
|
|
|
len = pci_unmap_len(&tx->info[idx], len);
|
|
|
|
pci_unmap_len_set(&tx->info[idx], len, 0);
|
|
|
|
if (skb) {
|
|
|
|
mgp->stats.tx_bytes += skb->len;
|
|
|
|
mgp->stats.tx_packets++;
|
|
|
|
dev_kfree_skb_irq(skb);
|
|
|
|
if (len)
|
|
|
|
pci_unmap_single(pdev,
|
|
|
|
pci_unmap_addr(&tx->info[idx],
|
|
|
|
bus), len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
} else {
|
|
|
|
if (len)
|
|
|
|
pci_unmap_page(pdev,
|
|
|
|
pci_unmap_addr(&tx->info[idx],
|
|
|
|
bus), len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* start the queue if we've stopped it */
|
|
|
|
if (netif_queue_stopped(mgp->dev)
|
|
|
|
&& tx->req - tx->done < (tx->mask >> 1)) {
|
|
|
|
mgp->wake_queue++;
|
|
|
|
netif_wake_queue(mgp->dev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
static inline int myri10ge_clean_rx_done(struct myri10ge_priv *mgp, int budget)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
|
|
|
struct myri10ge_rx_done *rx_done = &mgp->rx_done;
|
|
|
|
unsigned long rx_bytes = 0;
|
|
|
|
unsigned long rx_packets = 0;
|
|
|
|
unsigned long rx_ok;
|
|
|
|
|
|
|
|
int idx = rx_done->idx;
|
|
|
|
int cnt = rx_done->cnt;
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
int work_done = 0;
|
2006-05-23 18:10:15 +08:00
|
|
|
u16 length;
|
2006-11-21 02:48:32 +08:00
|
|
|
__wsum checksum;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2007-11-01 05:40:06 +08:00
|
|
|
while (rx_done->entry[idx].length != 0 && work_done < budget) {
|
2006-05-23 18:10:15 +08:00
|
|
|
length = ntohs(rx_done->entry[idx].length);
|
|
|
|
rx_done->entry[idx].length = 0;
|
2006-11-21 02:48:32 +08:00
|
|
|
checksum = csum_unfold(rx_done->entry[idx].checksum);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (length <= mgp->small_bytes)
|
2006-12-11 18:26:12 +08:00
|
|
|
rx_ok = myri10ge_rx_done(mgp, &mgp->rx_small,
|
|
|
|
mgp->small_bytes,
|
|
|
|
length, checksum);
|
2006-05-23 18:10:15 +08:00
|
|
|
else
|
2006-12-11 18:26:12 +08:00
|
|
|
rx_ok = myri10ge_rx_done(mgp, &mgp->rx_big,
|
|
|
|
mgp->big_bytes,
|
|
|
|
length, checksum);
|
2006-05-23 18:10:15 +08:00
|
|
|
rx_packets += rx_ok;
|
|
|
|
rx_bytes += rx_ok * (unsigned long)length;
|
|
|
|
cnt++;
|
|
|
|
idx = cnt & (myri10ge_max_intr_slots - 1);
|
2007-11-01 05:40:06 +08:00
|
|
|
work_done++;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
rx_done->idx = idx;
|
|
|
|
rx_done->cnt = cnt;
|
|
|
|
mgp->stats.rx_packets += rx_packets;
|
|
|
|
mgp->stats.rx_bytes += rx_bytes;
|
2006-12-11 18:25:42 +08:00
|
|
|
|
2007-09-18 02:37:42 +08:00
|
|
|
if (myri10ge_lro)
|
|
|
|
lro_flush_all(&rx_done->lro_mgr);
|
|
|
|
|
2006-12-11 18:25:42 +08:00
|
|
|
/* restock receive rings if needed */
|
|
|
|
if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt < myri10ge_fill_thresh)
|
|
|
|
myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
|
|
|
|
mgp->small_bytes + MXGEFW_PAD, 0);
|
|
|
|
if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt < myri10ge_fill_thresh)
|
|
|
|
myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
|
|
|
|
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
return work_done;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct mcp_irq_data *stats = mgp->fw_stats;
|
|
|
|
|
|
|
|
if (unlikely(stats->stats_updated)) {
|
2007-06-12 02:26:50 +08:00
|
|
|
unsigned link_up = ntohl(stats->link_up);
|
|
|
|
if (mgp->link_state != link_up) {
|
|
|
|
mgp->link_state = link_up;
|
|
|
|
|
|
|
|
if (mgp->link_state == MXGEFW_LINK_UP) {
|
2006-08-22 05:36:49 +08:00
|
|
|
if (netif_msg_link(mgp))
|
|
|
|
printk(KERN_INFO
|
|
|
|
"myri10ge: %s: link up\n",
|
|
|
|
mgp->dev->name);
|
2006-05-23 18:10:15 +08:00
|
|
|
netif_carrier_on(mgp->dev);
|
2006-08-22 05:36:49 +08:00
|
|
|
mgp->link_changes++;
|
2006-05-23 18:10:15 +08:00
|
|
|
} else {
|
2006-08-22 05:36:49 +08:00
|
|
|
if (netif_msg_link(mgp))
|
|
|
|
printk(KERN_INFO
|
2007-06-12 02:26:50 +08:00
|
|
|
"myri10ge: %s: link %s\n",
|
|
|
|
mgp->dev->name,
|
|
|
|
(link_up == MXGEFW_LINK_MYRINET ?
|
|
|
|
"mismatch (Myrinet detected)" :
|
|
|
|
"down"));
|
2006-05-23 18:10:15 +08:00
|
|
|
netif_carrier_off(mgp->dev);
|
2006-08-22 05:36:49 +08:00
|
|
|
mgp->link_changes++;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
if (mgp->rdma_tags_available !=
|
|
|
|
ntohl(mgp->fw_stats->rdma_tags_available)) {
|
|
|
|
mgp->rdma_tags_available =
|
|
|
|
ntohl(mgp->fw_stats->rdma_tags_available);
|
|
|
|
printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
|
|
|
|
"%d tags left\n", mgp->dev->name,
|
|
|
|
mgp->rdma_tags_available);
|
|
|
|
}
|
|
|
|
mgp->down_cnt += stats->link_down;
|
|
|
|
if (stats->link_down)
|
|
|
|
wake_up(&mgp->down_wq);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
static int myri10ge_poll(struct napi_struct *napi, int budget)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
2007-10-13 18:32:21 +08:00
|
|
|
struct myri10ge_priv *mgp =
|
|
|
|
container_of(napi, struct myri10ge_priv, napi);
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
struct net_device *netdev = mgp->dev;
|
|
|
|
int work_done;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* process as many rx events as NAPI will allow */
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
work_done = myri10ge_clean_rx_done(mgp, budget);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2008-01-08 12:48:21 +08:00
|
|
|
if (work_done < budget) {
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
netif_rx_complete(netdev, napi);
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(htonl(3), mgp->irq_claim);
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
return work_done;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
|
|
|
static irqreturn_t myri10ge_intr(int irq, void *arg)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = arg;
|
|
|
|
struct mcp_irq_data *stats = mgp->fw_stats;
|
|
|
|
struct myri10ge_tx_buf *tx = &mgp->tx;
|
|
|
|
u32 send_done_count;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* make sure it is our IRQ, and that the DMA has finished */
|
|
|
|
if (unlikely(!stats->valid))
|
|
|
|
return (IRQ_NONE);
|
|
|
|
|
|
|
|
/* low bit indicates receives are present, so schedule
|
|
|
|
* napi poll handler */
|
|
|
|
if (stats->valid & 1)
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
netif_rx_schedule(mgp->dev, &mgp->napi);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
if (!mgp->msi_enabled) {
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(0, mgp->irq_deassert);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (!myri10ge_deassert_wait)
|
|
|
|
stats->valid = 0;
|
|
|
|
mb();
|
|
|
|
} else
|
|
|
|
stats->valid = 0;
|
|
|
|
|
|
|
|
/* Wait for IRQ line to go low, if using INTx */
|
|
|
|
i = 0;
|
|
|
|
while (1) {
|
|
|
|
i++;
|
|
|
|
/* check for transmit completes and receives */
|
|
|
|
send_done_count = ntohl(stats->send_done_count);
|
|
|
|
if (send_done_count != tx->pkt_done)
|
|
|
|
myri10ge_tx_done(mgp, (int)send_done_count);
|
|
|
|
if (unlikely(i > myri10ge_max_irq_loops)) {
|
|
|
|
printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
stats->valid = 0;
|
|
|
|
schedule_work(&mgp->watchdog_work);
|
|
|
|
}
|
|
|
|
if (likely(stats->valid == 0))
|
|
|
|
break;
|
|
|
|
cpu_relax();
|
|
|
|
barrier();
|
|
|
|
}
|
|
|
|
|
|
|
|
myri10ge_check_statblock(mgp);
|
|
|
|
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(htonl(3), mgp->irq_claim + 1);
|
2006-05-23 18:10:15 +08:00
|
|
|
return (IRQ_HANDLED);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
|
|
|
|
{
|
|
|
|
cmd->autoneg = AUTONEG_DISABLE;
|
|
|
|
cmd->speed = SPEED_10000;
|
|
|
|
cmd->duplex = DUPLEX_FULL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *info)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
|
|
|
|
strlcpy(info->driver, "myri10ge", sizeof(info->driver));
|
|
|
|
strlcpy(info->version, MYRI10GE_VERSION_STR, sizeof(info->version));
|
|
|
|
strlcpy(info->fw_version, mgp->fw_version, sizeof(info->fw_version));
|
|
|
|
strlcpy(info->bus_info, pci_name(mgp->pdev), sizeof(info->bus_info));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
coal->rx_coalesce_usecs = mgp->intr_coal_delay;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
myri10ge_set_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
|
|
|
|
mgp->intr_coal_delay = coal->rx_coalesce_usecs;
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
|
2006-05-23 18:10:15 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_get_pauseparam(struct net_device *netdev,
|
|
|
|
struct ethtool_pauseparam *pause)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
|
|
|
|
pause->autoneg = 0;
|
|
|
|
pause->rx_pause = mgp->pause;
|
|
|
|
pause->tx_pause = mgp->pause;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
myri10ge_set_pauseparam(struct net_device *netdev,
|
|
|
|
struct ethtool_pauseparam *pause)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
|
|
|
|
if (pause->tx_pause != mgp->pause)
|
|
|
|
return myri10ge_change_pause(mgp, pause->tx_pause);
|
|
|
|
if (pause->rx_pause != mgp->pause)
|
|
|
|
return myri10ge_change_pause(mgp, pause->tx_pause);
|
|
|
|
if (pause->autoneg != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_get_ringparam(struct net_device *netdev,
|
|
|
|
struct ethtool_ringparam *ring)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
|
|
|
|
ring->rx_mini_max_pending = mgp->rx_small.mask + 1;
|
|
|
|
ring->rx_max_pending = mgp->rx_big.mask + 1;
|
|
|
|
ring->rx_jumbo_max_pending = 0;
|
|
|
|
ring->tx_max_pending = mgp->rx_small.mask + 1;
|
|
|
|
ring->rx_mini_pending = ring->rx_mini_max_pending;
|
|
|
|
ring->rx_pending = ring->rx_max_pending;
|
|
|
|
ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
|
|
|
|
ring->tx_pending = ring->tx_max_pending;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32 myri10ge_get_rx_csum(struct net_device *netdev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
if (mgp->csum_flag)
|
|
|
|
return 1;
|
|
|
|
else
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
if (csum_enabled)
|
|
|
|
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
|
|
|
|
else
|
|
|
|
