linux/drivers/clocksource/timer-cs5535.c

189 lines
5.6 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Clock event driver for the CS5535/CS5536
*
* Copyright (C) 2006, Advanced Micro Devices, Inc.
* Copyright (C) 2007 Andres Salomon <dilinger@debian.org>
* Copyright (C) 2009 Andres Salomon <dilinger@collabora.co.uk>
*
* The MFGPTs are documented in AMD Geode CS5536 Companion Device Data Book.
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/cs5535.h>
#include <linux/clockchips.h>
#define DRV_NAME "cs5535-clockevt"
static int timer_irq;
Annotate hardware config module parameters in drivers/clocksource/ When the kernel is running in secure boot mode, we lock down the kernel to prevent userspace from modifying the running kernel image. Whilst this includes prohibiting access to things like /dev/mem, it must also prevent access by means of configuring driver modules in such a way as to cause a device to access or modify the kernel image. To this end, annotate module_param* statements that refer to hardware configuration and indicate for future reference what type of parameter they specify. The parameter parser in the core sees this information and can skip such parameters with an error message if the kernel is locked down. The module initialisation then runs as normal, but just sees whatever the default values for those parameters is. Note that we do still need to do the module initialisation because some drivers have viable defaults set in case parameters aren't specified and some drivers support automatic configuration (e.g. PNP or PCI) in addition to manually coded parameters. This patch annotates drivers in drivers/clocksource/. [Note: With regard to cs5535-clockevt.c, Thomas Gleixner asked whether the timer_irq parameter is required for the driver to work on anything other than arbitrary hardware which has it mapped to 0. Jens Rottmann replied that the parameter defaults to 0, which means: 1. autodetect (=keep IRQ BIOS has set up) 2. if that fails use CONFIG_CS5535_MFGPT_DEFAULT_IRQ (see drivers/misc/cs5535-mfgpt.c: cs5535_mfgpt_set_irq()) Jens further noted that there may not be any systems that have CS5535/36 devices that support EFI and secure boot.] Suggested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> cc: Daniel Lezcano <daniel.lezcano@linaro.org> cc: Thomas Gleixner <tglx@linutronix.de> cc: Jens Rottmann <Jens.Rottmann@ADLINKtech.com> cc: linux-kernel@vger.kernel.org
2017-04-04 23:54:22 +08:00
module_param_hw_named(irq, timer_irq, int, irq, 0644);
MODULE_PARM_DESC(irq, "Which IRQ to use for the clock source MFGPT ticks.");
/*
* We are using the 32.768kHz input clock - it's the only one that has the
* ranges we find desirable. The following table lists the suitable
* divisors and the associated Hz, minimum interval and the maximum interval:
*
* Divisor Hz Min Delta (s) Max Delta (s)
* 1 32768 .00048828125 2.000
* 2 16384 .0009765625 4.000
* 4 8192 .001953125 8.000
* 8 4096 .00390625 16.000
* 16 2048 .0078125 32.000
* 32 1024 .015625 64.000
* 64 512 .03125 128.000
* 128 256 .0625 256.000
* 256 128 .125 512.000
*/
static struct cs5535_mfgpt_timer *cs5535_event_clock;
/* Selected from the table above */
#define MFGPT_DIVISOR 16
#define MFGPT_SCALE 4 /* divisor = 2^(scale) */
#define MFGPT_HZ (32768 / MFGPT_DIVISOR)
#define MFGPT_PERIODIC (MFGPT_HZ / HZ)
/*
* The MFGPT timers on the CS5536 provide us with suitable timers to use
* as clock event sources - not as good as a HPET or APIC, but certainly
* better than the PIT. This isn't a general purpose MFGPT driver, but
* a simplified one designed specifically to act as a clock event source.
* For full details about the MFGPT, please consult the CS5536 data sheet.