mgp->csum_flag = 0;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2007-10-13 18:34:01 +08:00
|
|
|
static int myri10ge_set_tso(struct net_device *netdev, u32 tso_enabled)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
unsigned long flags = mgp->features & (NETIF_F_TSO6 | NETIF_F_TSO);
|
|
|
|
|
|
|
|
if (tso_enabled)
|
|
|
|
netdev->features |= flags;
|
|
|
|
else
|
|
|
|
netdev->features &= ~flags;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
static const char myri10ge_gstrings_stats[][ETH_GSTRING_LEN] = {
|
|
|
|
"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
|
|
|
|
"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
|
|
|
|
"rx_length_errors", "rx_over_errors", "rx_crc_errors",
|
|
|
|
"rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
|
|
|
|
"tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
|
|
|
|
"tx_heartbeat_errors", "tx_window_errors",
|
|
|
|
/* device-specific stats */
|
2006-07-04 06:16:46 +08:00
|
|
|
"tx_boundary", "WC", "irq", "MSI",
|
2006-05-23 18:10:15 +08:00
|
|
|
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
|
|
|
|
"serial_number", "tx_pkt_start", "tx_pkt_done",
|
|
|
|
"tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
|
|
|
|
"wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
|
2006-08-22 05:36:49 +08:00
|
|
|
"link_changes", "link_up", "dropped_link_overflow",
|
2007-05-08 05:49:25 +08:00
|
|
|
"dropped_link_error_or_filtered",
|
|
|
|
"dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
|
|
|
|
"dropped_unicast_filtered", "dropped_multicast_filtered",
|
2006-05-23 18:10:15 +08:00
|
|
|
"dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
|
2007-09-18 02:37:42 +08:00
|
|
|
"dropped_no_big_buffer", "LRO aggregated", "LRO flushed",
|
|
|
|
"LRO avg aggr", "LRO no_desc"
|
2006-05-23 18:10:15 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
#define MYRI10GE_NET_STATS_LEN 21
|
2007-10-18 16:00:15 +08:00
|
|
|
#define MYRI10GE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_stats)
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
|
|
|
|
{
|
|
|
|
switch (stringset) {
|
|
|
|
case ETH_SS_STATS:
|
|
|
|
memcpy(data, *myri10ge_gstrings_stats,
|
|
|
|
sizeof(myri10ge_gstrings_stats));
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-10-04 09:07:32 +08:00
|
|
|
static int myri10ge_get_sset_count(struct net_device *netdev, int sset)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
2007-10-04 09:07:32 +08:00
|
|
|
switch (sset) {
|
|
|
|
case ETH_SS_STATS:
|
|
|
|
return MYRI10GE_STATS_LEN;
|
|
|
|
default:
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
myri10ge_get_ethtool_stats(struct net_device *netdev,
|
|
|
|
struct ethtool_stats *stats, u64 * data)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
|
|
|
|
data[i] = ((unsigned long *)&mgp->stats)[i];
|
|
|
|
|
2006-07-04 06:16:46 +08:00
|
|
|
data[i++] = (unsigned int)mgp->tx.boundary;
|
2007-03-08 03:02:32 +08:00
|
|
|
data[i++] = (unsigned int)mgp->wc_enabled;
|
2006-07-04 06:16:46 +08:00
|
|
|
data[i++] = (unsigned int)mgp->pdev->irq;
|
|
|
|
data[i++] = (unsigned int)mgp->msi_enabled;
|
2006-05-23 18:10:15 +08:00
|
|
|
data[i++] = (unsigned int)mgp->read_dma;
|
|
|
|
data[i++] = (unsigned int)mgp->write_dma;
|
|
|
|
data[i++] = (unsigned int)mgp->read_write_dma;
|
|
|
|
data[i++] = (unsigned int)mgp->serial_number;
|
|
|
|
data[i++] = (unsigned int)mgp->tx.pkt_start;
|
|
|
|
data[i++] = (unsigned int)mgp->tx.pkt_done;
|
|
|
|
data[i++] = (unsigned int)mgp->tx.req;
|
|
|
|
data[i++] = (unsigned int)mgp->tx.done;
|
|
|
|
data[i++] = (unsigned int)mgp->rx_small.cnt;
|
|
|
|
data[i++] = (unsigned int)mgp->rx_big.cnt;
|
|
|
|
data[i++] = (unsigned int)mgp->wake_queue;
|
|
|
|
data[i++] = (unsigned int)mgp->stop_queue;
|
|
|
|
data[i++] = (unsigned int)mgp->watchdog_resets;
|
|
|
|
data[i++] = (unsigned int)mgp->tx_linearized;
|
2006-08-22 05:36:49 +08:00
|
|
|
data[i++] = (unsigned int)mgp->link_changes;
|
2006-05-23 18:10:15 +08:00
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->link_up);
|
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow);
|
|
|
|
data[i++] =
|
|
|
|
(unsigned int)ntohl(mgp->fw_stats->dropped_link_error_or_filtered);
|
2007-05-08 05:49:25 +08:00
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_pause);
|
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_phy);
|
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_crc32);
|
|
|
|
data[i++] =
|
|
|
|
(unsigned int)ntohl(mgp->fw_stats->dropped_unicast_filtered);
|
2006-08-22 05:36:56 +08:00
|
|
|
data[i++] =
|
|
|
|
(unsigned int)ntohl(mgp->fw_stats->dropped_multicast_filtered);
|
2006-05-23 18:10:15 +08:00
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_runt);
|
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_overrun);
|
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_small_buffer);
|
|
|
|
data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_big_buffer);
|
2007-09-18 02:37:42 +08:00
|
|
|
data[i++] = mgp->rx_done.lro_mgr.stats.aggregated;
|
|
|
|
data[i++] = mgp->rx_done.lro_mgr.stats.flushed;
|
|
|
|
if (mgp->rx_done.lro_mgr.stats.flushed)
|
|
|
|
data[i++] = mgp->rx_done.lro_mgr.stats.aggregated /
|
|
|
|
mgp->rx_done.lro_mgr.stats.flushed;
|
|
|
|
else
|
|
|
|
data[i++] = 0;
|
|
|
|
data[i++] = mgp->rx_done.lro_mgr.stats.no_desc;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
2006-08-22 05:36:49 +08:00
|
|
|
static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
mgp->msg_enable = value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static u32 myri10ge_get_msglevel(struct net_device *netdev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(netdev);
|
|
|
|
return mgp->msg_enable;
|
|
|
|
}
|
|
|
|
|
2006-09-14 02:30:00 +08:00
|
|
|
static const struct ethtool_ops myri10ge_ethtool_ops = {
|
2006-05-23 18:10:15 +08:00
|
|
|
.get_settings = myri10ge_get_settings,
|
|
|
|
.get_drvinfo = myri10ge_get_drvinfo,
|
|
|
|
.get_coalesce = myri10ge_get_coalesce,
|
|
|
|
.set_coalesce = myri10ge_set_coalesce,
|
|
|
|
.get_pauseparam = myri10ge_get_pauseparam,
|
|
|
|
.set_pauseparam = myri10ge_set_pauseparam,
|
|
|
|
.get_ringparam = myri10ge_get_ringparam,
|
|
|
|
.get_rx_csum = myri10ge_get_rx_csum,
|
|
|
|
.set_rx_csum = myri10ge_set_rx_csum,
|
2006-06-08 22:25:00 +08:00
|
|
|
.set_tx_csum = ethtool_op_set_tx_hw_csum,
|
2006-05-23 18:10:15 +08:00
|
|
|
.set_sg = ethtool_op_set_sg,
|
2007-10-13 18:34:01 +08:00
|
|
|
.set_tso = myri10ge_set_tso,
|
2007-05-31 03:13:59 +08:00
|
|
|
.get_link = ethtool_op_get_link,
|
2006-05-23 18:10:15 +08:00
|
|
|
.get_strings = myri10ge_get_strings,
|
2007-10-04 09:07:32 +08:00
|
|
|
.get_sset_count = myri10ge_get_sset_count,
|
2006-08-22 05:36:49 +08:00
|
|
|
.get_ethtool_stats = myri10ge_get_ethtool_stats,
|
|
|
|
.set_msglevel = myri10ge_set_msglevel,
|
|
|
|
.get_msglevel = myri10ge_get_msglevel
|
2006-05-23 18:10:15 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int myri10ge_allocate_rings(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int tx_ring_size, rx_ring_size;
|
|
|
|
int tx_ring_entries, rx_ring_entries;
|
|
|
|
int i, status;
|
|
|
|
size_t bytes;
|
|
|
|
|
|
|
|
mgp = netdev_priv(dev);
|
|
|
|
|
|
|
|
/* get ring sizes */
|
|
|
|
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
|
|
|
|
tx_ring_size = cmd.data0;
|
|
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
|
2007-03-08 02:59:52 +08:00
|
|
|
if (status != 0)
|
|
|
|
return status;
|
2006-05-23 18:10:15 +08:00
|
|
|
rx_ring_size = cmd.data0;
|
|
|
|
|
|
|
|
tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
|
|
|
|
rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
|
|
|
|
mgp->tx.mask = tx_ring_entries - 1;
|
|
|
|
mgp->rx_small.mask = mgp->rx_big.mask = rx_ring_entries - 1;
|
|
|
|
|
2007-03-08 02:59:52 +08:00
|
|
|
status = -ENOMEM;
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
/* allocate the host shadow rings */
|
|
|
|
|
|
|
|
bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
|
|
|
|
* sizeof(*mgp->tx.req_list);
|
|
|
|
mgp->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
|
|
|
|
if (mgp->tx.req_bytes == NULL)
|
|
|
|
goto abort_with_nothing;
|
|
|
|
|
|
|
|
/* ensure req_list entries are aligned to 8 bytes */
|
|
|
|
mgp->tx.req_list = (struct mcp_kreq_ether_send *)
|
|
|
|
ALIGN((unsigned long)mgp->tx.req_bytes, 8);
|
|
|
|
|
|
|
|
bytes = rx_ring_entries * sizeof(*mgp->rx_small.shadow);
|
|
|
|
mgp->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
|
|
|
|
if (mgp->rx_small.shadow == NULL)
|
|
|
|
goto abort_with_tx_req_bytes;
|
|
|
|
|
|
|
|
bytes = rx_ring_entries * sizeof(*mgp->rx_big.shadow);
|
|
|
|
mgp->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
|
|
|
|
if (mgp->rx_big.shadow == NULL)
|
|
|
|
goto abort_with_rx_small_shadow;
|
|
|
|
|
|
|
|
/* allocate the host info rings */
|
|
|
|
|
|
|
|
bytes = tx_ring_entries * sizeof(*mgp->tx.info);
|
|
|
|
mgp->tx.info = kzalloc(bytes, GFP_KERNEL);
|
|
|
|
if (mgp->tx.info == NULL)
|
|
|
|
goto abort_with_rx_big_shadow;
|
|
|
|
|
|
|
|
bytes = rx_ring_entries * sizeof(*mgp->rx_small.info);
|
|
|
|
mgp->rx_small.info = kzalloc(bytes, GFP_KERNEL);
|
|
|
|
if (mgp->rx_small.info == NULL)
|
|
|
|
goto abort_with_tx_info;
|
|
|
|
|
|
|
|
bytes = rx_ring_entries * sizeof(*mgp->rx_big.info);
|
|
|
|
mgp->rx_big.info = kzalloc(bytes, GFP_KERNEL);
|
|
|
|
if (mgp->rx_big.info == NULL)
|
|
|
|
goto abort_with_rx_small_info;
|
|
|
|
|
|
|
|
/* Fill the receive rings */
|
2006-12-11 18:25:42 +08:00
|
|
|
mgp->rx_big.cnt = 0;
|
|
|
|
mgp->rx_small.cnt = 0;
|
|
|
|
mgp->rx_big.fill_cnt = 0;
|
|
|
|
mgp->rx_small.fill_cnt = 0;
|
|
|
|
mgp->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
|
|
|
|
mgp->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
|
|
|
|
mgp->rx_small.watchdog_needed = 0;
|
|
|
|
mgp->rx_big.watchdog_needed = 0;
|
|
|
|
myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
|
|
|
|
mgp->small_bytes + MXGEFW_PAD, 0);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2006-12-11 18:25:42 +08:00
|
|
|
if (mgp->rx_small.fill_cnt < mgp->rx_small.mask + 1) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: alloced only %d small bufs\n",
|
|
|
|
dev->name, mgp->rx_small.fill_cnt);
|
|
|
|
goto abort_with_rx_small_ring;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
2006-12-11 18:25:42 +08:00
|
|
|
myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
|
|
|
|
if (mgp->rx_big.fill_cnt < mgp->rx_big.mask + 1) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n",
|
|
|
|
dev->name, mgp->rx_big.fill_cnt);
|
|
|
|
goto abort_with_rx_big_ring;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
abort_with_rx_big_ring:
|
2006-12-11 18:25:42 +08:00
|
|
|
for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
|
|
|
|
int idx = i & mgp->rx_big.mask;
|
|
|
|
myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
|
|
|
|
mgp->big_bytes);
|
|
|
|
put_page(mgp->rx_big.info[idx].page);
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
abort_with_rx_small_ring:
|
2006-12-11 18:25:42 +08:00
|
|
|
for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
|
|
|
|
int idx = i & mgp->rx_small.mask;
|
|
|
|
myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
|
|
|
|
mgp->small_bytes + MXGEFW_PAD);
|
|
|
|
put_page(mgp->rx_small.info[idx].page);
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
2006-12-11 18:25:42 +08:00
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
kfree(mgp->rx_big.info);
|
|
|
|
|
|
|
|
abort_with_rx_small_info:
|
|
|
|
kfree(mgp->rx_small.info);
|
|
|
|
|
|
|
|
abort_with_tx_info:
|
|
|
|
kfree(mgp->tx.info);
|
|
|
|
|
|
|
|
abort_with_rx_big_shadow:
|
|
|
|
kfree(mgp->rx_big.shadow);
|
|
|
|
|
|
|
|
abort_with_rx_small_shadow:
|
|
|
|
kfree(mgp->rx_small.shadow);
|
|
|
|
|
|
|
|
abort_with_tx_req_bytes:
|
|
|
|
kfree(mgp->tx.req_bytes);
|
|
|
|
mgp->tx.req_bytes = NULL;
|
|
|
|
mgp->tx.req_list = NULL;
|
|
|
|
|
|
|
|
abort_with_nothing:
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void myri10ge_free_rings(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
struct myri10ge_tx_buf *tx;
|
|
|
|
int i, len, idx;
|
|
|
|
|
|
|
|
mgp = netdev_priv(dev);
|
|
|
|
|
2006-12-11 18:25:42 +08:00
|
|
|
for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
|
|
|
|
idx = i & mgp->rx_big.mask;
|
|
|
|
if (i == mgp->rx_big.fill_cnt - 1)
|
|
|
|
mgp->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
|
|
|
|
myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
|
|
|
|
mgp->big_bytes);
|
|
|
|
put_page(mgp->rx_big.info[idx].page);
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
2006-12-11 18:25:42 +08:00
|
|
|
for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
|
|
|
|
idx = i & mgp->rx_small.mask;
|
|
|
|
if (i == mgp->rx_small.fill_cnt - 1)
|
|
|
|
mgp->rx_small.info[idx].page_offset =
|
|
|
|
MYRI10GE_ALLOC_SIZE;
|
|
|
|
myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
|
|
|
|
mgp->small_bytes + MXGEFW_PAD);
|
|
|
|
put_page(mgp->rx_small.info[idx].page);
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
tx = &mgp->tx;
|
|
|
|
while (tx->done != tx->req) {
|
|
|
|
idx = tx->done & tx->mask;
|
|
|
|
skb = tx->info[idx].skb;
|
|
|
|
|
|
|
|
/* Mark as free */
|
|
|
|
tx->info[idx].skb = NULL;
|
|
|
|
tx->done++;
|
|
|
|
len = pci_unmap_len(&tx->info[idx], len);
|
|
|
|
pci_unmap_len_set(&tx->info[idx], len, 0);
|
|
|
|
if (skb) {
|
|
|
|
mgp->stats.tx_dropped++;
|
|
|
|
dev_kfree_skb_any(skb);
|
|
|
|
if (len)
|
|
|
|
pci_unmap_single(mgp->pdev,
|
|
|
|
pci_unmap_addr(&tx->info[idx],
|
|
|
|
bus), len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
} else {
|
|
|
|
if (len)
|
|
|
|
pci_unmap_page(mgp->pdev,
|
|
|
|
pci_unmap_addr(&tx->info[idx],
|
|
|
|
bus), len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
kfree(mgp->rx_big.info);
|
|
|
|
|
|
|
|
kfree(mgp->rx_small.info);
|
|
|
|
|
|
|
|
kfree(mgp->tx.info);
|
|
|
|
|
|
|
|
kfree(mgp->rx_big.shadow);
|
|
|
|
|
|
|
|
kfree(mgp->rx_small.shadow);
|
|
|
|
|
|
|
|
kfree(mgp->tx.req_bytes);
|
|
|
|
mgp->tx.req_bytes = NULL;
|
|
|
|
mgp->tx.req_list = NULL;
|
|
|
|
}
|
|
|
|
|
2006-12-18 18:50:40 +08:00
|
|
|
static int myri10ge_request_irq(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
if (myri10ge_msi) {
|
|
|
|
status = pci_enable_msi(pdev);
|
|
|
|
if (status != 0)
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Error %d setting up MSI; falling back to xPIC\n",
|
|
|
|
status);
|
|
|
|
else
|
|
|
|
mgp->msi_enabled = 1;
|
|
|
|
} else {
|
|
|
|
mgp->msi_enabled = 0;
|
|
|
|
}
|
|
|
|
status = request_irq(pdev->irq, myri10ge_intr, IRQF_SHARED,
|
|
|
|
mgp->dev->name, mgp);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&pdev->dev, "failed to allocate IRQ\n");
|
|
|
|
if (mgp->msi_enabled)
|
|
|
|
pci_disable_msi(pdev);
|
|
|
|
}
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void myri10ge_free_irq(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
|
|
|
|
free_irq(pdev->irq, mgp);
|
|
|
|
if (mgp->msi_enabled)
|
|
|
|
pci_disable_msi(pdev);
|
|
|
|
}
|
|
|
|
|
2007-09-18 02:37:42 +08:00
|
|
|
static int
|
|
|
|
myri10ge_get_frag_header(struct skb_frag_struct *frag, void **mac_hdr,
|
|
|
|
void **ip_hdr, void **tcpudp_hdr,
|
|
|
|
u64 * hdr_flags, void *priv)
|
|
|
|
{
|
|
|
|
struct ethhdr *eh;
|
|
|
|
struct vlan_ethhdr *veh;
|
|
|
|
struct iphdr *iph;
|
|
|
|
u8 *va = page_address(frag->page) + frag->page_offset;
|
|
|
|
unsigned long ll_hlen;
|
|
|
|
__wsum csum = (__wsum) (unsigned long)priv;
|
|
|
|
|
|
|
|
/* find the mac header, aborting if not IPv4 */
|
|
|
|
|
|
|
|
eh = (struct ethhdr *)va;
|
|
|
|
*mac_hdr = eh;
|
|
|
|
ll_hlen = ETH_HLEN;
|
|
|
|
if (eh->h_proto != htons(ETH_P_IP)) {
|
|
|
|
if (eh->h_proto == htons(ETH_P_8021Q)) {
|
|
|
|
veh = (struct vlan_ethhdr *)va;
|
|
|
|
if (veh->h_vlan_encapsulated_proto != htons(ETH_P_IP))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
ll_hlen += VLAN_HLEN;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* HW checksum starts ETH_HLEN bytes into
|
|
|
|
* frame, so we must subtract off the VLAN
|
|
|
|
* header's checksum before csum can be used
|
|
|
|
*/
|
|
|
|
csum = csum_sub(csum, csum_partial(va + ETH_HLEN,
|
|
|
|
VLAN_HLEN, 0));
|
|
|
|
} else {
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
*hdr_flags = LRO_IPV4;
|
|
|
|
|
|
|
|
iph = (struct iphdr *)(va + ll_hlen);
|
|
|
|
*ip_hdr = iph;
|
|
|
|
if (iph->protocol != IPPROTO_TCP)
|
|
|
|
return -1;
|
|
|
|
*hdr_flags |= LRO_TCP;
|
|
|
|
*tcpudp_hdr = (u8 *) (*ip_hdr) + (iph->ihl << 2);
|
|
|
|
|
|
|
|
/* verify the IP checksum */
|
|
|
|
if (unlikely(ip_fast_csum((u8 *) iph, iph->ihl)))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
/* verify the checksum */
|
|
|
|
if (unlikely(csum_tcpudp_magic(iph->saddr, iph->daddr,
|
|
|
|
ntohs(iph->tot_len) - (iph->ihl << 2),
|
|
|
|
IPPROTO_TCP, csum)))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
static int myri10ge_open(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct myri10ge_cmd cmd;
|
2007-09-18 02:37:42 +08:00
|
|
|
struct net_lro_mgr *lro_mgr;
|
2006-05-23 18:10:15 +08:00
|
|
|
int status, big_pow2;
|
|
|
|
|
|
|
|
mgp = netdev_priv(dev);
|
|
|
|
|
|
|
|
if (mgp->running != MYRI10GE_ETH_STOPPED)
|
|
|
|
return -EBUSY;
|
|
|
|
|
|
|
|
mgp->running = MYRI10GE_ETH_STARTING;
|
|
|
|
status = myri10ge_reset(mgp);
|
|
|
|
if (status != 0) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
|
2006-12-18 18:50:40 +08:00
|
|
|
goto abort_with_nothing;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
2006-12-18 18:50:40 +08:00
|
|
|
status = myri10ge_request_irq(mgp);
|
|
|
|
if (status != 0)
|
|
|
|
goto abort_with_nothing;
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
/* decide what small buffer size to use. For good TCP rx
|
|
|
|
* performance, it is important to not receive 1514 byte
|
|
|
|
* frames into jumbo buffers, as it confuses the socket buffer
|
|
|
|
* accounting code, leading to drops and erratic performance.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if (dev->mtu <= ETH_DATA_LEN)
|
2006-12-11 18:25:42 +08:00
|
|
|
/* enough for a TCP header */
|
|
|
|
mgp->small_bytes = (128 > SMP_CACHE_BYTES)
|
|
|
|
? (128 - MXGEFW_PAD)
|
|
|
|
: (SMP_CACHE_BYTES - MXGEFW_PAD);
|
2006-05-23 18:10:15 +08:00
|
|
|
else
|
2006-12-11 18:26:38 +08:00
|
|
|
/* enough for a vlan encapsulated ETH_DATA_LEN frame */
|
|
|
|
mgp->small_bytes = VLAN_ETH_FRAME_LEN;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* Override the small buffer size? */
|
|
|
|
if (myri10ge_small_bytes > 0)
|
|
|
|
mgp->small_bytes = myri10ge_small_bytes;
|
|
|
|
|
|
|
|
/* get the lanai pointers to the send and receive rings */
|
|
|
|
|
|
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
|
|
|
|
mgp->tx.lanai =
|
|
|
|
(struct mcp_kreq_ether_send __iomem *)(mgp->sram + cmd.data0);
|
|
|
|
|
|
|
|
status |=
|
|
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET, &cmd, 0);
|
|
|
|
mgp->rx_small.lanai =
|
|
|
|
(struct mcp_kreq_ether_recv __iomem *)(mgp->sram + cmd.data0);
|
|
|
|
|
|
|
|
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
|
|
|
|
mgp->rx_big.lanai =
|
|
|
|
(struct mcp_kreq_ether_recv __iomem *)(mgp->sram + cmd.data0);
|
|
|
|
|
|
|
|
if (status != 0) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"myri10ge: %s: failed to get ring sizes or locations\n",
|
|
|
|
dev->name);
|
|
|
|
mgp->running = MYRI10GE_ETH_STOPPED;
|
2006-12-18 18:50:40 +08:00
|
|
|
goto abort_with_irq;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
2007-03-08 03:02:32 +08:00
|
|
|
if (myri10ge_wcfifo && mgp->wc_enabled) {
|
2006-08-15 05:52:54 +08:00
|
|
|
mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
|
|
|
|
mgp->rx_small.wc_fifo =
|
|
|
|
(u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
|
|
|
|
mgp->rx_big.wc_fifo =
|
|
|
|
(u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_BIG;
|
2006-05-23 18:10:15 +08:00
|
|
|
} else {
|
|
|
|
mgp->tx.wc_fifo = NULL;
|
|
|
|
mgp->rx_small.wc_fifo = NULL;
|
|
|
|
mgp->rx_big.wc_fifo = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Firmware needs the big buff size as a power of 2. Lie and
|
|
|
|
* tell him the buffer is larger, because we only use 1
|
|
|
|
* buffer/pkt, and the mtu will prevent overruns.