*/
static void disable_timer(struct cs5535_mfgpt_timer *timer)
{
/* avoid races by clearing CMP1 and CMP2 unconditionally */
cs5535_mfgpt_write(timer, MFGPT_REG_SETUP,
(uint16_t) ~MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP1 |
MFGPT_SETUP_CMP2);
}
static void start_timer(struct cs5535_mfgpt_timer *timer, uint16_t delta)
{
cs5535_mfgpt_write(timer, MFGPT_REG_CMP2, delta);
cs5535_mfgpt_write(timer, MFGPT_REG_COUNTER, 0);
cs5535_mfgpt_write(timer, MFGPT_REG_SETUP,
MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
}
static int mfgpt_shutdown(struct clock_event_device *evt)
{
disable_timer(cs5535_event_clock);
return 0;
}
static int mfgpt_set_periodic(struct clock_event_device *evt)
{
disable_timer(cs5535_event_clock);
start_timer(cs5535_event_clock, MFGPT_PERIODIC);
return 0;
}
static int mfgpt_next_event(unsigned long delta, struct clock_event_device *evt)
{
start_timer(cs5535_event_clock, delta);
return 0;
}
static struct clock_event_device cs5535_clockevent = {
.name = DRV_NAME,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_state_shutdown = mfgpt_shutdown,
.set_state_periodic = mfgpt_set_periodic,
.set_state_oneshot = mfgpt_shutdown,
.tick_resume = mfgpt_shutdown,
.set_next_event = mfgpt_next_event,
.rating = 250,
};
static irqreturn_t mfgpt_tick(int irq, void *dev_id)
{
uint16_t val = cs5535_mfgpt_read(cs5535_event_clock, MFGPT_REG_SETUP);
/* See if the interrupt was for us */
if (!(val & (MFGPT_SETUP_SETUP | MFGPT_SETUP_CMP2 | MFGPT_SETUP_CMP1)))
return IRQ_NONE;
/* Turn off the clock (and clear the event) */
disable_timer(cs5535_event_clock);
if (clockevent_state_detached(&cs5535_clockevent) ||
clockevent_state_shutdown(&cs5535_clockevent))
return IRQ_HANDLED;
/* Clear the counter */
cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_COUNTER, 0);
/* Restart the clock in periodic mode */
if (clockevent_state_periodic(&cs5535_clockevent))
cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
cs5535_clockevent.event_handler(&cs5535_clockevent);
return IRQ_HANDLED;
}
static int __init cs5535_mfgpt_init(void)
{
unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED;
struct cs5535_mfgpt_timer *timer;
int ret;
uint16_t val;
timer = cs5535_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
if (!timer) {
printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n");
return -ENODEV;
}
cs5535_event_clock = timer;
/* Set up the IRQ on the MFGPT side */
if (cs5535_mfgpt_setup_irq(timer, MFGPT_CMP2, &timer_irq)) {
printk(KERN_ERR DRV_NAME ": Could not set up IRQ %d\n",
timer_irq);
goto err_timer;
}
/* And register it with the kernel */
ret = request_irq(timer_irq, mfgpt_tick, flags, DRV_NAME, timer);
if (ret) {
printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
goto err_irq;
}
/* Set the clock scale and enable the event mode for CMP2 */
val = MFGPT_SCALE | (3 << 8);
cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
/* Set up the clock event */
printk(KERN_INFO DRV_NAME
": Registering MFGPT timer as a clock event, using IRQ %d\n",
timer_irq);
clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
0xF, 0xFFFE);
return 0;
err_irq:
cs5535_mfgpt_release_irq(cs5535_event_clock, MFGPT_CMP2, &timer_irq);
err_timer:
cs5535_mfgpt_free_timer(cs5535_event_clock);
printk(KERN_ERR DRV_NAME ": Unable to set up the MFGPT clock source\n");
return -EIO;
}
module_init(cs5535_mfgpt_init);
MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>");
MODULE_DESCRIPTION("CS5535/CS5536 MFGPT clock event driver");
MODULE_LICENSE("GPL");