|
|
|
|
*/
|
2006-12-11 18:27:19 +08:00
|
|
|
big_pow2 = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
|
2006-12-11 18:25:42 +08:00
|
|
|
if (big_pow2 < MYRI10GE_ALLOC_SIZE / 2) {
|
2007-07-10 02:50:22 +08:00
|
|
|
while (!is_power_of_2(big_pow2))
|
2006-12-11 18:25:42 +08:00
|
|
|
big_pow2++;
|
2006-12-11 18:27:19 +08:00
|
|
|
mgp->big_bytes = dev->mtu + ETH_HLEN + VLAN_HLEN + MXGEFW_PAD;
|
2006-12-11 18:25:42 +08:00
|
|
|
} else {
|
|
|
|
big_pow2 = MYRI10GE_ALLOC_SIZE;
|
|
|
|
mgp->big_bytes = big_pow2;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = myri10ge_allocate_rings(dev);
|
|
|
|
if (status != 0)
|
2006-12-18 18:50:40 +08:00
|
|
|
goto abort_with_irq;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* now give firmware buffers sizes, and MTU */
|
|
|
|
cmd.data0 = dev->mtu + ETH_HLEN + VLAN_HLEN;
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_MTU, &cmd, 0);
|
|
|
|
cmd.data0 = mgp->small_bytes;
|
|
|
|
status |=
|
|
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE, &cmd, 0);
|
|
|
|
cmd.data0 = big_pow2;
|
|
|
|
status |=
|
|
|
|
myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
|
|
|
|
if (status) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
|
|
|
|
dev->name);
|
|
|
|
goto abort_with_rings;
|
|
|
|
}
|
|
|
|
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->fw_stats_bus);
|
|
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->fw_stats_bus);
|
2006-08-22 05:36:56 +08:00
|
|
|
cmd.data2 = sizeof(struct mcp_irq_data);
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
|
|
|
|
if (status == -ENOSYS) {
|
|
|
|
dma_addr_t bus = mgp->fw_stats_bus;
|
|
|
|
bus += offsetof(struct mcp_irq_data, send_done_count);
|
|
|
|
cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
|
|
|
|
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
|
|
|
|
status = myri10ge_send_cmd(mgp,
|
|
|
|
MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
|
|
|
|
&cmd, 0);
|
|
|
|
/* Firmware cannot support multicast without STATS_DMA_V2 */
|
|
|
|
mgp->fw_multicast_support = 0;
|
|
|
|
} else {
|
|
|
|
mgp->fw_multicast_support = 1;
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
if (status) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't set stats DMA\n",
|
|
|
|
dev->name);
|
|
|
|
goto abort_with_rings;
|
|
|
|
}
|
|
|
|
|
2006-11-21 02:48:32 +08:00
|
|
|
mgp->link_state = htonl(~0U);
|
2006-05-23 18:10:15 +08:00
|
|
|
mgp->rdma_tags_available = 15;
|
|
|
|
|
2007-09-18 02:37:42 +08:00
|
|
|
lro_mgr = &mgp->rx_done.lro_mgr;
|
|
|
|
lro_mgr->dev = dev;
|
|
|
|
lro_mgr->features = LRO_F_NAPI;
|
|
|
|
lro_mgr->ip_summed = CHECKSUM_COMPLETE;
|
|
|
|
lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
|
|
|
|
lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
|
|
|
|
lro_mgr->lro_arr = mgp->rx_done.lro_desc;
|
|
|
|
lro_mgr->get_frag_header = myri10ge_get_frag_header;
|
|
|
|
lro_mgr->max_aggr = myri10ge_lro_max_pkts;
|
2007-12-05 18:31:42 +08:00
|
|
|
lro_mgr->frag_align_pad = 2;
|
2007-09-18 02:37:42 +08:00
|
|
|
if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
|
|
|
|
lro_mgr->max_aggr = MAX_SKB_FRAGS;
|
|
|
|
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
napi_enable(&mgp->napi); /* must happen prior to any irq */
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
|
|
|
|
if (status) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
|
|
|
|
dev->name);
|
|
|
|
goto abort_with_rings;
|
|
|
|
}
|
|
|
|
|
|
|
|
mgp->wake_queue = 0;
|
|
|
|
mgp->stop_queue = 0;
|
|
|
|
mgp->running = MYRI10GE_ETH_RUNNING;
|
|
|
|
mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
|
|
|
|
add_timer(&mgp->watchdog_timer);
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
abort_with_rings:
|
|
|
|
myri10ge_free_rings(dev);
|
|
|
|
|
2006-12-18 18:50:40 +08:00
|
|
|
abort_with_irq:
|
|
|
|
myri10ge_free_irq(mgp);
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
abort_with_nothing:
|
|
|
|
mgp->running = MYRI10GE_ETH_STOPPED;
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_close(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
int status, old_down_cnt;
|
|
|
|
|
|
|
|
mgp = netdev_priv(dev);
|
|
|
|
|
|
|
|
if (mgp->running != MYRI10GE_ETH_RUNNING)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (mgp->tx.req_bytes == NULL)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
del_timer_sync(&mgp->watchdog_timer);
|
|
|
|
mgp->running = MYRI10GE_ETH_STOPPING;
|
[NET]: Make NAPI polling independent of struct net_device objects.
Several devices have multiple independant RX queues per net
device, and some have a single interrupt doorbell for several
queues.
In either case, it's easier to support layouts like that if the
structure representing the poll is independant from the net
device itself.
The signature of the ->poll() call back goes from:
int foo_poll(struct net_device *dev, int *budget)
to
int foo_poll(struct napi_struct *napi, int budget)
The caller is returned the number of RX packets processed (or
the number of "NAPI credits" consumed if you want to get
abstract). The callee no longer messes around bumping
dev->quota, *budget, etc. because that is all handled in the
caller upon return.
The napi_struct is to be embedded in the device driver private data
structures.
Furthermore, it is the driver's responsibility to disable all NAPI
instances in it's ->stop() device close handler. Since the
napi_struct is privatized into the driver's private data structures,
only the driver knows how to get at all of the napi_struct instances
it may have per-device.
With lots of help and suggestions from Rusty Russell, Roland Dreier,
Michael Chan, Jeff Garzik, and Jamal Hadi Salim.
Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra,
Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan.
[ Ported to current tree and all drivers converted. Integrated
Stephen's follow-on kerneldoc additions, and restored poll_list
handling to the old style to fix mutual exclusion issues. -DaveM ]
Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
|
|
|
napi_disable(&mgp->napi);
|
2006-05-23 18:10:15 +08:00
|
|
|
netif_carrier_off(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
old_down_cnt = mgp->down_cnt;
|
|
|
|
mb();
|
|
|
|
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
|
|
|
|
if (status)
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Couldn't bring down link\n",
|
|
|
|
dev->name);
|
|
|
|
|
|
|
|
wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt, HZ);
|
|
|
|
if (old_down_cnt == mgp->down_cnt)
|
|
|
|
printk(KERN_ERR "myri10ge: %s never got down irq\n", dev->name);
|
|
|
|
|
|
|
|
netif_tx_disable(dev);
|
2006-12-18 18:50:40 +08:00
|
|
|
myri10ge_free_irq(mgp);
|
2006-05-23 18:10:15 +08:00
|
|
|
myri10ge_free_rings(dev);
|
|
|
|
|
|
|
|
mgp->running = MYRI10GE_ETH_STOPPED;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
|
|
|
|
* backwards one at a time and handle ring wraps */
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
myri10ge_submit_req_backwards(struct myri10ge_tx_buf *tx,
|
|
|
|
struct mcp_kreq_ether_send *src, int cnt)
|
|
|
|
{
|
|
|
|
int idx, starting_slot;
|
|
|
|
starting_slot = tx->req;
|
|
|
|
while (cnt > 1) {
|
|
|
|
cnt--;
|
|
|
|
idx = (starting_slot + cnt) & tx->mask;
|
|
|
|
myri10ge_pio_copy(&tx->lanai[idx], &src[cnt], sizeof(*src));
|
|
|
|
mb();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* copy an array of struct mcp_kreq_ether_send's to the mcp. Copy
|
|
|
|
* at most 32 bytes at a time, so as to avoid involving the software
|
|
|
|
* pio handler in the nic. We re-write the first segment's flags
|
|
|
|
* to mark them valid only after writing the entire chain.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
myri10ge_submit_req(struct myri10ge_tx_buf *tx, struct mcp_kreq_ether_send *src,
|
|
|
|
int cnt)
|
|
|
|
{
|
|
|
|
int idx, i;
|
|
|
|
struct mcp_kreq_ether_send __iomem *dstp, *dst;
|
|
|
|
struct mcp_kreq_ether_send *srcp;
|
|
|
|
u8 last_flags;
|
|
|
|
|
|
|
|
idx = tx->req & tx->mask;
|
|
|
|
|
|
|
|
last_flags = src->flags;
|
|
|
|
src->flags = 0;
|
|
|
|
mb();
|
|
|
|
dst = dstp = &tx->lanai[idx];
|
|
|
|
srcp = src;
|
|
|
|
|
|
|
|
if ((idx + cnt) < tx->mask) {
|
|
|
|
for (i = 0; i < (cnt - 1); i += 2) {
|
|
|
|
myri10ge_pio_copy(dstp, srcp, 2 * sizeof(*src));
|
|
|
|
mb(); /* force write every 32 bytes */
|
|
|
|
srcp += 2;
|
|
|
|
dstp += 2;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* submit all but the first request, and ensure
|
|
|
|
* that it is submitted below */
|
|
|
|
myri10ge_submit_req_backwards(tx, src, cnt);
|
|
|
|
i = 0;
|
|
|
|
}
|
|
|
|
if (i < cnt) {
|
|
|
|
/* submit the first request */
|
|
|
|
myri10ge_pio_copy(dstp, srcp, sizeof(*src));
|
|
|
|
mb(); /* barrier before setting valid flag */
|
|
|
|
}
|
|
|
|
|
|
|
|
/* re-write the last 32-bits with the valid flags */
|
|
|
|
src->flags = last_flags;
|
2006-11-21 02:48:32 +08:00
|
|
|
put_be32(*((__be32 *) src + 3), (__be32 __iomem *) dst + 3);
|
2006-05-23 18:10:15 +08:00
|
|
|
tx->req += cnt;
|
|
|
|
mb();
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void
|
|
|
|
myri10ge_submit_req_wc(struct myri10ge_tx_buf *tx,
|
|
|
|
struct mcp_kreq_ether_send *src, int cnt)
|
|
|
|
{
|
|
|
|
tx->req += cnt;
|
|
|
|
mb();
|
|
|
|
while (cnt >= 4) {
|
|
|
|
myri10ge_pio_copy(tx->wc_fifo, src, 64);
|
|
|
|
mb();
|
|
|
|
src += 4;
|
|
|
|
cnt -= 4;
|
|
|
|
}
|
|
|
|
if (cnt > 0) {
|
|
|
|
/* pad it to 64 bytes. The src is 64 bytes bigger than it
|
|
|
|
* needs to be so that we don't overrun it */
|
2006-08-15 05:52:54 +08:00
|
|
|
myri10ge_pio_copy(tx->wc_fifo + MXGEFW_ETH_SEND_OFFSET(cnt),
|
|
|
|
src, 64);
|
2006-05-23 18:10:15 +08:00
|
|
|
mb();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Transmit a packet. We need to split the packet so that a single
|
|
|
|
* segment does not cross myri10ge->tx.boundary, so this makes segment
|
|
|
|
* counting tricky. So rather than try to count segments up front, we
|
|
|
|
* just give up if there are too few segments to hold a reasonably
|
|
|
|
* fragmented packet currently available. If we run
|
|
|
|
* out of segments while preparing a packet for DMA, we just linearize
|
|
|
|
* it and try again.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
|
|
struct mcp_kreq_ether_send *req;
|
|
|
|
struct myri10ge_tx_buf *tx = &mgp->tx;
|
|
|
|
struct skb_frag_struct *frag;
|
|
|
|
dma_addr_t bus;
|
2006-11-21 02:48:32 +08:00
|
|
|
u32 low;
|
|
|
|
__be32 high_swapped;
|
2006-05-23 18:10:15 +08:00
|
|
|
unsigned int len;
|
|
|
|
int idx, last_idx, avail, frag_cnt, frag_idx, count, mss, max_segments;
|
|
|
|
u16 pseudo_hdr_offset, cksum_offset;
|
|
|
|
int cum_len, seglen, boundary, rdma_count;
|
|
|
|
u8 flags, odd_flag;
|
|
|
|
|
|
|
|
again:
|
|
|
|
req = tx->req_list;
|
|
|
|
avail = tx->mask - 1 - (tx->req - tx->done);
|
|
|
|
|
|
|
|
mss = 0;
|
|
|
|
max_segments = MXGEFW_MAX_SEND_DESC;
|
|
|
|
|
2007-03-28 03:54:53 +08:00
|
|
|
if (skb_is_gso(skb)) {
|
2006-06-22 17:40:14 +08:00
|
|
|
mss = skb_shinfo(skb)->gso_size;
|
2007-03-28 03:54:53 +08:00
|
|
|
max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
if ((unlikely(avail < max_segments))) {
|
|
|
|
/* we are out of transmit resources */
|
|
|
|
mgp->stop_queue++;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Setup checksum offloading, if needed */
|
|
|
|
cksum_offset = 0;
|
|
|
|
pseudo_hdr_offset = 0;
|
|
|
|
odd_flag = 0;
|
|
|
|
flags = (MXGEFW_FLAGS_NO_TSO | MXGEFW_FLAGS_FIRST);
|
2006-08-30 07:44:56 +08:00
|
|
|
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
|
2007-04-26 08:55:53 +08:00
|
|
|
cksum_offset = skb_transport_offset(skb);
|
2006-11-21 10:07:29 +08:00
|
|
|
pseudo_hdr_offset = cksum_offset + skb->csum_offset;
|
2006-05-23 18:10:15 +08:00
|
|
|
/* If the headers are excessively large, then we must
|
|
|
|
* fall back to a software checksum */
|
2007-10-13 18:34:01 +08:00
|
|
|
if (unlikely(!mss && (cksum_offset > 255 ||
|
|
|
|
pseudo_hdr_offset > 127))) {
|
2006-08-30 07:44:56 +08:00
|
|
|
if (skb_checksum_help(skb))
|
2006-05-23 18:10:15 +08:00
|
|
|
goto drop;
|
|
|
|
cksum_offset = 0;
|
|
|
|
pseudo_hdr_offset = 0;
|
|
|
|
} else {
|
|
|
|
odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
|
|
|
|
flags |= MXGEFW_FLAGS_CKSUM;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
cum_len = 0;
|
|
|
|
|
|
|
|
if (mss) { /* TSO */
|
|
|
|
/* this removes any CKSUM flag from before */
|
|
|
|
flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
|
|
|
|
|
|
|
|
/* negative cum_len signifies to the
|
|
|
|
* send loop that we are still in the
|
|
|
|
* header portion of the TSO packet.
|
2007-10-13 18:34:01 +08:00
|
|
|
* TSO header can be at most 1KB long */
|
2007-03-19 08:43:48 +08:00
|
|
|
cum_len = -(skb_transport_offset(skb) + tcp_hdrlen(skb));
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2007-10-13 18:34:01 +08:00
|
|
|
/* for IPv6 TSO, the checksum offset stores the
|
|
|
|
* TCP header length, to save the firmware from
|
|
|
|
* the need to parse the headers */
|
|
|
|
if (skb_is_gso_v6(skb)) {
|
|
|
|
cksum_offset = tcp_hdrlen(skb);
|
|
|
|
/* Can only handle headers <= max_tso6 long */
|
|
|
|
if (unlikely(-cum_len > mgp->max_tso6))
|
|
|
|
return myri10ge_sw_tso(skb, dev);
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
/* for TSO, pseudo_hdr_offset holds mss.
|
|
|
|
* The firmware figures out where to put
|
|
|
|
* the checksum by parsing the header. */
|
2006-11-21 02:48:32 +08:00
|
|
|
pseudo_hdr_offset = mss;
|
2006-05-23 18:10:15 +08:00
|
|
|
} else
|
|
|
|
/* Mark small packets, and pad out tiny packets */
|
|
|
|
if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
|
|
|
|
flags |= MXGEFW_FLAGS_SMALL;
|
|
|
|
|
|
|
|
/* pad frames to at least ETH_ZLEN bytes */
|
|
|
|
if (unlikely(skb->len < ETH_ZLEN)) {
|
2006-06-23 17:06:41 +08:00
|
|
|
if (skb_padto(skb, ETH_ZLEN)) {
|
2006-05-23 18:10:15 +08:00
|
|
|
/* The packet is gone, so we must
|
|
|
|
* return 0 */
|
|
|
|
mgp->stats.tx_dropped += 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* adjust the len to account for the zero pad
|
|
|
|
* so that the nic can know how long it is */
|
|
|
|
skb->len = ETH_ZLEN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* map the skb for DMA */
|
|
|
|
len = skb->len - skb->data_len;
|
|
|
|
idx = tx->req & tx->mask;
|
|
|
|
tx->info[idx].skb = skb;
|
|
|
|
bus = pci_map_single(mgp->pdev, skb->data, len, PCI_DMA_TODEVICE);
|
|
|
|
pci_unmap_addr_set(&tx->info[idx], bus, bus);
|
|
|
|
pci_unmap_len_set(&tx->info[idx], len, len);
|
|
|
|
|
|
|
|
frag_cnt = skb_shinfo(skb)->nr_frags;
|
|
|
|
frag_idx = 0;
|
|
|
|
count = 0;
|
|
|
|
rdma_count = 0;
|
|
|
|
|
|
|
|
/* "rdma_count" is the number of RDMAs belonging to the
|
|
|
|
* current packet BEFORE the current send request. For
|
|
|
|
* non-TSO packets, this is equal to "count".
|
|
|
|
* For TSO packets, rdma_count needs to be reset
|
|
|
|
* to 0 after a segment cut.
|
|
|
|
*
|
|
|
|
* The rdma_count field of the send request is
|
|
|
|
* the number of RDMAs of the packet starting at
|
|
|
|
* that request. For TSO send requests with one ore more cuts
|
|
|
|
* in the middle, this is the number of RDMAs starting
|
|
|
|
* after the last cut in the request. All previous
|
|
|
|
* segments before the last cut implicitly have 1 RDMA.
|
|
|
|
*
|
|
|
|
* Since the number of RDMAs is not known beforehand,
|
|
|
|
* it must be filled-in retroactively - after each
|
|
|
|
* segmentation cut or at the end of the entire packet.
|
|
|
|
*/
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
/* Break the SKB or Fragment up into pieces which
|
|
|
|
* do not cross mgp->tx.boundary */
|
|
|
|
low = MYRI10GE_LOWPART_TO_U32(bus);
|
|
|
|
high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
|
|
|
|
while (len) {
|
|
|
|
u8 flags_next;
|
|
|
|
int cum_len_next;
|
|
|
|
|
|
|
|
if (unlikely(count == max_segments))
|
|
|
|
goto abort_linearize;
|
|
|
|
|
|
|
|
boundary = (low + tx->boundary) & ~(tx->boundary - 1);
|
|
|
|
seglen = boundary - low;
|
|
|
|
if (seglen > len)
|
|
|
|
seglen = len;
|
|
|
|
flags_next = flags & ~MXGEFW_FLAGS_FIRST;
|
|
|
|
cum_len_next = cum_len + seglen;
|
|
|
|
if (mss) { /* TSO */
|
|
|
|
(req - rdma_count)->rdma_count = rdma_count + 1;
|
|
|
|
|
|
|
|
if (likely(cum_len >= 0)) { /* payload */
|
|
|
|
int next_is_first, chop;
|
|
|
|
|
|
|
|
chop = (cum_len_next > mss);
|
|
|
|
cum_len_next = cum_len_next % mss;
|
|
|
|
next_is_first = (cum_len_next == 0);
|
|
|
|
flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
|
|
|
|
flags_next |= next_is_first *
|
|
|
|
MXGEFW_FLAGS_FIRST;
|
|
|
|
rdma_count |= -(chop | next_is_first);
|
|
|
|
rdma_count += chop & !next_is_first;
|
|
|
|
} else if (likely(cum_len_next >= 0)) { /* header ends */
|
|
|
|
int small;
|
|
|
|
|
|
|
|
rdma_count = -1;
|
|
|
|
cum_len_next = 0;
|
|
|
|
seglen = -cum_len;
|
|
|
|
small = (mss <= MXGEFW_SEND_SMALL_SIZE);
|
|
|
|
flags_next = MXGEFW_FLAGS_TSO_PLD |
|
|
|
|
MXGEFW_FLAGS_FIRST |
|
|
|
|
(small * MXGEFW_FLAGS_SMALL);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
req->addr_high = high_swapped;
|
|
|
|
req->addr_low = htonl(low);
|
2006-11-21 02:48:32 +08:00
|
|
|
req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
|
2006-05-23 18:10:15 +08:00
|
|
|
req->pad = 0; /* complete solid 16-byte block; does this matter? */
|
|
|
|
req->rdma_count = 1;
|
|
|
|
req->length = htons(seglen);
|
|
|
|
req->cksum_offset = cksum_offset;
|
|
|
|
req->flags = flags | ((cum_len & 1) * odd_flag);
|
|
|
|
|
|
|
|
low += seglen;
|
|
|
|
len -= seglen;
|
|
|
|
cum_len = cum_len_next;
|
|
|
|
flags = flags_next;
|
|
|
|
req++;
|
|
|
|
count++;
|
|
|
|
rdma_count++;
|
2007-10-13 18:34:01 +08:00
|
|
|
if (cksum_offset != 0 && !(mss && skb_is_gso_v6(skb))) {
|
|
|
|
if (unlikely(cksum_offset > seglen))
|
|
|
|
cksum_offset -= seglen;
|
|
|
|
else
|
|
|
|
cksum_offset = 0;
|
|
|
|
}
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
if (frag_idx == frag_cnt)
|
|
|
|
break;
|
|
|
|
|
|
|
|
/* map next fragment for DMA */
|
|
|
|
idx = (count + tx->req) & tx->mask;
|
|
|
|
frag = &skb_shinfo(skb)->frags[frag_idx];
|
|
|
|
frag_idx++;
|
|
|
|
len = frag->size;
|
|
|
|
bus = pci_map_page(mgp->pdev, frag->page, frag->page_offset,
|
|
|
|
len, PCI_DMA_TODEVICE);
|
|
|
|
pci_unmap_addr_set(&tx->info[idx], bus, bus);
|
|
|
|
pci_unmap_len_set(&tx->info[idx], len, len);
|
|
|
|
}
|
|
|
|
|
|
|
|
(req - rdma_count)->rdma_count = rdma_count;
|
|
|
|
if (mss)
|
|
|
|
do {
|
|
|
|
req--;
|
|
|
|
req->flags |= MXGEFW_FLAGS_TSO_LAST;
|
|
|
|
} while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
|
|
|
|
MXGEFW_FLAGS_FIRST)));
|
|
|
|
idx = ((count - 1) + tx->req) & tx->mask;
|
|
|
|
tx->info[idx].last = 1;
|
|
|
|
if (tx->wc_fifo == NULL)
|
|
|
|
myri10ge_submit_req(tx, tx->req_list, count);
|
|
|
|
else
|
|
|
|
myri10ge_submit_req_wc(tx, tx->req_list, count);
|
|
|
|
tx->pkt_start++;
|
|
|
|
if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
|
|
|
|
mgp->stop_queue++;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
}
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
abort_linearize:
|
|
|
|
/* Free any DMA resources we've alloced and clear out the skb
|
|
|
|
* slot so as to not trip up assertions, and to avoid a
|
|
|
|
* double-free if linearizing fails */
|
|
|
|
|
|
|
|
last_idx = (idx + 1) & tx->mask;
|
|
|
|
idx = tx->req & tx->mask;
|
|
|
|
tx->info[idx].skb = NULL;
|
|
|
|
do {
|
|
|
|
len = pci_unmap_len(&tx->info[idx], len);
|
|
|
|
if (len) {
|
|
|
|
if (tx->info[idx].skb != NULL)
|
|
|
|
pci_unmap_single(mgp->pdev,
|
|
|
|
pci_unmap_addr(&tx->info[idx],
|
|
|
|
bus), len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
else
|
|
|
|
pci_unmap_page(mgp->pdev,
|
|
|
|
pci_unmap_addr(&tx->info[idx],
|
|
|
|
bus), len,
|
|
|
|
PCI_DMA_TODEVICE);
|
|
|
|
pci_unmap_len_set(&tx->info[idx], len, 0);
|
|
|
|
tx->info[idx].skb = NULL;
|
|
|
|
}
|
|
|
|
idx = (idx + 1) & tx->mask;
|
|
|
|
} while (idx != last_idx);
|
2006-07-09 04:34:32 +08:00
|
|
|
if (skb_is_gso(skb)) {
|
2006-05-23 18:10:15 +08:00
|
|
|
printk(KERN_ERR
|
|
|
|
"myri10ge: %s: TSO but wanted to linearize?!?!?\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
goto drop;
|
|
|
|
}
|
|
|
|
|
2006-06-23 05:47:19 +08:00
|
|
|
if (skb_linearize(skb))
|
2006-05-23 18:10:15 +08:00
|
|
|
goto drop;
|
|
|
|
|
|
|
|
mgp->tx_linearized++;
|
|
|
|
goto again;
|
|
|
|
|
|
|
|
drop:
|
|
|
|
dev_kfree_skb_any(skb);
|
|
|
|
mgp->stats.tx_dropped += 1;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
2007-10-13 18:34:01 +08:00
|
|
|
static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct sk_buff *segs, *curr;
|
|
|
|
struct myri10ge_priv *mgp = dev->priv;
|
|
|
|
int status;
|
|
|
|
|
|
|
|
segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
|
|
|
|
if (unlikely(IS_ERR(segs)))
|
|
|
|
goto drop;
|
|
|
|
|
|
|
|
while (segs) {
|
|
|
|
curr = segs;
|
|
|
|
segs = segs->next;
|
|
|
|
curr->next = NULL;
|
|
|
|
status = myri10ge_xmit(curr, dev);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_kfree_skb_any(curr);
|
|
|
|
if (segs != NULL) {
|
|
|
|
curr = segs;
|
|
|
|
segs = segs->next;
|
|
|
|
curr->next = NULL;
|
|
|
|
dev_kfree_skb_any(segs);
|
|
|
|
}
|
|
|
|
goto drop;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
dev_kfree_skb_any(skb);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
drop:
|
|
|
|
dev_kfree_skb_any(skb);
|
|
|
|
mgp->stats.tx_dropped += 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
static struct net_device_stats *myri10ge_get_stats(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
|
|
return &mgp->stats;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void myri10ge_set_multicast_list(struct net_device *dev)
|
|
|
|
{
|
2006-08-22 05:36:56 +08:00
|
|
|
struct myri10ge_cmd cmd;
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct dev_mc_list *mc_list;
|
2006-12-11 18:24:37 +08:00
|
|
|
__be32 data[2] = { 0, 0 };
|
2006-08-22 05:36:56 +08:00
|
|
|
int err;
|
2007-10-04 08:59:30 +08:00
|
|
|
DECLARE_MAC_BUF(mac);
|
2006-08-22 05:36:56 +08:00
|
|
|
|
|
|
|
mgp = netdev_priv(dev);
|
2006-05-23 18:10:15 +08:00
|
|
|
/* can be called from atomic contexts,
|
|
|
|
* pass 1 to force atomicity in myri10ge_send_cmd() */
|
2006-08-22 05:36:56 +08:00
|
|
|
myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
|
|
|
|
|
|
|
|
/* This firmware is known to not support multicast */
|
2007-05-08 05:50:37 +08:00
|
|
|
if (!mgp->fw_multicast_support)
|
2006-08-22 05:36:56 +08:00
|
|
|
return;
|
|
|
|
|
|
|
|
/* Disable multicast filtering */
|
|
|
|
|
|
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
|
|
|
|
if (err != 0) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
|
|
|
|
" error status: %d\n", dev->name, err);
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
|
2007-05-08 05:50:37 +08:00
|
|
|
if ((dev->flags & IFF_ALLMULTI) || mgp->adopted_rx_filter_bug) {
|
2006-08-22 05:36:56 +08:00
|
|
|
/* request to disable multicast filtering, so quit here */
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Flush the filters */
|
|
|
|
|
|
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
|
|
|
|
&cmd, 1);
|
|
|
|
if (err != 0) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
|
|
|
|
", error status: %d\n", dev->name, err);
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Walk the multicast list, and add each address */
|
|
|
|
for (mc_list = dev->mc_list; mc_list != NULL; mc_list = mc_list->next) {
|
2006-11-21 02:48:32 +08:00
|
|
|
memcpy(data, &mc_list->dmi_addr, 6);
|
|
|
|
cmd.data0 = ntohl(data[0]);
|
|
|
|
cmd.data1 = ntohl(data[1]);
|
2006-08-22 05:36:56 +08:00
|
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_JOIN_MULTICAST_GROUP,
|
|
|
|
&cmd, 1);
|
|
|
|
|
|
|
|
if (err != 0) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Failed "
|
|
|
|
"MXGEFW_JOIN_MULTICAST_GROUP, error status:"
|
|
|
|
"%d\t", dev->name, err);
|
2007-10-04 08:59:30 +08:00
|
|
|
printk(KERN_ERR "MAC %s\n",
|
|
|
|
print_mac(mac, mc_list->dmi_addr));
|
2006-08-22 05:36:56 +08:00
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Enable multicast filtering */
|
|
|
|
err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
|
|
|
|
if (err != 0) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
|
|
|
|
"error status: %d\n", dev->name, err);
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
abort:
|
|
|
|
return;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
|
|
|
|
{
|
|
|
|
struct sockaddr *sa = addr;
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
|
|
int status;
|
|
|
|
|
|
|
|
if (!is_valid_ether_addr(sa->sa_data))
|
|
|
|
return -EADDRNOTAVAIL;
|
|
|
|
|
|
|
|
status = myri10ge_update_mac_address(mgp, sa->sa_data);
|
|
|
|
if (status != 0) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"myri10ge: %s: changing mac address failed with %d\n",
|
|
|
|
dev->name, status);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* change the dev structure */
|
|
|
|
memcpy(dev->dev_addr, sa->sa_data, 6);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp = netdev_priv(dev);
|
|
|
|
int error = 0;
|
|
|
|
|
|
|
|
if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
|
|
|
|
dev->name, new_mtu);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
printk(KERN_INFO "%s: changing mtu from %d to %d\n",
|
|
|
|
dev->name, dev->mtu, new_mtu);
|
|
|
|
if (mgp->running) {
|
|
|
|
/* if we change the mtu on an active device, we must
|
|
|
|
* reset the device so the firmware sees the change */
|
|
|
|
myri10ge_close(dev);
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
myri10ge_open(dev);
|
|
|
|
} else
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable ECRC to align PCI-E Completion packets on an 8-byte boundary.
|
|
|
|
* Only do it if the bridge is a root port since we don't want to disturb
|
|
|
|
* any other device, except if forced with myri10ge_ecrc_enable > 1.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void myri10ge_enable_ecrc(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct pci_dev *bridge = mgp->pdev->bus->self;
|
|
|
|
struct device *dev = &mgp->pdev->dev;
|
|
|
|
unsigned cap;
|
|
|
|
unsigned err_cap;
|
|
|
|
u16 val;
|
|
|
|
u8 ext_type;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (!myri10ge_ecrc_enable || !bridge)
|
|
|
|
return;
|
|
|
|
|
|
|
|
/* check that the bridge is a root port */
|
|
|
|
cap = pci_find_capability(bridge, PCI_CAP_ID_EXP);
|
|
|
|
pci_read_config_word(bridge, cap + PCI_CAP_FLAGS, &val);
|
|
|
|
ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
|
|
|
|
if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
|
|
|
|
if (myri10ge_ecrc_enable > 1) {
|
|
|
|
struct pci_dev *old_bridge = bridge;
|
|
|
|
|
|
|
|
/* Walk the hierarchy up to the root port
|
|
|
|
* where ECRC has to be enabled */
|
|
|
|
do {
|
|
|
|
bridge = bridge->bus->self;
|
|
|
|
if (!bridge) {
|
|
|
|
dev_err(dev,
|
|
|
|
"Failed to find root port"
|
|
|
|
" to force ECRC\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
cap =
|
|
|
|
pci_find_capability(bridge, PCI_CAP_ID_EXP);
|
|
|
|
pci_read_config_word(bridge,
|
|
|
|
cap + PCI_CAP_FLAGS, &val);
|
|
|
|
ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
|
|
|
|
} while (ext_type != PCI_EXP_TYPE_ROOT_PORT);
|
|
|
|
|
|
|
|
dev_info(dev,
|
|
|
|
"Forcing ECRC on non-root port %s"
|
|
|
|
" (enabling on root port %s)\n",
|
|
|
|
pci_name(old_bridge), pci_name(bridge));
|
|
|
|
} else {
|
|
|
|
dev_err(dev,
|
|
|
|
"Not enabling ECRC on non-root port %s\n",
|
|
|
|
pci_name(bridge));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
cap = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ERR);
|
|
|
|
if (!cap)
|
|
|
|
return;
|
|
|
|
|
|
|
|
ret = pci_read_config_dword(bridge, cap + PCI_ERR_CAP, &err_cap);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed reading ext-conf-space of %s\n",
|
|
|
|
pci_name(bridge));
|
|
|
|
dev_err(dev, "\t pci=nommconf in use? "
|
|
|
|
"or buggy/incomplete/absent ACPI MCFG attr?\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
if (!(err_cap & PCI_ERR_CAP_ECRC_GENC))
|
|
|
|
return;
|
|
|
|
|
|
|
|
err_cap |= PCI_ERR_CAP_ECRC_GENE;
|
|
|
|
pci_write_config_dword(bridge, cap + PCI_ERR_CAP, err_cap);
|
|
|
|
dev_info(dev, "Enabled ECRC on upstream bridge %s\n", pci_name(bridge));
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
|
|
|
|
* when the PCI-E Completion packets are aligned on an 8-byte
|
|
|
|
* boundary. Some PCI-E chip sets always align Completion packets; on
|
|
|
|
* the ones that do not, the alignment can be enforced by enabling
|
|
|
|
* ECRC generation (if supported).
|
|
|
|
*
|
|
|
|
* When PCI-E Completion packets are not aligned, it is actually more
|
|
|
|
* efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
|
|
|
|
*
|
|
|
|
* If the driver can neither enable ECRC nor verify that it has
|
|
|
|
* already been enabled, then it must use a firmware image which works
|
|
|
|
* around unaligned completion packets (myri10ge_ethp_z8e.dat), and it
|
|
|
|
* should also ensure that it never gives the device a Read-DMA which is
|
|
|
|
* larger than 2KB by setting the tx.boundary to 2KB. If ECRC is
|
|
|
|
* enabled, then the driver should use the aligned (myri10ge_eth_z8e.dat)
|
|
|
|
* firmware image, and set tx.boundary to 4KB.
|
|
|
|
*/
|
|
|
|
|
2007-05-08 05:52:22 +08:00
|
|
|
static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
2007-05-08 05:52:22 +08:00
|
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
struct device *dev = &pdev->dev;
|
2007-08-24 14:57:17 +08:00
|
|
|
int status;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2007-05-08 05:52:22 +08:00
|
|
|
mgp->tx.boundary = 4096;
|
|
|
|
/*
|
|
|
|
* Verify the max read request size was set to 4KB
|
|
|
|
* before trying the test with 4KB.
|
|
|
|
*/
|
2007-08-24 14:57:17 +08:00
|
|
|
status = pcie_get_readrq(pdev);
|
|
|
|
if (status < 0) {
|
2007-05-08 05:52:22 +08:00
|
|
|
dev_err(dev, "Couldn't read max read req size: %d\n", status);
|
|
|
|
goto abort;
|
|
|
|
}
|
2007-08-24 14:57:17 +08:00
|
|
|
if (status != 4096) {
|
|
|
|
dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
|
2007-05-08 05:52:22 +08:00
|
|
|
mgp->tx.boundary = 2048;
|
|
|
|
}
|
|
|
|
/*
|
|
|
|
* load the optimized firmware (which assumes aligned PCIe
|
|
|
|
* completions) in order to see if it works on this host.
|
|
|
|
*/
|
|
|
|
mgp->fw_name = myri10ge_fw_aligned;
|
|
|
|
status = myri10ge_load_firmware(mgp);
|
|
|
|
if (status != 0) {
|
|
|
|
goto abort;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable ECRC if possible
|
|
|
|
*/
|
|
|
|
myri10ge_enable_ecrc(mgp);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Run a DMA test which watches for unaligned completions and
|
|
|
|
* aborts on the first one seen.
|
|
|
|
*/
|
|
|
|
|
|
|
|
status = myri10ge_dma_test(mgp, MXGEFW_CMD_UNALIGNED_TEST);
|
|
|
|
if (status == 0)
|
|
|
|
return; /* keep the aligned firmware */
|
|
|
|
|
|
|
|
if (status != -E2BIG)
|
|
|
|
dev_warn(dev, "DMA test failed: %d\n", status);
|
|
|
|
if (status == -ENOSYS)
|
|
|
|
dev_warn(dev, "Falling back to ethp! "
|
|
|
|
"Please install up to date fw\n");
|
|
|
|
abort:
|
|
|
|
/* fall back to using the unaligned firmware */
|
2006-05-23 18:10:15 +08:00
|
|
|
mgp->tx.boundary = 2048;
|
|
|
|
mgp->fw_name = myri10ge_fw_unaligned;
|
|
|
|
|
2007-05-08 05:52:22 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void myri10ge_select_firmware(struct myri10ge_priv *mgp)
|
|
|
|
{
|
2006-05-23 18:10:15 +08:00
|
|
|
if (myri10ge_force_firmware == 0) {
|
2006-08-31 13:32:59 +08:00
|
|
|
int link_width, exp_cap;
|
|
|
|
u16 lnk;
|
|
|
|
|
|
|
|
exp_cap = pci_find_capability(mgp->pdev, PCI_CAP_ID_EXP);
|
|
|
|
pci_read_config_word(mgp->pdev, exp_cap + PCI_EXP_LNKSTA, &lnk);
|
|
|
|
link_width = (lnk >> 4) & 0x3f;
|
|
|
|
|
|
|
|
/* Check to see if Link is less than 8 or if the
|
|
|
|
* upstream bridge is known to provide aligned
|
|
|
|
* completions */
|
|
|
|
if (link_width < 8) {
|
|
|
|
dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
|
|
|
|
link_width);
|
|
|
|
mgp->tx.boundary = 4096;
|
|
|
|
mgp->fw_name = myri10ge_fw_aligned;
|
2007-05-08 05:52:22 +08:00
|
|
|
} else {
|
|
|
|
myri10ge_firmware_probe(mgp);
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (myri10ge_force_firmware == 1) {
|
|
|
|
dev_info(&mgp->pdev->dev,
|
|
|
|
"Assuming aligned completions (forced)\n");
|
|
|
|
mgp->tx.boundary = 4096;
|
|
|
|
mgp->fw_name = myri10ge_fw_aligned;
|
|
|
|
} else {
|
|
|
|
dev_info(&mgp->pdev->dev,
|
|
|
|
"Assuming unaligned completions (forced)\n");
|
|
|
|
mgp->tx.boundary = 2048;
|
|
|
|
mgp->fw_name = myri10ge_fw_unaligned;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (myri10ge_fw_name != NULL) {
|
|
|
|
dev_info(&mgp->pdev->dev, "overriding firmware to %s\n",
|
|
|
|
myri10ge_fw_name);
|
|
|
|
mgp->fw_name = myri10ge_fw_name;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct net_device *netdev;
|
|
|
|
|
|
|
|
mgp = pci_get_drvdata(pdev);
|
|
|
|
if (mgp == NULL)
|
|
|
|
return -EINVAL;
|
|
|
|
netdev = mgp->dev;
|
|
|
|
|
|
|
|
netif_device_detach(netdev);
|
|
|
|
if (netif_running(netdev)) {
|
|
|
|
printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
|
|
|
|
rtnl_lock();
|
|
|
|
myri10ge_close(netdev);
|
|
|
|
rtnl_unlock();
|
|
|
|
}
|
|
|
|
myri10ge_dummy_rdma(mgp, 0);
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_save_state(pdev);
|
2006-05-23 18:10:15 +08:00
|
|
|
pci_disable_device(pdev);
|
2006-12-18 18:52:34 +08:00
|
|
|
|
|
|
|
return pci_set_power_state(pdev, pci_choose_state(pdev, state));
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_resume(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct net_device *netdev;
|
|
|
|
int status;
|
|
|
|
u16 vendor;
|
|
|
|
|
|
|
|
mgp = pci_get_drvdata(pdev);
|
|
|
|
if (mgp == NULL)
|
|
|
|
return -EINVAL;
|
|
|
|
netdev = mgp->dev;
|
|
|
|
pci_set_power_state(pdev, 0); /* zeros conf space as a side effect */
|
|
|
|
msleep(5); /* give card time to respond */
|
|
|
|
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
|
|
|
|
if (vendor == 0xffff) {
|
|
|
|
printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
return -EIO;
|
|
|
|
}
|
2006-12-18 18:52:02 +08:00
|
|
|
|
2006-12-18 18:52:34 +08:00
|
|
|
status = pci_restore_state(pdev);
|
|
|
|
if (status)
|
|
|
|
return status;
|
2006-07-10 09:10:18 +08:00
|
|
|
|
|
|
|
status = pci_enable_device(pdev);
|
2006-12-18 18:52:34 +08:00
|
|
|
if (status) {
|
2006-07-10 09:10:18 +08:00
|
|
|
dev_err(&pdev->dev, "failed to enable device\n");
|
2006-12-18 18:52:34 +08:00
|
|
|
return status;
|
2006-07-10 09:10:18 +08:00
|
|
|
}
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
pci_set_master(pdev);
|
|
|
|
|
|
|
|
myri10ge_reset(mgp);
|
2006-08-09 12:07:53 +08:00
|
|
|
myri10ge_dummy_rdma(mgp, 1);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* Save configuration space to be restored if the
|
|
|
|
* nic resets due to a parity error */
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_save_state(pdev);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
if (netif_running(netdev)) {
|
|
|
|
rtnl_lock();
|
2006-12-18 18:50:40 +08:00
|
|
|
status = myri10ge_open(netdev);
|
2006-05-23 18:10:15 +08:00
|
|
|
rtnl_unlock();
|
2006-12-18 18:50:40 +08:00
|
|
|
if (status != 0)
|
|
|
|
goto abort_with_enabled;
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
netif_device_attach(netdev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2006-07-10 09:10:18 +08:00
|
|
|
abort_with_enabled:
|
|
|
|
pci_disable_device(pdev);
|
2006-05-23 18:10:15 +08:00
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
|
|
static u32 myri10ge_read_reboot(struct myri10ge_priv *mgp)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = mgp->pdev;
|
|
|
|
int vs = mgp->vendor_specific_offset;
|
|
|
|
u32 reboot;
|
|
|
|
|
|
|
|
/*enter read32 mode */
|
|
|
|
pci_write_config_byte(pdev, vs + 0x10, 0x3);
|
|
|
|
|
|
|
|
/*read REBOOT_STATUS (0xfffffff0) */
|
|
|
|
pci_write_config_dword(pdev, vs + 0x18, 0xfffffff0);
|
|
|
|
pci_read_config_dword(pdev, vs + 0x14, &reboot);
|
|
|
|
return reboot;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This watchdog is used to check whether the board has suffered
|
|
|
|
* from a parity error and needs to be recovered.
|
|
|
|
*/
|
2006-11-22 22:57:56 +08:00
|
|
|
static void myri10ge_watchdog(struct work_struct *work)
|
2006-05-23 18:10:15 +08:00
|
|
|
{
|
2006-11-22 22:57:56 +08:00
|
|
|
struct myri10ge_priv *mgp =
|
2006-12-11 18:24:37 +08:00
|
|
|
container_of(work, struct myri10ge_priv, watchdog_work);
|
2006-05-23 18:10:15 +08:00
|
|
|
u32 reboot;
|
|
|
|
int status;
|
|
|
|
u16 cmd, vendor;
|
|
|
|
|
|
|
|
mgp->watchdog_resets++;
|
|
|
|
pci_read_config_word(mgp->pdev, PCI_COMMAND, &cmd);
|
|
|
|
if ((cmd & PCI_COMMAND_MASTER) == 0) {
|
|
|
|
/* Bus master DMA disabled? Check to see
|
|
|
|
* if the card rebooted due to a parity error
|
|
|
|
* For now, just report it */
|
|
|
|
reboot = myri10ge_read_reboot(mgp);
|
|
|
|
printk(KERN_ERR
|
2007-06-12 02:26:31 +08:00
|
|
|
"myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
|
|
|
|
mgp->dev->name, reboot,
|
|
|
|
myri10ge_reset_recover ? " " : " not");
|
|
|
|
if (myri10ge_reset_recover == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
myri10ge_reset_recover--;
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
/*
|
|
|
|
* A rebooted nic will come back with config space as
|
|
|
|
* it was after power was applied to PCIe bus.
|
|
|
|
* Attempt to restore config space which was saved
|
|
|
|
* when the driver was loaded, or the last time the
|
|
|
|
* nic was resumed from power saving mode.
|
|
|
|
*/
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_restore_state(mgp->pdev);
|
2006-12-18 18:50:00 +08:00
|
|
|
|
|
|
|
/* save state again for accounting reasons */
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_save_state(mgp->pdev);
|
2006-12-18 18:50:00 +08:00
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
} else {
|
|
|
|
/* if we get back -1's from our slot, perhaps somebody
|
|
|
|
* powered off our card. Don't try to reset it in
|
|
|
|
* this case */
|
|
|
|
if (cmd == 0xffff) {
|
|
|
|
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
|
|
|
|
if (vendor == 0xffff) {
|
|
|
|
printk(KERN_ERR
|
|
|
|
"myri10ge: %s: device disappeared!\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* Perhaps it is a software error. Try to reset */
|
|
|
|
|
|
|
|
printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
printk(KERN_INFO "myri10ge: %s: %d %d %d %d %d\n",
|
|
|
|
mgp->dev->name, mgp->tx.req, mgp->tx.done,
|
|
|
|
mgp->tx.pkt_start, mgp->tx.pkt_done,
|
|
|
|
(int)ntohl(mgp->fw_stats->send_done_count));
|
|
|
|
msleep(2000);
|
|
|
|
printk(KERN_INFO "myri10ge: %s: %d %d %d %d %d\n",
|
|
|
|
mgp->dev->name, mgp->tx.req, mgp->tx.done,
|
|
|
|
mgp->tx.pkt_start, mgp->tx.pkt_done,
|
|
|
|
(int)ntohl(mgp->fw_stats->send_done_count));
|
|
|
|
}
|
|
|
|
rtnl_lock();
|
|
|
|
myri10ge_close(mgp->dev);
|
|
|
|
status = myri10ge_load_firmware(mgp);
|
|
|
|
if (status != 0)
|
|
|
|
printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
else
|
|
|
|
myri10ge_open(mgp->dev);
|
|
|
|
rtnl_unlock();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We use our own timer routine rather than relying upon
|
|
|
|
* netdev->tx_timeout because we have a very large hardware transmit
|
|
|
|
* queue. Due to the large queue, the netdev->tx_timeout function
|
|
|
|
* cannot detect a NIC with a parity error in a timely fashion if the
|
|
|
|
* NIC is lightly loaded.
|
|
|
|
*/
|
|
|
|
static void myri10ge_watchdog_timer(unsigned long arg)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
2007-08-09 15:02:14 +08:00
|
|
|
u32 rx_pause_cnt;
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
mgp = (struct myri10ge_priv *)arg;
|
2006-12-11 18:25:42 +08:00
|
|
|
|
|
|
|
if (mgp->rx_small.watchdog_needed) {
|
|
|
|
myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
|
|
|
|
mgp->small_bytes + MXGEFW_PAD, 1);
|
|
|
|
if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt >=
|
|
|
|
myri10ge_fill_thresh)
|
|
|
|
mgp->rx_small.watchdog_needed = 0;
|
|
|
|
}
|
|
|
|
if (mgp->rx_big.watchdog_needed) {
|
|
|
|
myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 1);
|
|
|
|
if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt >=
|
|
|
|
myri10ge_fill_thresh)
|
|
|
|
mgp->rx_big.watchdog_needed = 0;
|
|
|
|
}
|
2007-08-09 15:02:14 +08:00
|
|
|
rx_pause_cnt = ntohl(mgp->fw_stats->dropped_pause);
|
2006-12-11 18:25:42 +08:00
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
if (mgp->tx.req != mgp->tx.done &&
|
2006-07-30 12:14:15 +08:00
|
|
|
mgp->tx.done == mgp->watchdog_tx_done &&
|
2007-08-09 15:02:14 +08:00
|
|
|
mgp->watchdog_tx_req != mgp->watchdog_tx_done) {
|
2006-05-23 18:10:15 +08:00
|
|
|
/* nic seems like it might be stuck.. */
|
2007-08-09 15:02:14 +08:00
|
|
|
if (rx_pause_cnt != mgp->watchdog_pause) {
|
|
|
|
if (net_ratelimit())
|
|
|
|
printk(KERN_WARNING "myri10ge %s:"
|
|
|
|
"TX paused, check link partner\n",
|
|
|
|
mgp->dev->name);
|
|
|
|
} else {
|
|
|
|
schedule_work(&mgp->watchdog_work);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* rearm timer */
|
|
|
|
mod_timer(&mgp->watchdog_timer,
|
|
|
|
jiffies + myri10ge_watchdog_timeout * HZ);
|
2006-05-23 18:10:15 +08:00
|
|
|
mgp->watchdog_tx_done = mgp->tx.done;
|
2006-07-30 12:14:15 +08:00
|
|
|
mgp->watchdog_tx_req = mgp->tx.req;
|
2007-08-09 15:02:14 +08:00
|
|
|
mgp->watchdog_pause = rx_pause_cnt;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
|
|
{
|
|
|
|
struct net_device *netdev;
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
size_t bytes;
|
|
|
|
int i;
|
|
|
|
int status = -ENXIO;
|
|
|
|
int dac_enabled;
|
|
|
|
|
|
|
|
netdev = alloc_etherdev(sizeof(*mgp));
|
|
|
|
if (netdev == NULL) {
|
|
|
|
dev_err(dev, "Could not allocate ethernet device\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
2007-06-28 23:07:26 +08:00
|
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
mgp = netdev_priv(netdev);
|
|
|
|
mgp->dev = netdev;
|
2007-10-13 18:32:21 +08:00
|
|
|
netif_napi_add(netdev, &mgp->napi, myri10ge_poll, myri10ge_napi_weight);
|
2006-05-23 18:10:15 +08:00
|
|
|
mgp->pdev = pdev;
|
|
|
|
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
|
|
|
|
mgp->pause = myri10ge_flow_control;
|
|
|
|
mgp->intr_coal_delay = myri10ge_intr_coal_delay;
|
2006-08-22 05:36:49 +08:00
|
|
|
mgp->msg_enable = netif_msg_init(myri10ge_debug, MYRI10GE_MSG_DEFAULT);
|
2006-05-23 18:10:15 +08:00
|
|
|
init_waitqueue_head(&mgp->down_wq);
|
|
|
|
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
|
|
dev_err(&pdev->dev, "pci_enable_device call failed\n");
|
|
|
|
status = -ENODEV;
|
|
|
|
goto abort_with_netdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Find the vendor-specific cap so we can check
|
|
|
|
* the reboot register later on */
|
|
|
|
mgp->vendor_specific_offset
|
|
|
|
= pci_find_capability(pdev, PCI_CAP_ID_VNDR);
|
|
|
|
|
|
|
|
/* Set our max read request to 4KB */
|
2007-08-24 14:57:17 +08:00
|
|
|
status = pcie_set_readrq(pdev, 4096);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n",
|
|
|
|
status);
|
|
|
|
goto abort_with_netdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_set_master(pdev);
|
|
|
|
dac_enabled = 1;
|
|
|
|
status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
|
|
|
|
if (status != 0) {
|
|
|
|
dac_enabled = 0;
|
|
|
|
dev_err(&pdev->dev,
|
2007-10-18 18:06:30 +08:00
|
|
|
"64-bit pci address mask was refused, "
|
|
|
|
"trying 32-bit\n");
|
2006-05-23 18:10:15 +08:00
|
|
|
status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
|
|
}
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&pdev->dev, "Error %d setting DMA mask\n", status);
|
|
|
|
goto abort_with_netdev;
|
|
|
|
}
|
2006-06-08 22:25:00 +08:00
|
|
|
mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
|
|
|
&mgp->cmd_bus, GFP_KERNEL);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (mgp->cmd == NULL)
|
|
|
|
goto abort_with_netdev;
|
|
|
|
|
2006-06-08 22:25:00 +08:00
|
|
|
mgp->fw_stats = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
|
|
|
|
&mgp->fw_stats_bus, GFP_KERNEL);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (mgp->fw_stats == NULL)
|
|
|
|
goto abort_with_cmd;
|
|
|
|
|
|
|
|
mgp->board_span = pci_resource_len(pdev, 0);
|
|
|
|
mgp->iomem_base = pci_resource_start(pdev, 0);
|
|
|
|
mgp->mtrr = -1;
|
2007-03-08 03:02:32 +08:00
|
|
|
mgp->wc_enabled = 0;
|
2006-05-23 18:10:15 +08:00
|
|
|
#ifdef CONFIG_MTRR
|
|
|
|
mgp->mtrr = mtrr_add(mgp->iomem_base, mgp->board_span,
|
|
|
|
MTRR_TYPE_WRCOMB, 1);
|
2007-03-08 03:02:32 +08:00
|
|
|
if (mgp->mtrr >= 0)
|
|
|
|
mgp->wc_enabled = 1;
|
2006-05-23 18:10:15 +08:00
|
|
|
#endif
|
|
|
|
/* Hack. need to get rid of these magic numbers */
|
|
|
|
mgp->sram_size =
|
|
|
|
2 * 1024 * 1024 - (2 * (48 * 1024) + (32 * 1024)) - 0x100;
|
|
|
|
if (mgp->sram_size > mgp->board_span) {
|
|
|
|
dev_err(&pdev->dev, "board span %ld bytes too small\n",
|
|
|
|
mgp->board_span);
|
|
|
|
goto abort_with_wc;
|
|
|
|
}
|
|
|
|
mgp->sram = ioremap(mgp->iomem_base, mgp->board_span);
|
|
|
|
if (mgp->sram == NULL) {
|
|
|
|
dev_err(&pdev->dev, "ioremap failed for %ld bytes at 0x%lx\n",
|
|
|
|
mgp->board_span, mgp->iomem_base);
|
|
|
|
status = -ENXIO;
|
|
|
|
goto abort_with_wc;
|
|
|
|
}
|
|
|
|
memcpy_fromio(mgp->eeprom_strings,
|
|
|
|
mgp->sram + mgp->sram_size - MYRI10GE_EEPROM_STRINGS_SIZE,
|
|
|
|
MYRI10GE_EEPROM_STRINGS_SIZE);
|
|
|
|
memset(mgp->eeprom_strings + MYRI10GE_EEPROM_STRINGS_SIZE - 2, 0, 2);
|
|
|
|
status = myri10ge_read_mac_addr(mgp);
|
|
|
|
if (status)
|
|
|
|
goto abort_with_ioremap;
|
|
|
|
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
|
|
netdev->dev_addr[i] = mgp->mac_addr[i];
|
|
|
|
|
|
|
|
/* allocate rx done ring */
|
|
|
|
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
|
2006-06-08 22:25:00 +08:00
|
|
|
mgp->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
|
|
|
|
&mgp->rx_done.bus, GFP_KERNEL);
|
2006-05-23 18:10:15 +08:00
|
|
|
if (mgp->rx_done.entry == NULL)
|
|
|
|
goto abort_with_ioremap;
|
|
|
|
memset(mgp->rx_done.entry, 0, bytes);
|
|
|
|
|
2007-05-08 05:52:22 +08:00
|
|
|
myri10ge_select_firmware(mgp);
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
status = myri10ge_load_firmware(mgp);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&pdev->dev, "failed to load firmware\n");
|
|
|
|
goto abort_with_rx_done;
|
|
|
|
}
|
|
|
|
|
|
|
|
status = myri10ge_reset(mgp);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&pdev->dev, "failed reset\n");
|
|
|
|
goto abort_with_firmware;
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_set_drvdata(pdev, mgp);
|
|
|
|
if ((myri10ge_initial_mtu + ETH_HLEN) > MYRI10GE_MAX_ETHER_MTU)
|
|
|
|
myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
|
|
|
|
if ((myri10ge_initial_mtu + ETH_HLEN) < 68)
|
|
|
|
myri10ge_initial_mtu = 68;
|
|
|
|
netdev->mtu = myri10ge_initial_mtu;
|
|
|
|
netdev->open = myri10ge_open;
|
|
|
|
netdev->stop = myri10ge_close;
|
|
|
|
netdev->hard_start_xmit = myri10ge_xmit;
|
|
|
|
netdev->get_stats = myri10ge_get_stats;
|
|
|
|
netdev->base_addr = mgp->iomem_base;
|
|
|
|
netdev->change_mtu = myri10ge_change_mtu;
|
|
|
|
netdev->set_multicast_list = myri10ge_set_multicast_list;
|
|
|
|
netdev->set_mac_address = myri10ge_set_mac_address;
|
2007-10-13 18:34:01 +08:00
|
|
|
netdev->features = mgp->features;
|
2006-05-23 18:10:15 +08:00
|
|
|
if (dac_enabled)
|
|
|
|
netdev->features |= NETIF_F_HIGHDMA;
|
|
|
|
|
2007-01-10 04:05:04 +08:00
|
|
|
/* make sure we can get an irq, and that MSI can be
|
|
|
|
* setup (if available). Also ensure netdev->irq
|
|
|
|
* is set to correct value if MSI is enabled */
|
|
|
|
status = myri10ge_request_irq(mgp);
|
|
|
|
if (status != 0)
|
|
|
|
goto abort_with_firmware;
|
|
|
|
netdev->irq = pdev->irq;
|
|
|
|
myri10ge_free_irq(mgp);
|
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
/* Save configuration space to be restored if the
|
|
|
|
* nic resets due to a parity error */
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_save_state(pdev);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
/* Setup the watchdog timer */
|
|
|
|
setup_timer(&mgp->watchdog_timer, myri10ge_watchdog_timer,
|
|
|
|
(unsigned long)mgp);
|
|
|
|
|
|
|
|
SET_ETHTOOL_OPS(netdev, &myri10ge_ethtool_ops);
|
2006-11-22 22:57:56 +08:00
|
|
|
INIT_WORK(&mgp->watchdog_work, myri10ge_watchdog);
|
2006-05-23 18:10:15 +08:00
|
|
|
status = register_netdev(netdev);
|
|
|
|
if (status != 0) {
|
|
|
|
dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
|
2006-12-18 18:50:00 +08:00
|
|
|
goto abort_with_state;
|
2006-05-23 18:10:15 +08:00
|
|
|
}
|
2007-01-10 04:05:04 +08:00
|
|
|
dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
|
|
|
|
(mgp->msi_enabled ? "MSI" : "xPIC"),
|
|
|
|
netdev->irq, mgp->tx.boundary, mgp->fw_name,
|
2007-03-08 03:02:32 +08:00
|
|
|
(mgp->wc_enabled ? "Enabled" : "Disabled"));
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2006-12-18 18:50:00 +08:00
|
|
|
abort_with_state:
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_restore_state(pdev);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
abort_with_firmware:
|
|
|
|
myri10ge_dummy_rdma(mgp, 0);
|
|
|
|
|
|
|
|
abort_with_rx_done:
|
|
|
|
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
|
2006-06-08 22:25:00 +08:00
|
|
|
dma_free_coherent(&pdev->dev, bytes,
|
|
|
|
mgp->rx_done.entry, mgp->rx_done.bus);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
abort_with_ioremap:
|
|
|
|
iounmap(mgp->sram);
|
|
|
|
|
|
|
|
abort_with_wc:
|
|
|
|
#ifdef CONFIG_MTRR
|
|
|
|
if (mgp->mtrr >= 0)
|
|
|
|
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
|
|
|
|
#endif
|
2006-06-08 22:25:00 +08:00
|
|
|
dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
|
|
|
|
mgp->fw_stats, mgp->fw_stats_bus);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
abort_with_cmd:
|
2006-06-08 22:25:00 +08:00
|
|
|
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
|
|
|
mgp->cmd, mgp->cmd_bus);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
abort_with_netdev:
|
|
|
|
|
|
|
|
free_netdev(netdev);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* myri10ge_remove
|
|
|
|
*
|
|
|
|
* Does what is necessary to shutdown one Myrinet device. Called
|
|
|
|
* once for each Myrinet card by the kernel when a module is
|
|
|
|
* unloaded.
|
|
|
|
*/
|
|
|
|
static void myri10ge_remove(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
struct myri10ge_priv *mgp;
|
|
|
|
struct net_device *netdev;
|
|
|
|
size_t bytes;
|
|
|
|
|
|
|
|
mgp = pci_get_drvdata(pdev);
|
|
|
|
if (mgp == NULL)
|
|
|
|
return;
|
|
|
|
|
|
|
|
flush_scheduled_work();
|
|
|
|
netdev = mgp->dev;
|
|
|
|
unregister_netdev(netdev);
|
|
|
|
|
|
|
|
myri10ge_dummy_rdma(mgp, 0);
|
|
|
|
|
2006-12-18 18:50:00 +08:00
|
|
|
/* avoid a memory leak */
|
2006-12-18 18:52:02 +08:00
|
|
|
pci_restore_state(pdev);
|
2006-12-18 18:50:00 +08:00
|
|
|
|
2006-05-23 18:10:15 +08:00
|
|
|
bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
|
2006-06-08 22:25:00 +08:00
|
|
|
dma_free_coherent(&pdev->dev, bytes,
|
|
|
|
mgp->rx_done.entry, mgp->rx_done.bus);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
iounmap(mgp->sram);
|
|
|
|
|
|
|
|
#ifdef CONFIG_MTRR
|
|
|
|
if (mgp->mtrr >= 0)
|
|
|
|
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
|
|
|
|
#endif
|
2006-06-08 22:25:00 +08:00
|
|
|
dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
|
|
|
|
mgp->fw_stats, mgp->fw_stats_bus);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
2006-06-08 22:25:00 +08:00
|
|
|
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
|
|
|
|
mgp->cmd, mgp->cmd_bus);
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
free_netdev(netdev);
|
|
|
|
pci_set_drvdata(pdev, NULL);
|
|
|
|
}
|
|
|
|
|
2006-06-08 22:25:00 +08:00
|
|
|
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E 0x0008
|
2007-09-14 06:40:14 +08:00
|
|
|
#define PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9 0x0009
|
2006-05-23 18:10:15 +08:00
|
|
|
|
|
|
|
static struct pci_device_id myri10ge_pci_tbl[] = {
|
2006-06-08 22:25:00 +08:00
|
|
|
{PCI_DEVICE(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E)},
|
2007-09-14 06:40:14 +08:00
|
|
|
{PCI_DEVICE
|
|
|
|
(PCI_VENDOR_ID_MYRICOM, PCI_DEVICE_ID_MYRICOM_MYRI10GE_Z8E_9)},
|
2006-05-23 18:10:15 +08:00
|
|
|
{0},
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_driver myri10ge_driver = {
|
|
|
|
.name = "myri10ge",
|
|
|
|
.probe = myri10ge_probe,
|
|
|
|
.remove = myri10ge_remove,
|
|
|
|
.id_table = myri10ge_pci_tbl,
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
.suspend = myri10ge_suspend,
|
|
|
|
.resume = myri10ge_resume,
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
static __init int myri10ge_init_module(void)
|
|
|
|
{
|
|
|
|
printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
|
|
|
|
MYRI10GE_VERSION_STR);
|
|
|
|
return pci_register_driver(&myri10ge_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(myri10ge_init_module);
|
|
|
|
|
|
|
|
static __exit void myri10ge_cleanup_module(void)
|
|
|
|
{
|
|
|
|
pci_unregister_driver(&myri10ge_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_exit(myri10ge_cleanup_module);
|